A novel voltammetric sensor for sensitive detection of mercury(II) ions using glassy carbon electrode modified with graphene-based ion imprinted polymer

Advancements in mercury detection using surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs): a review

Mercury (Hg) contamination remains a major environmental concern primarily due to its presence at trace levels, making monitoring the concentration of Hg challenging. Sensitivity and selectivity are significant challenges in the development of mercury sensors. Surface-enhanced Raman spectroscopy (SERS) and ion-imprinted polymers (IIPs) are two distinct analytical methods developed and employed for mercury detection. In this review, we provide an overview of the key aspects of SERS and IIP methodologies, focusing on the recent advances in sensitivity and selectivity for mercury detection. By examining the critical parameters and challenges commonly encountered in this area of research, as reported in the literature, we present a set of recommendations. These recommendations cover solid and colloidal SERS substrates, appropriate Raman reporter/probe molecules, and customization of IIPs for mercury sensing and removal. Furthermore, we provide a perspective on the potential integration of SERS with IIPs to achieve enhanced sensitivity and selectivity in mercury detection. Our aim is to foster the establishment of a SERS-IIP hybrid method as a robust analytical tool for mercury detection across diverse fields.

Preparation of a novel DNA-imprinted sensor based on chitosan and its highly sensitive detection of Pb2

Lead ion is very harmful to the environment, so it is very important to study its detection methods. In this study, a novel electrochemical sensor was constructed by modifying deoxyribonucleic acid (DNA) on the electrode, which can be used for the detection of Pb2+ in the environment. Part of the mixed solution of chitosan (CS) and Pb2+ template ions was dropped onto the surface of a glassy carbon electrode. CS-Pb2+ film was cross-linked through sodium tripolyphosphate. And a novel DNA-imprinted sensor was prepared by electrodepositing CS-Pb2+ thin film with gold nanoparticles (AuNPs), removing Pb2+ templates, and immobilizing specific double-stranded DNA. The electroactive area, surface morphology, sensitivity, and electrochemical reaction mechanism of the DNA-imprinted sensor were analyzed. The elementary reaction steps were studied through electrochemical reaction kinetics analysis. The experimental results indicate that the DNA-imprinted electrochemical biosensor can quantitatively detect Pb2+ in the range of 10-100 μM (R2 = 0.9935), and its detection limit is 6.5074 μM (3σ/slope). The sensitivity of the electrochemical biosensor is 1.55233 × 10-6 A/μM, and its active areas is 6.233 cm2. The desorption mechanism and adsorption mechanism have been explored through dynamic parameter analysis. The novel DNA imprinted electrochemical biosensor developed in this paper provides a robust method for detecting lead ions in solution. Additionally, it establishes a solid groundwork for detecting other metal ions.

Impedimetric aptasensor based on MOF based composite for measuring of carcinoembryonic antigen as a tumor biomarker

In this research, gold nanoparticle (GNPs)-modified metal-organic framework/reduced graphene oxide (MOF(801)/rGO) hybrid was employed to design a new aptasensor for carcinoembryonic antigen (CEA) quantification in biological sample. The sensing ability of the electrode for CEA biomarker was examined with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry procedures. Besides, CEA was electrochemically quantified by the EIS method. With respect to the high surface-to-volume ratio of MOF(801) and the good electron transfer ability of rGO, the proposed sensor displayed notable sensitivity and reliability in the CEA analysis. The derived electrode showed an appreciable detection limit of 0.8 pg L-1 using EIS protocol. In addition, the present aptasensor revealed diverse advantages including anti-interference property, wide linear range (0.0025-0.25 ng L-1), convenience and high efficiency toward CEA quantification. More importantly, the performance of the suggested assay remains unchanged in analysis of CEA in body fluids. The established assay demonstrates that the suggested biosensor is a promising device in clinical diagnosis.

A strategy for As(III) determination based on ultrafine gold nanoparticles decorated on magnetic graphene oxide

In this work, a new dendrimer modified magnetic graphene oxide (GO) was used as a substrate for electrodeposition of Au nanoparticles. The modified magnetic electrode was employed for sensitive measuring of As(III) ion as a well-established human carcinogen. The prepared electrochemical device exhibits excellent activity towards As(III) detection using the square wave anodic stripping voltammetry (SWASV) protocol. At optimum conditions (deposition potential at -0.5 V for 100 s in 0.1 M acetate buffer with pH 5.0), a linear range from 1.0 to 125.0 μgL-1 with a low detection limit (calculated by S/N = 3) of 0.47 μg L-1 was obtained. In addition to the simplicity and sensitivity of the proposed sensor, its high selectivity against some major interfering agents, such as Cu(II) and Hg(II) makes it an appreciable sensing tool for the screening of As(III). In addition, the sensor revealed satisfactory results for detection of As(III) in different water samples, and the accuracy of obtained data were confirmed by inductively coupled plasma atomic emission spectroscopy (ICP-AES) setup. Accounting for the high sensitivity, remarkable selectivity and good reproducibility, the established electrochemical strategy has great potential for analysis of As(III) in environmental matrices.

Fully optimized new sensitive electrochemical device for the selective determination of 6-thioguanine anticancer drug in wastewater and biological samples

In present work, a novel voltammetric sensor for the determination of 6-thioguanine (6-TG) was fabricated. First, a graphite rod electrode (GRE) surface was modified via drop-coating of graphene oxide (GO) to increase the surface area of the electrode. Subsequently, molecularly imprinted polymer (MIP) network was prepared using a facile electro-polymerization procedure, using o-aminophenol (as functional monomer) and 6-TG (as template molecule). Influences of test solution pH, dropped GO concentration and incubation time on the performance of GRE-GO/MIP were studied, and their values determined as 7.0, 1.0 mg/mL and 90 s, respectively. Using GRE-GO/MIP, 6-TG was measured in the range of 0.5-60 μM with a low detection limit (DL) of 80 nM (based on S/N = 3). In addition, the electrochemical device demonstrated good reproducibility (3.8%) and anti-interference ability toward 6-TG monitoring. The as-prepared sensor illustrated satisfactory sensing performance in real samples with recovery ranging from 96.5% to 102.5%. For the determination of trace amounts of anticancer drug (6-TG) in real matrices (biological samples and pharmaceutical wastewater sample), this study is expected to provide an effective strategy with high selectivity, stability, and sensitivity.

Inkjet-printed flexible graphene paper electrode for the electrochemical determination of mercury

Here, we report an inkjet-printed graphene paper electrode (IP-GPE) for the electrochemical analysis of mercuric ions (Hg(ii)) in industrial wastewater samples. Graphene (Gr) fabricated on a paper substrate was prepared by a facile solution-phase exfoliation method in which ethyl cellulose (EC) behaves as a stabilizing agent. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to determine the shape and multiple layers of Gr. The crystalline structure and ordered lattice carbon of Gr were confirmed by X-ray diffraction (XRD) and Raman spectroscopy. The nano-ink of Gr-EC was fabricated on the paper substance via an inkjet printer (HP-1112) and IP-GPE was exploited as a working electrode in linear sweep voltammetry (LSV) and cyclic voltammetry (CV) for the electrochemical detection of Hg(ii). The electrochemical detection is found to be diffusion-controlled illustrated by obtaining a correlation coefficient of 0.95 in CV. The present method exhibits a better linear range of 2-100 μM with a limit of detection (LOD) of 0.862 μM for the determination of Hg(ii). The application of IP-GPE in electrochemical analysis shows a user-friendly, facile, and economical method for the quantitative determination of Hg(ii) in municipal wastewater samples.

Efficient cobalt hydroxide nanosheets for enhanced electrochemical sensing of Hg (II) ion

A sensitive electrochemical device was suggested via the modification of a simple graphite rod electrode (GRE) with cobalt hydroxide (Co(OH)₂) nanosheets. After closed circuit process on the modified electrode, the anodic stripping voltammetry (ASV) technique was used for measuring of Hg(II). In optimal experimental conditions, the suggested assay depicted a linear response over a broad range in the range 0.25-30 μg L^-1, with the lowest detection limit of 0.07 μg L^-1. Besides good selectivity, the sensor also indicated excellent reproducibility with a relative standard deviation (RSD) value of 2.9%. Moreover, the Co(OH)₂-GRE showed satisfactory sensing performance in real water samples with appropriate recovery values (96.0-102.5%). Additionally, possible interfering cations were examined, but no significant interference was found. By taking some merits such high sensitivity, remarkable selectivity and good precision, this strategy is expected to provide an efficient protocol for the electrochemical measuring of toxic Hg(II) in environmental matrices.

The elimination and extraction of organosulfur compounds from real water and soil samples using metal organic framework/graphene oxide as a novel and efficient nanocomposite

In the present work, an efficient metal organic framework/graphene oxide (MOF-801/GO) sorbent was fabricated and employed for the detection of organosulfur pesticides (OSPs) in real samples using gas chromatography-flame photometric detection (GC-FPD). The optimal extraction parameters for the suggested solid-phase extraction (SPE) include sorbent amount (60 mg), extraction solvent (acetonitrile) and extraction time (5 min). The linear dynamic ranges and detection limits for organosulfur pesticides (OSPs) samples under above extraction conditions were ranged from 0.5 to 300 μg L^-1 and 0.1-1.1 μg L^-1, respectively. Moreover, the proposed SPE/GC-FDP method was applied for the analysis of pesticides in different real environmental water and soil samples. The obtained recoveries of the analytes in were between 92.0 and 106.8% and relative standard deviation (RSD) values were lower than 9.2%. The application of the MOF-801/GO as a sorbent in dSPE of OSPs analytes showed to be reliable, fast and sensible methodology for pesticides monitoring in different environmental samples.

Nanomaterials-Based Ion-Imprinted Electrochemical Sensors for Heavy Metal Ions Detection: A Review

Heavy metal ions (HMIs) pose a serious threat to the environment and human body because they are toxic and non-biodegradable and widely exist in environmental ecosystems. It is necessary to develop a rapid, sensitive and convenient method for HMIs detection to provide a strong guarantee for ecology and human health. Ion-imprinted electrochemical sensors (IIECSs) based on nanomaterials have been regarded as an excellent technology because of the good selectivity, the advantages of fast detection speed, low cost, and portability. Electrode surfaces modified with nanomaterials can obtain excellent nano-effects, such as size effect, macroscopic quantum tunneling effect and surface effect, which greatly improve its surface area and conductivity, so as to improve the detection sensitivity and reduce the detection limit of the sensor. Hence, the present review focused on the fundamentals and the synthetic strategies of ion-imprinted polymers (IIPs) and IIECSs for HMIs detection, as well as the applications of various nanomaterials as modifiers and sensitizers in the construction of HMIIECSs and the influence on the sensing performance of the fabricated sensors. Finally, the potential challenges and outlook on the future development of the HMIIECSs technology were also highlighted. By means of the points presented in this review, we hope to provide some help in further developing the preparation methods of high-performance HMIIECSs and expanding their potential applications.

A Critical Review on the Use of Molecular Imprinting for Trace Heavy Metal and Micropollutant Detection

Molecular recognition has been described as the “ultimate” form of sensing and plays a fundamental role in biological processes. There is a move towards biomimetic recognition elements to overcome inherent problems of natural receptors such as limited stability, high-cost, and variation in response. In recent years, several alternatives have emerged which have found their first commercial applications. In this review, we focus on molecularly imprinted polymers (MIPs) since they present an attractive alternative due to recent breakthroughs in polymer science and nanotechnology. For example, innovative solid-phase synthesis methods can produce MIPs with sometimes greater affinities than natural receptors. Although industry and environmental agencies require sensors for continuous monitoring, the regulatory barrier for employing MIP-based sensors is still low for environmental applications. Despite this, there are currently no sensors in this area, which is likely due to low profitability and the need for new legislation to promote the development of MIP-based sensors for pollutant and heavy metal monitoring. The increased demand for point-of-use devices and home testing kits is driving an exponential growth in biosensor production, leading to an expected market value of over GPB 25 billion by 2023. A key requirement of point-of-use devices is portability, since the test must be conducted at “the time and place” to pinpoint sources of contamination in food and/or water samples. Therefore, this review will focus on MIP-based sensors for monitoring pollutants and heavy metals by critically evaluating relevant literature sources from 1993 to 2022.

Construction and application of a novel electrochemical sensor for trace determination of uranium based on ion-imprinted polymers modified glassy carbon electrode

In the present work, a novel electrochemical sensor modified glassy carbon electrode with ion-imprinted polymers (IIP-GCE) was applied for uranyl ions (UO₂²⁺) determination. Surface modifier was synthesized through precipitation polymerization method, using acrylic acid as a monomer, benzoyl peroxide (BPO) as initiator, and trimethylolpropane triacrylate (TMPTA) as cross-linker. A new uranyl-trans-3-(3-pyridyl) acrylic acid complex was employed, serving as an active and specific site on the synthesized modifier. Next, the synthesized modifier was characterized using X-ray diffraction (XRD), Scanning Electron microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FT-IR) techniques. UO₂²⁺ ions were detected using a differential pulse adsorptive anodic stripping voltammetry method. Under the optimized conditions (pH = 8.0, pre-concentration time = 10 min and pre-concentration potential = -0.30 V), the modified electrode exhibited linear behavior in the interval of 1.27-95.49 μg.L^-1 with a limit of detection (LOD) of 0.43 μg.L^-1. Also, the constructed ion-imprinted sensor showed a successful application for determining UO₂²⁺ ions with recovery range of 97.6-101% in real samples.

Application of Molecularly Imprinted Polymers in the Analysis of Waters and Wastewaters

The increase of the global population and shortage of renewable water resources urges the development of possible remedies to improve the quality and reusability of waste and contaminated water supplies. Different water pollutants, such as heavy metals, dyes, pesticides, endocrine disrupting compounds (EDCs), and pharmaceuticals, are produced through continuous technical and industrial developments that are emerging with the increasing population. Molecularly imprinted polymers (MIPs) represent a class of synthetic receptors that can be produced from different types of polymerization reactions between a target template and functional monomer(s), having functional groups specifically interacting with the template; such interactions can be tailored according to the purpose of designing the polymer and based on the nature of the target compounds. The removal of the template using suitable knocking out agents renders a recognition cavity that can specifically rebind to the target template which is the main mechanism of the applicability of MIPs in electrochemical sensors and as solid phase extraction sorbents. MIPs have unique properties in terms of stability, selectivity, and resistance to acids and bases besides being of low cost and simple to prepare; thus, they are excellent materials to be used for water analysis. The current review represents the different applications of MIPs in the past five years for the detection of different classes of water and wastewater contaminants and possible approaches for future applications.

A novel highly efficient and ultrasensitive electrochemical detection of toxic mercury (II) ions in canned tuna fish and tap water based on a copper metal-organic framework

Invisible mercury ion is an incredibly toxic pollutant to the atmosphere. Thus a quick and sensitive detection method is of considerable importance for toxicological assessment, environmental protection and human health. A novel electrochemical sensing system has been developed for the detection of mercury (Hg²⁺) ions in canned tuna fish and tap water. The sensing platform was developed on the cubic copper-metal-organic framework (Cu-MOF) based nanoparticles. Cu-MOF has a porous architecture with a large, unique surface area that is favorable for mercury ions adsorption and preconcentration. The electrochemical properties of Cu-MOF nanoparticles modified electrode were investigated. Differential pulse voltammetry (DPV) and cyclic voltammetry (CV) were applied for the detection of mercury in 0.1 M phosphate buffer (PB) at pH 9 under ambient conditions. Under optimized conditions, the limit of detection (LOD) for Hg²⁺ is around 0.0633 nM with a linear range of 0.1-50 nM. Cu-MOF nanoparticles were successfully applied to the analysis of mercury ions in canned tuna fish and tap water. The developed sensor demonstrated satisfactory anti-interference, reproducibility, reliability, repeatability and applicability for the detection of mercury ions. This proof of principle serves as a steppingstone towards promoting ultrasensitive and precise assay for the detection of mercury.

A Critical Review on the Synthesis and Application of Ion-Imprinted Polymers for Selective Preconcentration, Speciation, Removal and Determination of Trace and Essential Metals from Different Matrices

The presence of toxic trace metals and high concentrations of essential elements in the environment presents a serious threat to living organism. Various methods have been used for the detection, preconcentration and remediation of these metals from biological, environmental and food matrices. Owing to the complexicity of samples, methods with high selectivity have been used for detection, preconcentration and remediation of these trace metals. These methods are achieved by the use of ion-imprinted polymers (IIPs) due to their impressive properties such as selectivity, high extraction efficiency, speciation capability and reusability. Because of the increase of toxic trace and essential metals in the environment, IIPs have attracted great use in analytical chemistry. This review, provide a brief background on IIPs and polymerization method that are used for their preparation. Recent applications of IIPs as adsorbents for preconcentration, removal, speciation and electrochemical detection of trace and essential metal is also discussed.

A new 1,2,3-triazole and its rhodamine B derivatives as a fluorescence probe for mercury ions

A newly synthesized compound, 5-methyl-1-phenyl-1H-1,2,3-triazole-4- carboxylic acid (MPC) was analyzed for its quantum chemical parameters and theoretical spectrum by computational chemistry. The calculated spectrum was in accord with the experimental measurements in a great degree. Then MPC was successfully designed and synthesized to a novel rhodamine B derivative RMPC. The RMPC exhibited about a 4000-fold increase in fluorescence intensity in the presence of Hg²⁺ ions over most other competitive metal ions. The triazole appended colorless chemodosimeter RMPC turns to pink upon the complex formation only with Hg²⁺ ions as a 1: 2 M ratio and enables naked-eye detection. The coordination mechanism of turning on/off fluorescence for Hg²⁺ ions were well proposed by explaining Hg²⁺ inducing the ring-opened rhodamine B moiety. The fluorescence imaging experiments of Hg²⁺ in HeLa cell demonstrated that the probe was labeled and it could be used in biological systems.

The Use of Aptamers and Molecularly Imprinted Polymers in Biosensors for Environmental Monitoring: A Tale of Two Receptors

Effective molecular recognition remains a major challenge in the development of robust receptors for biosensing applications. Over the last three decades, aptamers and molecularly imprinted polymers (MIPs) have emerged as the receptors of choice for use in biosensors as viable alternatives to natural antibodies, due to their superior stability, comparable binding performance, and lower costs. Although both of these technologies have been developed in parallel, they both suffer from their own unique problems. In this review, we will compare and contrast both types of receptor, with a focus on the area of environmental monitoring. Firstly, we will discuss the strategies and challenges involved in their development. We will also discuss the challenges that are involved in interfacing them with the biosensors. We will then compare and contrast their performance with a focus on their use in the detection of environmental contaminants, namely, antibiotics, pesticides, heavy metals, and pathogens detection. Finally, we will discuss the future direction of these two technologies.

Single-Atom Enzyme-Functionalized Solution-Gated Graphene Transistor for Real-Time Detection of Mercury Ion

Mercury ion (Hg²⁺), a bioaccumulating and toxic heavy metal, can cause severe damages to the environment and human health. Therefore, development of high-performance Hg²⁺ sensors is highly desirable. Herein, we construct a uniform dodecahedral shaped N-doped carbon decorated by single Fe site enzyme (Fe-N-C SAE), which exhibits good performance for Hg²⁺ detection. The N atom on Fe-N-C SAE can specifically recognize Hg²⁺ through chelation between Hg²⁺ and N atom, while the catalytic site on the single-atom enzyme acts as a signal amplifier. The Fe-N-C SAE-functionalized solution-gated graphene transistor exhibits a dramatic improvement in the selectivity and sensitivity of the devices. The sensor can rapidly detect Hg²⁺ down to 1 nM within 2 s. Besides, a relatively good repeatability and reproducibility for the detection of Hg²⁺ have also been found in our sensor platform. Our findings expand the application of single-atom catalysts in the field of food safety and environmental monitoring.

Synthesis of bifunctional cabbage flower-like Ho3+/NiO nanostructures as a modifier for simultaneous determination of methotrexate and carbamazepine

Cabbage flower-like Ho³⁺/NiO nanostructure (CFL-Ho³⁺/NiO NSs) with significant electrocatalytic oxidation has been published for the first time. First, structure and morphology of CFL-Ho³⁺/NiO-NSs have been described by XRD, SEM, and EDX methods. Then, CFL-Ho³⁺/NiO-NSs have been applied as a modifier for simultaneous electrochemical detection of methotrexate (MTX) and carbamazepine (CBZ). Functions of the modified electrode have been dealt with through electrochemical impedance spectroscopy (EIS). It has been demonstrated that the electrode response has been linear from 0.001-310.0 μM with a limit of detection of 5.2 nM and 4.5 nM (3 s/m) through DPV for MTX and CBZ. Diffusion coefficient (D) and heterogeneous rate constant (k_h) have been detected for MTX and CBZ oxidation at the surface of the modified electrode. Moreover, CFL-Ho³⁺/NiO-NS/GCE has been employed for determining MTX and CBZ in urine and drug specimens. Outputs showed the analyte acceptable recovery. Therefore, the electrode could be applied to analyze both analytes in drug prescription and clinical laboratories. Graphical abstract Electrochemical sensor based on bifunctional cabbage flower-like Ho³⁺/NiO nanostructures modified glassy carbon electrode for simultaneous detecting methotrexate and carbamazepine was fabricated.

Sensor-as-a-Service: Convergence of Sensor Analytic Point Solutions (SNAPS) and Pay-A-Penny-Per-Use (PAPPU) Paradigm as a Catalyst for Democratization of Healthcare in Underserved Communities

In this manuscript, we discuss relevant socioeconomic factors for developing and implementing sensor analytic point solutions (SNAPS) as point-of-care tools to serve impoverished communities. The distinct economic, environmental, cultural, and ethical paradigms that affect economically disadvantaged users add complexity to the process of technology development and deployment beyond the science and engineering issues. We begin by contextualizing the environmental burden of disease in select low-income regions around the world, including environmental hazards at work, home, and the broader community environment, where SNAPS may be helpful in the prevention and mitigation of human exposure to harmful biological vectors and chemical agents. We offer examples of SNAPS designed for economically disadvantaged users, specifically for supporting decision-making in cases of tuberculosis (TB) infection and mercury exposure. We follow-up by discussing the economic challenges that are involved in the phased implementation of diagnostic tools in low-income markets and describe a micropayment-based systems-as-a-service approach (pay-a-penny-per-use-PAPPU), which may be catalytic for the adoption of low-end, low-margin, low-research, and the development SNAPS. Finally, we provide some insights into the social and ethical considerations for the assimilation of SNAPS to improve health outcomes in marginalized communities.

An Application of a Schiff-Base Type Reaction in the Synthesis of a New Rhodamine-Based Hg(II)-Sensing Agent

A facile synthesis procedure, whereby 9-Anthraldehyde (AA) is coupled to aminated rhodamine (AR) via a Schiff base-type reaction, is reported. The applicability and performance of the obtained material (AA-AR) as a sensing agent was studied towards 16 metal cations (i.e. Li⁺, Na⁺, Ag⁺, Ca²⁺, Ba²⁺, Co²⁺, Cs⁺, Cu²⁺, Mg²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Ni²⁺, Sr²⁺, Zn²⁺, Al³⁺). Among the studied metals, an extraordinary selectivity was observed for Hg²⁺, and the observed selectivity was found not to be influenced by the presence of other cations and some common anions (i.e. Br^-, Cl^-, I^-, HPO₄^2-, H₂PO₄^-, NO₃^-, NO₂^-, ClO₄^-, AcO^-, HSO₄^-, SO₄^2-, Cr₂O₇^-, CO₃^2-, OH^- and HCO₃^-). The material, AA-AR, exhibited such a high selectivity and sensitivity towards Hg²⁺ that it could be detected even by naked eyes. The Hg²⁺-sensing property of AA-AR was found not to be limited to colorimetric detections so that a high fluorescent nature of the compound was also observed upon binding Hg²⁺ ion. The detection limit, which is correspondent to fluorescence emission intensity, was found as 0.87 μM. The underlying mechanism of sensing property was studied by using some spectroscopic techniques such as FT-IR, ¹H-NMR, ¹³C-NMR, and UV-Vis. (Job-plot). In the final course of the experiments, the performance of AA-AR in cell-imaging was also studied, and even trace amounts of Hg²⁺ in living cells could be detected by the studied probe. Thus, the applicability of a new synthesis approach in producing a highly efficient new fluorescence sensor for the detection of Hg²⁺ ions is discussed in detail.

Synthesis and application of ion-imprinted polymer for the determination of mercury II in water samples

In this study, an innovative analytical methodology capable of selectively identifying and quantifying mercury contamination by the association of solid-phase extraction using ion-imprinted polymers as a sorbent phase and differential pulse anodic stripping voltammetry is proposed. To this end, the ion-imprinted polymers were synthesized and characterized by infrared spectroscopy and atomic force microscopy. The sorption capacities and the selectivity of the ion-imprinted polymers were compared to the ones related to the non-imprinted ones. Next, the experimental parameters of this solid-phase extraction method (IIP-SPE) were evaluated univariately. The selectivity of this polymeric matrix against other cations (Cd II, Pb II, and Cu II) was also evaluated. Limits of detection (LOD) and quantification (LOQ) obtained for the here proposed methodology were 0.322 μg L^-1 and 1.08 μg L^-1, respectively. Also, the precision of 4.0% was achieved. The method was finally applied to three water samples from different sources: for the Piratininga and Itaipu Lagoon waters, Hg II concentrations were below the LOQ and for Vargem River waters a concentration equal to 1.35 ± 0.07 mg L^-1 was determined. These results were confirmed by recovery tests, resulting in a recovery of 96.2 ± 4.0%, and by comparison with flame atomic absorption spectrometry, resulting in statistical conformity between the two methods at 95% confidence level.

Synergic effect of plasmonic gold nanoparticles and graphene oxide on the performance of glucose sensing

A highly sensitive Au–GO hybrid nanostructure based non-enzymatic glucose biosensor is fabricated and exhibits superior sensitivity of 84.53 μA mM⁻¹ cm⁻². The biosensor also has applications for the detection of glucose in human blood serum, food samples and drinks.

Facile Synthesis of Hypercrosslinked Hollow Microporous Organic Capsules for Electrochemical Sensing of CuII Ions

A very simple and facile methodology is used to prepare dithiocarbamate-functionalized hollow microporous organic capsules (HMOCs-DTC), which exhibit excellent stability, a high surface area, and appropriate microporous architecture. In this strategy, SiO₂ particles are used as templates to construct PS-DVB-MAA microspheres, and then dithiocarbamate groups are grafted onto them. The dithiocarbamate-functionalized hypercrosslinked microporous organic capsules (HMOCs-DTC/GC) are then used as an electrode material for the detection of Cu^II ions. Cyclic voltammetry (CV) and electron impedance spectroscopy (EIS) are exploited to study the electrochemical potential of the designed material. The placement of functional groups (dithiocarbamate) at the mesopore interface effectively enhances the mass transfer, which facilitates the more selective detection of Cu^II ions. The high sensitivity of the modified electrode is expressed in terms of current (I_p ) enhancement at extremely low concentrations of Cu^II ions. Thus, a functional and robust porous material (HMOCs-DTC) presents a sensitive sensing ability, displaying the calibration response over a wide linear range (2.50×10^-11 -3.50×10^-10  m), with a lowest limit of detection of 1.02×10^-11  m. Indeed, these HMOCs present a new class of porous polymers possessing extraordinarily high scalability but avoiding complex and expensive synthetic methodologies, promoting its practical utilization.

Determination of subnanomolar levels of mercury (II) by using a graphite paste electrode modified with MWCNTs and Hg(II)-imprinted polymer nanoparticles

Mercury ion-imprinted polymer nanoparticles (Hg-IP-NPs) were synthesized via precipitation polymerization by using itaconic acid as a functional monomer. A carbon paste electrode was impregnated with the synthesized Hg-IP-NPs and MWCNTs to obtain a highly sensitive and selective electrode for determination of Hg(II). Mercury ion is first accumulated on the electrode surface via an open circuit procedure. After reduction of Hg(II) ions to its metallic form at a negative pre-potential, square wave anodic stripping voltammetry was applied to generate the electrochemical signal. The high affinity of the Hg-IP-NPs for Hg(II) was substantiated by comparing of the signals of electrodes with imprinted and non-imprinted polymer. The beneficial effect of MWCNTs on the voltammetric signal is also demonstrated. Under the optimized conditions and at a typical working potential of +0.05 V (vs. Ag/AgCl), the electrode has a linear response in the 0.1-20 nmol L^-1 Hg(II) concentration range and a 29 pM detection limit. The electrochemical sensitivity is as high as 1441 A·M^-1·cm^-2 which is among the best values known. The electrode was applied to the determination of Hg(II) in water samples. Graphical abstract Schematic representation of the sensor electrode modified with mercury-imprinted polymer nanoparticles, and the recognition and voltammetric determination steps.

Complexation-Based Detection of Nickel(II) at a Graphene-Chelate Probe in the Presence of Cobalt and Zinc by Adsorptive Stripping Voltammetry

The adsorptive stripping voltammetric detection of nickel and cobalt in water samples at metal film electrodes has been extensively studied. In this work, a novel, environmentally friendly, metal-free electrochemical probe was constructed for the ultra-trace determination of Ni2+ in water samples by Adsorptive Cathodic Stripping Voltammetry (AdCSV). The electrochemical platform is based on the adsorptive accumulation of Ni2+ ions directly onto a glassy carbon electrode (GCE) modified with dimethylglyoxime (DMG) as chelating agent and a Nafion-graphene (NGr) nanocomposite to enhance electrode sensitivity. The nafion-graphene dimethylglyoxime modified glassy carbon electrode (NGr-DMG-GCE) shows superior detection capabilities as a result of the improved surface-area-to-volume ratio and enhanced electron transfer kinetics following the incorporation of single layer graphene, while limiting the toxic effects of the sensor by removal of the more common mercury, bismuth and lead films. Furthermore, for the first time the NGr-DMG-GCE, in the presence of common interfering metal ions of Co2+ and Zn2+ demonstrates good selectivity and preferential binding towards the detection of Ni2+ in water samples. Structural and morphological characterisation of the synthesised single layer graphene sheets was conducted by Raman spectrometry, HRTEM and HRSEM analysis. The instrumental parameters associated with the electrochemical response, including accumulation potential and accumulation time were investigated and optimised in addition to the influence of DMG and graphene concentrations. The NGr-DMG-GCE demonstrated well resolved, reproducible peaks, with RSD (%) below 5% and a detection limit of 1.5 µg L-1 for Ni2+ reduction at an accumulation time of 120 s., the prepared electrochemical sensor exhibited good detection and quantitation towards Ni2+ detection in tap water samples, well below 0.1 mg L-1 set by the WHO and EPA standards. This comparable to the South African drinking water guidelines of 0.15 mg L-1.