Glutaraldehyde-induced remineralization improves the mechanical properties and biostability of dentin collagen

Promotion effect of proanthocyanidin on dentin remineralization via the polymer induced liquid precursor process

Proanthocyanidin (PA) has demonstrated promise as a dental biomodifier for maintaining dentin collagen integrity, yet there is limited evidence regarding its efficacy in dentin repair. The aim of this study was to investigate the effect of PA on dentin remineralization through the polymer induced liquid precursor (PILP) process, as well as to assess the mechanical properties of the restored dentin. Demineralized dentin was treated with a PA-contained remineralization medium, resulting in the formation of PA-amorphous calcium phosphate (ACP) nanoparticles via the PILP process. The kinetics and microstructure of remineralized dentin were examined through the use of Fourier transform infrared spectroscopy(FTIR), attenuated total reflectance-FTIR, scanning electron microscopy, transmission electron microscopy. The results showed that the application of PA facilitated the process of dentin remineralization, achieving completion within 48 h, demonstrating a notable reduction in time required. Following remineralization, the mechanical properties of the dentin exhibited an elastic modulus of 15.89 ± 1.70 GPa and a hardness of 0.47 ± 0.08 GPa, which were similar to those of natural dentin. These findings suggest that combining PA with the PILP process can promote dentin remineralization and improve its mechanical properties, offering a promising new approach for dentin repair in clinical practice.

Assessing the impact of different Urushiol primer solvents on dentin remineralization and bond strength

OBJECTIVES

To investigate urushiol's potential as a dentin cross-linking agent, promoting remineralization of etched dentin and preventing activation of endogenous proteases causing collagen degradation within the hybrid layer. The goal is to improve bond strength and durability at the resin-dentin interface.

METHODS

Urushiol primers with varying concentrations were prepared using ethanol and dimethyl sulfoxide (DMSO) as solvents. Dentin from healthy molars underwent grinding and acid etching for 15 s, followed by a 1min application of urushiol primer. After 14 and 28 days of remineralization incubation and remineralization were used to assess by Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR-FTIR), Micro-Raman spectroscopy, X-ray Diffraction (XRD), Atomic Force Microscopy (AFM), Vickers Hardness, Scanning Electron Microscopy (SEM), and Energy X-ray dispersive spectroscopy (EDS). The overall performance of urushiol primers as dentin adhesives was observed by microtensile bond strength (μTBS) testing and nanoleakage assessment. Investigated the inhibitory properties of the urushiol primers on endogenous metalloproteinases (MMPs) utilizing in situ zymography, and the cytotoxicity of the primers was tested.

RESULTS

Based on ATR-FTIR, Raman, XRD, EM-EDS and Vickers hardness analyses, the 0.7%-Ethanol group significantly enhanced dentin mineral content and improved mechanical properties the most. Pretreatment notably increased the μTBS of restorations, promoted the stability of the mixed layer, and reduced nanoleakage and MMPs activity after 28 days.

SIGNIFICANCE

The urushiol primer facilitates remineralization in demineralized dentin, enhancing remineralization in etched dentin, effectively improving the bonding interface stability, with optimal performance observed at a 0.7 wt% concentration of the urushiol primer.

Application of a calcium and phosphorus biomineralization strategy in tooth repair: a systematic review

Biomineralization is a natural process in which organisms regulate the growth of inorganic minerals to form biominerals with unique layered structures, such as bones and teeth, primarily composed of calcium and phosphorus. Tooth decay significantly impacts our daily lives, and the key to tooth regeneration lies in restoring teeth through biomimetic approaches, utilizing mineralization strategies or materials that mimic natural processes. This review delves into the types, properties, and transformations of calcium and phosphorus minerals, followed by an exploration of the mechanisms behind physiological and pathological mineralization in living organisms. It summarizes the mechanisms and commonalities of biomineralization and discusses the advancements in dental biomineralization research, guided by insights into calcium and phosphorus mineral biomineralization. This review concludes by addressing the current challenges and future directions in the field of dental biomimetic mineralization.

Chemical analysis of n-propyl gallate used as pre-treatment for resin-dentin bond strength: In vitro study

This study aimed to evaluate the effect of n-propyl gallate as pre-treatment for resin-dentin bond strength. The dentin pre-treatments evaluated included propyl gallate of concentrations 0.1% (w/v), 1.0% (w/v), and 10.0% (w/v), as well as glutaraldehyde 5.0% (v/v), and distilled water as a control treatment. Dentin specimens were prepared for Fourier Transformed Infrared Spectroscopy (FT-IR) (n = 3/pre-treatment). Pre-treatments were actively applied to dentin blocks before performing the adhesive procedure to composite resin. Microtensile bond strength to dentin (μTBS) (n = 8/pre-treatment) was determined after 24 h and 6 months of storage. Data were submitted to a two-way ANOVA, followed by Tukey's post hoc test. As for FT-IR, propyl gallate 1%-treated specimens presented higher water, carbonate, collagen, and amide absorbance rates compared to other tested groups, while specimens pre-treated with glutaraldehyde and distilled water presented similar absorbance curves. Regarding μTBS, all concentrations of propyl gallate resulted in statistically significant higher bond strength values than distilled water at 24 h. After 6 months of storage, propyl gallate 0.1% was the only group that maintained μTBS over time. Propyl gallate 0.1% might be a suitable dentinal pre-treatment due to being able to present chemical bonds with demineralized dentin and providing resin-dentin bond stability after 6 months of storage.

Tissue Stabilization, Bacterial Adhesion, and Stem Cell Viability in Trans-cinnamaldehyde-conditioned Dentin

INTRODUCTION

This laboratory study aimed to evaluate the effect of trans-cinnamaldehyde (TC) conditioning on dentin tissue stabilization, bacterial adhesion, and stem cell toxicity.

METHODS

Dentin beams (n = 204) from extracted human molars were demineralized in phosphoric acid and treated with TC (2.5, 5, and 7.5%), 50% ethanol-water mixture (vehicle control) or 2.5% glutaraldehyde (GA) (positive control) for 30 minutes. Demineralized but untreated specimens served as the negative control. After treatment, collagen crosslinking was characterized by measuring the elastic modulus (Er) and hardness (n = 5). Biodegradation resistance was examined by determining the loss of dry mass (n = 8), hydroxyproline release (n = 4) and scanning electron microscopy (n = 2), after exposure to bacterial collagenase. Inhibition of bacterial adhesion was investigated by colony counting assay (n = 12) and scanning electron microscopy (n = 2). Viability of stem cells of the apical papilla on TC-conditioned dentin was determined using the Cell Counting Kit-8 assay (n = 8). Data were statistically analyzed using one-way analysis of variance (ANOVA) test followed by Dunnett's multiple comparisons at a significance level of 5%.

RESULTS

TC-conditioned dentin showed a concentration-dependent increase in Er and hardness. The Er and hardness of 5% and 7.5% TC-conditioned dentin were significantly greater than that of the negative control and vehicle control groups (P < .05). There was no significant difference in the biodegradation resistance between GA and 5% TC-conditioned dentin (P > .05). TC-conditioned dentin showed a well-preserved collagen fibril network with clear cross-banding, comparable to GA-conditioned dentin. All concentrations of TC inhibited bacterial adhesion on dentin, significantly greater than the negative control (P < .05). There was no reduction in viability of stem cells of the apical papilla viability on TC-conditioned dentin compared to the negative control (P > .05).

CONCLUSIONS

TC conditioning stabilized the dentin and protected it from enzymatic degradation. TC prevented bacterial adhesion on the dentin but maintained stem cell viability.

Processing and post-processing of fish skin as a novel material in tissue engineering

As a natural material, fish skin contains significant amounts of collagen I and III, and due to its biocompatible nature, it can be used to regenerate various tissues and organs. To use fish skin, it is necessary to perform the decellularization process to avoid the immunological response of the host body. In the process of decellularization, it is crucial to conserve the extracellular matrix (ECM) three-dimensional (3D) structure. However, it is known that decellularization methods may also damage ECM strands arrangement and structure. Moreover, after decellularization, the post-processing of fish skin improves its mechanical and biological properties and preserves its 3D design and strength. Also, sterilization, which is one of the post-processing steps, is mandatory in pre-clinical and clinical settings. In this review paper, the fish skin decellularization methods performed and the various post-processes used to increase the performance of the skin have been studied. Moreover, multiple applications of acellular fish skin (AFS) and its extracted collagen have been reviewed.

NDGA enhances the physicochemical and anti-biodegradation performance of dentin collagen

OBJECTIVES

Collagen fibrils from carious dentin matrix are prone to enzymatic degradation. This study investigates the feasibility and mechanism of nordihydroguaiaretic acid (NDGA), as a collagen crosslinker, to bio-modify the demineralized dentin matrix.

METHODS

The physicochemical properties of the crosslinked dentin matrix were characterized by swelling ratio, ninhydrin assay, Fourier Transform Infrared spectroscopy, and atomic force microscopy. The collagenase degradation resistance was evaluated by measuring loss of dry mass, hydroproline release, loss of elasticity, and micro-nano structure integrity. The cytotoxicity of NDGA-crosslinked dentin collagen was evaluated by flow cytometry.

RESULTS

NDGA crosslinked dentin matrix without destroying the integrity of collagen. Mechanistically, NDGA formed bisquinone bond between two adjacent o-quinone groups, resulting in NDGA polymeric matrix in which collagen fibrils were embedded. NDGA modification could significantly enhance the stiffness of dentin matrix at macro-nano scale. The NDGA-crosslinked dentin matrix exhibited remarkably low collagen degradation and sustained bulk elasticity after collagenase challenge, which were attributed to decreased water content, physical masking of collagenase bind sites on collagen, and improved stiffness of collagen fibrils. Notably, NDGA-crosslinked dentin matrix exhibited excellent biocompatibility.

CONCLUSION

NDGA, as a biocompatible collagen crosslinker, improves the mechanical properties and biodegradation resistance of demineralized dentin matrix.

Glutaraldehyde-based desensitizers' influence on bonding performances and dentin enzymatic activity of universal adhesives

OBJECTIVES

To evaluate the influence of two glutaraldehyde-based desensitizers (L: GLUMA Desensitizer, Heraeus Kulzer and G: GLUMA Desensitizer PowerGel) prior to the adhesive procedures on microtensile bond strength (µTBS) to dentin and endogenous enzymatic activity.

METHODS

Noncarious human third molars (N = 48) were cut to expose middle coronal dentin. Six experimental groups were formed according to the dentin pre-treatment (L or G) and the universal adhesives (IBU - iBond universal, Kulzer or AU - Adhese Universal, Ivoclar Vivadent) used in the self-etch mode (n = 8): 1) L/IBU; 2) G/IBU; 3) IBU; 4) L/AU; 5) G/AU; 6) AU. Specimens were cut into sticks and stressed until failure after 24 h (T0) or 1 yr of aging (T12). Additional 4 teeth were used for in situ zymography evaluation and data were statistically analyzed (α = 0.05).

RESULTS

Dentin pre-treatment, adhesive and aging statistically influenced bond strength and enzymatic activity (P<0.001). AU demonstrated higher bond strength values than IBU (P<0.001). The L resulted in higher bond strength compared to the G and control groups (P<0.001). aging statistically influenced bonding performance, especially when no dentin pre-treatment was performed (P<0.001). In situ zymography revealed that at baseline the control groups exhibited lower interfacial fluorescence compared to the experimental groups, irrespective of the adhesive used (P<0,001). However, after 1 yr of artificial storage, no differences were found among the groups (P>0.05).

CONCLUSIONS

Glutharldeadeyde-based products increased bond strength and determined a stabilization of the adhesive interface over time apparently not related to the MMPs inhibition.

CLINICAL SIGNIFICANCE

The results of this in vitro study suggest that the application of glutaraldehyde-based desensitizers prior to the adhesive procedures when associated with universal adhesives could result in increased bond strength and stabilization of the adhesive interface over time.

Crosslinking Improve Demineralized Dentin Performance and Synergistically Promote Biomimetic Mineralization by CaP_PILP

OBJECTIVE

to explore the effects of optimal crosslinking (chemical treatment) on demineralized dentin matrix and the possible synergism with calcium phosphate polymer-induced liquid precursor (CaP-PILP) bionic remineralization (physical treatment), and offer benefit to the clinic of resin-dentin bonding and dentin hypersensitivity.

METHODS

demineralized dentin was treated with glutaraldehyde (GA), carbodiimide (EDC), and procyanidin (PA) for crosslinking, followed by CaP-PILP biomimetic remineralization. The morphology, surface mechanical and physio-chemical properties, and enzymatic resistance were evaluated regardless of the modification.

RESULTS

the collagen fibers appeared morphologically complete with higher surface microhardness and characteristic peaks of amide I-III bands were visible after GA, PA, and EDC crosslinking. Collagen collapse and dissolution were seen in untreated demineralized dentin with enzyme attack, while the collagen fiber structure remained intact in GA- and PA-treated specimens. The lamellar mineral phase was visible at 2 days and the dentin tubules were almost completely enclosed at 4-6 days after PA crosslinking and mineralization. However, demineralized collagen fibers and open tubules were still visible between the dentinal tubules on day 8 in the control group.

CONCLUSION

the structure integrity, enzyme resistance, and mechanical properties of the collagen fiber network could be significantly preserved by GA and PA crosslinking than EDC and no treatment. While, strongest synergistic effects were observed in PA on bionic remineralization by CaP-PILP, and further significantly improve the quality and shorten the duration of mineralization. These findings would be beneficial for dental clinical practice of resin-dentin bonding and dentin hypersensitivity.

Polyphenols Can Improve Resin-Dentin Bond Durability by Promoting Amorphous Calcium Phosphate Nanoparticles to Backfill the Dentin Matrix

Objective

To investigate the effects of proanthocyanidins (PA), myricetin, resveratrol, and kaempferol on the modification of dentin collagen and the inhibition of matrix metalloproteinase (MMP) activity, and to evaluate their contributions to the biomimetic remineralization and resin-dentin bonding performance.

Methods

Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and in situ zymography were applied to verify the collagen modification and MMP activity inhibition induced by these four polyphenols. Scanning electron microscopy/energy dispersive spectrometer (SEM/EDS) analysis, X-ray diffraction (XRD), ATR-FTIR, Vickers hardness numbers (VHN), and micro-computed tomography (micro-CT) were performed to characterize the remineralized dentin. Microtensile bond strength (μTBS) and nanoleakage were investigated to evaluate the effects of the four polyphenols on resin-dentin bonding durability.

Results

ATR-FTIR and in situ zymography confirmed that these four polyphenols could modify dentin collagen and inhibit MMP activity, respectively. Chemoanalytic characterization exhibited the efficacies of the four polyphenols in promoting dentin biomimetic remineralization. The surface hardness of PA-pretreated dentin was the greatest. Micro-CT results demonstrated that the PAs group possessed the highest amount of dentin surface minerals and the lowest amount of deep-layer minerals. The surface and deep-layer mineral contents of the Myr group were higher than Res and Kae groups. Treatment with these four polyphenols significantly increased the initial μTBS compared with the control group without primer conditioning. μTBS decreased significantly during aging, and the decrease was more severe in the PAs and Kae groups than in the Myr and Res groups. With or without aging, the polyphenol groups exhibited relatively less fluorescence. However, the Myr and Res groups showed less serious nanoleakage after aging.

Conclusion

PA, myricetin, resveratrol, and kaempferol can modify dentin collagen, inhibit MMP activity, promote biomimetic remineralization, and improve resin-dentin bond durability. Compared with PA and kaempferol, myricetin and resveratrol are more effective in improving resin-dentin bonding.

Synergistic effect of collagen cross-linking and remineralization for improving resin-dentin bond durability

In this study, the synergistic effect of glutaraldehyde-cross-linking and remineralization on the strength and durability of resin-dentin bonds was investigated. Dentin surfaces were etched with 35% phosphoric acid. The control specimens were bonded with Adper Single Bond 2 using wet bonding without pretreatment. The experimental specimens were pretreated with 5% (v/v) glutaraldehyde solution for 3 min and placed in a remineralizing solution for 0, 12, and 24 h, followed by dry bonding. After performing composite build-ups on the specimens, they were longitudinally sectioned, immediately, and after aging for 3 h with sodium hypochlorite (NaOCl), to evaluate microtensile bond strength (µTBS). The cross-linked specimens exhibited µTBS values comparable with those of the control group, but the µTBS decreased significantly after NaOCl aging. The cross-linked dentin remineralized for 24 h exhibited an increase in µTBS. After aging in NaOCl, the µTBS of the specimens remineralized for 24 h did not decrease and was significantly higher than for the other experimental groups. Cross-linking with dry bonding maintained µTBS in specimens before aging in NaOCl, but the bonding durability was compromised. Remineralization of cross-linked dentin for 24 h followed by dry bonding increased the immediate µTBS and improved bond durability. Therefore, combining cross-linking with remineralization of collagen fibrils progressively increased resistance to degradation, improving bond durability.

Chemical modification of acellular fish skin as a promising biological scaffold by carbodiimide cross‐linker for wound healing

Biological matrices can be modified with cross-linkers to improve some of their characteristics as scaffolds for tissue engineering. In this study, chemical cross-linker 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) was used with different ratios (5, 10, 20, 30, and 40 mM) to improve properties such as mechanical strength, denaturation temperature, and degradability of the acellular fish skin as a biological scaffold for tissue engineering applications. Morphological analysis showed that the use of cross-linker at low concentrations had no effect on the structure and textiles of the scaffold, while increasing mechanical strength, denaturation temperature, and degradation time. Cytotoxicity and cellular studies showed that the optimal cross-linker concentration did not significantly affect cell viability as well as cell adhesion. In general, utilising the carbodiimide cross-linker with the optimal ratio can improve the characteristics and function of the biological tissues such as acellular fish skin.

A Dentin Biomimetic Remineralization Material with an Ability to Stabilize Collagen

The integrity of collagen matrix structure is a prerequisite for effectively inducing biomimetic remineralization. Repeated low pH stimulation activates matrix metalloproteinases (MMPs) in dental caries. Activated MMPs cause the breakdown of collagen fibrils. Collagen stabilization is a major obstacle to the clinical application of remineralization templates. Here, galardin-loaded poly(amido amine) (PAMAM)-NGV (PAMAM-NGV@galardin, PNG) is constructed to induce collagen stabilization and dentin biomimetic remineralization simultaneously, in order to combat early caries in dentin. PAMAM acts in the role of nucleation template for dentin remineralization, while galardin acts as the role of MMPs inhibitor. NGV peptides modified on the surface of dendrimer core can form small clusters with synergistic movement in short range, and those short-range clusters can form domain areas with different properties on the surface of PAMAM core and restrict the movement of collagen, favoring collagen crosslinking, which can be explained through the computational simulation analysis results. NGV peptides and galardin show a dual collagen-protective effect, laying the foundation for the dentin remineralization effect induced by PAMAM. PNG induces dentin remineralization in an environment with collagenase, meanwhile showsing anti-dentin caries efficacy in vivo. These findings indicate that PNG has great potential to combat early dentin caries for future clinical application.

Effect of Collagen Crosslinkers on Dentin Bond Strength of Adhesive Systems: A Systematic Review and Meta-Analysis

This study aimed to identify the role of crosslinking agents in the resin–dentin bond strength (BS) when used as modifiers in adhesives or pretreatments to the dentin surface through a systematic review and meta-analysis. This paper was conducted according to the directions of the PRISMA 2020 statement. The research question of this review was: “Would the use of crosslinkers agents improve the BS of resin-based materials to dentin?” The literature search was conducted in the following databases: Embase, PubMed, Scielo, Scopus, and Web of Science. Manuscripts that reported the effect on the BS after the use of crosslinking agents were included. The meta-analyses were performed using Review Manager v5.4.1. The comparisons were performed by comparing the standardized mean difference between the BS values obtained using the crosslinker agent or the control group. The subgroup comparisons were performed based on the adhesive strategy used (total-etch or self-etch). The immediate and long-term data were analyzed separately. A total of 50 articles were included in the qualitative analysis, while 45 articles were considered for the quantitative analysis. The meta-analysis suggested that pretreatment with epigallocatechin-3-gallate (EGCG), carbodiimide, ethylenediaminetetraacetic acid (EDTA), glutaraldehyde, and riboflavin crosslinking agents improved the long-term BS of resin composites to dentin (p ≤ 0.02). On the other hand, the use of proanthocyanidins as a pretreatment improved both the immediate and long-term BS values (p ≤ 0.02). When incorporated within the adhesive formulation, only glutaraldehyde, riboflavin, and EGCG improved the long-term BS to dentin. It could be concluded that the application of different crosslinking agents such as carbodiimide, EDTA, glutaraldehyde, riboflavin, and EGCG improved the long-term BS of adhesive systems to dentin. This effect was observed when these crosslinkers were used as a separate step and when incorporated within the formulation of the adhesive system.

Degradation and Stabilization of Resin-Dentine Interfaces in Polymeric Dental Adhesives: An Updated Review

Instability of the dentine-resin interface is owed to the partial/incomplete penetration of the resin adhesives in the collagen fibrils. However, interfacial hydrolysis of the resin-matrix hybrid layer complex activates the collagenolytic and esterase enzymes that cause the degradation of the hybrid layer. Adequate hybridization is often prevented due to the water trapped between the interfibrillar spaces of the collagen network. Cyclic fatigue rupture and denaturation of the exposed collagen fibrils have been observed on repeated application of masticatory forces. To prevent interfacial microstructure, various approaches have been explored. Techniques that stabilize the resin–dentine bond have utilized endogenous proteases inhibitors, cross linking agents’ incorporation in the exposed collagen fibrils, an adhesive system free of water, and methods to increase the monomer penetration into the adhesives interface. Therefore, it is important to discover and analyze the causes of interfacial degradation and discover methods to stabilize the hybrid layer to execute new technique and materials. To achieve a predictable and durable adhesive resin, restoration is a solution to the many clinical problems arising due to microleakage, loss of integrity of the restoration, secondary caries, and postoperative sensitivity. To enhance the longevity of the resin-dentine bond strength, several experimental strategies have been carried out to improve the resistance to enzymatic degradation by inhibiting intrinsic collagenolytic activity. In addition, biomimetic remineralization research has advanced considerably to contemporary approaches of both intrafibrillar and extrafibrillar remineralization of dental hard tissues. Thus, in the presence of biomimetic analog complete remineralization of collagen, fibers are identified.

Advances in biomineralization-inspired materials for hard tissue repair

Biomineralization is the process by which organisms form mineralized tissues with hierarchical structures and excellent properties, including the bones and teeth in vertebrates. The underlying mechanisms and pathways of biomineralization provide inspiration for designing and constructing materials to repair hard tissues. In particular, the formation processes of minerals can be partly replicated by utilizing bioinspired artificial materials to mimic the functions of biomolecules or stabilize intermediate mineral phases involved in biomineralization. Here, we review recent advances in biomineralization-inspired materials developed for hard tissue repair. Biomineralization-inspired materials are categorized into different types based on their specific applications, which include bone repair, dentin remineralization, and enamel remineralization. Finally, the advantages and limitations of these materials are summarized, and several perspectives on future directions are discussed.

Progress on Biomimetic Mineralization and Materials for Hard Tissue Regeneration

Biomineralization is a process in which natural organisms regulate the crystal growth of inorganic minerals, resulting in hierarchical structured biominerals with excellent properties. Typical biominerals in the human body are the bones and teeth, and damage to these hard tissues directly affect our daily lives. The repair of bones and teeth in a biomimetic way, either by using a biomimetic mineralization strategy or biomimetic materials, is the key for hard tissue regeneration. In this review, we briefly introduce the structure of bone and tooth, and highlight the fundamental role of collagen mineralization in tissue repair. The recent progress on intra-/extrafibrillar collagen mineralization by a biomimetic strategy or materials is presented, and their potential for tissue regeneration is discussed. Then, recent achievements on bone and tooth repair are summarized, and these works are discussed in the view of materials science and biological science, providing a broader vision for the future research of hard tissue repair techniques. Lastly, recent progress on hard tissue regeneration is concluded, and existing problems and future directions are prospected.

Mineralization of Phosphorylated Fish Skin Collagen/Mangosteen Scaffolds as Potential Materials for Bone Tissue Regeneration

In this study, a potential hard tissue substitute was mimicked using collagen/mangosteen porous scaffolds. Collagen was extracted from Tilapia fish skin and mangosteen from the waste peel of the respective fruit. Sodium trimetaphosphate was used for the phosphorylation of these scaffolds to improve the nucleation sites for the mineralization process. Phosphate groups were incorporated in the collagen structure as confirmed by their attenuated total reflection Fourier transform infrared (ATR-FTIR) bands. The phosphorylation and mangosteen addition increased the thermal stability of the collagen triple helix structure, as demonstrated by differential scanning calorimetry (DSC) and thermogravimetry (TGA) characterizations. Mineralization was successfully achieved, and the presence of calcium phosphate was visualized by scanning electron microscopy (SEM). Nevertheless, the porous structure was maintained, which is an essential characteristic for the desired application. The deposited mineral was amorphous calcium phosphate, as confirmed by energy dispersive X-ray spectroscopy (EDX) results.

Cross-linking effects of carbodiimide, oxidized chitosan oligosaccharide and glutaraldehyde on acellular dermal matrix of basa fish (Pangasius bocourti)

Basa acellular dermal matrix (BADM) has advantages in the preparation of oral prosthetic membranes. In order to prepare high-quality BADM, a suitable cross-linking agent is necessary. In this study, acellular dermal matrix was prepared from basa fish skin and then cross-linked with carbodiimide (EDC), oxidized chitosan oligosaccharide (OCOS) and glutaraldehyde (GA), respectively. Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction analysis (XRD), histological staining, DNA electrophoresis and the limulus amoebocyte lysate chromogenic assay were used to detect the structure and properties of BADM. The compatibility of BADM was detected by implantation in vivo and cell experiments. The results showed that the majority of the cellular and DNA in BADM were removed. The endotoxin was not be detected. Furthermore, the structure of BADM was not destroyed. The mechanical and anti-degraded properties of BADM were promoted obviously after cross-linking. The thermal shrinkage temperatures of wet and dry EDC-BADM (BADM cross-linked by carbodiimide) were increased by 39.22 °C and 18.27 °C, respectively, compared with that of the uncross-linked BADM. In addition, the EDC-BADM had good biocompatibility and cytocompatibility. In conclusion, carbodiimide can improve the properties of BADM, which has potential application in the field of biomaterials.

Polydopamine Promotes Dentin Remineralization via Interfacial Control

Biomineralization has intrigued researchers for decades. Although mineralization of type I collagen has been universally investigated, this process remains a great challenge due to the lack of mechanistic understanding of the roles of biomolecules. In our study, dentine was successfully repaired using the biomolecule polydopamine (PDA), and the remineralized dentine exhibited mechanical properties comparable to those of natural dentine. Detailed analyses of the collagen mineralization process facilitated by PDA showed that PDA can promote intrafibrillar mineralization with a decreased heterogeneous nucleation barrier for hydroxyapatite (HAP) by reducing the interfacial energy between collagen fibrils and amorphous calcium phosphate (ACP), resulting in the conversion of an increasing amount of nanoprecursors into collagen fibrils. The present work highlights the importance of interfacial control in dentine remineralization and provides profound insight into the regulatory effect of biomolecules in collagen mineralization as well as the clinical application of dentine restoration.

Effect of tea root-derived proanthocyanidin fractions on protection of dentin collagen

Objectives

Proanthocyanidins (PAs) have been widely used as effective agents for dentin collagen cross-linking to enhance the biomechanics and biostability of dentin in vitro. However, the effects and protective mechanisms of various tea root-derived PA components on dentin remain undefined. This study evaluated the effects of these tea root-derived PA components on dentin biomechanics and biostability.

Methods

In this study, ethyl acetate and n-butyl alcohol were used to extract PAs with different degrees of polymerization from tea roots; the effects of these PA extracts on dentin were evaluated.

Results

Dentin was treated with glutaraldehyde, ethyl acetate, n-butyl alcohol, or water. PAs with a high degree of polymerization, extracted using n-butyl alcohol, were able to more effectively improve dentin collagen cross-linking, increase resistance to bacterial collagenase digestion, and enhance dentin elasticity, relative to treatment with glutaraldehyde or PAs with a low degree of polymerization (extracted using ethyl acetate). Additionally, treatment with aqueous extract of tea roots was detrimental to dentin stability and function.

Conclusions

PAs with a high degree of polymerization were effective for dentin protection and restoration in vitro, suggesting clinical treatment potential for tea root-derived PAs.

The Significance and Utilisation of Biomimetic and Bioinspired Strategies in the Field of Biomedical Material Engineering: The Case of Calcium Phosphat-Protein Template Constructs

This review provides a summary of recent research on biomimetic and bioinspired strategies applied in the field of biomedical material engineering and focusing particularly on calcium phosphate-protein template constructs inspired by biomineralisation. A description of and discussion on the biomineralisation process is followed by a general summary of the application of the biomimetic and bioinspired strategies in the fields of biomedical material engineering and regenerative medicine. Particular attention is devoted to the description of individual peptides and proteins that serve as templates for the biomimetic mineralisation of calcium phosphate. Moreover, the review also presents a description of smart devices including delivery systems and constructs with specific functions. The paper concludes with a summary of and discussion on potential future developments in this field.

Preparation and Optimization of a Biomimetic Triple-Layered Vascular Scaffold Based on Coaxial Electrospinning

Electrospinning is a promising method for preparing bionic vascular scaffolds. In particular, coaxial electrospinning can encapsulate polymer materials in biological materials and provide vascular scaffolds with good biomechanical properties. However, it is difficult to produce a stable Taylor cone during the coaxial electrospinning process. Moreover, glutaraldehyde cross-linked natural biomaterials are cytotoxic. To address these issues, a novel electrospinning process is proposed in this report. A non-ionic surfactant (Tween 80) was added to poly(lactic-co-glycolic acid) electrospinning solution and gelatin-collagen electrospinning solution, which prevented the interfacial effect of coaxial electrospinning due to different core/shell solutions. The as-prepared materials were then cross-linked with the non-toxic coupling agents N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide/N-hydroxysuccinimide (EDC/NHS). By comparing the biomechanical properties of EDC/NHS cross-linked vascular scaffold with glutaraldehyde vapor-cross-linked vascular scaffold, it was found that the fracture strain and biological performance of EDC/NHS cross-linked vascular scaffold were better than those of the glutaraldehyde cross-linked scaffold. Finally, a three-layer bionic vascular scaffold was prepared by the proposed electrospinning process. Biomechanical performance tests were carried out and the prepared scaffold was found to meet the requirements of tissue-engineered blood vessels. The research in this paper provides a useful reference for the preparation and optimization of vascular scaffolds.

Effect of polyvinylphosphonic acid on resin-dentin bonds and the cytotoxicity of mouse dental papilla cell-23

STATEMENT OF PROBLEM

Polyvinylphosphonic acid (PVPA) could be used as a biomimetic remineralization analog and a matrix metalloproteinases (MMPs) inhibitor. However, studies are lacking regarding the performance of PVPA in dental bonding systems for maintaining the durability of the resin-dentin bond.

PURPOSE

The purpose of this in vitro study was to investigate the effect of PVPA on the durability of resin-dentin bonds and the viability of mouse dental papilla cell-23 (MDPC-23). The mechanical properties of resin-dentin interfaces during long-term storage were analyzed, and the potential application of PVPA as a biomimetic remineralization analog in adhesive dentistry was evaluated.

MATERIAL AND METHODS

Seventy-five extracted noncarious human third molars were collected and randomly divided into 5 groups, and then the microtensile bond strength (μTBS) data and scanning electron microscope (SEM) images were used to evaluate the preservation condition of resin-dentin bonds after 1 day, 6 months, and 1 year of storage. The cytotoxicity of PVPA was detected by cell proliferation assay and cell apoptosis assay.

RESULTS

Compared with the control and chlorhexidine (CHX) groups, the combined group (treated with both 200-μg/mL PVPA and biomimetic remineralization) had excellent bond durability. The exposed collagen fibril from the PVPA-treated groups (included 200-μg/mL and 500-μg/mL PVPA groups and a combined group) still showed integrity after 1 year of storage when compared with the control group. PVPA up to 500 μg/mL showed no cytotoxicity to MDPC-23 and did not inhibit cell growth.

CONCLUSIONS

This study offered evidence that PVPA did not result in cytotoxicity at low concentrations as an MMP inhibitor and a biomimetic remineralization analog. In addition, the application of PVPA improved bond strength and preserved collagen integrity after 1 year of in vitro storage.

Phosphorylated chitosan to promote biomimetic mineralization of type I collagen as a strategy for dentin repair and bone tissue engineering

This novel biomimetic mineralization technique provides an efficient method to produce an advanced mineralized matrix.

Effects of Collagen Crosslinkers on Dentine: A Literature Review

This aim of this review is to explore the current research related to crosslinking agents used on dentine. A systematic search of publications in PubMed and Web of Science databases was performed. Further retrieval was conducted using the search terms of specific names of crosslinkers. Reviews, conference abstracts, dissertation and theses, non-English articles, studies of intrinsic crosslinking of dentine, studies of adhesives without specific crosslinker components, studies of crosslinker applications in other collagenous tissues or tooth-like structures and irrelevant studies were excluded. Manual screening was conducted on the bibliographies of remaining papers to identify other relevant articles. One hundred and one articles were included in this systematic review and full texts were retrieved. Both synthetic and naturally derived crosslinkers have been found to exhibit significant effects in biomodification of dentine via their multiple interactions with the dentine matrix. A stable matrix network or a durable hybrid layer in dentine bonding could be achieved, where the dentine collagen fibrils show improved biochemical and biomechanical properties and enzymatic biodegradation is reduced. Although no crosslinkers have been tested in clinical trials, extensive research has been conducted in laboratory studies to investigate their potential applicability for inhibition of demineralisation and/or promotion of remineralisation, caries prevention as well as improvement of bonding performance of adhesive systems. Further studies are needed to develop the feasibility for clinical use, reduce side effects as well as explore mechanisms of action and long-term effectiveness.

Remineralization Potential of Mints Containing Bioactive Agents in Artificially Induced Root Caries

This study investigated the remineralization effect of experimental mint formulations containing bioactive agents (xylitol; green tea extract, GT; and amorphous calcium phosphate, ACP) in the progression of artificially induced root caries. Root caries lesions were induced by demineralization solution (pH 4.6; 96 h; 37°C). The lesions were treated with mint A, mint B, mint C, xylitol, GT, ACP, or remineralization solution (RS; negative control). Specimens were pH-cycled through treatments (5×/day; 3 min) and 6 cycles of acidic (pH 5.0; 30 min) and neutral (pH 7.0; 10 min) buffers for 8 days. Bacterial collagenase (Clostridium histolyticum) was used overnight to simulate proteolytic challenge. Caries depth and porosity as well as mineral density were estimated using fluorescence microscopy (n = 15) and microcomputed tomography (n = 6). Analysis of variance (ANOVA, α = 0.05) showed no statistically significant difference in caries depth among all groups (p = 0.172). The highest fluorescence intensity decrease was observed for GT followed by mint C, with no significant difference between them (p = 0.868). There were significant differences among GT and mints A, B, and C when compared to RS (p < 0.001). No statistically significant differences in fluorescence intensity were observed among ACP, xylitol, and RS (p > 0.05). The mineral density of the lesions in GT, mints A, B, and C, and ACP was statistically similar (p > 0.05) and significantly higher than that in RS (p < 0.05). No significant difference was observed between xylitol and RS (p = 0.728). The experimental mints showed remineralization action on artificial root caries, and GT was found to be the main active ingredient in the investigated formulations.

Self-Etch Adhesive as a Carrier for ACP Nanoprecursors to Deliver Biomimetic Remineralization

Lab biomineralization should be carried out in an actual clinical practice. This study evaluated self-etch adhesive as a carrier for amorphous calcium phosphate (ACP) nanoprecursors to continuously deliver biomimetic remineralization of self-assembly type I collagen and demineralized dentin. Si-containing ACP particles (Si-ACP) stabilized with polyaspartic acid (PAsp) were synthesized and characterized by transmission electron microscopy (TEM), scanning electron microscopy-energy-dispersive X-ray spectroscopy, Fourier transform infrared analysis, X-ray powder diffractometry, and X-ray phototelectron spectroscopy. The biomimetic remineralization of single-layer reconstituted type I collagen fibrils and demineralized dentin was analyzed by using two one-bottle self-etch dentin adhesives (Clearfil S3 Bond (S3), Kurraray-Noritake; Adper Easy One (AEO), 3 M ESPE) as a carrier loaded (or not, in the case of the control) with 25 wt % of Si-ACP particles. In vitro cytotoxicity assessed by the Cell Counting Kit-8 indicated that the Si-ACP particles had no adverse effect on cell viability. The capacity for Ca and P ions release from cured Si-ACP-containing adhesives (S3, AEO) was evaluated by inductively coupled plasma-atomic emission spectrometry, revealing the successively increasing release of Ca and P ions for 28 days. The intra- and extrafibrillar remineralization of type I collagen and demineralized dentin was confirmed by TEM and selected-area electron diffraction when the adhesives were used as a carrier loaded with Si-ACP particles. Therefore, we propose self-etch adhesive as a novel carrier for ACP nanoprecursors to continuously deliver biomimetic remineralization.

A poly(2-hydroxyethyl methacrylate)-based resin improves the dentin remineralizing ability of calcium silicates

Bioactive polymeric composites have received great attention for their capability to remineralize the dentin tissue. This study was aimed at evaluating if a poly(HEMA-co-TEGDMA) resin (HEMA: 2-hydroxyethyl methacrylate; TEGDMA: triethyleneglycol dimethacrylate) may increase the in vitro apatite forming ability of a calcium silicate cement (CaSi), in view of developing a hydrophilic light-curable composite bio-remineralizing restorative material (R-CaSi). To this purpose, the following experiments were carried out: (1) In vitro apatite forming ability of R-CaSi and CaSi was comparatively assessed by micro-Raman spectroscopy after immersion of the cement disks in Dulbecco's Phosphate Buffered Saline (DPBS) at 37°C for 1-28days; (2) Previously demineralized human dentin slices were soaked for 7days in close contact with the CaSi and R-CaSi cements as well as poly(HEMA), poly(TEGDMA) and poly(HEMA-co-TEGDMA), and then were comparatively analyzed by IR spectroscopy. Micro-Raman spectroscopy showed that in calcium phosphate nucleation tests, the B-type carbonated apatite deposit formed on R-CaSi was thicker than that on CaSi; therefore, the poly(HEMA-co-TEGDMA) resin proved able to increase the in vitro apatite forming ability of the calcium silicate-based cement. Both cements were found to induce dentin remineralization, R-CaSi to a higher extent, in agreement with the calcium phosphate nucleation tests. This result may be ascribed to the positive role played by the polymeric component, which was found to interact with collagen and to chelate calcium ions. Upon remineralization, collagen underwent conformational rearrangements and the formed apatite phase, rather than a simple deposit, was intimately bound to the collagen matrix, thanks to the calcium ions chelated by it.

* Collagen Cross-Linking: Biophysical, Biochemical, and Biological Response Analysis

Extracted forms of collagen are subjected to chemical cross-linking to enhance their stability. However, traditional cross-linking approaches are associated with toxicity and inflammation. This work investigates the stabilization capacity, cytotoxicity and inflammatory response of collagen scaffolds cross-linked with glutaraldehyde (GTA), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide, 4-arm polyethylene glycol (PEG) succinimidyl glutarate (4SP), genipin (GEN), and oleuropein. Although all cross-linking methods reduced free amine groups, variable data were obtained with respect to denaturation temperature, resistance to collagenase digestion, and mechanical properties. With respect to biological analysis, fibroblast cultures showed no significant difference between the treatments. Although direct cultures with human-derived leukemic monocyte cells (THP-1) clearly demonstrated the cytotoxic effect of GTA, THP-1 cultures supplemented with conditioned medium from the various groups showed no significant difference between the treatments. With respect to cytokine profile, no significant difference in secretion of proinflammatory (e.g., interleukin [IL]-1β, IL-8, tumor necrosis factor-α) and anti-inflammatory (e.g., vascular endothelial growth factor) cytokines was observed between the noncross-linked and the 4SP and GEN cross-linked groups, suggesting the suitability of these agents as collagen cross-linkers.