Electrospun water-stable zein/ethyl cellulose composite nanofiber and its drug release properties

Development and characterization of active packaging system based on zein nanofibers mat incorporated with geraniol-loaded nanoliposomes

In recent years, development of biopolymeric nanofibers as an active biodegradable packaging system has attracted specific attention. The objective of this research was to develop zein-based electrospun nanofibers (NFs) incorporated with geraniol-loaded nanoliposomes (G-loaded NLPs). Geraniol was encapsulated into NLPs with an efficiency of 79.23%. The particle size and zeta potential of G-loaded NLPs were 121.50 nm and -38.30 mV, respectively. The successful loading of geraniol in the NLPs was approved by Fourier transform infrared (FT-IR) spectroscopy. The liposomal vesicles showed spherical shapes. G-loaded NLPs were added in the zein-based electrospun NFs at three different concentrations (0.25, 0.5, and 1%w/v). All NFs samples exhibited fibrillar structure. The increase of NLPs concentration enhanced the thermal stability of the NFs. However, the crystalline structure of zein NFs did not change by the addition of G-loaded NLPs. The highest surface hydrophobicity was related to the NFs containing 1% G-loaded NLPs. The mechanical parameters of NFs depend on the concentration of NLPs. The NFs incorporated with G-loaded NLPs showed inhibition activity against four foodborne pathogenic bacteria (Staphylococcus aureus, Listeria monocytogenes, Escherichia coli, and Salmonella typhimurium) with an inhibition zone of 4.5-22 mm. Moreover, the α-diphenyl-β-picrylhydrazyl (DPPH) scavenging activity of NFs samples was located at the range of 20%-48%. These findings represent the Efficiency of the G-loaded NLPs for use as bioactive compound in the zein-based NFs as an active packaging material.

A new strategy for the treatment of middle ear infection using ciprofloxacin/amoxicillin-loaded ethyl cellulose/polyhydroxybutyrate nanofibers

A middle ear infection occurs due to the presence of several microorganisms behind the eardrum (tympanic membrane) and is very challenging to treat due to its unique location and requires a well-designed treatment. If not treated properly, the infection can result in severe symptoms and unavoidable side effects. In this study, excellent biocompatible ethyl cellulose (EC) and biodegradable polyhydroxybutyrate (PHB) biopolymer were used to fabricate drug-loaded nanofiber scaffolds using an electrospinning technique to overcome antibiotic overdose and insufficient efficacy of drug release during treatment. PHB polymer was produced from Halomonas sp., and the purity of PHB was found to around be 90 %. Additionally, ciprofloxacin (CIP) and amoxicillin (AMX) are highly preferable since both drugs are highly effective against gram-negative and gram-positive bacteria to treat several infections. Obtained smooth nanofibers were between 116.24 and 171.82 nm in diameter and the addition of PHB polymer and antibiotics improved the morphology of the nanofiber scaffolds. Thermal properties of the nanofiber scaffolds were tested and the highest Tg temperature resulted at 229 °C. The mechanical properties of the scaffolds were tested, and the highest tensile strength resulted in 4.65 ± 6.33 MPa. Also, drug-loaded scaffolds were treated against the most common microorganisms that cause the infection, such as S.aureus, E.coli, and P.aeruginosa, and resulted in inhibition zones between 10 and 21 mm. MTT assay was performed by culturing human adipose-derived mesenchymal stem cells (hAD MSCs) on the scaffolds. The morphology of the hAD MSCs' attachment was tested with SEM analysis and hAD MSCs were able to attach, spread, and live on each scaffold even on the day of 7. The cumulative drug release kinetics of CIP and AMX from drug-loaded scaffolds were analysed in phosphate-buffered saline (pH: 7.4) within different time intervals of up to 14 days using a UV spectrophotometer. Furthermore, the drug release showed that the First-Order and Korsmeyer-Peppas models were the most suitable kinetic models. Animal testing was performed on SD rats, matrix and collagen deposition occurred on days 5 and 10, which were observed using Hematoxylin-eosin and Masson's trichrome staining. At the highest drug concentration, a better repair effect was observed. Results were promising and showed potential for novel treatment.

Improvement in the Sustained-Release Performance of Electrospun Zein Nanofibers via Crosslinking Using Glutaraldehyde Vapors

Volatile active ingredients in biopolymer nanofibers are prone to burst and uncontrolled release. In this study, we used electrospinning and crosslinking to design a new sustained-release active packaging containing zein and eugenol (EU). Vapor-phase glutaraldehyde (GTA) was used as the crosslinker. Characterization of the crosslinked zein nanofibers was conducted via scanning electron microscopy (SEM), mechanical properties, water resistance, and Fourier transform infrared (FT-IR) spectroscopy. It was observed that crosslinked zein nanofibers did not lose their fiber shape, but the diameter of the fibers increased. By increasing the crosslink time, the mechanical properties and water resistance of the crosslinked zein nanofibers were greatly improved. The FT-IR results demonstrated the formation of chemical bonds between free amino groups in zein molecules and aldehyde groups in GTA molecules. EU was added to the zein nanofibers, and the corresponding release behavior in PBS was investigated using the dialysis membrane method. With an increase in crosslink time, the release rate of EU from crosslinked zein nanofibers decreased. This study demonstrates the potential of crosslinking by GTA vapors on the controlled release of the zein encapsulation structure containing EU. Such sustainable-release nanofibers have promising potential for the design of fortified foods or as active and smart food packaging.

Exploring temperature-responsive drug delivery with biocompatible fatty acids as phase change materials in ethyl cellulose nanofibers

This study introduces a novel temperature-responsive drug delivery system using ethyl cellulose (EC) nanofibers encapsulating a eutectic mixture of lauric acid/stearic acid (LA/SA) as phase change materials (PCMs) and Rhodamine B (RhB) as a model drug. Employing blend electrospinning, the nanofibers achieved controlled drug release responsive to temperature changes. The peak shift of the carbonyl group in FTIR analysis confirmed drug-polymer compatibility, while the absence of RhB peaks in the XRD and DSC assessments revealed RhB's amorphous distribution within the fibers. Our findings demonstrate that RhB release is dependent on its loading, with a slow initial release (<2 %) for 1 % and 5 % RhB loadings and a burst release (~12 %) for 10 % loading. Notably, the release rate was tunable at 37 °C by adjusting LA/SA concentration. The optimal LA/SA loading for temperature-responsive release is identified as 10 %. Over 240 h, there is a 32 % increase in RhB release at 37 °C, and an additional 8 % increase at 40 °C, compared to 25 °C. This research illustrates the potential of PCM-integrated nanofibers in smart drug delivery, particularly for chemotherapy, antibiotics, and anti-inflammatory drugs, showcasing an innovative approach to improving therapeutic efficiency while reducing side effects.

Physicomechanical characterizations and in vitro release studies of electrospun ethyl cellulose fibers, solvent cast carboxymethyl cellulose films, and their composites

Frequent change of wound dressings introduces wound inflammation and infections. In this study, we electrospun phenytoin (PHT) loaded ethyl cellulose (EC) microfibers and solvent cast tetracycline hydrochloride (TCH) loaded carboxymethyl cellulose (CMC) films with the aim to demonstrate tailorable in vitro drug release behaviors suitable for long-term use of wound dressings. Results from tensile testing showed a significant decrease in average elastic moduli from 8.8 ± 0.6 to 3.3 ± 0.3 MPa after incorporating PHT into EC fibers. PHT-loaded EC fibers displayed a slow and zero-ordered release up to 80 % of the total drug at 48 h, while TCH-loaded CMC films demonstrated a rapid and complete release within 30 min. Furthermore, drug-loaded EC/CMC composites were fabricated into fiber-in-film and fiber-on-film composites. Fiber-in-film composites showed stage release of TCH and PHT at 8 h, while fiber-on-film composites demonstrated simultaneous release of PHT and TCH with a prolonged release of TCH from CMC films. In general, electrospun PHT-loaded EC microfibers, solvent cast TCH-loaded CMC films, and their composites were studied to provide a fundamental scientific understanding on the novelty of the ability to modulate drug release characteristics based on the composite designs.

Ethyl cellulose/gelatin/β-cyclodextrin/curcumin nanofibrous membrane with antibacterial and formaldehyde adsorbable capabilities for lightweight and high-performance air filtration

Functionalization of bio-based nanofibers is the development tendency of high-performance air filter. However, the conventional structural optimization strategy based on high solution conductivity greatly hinders the development of fully bio-based air filter, and not conducive to sustainable development. This work fabricated fully bio-based nanofibrous membrane with formaldehyde-adsorbable and antibacterial capabilities by electrospinning low-conductivity solution for high-performance air filtration and applied to lightweight mask. The "water-like" ethyl cellulose (EC) was selected as the base polymer to "nourish" functional materials of gelatin (GE), β-cyclodextrin (βCD), and curcumin (Cur), thus forming a solution system with high binding energy differences and electrospinning into ultrafine bimodal nanofibers. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.25 %, 53 Pa, and 0.092 Pa-1, respectively; the bacteriostatic rates against Escherichia coli and Staphylococcus aureus were 99.9 % and 99.4 %, respectively; the formaldehyde adsorption capacity was 442 μg/g. This is the first report on antibacterial and formaldehyde-adsorbable high-performance air filter entirely made from bio-based materials. This simple strategy will greatly broaden the selection of materials for preparing high-performance multifunctional air filter, and promote the development of bio-based air filter.

Intelligent food tag: A starch-anthocyanin-based pH-sensitive electrospun nanofiber mat for real-time food freshness monitoring

A starch-based nanofiber mat was prepared for real-time monitoring of food freshness for the first time. UV-vis results showed that roselle anthocyanins (RS) conferred a wide pH sensing range on the nanofiber mat. The prepared nanofiber mats demonstrated good color visibility (total color difference value (ΔE) increased to 56.4 ± 0.7) and a reversible response (within 120 s). Scanning electron microscopy and Fourier transform infrared spectroscopy results suggested that the nanofibers had smooth surfaces without beaded fibers and that RS was well embedded into the nanofibers. The introduction of RS improved the thermal stability of the nanofibers. Color stability tests revealed that the nanofibers exhibited excellent color stability (maximum change ΔE = 1.57 ± 0.03) after 14 days of storage. Pork and shrimp freshness tests verified that the nanofibers could effectively reflect the dynamic freshness of pork and shrimp. Nontoxic, degradable and responsive characteristics make the pH-sensitive nanofiber mat a smart food label with great application potential.

Development of gallic acid-loaded ethylcellulose fibers as a potential wound dressing material

In this study, novel fibers were designed based on ethylcellulose (EC), loaded with different concentrations of gallic acid (GA) using the electrospinning technique, in order to investigate the potential of these materials as wound dressings. The chemical structure and morphology, along with the antimicrobial and biocompatibility tests of the EC_GA fibers were investigated. To observe the chemical interactions between the components, fourier transform infrared spectroscopy (FTIR) was used. The morphological analyzes were performed using scanning electron microscope (SEM). The uniaxial tensile test machine was used to obtain mechanical performance of the fibers. MTT assay was applied to get the biocompatibility properties of the fibers and antimicrobial test was applied to obtain the antimicrobial activity of the fibers. Based on the obtained results, the highest viability value of 67.4 % was obtained for 10%EC_100GA on the third day of incubation, demonstrating that with the addition of a higher concentration of GA, the cell viability increases. The antimicrobial tests, evaluated against Staphylococcus (S.) aureus, Escherichia (E.) coli, Pseudomonas (Ps.) aeruginosa and Candida (C.) albicans, showed a >90 % microbial reduction capacity correlated with a logarithmic reduction ranging from 0.63 to 1, for 10%EC_100 GA. In vitro release tests of GA from the fibers showed that GA was totally released from 10%EC_100 GA fibers after 2880 min, demonstrating a controlled release profile. These findings demonstrated that EC_GA fibers may be suitable for application in biomedical fields such as wound dressing materials. However, further studies should be performed to increase the biocompatibility properties of the fibers.

Applications of Prolamin-Based Edible Coatings in Food Preservation: A Review

Foods are susceptible to deterioration and sour due to external environmental influences during production and storage. Coating can form a layer of physical barrier on the surface of foods to achieve the purpose of food preservation. Because of its good barrier properties and biocompatibility, prolamin-based film has been valued as a new green and environment-friendly material in the application of food preservation. Single prolamin-based film has weaknesses of poor toughness and stability, and it is necessary to select appropriate modification methods to improve the performance of film according to the application requirements. The practical application effect of film is not only affected by the raw materials and the properties of the film itself, but also affected by the selection of preparation methods and processing techniques of film-forming liquid. In this review, the properties and selection of prolamins, the forming mechanisms and processes of prolamin-based coatings, the coating techniques, and the modifications of prolamin-based coatings were systematically introduced from the perspective of food coating applications. Moreover, the defects and deficiencies in the research and development of prolamin-based coatings were also reviewed in order to provide a reference for the follow-up research on the application of prolamin-based coatings in food preservation.

Electrospun Nanofibers: Shaping the Future of Controlled and Responsive Drug Delivery

Electrospun nanofibers for drug delivery systems (DDS) introduce a revolutionary means of administering pharmaceuticals, holding promise for both improved drug efficacy and reduced side effects. These biopolymer nanofiber membranes, distinguished by their high surface area-to-volume ratio, biocompatibility, and biodegradability, are ideally suited for pharmaceutical and biomedical applications. One of their standout attributes is the capability to offer the controlled release of the active pharmaceutical ingredient (API), allowing custom-tailored release profiles to address specific diseases and administration routes. Moreover, stimuli-responsive electrospun DDS can adapt to conditions at the drug target, enhancing the precision and selectivity of drug delivery. Such localized API delivery paves the way for superior therapeutic efficiency while diminishing the risk of side effects and systemic toxicity. Electrospun nanofibers can foster better patient compliance and enhanced clinical outcomes by amplifying the therapeutic efficiency of routinely prescribed medications. This review delves into the design principles and techniques central to achieving controlled API release using electrospun membranes. The advanced drug release mechanisms of electrospun DDS highlighted in this review illustrate their versatility and potential to improve the efficacy of medical treatments.

Encapsulation of quercetin into zein-ethyl cellulose coaxial nanofibers: Preparation, characterization and its anticancer activity

In order to efficiently improve the colon-targeted delivery of quercetin, the hydrophobic core-shell nanofibers were fabricated to encapsulate quercetin using ethyl cellulose as the shell and zein as the core by coaxial electrospinning. The encapsulation efficiency of coaxial nanofibers reached >97 %. FTIR and XRD results revealed the interactions between quercetin and wall materials and quercetin was encapsulated in an amorphous state. The thermal stability and surface hydrophobicity of coaxial nanofibers were improved compared to the uniaxial zein fibers. After in vitro gastrointestinal digestion, the quercetin release from core-shell nanofibers was <12.38 %, while the corresponding value for zein fibers was 36.24 %. DPPH and FRAP assays showed that there was no significant difference in the antioxidant activity of quercetin before and after encapsulation. Furthermore, the encapsulated quercetin exhibited similar anti-proliferative activity against HCT-116 cells compared to the free form. The results suggest these coaxial nanofibers have potential applications in functional foods.

Natural and biocompatible dressing unit based on tea carbon dots modified core-shell electrospun fiber for diabetic wound disinfection and healing

Wound infection and healing in patients with diabetes is one of the complex problems in trauma treatment. Therefore, designing and preparing an advanced dressing membrane for treating the wounds of such patients is essential. In this study, a zein film with biological tea carbon dots (TCDs) and calcium peroxide (CaO₂) as the main components for promoting diabetic wound healing was prepared by an electrospinning technique, which combines the advantages of natural degradability and biosafety. CaO₂ is a biocompatible material with a microsphere structure that reacts with water to release hydrogen peroxide and calcium ions. TCDs with a small diameter were doped in the membrane to mitigate its properties while improving the antibacterial and healing effects of the membrane. TCDs/CaO₂ was mixed with ethyl cellulose-modified zein (ZE) to prepare the dressing membrane. The antibacterial properties, biocompatibility and wound-healing properties of the composite membrane were investigated by antibacterial experiment, cell experiment and a full-thickness skin defect. TCDs/CaO₂ @ZE exhibited significant anti-inflammatory and wound healing-promoting properties in diabetic rats, without any cytotoxicity. This study is meaningful in developing a natural and biocompatible dressing membrane for diabetic wound healing, which shows a promising application in wound disinfection and recovery in patients with chronic diseases.

Cellulose nanofibrils and silver nanoparticles enhances the mechanical and antimicrobial properties of polyvinyl alcohol nanocomposite film

Recent findings of microplastics in marine food such as fish, crabs and shrimps necessitate the need to develop biodegradable packaging materials. This study reports on the development of a biodegradable packing material from cellulose nanofibril-polyvinyl alcohol nanocomposite embedded with silver nanoparticles. Microcrystalline cellulose was isolated from sugarcane bagasse via the kraft process followed by conversion of cellulose I to cellulose II using NaOH/urea/water solution. The nanofibrils were then isolated using (2,2,6,6-Tetramethylpiperidin-1-yl) oxyl (TEMPO) and used as a reinforcing element in polyvinyl alcohol composite prepared through solvent casting. The tensile strength, water solubility, optical properties, water vapor permeability and wettability of the prepared films were then evaluated. The antimicrobial potency of the films was evaluated using the disc diffusion antimicrobial assay against selected microorganisms.

A Straightforward Approach towards Antibacterial and Anti-Inflammatory Multifunctional Nanofiber Membranes with Sustained Drug Release Profiles

Preventing bacterial infection and controlling the inflammatory response occupy important positions in wound treatment. Although loading wound dressings with antibacterial or anti-inflammatory drugs/molecules is an effective approach to address these issues, simultaneous sustained release of these drugs remains challenging. Herein, hydrophilic polyhexamethylene guanidine hydrochloride (PHGC) and hydrophobic indomethacin (Indo) are loaded in hydrophilic polyvinyl alcohol (PVA) and hydrophobic polycaprolactone (PCL) nanofibers respectively by bidirectional electrospinning to form an antibacterial and anti-inflammatory PCL-Indo/PVA-PHGC wound dressing. The fabricated nanofiber membrane exhibits 100% disinfection activity to both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria because of the release of the broad-spectrum antibacterial molecule PHGC. Additionally, the loading of Indo in the nanofiber membrane enhances the expression level of IL-10, while inhibiting those of IL-6 and TNF-α in the RAW264.7 mouse cells. In the interwoven membrane of PCL and PVA fibers, the release of hydrophobic Indo is hindered by hydrophilic PHGC and PVA fibers, and similarly, the release of hydrophilic PHGC is hindered by hydrophobic Indo and PCL fibers. In conclusion, the PCL-Indo/PVA-PHGC nanofiber membrane has excellent antibacterial, anti-inflammatory, and sustained-release effects, and thus regulates the immune microenvironment of the cells to potentially promote wound healing.

Biomaterials for Tissue Engineering Applications and Current Updates in the Field: A Comprehensive Review

Tissue engineering has emerged as an interesting field nowadays; it focuses on accelerating the auto-healing mechanism of tissues rather than organ transplantation. It involves implanting an In Vitro cultured initiative tissue or a scaffold loaded with tissue regenerating ingredients at the damaged area. Both techniques are based on the use of biodegradable, biocompatible polymers as scaffolding materials which are either derived from natural (e.g. alginates, celluloses, and zein) or synthetic sources (e.g. PLGA, PCL, and PLA). This review discusses in detail the recent applications of different biomaterials in tissue engineering highlighting the targeted tissues besides the in vitro and in vivo key findings. As well, smart biomaterials (e.g. chitosan) are fascinating candidates in the field as they are capable of elucidating a chemical or physical transformation as response to external stimuli (e.g. temperature, pH, magnetic or electric fields). Recent trends in tissue engineering are summarized in this review highlighting the use of stem cells, 3D printing techniques, and the most recent 4D printing approach which relies on the use of smart biomaterials to produce a dynamic scaffold resembling the natural tissue. Furthermore, the application of advanced tissue engineering techniques provides hope for the researchers to recognize COVID-19/host interaction, also, it presents a promising solution to rejuvenate the destroyed lung tissues.

Facile microfluidic fabrication and characterization of ethyl cellulose/PVP films with neatly arranged fibers

Much attention and endeavor have been paid to developing biocompatible food packaging films. Here, ethyl cellulose (EC) and polyvinylpyrrolidone (PVP) were fabricated into films through a facile method, microfluidic spinning. Morphology observations showed that the fibers were neatly arranged with an average diameter of 1-4 μm. FTIR and X-ray diffraction analysis suggested the existence of good compatibility and interaction between EC and PVP. Thermogravimetric analysis demonstrated that PVP ameliorates the thermal properties; moreover, the tensile properties were improved, with tensile strength (TS) and Young's modulus up to 11.10 ± 1.04 MPa and 350.16 ± 45.46 MPa, respectively. The optimal formula was EC/PVP (2:3), of which the film displayed an enhanced TS of 4.61 ± 1.15 MPa and a modified water contact angle of 61.8 ± 4.4°, showing fine tensile and hydrophilic performance. This study provides a facile and green film fabrication method promising to be used for food wrapping.

Recent advances in self-assembly behaviors of prolamins and their applications as functional delivery vehicles

Prolamins are a group of storage proteins (zeins, kafirins, hordeins, secalins, gliadins, glutenins, and avenins) found in the endosperm of cereal grains and characterized by high glutamine and proline content. With the high proportion of nonpolar amino acids (40-80%) and peculiar solubility (alcohol (60-90%), acetic acid, and alkaline solutions), prolamins exhibit tunable self-assembly behaviors. In recent years, research practices of utilizing prolamins as green building materials of functional delivery vehicles to improve the health benefits of bioactive compounds have surged due to their attractive advantages (e.g. sustainability, biocompatibility, fabrication potential, and cost-competitiveness). This article covers the recent advances in self-assembly behaviors leading to the fabrication of nanoparticles, fibers, and films in the bulk water phase, at the air-liquid interface, and under the electrostatic field. Different fabrication methods, including antisolvent precipitation, evaporation induced self-assembly, thermal treatment, pH-modulation, electrospinning, and solvent casting for assembling nanoarchitectures as functional delivery vehicles are highlighted. Emerging industrial applications by mapping patents, including encapsulation and delivery of bioactive compounds and probiotics, active packaging, Pickering emulsions, and as functional additives to develop safer, healthier, and sustainable food products are discussed. A future perspective concerning the fabrication of prolamins as advanced materials to promote their commercial food applications is proposed.

Role of Biomaterials Used for Periodontal Tissue Regeneration—A Concise Evidence-Based Review

Periodontal infections are noncommunicable chronic inflammatory diseases of multifactorial origin that can induce destruction of both soft and hard tissues of the periodontium. The standard remedial modalities for periodontal regeneration include nonsurgical followed by surgical therapy with the adjunctive use of various biomaterials to achieve restoration of the lost tissues. Lately, there has been substantial development in the field of biomaterial, which includes the sole or combined use of osseous grafts, barrier membranes, growth factors and autogenic substitutes to achieve tissue and bone regeneration. Of these, bone replacement grafts have been widely explored for their osteogenic potential with varied outcomes. Osseous grafts are derived from either human, bovine or synthetic sources. Though the biologic response from autogenic biomaterials may be better, the use of bone replacement synthetic substitutes could be practical for clinical practice. This comprehensive review focuses initially on bone graft replacement substitutes, namely ceramic-based (calcium phosphate derivatives, bioactive glass) and autologous platelet concentrates, which assist in alveolar bone regeneration. Further literature compilations emphasize the innovations of biomaterials used as bone substitutes, barrier membranes and complex scaffold fabrication techniques that can mimic the histologically vital tissues required for the regeneration of periodontal apparatus.

Tea polyphenol/glycerol-treated double-network hydrogel with enhanced mechanical stability and anti-drying, antioxidant and antibacterial properties for accelerating wound healing

Frequent dressing changes can result in secondary wound damage. Therefore, it is of great significance to construct a wound dressing that can be used for a long time without changing. Here, a double-network hydrogel was synthesized through hydrogen bonding interactions of tea polyphenol (TP)/glycerol with photo-crosslinked N-acryloyl glycinamide (NAGA), gelatin methacrylate (GelMA), and nanoclay hydrogel. The glycerol/water solvent slowed the diffusion of TP into the NAGA/GelMA/Laponite (NGL)hydrogel, thereby avoiding excessive crosslinking, and forming a uniform network. The hydrogel exhibited excellent water retention (84% within 28 days). Additionally, due to the hygroscopicity of glycerol, the hydrogel's mechanical strength (0.73-1.14 MPa) and tensile strain (207%-353%) increased further after 14 days in an open environment. Additionally, the hydrogel exhibited superior anti-ultraviolet and antioxidant properties, which effectively alleviated the wound site's oxidative stress and accelerated wound healing. Moreover, antibacterial activity was observed against both E. coli and S. aureus in the hydrogel wound dressing. Thus, by promoting wound closure, angiogenesis and collagen deposition, the double-network NGLG20/TG hydrogel dressing can successfully accelerate wound healing. The multifunctional double-network hydrogel, therefore, shows immense potential as an ideal candidate for wound dressings because it is long-lasting and prevents secondary damage caused by frequent dressing changes.

Bio-inspired hydrogels with fibrous structure: A review on design and biomedical applications

Numerous tissues in the human body have fibrous structures, including the extracellular matrix, muscles, and heart, which perform critical biological functions and have exceptional mechanical strength. Due to their high-water content, softness, biocompatibility and elastic nature, hydrogels resemble biological tissues. Traditional hydrogels, on the other hand, have weak mechanical properties and lack tissue-like fibrous structures, limiting their potential applications. Thus, bio-inspired hydrogels with fibrous architectures have piqued the curiosity of biomedical researchers. Here, we review fabrication strategies for fibrous hydrogels and their recent progress in the biomedical fields of wound dressings, drug delivery, tissue engineering scaffolds and bioadhesives. Challenges and future perspectives are also discussed.

Combining Coaxial Electrospinning and 3D Printing: Design of Biodegradable Bilayered Membranes with Dual Drug Delivery Capability for Periodontitis Treatment

Periodontitis is a chronic inflammatory disease that can lead to significant destruction of tooth-supporting tissues, compromising dental function and patient's health. Although the currently employed treatment approaches can limit the advance of the disease, the development of multifunctional and hierarchically structured materials is still in demand for achieving successful tissue regeneration. Here, we combine coaxial electrospinning and 3D printing techniques to prepare bilayered zein-based membranes as a potential dual drug delivery platform for periodontal tissue regeneration. A layer of core-sheath electrospun nanofibers consisting of poly(ethylene oxide) (PEO)/curcumin (Curc)/tetracycline hydrochloride (TH) as the core and zein/poly(ε-caprolactone)(PCL)/β-glycerolphosphate (β-GP) as the sheath was deposited over a 3D printed honeycomb PLA/zein/Curc platform in order to render a bilayered structure that can mimic the architecture of periodontal tissue. The physicochemical properties of engineered constructs as well as the release profiles of distinct drugs were mainly controlled by varying the concentration of zein (10, 20, 30%, w/w relative to dry PCL) on the sheath layer of nanofibers, which displayed average diameters ranging from 150 to 400 nm. In vitro experiments demonstrated that the bilayered constructs provided sustained release of distinct drugs over 8 days and exhibited biocompatibility toward human oral keratinocytes (Nok-si) (cell viability >80%) as well as antibacterial activity against distinct bacterial strains including those of the red complex such as Porphyromonas gingivalis and Treponema denticola, which are recognized to elicit aggressive and chronic periodontitis. Our study reveals the potential of zein-based bilayered membranes as a dual drug delivery platform for periodontal tissue regeneration.

Zein as a versatile biopolymer: different shapes for different biomedical applications

In recent years, the interest regarding the use of proteins as renewable resources has deeply intensified. The strongest impact of these biomaterials is clear in the field of smart medicines and biomedical engineering. Zein, a vegetal protein extracted from corn, is a suitable biomaterial for all the above-mentioned purposes due to its biodegradability and biocompatibility. The controlled drug delivery of small molecules, fabrication of bioactive membranes, and 3D assembly of scaffold for tissue regeneration are just some of the topics now being extensively investigated and reported in the literature. Herein, we review the recent literature on zein as a biopolymer and its applications in the biomedical world, focusing on the different shapes and sizes through which it can be manipulated.

Zein a versatile biomaterial in the biomedical field. Easy to chemically functionalize with good emulsification properties, can be employed in drug delivery, fabrication of bioactive membranes and 3D scaffolds for tissue regeneration.

Electrospun ethyl cellulose/poly caprolactone/gelatin nanofibers: The investigation of mechanical, antioxidant, and antifungal properties for food packaging

The purpose of the present research was to fabricate ethylcellulose (ECL)/polycaprolactone (PCL)/gelatin (GEL) electrospun nanofibers containing Zataria multiflora essential oil (ZEO) and zinc oxide nanoparticle (ZnO) to provide an appropriate substrate for food packaging. The ECL/PCL/GEL was incorporated with ZEO and ZnO at the concentrations of 10, 20, 30 and 50 wt% and 3 wt%, respectively. The results of ECL/PCL/GEL/ZEO/ZnO nanofiber exhibited uniform morphology with a mean diameter ranging from 361.85 ± 18.7 to 467.33 ± 14.50 nm and enhanced thermal stability. The ECL/PCL/GEL/ZEO/ZnO nanofiber had the highest mechanical parameters, such as young's modulus (437.49 ± 18), tensile strength (7.88 ± 0.7), and elongation at break (5.02 ± 0.6) and water contact angle (61.13 ± 0.5), compared with the other nanofibers. The cell viability during 48 and 72 h was obtained to be about more than 80% for all the nanofibers. Additionally, the ECL/PCL/GEL incorporated with 50% ZEO and 3% ZnO displayed the highest antioxidant activity (34.61 ± 1.98%) and antifungal properties against Penicillium notatum and Aspergillus niger. In general, the ECL/PCL/GEL with the weight ratio of 20:70:10 nanofiber incorporated with 30% ZEO and 3% ZnO was obtained to have appropriate mechanical, antioxidant, and antimicrobial properties and thermal stability.

Zein structure and its hidden zearalenone: Effect of zein extraction methods

Zein, the plant protein, has received great attention in the last years. However, hidden zearalenone (ZEN), the zein-bound ZEN present in zein would have a great hazard to humans and animals. To date, the fates of hidden ZEN under different extraction methods of zein have not been clarified. In this study, the effect of zein extraction methods on conversion of free ZEN with hidden ZEN and its corresponding mechanism were studied. Results showed that the acid extraction condition promoted the formation of hidden ZEN (up to 92.03%), which was closely related to increased hydrophobic cavity of zein. However, alkaline extraction condition caused the conversion of hidden ZEN (from 58.82% to 13.33%) into free ZEN (from 41.18% to 86.67%), which was attributed to the great denaturation of zein. This study is of great significance for controlling hidden ZEN during zein extraction and maize processing.

Electrospun nanofiber based on Ethyl cellulose/Soy protein isolated integrated with bitter orange peel extract for antimicrobial and antioxidant active food packaging

The present work was aimed to produce a novel bioactive nanofiber (NFs) based on Ethyl cellulose (EC), Soy protein isolated (SPI), and containing Bitter orange peel extract (BOPE) by electrospinning technology. The EC/SPI NFs were formulated with different weight ratios of 1:1, 2:1, and 1:2 denoted as ES11, ES21, and ES12, respectively, and investigated by several analyses. Based on the obtained results, the maximum hydrogen interactions between these two polymers, ES11 NFs offered a uniform morphology without bead with the diameter of 185.33 nm as a result of the compatibility of the polymer solutions of EC and SPI. Moreover, appropriate thermal stability was presented along with more porosity (78%), maximum water vapor transmission rate (657 g/m2.24h), good tensile stress (6.12 MPa), and acceptable water contact angel (82.3°). Therefore, ES11 NFs were selected as the optimal sample for incorporation of the BOPE as the antibacterial and antioxidant agent. According to the antioxidant activity test, the highest concentration (20% wt) of this extract increased the antioxidant activity of NF around 64.7% and also inhibited the growth of pathogenic bacteria (S. areus, and E. coli). Therefore, the ES11 electrospun NFs containing 20% BOPE can be a beneficial system to increase the safety and quality of foods.

Encapsulation of Pharmaceutical and Nutraceutical Active Ingredients Using Electrospinning Processes

Electrospinning is an inexpensive and powerful method that employs a polymer solution and strong electric field to produce nanofibers. These can be applied in diverse biological and medical applications. Due to their large surface area, controllable surface functionalization and properties, and typically high biocompatibility electrospun nanofibers are recognized as promising materials for the manufacturing of drug delivery systems. Electrospinning offers the potential to formulate poorly soluble drugs as amorphous solid dispersions to improve solubility, bioavailability and targeting of drug release. It is also a successful strategy for the encapsulation of nutraceuticals. This review aims to briefly discuss the concept of electrospinning and recent progress in manufacturing electrospun drug delivery systems. It will further consider in detail the encapsulation of nutraceuticals, particularly probiotics.

Fabrication and evaluation of hesperidin loaded polyacrylonitrile/polyethylene oxide nanofibers for wound dressing application

In this study, hesperidin (HPN) loaded polyacrylonitrile (PAN)/polyethylene oxide (PEO) electrospun nanofibers were prepared for use as wound dressing. Accordingly, HPN loaded hybrid nanofibers were generated via electrospinning. A full factorial design was then applied to evaluate the influence of formulation variables including PEO amount, HPN amount and total polymer amount on the nanofiber features. Fabricated membranes were evaluated in terms of morphology, diameter, entrapment efficiency (EE) %, drug loading (DL) %, release efficiency (RE) %, swelling % and mechanical properties. Analysis of the obtained data showed that the amount of PEO was the most effective factor impacting the swelling and release percentage; by raising the amount of PEO from 20% to 40%, the swelling % and release rate were considerably increased. The optimized nanofibers were found to be non-beaded, smooth and cylindrical with fiber diameter of 126.14 ± 23.96 nm, EE% of 38.58 ± 6.06, DL% of 5.36 ± 0.83, swelling % of 859.90 ± 33.49, RE % of 78.49 ± 0.21, UTS of 0.79 ± 0.13 MPa and Young's moduli of 20.91 ± 2.13 MPa. The physical state of HPN in optimized hybrid nanofibers was examined and the related XRD analysis revealed that HPN was either molecularly dispersed, or it existed in an amorphous state in the nanofibers. The in vivo studies also demonstrated that the wound healing rate in the case of HPN loaded nanofibers was higher when compared with other groups. Moreover, according to H&E and MT stain results, HPN loaded nanofibers did promote the regeneration of skin more effectively, as compared with HPN -free nanofibers. Overall, HPN loaded nanofibers mats prepared in this study have the potential to serve as wound dressings.

All-Fiber-Structured Triboelectric Nanogenerator via One-Pot Electrospinning for Self-Powered Wearable Sensors

With the rapid development in wearable electronics, self-powered devices have recently attracted tremendous attention to overcome the restriction of conventional power sources. In this regard, a simple, scalable, and one-pot electrospinning fabrication technique was utilized to construct an all-fiber-structured triboelectric nanogenerator (TENG). Ethyl cellulose was co-electrospun with polyamide 6 to serve as the triboelectric positive material, and a kind of strongly electronegative conductive material of MXene sheet was innovatively incorporated into poly(vinylidene fluoride) nanofiber to act as a triboelectric negative material. The assembled all-fiber TENG exhibited excellent durability and stability, as well as excellent output performance, which reached a peak power density of 290 mW/m² at a load resistance of 100 MΩ. More importantly, the TENG was capable of harvesting energy to power various light-emitting diodes (LEDs) and monitoring human movements as a self-powered sensor, providing a promising application prospect in wearable electronics.

Electrospun fixed dose combination fibers for the treatment of cardiovascular disease

Fixed dose combinations (FDCs) offer an accessible way to simplify complex therapeutic regimens by the simultaneous presentation of multiple drugs in a single entity to the patient. However, encapsulation of hydrophobic drugs into FDCs possess a number of technical challenges. Electrospinning comprises a convenient way to incorporate multiple hydrophobic drugs into a single formulation in a single step, via the use of an appropriate organic solvent system during fabrication. In this study, we report a series of novel fiber formulations comprising ethyl cellulose loaded with two hydrophobic drugs, spironolactone and nifedipine, either individually or in combination. The drugs are found to be present in the fibers in the form of amorphous solid dispersions, and these are stable at room temperature for 4 months. The products showed extended release profiles over more than 30 h. This formulation strategy offers potential to manage chronic cardiovascular conditions and overcome patient related non-adherence by providing a simplified treatment model.

Fabrication of curcumin-zein-ethyl cellulose composite nanoparticles using antisolvent co-precipitation method

The stable colloidal nano-dispersion of curcumin (CU) loaded zein-ethyl cellulose (ZN-EC) as three hydrophobic agent in water was prepared using two step antisolvent co-precipitation method. The EC coated NPs were prepared by adding EC in ethyl acetate to the ZN-CU NPs at a concentration ratio of 1: 3.5 w/v. The prepared colloidal suspension of ZN-EC showed high physical stability during storage time. The particle diameters and zeta potential values of ZN-CU and ZN-CU-EC colloidal suspensions were 140 ± 12 nm, 38 ± 2 mV and 179 ± 12 nm, 12 ± 2 mV, respectively. Based on Scanning electron microscopy (SEM) images, participation of EC on the surface of ZN-CU particles could reduce the sticky appearance of particles. Encapsulation efficiency of CU in NPs did not improve after precipitation of EC, but the stability of NPs against pH changes, increased and release rate of CU from NPs at different pH values (3-8) were significantly reduced in comparison of ZN-CU NPs. The EC coated NPs showed the excessive protection for CU antioxidant activity during storage. In conclusion, the prepared NPs, with high physical stability, have good potential for encapsulation and delivery of CU to colon region.

Zein nanofibers via deep eutectic solvent electrospinning: tunable morphology with super hydrophilic properties

The use of organic solvents for the preparation of nanofibers are challenged due to their volatile and hazardous behavior. Recently deep eutectic solvents (DES) are widely recognized as non-volatile and non-hazardous solvents which never been utilized directly for nanofabrication via electrospinning. Here, we present the preparation of Zein nanofibers using deep eutectic solvents (DES-Zein). The DES-Zein nanofibers were produced at an optimized polymer concentration of 45% (w/w) with pH 7.3 and electroconductivity 233 mS cm-1. DES-Zein nanofibers showed aligned to tweed like cedar leaf morphology tuned by varying the spreading angle from 0° to 90°. In contrast to hydrophobic conventional Zein nanofibers, DES-Zein nanofibers showed super hydrophilic character and about 200 nm finer average diameter. The proposed method of preparing Zein nanofibers using DES opens a new door to continuous electrospinning with tunable morphology, having potential to be used for environmental and biomedical applications.

Silver sulfadiazine-loaded electrospun ethyl cellulose/polylactic acid/collagen nanofibrous mats with antibacterial properties for wound healing

Recently, the electrospun nanofiber mats with appropriate properties for applications in the biomedical area has been more considered. In this regard, we successfully fabricated a novel antibacterial nanofiber mat (ethyl cellulose/poly lactic acid/collagen) (EC/PLA/collagen) incorporated with silver sulfadiazine (AgSD) and then analyzed with the required tests. AgSD was loaded in the developed mats with different contents (0.25%, 0.5% and 0.75%) and then electrospun to prepare nanofiber mats. To check the chemical structure of the developed mat, Fourier transform infrared spectroscopy (FTIR) was assessed. Surface morphological studies were performed by Scanning Electron Microscopy (SEM), which displayed uniform nanofiber mats without any bead formation. When the hydrophilicity was enhanced by decreasing the blending ratios of EC/PLA, the thermal stability of the nanofibers was reduced. The water contact angle (WCA) of NFs enhanced by decreasing the blending ratios of EC/PLA. The antibacterial properties showed the inhibition activity against Bacillus (9.71 ± 1.15 mm) and E. coli (12.46 ± 1.31 mm) bacteria. Besides, nanofibers have improved cell proliferation and adhesion with any cytotoxic effect on NIH 3T3 fibroblast cells. According these results, it seems that the developed mats would be effective scaffold for application in wound dressings.

Preparation and Characterization of PVA-Co-PE Drug-Loaded Nanofiber Membrane by Electrospinning Technology

A new transdermal drug delivery system of nanofiber membrane with good biocompatibility and high drug loading was developed by electrospinning technology in this study. Using vinyl alcohol-co-ethylene (PVA-co-PE) polymer as a spinning matrix and non-steroidal anti-inflammatory drug (NSAID) sulindac (SUL) as a model drug, the SUL@PVA-co-PE nanofiber membrane was prepared and characterized systematically. The morphology, molecular vibrational transitions, thermogravimetric attributes, and in vitro drug release and transdermal characteristics of drug-loaded nanofiber membranes were analyzed. The results indicated that the surface of PVA-co-PE nanofibers was uniform and smooth with the diameter ranged from 461 to 696 nm. Notably in vitro simulation experiments demonstrated that SUL@PVA-co-PE nanofiber membrane could provide a continuous drug release to reach the effective concentration of the drug, and exhibited significantly higher cumulative drug permeability compared to commercially available patches, Taken together, PVA-co-PE nanofiber membranes exhibited the characteristics of high drug loading and stability, and represented the potential to be utilized as a new transdermal drug delivery carrier with pronounced development prospect.

Hierarchical porous nanofibers containing thymol/beta-cyclodextrin: Physico-chemical characterization and potential biomedical applications

As an effective natural antibacterial component, the low water solubility of thymol (THY) has stemmed its potential in biomedical application. Here, β-cyclodextrin (β-CD) and THY were self-assembled to form water-soluble inclusion complex (IC). The successful formation of IC was confirmed via ¹H NMR. As an antibacterial agent, the resultant IC was then incorporated into cellulose acetate (CA) fibrous matrix with hierarchical structure (nanopores on porous fibrous webs) via electrospinning (CA/THY/β-CD), and the pure THY was also encapsulated into CA for comparison (CA/THY). In vitro dissolution tests demonstrated that CA/THY/β-CD fibrous membrane exhibited sustained drug release, which abided by non-Fickian diffusion. Besides, the CA/THY/β-CD fibrous membrane exhibited more effective and long-lasting antibacterial activity against S. aureus. Furthermore, the combination of hierarchical porous structure with sustained drug release endowed the CA/THY/β-CD fibrous membrane with good cytocompatibility. Taken together, the CA/THY/β-CD fibrous membrane could be an attractive candidate for wound dressing material.