Plasmon enhanced photocatalytic and antimicrobial activities of Ag-TiO2 nanocomposites under visible light irradiation prepared by DBD cold plasma treatment

Advanced photocatalytic materials based degradation of micropollutants and their use in hydrogen production - a review

The use of pharmaceuticals, dyes, and pesticides in modern healthcare and agriculture, along with expanding industrialization, heavily contaminates aquatic environments. This leads to severe carcinogenic implications and critical health issues in living organisms. The photocatalytic methods provide an eco-friendly solution to mitigate the energy crisis and environmental pollution. Sunlight-driven photocatalytic wastewater treatment contributes to hydrogen production and valuable product generation. The removal of contaminants from wastewater through photocatalysis is a highly efficient method for enhancing the ecosystem and plays a crucial role in the dual-functional photocatalysis process. In this review, a wide range of catalysts are discussed, including heterojunction photocatalysts and various hybrid semiconductor photocatalysts like metal oxides, semiconductor adsorbents, and dual semiconductor photocatalysts, which are crucial in this dual function of degradation and green fuel production. The effects of micropollutants in the ecosystem, degradation efficacy of multi-component photocatalysts such as single-component, two-component, three-component, and four-component photocatalysts were discussed. Dual-functional photocatalysis stands out as an energy-efficient and cost-effective method. We have explored the challenges and difficulties associated with dual-functional photocatalysts. Multicomponent photocatalysts demonstrate superior efficiency in degrading pollutants and producing hydrogen compared to their single-component counterparts. Dual-functional photocatalysts, incorporating TiO2, g-C3N4, CeO2, metal organic frameworks (MOFs), layered double hydroxides (LDHs), and carbon quantum dots (CQDs)-based composites, exhibit remarkable performance. The future of synergistic photocatalysis envisions large-scale production facilitate integrating advanced 2D and 3D semiconductor photocatalysts, presenting a promising avenue for sustainable and efficient pollutant degradation and hydrogen production from environmental remediation technologies.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Hybrid Materials Obtained by Immobilization of Biosynthesized Ag Nanoparticles with Antioxidant and Antimicrobial Activity

Ag nanoparticles (AgNPs) were biosynthesized using sage (Salvia officinalis L.) extract. The obtained nanoparticles were supported on SBA-15 mesoporous silica (S), before and after immobilization of 10% TiO2 (Degussa-P25, STp; commercial rutile, STr; and silica synthesized from Ti butoxide, STb). The formation of AgNPs was confirmed by X-ray diffraction. The plasmon resonance effect, evidenced by UV-Vis spectra, was preserved after immobilization only for the sample supported on STb. The immobilization and dispersion properties of AgNPs on supports were evidenced by TEM microscopy, energy-dispersive X-rays, dynamic light scattering, photoluminescence and FT-IR spectroscopy. The antioxidant activity of the supported samples significantly exceeded that of the sage extract or AgNPs. Antimicrobial tests were carried out, in conditions of darkness and white light, on Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli and Candida albicans. Higher antimicrobial activity was evident for SAg and STbAg samples. White light increased antibacterial activity in the case of Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa). In the first case, antibacterial activity increased for both supported and unsupported AgNPs, while in the second one, the activity increased only for SAg and STbAg samples. The proposed antibacterial mechanism shows the effect of AgNPs and Ag+ ions on bacteria in dark and light conditions.

4-Nitrophenol reduction and antibacterial activity of Ag-doped TiO2 photocatalysts

Water contamination by organic pollutants is a serious environmental problem. 4-Nitrophenol (4-NP) is a potentially harmful chemical, which is commonly present in industrial effluents and can severely damage human health. Photocatalytic reduction of hazardous 4-NP by nano-sized materials to produce 4-aminophenol (4-AP), which is a commercially valuable product, is a promising alternative as the process is framed within the circular economy. In this context, Ag-doped TiO2 (AT) catalysts were synthesized by liquid impregnation and reduction techniques, and their structure, morphology, elemental composition, textural, and light absorption properties were evaluated by XRD, Raman spectroscopy, SEM, TEM, EDS, BET, and DRS spectroscopy. AT catalysts exhibited an enhanced photocatalytic reduction of 4-NP into 4-aminophenol (4-AP) in the presence of NaBH4. Among the tested catalysts, AT21 prepared by a simple aqueous reduction method showed the highest activity reaching about 98% 4-NP reduction within 10 min. Antibacterial tests of these catalysts against Bacillus subtilis, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa revealed that AT21 also exhibited the lowest minimum inhibitory concentration, suggesting that it has the strongest antibacterial activity. These findings suggest that AT21 catalyst with improved catalytic and antibacterial properties can potentially be utilized for the remediation of 4-NP-contaminated water environment.

Plasmon-Sensitized Silica-Titanium Aerogels as Potential Photocatalysts for Organic Pollutants and Bacterial Strains

Photocatalysis reactions are of great interest as an effective tool against the profusely increasing population of antibiotic-resistant bacteria species. In particular, the promising evidence on plasmon-sensitized titanium dioxide (TiO2) photocatalysis inspired us to investigate their antibacterial activity stemming from the photogenerated reactive oxygen species (ROS). Herein, TiO2 nanostructures were grown in situ within a silica (SiO2) aerogel matrix with high surface area and porosity, and their ROS-related phototoxic effects against Escherichia coli bacteria were investigated under solar- and visible-light irradiations. Photodegradation profiles obtained from Rhodamine B (RhB) organic dye used as a chemical probe proved that the types of ROS produced by SiO2/TiO2 aerogels varied depending on the electromagnetic spectrum portion that was used during material irradiation. Further, the SiO2/TiO2 aerogel matrix was decorated with silver-gold nanostars (Ag@Au NSs) to enhance its photocatalytic efficiency under visible light irradiations. Our design showed that plasmon-enriched composite aerogels efficiently boosted ROS production under visible light exposures and that the structures containing Ag@Au NSs showed a much more effective antibacterial effect compared to their counterparts.

Synthesis and antibacterial activities of Ag-TiO2/ZIF-8

In recent years, massive bacterial infections have led to human illness and death, reminding us of the urgent need to develop effective and long-lasting antimicrobial materials. In this paper, Ag-TiO2/ZIF-8 with good environmental friendliness and biological antibacterial activity was prepared by solvothermal method. The structure and morphology of the synthesized materials were characterized by XRD, FT-IR, SEM-EDS, TEM, XPS, and BET. To investigate the antibacterial activity of the synthesized samples, Escherichia coli and Bacillus subtilis were used as target bacteria for experimental studies of zone of inhibition, bacterial growth curves, minimum bactericidal concentration and antibacterial durability. The results demonstrated that 20 wt.%Ag-TiO2/ZIF-8 had the best bacteriostatic effect on E. coli and B. subtilis under dark and UV conditions compared to TiO2 and ZIF-8. Under the same conditions, the diameter of the inhibition circle of 20 wt% Ag-TiO2/ZIF-8 is 8.5-11.5 mm larger than that of its constituent material 4 wt% Ag-TiO2, with more obvious antibacterial effect and better antibacterial performance. It is also proposed that the excellent antibacterial activity of Ag-TiO2/ZIF-8 is due to the synergistic effect of Ag-TiO2 and ZIF-8 under UV light. In addition, the prepared material has good stability and durability with effective antimicrobial activity for more than 5 months.

Current perspectives of metal-based nanomaterials as photocatalytic antimicrobial agents and their therapeutic modes of action: A review

Efforts to restrict the emergence and progression of multidrug-resistant bacterial strains should heavily involve the scientific community, including government bodies, researchers, and industries, in developing new and effective photocatalytic antimicrobial agents. Such changes warrant the modernization and upscaling of materials synthesis laboratories to support and expedite the mass production of materials at the industrial scale for the benefit of humankind and the environment. Despite the massive volume of publications reporting the potential usage of different types of metal-based nanomaterials as antimicrobial agents, reviews uncovering the similarities and differences among the various products remain lacking. This review details the basic and unique properties of metal-based nanoparticles, their use as photocatalytic antimicrobial agents, and their therapeutic modes of action. It shall be noted that compared to traditional antibiotics, the mode of action of photocatalytic metal-based nanomaterials for killing microorganisms are completely different, despite displaying promising performance against antibiotic-resistant bacteria. Besides, this review uncovers the differences in the mode of actions of metal oxide nanoparticles against different types of bacteria, as well as towards viruses. Last but not least, this review comprehensively describes previous published clinical trials and medical usages involving contemporary photocatalytic antimicrobial agents.

Gamma Radiation Synthesis of Ag/P25 Nanocomposites for Efficient Photocatalytic Degradation of Organic Contaminant

Titanium dioxide (TiO₂) has garnered significant attention among various photocatalysts, whereas its photocatalytic activity is limited by its wide bandgap and inefficient charge separation, making the exploration of new strategies to improve its photocatalytic performance increasingly important. Here, we report the synthesis of Ag/P25 nanocomposites through a one-step gamma-ray radiation method using AgNO₃ and commercial TiO₂ (Degussa P25). The resulting products were characterized by powder X-ray diffraction, UV-Vis diffused reflectance spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The effect of free radical scavengers, feed ratios of Ag/P25, and dose rates on the photocatalytic activity of the Ag/P25 nanocomposites were systematically investigated using rhodamine B under Xenon light irradiation. The results showed that the Ag/P25 photocatalyst synthesized with a feed ratio of 2.5 wt% and isopropyl alcohol as the free radical scavenger at a dose rate of 130 Gy/min exhibited outstanding photocatalytic activity, with a reaction rate constant of 0.0674 min^-1, much higher than that of P25. Additionally, we found that the particle size of Ag could be effectively controlled by changing the dose rate, and the Ag/P25 nanocomposites doped with smaller size of Ag nanoparticles performed higher photocatalytic activities. The synthesis strategy presented in this study offers new insight into the future development of highly efficient photocatalysts using radiation techniques.

Fabrication and Application of Ag, Black TiO2 and Nitrogen-Doped 3D Reduced Graphene Oxide (3D Black TiO2/Ag/N@rGO) Evaporator for Efficient Steam Generation

The scarcity of fresh water, which is aggravated by rapid economic development and population growth, is a major threat to the modern world. Solar-driven interfacial desalination and steam generation is a promising strategy that localizes heat at the air-water interface through appropriate thermal management and demonstrates efficient photothermal performance. In the current study, Ag, black TiO2, and nitrogen-doped 3D reduced graphene oxide (3D black TiO2/Ag/N@rGO) hierarchical evaporator was fabricated, and its morphology, elemental composition, porosity, broadband solar absorption potential, photothermal performance, and interfacial desalination potential were assessed. The 3D solar evaporator showed efficient solar absorption over the entire broadband UV-visible near-infrared (UV-Vis NIR) region and demonstrated 99% photothermal conversion efficiency and potential freshwater generation of 1.43 kg·m−2 h−1. The specific surface area and porosity analyses demonstrated an ultrahigh specific surface area, high pore volume, and a mesoporous structure, with a predominant pore diameter of 4 nm. The strong photothermal performance can be attributed to the nitrogen doping of the rGO, which boosted the electrocatalytic and photothermal activity of the graphene through the activation of the excess free-flowing π electrons of the sp2 configuration of the graphene; the broadband solar absorption potential of the black TiO2; and the localized surface plasmon resonance effect of the AgNPs, which induced hot electron generation and enhanced photothermal conversion. Hence, the high photothermal conversion efficiency attained can be attributed to the synergistic photothermal performances of the individual components and the high interfacial surface area, abundant heat, and mass transfer microcavities of the 3D hierarchical porous solar absorber, offering multiple reflections of light and enhanced solar absorption. The study highlights the promising potential of the 3D evaporator for real-word interfacial desalination of seawater, helping to solve the water shortage problem sustainably.

A Novel Photocatalytic Functional Coating Applied to the Degradation of Xylene in Coating Solvents under Solar Irradiation

A novel photocatalytic functional coating was prepared with g-C₃N₄/TiO₂ composites as the photocatalytic active component modified by dielectric barrier discharge (DBD), and it showed an efficient catalytic performance under solar light irradiation. The degradation of xylene released from fluorocarbon coating solvents by the g-C₃N₄/TiO₂ composite coatings was investigated under simulated solar irradiation. The degradation efficiency of the coating mixed with DBD-modified 10%-g-C₃N₄/TiO₂ showed a stable, long-lasting, and significantly higher activity compared to the coatings mixed with the unmodified catalyst. Ninety-eight percent of the xylene released from fluorocarbon coating solvents was successfully removed under solar light irradiation in 2 h. The properties of the catalyst samples before and after modification were evaluated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), ultraviolet-visible (UV-vis) spectroscopy, X-ray photoelectron spectroscopy (XPS), and other characterization techniques. The results suggested that DBD-modified g-C₃N₄/TiO₂ showed an improved capture ability and utilization efficiency of solar light with reduced band gap and lower complexation rate of electron-hole pairs. The prepared photocatalytic coating offers an environmentally friendly approach to purify the volatile organic compounds (VOCs) released from solvent-based coatings.

Degradation of pyrene in contaminated soil by the dielectric barrier discharge combined with the MnFe2O4 catalyst

In this work, a spinel oxide of MnFe₂O₄ was used as the dielectric barrier discharge (DBD) catalyst for the remediation of pyrene-contaminated soil. The performances were investigated through tuning voltage, frequency, catalyst dosage, and soil moisture. Under the optimal conditions, such as the voltage of 10.0 kV, the discharge frequency of 1.0 kHz, MnFe₂O₄ dosage of 0.3 g, air flow rate of 2.0 L min^-1, soil humidity of 5.3%, and degradation efficiency of DBD/MnFe₂O₄ for pyrene could reach 79.26% after 10 min treatment, which was much higher than that of DBD for pyrene of 42.56%. The DBD/MnFe₂O₄ system also showed the high degradation efficiency of other pollutants including phenanthrene, p-nitrophenol, and p-nitrophenol in contaminated soil. The enhancing mechanism of the DBD/MnFe₂O₄ system was discussed.

Heterogeneous Photocatalytic Chlorination of Methylene Blue Using a Newly Synthesized TiO2-SiO2 Photocatalyst

The titanium dioxide-silicon dioxide (TiO2-SiO2) nanocomposite used for the study was synthesized using a sol-gel method followed by UV-treatment. The physicochemical properties of the synthesized catalyst, TiO2-SiO2 were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS) and photoluminescence (PL). The photocatalytic degradation of methylene blue (MB) dye was evaluated in the presence of TiO2-SiO2 and reactive chlorine species (RCS) under experimental conditions. By comparing the important reaction processes in the study, including photocatalysis, chlorination and photocatalytic chlorination, it was found out that the process of photocatalytic chlorination had the highest photodegradation efficiency (95% at 60 min) of the MB under optimum reaction conditions (MB = 6 mg L−1, catalyst = 0.1 g and pH = 4). The enhanced removal of MB from the aqueous medium was identified because of the synergy between chlorination and photocatalysis activated in the presence of TiO2-SiO2. The mechanism of the photocatalytic chlorination process was scrutinized in the presence of various RCS and reactive oxygen species (ROS) scavengers. Based on the experimental data attained, Na2S2O3 exhibited the highest inhibitory effect on the degradation efficiency of MB, indicating that the RCS is the main contributor to visible light-induced photodegradation of MB.

Recent Advances in Plasmonic Photocatalysis Based on TiO2 and Noble Metal Nanoparticles for Energy Conversion, Environmental Remediation, and Organic Synthesis

Plasmonic photocatalysis has emerged as a prominent and growing field. It enables the efficient use of sunlight as an abundant and renewable energy source to drive a myriad of chemical reactions. For instance, plasmonic photocatalysis in materials comprising TiO₂ and plasmonic nanoparticles (NPs) enables effective charge carrier separation and the tuning of optical response to longer wavelength regions (visible and near infrared). In fact, TiO₂ -based materials and plasmonic effects are at the forefront of heterogeneous photocatalysis, having applications in energy conversion, production of liquid fuels, wastewater treatment, nitrogen fixation, and organic synthesis. This review aims to comprehensively summarize the fundamentals and to provide the guidelines for future work in the field of TiO₂ -based plasmonic photocatalysis comprising the above-mentioned applications. The concepts and state-of-the-art description of important parameters including the formation of Schottky junctions, hot electron generation and transfer, near field electromagnetic enhancement, plasmon resonance energy transfer, scattering, and photothermal heating effects have been covered in this review. Synthetic approaches and the effect of various physicochemical parameters in plasmon-mediated TiO₂ -based materials on performances are discussed. It is envisioned that this review may inspire and provide insights into the rational development of the next generation of TiO₂ -based plasmonic photocatalysts with target performances and enhanced selectivities.

Controlling morphology evolution of titanium oxide-gold nanourchin for photocatalytic degradation of dyes and photoinactivation of bacteria in the infected wound

We report a one-pot, room-temperature, morphology-controlled synthesis of titanium oxide (TiO_x)-gold nanocomposites (TiO_x-Au NCs) using HAuCl₄ and TiCl₃ as precursors, and catechin as reducing agent. TiO_x-Au NCs have a range of morphologies from star-like to urchin-like shape depending on the concentration of TiCl₃ in the reaction mixture. The urchin-shaped TiO_x-Au NCs exhibited excellent photocatalytic activity toward dye degradation due to strong light absorption, plasmon-induced excitation, high conductivity of the gold, and reduced hole-electron pair recombination. TiO_x-Au NCs have the advantage of a wide range of light absorption and surface plasmon absorption-mediated excitation due to their abundant gold spikes, which enabled the degradation of dyes over 97% in 60 min, using a xenon lamp as a light source. In addition, TiO_x-Au NCs are highly efficient for the photoinactivation of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), and Candida albicans through the photodynamic generation of reactive oxygen species (ROS) and damage to the bacterial membrane. The catechin derivatives on the NCs effectively promoted curing MRSA infected wounds in rats through inducing collagen synthesis, migration of keratinocytes, and neovascularization.

Recent progress on Ag/TiO2 photocatalysts: photocatalytic and bactericidal behaviors

For many decades, titanium dioxide (TiO₂) semiconductor has been extensively applied in several environmental applications due to its higher photocatalytic performances toward different organic pollutants, pharmaceutical compounds, and bacteria. However, its shortfall response to visible light, and the expeditious recombination rate of the photogenerated electron-hole pairs, hampers its utilization. Doping TiO₂ semiconductor with silver nanoparticles is a sound strategy to (1) extend its photocatalytic activity to visible light, (2) prevent the electron/holes pairs recombination due to the formation of the Schottky barrier at the interfaces with TiO₂ that act as an electron-trapping center, and (3) enhance its bactericide performances. This review focuses on the recent progress on silver-doped titanium dioxide (Ag/TiO₂)-based photocatalysts. It addresses a wide range of Ag/TiO₂ synthesis techniques, their physicochemical properties and discusses thoroughly the important role of silver (Ag) nanoparticles in enhancing the removal capacity and antibacterial performances of the Ag/TiO₂ photocatalysts.

Emerging Trends in Nanomaterials for Antibacterial Applications

Around the globe, surges of bacterial diseases are causing serious health threats and related concerns. Recently, the metal ion release and photodynamic and photothermal effects of nanomaterials were demonstrated to have substantial efficiency in eliminating resistance and surges of bacteria. Nanomaterials with characteristics such as surface plasmonic resonance, photocatalysis, structural complexities, and optical features have been utilized to control metal ion release, generate reactive oxygen species, and produce heat for antibacterial applications. The superior characteristics of nanomaterials present an opportunity to explore and enhance their antibacterial activities leading to clinical applications. In this review, we comprehensively list three different antibacterial mechanisms of metal ion release, photodynamic therapy, and photothermal therapy based on nanomaterials. These three different antibacterial mechanisms are divided into their respective subgroups in accordance with recent achievements, showcasing prospective challenges and opportunities in clinical, environmental, and related fields.

Critical review of photocatalytic disinfection of bacteria: from noble metals- and carbon nanomaterials-TiO2 composites to challenges of water characteristics and strategic solutions

This critical review covers ways to improve TiO₂-based photocatalysts, how water characteristics may affect photocatalytic disinfection, and strategies to tackle the challenges arising from water characteristics. Photocatalysis has shown much promise in the disinfection of water/wastewater, because photocatalysis does not produce toxic by-products, and is driven by green solar energy. There are however several drawbacks that are curbing the prevalence of photocatalytic disinfection applications: one, the efficiency of photocatalysts may limit popular utilization; two, the water characteristics may present some challenges to the process. TiO₂-based photocatalysts may be readily improved if composited with noble metals or carbon nanomaterials. Noble metals give TiO₂-based composites a higher affinity for dissolved oxygen, and induce plasmonic and Schottky effects in the TiO₂; carbon nanomaterials with a tunable structure, on the other hand, give the composites an improved charge carrier separation performance. Other than photocatalyst materials, the characteristics of water/wastewater is another crucial factor in the photocatalysis process. Also examined in this review are the crucial impacts that water characteristics have on photocatalysts and their interaction with bacteria. Accordingly, strategies to address the challenge of water characteristics on photocatalytic disinfection are explored: one, to modify the semiconductor conduction band to generate long-lifetime reactive species; two, to improve the interaction between bacteria and photocatalysts.

Cold atmospheric plasma as an interface biotechnology for enhancing surgical implants

Cold atmospheric plasma (CAP) has been intensively researched for direct treatment of living cells and tissues. Significant attention is now being given to its indirect applications in plasma medicine. Surgical implant is an exemplary conveyor to deliver the therapeutic effects of plasma to patients. There is a constant drive to enhance the clinical performance of surgical implants, targeting at the implant-tissue interface. As a versatile and potent tool, CAP is capable of ameliorating surgical implants using various strategies of interface biotechnology, such as surface modification, coating deposition, and drug delivery. Understanding the chemical, physical, mechanical, electrical, and pharmacological processes occurring at the implant-tissue interface is crucial to effective application of CAP as an interface biotechnology. This preclinical review focuses on the recent advances in CAP-assisted implant-based therapy for major surgical specialties. The ultimate goal here is to elicit unique opportunities and challenges for translating implant science to plasma medicine.

Photocatalytic and antimicrobial multifunctional nanocomposite membranes for emerging pollutants water treatment applications

Emerging pollutants represent a new global problem for water quality. As these compounds get into the environment, they cause severe threats to aquatic environments and human health and are typically resistant to conventional wastewater treatments. In this work, TiO₂ nanoparticles surface was functionalized with silver (Ag) nanoparticles, and solvent cast and electrospun membranes of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) were prepared with different concentrations of TiO₂ and Ag-TiO₂ to produce a multifunctional material. The photocatalytic activity of the nanocomposites was evaluated through the degradation of norfloxacin under ultraviolet (UV) and visible radiation. It is shown that nanocomposites with Ag-TiO₂ show the highest degradation efficiencies: 64.2% under UV and 80.7% under visible radiation, for 90 and 300 min, respectively. Furthermore, the recyclability of the membranes has also been demonstrated. Finally, it is shown the antimicrobial activity of the nanocomposite membranes, demonstrating the suitability of the Ag-TiO₂/PVDF-HFP nanocomposites as multifunctional photocatalytic and antimicrobial membranes for water remediation applications.

Synergistic degradation of acid orange 7 dye by using non-thermal plasma and g-C3N4/TiO2: Performance, degradation pathways and catalytic mechanism

In order to harness the full capability of ultraviolet and visible light in the dielectric barrier discharge induced non-thermal plasma (DBD-NTP) process, g-C₃N₄/TiO₂ catalysts were prepared and utilized in this process. Synergistic degradation of acid orange 7 (AO7) dye by DBD-NTP and g-C₃N₄/TiO₂ was conducted, and the performance, degradation pathways and synergistic catalytic mechanism were investigated. The results showed that the degradation rate of AO7 in the DBD-NTP and g-C₃N₄-15/TiO₂ process increased by 39.1% compared with that in the single DBD-NTP process at 12 min discharge time. At 20 W input power, initial concentration of AO7 was 5 mg/L, catalytic dosage was 0.5 g/L, initial pH value was 10.0 and air flow rate was 52 L/h, the degradation rate of AO7 reached 100.0% after 12 min discharge time. Higher discharge power and initial concentration of AO7 inhibited AO7 degradation, whereas increasing the air flow rate and initial pH value of the solution promoted AO7 degradation. The degradation pathways of AO7 consisted of azo structure destruction, ring opening reaction, hydroxylation, carboxylation and mineralization reaction. The results of radical trapping experiment showed that O₂^-, h⁺, OH, O₃ and H₂O₂ were the main reactive species for AO7 degradation in the DBD-NTP and g-C₃N₄-15/TiO₂ process. The Z-scheme photocatalytic mechanism for the g-C₃N₄/TiO₂ catalyst was proposed.

A Mini-Review on Anion Exchange and Chelating Polymers for Applications in Hydrometallurgy, Environmental Protection, and Biomedicine

The rapidly increasing demand for technologies aiming to resolve challenges of separations and environmental protection causes a sharp increase in the demand for ion exchange (IX) and chelating polymers. These unique materials can offer target-selective adsorption properties vital for the removal or recovery of harmful and precious materials, where trace concentrations thereof make other techniques insufficient. Hence, recent achievements in syntheses of IX and chelating resins designed and developed in our research group are discussed within this mini-review. The aim of the present work is to reveal that, due to the diversified and unique physiochemical characteristics of the proposed materials, they are not limited to traditional separation techniques and could be used in multifunctional areas of applications, including catalysis, heat management, and biomedicine.

Antibacterial, Antibiofilm, Antiquorum Sensing, Antimotility, and Antioxidant Activities of Green Fabricated Ag, Cu, TiO2, ZnO, and Fe3O4 NPs via Protoparmeliopsis muralis Lichen Aqueous Extract against Multi-Drug-Resistant Bacteria

Consideration of lichen organisms as the ecofriendly source of metal nanoparticles (MNPs) and metal oxide NPs (MONPs) synthesis is seldom. In this study, Ag and Cu MNPs as well as TiO₂, ZnO, and Fe₃O₄ MONPs were green synthesized by Protoparmeliopsis muralis lichen aqueous extract. First, physicochemical characterization by UV-vis spectroscopy, XRD, FT-IR, FESEM, and TEM techniques demonstrated the presence possibility of secondary metabolites around formed MNPs/MONPs with different diameters and shapes (spherical, triangular, polyhedral, and cubic). The antibacterial, antibiofilm, antiquorum sensing, and antioxidant abilities of these MNPs/MONPs against multi drug resistant (MDR) bacterium (Staphylococcus aureus ATCC 43300) and reference bacteria (Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853) were then evaluated by in vitro tests. Results of disc diffusion and MIC/MBC assays of Ag NPs as an effective antibacterial agent illustrated a higher sensitivity of the P. aeruginosa pathogen than E. coli and S. aureus. In next steps, a significant reduction was observed in the biofilm formation of each bacterium and pyocyanin synthesis by P. aeruginosa under Ag NPs. This investigation presents novel clean production of five MNPs/MONPs with prominent advantages of being ecofriendly and cost-effective and having antipathogen properties.