Preparation and characterization of ketoprofen-loaded solid lipid nanoparticles made from beeswax and carnauba wax

Preparation, physicochemical characterization, ex vivo, and in vivo evaluations of asiatic acid-loaded solid lipid nanoparticles formulated with natural waxes for nose-to-brain delivery

Asiatic acid (AA) has neuroprotective potential for prevention and treatment of Alzheimer's disease. Natural waxes with various ratios of Tween 80 and Span 80 or soybean lecithin were formulated to obtain AA-loaded solid lipid nanoparticles (AA-SLN) to improve direct nose to brain transport. Optimal AA-SLN had particle size below 200 nm with uniform size distribution and zeta potential of nearly -30 mV indicating a low risk of particle aggregation. Formulation with rice bran wax, Tween 80, and soybean lecithin (AA-RwS100) showed the highest entrapment efficiency and yield of >98 % while in vitro AA release of AA-SLN was linearly up to 48 h For ex vivo permeation, confocal laser scanning microscopy (CLSM) and histopathological studies on porcine olfactory mucosa (OM) and respiratory mucosa (RM), AA-SLN showed significantly higher permeation across OM than RM (p < 0.05) up to 6 h and AA-RwS100 also showed the highest amount of drug permeated as confirmed by CLSM results. Although AA-SLN showed non-significantly lower permeation than AA solution (AA-SOL) (p > 0.05), no epithelial and mucosal structure damages were observed in OM treated with AA-RwS100 and RM treated with all AA-SLNs indicating safety for nasal administration while AA-SOL showed significant damage to both OM and RM. In addition, in vivo brain distribution study by fluorescence imaging using Rhodamine (R6g) showed higher brain distribution after intranasal administration of R6g-loaded solid lipid nanoparticles (R6g-SLN) than R6g solution (R6g-SOL) and intravenous administration of R6g-SLN, and R6g-RwS100 also showed the highest brain accumulation at 8 h post administration.

Evaluation of anti-Toxoplasma effects of solid lipid nanoparticles carrying Cinnamon zeylanicum and Moringa oleifera oil extracts

BACKGROUND

The fabrication of anti-Toxoplasma drugs with less side effects and desirable efficacy is one of the important research goals facing with toxoplasmosis. This study aimed to determine the anti-Toxoplasma effects of Cinnamon zeylanicum (CZ), Moringa oleifera (MO) oil encapsulated into solid lipid nanoparticles (SLNs).

METHODS

Vero cells were cultured with serial concentrations (1 mg/mL to 100 µg/mL) of CZ-SLNs and MO-SLNs in DMEM culture medium. The morphological, physical, and chemical features of nanoparticles were calculated. The cell viability assays and anti-T. gondii effects of CZ-SLNs and MO-SLNs were evaluated. The CC50 and IC50 indices of SLNs-enveloped extracts were calculated.

RESULTS

The particle sizes of MO-SLNs and CZ-SLNs were 411.5 and 365 nm, while PDI indices were 0.53 and 0.7, respectively. Transmission electron microscopy (TEM) showed that both MO-SLNs and CZ-SLNs were smoothed spherical nanoparticles with rounded edges. The cytotoxicity assay showed the CC50 value of MO-SLNs at concentrations of ˃10 mg/mL. In addition, 60% of T. gondii-infected Vero cells remained alive at the concentrations ≤ 1 mg/ml, while the MO-SLNs killed at least 90% of T. gondii tachyzoites with an IC50 > 1 µg/ml. The cytotoxicity of CZ-SLNs extract showed the CC50 at the concentration 0.1 mg/mL. More than 50% of Vero cells, infected with T. gondii tachyzoites, survived at a concentration less than 0.1 mg/mL (IC50 ˂ 0.1 mg/mL), while the CZ-SLNs killed at least 85% of T. gondii tachyzoites in all concentrations.

CONCLUSION

The current results represented that the use of SLNs as a nano-carrier for M. oleifera and C. zeylanicum could kill T. gondii tachyzoites with low cytotoxicity, suggesting the effectiveness of these nano-emulsions along with the chemical agents in the treatment of Toxoplasma.

Preparation and characterisation of esculetin-loaded nanostructured lipid carriers gels for topical treatment of UV-induced psoriasis

SIGNIFICANCE

As an inflammatory and autoimmune skin condition, psoriasis affects 2-3% of people worldwide. Psoriasis requires prolonged treatments with immunosuppressive medications which have severe adverse effects. Esculetin (Esc) is a natural medication that has been utilised to treat psoriasis.

OBJECTIVE

The goal of this work is to improve Esc's solubility by developing novel Esc nanostructured lipid carriers (NLCs) for treating psoriasis and increasing the residence time on the skin which infers better skin absorption.

METHODS

The particle size, zeta potential and entrapment efficiency (EE) of Esc NLCs were assessed. Incorporating NLCs into gum Arabic gel preparation enhances their industrial applicability, absorption and residence time on the skin. Esc NLC gels were evaluated by in vitro release and in vivo effectiveness on a rat model of UV-induced psoriasis.

RESULTS

Esc NLCs showed high EE reaching more than 95% and reasonable particle size ranging between (53.86 ± 0.38 to 236.3 ± 0.11 nm) and were spherical. The release study of Esc NLCs gel demonstrated a fast release of Esc denoting enhanced bioavailability. Compared to free Esc, Esc NLCs gel (F2) could considerably lower the level of CD34 and TNF-α in the skin. The results were validated through histopathological analysis.

CONCLUSION

As Esc NLCs gel (F2) has strong anti-inflammatory properties, our results showed that it presented a significant potential for healing psoriasis.

Tailoring Core-Shell Metal Coordination for Smart Seed Coatings in Sustainable Agriculture

The international agriculture and food security sector is grappling with challenges like low crop yields, soil health deficiencies, and inefficient agrochemical use. The application of smart nanotechnology in agriculture, particularly surface functionalization, holds promise but has limited implementation. Engineered nanomaterials used as seed treatments, known as nanopriming, offer a simple technology to improve crop yield and stress tolerance. In this study, a multicomponent platform called Phelm (Phenolic network with a lipid core and metal coordinated shell) is proposed for encapsulating a commercial plant growth regulator, indole-3 acetic acid (IAA). Phelm comprises a hydrophobic solid lipid core, loaded with IAA, and an outer metal coordinated phenolic shell of tannic acid (TA) and Fe3+. The platform aims to treat seeds with encapsulated IAA, which can be controllably released, as well as protect the germination process at high salt concentrations. Phelm showed a remarkable increase in growth parameters of wheat seeds up to 58.6%, despite being irrigated with high concentrations of saltwater (100 mM). These findings suggest that nanopriming of seeds can effectively increase their efficacy even under abiotic stress conditions, which can drastically improve crop yields. Moreover, we envisage that the Phelm core/shell assembly can encapsulate a wide range of agrochemicals and biostimulants to promote sustainable and smart agricultural practices.

Myrtenol-Loaded Fatty Acid Nanocarriers Protect Rat Brains Against Ischemia-Reperfusion Injury: Antioxidant and Anti-Inflammatory Effects

This research investigated the preventive effects of myrtenol (MYR), fatty acid nanocarriers (FANC), and myrtenol-loaded FANC (MYR + FANC) on neurological disturbance, stroke volume, the levels of malondialdehyde (MDA), superoxide dismutase (SOD), and tumor necrosis factor-alpha (TNF-α) in the brain with ischemia-reperfusion injuries induced by middle cerebral artery occlusion (MCAO) in rats. Seventy two Wistar male rats were divided into six main groups. The groups were sham, ischemia-reperfusion group (MACO), MACO-MYR (50 mg/kg), MACO-FANC (50 and 100 mg/kg), and MACO-MYR + FANC (50 mg/kg). Stroke volume, neurological deficit scores, and the brain levels of MDA, SOD, and TNF-α were examined with TTC staining, observation, and ELISA, respectively. Pretreatment with MYR, FANC (100 mg/kg), and MYR + FANC reduced the neurological deficit score and cerebral infarction volume. MYR, FANC (100 mg/kg), and MYR + FANC pretreatment increased and decreased brain SOD and MDA levels compared to MACO group, respectively. The TNF-α level decreased in the MYR + FANC group compared to MCAO and MCAO-MYR groups in the brain. The use of FANC (100 mg/kg), MYR, and MYR + FANC has protective effects against oxidative stress and ischemia-reperfusion injury. FANC probably improve the bioavailability of MYR, as MYR+ FANC had more therapeutic effects on the reduction of ischemia-reperfusion injuries, inflammation, and oxidative stress.

Lipid-Based Nanoparticles as Oral Drug Delivery Systems: Overcoming Poor Gastrointestinal Absorption and Enhancing Bioavailability of Peptide and Protein Therapeutics

Delivery and formulation of oral peptide and protein therapeutics have always been a challenge for the pharmaceutical industry. The oral bioavailability of peptide and protein therapeutics mainly relies on their gastrointestinal solubility and permeability which are affected by their poor membrane penetration, high molecular weight and proteolytic (chemical and enzymatic) degradation resulting in limited delivery and therapeutic efficacy. The present review article highlights the challenges and limitations of oral delivery of peptide and protein therapeutics focusing on the application, potential and importance of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) as lipid-based drug delivery systems (LBDDSs) and their advantages and drawbacks. LBDDSs, due to their lipid-based matrix can encapsulate both lipophilic and hydrophilic drugs, and by reducing the first-pass effect and avoiding proteolytic degradation offer improved drug stability, dissolution rate, absorption, bioavailability and controlled drug release. Furthermore, their small size, high surface area and surface modification increase their mucosal adhesion, tissue-targeted distribution, physiological function and half-life. Properties such as simple preparation, high-scale manufacturing, biodegradability, biocompatibility, prolonged half-life, lower toxicity, lower adverse effects, lipid-based structure, higher drug encapsulation rate and various drug release profile compared to other similar carrier systems makes LBDDSs a promising drug delivery system (DDS). Nevertheless, undesired physicochemical features of peptide and protein drug development and discovery such as plasma stability, membrane permeability and circulation half-life remain a serious challenge which should be addressed in future.

Natural-Origin Betaine Surfactants as Promising Components for the Stabilization of Lipid Carriers

In the present work, we demonstrate studies involving the influence of the formulation composition on the physicochemical properties of nanocarriers: solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs). Novel lipid-origin platforms were prepared using two "green" betaine-based surfactants, cocamidopropyl betaine (ROKAmina K30) and coco betaine (ROKAmina K30B), in combination with three different solid lipids, cetyl palmitate (CRODAMOL CP), trimyristin (Dynasan 114), and tristearin (Dynasan 118). Extensive optimization studies included the selection of the most appropriate lipid and surfactant concentration for effective SLN and NLC stabilization. The control parameters involving the hydrodynamic diameters of the obtained nanocarriers along with the size distribution (polydispersity index) were determined by dynamic light scattering (DLS), while shape and morphology were evaluated by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Electrophoretic light scattering (ELS) and turbidimetric method (backscattering profiles) were used to assess colloidal stability. The studied results revealed that both betaine-stabilized SLN and NLC formulations containing CRODAMOL CP as lipid matrix are the most monodisperse and colloidally stable regardless of the other components and their concentrations used, indicating them as the most promising candidates for drug delivery nanosystems with a diverse range of potential uses.

Development of solid lipid nanoparticles-loaded drugs in parasitic diseases

Parasites cause illnesses with broad spectrum of symptoms from mild to severe, and are responsible for a significant number of outbreaks in the world. Current anti-parasitic drugs are toxic and have significant side effects. Nano-carriers are believed to obviate the limitations of conventional drugs via decreasing side effects and increasing target delivery and drug permeability with a controlled prolonged release of a drug. Solid lipid nanoparticles (SLNs) are lipid nanoparticles (LNPs), which have frequently been practiced. Suitable release rate, stability, and target delivery make SLNs a good alternative for colloidal carriers. SLNs are supposed to have great potential to deliver natural products with anti-parasitic properties. Nanoparticles have employed to improve stability and capacity loading of SLNs, during recent years. This review describes development of SLNs, the methods of preparation, characterization, and loaded drugs into SLNs in parasitic diseases. In addition, we summarize recent development in anti-parasitic SLNs-loaded drugs.

Enhancing Oral Bioavailability of Domperidone Maleate: Formulation, In vitro Permeability Evaluation In-caco-2 Cell Monolayers and In situ Rat Intestinal Permeability Studies

BACKGROUND

The domperidone maleate, a lipophilic agent classified as a Biopharmaceutical Classification System Class II substance with weak water solubility. Self- Emulsifying Drug Delivery System is a novel approach to improve water solubility and, ultimately bioavailability of drugs.

OBJECTIVE

This study aimed to develop and characterize new domperidone-loaded self-emulsifying drug delivery systems as an alternative formulation and to evaluate the permeability of domperidone-loaded self-emulsifying drug delivery systems by using Caco-2 cells and via single-pass intestinal perfusion method.

METHODS

Three self-emulsifying drug delivery systems were prepared and characterized in terms of pH, viscosity, droplet size, zeta potential, polydispersity index, conductivity, etc. Each formulation underwent 10, 100, 200, and 500 times dilution in intestinal buffer pH 6.8 and stomach buffer pH 1.2, respectively. Female Sprague Dawley rats were employed for in situ single-pass intestinal perfusion investigations.

RESULTS

Results of the study revealed that the ideal self-emulsifying drug delivery systems formulation showed narrow droplet size, ideal zeta potential, and no conductivity. Additionally, as compared to the control groups, the optimum formulation had better apparent permeability (12.74 ± 0.02×10-4) from Caco-2 cell monolayer permeability experiments. The study also revealed greater Peff values (2.122 ± 0.892×10-4 cm/s) for the optimal formulation from in situ intestinal perfusion analyses in comparison to control groups (Domperidone; 0.802 ± 0.418×10-4 cm/s).

CONCLUSION

To conclude, prepared formulations can be a promising way of oral administration of Biopharmaceutical Classification System Class II drugs.

Transferosomes as a transdermal drug delivery system: Dermal kinetics and recent developments

The development of innovative approaches to deliver medications has been growing now for the last few decades and generates a growing interest in the dermatopharmaceutical field. Transdermal drug delivery in particular, remains an attractive alternative route for many therapeutics. However, due to the limitations posed by the barrier properties of the stratum corneum, the delivery of many pharmaceutical dosage forms remains a challenge. Most successful therapies using the transdermal route have been ones containing smaller lipophilic molecules with molecular weights of a few hundred Daltons. To overcome these limitations of size and lipophilicity of the drugs, transferosomes have emerged as a successful tool for transdermal delivery of a variety of therapeutics including hydrophilic actives, larger molecules, peptides, proteins, and nucleic acids. Transferosomes exhibit a flexible structure and higher surface hydrophilicity which both play a critical role in the transport of drugs and other solutes using hydration gradients as a driving force to deliver the molecules into and across the skin. This results in enhanced overall permeation as well as controlled release of the drug in the skin layers. Additionally, the physical-chemical properties of the transferosomes provide increased stability by preventing degradation of the actives by oxidation, light, and temperature. Here, we present the history of transferosomes from solid lipid nanoparticles and liposomes, their physical-chemical properties, dermal kinetics, and their recent advances as marketed dosage forms. This article is categorized under: Biology-Inspired Nanomaterials > Lipid-Based Structures Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Enhanced stability and skin permeation of ibuprofen-loaded solid lipid nanoparticles based binary solid lipid matrix: Effect of surfactant and lipid compositions

Hypothesis

The type of emulsifier selected has an impact on the physicochemical properties of solid lipid nanoparticles (SLNs). This study was designed to compare the effects of emulsifiers on the physicochemical properties and in vitro skin performance of SLNs prepared from a binary mixture of Softisan® 378 (S378) and cetyl palmitate (CP) to those of SLNs prepared from only CP and S378.

Experiments

SLNs were prepared from CP, S378, or a binary mixture of CP and S378 (1:1 w/w) as the lipid phase and stabilized with Tego®Care 450 (TG450) or poloxamer 188 (P188) containing 1.0% w/w ibuprofen loading. The physicochemical properties including the particle size, polydispersity index (PDI), zeta potential (ZP), encapsulation efficiency (E.E.), crystallinity (%CI), and polymorphism were determined after production and after storage for 180 days under different conditions. In addition, in vitro drug release and permeation through human skin was studied after production and storage at room temperature for 180 days.

Finding

The particle sizes of ibuprofen-loaded SLNs (IBSLNs) stabilized with P188 (IBSLN-P188) were smaller than those of SLNs stabilized with TG450 (IBSLN-TG450) (p < 0.05). After 180 days, the particle sizes of the IBSLNs were slightly increased compared to those at the initial time but were <250 nm. The IBSLN-TG450 sample showed a higher %CI than IBSLN-P188 prepared with similar propotions of CP and S378, and ibuprofen crystals were observed in the IBSLN1-TG450 sample after storage at 4 °C for 180 days. Based on the result of the in vitro release study and the in vitro skin permeation test, the addition of S378 into the CP-matrix modified ibuprofen release and skin permeation both permeated ibuprofen through the epidermis and retained ibuprofen in the epidermis. In addition, the storage time affected the release and skin permeation of ibuprofen from the SLNs, which depended on the composition of the IBSLNs.

Selected strategies to fight pathogenic bacteria

Natural products and analogues are a source of antibacterial drug discovery. Considering drug resistance levels emerging for antibiotics, identification of bacterial metalloenzymes and the synthesis of selective inhibitors are interesting for antibacterial agent development. Peptide nucleic acids are attractive antisense and antigene agents representing a novel strategy to target pathogens due to their unique mechanism of action. Antisense inhibition and development of antisense peptide nucleic acids is a new approach to antibacterial agents. Due to the increased resistance of biofilms to antibiotics, alternative therapeutic options are necessary. To develop antimicrobial strategies, optimised in vitro and in vivo models are needed. In vivo models to study biofilm-related respiratory infections, device-related infections: ventilator-associated pneumonia, tissue-related infections: chronic infection models based on alginate or agar beads, methods to battle biofilm-related infections are discussed. Drug delivery in case of antibacterials often is a serious issue therefore this review includes overview of drug delivery nanosystems.

Nitazoxanide and quercetin co-loaded nanotransfersomal gel for topical treatment of cutaneous leishmaniasis with macrophage targeting and enhanced anti-leishmanial effect

Purpose

Anti-leishmanial medications administered by oral and parenteral routes are less effective for treatment of cutaneous leishmaniasis (CL) and cause toxicity, hence targeted drug delivery is an efficient way to improve drug availability for CL with reduced toxicity. This study aimed to develop, characterize and evaluate nitazoxanide and quercetin co-loaded nanotransfersomal gel (NTZ-QUR-NTG) for the treatment of CL.

Methods

NTZ-QUR-NT were prepared by thin film hydration method and were statistically optimized using Box-Behnken design. To ease the topical delivery and enhance the retention time, the NTZ-QUR-NT were dispersed in 2 % chitosan gel. Moreover, in-vitro drug release, ex-vivo permeation, macrophage uptake, cytotoxicity and anti-leishmanial assays were performed.

Results

The optimized formulation indicated mean particle size 210 nm, poly dispersity index (PDI) 0.16, zeta potential (ZP) -15.1 mV and entrapment efficiency (EE) of NTZ and QUR was 88 % and 85 %, respectively. NTZ-QUR-NT and NTZ-QUR-NTG showed sustained release of the incorporated drugs as compared to the drug dispersions. Skin permeation of NTZ and QUR in NTZ-QUR-NTG was 4 times higher in comparison to the plain gels. The NTZ-QUR-NT cell internalization was almost 10-folds higher than NTZ-QUR dispersion. The cytotoxicity potential (CC50) of NTZ-QUR-NT (71.95 ± 3.32 μg/mL) was reduced as compared to NTZ-QUR dispersion (49.77 ± 2.15 μg/mL. A synergistic interaction was found between NTZ and QUR. Moreover, in-vitro anti-leishmanial assay presented a lower IC50 value of NTZ-QUR-NT as compared to NTZ-QUR dispersion. Additionally, a significantly reduced lesion size was observed in NTZ-QUR-NTG treated BALB/c mice, indicating its antileishmanial potential.

Conclusion

It can be concluded that nanotransfersomal gel has the capability to retain and permeate the incorporated drugs through stratum corneum and induce synergetic anti-leishmanial effect of NTZ and QUR against cutaneous leishmaniasis.

Polymer-lipid hybrid nanoparticles as potential lipophilic anticancer drug carriers

Nanocarrier systems are widely used for drug delivery applications, but limitations such as the use of synthetic surfactants, leakage of toxic drugs, and a poor encapsulation capacity remain as challenges. We present a new hybrid nanocarrier system that utilizes natural materials to overcome these limitations and improve the safety and efficacy of drug delivery. The system comprises a biopolymeric shell and a lipid core, encapsulating the lipophilic anticancer drug paclitaxel. Bovine serum albumin and dextran, in various molecular weights, are covalently conjugated via Maillard reaction to form the shell which serves as a stabilizer to maintain nanoparticle integrity. The properties of the system, such as Maillard conjugate concentration, protein/polysaccharide molar ratio, and polysaccharide molecular weight, are optimized to enhance nanoparticle size and stability. The system shows high stability at different pH conditions, high drug loading capacity, and effective in vitro drug release through the trigger of enzymes and passive diffusion. Serine proteases are used to digest the protein portion of the nanoparticle shell to enhance the drug release. This nanocarrier system represents a significant advancement in the field of nanomedicine, offering a safe and effective alternative for the delivery of lipophilic drugs.

Topical caffeine-loaded nanostructured lipid carriers for enhanced treatment of cellulite: A 32 full factorial design optimization and in vivo evaluation in rats

The goal of this study was the development and evaluation of semisolid caffeine (CAF) loaded nanostructured lipid carriers (NLCs) for topical treatment of cellulite. CAF-loaded NLC formulations were prepared via high-speed homogenization followed by ultrasonication. A 32 full factorial design was employed for formulation optimization. The total lipid content (%) and the liquid lipid content per total lipids (%) were chosen as factors, whereas particle size (PS), polydispersity index (PDI), zeta potential (|ZP|) and viscosity (VIS) were selected as responses. The design suggested CAF-NLC3 as the optimum formulation consisting of a total lipid content of 15% w/w (palmitic acid and soft paraffin/isopropyl myristate, 7:3 w/w) and a surfactant content of 10% w/w (Tween 80/lecithin, 8:1.2 w/w). CAF-NLC3 revealed PS, PDI, ZP, VIS and CAF content values of 318.8 nm, 0.253, -41.1 mV, 18.0 Pa.s and 97.57%, respectively. It showed a pseudoplastic rheological behavior, acceptable pH value (5.25), good spreadability (1.12 mm2/g) and spherical shape employing transmission electron microscopy. Differential scanning calorimetry and X-ray diffraction demonstrated the amorphization of CAF in CAF-NLC3. CAF-NLC3 remained stable for 3 months at room and refrigeration conditions. A single topical application of CAF-NLC3 on shaved abdominal skins of Wistar rats revealed enhanced skin retention of CAF by 2-fold and 1.4-fold after 4 h when compared with plain CAF gel (CAF-P) and marketed CAF gel (CAF-M), respectively. Furthermore, CAF-NLC3 exhibited a superior anti-cellulite activity in comparison with CAF-P and CAF-M through elevating extracellular matrix components (collagen 1, elastin and hyaluronic acid) and stimulating the brown adipose tissue thermogenesis via up-regulating UCP1 and PPAR-γ expression. In addition, CAF-NLC3 prominently increased lipolysis through HSL activity and decreased pro-inflammatory cytokines such as ICAM-1 and VCAM-1 after 30 days of treatment on a high fat diet-induced cellulite rat model. These findings were further confirmed by histopathological examination supported by morphometric analysis. Therefore, incorporation of CAF in a semisolid NLC formulation would be a promising cosmetic approach for the topical treatment of cellulite.

Effect of nanostructure lipid carrier of methylene blue and monoterpenes as enzymes inhibitor for Culex pipiens

Solid lipid nanoparticles second generation, nanostructure lipid carrier (NLC), is one of the most important biodegradable nanoparticles. Nanostructure Lipid carrier (NLC) was used to encapsulate methylene blue (MB) dye, carvacrol and citronellal and their efficacy as insecticidal against Culex pipiens (Cx. pipiens) were distinguished. The prepared nanoformulation revealed very good physicochemical properties, especially the homogeneity of the particle size. Transmission electron microscope showed spherical shaped nanoparticles within range less than 200 nm. The prepared NLC-MB-MT system showed a very competitive insecticidal activity and high virulence against the mosquito larvae with higher mortality rate of LC50 of 0.141 µl/mL, in addition to high level of Oxidative stress parameters obtained through all the tested enzymes including hydrogen peroxide (4.8 ppm), protein carbonyl amount (0.12 OD/mg protein), ascorbic acid (0.15 mg) and Superoxide dismutase (SOD) showed strong increasing (0.09 OD/mg protein/min) at 6 µg/mL, respectively. Whereas paradoxical results of the oxidative stress enzymes were obtained from different concentration of nanoformulation that introduce a convenient reason for their potential insecticidal effect. The cytotoxic effect of NLC-MB-MT was evaluated using WI38 human lung cell lines, the LC50 was 6.4 mg/mL. The low cytotoxic reactivity towards the tested cell line makes the NLC-MB-MT nanoformulation has its promising insecticidal efficacy. Molecular docking study for each component were done against acetylcholine esterase protein and accepted binding modes achieved by the three compounds.

Assessment of formulation variables of poor water soluble diacerein for its improved loading and anti-inflammatory activity

Dissolving microneedles have become a popular method for percutaneous administrationof drugs. However, loading poorly soluble drugs into water-based dissolving microneedles remains a challenge. In view of this, we aimed to improve Diacerein (DCN) solubility formulating dissolving microneedles. DCN microsuspension was created by high-speed homogenization with organic solvents or wet milling with Tween 80 as a stabilizer (LD1). They were analyzed for particle size and saturation solubility. Subsequently, the organic solvent-based microneedles were prepared under vacuum, whereas LD1 was mixed with HPMC (8% w/w) and PVP (30% w/w) matrix to concentrate the drug in acral fraction through centrifugation. DCN microsuspension in DMSO had the highest drug solubility with an average particle size of 6 µm, whereas LD1 had a particle size of 3.28 µm showing improved solubility. TD-3 had the highest drug loading and the least amount of drug migration into the blank baseplate. Within 5 min, these microneedles dissolved completely in an agarose-gel block. LD1 was likewise put in the baseplate to generate TD3-B. Within 24 h, 74.39% of the medication was released from TD3-B, with only a small amount remaining in the baseplate. TLC examination indicated the conversion of DCN to Rhein in the skin, whereas DSC and TGA studies revealed amorphous features. DCN microneedles showed no sign of skin irritancy but showed anti-inflammatory response on carrageenan-induced paw edema model. Microneedles remained stable during accelerated stability testing. Wet milling in the presence of a stabilizer can be an effective approach for enhancing DCN solubility for improved drug loading in dissolving microneedles. Improvement in solubility of Diacerein for subsequent loading in Dissolving Microneedle for percutaneous delivery.

The Fundamental Role of Lipids in Polymeric Nanoparticles: Dermal Delivery and Anti-Inflammatory Activity of Cannabidiol

This report presents a nanoparticulate platform for cannabidiol (CBD) for topical treatment of inflammatory conditions. We have previously shown that stabilizing lipids improve the encapsulation of CBD in ethyl cellulose nanoparticles. In this study, we examined CBD release, skin permeation, and the capability of lipid-stabilized nanoparticles (LSNs) to suppress the release of IL-6 and IL-8. The nanoparticles were stabilized with cetyl alcohol (CA), stearic acid (SA), lauric acid (LA), and an SA/LA eutectic combination (SALA). LSN size and concentration were measured and characterized by differential scanning calorimetry (DSC), in vitro release of loaded CBD, and skin permeability. IL-6 and IL-8 secretions from TNF-α-induced HaCaT cells were monitored following different LSN treatments. CBD released from the LSNs in dispersion at increasing concentrations of polysorbate 80 showed non-linear solubilization, which was explained by recurrent precipitation. A significant high release of CBD in a cell culture medium was shown from SALA-stabilized nanoparticles. Skin permeation was >30% lower from SA-stabilized nanoparticles compared to the other LSNs. Investigation of the CBD-loaded LSNs' effect on the release of IL-6 and IL-8 from TNF-α-induced HaCaT cells showed that nanoparticles stabilized with CA, LA, or SALA were similarly effective in suppressing cytokine release. The applicability of the CBD-loaded LSNs to treat topical inflammatory conditions has been supported by their dermal permeation and release inhibition of pro-inflammatory cytokines.

Tailoring Apixaban in Nanostructured Lipid Carrier Enhancing Its Oral Bioavailability and Anticoagulant Activity

Apixaban (Apx), an oral anticoagulant drug, is a direct factor Xa inhibitor for the prophylaxis against venous thromboembolism. Apx has limited oral bioavailability and poor water solubility. The goal of this study was to improve the formulation of an Apx-loaded nanostructured lipid carrier (NLC) to increase its bioavailability and effectiveness. As solid lipid, liquid lipid, hydrophilic, and lipophilic stabilizers, stearic acid, oleic acid, Tween 80, and lecithin were used, respectively. Utilizing Box-Behnken design, the effects of three factors on NLC particle size (Y1), zeta potential (Y2), and entrapment efficiency percent (Y3) were examined and optimized. The optimized formula was prepared, characterized, morphologically studied, and pharmacokinetically and pharmacodynamically assessed. The observed responses of the optimized Apx formula were 315.2 nm, -43.4 mV, and 89.84% for Y1, Y2, and Y3, respectively. Electron microscopy revealed the homogenous spherical shape of the NLC particles. The in vivo pharmacokinetic study conducted in male Wistar rats displayed an increase in AUC and Cmax by 8 and 2.67 folds, respectively, compared to oral Apx suspension. Moreover, the half-life was increased by 1.94 folds, and clearance was diminished by about 8 folds, which makes the NLC formula a promising sustained release system. Interestingly, the pharmacodynamic results displayed the superior effect of the optimized formula over the drug suspension with prolongation in the cuticle bleeding time. Moreover, both prothrombin time and activated partial thromboplastin time are significantly increased. So, incorporating Apx in an NLC formula significantly enhanced its oral bioavailability and pharmacodynamic activity.

Enhancement of ketoprofen dissolution rate by the liquisolid technique: optimization and in vitro and in vivo investigations

The objective of the current study is to evaluate the prospective of liquisolid formulation to improve the dissolution rate of ketoprofen and thereby the bioavailability. Different batches of liquisolid were prepared using polyethylene glycol 200 as a solvent, microcrystalline cellulose, and aerosil 200 as carrier and coating material, respectively. Central composite design (3²) was utilized to examine the effects of independent variables (load factor and excipient ratio) on dependent variables (solubility and % in vitro drug release). Differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy techniques were employed for characterization of optimized batch (LS-10) of liquisolid formulation. The half-maximal inhibitory concentration (IC₅₀) values for in vitro anti-inflammatory activity for liquisolid formulation exhibited a higher anti-inflammatory effect than ketoprofen and physical mixture. The statistical analysis of in vivo (anti-inflammatory and analgesic) activities data demonstrated that the test (optimized formulation) treatment group resulted in quick pharmacological response in Wistar rats and Albino mice when compared with standard (pure drug) and control treatment groups. The results obtained in the present study illustrated that the liquisolid formulation could be a propitious approach to increase the bioavailability of ketoprofen and could be used in oral therapy.

Microencapsulation of DEET in Solid Lipid Microparticles: production, characterization and safety evaluation

DEET is considered the gold standard for insect repellent products. However, it behaves as a strong skin permeant. DEET was encapsulated in Solid Lipid Microparticles (SLM) and characterized in terms of morphology, particle size, cytotoxicity and ex vivo permeation. The particles exhibited micrometric size with a spherical shape. In addition, we developed and validated an analytical method for DEET quantification by high performance liquid chromatography (HPLC), which was selective, linear, precise, accurate and robust. The toxicity test in cell culture of keratinocytes, fibroblasts and macrophages showed that the formulation did not present cytotoxicity. The SLM were able to decrease the skin permeation of DEET in relation to the free active in ethanol with gain in the safe. Microparticles were able to increase the skin retention of DEET, which can contribute to extend the time of repellent action. The results showed that Solid Lipid Microparticles are safe and promising topical formulation to insect bite prevention.

Preparation, Characterization and Pharmacokinetics of Tolfenamic Acid-Loaded Solid Lipid Nanoparticles

The clinical use of nonsteroidal anti-inflammatory drugs is limited by their poor water solubility, unstable absorption, and low bioavailability. Solid lipid nanoparticles (SLNs) exhibit high biocompatibility and the ability to improve the bioavailability of drugs with low water solubility. Therefore, in this study, a tolfenamic acid solid lipid nanoparticle (TA-SLN) suspension was prepared by a hot melt–emulsification ultrasonication method to improve the sustained release and bioavailability of TA. The encapsulation efficiency (EE), loading capacity (LC), particle size, polydispersity index (PDI), and zeta potential of the TA-SLN suspension were 82.50 ± 0.63%, 25.13 ± 0.28%, 492 ± 6.51 nm, 0.309 ± 0.02 and −21.7 ± 0.51 mV, respectively. The TA-SLN suspension was characterized by dynamic light scattering (DLS), fluorescence microscopy (FM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared (FT-IR) spectroscopy. The TA-SLN suspension showed improved sustained drug release in vitro compared with the commercially available TA injection. After intramuscular administration to pigs (4 mg/kg), the TA-SLN suspension displayed increases in the pharmacokinetic parameters T_max, T_1/2, and MRT_0–∞ by 4.39-, 3.78-, and 3.78-fold, respectively, compared with TA injection, and showed a relative bioavailability of 185.33%. Thus, this prepared solid lipid nanosuspension is a promising new formulation.

Applications and perspectives of polyphenol-loaded solid lipid nanoparticles and nanostructured lipid carriers for foods

Imbalanced nutrition in modern society is one of the reasons for disorders, such as cancer, cardiovascular disease, and diabetes, which have attracted the interest in bioactives (particularly polyphenols) to assist in the balanced diet of modern people. Although stability can be maintained during preparation and storage, the ingested polyphenols undergo harsh gastrointestinal digestion processes, resulting in limited bioaccessibility and low gut-epithelial permeation and bioavailability. Several lipid-based formulations have been proposed to overcome these issues. Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) have also been highlighted as carrier systems for the oral delivery of lipophilic bioactives, including polyphenols. This paper summarizes the research on the ingredients, production methods, post-processing procedures, general characteristics, and advantages and disadvantages of SLNs and NLCs. Overall, this paper reviews the applications and perspectives of polyphenol-loaded SLNs and NLCs in foods, as well as their regulation, production, storage, and economic feasibility.

Stability and Applicability of Retinyl Palmitate Loaded Beeswax Microcapsules for Cosmetic Use : Material properties and stability of microencapsulated actives

In our previous study, retinyl palmitate was successfully encapsulated by melt dispersion using waxes as shell materials. Herein, the objective of the present research is to evaluate the shelf life and kinetic release of the developed microcapsules. The study was conducted by measuring actual loading capacity over a period of time using spectroscopic analysis. The transfer percentage of particles from nonwoven facial wipes to skin-like surfaces was also investigated by simulating the rubbing mechanism with a robotic transfer replicator. Although particles stored as powder form under room temperature showed only eight days of shelf-life, particles stored as a dispersion in a refrigerator maintained 60% of the theoretical loading capacity after one month. The kinetic release profile of the particles in ethanol with shaking at 100 rpm and 37±2°C showed an initial burst in the first half an hour, followed by a sustained release. It also showed that 98% of the retinyl palmitate content released within 4 h. Particles incorporated into wet nonwoven wipes gave approximately 22% transfer to skin-like fabric. Thus, the study shows potentials of delivering skincare properties by means of retinyl palmitate capsule loaded textile substrates.

Nanoemulsions Containing Megestrol Acetate: Development, Characterization, and Stability Evaluation

Many active pharmaceutical ingredients (API) are poorly soluble in water and their low oral bioavailability is a major hindrance to their potential use. Megestrol acetate (MGA) is insoluble in water and its oral absorption is limited and considerably affected by food. Nanoemulsions (NEs) can be used as effective oral drug delivery systems where the hydrophobic API is loaded into the oil phase. In this study, MGA-loaded NEs were prepared based on the spontaneous emulsification technique. The effects of different excipients such as ethanol, Tween 80, Lipoid E80, and medium-chain triglyceride (MCT) on the NEs characterization were investigated. The experimental results indicated that optimum MGA-loaded NEs (F20) were nanometer-sized droplets (166.9 ± 3.0 nm) with negative zeta potential (-12.2 ± 1.1 mV). The effect of polyvinylpyrrolidone (PVP) on characteristic properties of F20 was also evaluated. On the selected NEs, in vitro dissolution tests and stability studies in various mediums and storage conditions were performed. The encapsulation efficiency of NEs were > 99%. The overall droplet size of F20 and PVP-2 (PVP-coated NEs) remained relatively stable as the pH changed from 1.2 to 6.8. It was determined that F20 and PVP-2 remained stable at 4°C until 12 weeks and had higher cytotoxicity on MCF-7 cells. To conclude, droplet size, surface charge, and stability are important properties for NEs to have sufficient effectiveness. In this study, alternative oral NEs of low-solubility drug MGA were developed considering the above features.

Ketoprofen-FA Co-crystal: In Vitro and In Vivo Investigation for the Solubility Enhancement of Drug by Design of Expert

The present piece of research work is framed for improving the solubility of ketoprofen by forming co-crystal using fumaric acid as a coformer. Co-crystal of ketoprofen and fumaric acid was prepared by simple solvent-assisted grinding method, containing drug and coformer as independent variables and solubility and % drug release were assumed to be dependent variables. Differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, nuclear magnetic resonance and scanning electron microscopy techniques were used to characterize the preparation of optimized batch of co-crystal and further, evaluated for in vitro and in vivo anti-inflammatory and analgesic activities. Based on results of solubility and dissolution rate studies the formulation showed magnified improvement in both the properties on co-crystallization. The values of Gibbs free energy are negative at all levels of carrier demonstrating spontaneity of the drug solubilization process. The IC₅₀ value of optimized batch of co-crystal formulation and the pure drug was observed as 327.33 μg/ml and 556.11 μg/ml, respectively, demonstrating that co-crystal formulation possesses more percentage protection against protein denaturation than the drug ketoprofen. In vivo (anti-inflammatory and analgesic) activities revealed that optimized batch of co-crystal formulation delivered a rapid pharmacological response in Wistar rats and albino mice when compared with standard drug.

Physicochemical and biopharmaceutical aspects influencing skin permeation and role of SLN and NLC for skin drug delivery

The skin is a complex and multifunctional organ, in which the static versus dynamic balance is responsible for its constant adaptation to variations in the external environment that is continuously exposed. One of the most important functions of the skin is its ability to act as a protective barrier, against the entry of foreign substances and against the excessive loss of endogenous material. Human skin imposes physical, chemical and biological limitations on all types of permeating agents that can cross the epithelial barrier. For a molecule to be passively permeated through the skin, it must have properties, such as dimensions, molecular weight, pKa and hydrophilic-lipophilic gradient, appropriate to the anatomy and physiology of the skin. These requirements have limited the number of commercially available products for dermal and transdermal administration of drugs. To understand the mechanisms involved in the drug permeation process through the skin, the approach should be multidisciplinary in order to overcome biological and pharmacotechnical barriers. The study of the mechanisms involved in the permeation process, and the ways to control it, can make this route of drug administration cease to be a constant promise and become a reality. In this work, we address the physicochemical and biopharmaceutical aspects encountered in the pathway of drugs through the skin, and the potential added value of using solid lipid nanoparticles (SLN) and nanostructured lipid vectors (NLC) to drug permeation/penetration through this route. The technology and architecture for obtaining lipid nanoparticles are described in detail, namely the composition, production methods and the ability to release pharmacologically active substances, as well as the application of these systems in the vectorization of various pharmacologically active substances for dermal and transdermal applications. The characteristics of these systems in terms of dermal application are addressed, such as biocompatibility, occlusion, hydration, emollience and the penetration of pharmacologically active substances. The advantages of using these systems over conventional formulations are described and explored from a pharmaceutical point of view.

Antibody-Functionalized Carnauba Wax Nanoparticles to Target Breast Cancer Cells

Development of safer nanomedicines for drug delivery applications requires immense efforts to improve clinical outcomes. Targeting a specific cell, biocompatibility and biodegradability are vital properties of a nanoparticle to fulfill the safety criteria in medical applications. Herein, we fabricate antibody-functionalized carnauba wax nanoparticles encapsulated a hydrophobic drug mimetic, which is potentially interesting for clinical use due to the inert and nontoxic properties of natural waxes. The nanoparticles are synthesized applying miniemulsion methods by solidifying molten wax droplets and further evaporating the solvent from the dispersion. The pH-selective adsorption of antibodies (IgG1, immunoglobulin G1, and CD340, an antihuman HER2 antibody) onto the nanoparticle surface is performed for practical and effective functionalization, which assists to overcome the complexity in chemical modification of carnauba wax. The adsorption behavior of the antibodies is studied using isothermal titration calorimetry (ITC), which gives thermodynamic parameters including the enthalpy, association constant, and stoichiometry of the functionalization process. Both antibodies exhibit strong binding at pH 2.7. The CD340-decorated wax nanoparticles show specific cell interaction toward BT474 breast cancer cells and retain the targeting function even after 6 months of storage period.

Towards principled design of cancer nanomedicine to accelerate clinical translation

Nanotechnology in medical applications, especially in oncology as drug delivery systems, has recently shown promising results. However, although these advances have been promising in the pre-clinical stages, the clinical translation of this technology is challenging. To create drug delivery systems with increased treatment efficacy for clinical translation, the physicochemical characteristics of nanoparticles such as size, shape, elasticity (flexibility/rigidity), surface chemistry, and surface charge can be specified to optimize efficiency for a given application. Consequently, interdisciplinary researchers have focused on producing biocompatible materials, production technologies, or new formulations for efficient loading, and high stability. The effects of design parameters can be studied in vitro, in vivo, or using computational models, with the goal of understanding how they affect nanoparticle biophysics and their interactions with cells. The present review summarizes the advances and technologies in the production and design of cancer nanomedicines to achieve clinical translation and commercialization. We also highlight existing challenges and opportunities in the field.

Acetylated cashew gum and fucan for incorporation of lycopene rich extract from red guava (Psidium guajava L.) in nanostructured systems: Antioxidant and antitumor capacity

Industrial application of lycopene is limited due to its chemical instability and low bioavailability. This study proposes the development of fucan-coated acetylated cashew gum nanoparticles (NFGa) and acetylated cashew gum nanoparticles (NGa) for incorporation of the lycopene-rich extract from red guava (LEG). Size, polydispersity, zeta potential, nanoparticles concentration, encapsulation efficiency, transmission electron microscopy (TEM) and atomic force microscopy (AFM) were used to characterize nanoparticles. The antioxidant activity was determinated and cell viability was evaluated in the human breast cancer cells (MCF-7) and human keratinocytes (HaCaT) by MTT assay. The toxic effect was evaluated by hemolysis test and by Galleria mellonella model. NFGa showed higher stability than NGa, having a size of 162.10 ± 3.21 nm, polydispersity of 0.348 ± 0.019, zeta potential -30.70 ± 0.53 mV, concentration of 6.4 × 10⁹ nanoparticles/mL and 60% LEG encapsulation. Microscopic analysis revealed a spherical and smooth shape of NFGa. NFGa showed antioxidant capacity by ABTS method and ORAC assay. The NFGa presented significant cytotoxicity against MCF-7 from the lowest concentration tested (6.25-200 μg/mL) and did not affect the cell viability of the HaCaT. NFGa showed non-toxic effect in the in vitro and in vivo models. Therefore, NFGa may have a promising application in LEG stabilization for antioxidant and antitumor purposes.

Formulation and In-Vitro Characterization of pH-Responsive Semi-Interpenetrating Polymer Network Hydrogels for Controlled Release of Ketorolac Tromethamine

Ketorolac tromethamine is a non-steroidal anti-inflammatory drug used in the management of severe pain. The half-life of Ketorolac tromethamine is within the range of 2.5–4 h. Hence, repeated doses of Ketorolac tromethamine are needed in a day to maintain the therapeutic level. However, taking several doses of Ketorolac tromethamine in a day generates certain complications, such as acute renal failure and gastrointestinal ulceration. Therefore, a polymeric-controlled drug delivery system is needed that could prolong the release of Ketorolac tromethamine. Therefore, in the current study, pH-responsive carbopol 934/sodium polystyrene sulfonate-co-poly(acrylic acid) (CP/SpScPAA) hydrogels were developed by the free radical polymerization technique for the controlled release of Ketorolac tromethamine. Monomer acrylic acid was crosslinked with the polymers carbopol 934 and sodium polystyrene sulfonate by the cross-linker N’,N’-methylene bisacrylamide. Various studies were conducted to evaluate and assess the various parameters of the fabricated hydrogels. The compatibility of the constituents used in the preparation of hydrogels was confirmed by FTIR analysis, whereas the thermal stability of the unreacted polymers and developed hydrogels was analyzed by TGA and DSC, respectively. A smooth and porous surface was indicated by SEM. The crystallinity of carbopol 934, sodium polystyrene sulfonate, and the prepared hydrogels was evaluated by PXRD, which revealed a reduction in the crystallinity of reactants for the developed hydrogels. The pH sensitivity of the polymeric hydrogel networks was confirmed by dynamic swelling and in vitro release studies with two different pH media i.e., pH 1.2 and 7.4, respectively. Maximum swelling was exhibited at pH 7.4 compared to pH 1.2 and, likewise, a greater percent drug release was perceived at pH 7.4. Conclusively, we can demonstrate that the developed pH-sensitive hydrogel network could be employed as a suitable carrier for the controlled delivery of Ketorolac tromethamine.

Oleogel formulation using lipophilic sea buckthorn extract isolated from pomace with supercritical CO2

Lipophilic sea buckthorn pomace extract isolated by supercritical CO₂ (LSBPE) was structurized with different amounts of carnauba wax or beeswax as oleogelators. Oleogels were also made with added water at an LSBPE:water ratio of 70:30. LSBPE was characterized by a favorable ratio of omega-6 to omega-3 fatty acids (1:3) and reasonable amounts of omega-7 fatty acids (4.45% of total), tocopherols (63.0 mg/100 g) and carotenoids (700.1 mg/100 g). The oleogels were characterized by their structural and rheological properties, and physical and chemical stability during storage. Carnauba wax produced a gel-like structure with a highly condensed network of aggregated crystals, while beeswax oleogels displayed elongated crystals which formed interconnected networks. Carnauba wax gels were harder than beeswax gels with better oil-binding capacity and higher crystallization and melting temperatures. Both oleogels showed good physical and oxidative stability during storage due to the immobilization of oil in the three-dimensional structures, and the presence of strong lipophilic antioxidants in LSBPE, respectively. As the proportion of waxes increased from 5 to 17.5%, the hardness, oil-binding capacity, crystallization, and melting temperatures increased in both gels due to the more developed crystalline associations. Addition of water had no significant effect on the physical and chemical stability of oleogels during storage. Water was distributed as small droplets in the crystalline network of oleogelators. However, hardness and oil-binding capacity decreased as water was added. Rich in polyunsaturated fatty acids and bioactive compounds, LSBPE oleogels offer the opportunity to deliver bioactives while simultaneously acting as fat substitutes.

Different Microfluidic Environments for In Vitro Testing of Lipid Nanoparticles against Osteosarcoma

The use of lipid nanoparticles as biodegradable shells for controlled drug delivery shows promise as a more effective and targeted tumor treatment than traditional treatment methods. Although the combination of target therapy with nanotechnology created new hope for cancer treatment, methodological issues during in vitro validation of nanovehicles slowed their application. In the current work, the effect of methotrexate (MTX) encapsulated in different matrices was evaluated in a dynamic microfluidic platform. Effects on the viability of osteosarcoma cells in the presence of recirculation of cell media, free MTX and two types of blank and drug-containing nanoparticles were successfully assessed in different tumor-mimicking microenvironments. Encapsulated MTX was more effective than the equal dose free drug treatment, as cell death significantly increased under the recirculation of both types of drug-loaded nanoparticles in all concentrations. In fact, MTX-nanoparticles reduced cell population 50 times more than the free drug when 150-µM drug dose was recirculated. Moreover, when compared to the equivalent free drug dose recirculation, cell number was reduced 60 and 100 points more under recirculation of each nanoparticle with a 15-µM drug concentration. Thus, the results obtained with the microfluidic model present MTX-lipid nanoparticles as a promising and more effective therapy for pediatric osteosarcoma treatment than current treatment options.

Gamma sterilization and in vivo evaluation of cationic nanostructured lipid carriers as potential ocular delivery systems for antiglaucoma drugs

Solid lipid nanoparticles and nanostructured lipid carriers showed promising results for enhancement of ocular bioavailability of drugs with poor corneal permeability. One of these drugs is methazolamide, which is an orally administered carbonic anhydrase inhibitor for glaucoma treatment. However, sterilization by autoclaving may result in loss of the physical properties of lipid nanoparticles such as particle size and surface charge. Here, we evaluated gamma radiation as an alternative sterilization method. Methazolamide loaded nanostructured lipid carriers were optimized using 2³ factorial design. Optimized formulations contained 6% lipid (85% solid lipid (Cetostearyl alcohol and glyceryl behenate) and 15% oil either medium chain triglycerides or isopropyl myristate) stabilized by 2% polysorbate 80 and 0.15% stearylamine. Nanoparticles were cationic, smaller than 500 nm, and had an entrapment efficiency of about 30%. They released methazolamide within 8 hours and showed a 5-fold enhanced reduction in intraocular pressure compared to methazolamide solution. Gamma sterilization was superior to autoclaving in preserving entrapped methazolamide, size, and surface charge of lipid nanoparticles. These findings demonstrate that gamma radiation is a viable alternative to autoclaving for sterilizing lipid nanoparticles. Moreover, this proves that nanostructured lipid carriers enhance pharmacological response of topically administered methazolamide for treating glaucoma.

Development of Perphenazine-Loaded Solid Lipid Nanoparticles: Statistical Optimization and Cytotoxicity Studies

OBJECTIVE

Perphenazine (PPZ), as a typical antipsychotic medical substance, has the same effectiveness compared to atypical antipsychotic medications for the treatment of schizophrenia. Despite the lipophilic essence, PPZ encounters limited bioavailability caused by the first-pass metabolism following oral administration. In the present study, PPZ-containing solid lipid nanoparticles (PPZ-SLNs) were prepared and optimized based on different factors, including lipid and surfactant amount, to develop appropriate and safe novel oral dosage forms of PPZ.

METHODS

The solvent emulsification-evaporation method was utilized to form SLNs by using soybean lecithin, glycerol monostearate (GMS), and Tween 80. Statistical optimization was done by the Box-Behnken design method to achieve formulation with optimized particle size, entrapment efficiency, and zeta potential. Also, transmission electron microscopy, in vitro release behavior, differential scanning calorimetry (DSC), and powder X-ray diffractometry (P-XRD) studies and cytotoxicity studies were assessed.

RESULTS

Optimization exhibited the significant effect of various excipients on SLN characteristics. Our finding indicated that the mean particle size, zeta potential, and entrapment efficiency of optimized PPZ-SLN were, respectively, 104 ± 3.92 nm, -28 ± 2.28 mV, and 83% ± 1.29. Drug release of PPZ-SLN was observed to be greater than 90% for 48 h that emphasized a sustained-release pattern. The DSC and P-XRD studies revealed the amorphous state of PPZ-SLN. FTIR spectra showed no incompatibility between the drug and the lipid. Performing cytotoxicity studies indicated no significant cytotoxicity on HT-29 cell culture.

CONCLUSION

Our study suggests that PPZ-SLNs can make a promising vehicle for a suitable therapy of schizophrenia for the oral drug delivery system.

Natural Lipids as Structural Components of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers for Topical Delivery

BACKGROUND

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) are useful drug delivery systems for dermal application. Thanks to their biocompatible and biodegradable profile, these carriers offer many advantages such as enhanced bioavailability, low toxicity, viable drug targeting and controlled release. SLN and NLC are composed of well-tolerated lipids, including natural fats and oils that are successfully used in the pharmaceutical and cosmetic dermal formulation.

OBJECTIVE

This article presents an overview of the benefits of selecting natural fats and oils as structural components of SLN and NLC for topical application.

METHODS

This review is based on data published over the past 20 years about the development of stable and nontoxic lipid nanoparticles with natural lipids. We shed light on the role of natural fats in skin restoration, as well as on the contributed penetration and occlusive properties of SLN and NLC.

RESULTS

The deliberate selection of excipients (type and lipid ratio) influences the quality of the final dermal formulation. Natural lipids show good compatibility with different active molecules and are able to create stable lipid matrices that facilitate the biopharmaceutical properties of lipid nanoparticles. Patents involving natural fats and oils in SLN and NLC composition are listed, yet it is important to note that the approved marketed formulations are mainly cosmetic, not pharmaceutical, products.

CONCLUSION

Natural lipids can enhance topical drug delivery by adding their ability of improving skin penetration and hydration to the permeation and occlusion properties of SLN and NLC.

Lipid-based nanostructures as a strategy to enhance curcumin bioaccessibility: Behavior under digestion and cytotoxicity assessment

The aim of this study was to evaluate the behavior of different lipid-based nanostructures during in vitro digestion, in particular on curcumin's bioaccessibility, and to access their potential toxicity. Solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC) and nanoemulsions (NE) were submitted to harmonized static in vitro digestion and their cytotoxicity and cellular transport were evaluated using Caco-2 cell line. NE presented the highest curcumin's bioaccessibility followed by NLC and SLN, 71.1%, 63.7% and 53.3%, respectively. Free fatty acids percentage increased in the following order: NLC ≤ NE < SLN. Non-digested nanostructures and excipients presented no cytotoxicity; however, digested NE and NLC presented cytotoxicity due to MCT oil, which presented cytotoxicity after digestion. The apparent permeability coefficient of NLC was higher than SLN and NE. These results showed that lipid-based nanostructures' physical state and composition have a high influence on particles' behavior during digestion, and on their cytotoxicity/intestinal permeability, and highlights the importance of conducting cytotoxicity assessments after in vitro digestion. This work contributes to a better understanding of the behavior of lipid-based nanostructures under digestion/adsorption, and this knowledge will be useful in design of nanostructures that afford both safety and an increased bioactive compounds' bioavailability.

Lyophilized Drug-Loaded Solid Lipid Nanoparticles Formulated with Beeswax and Theobroma Oil

Solid lipid nanoparticles (SLNs) have the potential to enhance the systemic availability of an active pharmaceutical ingredient (API) or reduce its toxicity through uptake of the SLNs from the gastrointestinal tract or controlled release of the API, respectively. In both aspects, the responses of the lipid matrix to external challenges is crucial. Here, we evaluate the effects of lyophilization on key responses of 1:1 beeswax-theobroma oil matrix SLNs using three model drugs: amphotericin B (AMB), paracetamol (PAR), and sulfasalazine (SSZ). Fresh SLNs were stable with sizes ranging between 206.5-236.9 nm. Lyophilization and storage for 24 months (4-8 °C) caused a 1.6- and 1.5-fold increase in size, respectively, in all three SLNs. Zeta potential was >60 mV in fresh, stored, and lyophilized SLNs, indicating good colloidal stability. Drug release was not significantly affected by lyophilization up to 8 h. Drug release percentages at end time were 11.8 ± 0.4, 65.9 ± 0.04, and 31.4 ± 1.95% from fresh AMB-SLNs, PAR-SLNs, and SSZ-SLNs, respectively, and 11.4 ± 0.4, 76.04 ± 0.21, and 31.6 ± 0.33% from lyophilized SLNs, respectively. Thus, rate of release is dependent on API solubility (AMB < SSZ < PAR). Drug release from each matrix followed the Higuchi model and was not affected by lyophilization. The above SLNs show potential for use in delivering hydrophilic and lipophilic drugs.

Solid Lipid Particles for Lung Metastasis Treatment

Solid lipid particles (SLPs) can sustainably encapsulate and release therapeutic agents over long periods, modifying their biodistribution, toxicity, and side effects. To date, no studies have been reported using SLPs loaded with doxorubicin chemotherapy for the treatment of metastatic cancer. This study characterizes the effect of doxorubicin-loaded carnauba wax particles in the treatment of lung metastatic malignant melanoma in vivo. Compared with the free drug, intravenously administrated doxorubicin-loaded SLPs significantly reduce the number of pulmonary metastatic foci in mice. In vitro kinetic studies show two distinctive drug release profiles. A first chemotherapy burst-release wave occurs during the first 5 h, which accounts for approximately 30% of the entrapped drug rapidly providing therapeutic concentrations. The second wave occurs after the arrival of the particles to the final destination in the lung. This release is sustained for long periods (>40 days), providing constant levels of chemotherapy in situ that trigger the inhibition of metastatic growth. Our findings suggest that the use of chemotherapy with loaded SLPs could substantially improve the effectiveness of the drug locally, reducing side effects while improving overall survival.

Solid Lipid Nanoparticles for Topical Drug Delivery: Mechanisms, Dosage Form Perspectives, and Translational Status

Solid lipid nanoparticles (SLNs) have shown potential as a novel lipid-based drug delivery system for the topical applications of innumerable therapeutic compounds. However, the mechanisms governing the absorption and cellular uptake of SLNs through topical route, along with the mechanism of drug release from SLNs are still ambiguous, and require further investigation. In addition, the selection of an appropriate dosage form/formulation base is essential for ease of application of SLNs and to enhance dermal and transdermal delivery. Upscaling and regulatory approvals are other challenges that may impede the clinical translation of SLNs. Therefore, this review focusses on different mechanisms involved in skin penetration and cellular uptake of SLNs. This is followed by a comprehensive discussion on the physicochemical properties of SLNs including various formulation and dosage form factors, which might influence the absorption of SLNs through the skin. Finally, translational status with respect to scale-up and regulatory aspects are also discussed. This review will be useful to researchers with an interest in topical applications of SLNs for the efficient delivery of drugs and cosmetics.