Silk fibroin nanoparticles support in vitro sustained antibiotic release and osteogenesis on titanium surface

Prospectives and challenges of nano-tailored biomaterials-assisted biological molecules delivery for tissue engineering purposes

Nano carriers have gained more attention for their possible medical and technological applications. Tailored nanomaterials can transport medications efficiently to targeted areas and allow for sustained medication discharge, reducing undesirable toxicities while boosting curative effectiveness. Nonetheless, transitioning nanomedicines from experimental to therapeutic applications has proven difficult, so different pharmaceutical incorporation approaches in nano scaffolds are discussed. Then numerous types of nanobiomaterials implemented as carriers and their manufacturing techniques are explored. This article is also supported by various applications of nanobiomaterials in the biomedical field.

Stepwise degradable PGA-SF core-shell electrospinning scaffold with superior tenacity in wetting regime for promoting bone regeneration

Regenerating bone in the oral and maxillofacial region is clinically challenging due to the complicated osteogenic environment and the limitation of existing bone graft materials. Constructing bone graft materials with controlled degradation and stable mechanical properties in a physiological environment is of utmost importance. In this study, we used silk fibroin (SF) and polyglycolic acid (PGA) to fabricate a coaxial PGA-SF fibrous scaffold (PGA-SF-FS) to meet demands for bone grafts. The SF shell exerted excellent osteogenic activity while protecting PGA from rapid degradation and the PGA core equipped scaffold with excellent tenacity. The experiments related to biocompatibility and osteogenesis (e.g., cell attachment, proliferation, differentiation, and mineralization) demonstrated the superior ability of PGA-SF-FS to improve cell growth and osteogenic differentiation. Furthermore, in vivo testing using Sprague-Dawley rat cranial defect model showed that PGA-SF-FS accelerates bone regeneration as the implantation time increases, and its stepwise degradation helps to match the remodeling kinetics of the host bone tissue. Besides, immunohistochemical staining of CD31 and Col-1 confirmed the ability of PGA-SF-FS to enhance revascularization and osteogenesis response. Our results suggest that PGA-SF-FS fully utilizing the advantages of both components, exhibites stepwise degradation and superior tenacity in wetting regime, making it a promising candidate in the treatment of bone defects.

Application of silk fibroin coatings for biomaterial surface modification: a silk road for biomedicine

Silk fibroin (SF) as a natural biopolymer has become a popular material for biomedical applications due to its minimal immunogenicity, tunable biodegradability, and high biocompatibility. Nowadays, various techniques have been developed for the applications of SF in bioengineering. Most of the literature reviews focus on the SF-based biomaterials and their different forms of applications such as films, hydrogels, and scaffolds. SF is also valuable as a coating on other substrate materials for biomedicine; however, there are few reviews related to SF-coated biomaterials. Thus, in this review, we focused on the surface modification of biomaterials using SF coatings, demonstrated their various preparation methods on substrate materials, and introduced the latest procedures. The diverse applications of SF coatings for biomedicine are discussed, including bone, ligament, skin, mucosa, and nerve regeneration, and dental implant surface modification. SF coating is conducive to inducing cell adhesion and migration, promoting hydroxyapatite (HA) deposition and matrix mineralization, and inhibiting the Notch signaling pathway, making it a promising strategy for bone regeneration. In addition, SF-coated composite scaffolds can be considered prospective candidates for ligament regeneration after injury. SF coating has been proven to enhance the mechanical properties of the substrate material, and render integral stability to the dressing material during the regeneration of skin and mucosa. Moreover, SF coating is a potential strategy to accelerate nerve regeneration due to its dielectric properties, mechanical flexibility, and angiogenesis promotion effect. In addition, SF coating is an effective and popular means for dental implant surface modification to promote osteogenesis around implants made of different materials. Thus, this review can be of great benefit for further improvements in SF-coated biomaterials, and will undoubtedly contribute to clinical transformation in the future.

Evaluation and Application of Silk Fibroin Based Biomaterials to Promote Cartilage Regeneration in Osteoarthritis Therapy

Osteoarthritis (OA) is a common joint disease characterized by cartilage damage and degeneration. Traditional treatments such as NSAIDs and joint replacement surgery only relieve pain and do not achieve complete cartilage regeneration. Silk fibroin (SF) biomaterials are novel materials that have been widely studied and applied to cartilage regeneration. By mimicking the fibrous structure and biological activity of collagen, SF biomaterials can promote the proliferation and differentiation of chondrocytes and contribute to the formation of new cartilage tissue. In addition, SF biomaterials have good biocompatibility and biodegradability and can be gradually absorbed and metabolized by the human body. Studies in recent years have shown that SF biomaterials have great potential in treating OA and show good clinical efficacy. Therefore, SF biomaterials are expected to be an effective treatment option for promoting cartilage regeneration and repair in patients with OA. This article provides an overview of the biological characteristics of SF, its role in bone and cartilage injuries, and its prospects in clinical applications to provide new perspectives and references for the field of bone and cartilage repair.

Recent advances on nanomaterials for antibacterial treatment of oral diseases

An imbalance of bacteria in oral environment can lead to a variety of oral diseases, such as periodontal disease, dental caries, and peri-implant inflammation. In the long term, in view of the increasing bacterial resistance, finding suitable alternatives to traditional antibacterial methods is an important research today. With the development of nanotechnology, antibacterial agents based on nanomaterials have attracted much attention in dental field due to their low cost, stable structures, excellent antibacterial properties and broad antibacterial spectrum. Multifunctional nanomaterials can break through the limitations of single therapy and have the functions of remineralization and osteogenesis on the basis of antibacterial, which has made significant progress in the long-term prevention and treatment of oral diseases. In this review, we have summarized the applications of metal and their oxides, organic and composite nanomaterials in oral field in recent five years. These nanomaterials can not only inactivate oral bacteria, but also achieve more efficient treatment and prevention of oral diseases by improving the properties of the materials themselves, enhancing the precision of targeted delivery of drugs and imparting richer functions. Finally, future challenges and untapped potential are elaborated to demonstrate the future prospects of antibacterial nanomaterials in oral field.

Scalable Production of Monodisperse Bioactive Spider Silk Nanowires

Elongated protein-based micro- and nanostructures are of great interest for a wide range of biomedical applications, where they can serve as a backbone for surface functionalization and as vehicles for drug delivery. Current production methods for protein constructs lack precise control of either shape and dimensions or render structures fixed to substrates. This work demonstrates production of recombinant spider silk nanowires suspended in solution, starting with liquid bridge induced assembly (LBIA) on a substrate, followed by release using ultrasonication, and concentration by centrifugation. The significance of this method lies in that it provides i) reproducability (standard deviation of length <13% and of diameter <38%), ii) scalability of fabrication, iii) compatibility with autoclavation with retained shape and function, iv) retention of bioactivity, and v) easy functionalization both pre- and post-formation. This work demonstrates how altering the function and nanotopography of a surface by nanowire coating supports the attachment and growth of human mesenchymal stem cells (hMSCs). Cell compatibility is further studied through integration of nanowires during aggregate formation of hMSCs and the breast cancer cell line MCF7. The herein-presented industrial-compatible process enables silk nanowires for use as functionalizing agents in a variety of cell culture applications and medical research.

Antimicrobial behavior of titanium coating with chlorhexidine-doped thin film exposed to a biofilm supplemented with nicotine

Because nicotine upregulates the growth of most oral bacteria, this in vitro study investigated the antimicrobial effect of chlorhexidine-doped thin film on commercially pure titanium against Fusobacterium nucleatum (F. nucleatum) biofilm supplemented with different concentrations of nicotine (0, 1, and 2 mg/mL). Biofilms were formed on a chlorhexidine-doped thin film on commercially-pure-titanium discs and compared to the control groups. Biofilm viability, total biofilm growth using a spectrophotometer, extracellular polysaccharide content, and pH variations were assessed as dependent variables. Data were submitted to ANOVA and Tukey honest significant difference tests (α=0.05). F. nucleatum biofilm growth was inhibited when exposed to chlorhexidine-doped thin film (p<0.05). Biofilm supplemented with nicotine did not impact the synthesis of EPS on the same type of treatment (p>0.05). The pH values were significantly increased with the increase of nicotine concentration (p<0.05). Chlorhexidine-doped thin film was effective in reducing F. nucleatum biofilm supplemented with nicotine.

Silk proteins in reconstructive surgery: Do they possess an inherent antibacterial activity? A systematic review

The field of reconstructive surgery encompasses a wide range of surgical procedures and regenerative approaches to treat various tissue types. Every surgical procedure is associated with the risk of surgical site infections, which are not only a financial burden but also increase patient morbidity. The surgical armamentarium in this area are biomaterials, particularly natural, biodegradable, biocompatible polymers, including the silk proteins fibroin (SF) and sericin (SS). Silk is known to be derived from silkworms and is mainly composed of 60-80% fibroin, which provides the structural form, and 15-35% sericin, which acts as a glue-like substance for the SF threads. Silk proteins possess most of the desired properties for biomedical applications, including biocompatibility, biodegradability, minimal immunogenicity, and tunable biomechanical behaviour. In an effort to alleviate or even prevent infections associated with the use of biomaterials in surgery, antibacterial/antimicrobial properties have been investigated in numerous studies. In this systematic review, the following question was addressed: Do silk proteins, SF and SS, possess an intrinsic antibacterial property and how could these materials be tailored to achieve such a property?

Silk fibroin scaffolds: A promising candidate for bone regeneration

It remains a big challenge in clinical practice to repair large-sized bone defects and many factors limit the application of autografts and allografts, The application of exogenous scaffolds is an alternate strategy for bone regeneration, among which the silk fibroin (SF) scaffold is a promising candidate. Due to the advantages of excellent biocompatibility, satisfying mechanical property, controllable biodegradability and structural adjustability, SF scaffolds exhibit great potential in bone regeneration with the help of well-designed structures, bioactive components and functional surface modification. This review will summarize the cell and tissue interaction with SF scaffolds, techniques to fabricate SF-based scaffolds and modifications of SF scaffolds to enhance osteogenesis, which will provide a deep and comprehensive insight into SF scaffolds and inspire the design and fabrication of novel SF scaffolds for superior osteogenic performance. However, there still needs more comprehensive efforts to promote better clinical translation of SF scaffolds, including more experiments in big animal models and clinical trials. Furthermore, deeper investigations are also in demand to reveal the degradation and clearing mechanisms of SF scaffolds and evaluate the influence of degradation products.

Insight in Superiority of the Hydrophobized Gentamycin in Terms of Antibiotics Delivery to Bone Tissue

Bone infections are a serious problem to cure, as systemic administration of antibiotics is not very effective due to poor bone vascularization. Therefore, many drug delivery systems are investigated to solve this problem. One of the potential solutions is the delivery of antibiotics from poly(L-actide-co-glycolide) (PLGA) nanoparticles suspended in the gellan gum injectable hydrogel. However, the loading capacity and release kinetics of the system based on hydrophilic drugs (e.g., gentamycin) and hydrophobic polymers (e.g., PLGA) may not always be satisfying. To solve this problem, we decided to use hydrophobized gentamycin obtained by ion-pairing with dioctyl sulfosuccinate sodium salt (AOT). Herein, we present a comparison of the PLGA nanoparticles loaded with hydrophobic or hydrophilic gentamycin and suspended in the hydrogel in terms of physicochemical properties, drug loading capacity, release profiles, cytocompatibility, and antibacterial properties. The results showed that hydrophobic gentamycin may be combined in different formulations with the hydrophilic one and is superior in terms of encapsulation efficiency, drug loading, release, and antibacterial efficacy with no negative effect on the NPs morphology or hydrogel features. However, the cytocompatibility of hydrophobic gentamycin might be lower, consequently more extensive study on its biological properties should be provided to evaluate a safe dose.

Construction of Local Drug Delivery System on Titanium-Based Implants to Improve Osseointegration

Titanium and its alloys are the most widely applied orthopedic and dental implant materials due to their high biocompatibility, superior corrosion resistance, and outstanding mechanical properties. However, the lack of superior osseointegration remains the main obstacle to successful implantation. Previous traditional surface modification methods of titanium-based implants cannot fully meet the clinical needs of osseointegration. The construction of local drug delivery systems (e.g., antimicrobial drug delivery systems, anti-bone resorption drug delivery systems, etc.) on titanium-based implants has been proved to be an effective strategy to improve osseointegration. Meanwhile, these drug delivery systems can also be combined with traditional surface modification methods, such as anodic oxidation, acid etching, surface coating technology, etc., to achieve desirable and enhanced osseointegration. In this paper, we review the research progress of different local drug delivery systems using titanium-based implants and provide a theoretical basis for further research on drug delivery systems to promote bone–implant integration in the future.

Investigation of toxicity effect of TiCN coated on 304 SS and 410 SS substrates in rat fibroblasts and B-lymphocytes

In the present study, TiCN thin films were coated on AISI 304 and AISI 410 stainless steel (SS) substrates by Cathodic Arc Physical Vapor Deposition method. TiCN-coated substrates were confirmed by the XRD analysis results. Dense morphology and fine-grained surface of TiCN film were established by SEM images. Cellular toxicity of the coated 304 SS and 410 SS substrates was investigated in the fibroblasts and B-lymphocyte. In respect to that, we have shown coated substrates cytotoxicity, oxidative stress as well as cell viability, reactive oxygen species (ROS), lipid peroxidation (MDA), protein carbonyl, glutathione oxidase (GSSG), and glutathione reductase (GSH) assessment, releasing cytochrome c (Cytc), lysosomal membrane destabilization (AO) may lead to cell death signaling. Our results showed that the coated 304 SS and 410 SS substrates induced cells dysfunction via a significant increase in ROS production, MDA (P < 0.01 and P < 0.001), protein carbonyl (P < 0.05), and GSSG (P < 0.05 and P < 0.01) that correlated to cytochrome c release (P < 0.01). In addition, increased disturbance in oxidative phosphorylation was also shown by the decrease in cell viability (P < 0.001) and GSH (P < 0.01 and P < 0.001) in the coated 304 SS and 410 SS substrates-treated fibroblast and B-lymphocytes. The coated 304 SS and 410 SS substrates contacted cells and trafficked to the lysosomes and this is followed by lysosomal damage, leading to apoptosis/Necrosis. Our results indicated that these materials cause cellular dysfunction and subsequent oxidative stress leading to cognitive impairment in the rat fibroblasts and B-lymphocytes cells.

A Review on Antibacterial Silk Fibroin-based Biomaterials: Current State and Prospects

Bacterial contamination of biomaterials is a common problem and a serious threat to human health worldwide. Therefore, the development of multifunctional biomaterials that possess antibacterial properties and can resist infection is a continual goal for biomedical applications. Silk fibroin (SF), approved by U.S. Food and Drug Administration (FDA) as a biomaterial, is one of the most widely studied natural polymers for biomedical applications due to its unique mechanical properties, biocompatibility, tunable biodegradation, and versatile material formats. In the last decade, many methods have been employed for the development of antibacterial SF-based biomaterials (SFBs) such as physical loading or chemical functionalization of SFBs with different antibacterial agents and bio-inspired surface modifications. In this review, we first describe the current understanding of the composition and structure-properties relationship of SF as a leading-edge biomaterial. Then we demonstrate the different antibacterial agents and methods implemented for the development of bactericidal SFBs, their mechanisms of action, and different applications. We briefly address their fabrication methods, advantages, and limitations, and finally discuss the emerging technologies and future trends in this research area.

Nitric Oxide-Releasing Gelatin Methacryloyl/Silk Fibroin Interpenetrating Polymer Network Hydrogels for Tissue Engineering Applications

Bacterial infection is one of the principal reasons for the failure of tissue engineering scaffolds. Therefore, the development of multifunctional scaffolds that not only are able to guide tissue regeneration but also can inhibit bacterial colonization is of great importance for tissue engineering applications. In this study, a highly antibacterial, biocompatible, and biodegradable scaffold based on silk fibroin (SF) and gelatin methacryloyl (GelMA) was prepared. Sequential cross-linking of GelMA and SF under UV irradiation and methanol treatment, respectively, resulted in the formation of interpenetrating network (IPN) hydrogels with a porous structure. In addition, impregnation of the hydrogels with a nitric oxide (NO) donor molecule, S-nitroso-N-acetylpenicillamine (SNAP), led to the development of NO-releasing scaffolds with strong antibacterial properties. According to the obtained results, the addition of SF to GelMA hydrogels caused an enhancement in the mechanical properties and NO release kinetics and prevented their rapid enzymatic degradation in aqueous media. Furthermore, swelling the GelMA-SF scaffolds with SNAP resulted in a bacteria reduction efficiency of >99.9% against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The scaffolds also showed great cytocompatibility in vitro by increasing the proliferation and supporting the adhesion of 3T3 mouse fibroblast cells. Overall, GelMA-SF-SNAP showed great promise to be used as a scaffold for tissue engineering and wound healing applications.

Recent advances in the local antibiotics delivery systems for management of osteomyelitis

Chronic osteomyelitis is a challenging disease due to its serious rates of mortality and morbidity while the currently available treatment strategies are suboptimal. In contrast to the adopted systemic treatment approaches after surgical debridement in chronic osteomyelitis, local drug delivery systems are receiving great attention in the recent decades. Local drug delivery systems using special carriers have the pros of enhancing the feasibility of penetration of antimicrobial agents to bone tissues, providing sustained release and localized concentrations of the antimicrobial agents in the infected area while avoiding the systemic side effects and toxicity. Most important, the incorporation of osteoinductive and osteoconductive materials in these systems assists bones proliferation and differentiation, hence the generation of new bone materials is enhanced. Some of these systems can also provide mechanical support for the long bones during the healing process. Most important, if the local systems are designed to be injectable to the affected site and biodegradable, they will reduce the level of invasion required for implantation and can win the patients’ compliance and reduce the healing period. They will also allow multiple injections during the course of therapy to guard against the side effect of the long-term systemic therapy. The current review presents different available approaches for delivering antimicrobial agents for the treatment of osteomyelitis focusing on the recent advances in researches for local delivery of antibiotics.

HIGHLIGHTS

Chronic osteomyelitis is a challenging disease due to its serious mortality and morbidity rates and limited effective treatment options.

Local drug delivery systems are receiving great attention in the recent decades.

Osteoinductive and osteoconductive materials in the local systems assists bones proliferation and differentiation

Local systems can be designed to provide mechanical support for the long bones during the healing process.

Designing the local system to be injectable to the affected site and biodegradable will reduces the level of invasion and win the patients’ compliance.

Nonmulberry silk proteins: multipurpose ingredient in bio-functional assembly

The emerging field of tissue engineering and regenerative medicines utilising artificial polymers is facing many problems. Despite having mechanical stability, non-toxicity and biodegradability, most of them lack cytocompatibility and biocompatibility. Natural polymers (such as collagen, hyaluronic acid, fibrin, fibroin, and others), including blends, are introduced to the field to solve some of the relevant issues. Another natural biopolymer: silkworm silk gained special attention primarily due to its specific biophysical, biochemical, and material properties, worldwide availability, and cost-effectiveness. Silk proteins, namely fibroin and sericin extracted from domesticated mulberry silkwormBombyx mori, are studied extensively in the last few decades for tissue engineering. Wild nonmulberry silkworm species, originated from India and other parts of the world, also produce silk proteins with variations in their nature and properties. Among the nonmulberry silkworm species,Antheraea mylitta(Indian Tropical Tasar),A. assamensis/A. assama(Indian Muga), andSamia ricini/Philosamia ricini(Indian Eri), along withA. pernyi(Chinese temperate Oak Tasar/Tussah) andA. yamamai(Japanese Oak Tasar) exhibit inherent tripeptide motifs of arginyl glycyl aspartic acid in their fibroin amino acid sequences, which support their candidacy as the potential biomaterials. Similarly, sericin isolated from such wild species delivers unique properties and is used as anti-apoptotic and growth-inducing factors in regenerative medicines. Other characteristics such as biodegradability, biocompatibility, and non-inflammatory nature make it suitable for tissue engineering and regenerative medicine based applications. A diverse range of matrices, including but not limited to nano-micro scale structures, nanofibres, thin films, hydrogels, and porous scaffolds, are prepared from the silk proteins (fibroins and sericins) for biomedical and tissue engineering research. This review aims to represent the progress made in medical and non-medical applications in the last couple of years and depict the present status of the investigations on Indian nonmulberry silk-based matrices as a particular reference due to its remarkable potentiality of regeneration of different types of tissues. It also discusses the future perspective in tissue engineering and regenerative medicines in the context of developing cutting-edge techniques such as 3D printing/bioprinting, microfluidics, organ-on-a-chip, and other electronics, optical and thermal property-based applications.

[Progress in the application of silk fibroin in tissue engineered drug delivery system]

Objective

The properties and characteristics of different types of silk fibroin (SF) drug-loaded sustained-release carriers and their effects on the drug release behavior were reviewed, and the existing problems and development prospects of SF drug-loaded sustained-release carriers in tissue engineering drug delivery system were discussed.

Methods

The literatures about drug-loaded SF sustained-release carriers in recent years were extensively consulted, and the types of sustained-release carriers, characteristics of drug release, range of applications, advantages and disadvantages, and solutions were summarized and analyzed.

Results

At present, the SF drug-loaded sustained-release carriers are mainly divided into SF microparticles, SF scaffolds, SF membranes, SF hydrogels, SF nanofibers, SF sponges, and so on. These types of SF drug-loaded sustained-release carriers have their own advantages and problems, of which the most prominent problem is the burst release of drugs at the initial stage. While, the initial burst release of drugs can be effectively solved by improving the preparation process and adjusting the material ratio. Different types of drug-loaded sustained-release carriers can be prepared by combining different materials to achieve different application scopes and drug release behaviors under different conditions.

Conclusion

SF is a good drug-loaded carrier for tissue engineering, the burst release of drugs at the initial stage can be solved by improving the preparation process and changing the material structure; through the combination of the advantages of various types of SF drug-loaded sustained-release carriers, it is expected to prepare SF drug-loaded sustained-release carriers that meet different clinical needs.

First Experimental Study of the Influence of Extracellular Vesicles Derived from Multipotent Stromal Cells on Osseointegration of Dental Implants

Herein, the aim was to study the state of the bone tissue adjacent to dental implants after the use of extracellular vesicles derived from multipotent stromal cells (MSC EVs) of bone marrow origin in the experiment. In compliance with the rules of asepsis and antiseptics under general intravenous anesthesia with propofol, the screw dental implants were installed in the proximal condyles of the tibia of outbred rabbits without and with preliminary introduction of 19.2 μg MSC EVs into each bone tissue defect. In 3, 7, and 10 days after the operation, the density of bone tissue adjacent to different parts of the implant using an X-ray unit with densitometer was measured. In addition, the histological examinations of the bone site with the hole from the removed device and the soft tissues from the surface of the proximal tibial condyle in the area of intra-bone implants were made. It was found out that 3 days after implantation with the use of MSC EVs, the bone density was statistically significantly higher by 47.2% than after the same implantation, but without the injection of MSC EVs. It is possible that as a result of the immunomodulatory action of MSC EVs, the activity of inflammation decreases, and, respectively, the degree of vasodilation in bones and leukocyte infiltration of the soft tissues are lower, in comparison with the surgery performed in the control group. The bone fragments formed during implantation are mainly consolidated with each other and with the regenerating bone. Day 10 demonstrated that all animals with the use of MSC EVs had almost complete fusion of the screw device with the bone tissue, whereas after the operation without the application of MSC EVs, the heterogeneous histologic pattern was observed: From almost complete osseointegration of the implant to the absolute absence of contact between the foreign body and the new formed bone. Therefore, the use of MSC EVs during the introduction of dental implants into the proximal condyle of the tibia of rabbits contributes to an increase of the bone tissue density near the device after 3 days and to the achievement of consistently successful osseointegration of implants 10 days after the surgery.

Polydopamine-assisted immobilization of silk fibroin and its derived peptide on chemically oxidized titanium to enhance biological activity in vitro

Biochemical modification can endow the surface of implants with superior biological activity. Herein, silk fibroin (SF) protein and its anionic derivative peptides (Cs) were covalently immobilized onto a titanium implant surface via a polydopamine layer. The successful conjugation of SF and Cs was revealed by X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and contact angle measurements. The addition of Cs prevented the conformational transition of silk fibroin to silk II. The deposition of apatite on its surface was significantly accelerated, and the bioactive composite coating was observed to enhance protein adsorption and cell proliferation. More importantly, it also promoted the osteogenic differentiation of bone marrow stem cells (BMSCs) for the quantitative and qualitative detection of alkaline phosphatase (ALP) and alizarin red (ARS). Overall, the stable performance and enhanced osteogenic property of the composite coating promote an extensive application for clinical titanium-based implants.

Silk Biomaterials for Bone Tissue Engineering

Silk is a natural fibrous polymer with application potential in regenerative medicine. Increasing interest remains for silk materials in bone tissue engineering due to their characteristics in biocompatibility, biodegradability and mechanical properties. Plenty of the in vitro and in vivo studies confirmed the advantages of silk in accelerating bone regeneration. Silk is processed into scaffolds, hydrogels, and films to facilitate different bone regenerative applications. Bioactive factors such as growth factors and drugs, and stem cells are introduced to silk-based matrices to create friendly and osteogenic microenvironments, directing cell behaviors and bone regeneration. The recent progress in silk-based bone biomaterials is discussed and focused on different fabrication and functionalization methods related to osteogenesis. The challenges and potential targets of silk bone materials are highlighted to evaluate the future development of silk-based bone materials.

HA-hybrid matrix composite coating on Ti-Cp for biomedical application

Calcium phosphate coatings have been applied to titanium metal substrates and their alloys as a synergistic alternative capable of combining the mechanical properties of metals and the excellent bioactive properties provided by ceramic materials. However, the unsatisfactory adhesion of hydroxyapatite coatings on metallic substrates, as well as their limitation when subjected to mechanical stresses have been reported as a limitation. Biofunctional coatings have been proposed as an alternative to single ceramic coatings, aiming at optimizing the long-term clinical success of biomaterials such as Ti. This work aims at evaluating the morphological properties and biological behavior of Ti-cp coated with matrix composite coating hydroxyapatite-containing hybrid. The hybrid matrix was obtained from TEOS and MTES silicon precursors, with dispersed hydroxyapatite suspended by dip coating. For the morphological characterization FTIR, SEM/FEG, AFM and contact angle measurement were used. Biological behavior was evaluated for toxicity, cell viability and the osteogenic differentiation capacity of mesenchymal stem cells. The composite coatings obtained showed regular dispersion of hydroxyapatite particles in the hybrid matrix, with uniform coating adhering to the Ti-Cp substrate. Nevertheless, although they provided similar viability behavior of mesenchymal stem cells to the Ti-Cp substrate, the evaluated coatings did not present osteoinductive properties. This result is probably due to the pronounced hydrophobic behavior caused by the incorporation of HA.

Synthesis of multifunctional chlorhexidine-doped thin films for titanium-based implant materials

Our goal was to create bio-functional chlorhexidine (CHX)-doped thin films on commercially pure titanium (cpTi) discs using the glow discharge plasma approach. Different plasma deposition times (50, 35 and 20 min) were used to create bio-functional surfaces based on silicon films with CHX that were compared to the control groups [no CHX and bulk cpTi surface (machined)]. Physico-chemical and biological characterizations included: 1. Morphology, roughness, elemental chemical composition, film thickness, contact angle and surface free energy; 2. CHX-release rate; 3. Antibacterial effect on Streptococcus sanguinis biofilms at 24, 48 and 72 h; 4. Cytotoxicity and metabolic activity using fibroblasts cell culture (NIH-F3T3 cells) at 1, 2, 3 and 4 days; 5. Protein expression by NIH-F3T3 cells at 1, 2, 3 and 4 days; and 6. Co-culture assay of fibroblasts cells and S. sanguinis to assess live and dead cells on the confocal laser scanning microscopy, mitochondrial activity (XTT), membrane leakage (LDH release), and metabolic activity (WST-1 assay) at 1, 2 and 3 days of co-incubation. Data analysis showed that silicon films, with or without CHX coated cpTi discs, increased surface wettability and free energy (p < 0.05) without affecting surface roughness. CHX release was maintained over a 22-day period and resulted in a significant inhibition of biofilm growth (p < 0.05) at 48 and 72 h of biofilm formation for 50 min and 20 min of plasma deposition time groups, respectively. In general, CHX treatment did not significantly affect NIH-F3T3 cell viability (p > 0.05), whereas cell metabolism (MTT assay) was affected by CHX, with the 35 min of plasma deposition time group displaying the lowest values as compared to bulk cpTi (p < 0.05). Moreover, data analysis showed that films, with or without CHX, significantly affected the expression profile of inflammatory cytokines, including IL-4, IL-6, IL-17, IFN-y and TNF-α by NIH-F3T3 cells (p < 0.05). Co-culture demonstrated that CHX-doped film did not affect the metabolic activity, cytotoxicity and viability of fibroblasts cells (p > 0.05). Altogether, the findings of the current study support the conclusion that silicon films added with CHX can be successfully created on titanium discs and have the potential to affect bacterial growth and inflammatory markers without affecting cell viability/proliferation rates.

Bioactive Healing Abutment as a Potential Tool for the Treatment of Peri-Implant Disease—In Vitro Study

The common use of dental implants for dental reconstruction poses new treatment challenges for physicians, peri-implantitis being a particularly difficult one. Micro-organisms, including drug-resistant Staphylococcus spp. strains, play a crucial role in the etiology of peri-implantitis. In this paper, the authors assess the efficacy of a bioactive healing abutment (BHA) of their own design for the local release of antibiotics as a potential tool for the treatment of peri-implant disease. BHA filled with a collagen material, combined with the antibiotics clindamycin and tetracycline, was tested in vitro by disk diffusion assay. Antibacterial activity was observed for the chosen Staphylococcus aureus and Staphylococcus epidermidis bacterial strains. In addition, the impact of titanium discs (which were used to make the BHA) was monitored. The results show that the zone diameter breakpoints for BHA are higher than those of standard absorbent paper discs in both tested strains for both tested antibiotics. This work demonstrates that the proposed BHA can serve as an effective and precise drug carrier. The release of antibiotics from the described implant device is easy to control and allows for an effective local antibacterial in vitro treatment. The procedure is inexpensive, easy to perform, and repeatable.

Regulation of MSC and macrophage functions in bone healing by peptide LL-37-loaded silk fibroin nanoparticles on a titanium surface

Titanium-based materials have been long regarded as effective bone implants for clinical use, yet the corresponding osteointegration ability needs to be optimized. This challenge can be overcome by fabricating titanium (Ti) materials with physiological functions. In this study, peptide LL-37-loaded silk fibroin nanoparticles (SFNPs) were immobilized on a titanium surface to facilitate osteointegration by regulating the physiological functions of mesenchymal stem cells (MSCs) and macrophages. According to our results, the cell viability, recruitment and paracrine responses of MSCs and macrophages were improved by the modified Ti samples. MSC differentiation was promoted by the macrophages incubated on the modified Ti samples, and the phenotype switch of macrophages was also modulated by the MSCs incubated on the modified Ti samples. In vivo studies proved that the modified Ti implant induced MSC and macrophage recruitments to injury sites and the inflammatory response was positively regulated. Moreover, better bone formation was achieved around the modified Ti implant 28 days after surgery. This suggested that the immobilization of peptide LL-37-loaded SFNPs on a titanium surface improves osteointegration via the regulation of physiological functions of MSCs and macrophages.

Advances in biomolecule inspired polymeric material decorated interfaces for biological applications

With the development of surface modification technology, interface properties have great effects on the interaction between biomedical materials and cells and biomolecules, which significantly affects the biocompatibility and functionality of materials. As an orderly and perfect system, biological organisms in nature effectively integrate all kinds of bio-interfaces with physiological functions, which shed light on the importance of biomolecules in organisms. It gives birth to a bio-inspiration strategy to design and fabricate smart materials with specific functionalities, e.g. osteogenic and chondrocytic induced materials inspired by bone sialoprotein and chondroitin sulfate. Through this mimicking approach, various functional materials were utilized to decorate the interfaces and further optimize the performance of biomedical materials, which would widely expand their applications. In this review, followed by a summary and brief introduction of surface modification methods, we highlight recent advances in the fabrication of functional polymeric materials inspired by a range of biomolecules for decorating interfaces. Then, the other applications of biomolecule inspired materials including tissue engineering, diagnosis and treatment of diseases and physiological function regulation are presented and the future outlook is discussed as well.

Recent trends in the application of widely used natural and synthetic polymer nanocomposites in bone tissue regeneration

The goal of a biomaterial is to support the bone tissue regeneration process at the defect site and eventually degrade in situ and get replaced with the newly generated bone tissue. Nanocomposite biomaterials are a relatively new class of materials that incorporate a biopolymeric and biodegradable matrix structure with bioactive and easily resorbable fillers which are nano-sized. This article is a review of a few polymeric nanocomposite biomaterials which are potential candidates for bone tissue regeneration. These nanocomposites have been broadly classified into two groups viz. natural and synthetic polymer based. Natural polymer-based nanocomposites include materials fabricated through reinforcement of nanoparticles and/or nanofibers in a natural polymer matrix. Several widely used natural biopolymers, such as chitosan (CS), collagen (Col), cellulose, silk fibroin (SF), alginate, and fucoidan, have been reviewed regarding their present investigation on the incorporation of nanomaterial, biocompatibility, and tissue regeneration. Synthetic polymer-based nanocomposites that have been covered in this review include polycaprolactone (PCL), poly (lactic-co-glycolic) acid (PLGA), polyethylene glycol (PEG), poly (lactic acid) (PLA), and polyurethane (PU) based nanocomposites. An array of nanofillers, such as nano hydroxyapatite (nHA), nano zirconia (nZr), nano silica (nSi), silver nano particles (AgNPs), nano titanium dioxide (nTiO₂), graphene oxide (GO), that is used widely across the bone tissue regeneration research platform are included in this review with respect to their incorporation into a natural and/or synthetic polymer matrix. The influence of nanofillers on cell viability, both in vitro and in vivo, along with cytocompatibility and new tissue generation has been encompassed in this review. Moreover, nanocomposite material characterization using some commonly used analytical techniques, such as electron microscopy, spectroscopy, diffraction patterns etc., has been highlighted in this review. Biomaterial physical properties, such as pore size, porosity, particle size, and mechanical strength which strongly influences cell attachment, proliferation, and subsequent tissue growth has been covered in this review. This review has been sculptured around a case by case basis of current research that is being undertaken in the field of bone regeneration engineering. The nanofillers induced into the polymeric matrix render important properties, such as large surface area, improved mechanical strength as well as stability, improved cell adhesion, proliferation, and cell differentiation. The selection of nanocomposites is thus crucial in the analysis of viable treatment strategies for bone tissue regeneration for specific bone defects such as craniofacial defects. The effects of growth factor incorporation on the nanocomposite for controlling new bone generation are also important during the biomaterial design phase.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Achievements in the Topographic Design of Commercial Titanium Dental Implants: Towards Anti-Peri-Implantitis Surfaces

Titanium and its alloys constitute the gold standard materials for oral implantology in which their performance is mainly conditioned by their osseointegration capacity in the host's bone. We aim to provide an overview of the advances in surface modification of commercial dental implants analyzing and comparing the osseointegration capacity and the clinical outcome exhibited by different surfaces. Besides, the development of peri-implantitis constitutes one of the most common causes of implant loss due to bacteria colonization. Thus, a synergic response from industry and materials scientists is needed to provide reliable technical and commercial solutions to this issue. The second part of the review focuses on an update of the recent findings toward the development of new materials with osteogenic and antibacterial capacity that are most likely to be marketed, and their correlation with implant geometry, biomechanical behavior, biomaterials features, and clinical outcomes.

Grafting versus Crosslinking of Silk Fibroin-g-PNIPAM via Tyrosine-NIPAM Bridges

This paper reports the synthesis and complex characterization of novel polymeric networks based on the crosslinking of Bombyx mori silk fibroin via poly(N-isopropylacrylamide) bridges generated by an ammonium cerium nitrate redox system. The research study gives an understanding of the polymerization mechanism in terms of the generation of radical sites, radical growth and termination reaction, as well as the involvement of modifications on silk fibroin structure and properties. The physico-chemical characterization was carried out by FTIR-ATR, X-ray photoelectron spectroscopy and RAMAN spectroscopy with unravelling the chemical modification. The structural characterization and spatial arrangement by secondary structure were carried out by X-ray diffraction and circular dichroism. The thermal behavior and thermal stability were evaluated by differential scanning calorimetry and thermogravimetric analysis. The novel complex polymer network is intended to be used in the field of smart drug delivery systems.

Antioxidant-antibacterial containing bi-layer scaffolds as potential candidates for management of oxidative stress and infections in wound healing

Tissue engineering techniques are continuously evolving towards providing better microenvironment along with therapeutic potential to address the skin tissue defects. Factors such as microbial infections, presence of excessive free radicals and depletion in antioxidant based scavenging systems pose serious challenges by prolonging inflammation and delaying the repair process. Incorporation of bioactive molecules in polymer based biomimetic scaffolds may present new vistas for handling chronic wounds. In this study, chitosan/collagen scaffolds incorporating 0.5, 1 and 2% (w/w) silymarin (CS-CO-SM) were synthesized and studied for their biocompatibility, in vitro release kinetics and anti-oxidant activity. The release kinetics of silymarin from the CS-CO-SM scaffold showed an initial burst followed by sustained release. The scaffolds were biocompatible and supported the recovery of COS-7 cells from UV induced oxidative stress. Further the CS-CO-SM₍₂₎ scaffolds were used to fabricate a bi-layer scaffold by layer upon layer arrangement with CS-Ag3 (3% Ag, w/w). The Ag was incorporated to impart antimicrobial property to the scaffold. The in vivo studies on bi-layer scaffolds were carried out in Wistar rat models at 3, 7 and 10 days post injury and the skin excisions were studied for wound contraction, histology (H&E staining), and lipid peroxidation. The bi-layer scaffold accelerated the process of wound healing with no inflammatory cells, proliferation of fibroblast, neovascularization and collagen deposition. By day 10 post transplantation of the scaffold, the skin had a structure similar to normal skin with complete re-epithelization. This bi-layer scaffold with antioxidant and antimicrobial properties promotes wound healing and is proposed as a potential tissue engineering material for managing chronic wounds.

[Current trends of the choice and processing of materials for dental implantation]

For assessment of the modern situation about the choice of materials for manufacture of dental implants and the processing of their surface the scientific literature for the last 2 years was study. On the basis of a large number of contradictory results of the researches devoted to each of dental implantation problems it is possible to draw a conclusion that any of primal problems of implantology is finally not solved. There is no unique opinion at the choice of optimum material for manufacture of dental implants, at the way of processing and modification of their surface. The problem of improvement of quality of dental implantation and fight against complications of this procedure cannot be solved simple drawing other substances on the implanted material surface, this task more easily and more successfully is solved via changes of product structure and various modification of implant surface. Up to the present the researches of an opportunity to influence on characteristics of the implanted materials, changing their structure and character of a surface, continue. And the publications reporting about the considerable positive effect of artificially created roughnesses on product surfaces, and the articles claiming that there are no big differences between the rough and polished implants are confirmed by objective measurements with statistical processing of the obtained data. It should be noted that among articles there are very many works of the doubtful plan or with insufficiently valid conclusions. This review leads to the conclusion that further clinical and experimental studies and about the choice of materials for manufacture of implants and at the ways of processing of their surface are necessary.

Effects of silica-gentamicin nanohybrids on osteogenic differentiation of human osteoblast-like SaOS-2 cells

INTRODUCTION

In recent years, there has been an increasing interest in silica (SiO2) nanoparticles (NPs) as drug delivery systems. This interest is mainly attributed to the ease of their surface functionalization for drug loading. In orthopedic applications, gentamicin-loaded SiO2 NPs (nanohybrids) are frequently utilized for their prolonged antibacterial effects. Therefore, the possible adverse effects of SiO2-gentamicin nanohybrids on osteogenesis of bone-related cells should be thoroughly investigated to ensure safe applications.

MATERIALS AND METHODS

The effects of SiO2-gentamicin nanohybrids on the cell viability and osteogenic differentiation of human osteoblast-like SaOS-2 cells were investigated, together with native SiO2 NPs and free gentamicin.

RESULTS

The results of Cell Count Kit-8 (CCK-8) assay show that both SiO2-gentamicin nanohybrids and native SiO2 NPs reduce cell viability of SaOS-2 cells in a dose-dependent manner. Regarding osteogenesis, SiO2-gentamicin nanohybrids and native SiO2 NPs at the concentration range of 31.25-125 μg/mL do not influence the osteogenic differentiation capacity of SaOS-2 cells. At a high concentration (250 μg/mL), both materials induce a lower expression of alkaline phosphatase (ALP) but an enhanced mineralization. Free gentamicin at concentrations of 6.26 and 9.65 μg/mL does not significantly influence the cell viability and osteogenic differentiation capacity of SaOS-2 cells.

CONCLUSIONS

The results of this study suggest that both SiO2-gentamicin nanohybrids and SiO2 NPs show cytotoxic effects to SaOS-2 cells. Further investigation on the effects of SiO2-gentamicin nanohybrids on the behaviors of stem cells or other regular osteoblasts should be conducted to make a full evaluation of the safety of SiO2-gentamicin nanohybrids in orthopedic applications.

From Nano to Micro: using nanotechnology to combat microorganisms and their multidrug resistance

The spread of antibiotic resistance and increasing prevalence of biofilm-associated infections is driving demand for new means to treat bacterial infection. Nanotechnology provides an innovative platform for addressing this challenge, with potential to manage even infections involving multidrug-resistant (MDR) bacteria. The current review summarizes recent progress over the last 2 years in the field of antibacterial nanodrugs, and describes their unique properties, mode of action and activity against MDR bacteria and biofilms. Biocompatibility and commercialization are also discussed. As opposed to the more common division of nanoparticles (NPs) into organic- and inorganic-based materials, this review classifies NPs into two functional categories. The first includes NPs exhibiting intrinsic antibacterial properties and the second is devoted to NPs serving as a cargo for delivering antibacterial agents. Antibacterial nanomaterials used to decorate medical devices and implants are reviewed here as well.

Protein-Based Drug-Delivery Materials

There is a pressing need for long-term, controlled drug release for sustained treatment of chronic or persistent medical conditions and diseases. Guided drug delivery is difficult because therapeutic compounds need to survive numerous transport barriers and binding targets throughout the body. Nanoscale protein-based polymers are increasingly used for drug and vaccine delivery to cross these biological barriers and through blood circulation to their molecular site of action. Protein-based polymers compared to synthetic polymers have the advantages of good biocompatibility, biodegradability, environmental sustainability, cost effectiveness and availability. This review addresses the sources of protein-based polymers, compares the similarity and differences, and highlights characteristic properties and functionality of these protein materials for sustained and controlled drug release. Targeted drug delivery using highly functional multicomponent protein composites to guide active drugs to the site of interest will also be discussed. A systematical elucidation of drug-delivery efficiency in the case of molecular weight, particle size, shape, morphology, and porosity of materials will then be demonstrated to achieve increased drug absorption. Finally, several important biomedical applications of protein-based materials with drug-delivery function-including bone healing, antibiotic release, wound healing, and corneal regeneration, as well as diabetes, neuroinflammation and cancer treatments-are summarized at the end of this review.

Naturally derived proteins and glycosaminoglycan scaffolds for tissue engineering applications

Tissue engineering (TE) aims to mimic the complex environment where organogenesis takes place using advanced materials to recapitulate the tissue niche. Cells, three-dimensional scaffolds and signaling factors are the three main and essential components of TE. Over the years, materials and processes have become more and more sophisticated, allowing researchers to precisely tailor the final chemical, mechanical, structural and biological features of the designed scaffolds. In this review, we will pose the attention on two specific classes of naturally derived polymers: fibrous proteins and glycosaminoglycans (GAGs). These materials hold great promise for advances in the field of regenerative medicine as i) they generally undergo a fast remodeling in vivo favoring neovascularization and functional cells organization and ii) they elicit a negligible immune reaction preventing severe inflammatory response, both representing critical requirements for a successful integration of engineered scaffolds with the host tissue. We will discuss the recent achievements attained in the field of regenerative medicine by using proteins and GAGs, their merits and disadvantages and the ongoing challenges to move the current concepts to practical clinical application.

Poly (fumaroyl bioxirane) maleate: A potential functional scaffold for bone regeneration

Proper scaffolds combined with mesenchymal stem cells (MSCs) represent a promising strategy for repairing bone defects. In a previous study, poly (fumaroyl bioxirane) maleate (PFM), a newly developed functional polymer with numerous functional groups, exhibited excellent biocompatibility and enhanced the alkaline phosphatase (ALP) activity of osteoblasts in vitro. Here, to provide further and comprehensive insight into the application of PFM in bone tissue engineering, we investigated the osteoinductive potential of PFM cultured with rat adipose-derived mesenchymal stem cells (rADSCs). The results showed that PFM resulted in greater proliferation of rADSCs and that the PFM substrate had stronger osteoinductivity than PLGA and the control, as indicated by the significant upregulation of osteogenesis-related genes, proteins and calcium mineralization in vitro. Next, PFM was combined with rADSCs to repair a critical-sized calvarial defect in rats. Compared to the PLGA scaffold, the PFM scaffold significantly promoted new bone formation and exhibited excellent effects in repairing rat calvarial defects. In conclusion, PFM possesses strong osteoinductivity, which could markedly enhance bone regeneration, suggesting that PFM could serve as a promising and effective optimization method for traditional scaffolds in bone regeneration.

Regulating the gaps between folds on the surface of silk fibroin membranes via LBL deposition for improving their biomedical properties

Silk fibroin (SF) has become a promising biomaterial in guided bone regeneration (GBR). In an attempt to modify the size of the gaps on the surface of SF barrier membrane and improve its antibacterial activity, biological and mechanical properties, positively charged Lysozyme (LY)-Collagen Type-I (COL) composites and negatively charged SF were introduced to the negatively charged surface of SF substrates utilizing the electrostatic layer-by-layer (LBL) self-assembly technique. The morphology, chemical structures and element content of the LBL structured membranes were investigated. The results suggested that LY and COL were successfully assembled and the gaps between the folds on the surface of the membranes became smaller gradually with the increase of coated film numbers. Besides, the content of β-sheets of the membranes increased after deposition, which indicated the improvement of their mechanical properties. Moreover, the results of the measurement of immobilized LY and antibacterial assay not only revealed that the enzymatic catalysis and antibacterial activity of the samples enhanced with the increase of coated bilayer numbers but also implied that LBL modified membranes had better antibacterial activity when LY-COL was on the outermost layer. Furthermore, CCK-8 assay certified both SF membrane and LBL structured membranes could facilitate cell growth and proliferation, and the introduction of COL could further promote this ability. Finally, cell attachment and morphology examination provided intuitional evidence that SF membrane and LBL modified membranes have excellent biocompatibility.