Characterization of condensed tannins and carbohydrates in hot water bark extracts of European softwood species

Effect of Technological Factors on the Extraction of Polymeric Condensed Tannins from Acacia Species

The aim of this research work was to investigate the influence of parameters such as particle size, mass/solvent ratio, temperature and spray drying on the tannin extraction process in order to develop cost-effective methods with better environmental and structural performance. The pods of Acacia nilotica ssp. tomentosa (ANT) were fractionated into three fractions, coarse fraction (C) (>2 mm), medium fraction (M) (1-2 mm), and fine fraction (F) < 1 mµ), and extracted with different water-to-pod ratios (2:1, 4:1 and 6:1) at different temperatures (30, 50 and 70 °C). The best results were scaled up using the three fractions of ANT, its bark and the bark of Acacia seyal var. seyal (ASS). Part of their extract was spray dried. The tannin content and total polyphenolic materials were evaluated using standard methods. Their adhesives were tested for their tensile strength. Tannins of ASS were characterized by 13C NMR and MALDI-TOF. The results revealed that the fine fraction (F) gave the highest percentage of tannins in both small and scaled-up experiments. The results of the tensile strength conformed to the European standard. The 13C NMR spectra of ANT and ASS showed that the bark contained condensed tannins mainly consisting of procyanidins/prodelphinidin of 70%/30% and 60%/40%, respectively. MALDI-TOF spectra confirmed the results obtained by 13C NMR and detailed the presence of flavonoid monomers and oligomers, some of which were linked to short carbohydrate monomers or dimers.

Phytochemical Characterization, Antioxidant, and Antimicrobial Activity of the Vegetative Buds from Romanian Spruce, Picea abies (L.) H. Karst

This study aims to investigate the vegetative buds from Picea abies (spruce), naturally found in a central region of Romania, through a comprehensive analysis of the chemical composition to identify bioactive compounds responsible for pharmacological properties. Using HPLC/derivatization technique of GC-MS and quantitative spectrophotometric assays, the phenolic profile, and main components of an ethanolic extract from the buds were investigated. The essential oil was characterized by GC-MS. Moreover, the antioxidant activity with the DPPH method, and the antimicrobial activity were tested. Heavy metal detection was performed by graphite furnace atomic absorption spectrometry. The main components of the alcoholic extract were astragalin, quercetin, kaempferol, shikimic acid, and quinic acid. A total content of 25.32 ± 2.65 mg gallic acid equivalent per gram of dry plant (mg GAE/g DW) and of 10.54 ± 0.083 mg rutin equivalents/g of dry plant (mg RE/g DW) were found. The essential oil had D-limonene, α-cadinol, δ-cadinene, 13-epimanool, and δ-3-carene as predominant components. The spruce vegetative buds exhibited significant antioxidant activity (IC50 of 53 μg/mL) and antimicrobial effects against Staphylococcus aureus. Furthermore, concentrations of heavy metals Pb and Cd were below detection limits, suggesting that the material was free from potentially harmful contaminants. The results confirmed the potential of this indigenous species to be used as a source of compounds with pharmacological utilities.

FT-IR and HPLC analysis of silver fir (Abies alba Mill.) bark compounds from different geographical provenances

Fourier Transform Infrared Spectroscopy (FT-IR) and High-Performance Liquid Chromatography (HPLC) could be applied to study the provenance of wood, specifically the differentiation of wood resources, as well as the identification of chemical compounds that are connected to the changes that occur in wood as a result of drying treatments. To test this hypothesis, the bark of silver fir (Abies alba Mill.) from trees belonging to seven different geographical provenances was studied, using samples dried at three different temperatures (60, 80, and 100 °C). FT-IR spectroscopy revealed different band assignments in the mid-infrared region depending on fir provenances, whereas the vibrational bands of the biomass functional groups tended to shift to lower wavenumbers. Significant differences were identified between the chemical compounds in the bark depending on the provenances. The largest proportion of the total phenolics was represented by the epicatechin gallate, epicatechin, catechin, and procyanidin dimer B1. Exploratory data analysis was performed using principal component analysis (PCA), hierarchical clustering, and Pearson correlations. This allowed a comparative evaluation of the samples and interpret the findings according to the geographical provenances, respectively ecological conditions in the areas of origin, but also the influence of the drying temperatures of the samples on chemical compounds. The precipitation in the areas of origin decreased total phenolics in silver fir bark samples, and total phenolics differed not only due to the geographic provenance, but also due to drying temperature.

Characterization of a composite based on Cissus dinklagei tannin resin

The tannin extract of Cissus dinklagei was used in the preparation of a 3 % paraformaldehyde resin for the manufacture of particleboard. This tannin is of the procyanidin type associated with furan residues. The modulus of elasticity of the resin obtained after the thermomechanical analysis is 3825 MPa. The TGA performed on the panels obtained shows three degradation zones with a thermal stability zone between 74 and 210 °C. These panels have good thermomechanical properties. The values of the best density, internal bond, modulus of elasticity in flexion (MOE) and resistance to flexion (MOR) are respectively 658 kg/m3; 0.52 MPa; 2035.4 MPa; 16.3 MPa. These results classify this panel for generalinterior construction and furniture uses according to the NF EN 312 standard.

Phytochemistry, Biological, and Pharmacological Properties of Abies alba Mill

Abies alba Mill. (Pinaceae), silver fir, is a widespread gymnosperm species in Europe, important for its ecological, economic, social, and cultural significance, as well as for its use for food and bioremediation purposes. The various parts of the plant (leaves, branches, cones, wood, bark) are also of pharmaceutical interest due to their composition of active compounds. In the last three decades, an impressive amount of research has been dedicated to this species. The variability of the chemical composition of essential oils (whether they come from leaves, oleoresin from branches, or other parts of the plant) is impressive, even in the case of specimens collected from the same geographical area. For essential oils prepared from needles or twigs and branches, limonene, β-pinene, α-pinene, camphene, β-phellandrene, and bornyl acetate are the leading compounds, although their wide variations seem to correspond to multiple chemotypes. Both bark and wood are rich in lignans and phenolic compounds. Matairesinol is apparently the dominant lignan in bark, and secoisolariciresinol and lariciresinol are the dominant ones in wood samples. Pharmacological studies with promising results have evaluated the antioxidant effect (mainly due to essential oils), but also the antimicrobial, antitumor, probiotic, antidiabetic, anti-steatosis, and anti-psoriatic activities.

Wood-Based Materials in Building

Wood is a widely used building material [...].

Production and Characterization of Hydrothermal Extracts of the Needles from Four Conifer Tree Species: Scots Pine, Norway Spruce, Common Juniper, and European Larch

Coniferous trees are the most dominant trees in Finland with a great economic value for pulp, paper, and timber making. Thus, their utilization also results in large quantities of residues, especially bark and needles. Tree needles are a rich source of bioactive compounds, which have a considerable utilization potential in different pharmaceutical or techno-chemical applications. In this study, hydrothermal extraction (HTE) of the needles from four conifer tree species, namely, Scots pine, Norway spruce, common juniper, and European larch, was performed. Besides water, ethanol was also used as a solvent to enhance extraction efficiency and selectivity. All of the HTE experiments were conducted with a customized high-pressure reactor operated at 120 °C and 5 bar. The obtained needle extracts were then analyzed using a direct-infusion ultrahigh-resolution Fourier transform ion cyclotron (FT-ICR) mass spectrometry. The FT-ICR analysis of water and ethanol extracts allowed identification of over 200 secondary plant metabolites, including monosaccharides, organic acids, terpenoids, a variety of phenolic compounds, and nitrogen alkaloids. The use of ethanol as the extraction solvent considerably enhanced the recovery of lipids, especially terpenoids, some polyphenols, and other unsaturated hydrocarbon species.

The Potential Value of Debarking Water as a Source of Polyphenolic Compounds for the Specialty Chemicals Sector

Forest-based industries produce huge quantities of bark during their primary processing activities. In Nordic pulp and paper industries, where a wet debarking process is used for bark removal, toxic debarking water and bark press water are produced as a by-product. However, polyphenols represent an important fraction of the debarking water and bark press water. These polyphenolic compounds are of commercial interest in chemical specialty sectors since polyphenols have been proven to have diverse health benefits, and after collecting them from waste sources, they can act as alternatives to oil-based chemicals. Determining the economic potential of polyphenolic compounds, identifying their molecular structure, and determining the antioxidant capacity of these compounds present in debarking water and bark can support the identification of their potential applications. The results show that water extractions from bark have a lower efficiency than (partial) alcoholic extractions. Nevertheless, a considerable amount of low-molecular polyphenolic compounds, which are of interest for high-end applications, was found in all extracts. Bark press water has a highly versatile range of polyphenolic compounds and showed some antioxidant activity, making it a great source for the collection of polyphenolic compounds, in contrast to debarking water, which had a much lower polyphenolic content and low antioxidant activity.

Comparison of the Content of Extractives in the Bark of the Trunk and the Bark of the Branches of Silver Fir (Abies alba Mill.)

The main objective of our study was to investigate the possible differences in the chemical composition of extractives from the bark of silver fir (Abies alba) with respect to the location of the bark sample on the tree, viz. differences in extract composition between stem bark and branch bark samples. Extractives in the bark samples from branches, depending on the distance of the sample from the trunk, were also analysed, and the stem bark samples were analysed with respect to their inner and outer parts. The results of the chemical analysis of extractives were supported by information about their antifungal and antioxidant effects. After felling and sampling silver fir trees, the collected bark samples were ground and freeze-dried. Extraction of bark samples was followed by a system of accelerated extraction using only water as a solvent. The extracts were analysed chemically using gravimetry, spectrophotometry and chromatography. Free-radical-scavenging activity was measured using the DPPH method, and the antifungal effect towards three moulds and three wood-decaying fungi was investigated with antifungal assay using the agar well diffusion method. It was found that the moisture content in bark samples decreased intensively just after the bark samples were peeled off the stem. Detailed chromatographic analysis showed that the bark extracts contained 14 compounds, among which phenolic acids, flavonoids and lignans were found to be the characteristic ones. The content of hydrophilic extractives in the branch bark samples decreased with increasing distance of the sample location from the tree stem. The largest amounts of phenolic extractives were measured in stem bark, followed by branch bark sampled at the point at which the branch entered the tree. Analysis of the separated parts of the bark showed that the outer layers of stem bark contained larger amounts of phenolic extractives, as well catechin and epicatechin, compared to the inner layers. Concentrated extracts of branch bark showed the largest free-radical-scavenging activity among the investigated samples, while strong antifungal effects of the bark extract were not found.

Improved Fire Retardancy of Cellulose Fibres via Deposition of Nitrogen-Modified Biopolyphenols

Driven by concerns over the health and environmental impacts of currently used fire retardants (FRs), recent years have seen strong demand for alternative safer and sustainable bio-based FRs. In this paper, we evaluated the potential of nitrogen-modified biopolyphenols as FRs for cellulosic natural fibres that could be used in low-density cellulose insulations. We describe the preparation and characterisation of nitrogen-modified lignin and tannin containing over 10% nitrogen as well as the treatment of cellulose pulp fibres with combinations of lignin or tannin and adsorption-enhancing retention aids. Combining lignin or tannin with a mixture of commercial bio-based flocculant (cationised tannin) and anionic retention chemical allowed for a nearly fourfold increase in lignin adsorption onto cellulosic pulp. The nitrogen-modified biopolyphenols showed significant improvement in heat release parameters in micro-scale combustion calorimetry (MCC) testing compared with their unmodified counterparts. Moreover, the adsorption of nitrogen-modified lignin or tannin onto cellulose fibres decreased the maximum heat release rate and total heat release compared with cellulose reference by 15-23%. A further positive finding was that the temperature at the peak heat release rate did not change. These results show the potential of nitrogen-modified biopolyphenols to improve fire-retarding properties of cellulosic products.

A Scoping Review on the Therapeutic Potential of Resin From the Species Larix decidua Mill. [Pinaceae] to Treat Ulcerating Wounds

Malignant ulcerating wounds or neoplastic lesions are a considerable burden for patients suffering from advanced cancer. These wounds have no effective treatment and are very difficult to manage. The present review summarizes evidence in support of a hypothesis put forward in anthroposophic medicine, which suggests a beneficial role of resin from the species Larix decidua Mill. [Pinaceae] for treating such wounds. A systematic search strategy was performed using the databases PubMed, EMBASE and SciFinder. The included publications described the chemical composition of this species, as well as in vitro, in vivo, and ex vivo experiments using plant extracts and isolated compounds. The results show that among the phytochemical classes, terpenoids were the major components of this species, especially in the resin. The summarized biological experiments revealed antimicrobial, antioxidant and anti-inflammatory effects, with promising potential for the extracts and isolated compounds. However, the molecular mechanisms and toxicological effects are as of yet not conclusively evaluated. From the data of our study, we can conclude that L. decidua might indeed have a promising potential for the treatment of malignant wounds, but definitive information that can prove its effectiveness is still lacking. We therefore suggest that future efforts should be dedicated to the evaluation of L. decidua resin's therapeutic use considering its antiseptic action and proposed wound healing properties.

Natural Antioxidant Evaluation: A Review of Detection Methods

Antioxidants have drawn the attention of the scientific community due to being related to the prevention of various degenerative diseases. The antioxidant capacity has been extensively studied in vitro, and different methods have been used to assess its activity. However, the main issues related to studying natural antioxidants are evaluating whether these antioxidants demonstrate a key role in the biological system and assessing their bioavailability in the organism. The majority of outcomes in the literature are controversial due to a lack of method standardization and their proper application. Therefore, this study aims to compile the main issues concerning the natural antioxidant field of study, comparing the most common in vitro methods to evaluate the antioxidant activity of natural compounds, demonstrating the antioxidant activity in biological systems and the role of the main antioxidant enzymes of redox cellular signaling and explaining how the bioavailability of bioactive compounds is evaluated in animal models and human clinical trials.

Extraction of Phenolic Compounds from Populus Salicaceae Bark

Lignocellulosic residues have the potential for obtaining high value-added products that could be better valorized if biorefinery strategies are adopted. The debarking of short-rotation crops yields important amounts of residues that are currently underexploited as low-grade fuel and could be a renewable source of phenolic compounds and other important phytochemicals. The isolation of these compounds can be carried out by different methods, but for attaining an integral valorization of barks, a preliminary extraction step for phytochemicals should be included. Using optimized extraction methods based on Soxhlet extraction can be effective for the isolation of phenolic compounds with antioxidant properties. In this study, poplar bark (Populus Salicaceae) was used to obtain a series of extracts using five different solvents in a sequential extraction of 24 h each in a Soxhlet extractor. Selected solvents were put in contact with the bark sample raffinate following an increasing order of polarity: n-hexane, dichloromethane, ethyl acetate, methanol, and water. The oily residues of the extracts obtained after each extraction were further subjected to flash chromatography, and the fractions obtained were characterized by gas chromatography coupled with mass spectrometry (GC-MS). The total phenolic content (TPC) was determined using the Folin-Ciocalteu method, and the antioxidant activity (AOA) of the samples was evaluated in their reaction with the free radical 2,2-Diphenyl-picrylhydrazyl (DPPH method). Polar solvents allowed for higher individual extraction yields, with overall extraction yields at around 23% (dry, ash-free basis). Different compounds were identified, including hydrolyzable tannins, phenolic monomers such as catechol and vanillin, pentoses and hexoses, and other organic compounds such as long-chain alkanes, alcohols, and carboxylic acids, among others. An excellent correlation was found between TPC and antioxidant activity for the samples analyzed. The fractions obtained using methanol showed the highest phenolic content (608 μg of gallic acid equivalent (GAE)/mg) and the greatest antioxidant activity.

Advanced materials design based on waste wood and bark

Trees belong to the largest living organisms on Earth and plants in general are one of our main renewable resources. Wood as a material has been used since the beginning of humankind. Today, forestry still provides raw materials for a variety of applications, for example in the building industry, in paper manufacturing and for various wood products. However, many parts of the tree, such as reaction wood, branches and bark are often discarded as forestry residues and waste wood, used as additives in composite materials or burned for energy production. More advanced uses of bark include the extraction of chemical substances for glues, food additives or healthcare, as well as the transformation to advanced carbon materials. Here, we argue that a proper understanding of the internal fibrous structure and the resulting mechanical behaviour of these forest residues allows for the design of materials with greatly varying properties and applications. We show that simple and cheap treatments can give tree bark a leather-like appearance that can be used for the construction of shelters and even the fabrication of woven textiles. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 1)'.

Extracts of pine bark (Pinus sylvestris) inhibit Cryptosporidium parvum growth in cell culture

The widespread apicomplexan parasite Cryptosporidium parvum is responsible for severe gastrointestinal disease in humans and animals. The treatment options are limited, and the efficacy of available drugs is low. Bark contains condensed tannins (CT), which are bioactive compounds previously shown to inhibit parasite development. Here, we examined the anti-cryptosporidial properties of bark extract of Scots pine (Pinus sylvestris) against C. parvum by means of an in vitro growth inhibition test. We hypothesised that bark extracts would have dose-dependent inhibitory effects on the development of C. parvum in cell culture.

Bark extracts from Scots pine extracted with acetone, methanol, and water as solvents were investigated using human colorectal adenocarcinoma cells infected with C. parvum. Oocysts were inoculated onto the cell monolayer and bark extract was added at seven different concentrations. Parasite growth inhibition was quantified by qPCR.

The acetone and methanol extracts demonstrated a sigmoid dose-dependent inhibition of C. parvum. The IC₅₀ values were 244.6 and 279.1 µg dry matter extract/mL, and 25.4 and 24.1 µg CT/mL, for acetone and methanol extracts, respectively. The IC₅₀ for both extracts were similar, both with regard to the dry matter concentration of each extract and to CT concentrations.

Given the limited treatment options available for Cryptosporidium spp., the evidence generated in our study encourages further investigation into the in vitro and in vivo effects of pine bark extracts against C. parvum.

ANALYSIS OF CARBOHYDRATES AND GLYCOCONJUGATES BY MATRIX-ASSISTED LASER DESORPTION/IONIZATION MASS SPECTROMETRY: AN UPDATE FOR 2015-2016

This review is the ninth update of the original article published in 1999 on the application of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings coverage of the literature to the end of 2016. Also included are papers that describe methods appropriate to analysis by MALDI, such as sample preparation techniques, even though the ionization method is not MALDI. Topics covered in the first part of the review include general aspects such as theory of the MALDI process, matrices, derivatization, MALDI imaging, fragmentation and arrays. The second part of the review is devoted to applications to various structural types such as oligo- and poly-saccharides, glycoproteins, glycolipids, glycosides and biopharmaceuticals. Much of this material is presented in tabular form. The third part of the review covers medical and industrial applications of the technique, studies of enzyme reactions and applications to chemical synthesis. The reported work shows increasing use of combined new techniques such as ion mobility and the enormous impact that MALDI imaging is having. MALDI, although invented over 30 years ago is still an ideal technique for carbohydrate analysis and advancements in the technique and range of applications show no sign of deminishing. © 2020 Wiley Periodicals, Inc.

In vitro antioxidant and antibacterial activities with polyphenolic profiling of wild cherry, the European larch and sweet chestnut tree bark

This study is a comparative investigation of antioxidant and antibacterial properties of tree bark extracts of three common European species, Prunus avium L., Larix decidua Mill. and Castanea sativa Mill. The bioactive compounds present in the bark were recovered in 80% aqueous ethanol using ultrasound as the green extraction method. The antioxidant potential of the extracts was assessed with multiple biochemical assays: total phenol content (TPC) expressed in gallic acid equivalent (GAE), 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) expressed in trolox equivalent (TE), and ferric reducing ability of plasma (FRAP) expressed in ascorbic acid equivalent (AAE). Sweet chestnut bark extract showed the highest antioxidant activity with TPC of 174.25 ± 16.95 mg GAE/g dry weight, DPPH (IC50) of 2.69 ± 0.03 μg/mL, ABTS of 739.65 ± 24.41 mg TE/g dry weight and FRAP of 207.49 ± 3.62 mg AAE/g dry weight. The antibacterial activity of the extracts was evaluated by disk diffusion test, minimal inhibitory concentration (MIC) assay and bacterial growth curves. Sweet chestnut bark extract gave IC50 values of 0.25 mg/mL and 1.00 mg/mL against E. coli and S. aureus, respectively. The polyphenolic profiling of the bark extracts was performed to identify the major compounds responsible for the bioactivities using high-performance liquid chromatography/tandem mass spectrometry (HPLC–MS/MS). The bark extracts were rich in natural antioxidants, thus holding tremendous potential for use as natural additives in food industry.

Graphic abstract

Chemical Analysis and Anthelmintic Activity Against Teladorsagia Circumcincta of Nordic Bark Extracts In vitro

Helminth parasitic infections are common in small ruminants in Norway; infection is usually treated with anthelmintic drugs, but anthelmintic resistance is an increasing problem. It is necessary to identify strategies to reduce the use of anthelmintic drugs and mitigate the impact of anthelmintic resistance. Condensed tannin (CT)-rich forages have been shown to reduce the helminth burden in small ruminants, but these forages have limited cultivation potential in Scandinavia. A good source for CT in cold climatic regions may be the bark of several commercially utilized tree species. In the present study, we determined the content and characterized the type of CT in bark extracts of pine (Pinus sylvestris L.), spruce (Picea abies L.), and birch (Betula pubescens). Extracts of selected bark samples were tested for their anthelmintic efficacy against the ovine infectious nematode Teladorsagia circumcincta. Total CT content was higher in the bark from younger (10–40 years old) pine and spruce trees; it decreased with tree age in pine, whereas it remained relatively stable in the bark of spruce and birch. Pine trees consisted of 100% procyanidins, whereas prodelphinins were present in most spruce (4–17%) and all birch samples (5–34%). Our studies clearly showed that there is variation in the anthelmintic activity of water and acetone extracts of bark samples collected from various sites around Norway, as this was measured with two independent in vitro assays, the egg hatch and larvae motility assays. The anthelmintic activity of some extracts was consistent between the two assays; for example, extracts from the three samples with the highest CT content showed very high activity in both assays, whereas the extract from the sample with the lowest CT content showed the lowest activity in both assays. For other extracts, activity was not consistent across the assays, which could be attributed to the susceptibility of the different stages of the parasitic life cycle. We demonstrated that bark extracts from commercially used trees in Scandinavia have the potential to be used as alternatives to anthelmintics. Further work should focus on refining the associations between bark extracts and anthelmintic activity to identify the best strategies to reduce the input of anthelmintic drugs in livestock production systems.

Tuning of Proanthocyanidin Extract's Composition through Quaternary Eutectic Solvents Extraction

Currently available proanthocyanidins extraction methods rely on dedicated crops and have low specificity and yield which limits their industrial application. Consequently, the development of novel methodologies and the use of sustainable sources is of great importance. Eutectic solvents have been proposed has good alternatives for conventional solvents due to their low price, easiness of preparation, biocompatibility and ability of being custom made to a specific application. Herein the effective extraction of proanthocyanidins from grape pomace and the possibility of tuning the extract's characteristics such as mean degree of polymerization and galloylation percentage is explored by means of varying the composition of a quaternary eutectic solvent composed by choline chloride, glycerol, ethanol and water. It was found that mean degree of polymerization values can vary from 6.0 to 7.37 and galloylation percentage can vary from 32.5% to 47.1% while maintaining extraction yield above 72.2 mg of proanthocyanidins per g of biomass. Furthermore, the increase of temperature up to 100 °C has showed a significant effect on the extraction yield being possible to increase it by 238% when compared to the conventional extraction method.

Specific Gravity of Inner and Outer Larch Bark

Larch bark is an interesting resource for the production of insulation panels. As it consists of a sugar-rich inner bark and an outer bark containing more durable components, there is the requirement to separate these compartments. Additionally, bark is often mixed with wooden pieces after industrial debarking processes. In this study, the wet density, dry density, and specific gravity of wood, whole bark, and inner and outer bark are investigated using the pycnometer method, which has been proven to be adequate for the volume measurement of irregularly shaped, light objects such as bark flakes. Soaked with water, the density of the inner bark is highest, followed by wood, and the lightest is the outer bark. Because of different moisture contents, the wet density is not directly comparable. The outer bark sucked up less water than the inner bark. Focusing on the specific gravity, the wood is the heaviest, followed by the outer bark and the inner bark. The differences are significant for both methods, displaying a promising physical basis for separation methods based on density differences. These might be a means to pick out more durable and less hygroscopic outer bark particles from a bark mixture in order to produce optimized bark composites.

Yield and compositions of bark phenolic extractives from three commercially significant softwoods show intra- and inter-specific variation

Tree bark is rich in commercially valuable secondary metabolites such as polyphenolic compounds like flavonoids and tannins. The yield and composition of bark extractives from Abies alba varies longitudinally within the stem. A. alba bark above the crown had the greatest extractive content, but the concentration of polyphenolic compounds was greatest below the crown. Here, we use a nonlinear model describing how bark extractive yields of A. alba, Picea abies and Pseudotsuga menziesii change with height, where differences among species are accounted for using different model coefficients. For all species there is longitudinal variability in extract yield. For P. abies and P. menziesii, the form of that variation differs depending on whether the bark was located at the same position in the stem as branches. Although the relationship form of total extractive yield differs between branched and un-branched samples, the relationship forms for individual compound yields does not change depending on branch presence. Despite trees from thinned stands having longer crowns and faster growth rates, indicative of greater photosynthetic activity, there was no evidence that thinning had affected either the yield or composition of extractives in these species. In P. abies, the proportions of flavonoids was higher in bark from the top of the tree, whereas epi-gallocatechin gallate was found in high proportions at the stem base. In P. menziesii bark extracts, taxifolin was the dominant compound, present in significantly higher proportions in bark towards the base of the stem.

Localization of (+)-Catechin in Picea abies Phloem: Responses to Wounding and Fungal Inoculation

To understand the positional and temporal defense mechanisms of coniferous tree bark at the tissue and cellular levels, the phloem topochemistry and structural properties were examined after artificially induced bark defense reactions. Wounding and fungal inoculation with Endoconidiophora polonica of spruce bark were carried out, and phloem tissues were frequently collected to follow the temporal and spatial progress of chemical and structural responses. The changes in (+)-catechin, (-)-epicatechin, stilbene glucoside, and resin acid distribution, and accumulation patterns within the phloem, were mapped using time-of-flight secondary ion mass spectrometry (cryo-ToF-SIMS), alongside detailed structural (LM, TEM, SEM) and quantitative chemical microanalyses of the tissues. Our results show that axial phloem parenchyma cells of Norway spruce contain (+)-catechins, the amount of which locally increases in response to fungal inoculation. The preformed, constitutive distribution and accumulation patterns of (+)-catechins closely follow those of stilbene glucosides. Phloem phenolics are not translocated but form a layered defense barrier with oleoresin compounds in response to pathogen attack. Our results suggest that axial phloem parenchyma cells are the primary location for (+)-catechin storage and synthesis in Norway spruce phloem. Chemical mapping of bark defensive metabolites by cryo-ToF-SIMS, in addition to structural and chemical microanalyses of the defense reactions, can provide novel information on the local amplitudes and localizations of chemical and structural defense mechanisms and pathogen-host interactions of trees.

Tannins of Conifer Bark as Nordic Piquancy-Sustainable Preservative and Aroma?

Bark of Norway spruce and Scots pine trees contain large amounts of condensed tannins. Tannins extracted with hot water could be used in different applications as they possess antioxidative and antimicrobial activities. The use of bark tannins as e.g., food preservatives calls for increases in our knowledge of their antioxidative activities when applied in foodstuffs. To assess the ability of bark tannins to prevent lipid oxidation, hot water extracts were evaluated in a liposome model. Isolated tannins were also applied in dry-cured, salty meat snacks either as liquid extracts or in dry-powder form. Consumer acceptance of the snacks was tested by a sensory evaluation panel where outlook, odor, taste, and structure of the snacks were evaluated and compared to a commercial product without tannin ingredients. Our results show that conifer bark tannin-rich extracts have high capacity to prevent lipid oxidation in the liposome model. The efficacies of pine and spruce bark extracts were ten to hundred folds higher, respectively, than those of phenolic berry extracts. The bark extracts did not significantly influence the odor or taste of the meat snacks. The findings indicate that bark extracts may be used as sustainable food ingredients. However, more research is needed to verify their safety.

Cascade processing of softwood bark with hot water extraction, pyrolysis and anaerobic digestion

A process model based on hot water extraction (HWE), slow pyrolysis and anaerobic digestion (AD) were used for pine and spruce bark utilisation. First tannins (32 mg/g and 11.8 mg/g, respectively) and polyphenols were recovered via HWE. Then, the residue was pyrolysed to produce biochar (marketable quality), gas (energy source) and liquid fractions. The liquid fraction was further separated into aqueous acidic fraction and to tar fraction. Bark, extracted bark residue and acidic liquid fraction from pyrolysis were treated in AD to produce biomethane and digestate. The methane yields from pine and spruce bark and extracted bark residue were low (from 42 to 96 mLCH4/gVSadded) and showed only small differences. In conclusion, cascade processing can improve the performance of subsequent single processes and utilise biomass sources with higher efficiency. The best processing chain may vary in different cases and the overall energy balance of processing needs further research.

Low-Cost Ru/C-Catalyzed Depolymerization of the Polymeric Proanthocyanidin-Rich Fraction from Bark To Produce Oligomeric Proanthocyanidins with Antioxidant Activity

A new method has been developed for the high-value utilization of larch bark, which is regarded as a low-value byproduct of the logging industry. Polymeric proanthocyanidins (PPCs) were extracted from the Larix gmelinii bark and depolymerized by catalytic hydrogenolysis, using ruthenium/carbon (Ru/C) as the catalyst. The method has been found that although the molecular weight of the depolymerized product was significantly lower, the basic structural units were not destroyed, and the product retained a condensed flavanol polyphenol structure; the depolymerized product contains very little Ru metal and thus complies with food safety standards; the antioxidant properties of both the depolymerized products and PPCs were better than those of the commonly used antioxidant 2,6-di-tert-butyl-4-methylphenol. The relative molecular weight and steric hindrance of the depolymerized products were lower than those of the PPCs, leading to better antioxidant performance. A new technical route for the depolymerization of PPCs from the L. gmelinii bark is provided. The route offers practical and commercial advantages, and the product could have many applications as an antioxidant.

Analysis of the antiparasitic and anticancer activity of the coconut palm (Cocos nucifera L. ARECACEAE) from the natural reserve of Punta Patiño, Darién

Cocos nucifera (C. nucifera) (the coconut palm tree) has been traditionally used to fight a number of human diseases, but only a few studies have tested its components against parasites such as those that cause malaria. In this study, C. nucifera samples were collected from a private natural reserve in Punta Patiño, Darien, Panama. The husk, leaves, pulp, and milk of C. nucifera were extracted and evaluated against the parasites that cause Chagas’ disease or American trypanosomiasis (Trypanosoma cruzi), leishmaniasis (Leishmania donovani) and malaria (Plasmodium falciparum), as well as against a line of breast cancer cells. While there was no activity in the rest of the tests, five and fifteen-minute aqueous decoctions of leaves showed antiplasmodial activity at 10% v/v concentration. Removal of some HPLC fractions resulted in loss of activity, pointing to the presence of synergy between the components of the decoction. Chemical molecules were separated and identified using an ultra-performance liquid chromatography (UPLC) approach coupled to tandem mass spectrometry (LC–MS/MS) using atmospheric pressure chemical ionization quadrupole–time of flight mass spectrometry (APCI–Q–TOF–MS) and molecular networking analysis, revealing the presence of compounds including polyphenol, flavone, sterol, fatty acid and chlorophyll families, among others.

Larix decidua Bark as a Source of Phytoconstituents: An LC-MS Study

Larix decidua bark is a waste of the timber industry and is widely diffused in Northern Italy. This material can be considered a good source of antioxidants and phytoconstituents with possible use in cosmetic or nutraceutical products. In this study, simple extraction of larch bark was performed using mixtures of ethanol/water. Furthermore, the phytochemical composition of larch bark extract was studied using LC-MSⁿ methods and the main constituents were identified as flavonoids, spiro-polyphenols, and procyanidins. To confirm the identification by LC-MS semi-preparative HPLC was performed in order to isolate the main constituents and verify the structures by ¹H-NMR. Antioxidant properties were studied using an in vitro approach combining DPPH assay and LC-MS in order to establish different roles of the various classes of phytochemicasl of the extract. DPPH activity of some of the isolated compounds was also assessed. The overall results indicate this waste material as a good source of antioxidant compounds, mainly procyanidins, whichresulted the most active constituents in the DPPH assay.

Removal of Water-Soluble Extractives Improves the Enzymatic Digestibility of Steam-Pretreated Softwood Barks

Softwood bark contains a large amounts of extractives—i.e., soluble lipophilic (such as resin acids) and hydrophilic components (phenolic compounds, stilbenes). The effects of the partial removal of water-soluble extractives before acid-catalyzed steam pretreatment on enzymatic digestibility were assessed for two softwood barks—Norway spruce and Scots pine. A simple hot water extraction step removed more than half of the water-soluble extractives from the barks, which improved the enzymatic digestibility of both steam-pretreated materials. This effect was more pronounced for the spruce than the pine bark, as evidenced by the 30 and 11% glucose yield improvement, respectively, in the enzymatic digestibility. Furthermore, analysis of the chemical composition showed that the acid-insoluble lignin content of the pretreated materials decreased when water-soluble extractives were removed prior to steam pretreatment. This can be explained by a decreased formation of water-insoluble “pseudo-lignin” from water-soluble bark phenolics during the acid-catalyzed pretreatment, which otherwise results in distorted lignin analysis and may also contribute to the impaired enzymatic digestibility of the barks. Thus, this study advocates the removal of extractives as the first step in the processing of bark or bark-rich materials in a sugar platform biorefinery.

Valorisation of softwood bark through extraction of utilizable chemicals. A review

Softwood bark is an important source for producing chemicals and materials as well as bioenergy. Extraction is regarded as a key technology for obtaining chemicals in general, and valorizing bark as a source of such chemicals in particular. In this paper, properties of 237 compounds identified in various studies dealing with extraction of softwood bark were described. Finally, some challenges and perspectives on the production of chemicals from bark are discussed.

Characterization and acid-catalysed depolymerization of condensed tannins derived from larch bark

Condensed tannins from larch bark extracts are a natural renewable and eco-friendly material and are potential substitutes for phenolic petrochemicals.