Water soluble sulfaguanidine based Schiff base as a “Turn-on” fluorescent probe for intracellular recognition of Zn2+ in living cells and exploration for biological activities

A Portable Zn2+ Fluorescence Sensor for Information Storage and Bio-Imaging in Living Cells

A fluorescence probe (Probe-ITR) was designed and synthesized for the rapid detection of Zn2+ based on the excited state intramolecular proton transfer (ESIPT) mechanism. The specific recognition ability of Probe-ITR to Zn2+ was tested using UV-VIS and fluorescence emission spectroscopy. The results demonstrated a rapid response within 40s upon addition of an appropriate amount of Zn2+ into the mixed solution of the target probe molecules (DMSO/PBS = 5/5). Under 365 nm ultraviolet light irradiation, the colorless solution changed to yellow-green fluorescence with a 150-folds increase in intensity. Furthermore, the detection limit for specific recognition of Zn2+ by the probe molecule is only 17.3 nmol/L, indicating high sensitivity. The practical application potential of the probe molecules was enhanced by employing on information storage and conducting cell imaging experiments.

Turn on Fluorescence Sensing of Zn2+ Based on Fused Isoindole-Imidazole Scaffold

Optical chemosensors caused a revolution in the field of sensing due to their high specificity, sensitivity, and fast detection features. Imidazole derivatives have offered promising features in the literature as they bear suitable donor/acceptor groups for the selective analytes in the skeleton. In this work, an isoindole-imidazole containing a Schiff base chemosensor (1-{3-[(2-Diethylamino-ethylimino)-methyl]-2-hydroxy-5-methyl-phenyl}-2H-imidazo[5,1-a]isoindole-3,5-dione) was designed and synthesized. The complete sensing phenomena have been investigated by means of UV-Vis, fluorescence, lifetime measurement, FT-IR, NMR and ESI-MS spectroscopic techniques. The optical properties of the synthesized ligand were investigated in 3:7 HEPES buffer:DMSO medium and found to be highly selective and sensitive toward Zn²⁺ ion through a fluorescence turn-on response with detection limit of 0.073 μm. Furthermore, this response is effective in gel form also. The competition studies reveal that the response of the probe for Zn²⁺ ion is unaffected by other relevant metal ions. The stoichiometric binding study was performed utilizing Job’s method which indicated a 1:1 sensor–Zn²⁺ ensemble. Computational calculations were performed to pinpoint the mechanism of sensing.

Design, Synthesis and Evaluation of Novel Antimicrobial Polymers Based on the Inclusion of Polyethylene Glycol/TiO2 Nanocomposites in Cyclodextrin as Drug Carriers for Sulfaguanidine

Polymers and their composites have recently attracted attention in both pharmaceutical and biomedical applications. Polyethylene glycol (PEG) is a versatile polymer extensively used in medicine. Herein, three novel PEG-based polymers that are pseudopolyrotaxane (PEG/α-CD) (1), titania–nanocomposite (PEG/TiO₂NPs) (2), and pseudopolyrotaxane–titania–nanocomposite (PEG/α-CD/TiO₂NPs) (3), were synthesized and characterized. The chemical structure, surface morphology, and optical properties of the newly materials were examined by FT-IR, ¹H-NMR, SEM, and UV–Vis., respectively. The prepared polymers were used as drug carriers of sulfaguanidine as PEG/α-CD/Drug (4), PEG/TiO₂NPs/Drug (5), and PEG/α-CD/TiO₂NPs/Drug (6). The influence of these drug-carrying formulations on the physical and chemical characteristics of sulfaguanidine including pharmacokinetic response, solubility, and tissue penetration was explored. Evaluation of the antibacterial and antibiofilm effect of sulfaguanidine was tested before and after loading onto the prepared polymers against some Gram-negative and positive bacteria (E. coli, Pseudomonas aeruginosa, and Staphylococcus aureus (MRSA)), as well. The results of this work turned out to be very promising as they confirmed that loading sulfaguanidine to the newly designed polymers not only showed superior antibacterial and antibiofilm efficacy compared to the pure drug, but also modified the properties of the sulfaguanidine drug itself.

A highly potential acyclic Schiff base fluorescent turn on sensor for Zn2+ ions and colorimetric chemosensor for Zn2+, Cu2+ and Co2+ ions and its applicability in live cell imaging

Herein, we report two acyclic Schiff base receptors CS-1 and CS-2 capable of being selective fluorescent turn on for Zn2+ions and colorimetric chemosensor for Zn2+, Cu2+, and Co2+ ions by showing a colour change from colourless to yellow in 1:1 ratio of acetonitrile and HEPES buffer (1:1, v/v, pH 7.4) without the interference from other metal ions screened (Cd2+, Hg2+, Sn2+, Ni2+, Cr3+, Mn2+, Pb2+, Ba2+, Al3+, Ca2+, Mg2+, K+ and Na+). The fluorescence turn on enhancement towards Zn2+ ions is ascribed to PET blocking, suppression of -C=N- isomerisation, and the ESIPT process. The selectivity, competitivity and reversibility of the synthesised probes (CS-1 and CS-2) made them promising chemosensors for the detection of Zn2+, Cu2+, and Co2+ ions. The density functional theory (DFT) calculations have theoretically endorsed the colorimetric changes in the examined absorption spectra and binding mode of both CS-1/CS-2 with metals ions. In addition, 1H NMR titrations were also consistent with the recognition mechanism of Zn2+ ions with the CS-1/CS-2. Further, the Jobs plot analysis infers a 1:1 stoichiometric ratio for both evaluating receptors CS-1 and CS-2 with Zn2+, Cu2+ and Co2+ ions and was supported by DFT, NMR (only for Zn2+ ions), UV-Visible, and fluorescence spectroscopic studies. Moreover, the detection limits of CS-1 and CS-2 for Zn2+ ions were determined to be 7.69 and 5.35 nM, respectively, which is less compared to the detection limit of Cu2+, Co2+ ions as well as the limit approved by the United State Environmental Protection Agency (US EPA). The probes CS-1 and CS-2 found to show high fluorescence quantum yields at pH = 7 during the titration with Zn2+ as compared with other pHs (5-6 and 8-11). Gratifyingly, fluorescence microscopy imaging in HeLa cells revealed that the pair of receptors can be employed as an excellent fluorescent probe for the detection of Zn2+ions in living cells, indicating that this facile chemosensor has a huge potential in cellular imaging.

Utilization and simulation of innovative new binuclear Co(ii), Ni(ii), Cu(ii), and Zn(ii) diimine Schiff base complexes in sterilization and coronavirus resistance (Covid-19)

This article aimed at the synthesis and molecular docking assessment of new diimine Schiff base ligand, namely 2-((E)-(2-((Z)-2-(4-chlorophenyl)-2-hydroxyvinyl)hydrazono) methyl)-6-methoxyphenol (methoxy-diim), via the condensation of 1-(4-chloro-phenyl)-2-hydrazino-ethenol compound with 2-((E)-(2-((Z)-2-(4-chlorophenyl)-2-hydroxy vinyl) hydrazono)methyl)-6-methoxyphenol in acetic acid as well as the preparation of new binuclear complexes of Co(ii), Ni(ii), Cu(ii), and Zn(ii). The following synthesized complexes were prepared in a ratio of 2:1 (metal/ligand). The 1H-NMR, UV-Vis, and FTIR spectroscopic data; molar conductivity measurements; and microanalytical, XRD, TGA/DTG, and biological studies were carried out to determine the molecular structure of these complexes. According to the spectroscopic analysis, the two central metal ions were coordinated with the diamine ligand via the nitrogen of the hydrazine and oxygen of the hydroxyl groups for the first metal ions and via the nitrogen of the hydrazine and oxygen of the phenol group for the second metal ions. Molecular docking for the free ligand was carried out against the breast cancer 3hb5-oxidoreductase and the 4o1v-protein binding kidney cancer and COVID-19 protease, and good results were obtained.

A highly selective pyridoxal-based chemosensor for the detection of Zn(ii) and application in live-cell imaging; X-ray crystallography of pyridoxal-TRIS Schiff-base Zn(ii) and Cu(ii) complexes

In a simple, one-step reaction, we have synthesized a pyridoxal-based chemosensor by reacting tris(hydroxymethyl)aminomethane (TRIS) together with pyridoxal hydrochloride to yield a Schiff-base ligand that is highly selective for the detection of Zn(ii) ion. Both the ligand and the Zn(ii) complex have been characterized by ¹H & ¹³C NMR, ESI-MS, CHN analyses, and X-ray crystallography. The optical properties of the synthesized ligand were investigated in an aqueous buffer solution and found to be highly selective and sensitive toward Zn(ii) ion through a fluorescence turn-on response. The competition studies reveal the response for zinc ion is unaffected by all alkali and alkaline earth metals; and suppressed by Cu(ii) ion. The ligand itself shows a weak fluorescence intensity (quantum yield, Φ = 0.04), and the addition of zinc ion enhanced the fluorescence intensity 12-fold (quantum yield, Φ = 0.48). The detection limit for zinc ion was 2.77 × 10⁻⁸ M, which is significantly lower than the WHO's guideline (76.5 μM). Addition of EDTA to a solution containing the ligand–Zn(ii) complex quenched the fluorescence, indicating the reversibility of Zn(ii) binding. Stoichiometric studies indicated the formation of a 2 : 1 L₂Zn complex with a binding constant of 1.2 × 10⁹ M⁻² (±25%). The crystal structure of the zinc complex shows the same hydrated L₂Zn complex, with Zn(ii) ion binding with an octahedral coordination geometry. We also synthesized the copper(ii) complex of the ligand, and the crystal structure showed the formation of a 1 : 1 adduct, revealing 1-dimensional polymeric networks with octahedral coordinated Cu(ii). The ligand was employed as a sensor to detect zinc ion in HEK293 cell lines derived from human embryonic kidney cells grown in tissue culture which showed strong luminescence in the presence of Zn(ii). We believe that the outstanding turn-on response, sensitivity, selectivity, lower detection limit, and reversibility toward zinc ion will find further application in chemical and biological science.

The synthesis, characterization, X-ray crystallography, and live-cell imaging of pyridoxal-TRIS Schiff-base ligand which is selective as a luminescence sensor to detect Zn(ii) ion, and the corresponding Zn(ii) and Cu(ii) complexes are described.

Fluorimetric Detection of Zn2+, Mg2+, and Fe2+ with 3-Hydroxy-4-Pyridylisoquinoline as Fluorescent Probe

The suitability of 3-hydroxy-4-pyridylisoquinoline to operate as fluorescent chemosensor for the detection of metal ions was investigated. For that purpose, the interactions of the title compound with selected metal ions were investigated by absorption and emission spectroscopy. The complexation of Zn²⁺, Fe²⁺, Mg²⁺ with 1:1 and 2:1 stoichiometry leads to characteristic optical responses that depend significantly on the employed solvents, thus allowing for the fluorimetric identification and detection of particular metal cations in a matrix-based pattern analysis or by fluorimetric titrations.

Two similar Schiff-base receptor based quinoline derivate: Highly selective fluorescent probe for Zn(II)

As is known, Zn²⁺ plays a vital role in a variety of biological processes but excessive exposure of Zn²⁺ to human beings can cause toxicity, inducing a series of overt poisoning symptoms and neurodegenerative disorders. Thus, we designed and synthesized two quinoline-derived Schiff-bases HL₁ and HL₂, and investigated the fluorescence emission responses of these two Schiff-bases to various metal ions. A significant enhancement in fluorescence emission band centered at 450 nm was observed in the ethanolic solution of HL₁ with addition of Zn²⁺, while remarkably lower fluorescence emission enhancement was obtained in the case of HL₂ in which one methyl group was introduced to the azomethine carbon. In addition, HL₁ showed good selectivity and high sensitivity towards Zn²⁺ in the existence of other various interfering metal ions, and the reversibility and regeneration of HL₁ were also perfect for extending its applications in environmental and biological systems. Therefore, HL₁ could be identified as a fluorescent probe for sensing Zn²⁺ environmentally and biologically.