Long term degradation of poly(ɛ-caprolactone) films in biologically related fluids

Choline Halide-Based Deep Eutectic Solvents as Biocompatible Catalysts for the Alternating Copolymerization of Epoxides and Cyclic Anhydrides

Aliphatic polyesters have received considerable attention in recent years due to their biodegradability and biocompatible, mechanical, and thermal properties that can make them a suitable alternative to today's commercialized polymers. The ring-opening copolymerization (ROCOP) of epoxides and cyclic anhydrides is a route to synthesize a diverse array of polyesters that could be useful in many applications. However, the catalysts used rarely consider biocompatible catalysts in the case that any are left in the polymer. To the best of our knowledge, we report the first example of using deep eutectic solvents (DESs) as biocompatible catalysts for this target ROCOP with polymerization activity for at least six diverse monomer pairs. Choline halide salts are active for this polymerization, with dried salts showing polymerization slower than that of those conducted in air. Hydrogen bonding with water is hypothesized to enhance the rate-determining step of epoxide ring opening. While the presence of water improves the rate of polymerization, it also acts as a chain transfer agent, leading to smaller molar mass polymers than intended. Combining the choline halide salts with urea or ethylene glycol hydrogen bond donors in air led to DES catalysts that reacted similarly to the salts exposed to air. However, when generating these DESs in air-free conditions, they showed similar rates of polymerization without a drop in polymer molar mass. The hydrogen bonding provided by urea and ethylene glycol seems to promote the rate increase without serving as a chain transfer agent. Results reported herein display the promising potential of biocompatible catalyst systems for this ROCOP process as well as introducing the use of hydrogen bonding to enhance polymerization rates.

Effects of Poloxamers as Excipients on the Physicomechanical Properties, Cellular Biocompatibility, and In Vitro Drug Release of Electrospun Polycaprolactone (PCL) Fibers

Electrospun microfibers are emerging as one of the advanced wound dressing materials for acute and/or chronic wounds, especially with their ability to carry drugs and excipients at a high loading while being able to deliver them in a controlled manner. Various attempts were made to include excipients in electrospun microfibers as wound dressing materials, and one of them is poloxamer, an amphiphilic polymer that exhibits wound debridement characteristics. In this study, we formulated two types of poloxamers (i.e., P188 and P338) at 30% (w/w) loading into electrospun polycaprolactone (PCL) fibers to evaluate their physicomechanical properties, biocompatibility, and in vitro drug release of a model drug. Our findings showed that the incorporation of poloxamers in the PCL solutions during electrospinning resulted in a greater "whipping" process for a larger fiber deposition area. These fibers were mechanically stiffer and stronger, but less ductile as compared to the PCL control fibers. The incorporation of poloxamers into electrospun PCL fibers reduced the surface hydrophobicity of fibers according to our water contact angle studies and in vitro degradation studies. The fibers' mechanical properties returned to those of the PCL control groups after "dumping" the poloxamers. Moreover, poloxamer-loaded PCL fibers accelerated the in vitro release of the model drug due to surface wettability. These poloxamer-loaded PCL fibers were biocompatible, as validated by MTT assays using A549 cells. Overall, we demonstrated the ability to achieve a high loading of poloxamers in electrospun fibers for wound dressing applications. This work provided the basic scientific understanding of materials science and bioengineering with an emphasis on the engineering applications of advanced wound dressings.

Toward regulating biodegradation in stages of polyurethane copolymers with bicontinuous microphase separation

For typical biodegradable polymers, their overall performance almost declines exponentially to the degradation degree, which inevitably leads to a dilemma between the requirements of service life and retention time in the environment (both in vitro and in vivo). It is a great challenge to develop a biodegradable polymeric device with relatively stable performance in service while rapidly degrading out of service. Herein, we demonstrate an effective strategy to control degradation of biodegradable polymers in stages by constructing separated bicontinuous microphases with very different microphase degradation rates. First, polyurethane copolymers (PCL-b-CrP-U) containing two blocks, i.e., semicrystalline poly(ε-caprolactone) (PCL) blocks and amorphous random copolymer blocks (CrP) based on ε-CL and p-dioxanone (PDO), were synthesized. The microscopic morphology of PCL-b-CrP-U is investigated by an alkali-accelerated degradation experiment, which also demonstrates that the chain cleavage-induced crystallization during degradation resulted in a self-reinforcement by forming degradation residues with a scaffold-like morphology. The tensile test shows that PCL-b-CrP-U has excellent mechanical properties (1500% of elongation at break, a tensile strength of about 7.5 MPa, and an elastic modulus of 40.0 MPa). The degradation experiments with artificial pancreatic juice as a working medium reveal that PCL-b-CrP-U samples containing relatively high PDO units exhibit a three-stage degradation, i.e. an induction stage, a steady degradation stage and an accelerated degradation stage. The CrP phase preferentially hydrolyzes to form some microchannels due to its amorphous nature and relatively high hydrophilicity, effectively accelerating the entry of water and enzymes into the inner parts of the sample. Meanwhile, at this stage, those originally amorphous PCL segments gradually crystalize owing to their enhanced chain mobility induced by the chain cleavage, forming a "scaffold"-like structure, which effectively reinforces the sample to resist the damage from external force and therefore guarantees a relatively stable mechanical performance of PCL-b-CrP-U during service. With the further depletion of the CrP phase, the intermediate "scaffold"-like structure is also very beneficial to accelerate the degradation of residues owing to its large specific surface area, which is expected to be beneficial for preventing long-term retention of the implantation devices.

Wet-Spun Polycaprolactone Scaffolds Provide Customizable Anisotropic Viscoelastic Mechanics for Engineered Cardiac Tissues

Myocardial infarction is a leading cause of death worldwide and has severe consequences including irreversible damage to the myocardium, which can lead to heart failure. Cardiac tissue engineering aims to re-engineer the infarcted myocardium using tissues made from human-induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) to regenerate heart muscle and restore contractile function via an implantable epicardial patch. The current limitations of this technology include both biomanufacturing challenges in maintaining tissue integrity during implantation and biological challenges in inducing cell alignment, maturation, and coordinated electromechanical function, which, when overcome, may be able to prevent adverse cardiac remodeling through mechanical support in the injured heart to facilitate regeneration. Polymer scaffolds serve to mechanically reinforce both engineered and host tissues. Here, we introduce a novel biodegradable, customizable scaffold composed of wet-spun polycaprolactone (PCL) microfibers to strengthen engineered tissues and provide an anisotropic mechanical environment to promote engineered tissue formation. We developed a wet-spinning process to produce consistent fibers which are then collected on an automated mandrel that precisely controls the angle of intersection of fibers and their spacing to generate mechanically anisotropic scaffolds. Through optimization of the wet-spinning process, we tuned the fiber diameter to 339 ± 31 µm and 105 ± 9 µm and achieved a high degree of fidelity in the fiber structure within the scaffold (fiber angle within 1.8° of prediction). Through degradation and mechanical testing, we demonstrate the ability to maintain scaffold mechanical integrity as well as tune the mechanical environment of the scaffold through structure (Young’s modulus of 120.8 ± 1.90 MPa for 0° scaffolds, 60.34 ± 11.41 MPa for 30° scaffolds, 73.59 ± 3.167 MPa for 60° scaffolds, and 49.31 ± 6.90 MPa for 90° scaffolds), while observing decreased hysteresis in angled vs. parallel scaffolds. Further, we embedded the fibrous PCL scaffolds in a collagen hydrogel mixed with hiPSC-CMs to form engineered cardiac tissue with high cell survival, tissue compaction, and active contractility of the hiPSC-CMs. Through this work, we develop and optimize a versatile biomanufacturing process to generate customizable PCL fibrous scaffolds which can be readily utilized to guide engineered tissue formation and function.

Chemical Upcycling of Poly(ε-caprolactone) to Valuable Chemical via TBD-Catalyzed Efficient Methanolysis Strategy

As a petroleum-derived polyester material, poly(ε-caprolactone) (PCL) plays an essential role in biomedical field due to its excellent biocompatibility and non-toxicity. With the increasing use of PCL in recent years, its waste disposal has become a significant challenge. To address this challenge, we demonstrate a high-efficiency organocatalysis strategy for the chemical upcycling of PCL to valuable chemical. Among organocatalysts explored in this article, 1,5,7-triazabicyclo[4,4,0]dec-5-ene (TBD) shows superior performance for transforming end-of-life poly(ε-caprolactone) into highly value-added methyl 6-hydroxyhexanoate with quantitative conversion in a short time. The endwise unzipping depolymerization mechanism is corroborated by monitoring molecular weight during depolymerization process and 1 H NMR control experiments. Furthermore, this approach is also practicable for large-scale depolymerization for commercial PCL plastics, providing idea for promoting the sustainable development of PCL plastics.

New PCL/PEC Blends: In Vitro Cell Response of Preosteoblasts and Human Mesenchymal Stem Cells

In this study, new blends of PCL/PEC have been prepared in an easy manner by casting with the objective of obtaining new biomaterials to apply to tissue engineering and bone regeneration. The PCL/PEC blends obtained, together with neat polymer blends, were characterized by infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). This full characterization is the key to disentangle the miscibility, which means good compatibility, of the polymer blends used in this work. The addition of increasing amounts of PEC, has shown in the new biomaterials obtained, a remarkable improvement in relation with the mechanical properties (manageable materials) and above all, in terms of an increase in their hydrophilic character with respect to the PCL neat polymer. The improvement of all these properties is reflected in their biological properties. With these thoughts in mind, the blends obtained were tested through the assessment of several biological parameters such as cell viability, proliferation, and differentiation of both the MC3T3-E1 osteoblastic cell line and hMSCs to evaluate their cell response to different polymer membranes aimed at bone tissue regeneration. “In vitro” biocompatibility methods have been chosen rather than in vivo studies due to their lower cost, faster procedure time, and minimum ethical concerns, and because it was the first time that the biological effects of these blends were studied. The results show that the PCL/PEC blends obtained, with tunable properties in terms of hydrophilic character and hydrolytic degradation, may be regarded as good candidates to perform “in vivo” tests and check their real-life applicability for bone regeneration. The polymer acronym (the weight percentage in the sub index) is PCLx/PECy as noted in table one with the summary of compositions.

Current Applications of Polycaprolactone as a Scaffold Material for Heart Regeneration

Despite numerous advances in treatments for cardiovascular disease, heart failure (HF) remains the leading cause of death worldwide. A significant factor contributing to the progression of cardiovascular diseases into HF is the loss of functioning cardiomyocytes. The recent growth in the field of cardiac tissue engineering has the potential to not only reduce the downstream effects of injured tissues on heart function and longevity but also re-engineer cardiac function through regeneration of contractile tissue. One leading strategy to accomplish this is via a cellularized patch that can be surgically implanted onto a diseased heart. A key area of this field is the use of tissue scaffolds to recapitulate the mechanical and structural environment of the native heart and thus promote engineered myocardium contractility and function. While the strong mechanical properties and anisotropic structural organization of the native heart can be largely attributed to a robust extracellular matrix, similar strength and organization has proven to be difficult to achieve in cultured tissues. Polycaprolactone (PCL) is an emerging contender to fill these gaps in fabricating scaffolds that mimic the mechanics and structure of the native heart. In the field of cardiovascular engineering, PCL has recently begun to be studied as a scaffold for regenerating the myocardium due to its facile fabrication, desirable mechanical, chemical, and biocompatible properties, and perhaps most importantly, biodegradability, which make it suitable for regenerating and re-engineering function to the heart after disease or injury. This review focuses on the application of PCL as a scaffold specifically in myocardium repair and regeneration and outlines current fabrication approaches, properties, and possibilities of PCL incorporation into engineered myocardium, as well as provides suggestions for future directions and a roadmap toward clinical translation of this technology.

Cranberry proanthocyanidins composite electrospun nanofibers as a potential alternative for bacterial entrapment applications

The interaction between A-type interflavan bonds from cranberry proanthocyanidins (PAC) and surface virulence factors of extra-intestinal pathogenic Escherichia coli (ExPEC) was studied. Electrospun nanofibers (ESNF) were fabricated using PAC and polycaprolactone (PCL) solutions and their physical and chemical properties were characterized. The ability of PAC:PCL composite ESNF to interact with and entrap ExPEC strain 5011 (ExPEC-5011) was evaluated in vitro by plate culturing and when formulated as a biofilter and nanocoating. As a biofilter, the PAC:PCL ESNF exhibited a dose-dependent ability to entrap ExPEC-5011. Images from scanning electron and fluorescent microscopies revealed that ESNF sections with higher amounts of PAC led to higher bacterial entrapment. The effectiveness PAC:PCL ESNF to bind ExPEC when applied as a nanocoating was studied using ESNF-coated polyvinyl chloride intermittent catheter. Results indicate that ExPEC-5011 was entrapped well into the PAC:PCL ESNF coating on the catheter. Overall, our results suggest that incorporating the biomolecule PAC in ESNF is a potential means for applications requiring bacterial entrapment, such as biofunctionalization, biofiltration, and surface coating, among others.

Long-term efficacy and safety of 3D printed implant in patients with nasal septal deformities

PURPOSE

To investigate the long-term safety and efficacy of a 3D-printed bioresorbable polycaprolactone (PCL) nasal implant for nasal septal deformity reconstruction.

METHODS

Fourteen patients who had undergone nasal septum reconstruction surgery using 3D-printed PCL nasal septal implants were enrolled. The primary outcome was the change in total Nasal Obstruction Symptom Evaluation (NOSE) scale scores between postoperative 3 months and current status (3.59 ± 0.51 years). The secondary outcomes were changes in the minimum cross-sectional area (MCA) and volume of both nasal cavities based on acoustic rhinometry, the cross-sectional area of the ostiomeatal unit, and the nasal septum angle of the paranasal sinus (PNS) in computed tomography (CT) images, and a visual analog scale (VAS) of the patients' subjective satisfaction.

RESULTS

The results showed no significant changes in the MCAs (Cohen's d:0.09; p = 0.711) or nasal volume (Cohen's d:0.26; p = 0.356), the area of the ostiomeatal unit (Cohen's d:0.49; p = 0.064), septum angles (Cohen's d:0.18; p = 0.831), the NOSE scale (Cohen's d:0.14; p = 0.621), or patients' subjective satisfaction (Cohen's d:0.52; p = 0.076) during the follow-up period.

CONCLUSIONS

This homogeneous composite microporous PCL nasal septal implant demonstrated long-term clinical efficacy and safety in human tissues that required maintenance of mechanical strength. Therefore, the indications for this implant could extend to various other craniofacial reconstructions in the future.

Electropsun Polycaprolactone Fibres in Bone Tissue Engineering: A Review

Regeneration of bone tissue requires novel load bearing, biocompatible materials that support adhesion, spreading, proliferation, differentiation, mineralization, ECM production and maturation of bone-forming cells. Polycaprolactone (PCL) has many advantages as a biomaterial for scaffold production including tuneable biodegradation, relatively high mechanical toughness at physiological temperature. Electrospinning produces nanofibrous porous matrices that mimic many properties of natural tissue extracellular matrix with regard to surface area, porosity and fibre alignment. The biocompatibility and hydrophilicity of PCL nanofibres can be improved by combining PCL with other biomaterials to form composite scaffolds for bone regeneration. This work reviews the most recent research on synthesis, characterization and cellular response to nanofibrous PCL scaffolds and the composites of PCL with other natural and synthetic materials for bone tissue engineering.

Pseudomonas taiwanensis biofilms for continuous conversion of cyclohexanone in drip flow and rotating bed reactors

In this study, the biocatalytic performance of a Baeyer-Villiger monooxygenase (BVMO) catalyzing the reaction of cyclohexanone to ε-caprolactone was investigated in Pseudomonas biofilms. Biofilm growth and development of two Pseudomonas taiwanensis VLB120 variants, Ps_BVMO and Ps_BVMO_DGC, were evaluated in drip flow reactors (DFRs) and rotating bed reactors (RBRs). Engineering a hyperactive diguanylate cyclase (DGC) from Caulobacter crescentus into Ps_BVMO resulted in faster biofilm growth compared to the control Ps_BVMO strain in the DFRs. The maximum product formation rates of 92 and 87 g m-2 d-1 were observed for mature Ps_BVMO and Ps_ BVMO_DGC biofilms, respectively. The application of the engineered variants in the RBR was challenged by low biofilm surface coverage (50-60%) of rotating bed cassettes, side-products formation, oxygen limitation, and a severe drop in production rates with time. By implementing an active oxygen supply mode and a twin capillary spray feed, the biofilm surface coverage was maximized to 70-80%. BVMO activity was severely inhibited by cyclohexanol formation, resulting in a decrease in product formation rates. By controlling the cyclohexanone feed concentration at 4 mM, a stable product formation rate of 14 g m-2 d-1 and a substrate conversion of 60% was achieved in the RBR.

Enhanced mesenchymal stem cells growth on antibacterial microgrooved electrospun zinc chloride/polycaprolactone conduits for peripheral nerve regeneration

In this study, we have investigated the effect of adding zinc chloride (ZnCl2) on polycaprolactone (PCL) before and after electrospinning. The rheological properties and conductivity of ZnCl2/PCL solutions were measured prior to the electrospinning process. The resultant electrospun mats were characterized by SEM, contact angle, FTIR, XRD, mechanical properties, as well as its antibacterial and stem cell proliferation assessment were tested. It was found that the fibers became finer by increasing the zinc salt content. Moreover, stability increased slightly up to 5% Zn-PCL and also the hydrophilicity has been enhanced by 52%. By adding ZnCl2, the degradation rate and mechanical properties were significantly increased. Also, the resultant mats have shown antibacterial properties against S. aureus than E. coli. From the stem cells proliferation study, it can be observed that by increasing ZnCl2, the stem cells proliferation was significantly increased. Grooved multichannel nerve conduits were successfully fabricated by rolling the electrospun mats produced on corn husks which has shown better cell alignment and attachment. Hence, adding zinc chloride is a facile biocompatible enhancement to polycaprolactone nanofibers to be used in nerve regeneration.

Advancement of Biomaterial-Based Postoperative Adhesion Barriers

Postoperative peritoneal adhesion (PPA) is a prevalent incidence that generally happens during the healing process of traumatized tissues. It causes multiple severe complications such as intestinal obstruction, chronic abdominal pain, and female infertility. To prevent PPA, several antiadhesion materials and drug delivery systems composed of biomaterials are used clinically, and clinical antiadhesive is one of the important applications nowadays. In addition to several commercially available materials, like film, spray, injectable hydrogel, powder, or solution type have been energetically studied based on natural and synthetic biomaterials such as alginate, hyaluronan, cellulose, starch, chondroitin sulfate, polyethylene glycol, polylactic acid, etc. Moreover, many kinds of animal adhesion models, such as cecum abrasion models and unitary horn models, are developed to evaluate new materials' efficacy. A new animal adhesion model based on hepatectomy and conventional animal adhesion models is recently developed and a new adhesion barrier by this new model is also developed. In summary, many kinds of materials and animal models are studied; thus, it is quite important to overview this field's current progress. Here, PPA is reviewed in terms of the species of biomaterials and animal models and several problems to be solved to develop better antiadhesion materials in the future are discussed.

The role of bioresorbable intraluminal airway stents in pediatric tracheobronchial obstruction: A systematic review

INTRODUCTION

Tracheal stenosis and tracheobronchomalacia are complicated, patient-specific diseases that can be treated with intraluminal stenting. Most commonly, silicone and metal stents are utilized, however, they pose significant early and late morbidity and are further complicated by growth of the airway in the pediatric population. Given recent improvements in materials science, there is a growing body of evidence suggesting a strong role for bioresorbable intraluminal stents in treating pediatric tracheobronchial obstruction.

METHODS

A PubMed.gov literature search was performed on December 3, 2019 and May 15, 2020, and a 2-researcher systematic review was performed following the PRISMA criteria. The following search query was utilized: (((((((bioresorbable) OR bioabsorbable) OR resorbable) OR absorbable) OR biodegradable AND airway) OR trachea) AND stent. A pooled statistical analysis was performed on all reported pediatric patients using SPSS software.

RESULTS

1369 publications were screened and 26 articles with original data were identified. Materials used included polydioxanone (PDO), poly-l-lactic acid (PLLA), polyglycolic acid/poly-l-lactide co-polymer with Proglactin 910 (Vicryl®-PDS®), polycaprolactone (PCL), magnesium alloys, and co-polymers in varying proportions. Twelve articles presented data on human subjects, 8 of which were case series and case reports on pediatric populations using polydioxanone (PDO) stents. Pooled statistical analysis demonstrated an average age of 19 months (range 0.25-144), 56.5% associated with a cardiovascular anomaly, and overall complication rate of 21.7%, with a stent fragment foreign body being the most common (8.7%), followed by significant granulation tissue (4.3%), stent migration (4.3%), and local stenosis (4.3%). Comparative analysis demonstrated short-term improvement (up to 1 month) has a statistically significant association with tracheobronchomalacia versus tracheal stenosis on chi-squared test (p = 0.001). The remaining analyses did not yield statistical significance.

CONCLUSION

The reported application of bioresorbable materials as intraluminal airway stents is positive. All comparative animal studies report biocompatibility and fewer morbidities compared to metal and silicone stents, however, in human studies there are concerns over the short interval of degradation and the potential for obstructive foreign bodies in poorly seated stents. Overall, there are clear, reproducible advantages to bioresorbable intraluminal stents in pediatric airway obstruction, as well as common pitfalls, that warrant further research.

Biomaterials to Prevent Post-Operative Adhesion

Surgery is performed to treat various diseases. During the process, the surgical site is healed through self-healing after surgery. Post-operative or tissue adhesion caused by unnecessary contact with the surgical site occurs during the normal healing process. In addition, it has been frequently found in patients who have undergone surgery, and severe adhesion can cause chronic pain and various complications. Therefore, anti-adhesion barriers have been developed using multiple biomaterials to prevent post-operative adhesion. Typically, anti-adhesion barriers are manufactured and sold in numerous forms, such as gels, solutions, and films, but there are no products that can completely prevent post-operative adhesion. These products are generally applied over the surgical site to physically block adhesion to other sites (organs). Many studies have recently been conducted to increase the anti-adhesion effects through various strategies. This article reviews recent research trends in anti-adhesion barriers.

Engineering and evaluation of forcespun functionalized carbon nano-onions reinforced poly (ε-caprolactone) composite nanofibers for pH-responsive drug release

Nanofibers and smart polymers are potentially fascinating biomaterials for the sustained release of therapeutic agents and tissue engineering applications. The current study describes a new class of pH-controlled polycaprolactone/mercaptophenyl methacrylate functionalized carbon nano-onions (PCL/f-CNOs) composite nanofibers by Forcespinning® (FS) with a sustained drug release profile. The morphology and structural characteristics of PCL/f-CNOs nanofibers were scrutinized by Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), respectively. The morphological results revealed that FS provided homogeneous and bead free nanofibers with average diameters from approximately 215 nm to 596 nm. PCL/f-CNOs composite fibers exhibited pH-responsive release of DOX over 15 days; pH 6.5 showed 87%, and pH 5.0 presented around 99% of DOX release. Drug release measurements showed that the π-π stacking interactions between DOX and f-CNOs have led to a controlled DOX release from forcespun PCL/f-CNOs fibers. Owing to the f-CNOs amalgamation, PCL/f-CNOs fibers unveiled enhanced tensile strength (3.16 MPa) as compared to pristine PCL fibers. It reveals the magnitude of colloidal stability and physisorption of f-CNOs within the PCL matrix. Besides, the in-vitro cell viability was measured with human fibroblast cells, and good viability was observed. Nevertheless, DOX embedded pH-responsive PCL/f-CNOs composite nanofibers may show potential applications in the biomedical research area.

Polycaprolactone as biomaterial for bone scaffolds: Review of literature

Bone tissue engineering using polymer based scaffolds have been studied a lot in last decades. Considering the qualities of all the polymers desired to be used as scaffolds, Polycaprolactone (PCL) polyester apart from being biocompatible and biodegradable qualifies to an appreciable level due its easy availability, cost efficacy and suitability for modification. Its adjustable physio-chemical state, biological properties and mechanical strength renders it to withstand physical, chemical and mechanical, insults without significant loss of its properties. This review aims to critically analyse the efficacy of PCL as a biomaterial for bone scaffolds.

3D Cytocompatible Composites of PCL/magnetite

A study of Magnetite (Fe₃O₄) as a suitable matrix for the improved adhesion and proliferation of MC3T3-E1 pre-osteoblast cells in bone regeneration is presented. Biodegradable and magnetic polycaprolactone (PCL)/magnetite (Fe₃O₄) scaffolds, which were fabricated by Thermally Induced Phase Separation, are likewise analyzed. Various techniques are used to investigate in vitro degradation at 37 °C, over 104 weeks, in a phosphate buffered saline (PBS) solution. Magnetic measurements that were performed at physiological temperature (310 K) indicated that degradation neither modified the nature nor the distribution of the magnetite nanoparticles. The coercive field strength of the porous matrices demonstrated ferromagnetic behavior and the probable presence of particle interactions. The added nanoparticles facilitated the absorption of PBS, with no considerable increase in matrix degradation rates, as shown by the Gel Permeation Chromatography (GPC) results for Mw, Mn, and I. There was no collapse of the scaffold structures that maintained their structural integrity. Their suitability for bone regeneration was also supported by the absence of matrix cytotoxicity in assays, even after additions of up to 20% magnetite.

Poly(ε-caprolactone-co-p-dioxanone): a Degradable and Printable Copolymer for Pliable 3D Scaffolds Fabrication toward Adipose Tissue Regeneration

The advancement of 3D printing technologies in the fabrication of degradable scaffolds for tissue engineering includes, from the standpoint of the polymer chemists, an urgent need to develop new materials that can be used as ink and are suitable for medical applications. Here, we demonstrate that a copolymer of ε-caprolactone (CL) with low amounts of p-dioxanone (DX) (15 mol %) is a degradable and printable material that suits the requirements of melt extrusion 3D printing technologies, including negligible degradation during thermal processing. It is therefore a potential candidate for soft tissue regeneration. The semicrystalline CL/DX copolymer is processed at a lower temperature than a commercial polycaprolactone (PCL), shaped as a filament for melt extrusion 3D printing and as porous and pliable scaffolds with a gradient design. Scaffolds have Young's modulus in the range of 60-80 MPa, values suitable for provision of structural support for damaged soft tissue such as breast tissue. SEM and confocal microscope indicate that the CL/DX copolymer scaffolds support adipose stem cell attachment, spreading, and proliferation.

Fabrication of Poly(L-Lactic Acid)/Chitosan Scaffolds by Solid-Liquid Phase Separation Method for Nerve Tissue Engineering: An In Vitro Study on Human Neuroblasts

Polymeric scaffolds that support neural cell behaviors are attracting more attention. In the present study, solid-liquid phase separation technique is used to fabricate scaffolds made of poly(L-lactic acid) (PLLA) and chitosan (CS) blends to mimic both cellular microenvironment and anatomical structure of nerve tissue. The fabricated scaffolds favor characteristics of both natural and synthetic polymers. Different tests and assays including physical and mechanical ones (in vitro degradation rate, free radical release, hydrophilicity, and porosity measurements, microstructure observation, and mechanical tests) and cellular assays (cell attachment measurement and viability assessment) suggest that blend scaffolds prepared with this method support nerve cells for tissue engineering applications adequately and even better than scaffolds prepared with the same method but from pure PLLA or CS.

Enhancing the Properties of Poly(ε-caprolactone) by Simple and Effective Random Copolymerization of ε-Caprolactone with p-Dioxanone

We have developed a straightforward strategy to obtain semicrystalline and random copolymers of ε-caprolactone (CL) and p-dioxanone (DX) with thermal stabilities similar to poly(ε-caprolactone), PCL, but with a faster hydrolytic degradation rate. CL/DX copolymers are promising inks when printing scaffolds aimed for tissue engineering. Such copolymers behave similar to PCL and resorb faster. The copolymers were synthesized by bulk ring-opening copolymerization, achieving a high yield; a molecular weight, M_n, of 57-176 kg mol^-1; and an inherent viscosity of 1.7-1.9 dL g^-1. The copolymer microstructure consisted of long CL blocks that are separated by isolated DX units. The block length and the melting point were a linear function of the DX content. The copolymers crystallize as an orthorhombic lattice that is typical for PCL, and they formed more elastic, softer, and less hydrophobic films with faster degradation rates than PCL. Relatively high thermal degradation temperatures (above 250 °C), similar to PCL, were estimated by thermogravimetric analysis, and copolymer filaments for three-dimensional printing and scaffolds were produced without thermal degradation.

Poly(furfuryl alcohol)-Polycaprolactone Blends

Poly(furfuryl alcohol) (PFA) is a bioresin synthesized from furfuryl alcohol (FA) that is derived from renewable saccharide-rich biomass. In this study, we compounded this bioresin with polycaprolactone (PCL) for the first time, introducing new functional polymer blends. Although PCL is biodegradable, its production relies on petroleum precursors such as cyclohexanone oils. With the method proposed herein, this dependence on petroleum-derived precursors/monomers is reduced by using PFA without significantly modifying some important properties of the PCL. Polymer blend films were produced by simple solvent casting. The blends were characterized in terms of surface topography by atomic force microscopy (AFM), chemical interactions between PCL and PFA by attenuated total reflection-Fourier transform infrared (ATR-FTIR), crystallinity by XRD, thermal properties by differential scanning calorimetry (DSC), and mechanical properties by tensile tests and biocompatibility by direct and indirect toxicity tests. PFA was found to improve the gas barrier properties of PCL without compromising its mechanical properties, and it demonstrated sustained antioxidant effect with excellent biocompatibility. Our results indicate that these new blends can be potentially used in diverse applications ranging from food packing to biomedical devices.

Chromatographic characterization of amphiphilic di- and tri-block copolymers of poly(ethylene oxide) and poly(ε-caprolactone)

Amphiphilic di- and tri-block copolymers based on poly(ethylene oxide) as a hydrophilic segment and poly(ε-caprolactone) as a hydrophobic part are synthesized by the ring-opening polymerization of ε-caprolactone while using poly(ethylene glycol)s and methoxy poly(ethylene glycol)s of varying molar masses as macro-initiators. The synthesized block copolymers are characterized with respect to their total relative molar mass and its distribution by size exclusion chromatography. Liquid chromatography at critical conditions of both blocks is established for the analysis of individual block lengths and tracking presence of unwanted homopolymers of both types in the block copolymer samples. New critical conditions of polycaprolactone on reversed phase column are reported using organic mobile phase. The established critical conditions of polycaprolactone extended the applicable molar mass range significantly compared to already reported critical conditions of polycaprolactone in aqueous mobile phase. Block copolymers are also analyzed at critical conditions of poly(ethylene glycol). Complete analysis of the di- and tri-block copolymers at corresponding critical conditions provided a fair estimate of molar mass of non-critical block besides information regarding presence of homopolymers of both types in the samples.

Electrospun Fibers as a Dressing Material for Drug and Biological Agent Delivery in Wound Healing Applications

Wound healing is a complex tissue regeneration process that promotes the growth of new tissue to provide the body with the necessary barrier from the outside environment. In the class of non-healing wounds, diabetic wounds, and ulcers, dressing materials that are available clinically (e.g., gels and creams) have demonstrated only a slow improvement with current available technologies. Among all available current technologies, electrospun fibers exhibit several characteristics that may provide novel replacement dressing materials for the above-mentioned wounds. Therefore, in this review, we focus on recent achievements in electrospun drug-eluting fibers for wound healing applications. In particular, we review drug release, including small molecule drugs, proteins and peptides, and gene vectors from electrospun fibers with respect to wound healing. Furthermore, we provide an overview on multifunctional dressing materials based on electrospun fibers, including those that are capable of achieving wound debridement and wound healing simultaneously as well as multi-drugs loading/types suitable for various stages of the healing process. Our review provides important and sufficient information to inform the field in development of fiber-based dressing materials for clinical treatment of non-healing wounds.

Biodegradable spirulina extract/polycaprolactone porous scaffolds

Hydrophilicity, pores with interconnected structures, and degradability are important properties of tissue engineering scaffolds.

Biological characteristic effects of human dental pulp stem cells on poly-ε-caprolactone-biphasic calcium phosphate fabricated scaffolds using modified melt stretching and multilayer deposition

Craniofacial bone defects such as alveolar cleft affect the esthetics and functions that need bone reconstruction. The advanced techniques of biomaterials combined with stem cells have been a challenging role for maxillofacial surgeons and scientists. PCL-coated biphasic calcium phosphate (PCL-BCP) scaffolds were created with the modified melt stretching and multilayer deposition (mMSMD) technique and merged with human dental pulp stem cells (hDPSCs) to fulfill the component of tissue engineering for bone substitution. In the present study, the objective was to test the biocompatibility and biofunctionalities that included cell proliferation, cell viability, alkaline phosphatase activity, osteocalcin, alizarin red staining for mineralization, and histological analysis. The results showed that mMSMD PCL-BCP scaffolds were suitable for hDPSCs viability since the cells attached and spread onto the scaffold. Furthermore, the constructs of induced hDPSCs and scaffolds performed ALP activity and produced osteocalcin and mineralized nodules. The results indicated that mMSMD PCL-BCP scaffolds with hDPSCs showed promise in bone regeneration for treatment of osseous defects.

FABRICATION AND CHARACTERIZATION OF ELECTROSPUN PLLA/COLLAGEN NANOFIBROUS SCAFFOLD COATED WITH CHITOSAN TO SUSTAIN RELEASE OF ALOE VERA GEL FOR SKIN TISSUE ENGINEERING

Background and aim: Healing of fire-induced wounds has been still a challenge in clinical issues. The aim of this study was to fabricate a nanofibrous poly (L-lactic acid)/collagen (PLLA/COL) scaffold with sustained release of aloe vera (AV) gel using a chitosan (CT)-coated layer for skin tissue engineering applications. Material and methods: Morphology, porosity, tensile strength, hydrophilicity, degradation rate, water vapor permeability and water uptake ratio of the scaffold were characterized. The behaviors of mouse fibroblasts (L929) were evaluated on the scaffold. Results: We observed that although the porosity of the scaffold was decreased, other characteristics were enhanced by coating a CT layer. The scaffold supports attachment, viability and proliferation of mouse fibroblasts. Conclusion: Consequently, the PLLA/COL scaffold coated with CT for sustained release of AV gel can be considered as a desirable scaffold for skin tissue engineering.

Comparative study of poly(L-lactic acid) scaffolds coated with chitosan nanoparticles prepared via ultrasonication and ionic gelation techniques

In this study, an attempt was made to develop bi-functional constructs serving both as scaffolds and potential delivery systems for application in neural tissue engineering. The constructs were prepared in two steps. In the first step, the bulks of poly (L-lactic acid) (PLLA) in 1, 4-dioxane/water (87:13) were fabricated using liquid-liquid thermally induced phase separation technique. In the next step, the prepared bulks were coated with chitosan nanoparticles produced by two different techniques of ultrasonication and ionic gelation by grafting-coating technique. In ultrasonication technique, the chitosan solution (2 mg/mL) in acetic acid/sodium acetate buffer (90:10) was irradiated by an ultrasound generator at 20 kHz and power output of 750 W for 100 s. In ionic gelation technique, the tripolyphosphate in water solution (1 mg/mL) was added to the same chitosan solution. The physicochemical properties of the products were characterized by Scanning Electron Microscopy, Attenuated Total Reflection Fourier Transform-Infrared, liquid displacement technique, contact angle measurement, compressive and tensile tests, as well as zeta potential and particle size analysis using dynamic light scattering. Moreover, the cell proliferation and attachment on the scaffolds were evaluated through human glioblastoma cell line (U-87 MG) and human neuroblastoma cell line [BE (2)-C] culture respectively. The results showed that the samples coated with chitosan nanoparticles prepared by ultrasonication possessed enhanced hydrophilicity, biodegradation and cytocompatibility compared with pure PLLA and PLLA coated with chitosan nanoparticles prepared by ionic gelation. This study suggests successful nanoparticles-scaffold systems which can act simultaneously as potential delivery systems and tissue engineering scaffolds.