Beta-sheet content significantly correlates with the biodegradation time of silk fibroin hydrogels showing a wide range of compressive modulus

Aloe vera-based biomaterial ink for 3D bioprinting of wound dressing constructs

This study emphasizes the development of a multifunctional biomaterial ink for wound healing constructs. The biomaterial ink benefits from Aloe vera's intrinsic biocompatible, biodegradable, antioxidant, antimicrobial, anti-inflammatory, and immunomodulatory attributes, thus alleviating the need for supplementary substances employed to combat infections and stimulate tissue regeneration. Moreover, this biomaterial ink seeks to address the scarcity of standardized printable materials possessing adequate biocompatibility and physicochemical properties, which hinder its widespread clinical adoption. The biomaterial ink was synthesized via ionic crosslinking to enhance its rheological and mechanical characteristics. The findings revealed that Aloe vera substantially boosted the hydrogel's viscoelastic behavior, enabling superior compressive modulus and the extrusion of fine filaments. The bioprinted constructs exhibited desirable resolution and mechanical strength while displaying a porous microstructure analogous to the native extracellular matrix. Biological response demonstrated no detrimental impact on stem cell viability upon exposure to the biomaterial ink, as confirmed by live/dead assays. These outcomes validate the potential of the developed biomaterial ink as a resource for the bioprinting of wound dressings that effectively foster cellular proliferation, thereby promoting enhanced wound healing by leveraging Aloe vera's inherent properties.

Evaluation of the Modification Effects of Heparin/Dalteparin on Silk Fibroin Structure and Physical Properties for Skin Wound Healing

We have developed a functionalized silk fibroin (BSF) that can serve as an improved fundamental material for dressings by specifically capturing growth factors secreted during the healing process and supplying them to cells accumulated in the wound area to enhance the tissue regeneration efficiency. When considering the design of heparin-modified BSF, there is a difficulty with binding to high-molecular-weight polysaccharides without disrupting the hydrophobic crystalline structure of the BSF. In this study, a low-molecular-weight pharmaceutical heparin, dalteparin, was selected and cross-linked with the tyrosine residue presence in the BSF non-crystalline region. When targeting 3D porous applications like nanofiber sheets, as it is crucial not only to enhance biological activity but also to improve handling by maintaining stability in water and mechanical strength, a trade-off between improved cell affinity and reduced mechanical strength depending on crystalline structure was evaluated. The use of dalteparin maintained the mechanical strength better than unfractionated heparin by reducing the effect on disturbing BSF recrystallization. Film surface hydrophilicity and cell proliferation induction were significantly higher in the dalteparin group. For BSF functionalization, using purified heparin was an effective approach that achieved a balance between preserving the mechanical properties and induction of tissue regeneration, offering the potential for various forms in the future.

Strong, elastic and degradation-tolerated hydrogels composed of chitosan, silk fibroin and bioglass nanoparticles with factor-bestowed activity for bone tissue engineering

Polymer hydrogels intended for use in bone repair need to be strong, elastic, and capable of enduring degradation. However, many natural polymer hydrogels lack these essential properties and thus, are unsuitable for bone repair applications. Here, a new type of multi-network hydrogel with improved mechanical and degradation-resistant properties has been developed for use in bone repair. The hydrogel is composed of thiolated chitosan (TCH), silk fibroin (SF), and thiolated bioglass (TBG) nanoparticles (NPs). The multi-networks are built through sulfhydryl self-crosslinking, diepoxide crosslinker-involved linkages of amino or hydroxyl groups, and enzyme-mediated phenol hydroxyl crosslinking. Additionally, mesoporous TBG NPs serve as a vehicle for loading stromal cell-derived factor-1 (SDF-1) to provide the gel with cell-recruiting activity. The formulated TCH/SF/TBG hydrogels exhibit remarkably enhanced strength, elasticity, and improved degradation tolerance compared to some gels made from only TCH or SF. Furthermore, TCH/SF/TBG gels can support the growth of seeded cells and the deposition of matrix components. Some TCH/SF/TBG gels also demonstrate the ability to release SDF-1 in an approximately linear manner for a few weeks while retaining the chemotactic properties of the released SDF-1. Overall, the multi-network hydrogel has the potential as an in situ forming material for cell-recruiting bone repair and regeneration.

Spidroins under the Influence of Alcohol: Effect of Ethanol on Secondary Structure and Molecular Level Solvation of Silk-Like Proteins

Future sustainable materials based on designer biomolecules require control of the solution assembly, but also interfacial interactions. Alcohol treatments of protein materials are an accessible means to this, making understanding of the process at the molecular level of seminal importance. We focus here on the influence of ethanol on spidroins, the main proteins of silk. By large-scale atomistically detailed molecular dynamics (MD) simulations and interconnected experiments, we characterize the protein aggregation, secondary structure changes, molecular level origins of them, and solvation environment changes for the proteins, as induced by ethanol as a solvation additive. The MD and circular dichoroism (CD) findings jointly show that ethanol promotes ordered structure in the protein molecules, leading to an increase of helix content and turns but also increased aggregation, as revealed by dynamic light scattering (DLS) and light microscopy. The structural changes correlate at the molecular level with increased intramolecular hydrogen bonding. The simulations reveal that polar amino acids, such as glutamine and serine, are most influenced by ethanol, whereas glycine residues are most prone to be involved in the ethanol-induced secondary structure changes. Furthermore, ethanol engages in interactions with the hydrophobic alanine-rich regions of the spidroin, significantly decreasing the hydrophobic interactions of the protein with itself and its surroundings. The protein solutes also change the microstructure of water/ethanol mixtures, essentially decreasing the level of larger local clustering. Overall, the work presents a systematic characterization of ethanol effects on a widely used, common protein type, spidroins, and generalizes the findings to other intrinsically disordered proteins by pinpointing the general features of the response. The results can aid in designing effective alcohol treatments for proteins, but also enable design and tuning of protein material properties by a relatively controllable solvation handle, the addition of ethanol.

Enhanced Biodegradability in Soil of Chicken Feather by Steam Explosion for Potential Application in Agricultural Biodegradable Plastics

Feather waste is a major issue from an economic and environmental point of view. Even though there are already routes for the valorisation of feathers into fertilisers and feather meal, these are considered to have low added value. For more attractive applications, for example in agricultural biodegradable plastics, higher and faster degradability in soil is required. To face this challenge alternative approaches to accelerate biodegradation and disintegration processes are needed. In this context, steam explosion appears as an effective technology to modify the structure of feather and improve its soil degradability. In this work, chicken feathers were treated by steam explosion and the effect of treatment on their structure and physico-chemical and thermal properties were evaluated. Finally, the effect of the process conditions on the disintegration and biodegradation in soil of feathers was also investigated, finding an increased degradation in soil of steam explosion treated feathers. These results open up the possibilities of using feather waste as a component for environmentally friendly agricultural bioplastics that can be degraded in-situ in soil.

Polysaccharides, proteins, and synthetic polymers based multimodal hydrogels for various biomedical applications: A review

Nature-derived or biologically encouraged hydrogels have attracted considerable interest in numerous biomedical applications owing to their multidimensional utility and effectiveness. The internal architecture of a hydrogel network, the chemistry of the raw materials involved, interaction across the interface of counter ions, and the ability to mimic the extracellular matrix (ECM) govern the clinical efficacy of the designed hydrogels. This review focuses on the mechanistic viewpoint of different biologically driven/inspired biomacromolecules that encourages the architectural development of hydrogel networks. In addition, the advantage of hydrogels by mimicking the ECM and the significance of the raw material selection as an indicator of bioinertness is deeply elaborated in the review. Furthermore, the article reviews and describes the application of polysaccharides, proteins, and synthetic polymer-based multimodal hydrogels inspired by or derived from nature in different biomedical areas. The review discusses the challenges and opportunities in biomaterials along with future prospects in terms of their applications in biodevices or functional components for human health issues. This review provides information on the strategy and inspiration from nature that can be used to develop a link between multimodal hydrogels as the main frame and its utility in biomedical applications as the primary target.

Effects of RGD-fused silk fibroin in a solution format on fibroblast proliferation and collagen production

BACKGROUND

Collagen production in fibroblasts is important for skin tissue repair. Cell-adhesive Arg-Gly-Asp (RGD) peptides immobilized on scaffolds stimulate fibroblast collagen production, but RGD peptides in solution exhibit opposite effects. Transgenic silkworm technology enables the design of fusion positions for RGD peptides in silk fibroin molecules. The effect of RGD-fused silk fibroin in solution on fibroblast cell activity remains unclear.

OBJECTIVE

To clarify the effects of RGD peptides fused to silk fibroin heavy (H)-chain or light (L)-chain on fibroblast proliferation and collagen production when RGD-fused silk fibroin proteins were added to the culture medium.

METHODS

Silk fibers with RGD-fused H-chains (H-RGD) or L-chains (L-RGD) were degummed, dissolved, and dialyzed to prepare H-RGD or L-RGD aqueous solutions, respectively. These solutions were added to the fibroblast medium, and their proliferation and collagen production were quantified.

RESULTS

Both L- and H-RGD stimulated fibroblast proliferation at a similar level, even in a solution format, but L-RGD promoted fibroblast collagen production significantly, indicating the synergistic effect of the native H-chain and RGD-fused L-chain.

CONCLUSION

RGD-fused silk fibroin in solution stimulated fibroblast proliferation and collagen production, depending on the fusion position of the peptides.

Performance of Colombian Silk Fibroin Hydrogels for Hyaline Cartilage Tissue Engineering

The development and evaluation of scaffolds play a crucial role in the engineering of hyaline cartilage tissue. This work aims to evaluate the performance of silk fibroin hydrogels fabricated from the cocoons of the Colombian hybrid in the in vitro regeneration of hyaline cartilage. The scaffolds were physicochemically characterized, and their performance was evaluated in a cellular model. The results showed that the scaffolds were rich in random coils and β-sheets in their structure and susceptible to various serine proteases with different degradation profiles. Furthermore, they showed a significant increase in ACAN, COL10A1, and COL2A1 expression compared to pellet culture alone and allowed GAG deposition. The soluble portion of the scaffold did not affect chondrogenesis. Furthermore, they promoted the increase in COL1A2, showing a slight tendency to differentiate towards fibrous cartilage. The results also showed that Colombian silk could be used as a source of biomedical devices, paving the way for sericulture to become a more diverse economic activity in emerging countries.

Biomimetic injectable hydrogel based on silk fibroin/hyaluronic acid embedded with methylprednisolone for cartilage regeneration

Articular cartilage injury is characterized by limited self-repair capacity due to the shortage of blood vessels, lymphatics, and nerves. Hence, this study aims to exploit a classic injectable hydrogel platform that can restore the cartilage defects with minimally invasive surgery, which is similar to the natural extracellular microenvironment, and highly porous network for cell adhesion and proliferation. In this study, an injectable scaffold system comprised of silk fibroin (SF) and hyaluronic acid (HA) was developed to adapt the above requirements. Besides, methylprednisolone (MP) was encapsulated by SF/HA scaffold for alleviating inflammation. The SF/HA hydrogel scaffold was prepared by chemical cross-linking between the lysine residues of SF via Schiff base formation, and pore diameter of the obtained hydrogels was 100.47 ± 32.09 µm. The highly porous nature of hydrogel could further benefit the soft tissue regeneration. Compared with HA-free hydrogels, SF/HA hydrogel showed more controlled release on MP. In ovo experiment of chick embryo chorioallantoic membrane (CAM) demonstrated that SF/HA hydrogels not altered the angiogenesis and formation of blood vessels, thus making it suitable for cartilage regeneration. Furthermore, in vivo gel formation was validated in mice model, suggesting in situ gel formation of SF/HA hydrogels. More importantly, SF/HA hydrogels exhibited the controlled biodegradation. Overall, SF/HA hydrogels provide further insights to the preparation of effective scaffold for tissue regeneration and pave the way to improve the articular cartilage injury treatment.

Use of Bombyx mori silk fibroin in tissue engineering: From cocoons to medical devices, challenges, and future perspectives

Silk fibroin has become a prominent material in tissue engineering (TE) over the last 20 years with almost 10,000 published works spanning in all the TE applications, from skeleton to neuronal regeneration. Fibroin is an extremely versatile biopolymer that, due to its ease of processing, has enabled the development of an entire plethora of materials whose properties and architectures can be tailored to suit target applications. Although the research and development of fibroin TE materials and devices is mature, apart from sutures, only a few medical products made of fibroin are used in the clinical routines. <40 clinical trials of Bombyx mori silk-related products have been reported by the FDA and few of them resulted in a commercialized device. In this review, after explaining the structure and properties of silk fibroin, we provide an overview of both fibroin constructs existing in the literature and fibroin devices used in clinic. Through the comparison of these two categories, we identified the burning issues faced by fibroin products during their translation to the market. Two main aspects will be considered. The first is the standardization of production processes, which leads both to the standardization of the characteristics of the issued device and the correct assessment of its failure. The second is the FDA regulations, which allow new devices to be marketed through the 510(k) clearance by demonstrating their equivalence to a commercialized medical product. The history of some fibroin medical devices will be taken as a case study. Finally, we will outline a roadmap outlining what actions we believe are needed to bring fibroin products to the market.

End-to-End Deep Learning Model to Predict and Design Secondary Structure Content of Structural Proteins

Structural proteins are the basis of many biomaterials and key construction and functional components of all life. Further, it is well-known that the diversity of proteins' function relies on their local structures derived from their primary amino acid sequences. Here, we report a deep learning model to predict the secondary structure content of proteins directly from primary sequences, with high computational efficiency. Understanding the secondary structure content of proteins is crucial to designing proteins with targeted material functions, especially mechanical properties. Using convolutional and recurrent architectures and natural language models, our deep learning model predicts the content of two essential types of secondary structures, the α-helix and the β-sheet. The training data are collected from the Protein Data Bank and contain many existing protein geometries. We find that our model can learn the hidden features as patterns of input sequences that can then be directly related to secondary structure content. The α-helix and β-sheet content predictions show excellent agreement with training data and newly deposited protein structures that were recently identified and that were not included in the original training set. We further demonstrate the features of the model by a search for de novo protein sequences that optimize max/min α-helix/β-sheet content and compare the predictions with folded models of these sequences based on AlphaFold2. Excellent agreement is found, underscoring that our model has predictive potential for rapidly designing proteins with specific secondary structures and could be widely applied to biomedical industries, including protein biomaterial designs and regenerative medicine applications.

3D bioprinted silk fibroin hydrogels for tissue engineering

The development of biocompatible and precisely printable bioink addresses the growing demand for three-dimensional (3D) bioprinting applications in the field of tissue engineering. We developed a methacrylated photocurable silk fibroin (SF) bioink for digital light processing 3D bioprinting to generate structures with high mechanical stability and biocompatibility for tissue engineering applications. Procedure 1 describes the synthesis of photocurable methacrylated SF bioink, which takes 2 weeks to complete. Digital light processing is used to fabricate 3D hydrogels using the bioink (1.5 h), which are characterized in terms of methacrylation, printability, mechanical and rheological properties, and biocompatibility. The physicochemical properties of the bioink can be modulated by varying photopolymerization conditions such as the degree of methacrylation, light intensity, and concentration of the photoinitiator and bioink. The versatile bioink can be used broadly in a range of applications, including nerve tissue engineering through co-polymerization of the bioink with graphene oxide, and for wound healing as a sealant. Procedure 2 outlines how to apply 3D-printed SF hydrogels embedded with chondrocytes and turbinate-derived mesenchymal stem cells in one specific in vivo application, trachea tissue engineering, which takes 2-9 weeks.

3D printing and properties of cellulose nanofibrils-reinforced quince seed mucilage bio-inks

Plant-based hydrogels have attracted great attention in biomedical fields since they are biocompatible and based on natural, sustainable, cost-effective, and widely accessible sources. Here, we introduced new viscoelastic bio-inks composed of quince seed mucilage and cellulose nanofibrils (QSM/CNF) easily extruded into 3D lattice structures through direct ink writing in ambient conditions. The QSM/CNF inks enabled precise control on printing fidelity where CNF endowed objects with shape stability after freeze-drying and with suitable porosity, water uptake capacity, and mechanical strength. The compressive and elastic moduli of samples produced at the highest CNF content were both increased by ~100% (from 5.1 ± 0.2 kPa and 32 ± 1 kPa to 10.7 ± 0.5 and 64 ± 2 kPa, respectively). These values ideally matched those reported for soft tissues; accordingly, the cell compatibility of the printed samples was evaluated against HepG2 cells (human liver cancer). The results confirmed the 3D hydrogels as being non-cytotoxic and suitable to support attachment, survival, and proliferation of the cells. All in all, the newly developed inks allowed sustainable 3D bio-hydrogels fitting the requirements as scaffolds for soft tissue engineering.

Ascorbic acid-loaded polyvinyl alcohol/cellulose nanofibril hydrogels as precursors for 3D printed materials

We proposed a simple method to process hydrogels containing polyvinyl alcohol and cellulose nanofibrils (PVA/CNF) to prepare volumetric architectures by direct ink writing (DIW). The presence of CNF in the aqueous PVA suspensions conferred rheology profiles that were suitable for extrusion and solidification in pre-designed shapes. The viscoelastic behavior of the hybrid inks enabled precise control on processability and shape retention, for instance, as demonstrated in multilayered lattice structures of high fidelity. After lyophilization, the obtained 3D-printed hydrogels presented a very high porosity, with open and interconnected pores, allowing a high-water uptake capacity (up to 1600%). The mechanical strength of the composite 3D-printed materials matched those of soft tissues, opening opportunities for skin applications. As such, drug-loaded samples revealed a controlled and efficient delivery of an antioxidant (ascorbic acid) in PBS buffer media at 23 °C (~80% for 8 h). Altogether, PVA/CNF hydrogels were introduced as suitable precursors of 3D-lattice geometries with excellent physical and mechanical characteristics.

Initial immune response to a FRET-based MMP sensor-immobilized silk fibroin hydrogel in vivo

To investigate the initial immune response to biodegradable silk fibroin (SF) hydrogels in vivo, a Förster/fluorescence resonance energy transfer (FRET)-based sensor was developed to detect matrix metalloproteinase (MMP) activity (FRET-MMPS) and immobilized to SF hydrogel. FRET-MMPS immobilized to SF hydrogel in vitro displayed intra-molecular FRET more than inter-molecular FRET, and MMP activity was detected through a decrease in FRET signal intensity. Then, the SF hydrogel modified with FRET-MMPS was implanted into mice subcutaneously, and it was observed that the FRET signal intensity decreased significantly soon (< 3 h) after implantation. Although the intensity exhibited a sharp decrease toward 24 h post-implantation, histological evaluation proved that bulk-level hydrogel degradation, such as breakdown, was mainly caused by macrophages and foreign body giant cells on a timescale of weeks. These results indicated that, immediately upon implantation, active MMPs reached the SF hydrogel and began cleaving SF networks, which might result in the loosening of the networks and then enabled immune cells, such as macrophages, to start the bulk-level hydrogel degradation. The sensor clarified the initial immune response to SF hydrogels and will provide clues for designing the biodegradation behaviors of scaffolds for regenerative medicine. STATEMENT OF SIGNIFICANCE: Silk fibroin (SF) materials are degraded gradually by the immune response. Immune cells, such as macrophages, break down implanted SF materials on a timescale of weeks or months, but the initial (< 24 h) immune response to SF materials remains unclear. In this study, SF hydrogels modified with Förster/fluorescence resonance energy transfer (FRET)-based matrix metalloproteinase (MMP) sensors were implanted in mice and within 3 h post-implantation, the SF hydrogels were degraded by MMPs. Although this molecular-level biodegradation was not correlated with the hydrogel breakdown, the MMPs were likely to loosen the SF networks to enable immune cells to infiltrate and degrade the hydrogel. This is the first study to unveil the initial stage of immune response to biomaterials.

Direct ink writing of aloe vera/cellulose nanofibrils bio-hydrogels

Direct-ink-writing (DIW) of hydrogels has become an attractive research area due to its capability to fabricate intricate, complex, and highly customizable structures at ambient conditions for various applications, including biomedical purposes. In the current study, cellulose nanofibrils reinforced aloe vera bio-hydrogels were utilized to develop 3D geometries through the DIW technique. The hydrogels revealed excellent viscoelastic properties enabled extruding thin filaments through a nozzle with a diameter of 630 μm. Accordingly, the lattice structures were printed precisely with a suitable resolution. The 3D-printed structures demonstrated significant wet stability due to the high aspect ratio of the nano- and microfibrils cellulose, reinforced the hydrogels, and protected the shape from extensive shrinkage upon drying. Furthermore, all printed samples had a porosity higher than 80% and a high-water uptake capacity of up to 46 g/g. Altogether, these fully bio-based, porous, and wet stable 3D structures might have an opportunity in biomedical fields.

Adipose tissue regeneration in a 3D-printed poly(lactic acid) frame-supported space in the inguinal region of rats

BACKGROUND

Adipose tissue engineering has been studied as an alternative to current options for breast reconstruction, such as lipofilling, flap reconstruction, and silicone implants. Previously, we demonstrated that a poly(L-lactic acid) mesh containing a collagen sponge, containing neither cells nor growth factors, could be filled with the regenerated adipose tissues when implanted in rodent models. However, the main factor contributing to adipogenesis remained unclear.

OBJECTIVE

We aimed to clarify whether adipogenesis can be achieved by the space provided by the mesh or by the bioactivity of collagen.

METHODS

A three-dimensional (3D) poly(lactic acid) (PLA) frame, which was stiff enough to maintain its shape, was fabricated by 3D printing. The frame with (PLA+ColI) or without (PLA only) a type I collagen hydrogel was implanted in the inguinal region of rats for up to 12 months. Adipose tissue regeneration in the PLA only and PLA+ColI groups was evaluated histologically.

RESULTS

The 3D PLA frame maintained its structure for 12 months in vivo and oil red O (ORO)-positive adipose tissues were regenerated in the frame. No significant difference in the ORO-positive area was detected between the PLA only and PLA+ColI groups.

CONCLUSION

The space supported by the frame was a key factor in adipogenesis in vivo.