Nanofibrous chitosan non-wovens for filtration applications

Constructing Stable Polyvinyl Alcohol/Gelatin/Cellulose Nanocrystals Composite Electrospun Membrane with Excellent Filtration Efficiency for PM2.5

Considering the high demand for air quality, the development of biomass-based air filtration membranes with high air filtration efficiency and good stability is an urgent task. In this work, polyvinyl alcohol (PVA), gelatin (GA), and cellulose nanocrystals (CNC) were mixed and prepared into a membrane through an electrospinning method for air filtration. After a hydrophobic modification, the modified PVA/GA/CNC composite membrane showed excellent filtration efficiency for PM2.5 (97.65%) through the internal three-dimensional structure barrier and the electrostatic capture effect of the CNC with a negative charge, as well as a low-pressure drop (only 50 Pa). In addition, the modified PVA/GA/CNC composite membrane had good mechanical properties (maximum tensile fracture rate of 78.3%) and high stability (air filtration efficiency of above 90% after five wash-filter cycles and a high-temperature treatment at 200 °C). It is worth noting that the whole preparation process is completed without organic solvents, putting forward a new strategy for the construction of green air filtration membranes.

Nanofiberous facemasks as protectives against pandemic respiratory viruses

INTRODUCTION

Wearing protective face masks and respirators has been a necessity to reduce the transmission rate of respiratory viruses since the outbreak of the coronavirus (COVID-19) disease. Nevertheless, the outbreak has revealed the need to develop efficient air filter materials and innovative anti-microbial protectives. Nanofibrous facemasks, either loaded with antiviral nanoparticles or not, are very promising personal protective equipment (PPE) against pandemic respiratory viruses.

AREAS COVERED

In this review, multiple types of face masks and respirators are discussed as well as filtration mechanisms of particulates. In this regard, the limitations of traditional face masks were summarized and the advancement of nanotechnology in developing nanofibrous masks and air filters was discussed. Different methods of preparing nanofibers were explained. The various approaches used for enhancing nanofibrous face masks were covered.

EXPERT OPINION

Although wearing conventional face masks can limit viral infection spread to some extent, the world is in great need for more protective face masks. Nanofibers can block viral particles efficiently and can be incorporated into face masks in order to enhance their filtration efficiency. Also, we believe that other modifications such as addition of antiviral nanoparticles can significantly increase the protection power of facemasks.

A systematic review on green and natural polymeric nanofibers for biomedical applications

Electrospinning is the simplest technique to produce ultrathin nanofibers, which enables the use of nanotechnology in various applications. Nanofibrous materials produced through electrospinning have garnered significant attention in biomedical applications due to their unique properties and versatile potential. In recent years, there has been a growing emphasis on incorporating sustainability principles into material design and production. However, electrospun nanofibers, owing to their reliance on solvents associated with significant drawbacks like toxicity, flammability, and disposal challenges, frequently fall short of meeting environmentally friendly standards. Due to the limited solvent choices and heightened concerns for safety and hygiene in modern living, it becomes imperative to carefully assess the implications of employing electrospun nanofibers in diverse applications and consumer products. This systematic review aims to comprehensively assess the current state of research and development in the field of "green and natural" electrospun polymer nanofibers as well as more fascinating and eco-friendly commercial techniques, solvent preferences, and other green routes that respect social and legal restrictions tailored for biomedical applications. We explore the utilization of biocompatible and biodegradable polymers sourced from renewable feedstocks, eco-friendly processing techniques, and the evaluation of environmental impacts. Our review highlights the potential of green and natural electrospun nanofibers to address sustainability concerns while meeting the demanding requirements of various biomedical applications, including tissue engineering, drug delivery, wound healing, and diagnostic platforms. We analyze the advantages, challenges, and future prospects of these materials, offering insights into the evolving landscape of environmentally responsible nanofiber technology in the biomedical field.

Use of Electrospinning for Sustainable Production of Nanofibers: A Comparative Assessment of Smart Textiles-Related Applications

Textile production is a major component of the global industry, with sales of over USD 450 billion and estimations of an 84% increase in their demand in the next 20 years. In recent decades, protective and smart textiles have played important roles in the social economy and attracted widespread popularity thanks to their wide spectrum of applications with properties, such as antimicrobial, water-repellent, UV, chemical, and thermal protection. Towards the sustainable manufacturing of smart textiles, biodegradable, recycled, and bio-based plastics are used as alternative raw materials for fabric and yarn production using a wide variety of techniques. While conventional techniques present several drawbacks, nanofibers produced through electrospinning have superior structural properties. Electrospinning is an innovative method for fiber production based on the use of electrostatic force to create charged threads of polymer solutions. Electrospinning shows great potential since it provides control of the size, porosity, and mechanical resistance of the fibers. This review summarizes the advances in the rapidly evolving field of the production of nanofibers for application in smart and protective textiles using electrospinning and environmentally friendly polymers as raw materials, and provides research directions for optimized smart fibers in the future.

Combating bacterial infections with host defense peptides: Shifting focus from bacteria to host immunity

The increasing prevalence of multidrug-resistant bacterial infections necessitates the exploration of novel paradigms for anti-infective therapy. Antimicrobial peptides (AMPs), also known as host defense peptides (HDPs), have garnered extensive recognition as immunomodulatory molecules that leverage natural host mechanisms to enhance therapeutic benefits. The unique immune mechanism exhibited by certain HDPs that involves self-assembly into supramolecular nanonets capable of inducing bacterial agglutination and entrapping is significantly important. This process effectively prevents microbial invasion and subsequent dissemination and significantly mitigates selective pressure for the evolution of microbial resistance, highlighting the potential of HDP-based antimicrobial therapy. Recent advancements in this field have focused on developing bio-responsive materials in the form of supramolecular nanonets. A comprehensive overview of the immunomodulatory and bacteria-agglutinating activities of HDPs, along with a discussion on optimization strategies for synthetic derivatives, is presented in this article. These optimized derivatives exhibit improved biological properties and therapeutic potential, making them suitable for future clinical applications as effective anti-infective therapeutics.

Scalable, solvent-free transparent film-based air filter with high particulate matter 2.5 filtration efficiency

Over the course of the COVID-19 pandemic, people have realized the importance of wearing a mask. However, conventional nanofiber-based face masks impede communication between people because of their opacity. Moreover, it remains challenging to achieve both high filtration performance and transparency through fibrous mask filters without using harmful solvents. Herein, scalable transparent film-based filters with high transparency and collection efficiency are fabricated in a facile manner by means of corona discharging and punch stamping. Both methods improve the surface potential of the film while the punch stamping procedure generates micropores in the film, which enhances the electrostatic force between the film and particulate matter (PM), thereby improving the collection efficiency of the film. Moreover, the suggested fabrication method involves no nanofibers and harmful solvents, which mitigates the generation of microplastics and potential risks for the human body. The film-based filter provides a high PM2.5 collection efficiency of 99.9 % while maintaining a transparency of 52 % at the wavelength of 550 nm. This enables people to distinguish the facial expressions of a person wearing a mask composed of the proposed film-based filter. Moreover, the results of durability experiments indicate that the developed film-based filter is anti-fouling, liquid-resistant, microplastic-free and foldability.

Functionalized nanofibers in gas sorption process: a critical review on the challenges and prospective research

Air pollution has become the most important environmental and human health threat as it is accounting for about 7 million deaths across the globe every year. Particulate matter (PM) derived from the combustion of fossil fuels, biomass, and other agricultural residues pollutes the atmospheric air which affects the quality of the environment and poses a great threat to human health. Ecological imbalance, climatic variation, and cardiovascular and respiratory problems among humans are significant extortions due to PM pollution. Scientific approaches were initiated to limit the levels of PM in the atmospheric air and the use of nanofiber mats has received wide attention as these possess versatile properties including nanoscale-sized pore structure, homogeneity in their size distribution with high specific surface area, and low basis weight. To exploit their filtration potential towards wide classes of pollutants and also to enhance the capturing efficacy, functionalized nanofibers are currently in practice with tailor-made modifications on the surface. The present review provides a comprehensive report on the different fabrication processes of functionalized nanofibers along with the controlling factors affecting the efficacy of the gas separation process. Also, it provides technical insights on the mass transfer aspects of PM filtration by elucidation their mechanism which can provide vital information on the rate-controlling diffusive flux(es). Conclusively, the practical challenges encountered in the large-scale air filtration systems such as filter cleaning, flow-rate regulation, pressure drop, and extent of reusability are discussed, and the review has identified potential gaps in the current research and can be considered for the prospective research in the area of PM separation process.

Nanostructured Bioaerogels as a Potential Solution for Particulate Matter Pollution

Particulate matter (PM) pollution is a significant environmental and public health issue globally. Exposure to high levels of PM, especially fine particles, can have severe health consequences. These particles can come from a variety of sources, including natural events like dust storms and wildfires, as well as human activities such as industrial processes and transportation. Although an extensive development in air filtration techniques has been made in the past few years, fine particulate matter still poses a serios and dangerous threat to human health and to our environment. Conventional air filters are fabricated from non-biodegradable and non-ecofriendly materials which can cause further environmental pollution as a result of their excessive use. Nanostructured biopolymer aerogels have shown great promise in the field of particulate matter removal. Their unique properties, renewable nature, and potential for customization make them attractive materials for air pollution control. In the present review, we discuss the meaning, properties, and advantages of nanostructured aerogels and their potential in particulate matter removal. Particulate matter pollution, types and sources of particulate matter, health effect, environmental effect, and the challenges facing scientists in particulate matter removal are also discussed in the present review. Finally, we present the most recent advances in using nanostructured bioaerogels in the removal of different types of particulate matter and discuss the challenges that we face in these applications.

Robustness of antiadhesion between nanofibers and surfaces covered with nanoripples of varying spatial period

Since nanofibers have a high surface-to-volume ratio, van der Waals forces render them attracted to virtually any surface. The high ratio provides significant advantages for applications in drug delivery, wound healing, tissue regeneration, and filtration. Cribellate spiders integrate thousands of nanofibers into their capture threads as an adhesive to immobilize their prey. These spiders have antiadhesive nanoripples on the calamistrum, a comb-like structure on their hindmost legs, and are thus an ideal model for investigating how nanofiber adhesion can be reduced. We found that these nanoripples had similar spacing in the cribellate species Uloborus plumipes, Amaurobius similis, and Menneus superciliosus, independent of phylogenetic relation and size. Ripple spacing on other body parts (i.e., cuticle, claws, and spinnerets), however, was less homogeneous. To investigate whether a specific distance between the ripples determines antiadhesion, we fabricated nanorippled foils by nanosecond UV laser processing. We varied the spatial periods of the nanoripples in the range ~203-613 nm. Using two different pulse numbers resulted in ripples of different heights. The antiadhesion was measured for all surfaces, showing that the effect is robust against alterations across the whole range of spatial periods tested. Motivated by these results, we fabricated irregular surface nanoripples with spacing in the range ~130-480 nm, which showed the same antiadhesive behavior. The tested surfaces may be useful in tools for handling nanofibers such as spoolers for single nanofibers, conveyor belts for producing endless nanofiber nonwoven, and cylindrical tools for fabricating tubular nanofiber nonwoven. Engineered fibers such as carbon nanotubes represent a further candidate application area.

Implementation of jute-based nose holder in surgical masks to reduce plastic contamination

Plastic, in all its forms, always harms the environment, humans, and other living organisms. The coronavirus situation exacerbates the use of plastic products more than at any other time, of which surgical masks contribute to plastic pollution the most. These masks spread to terrestrial and aquatic environments, where they break down into even more noxious microplastics. These microplastics enter the human food chain through water and fish, causing severe damage to the lungs, kidneys, and intestines and even causing death. In this paper, a jute nose holder mask was prepared as an alternative to typical masks to reduce plastic pollution. The jute nose holder was produced with a modified jute flyer-spinning frame machine, where jute was used as the sheath and metal wire was applied as the core component. The nose holder was later coated with starch-based natural gum. Then, the non-woven fabric of 75 grams per square meter (GSM), and the jute nose holder were used to produce the alternative, environmentally friendly mask, which might reduce the 773 tons of plastic waste generated daily from the nose holder of the mask. This alternative mask was then distributed to 900 people for a survey to find out their opinion. From the results of the survey, it is seen that 82.6% of people felt no problem in the nose when they put on the given mask. 85.6% considered the mask more comfortable than the traditional mask, and it was rated above average by 79.8% of the surveyors. So, this study suggests that the given mask can be a sustainable alternative to traditional masks.

A Novel Vision of Reinforcing Nanofibrous Masks with Metal Nanoparticles: Antiviral Mechanisms Investigation

Prevention of spreading viral respiratory disease, especially in case of a pandemic such as coronavirus disease of 2019 (COVID-19), has been proved impossible without considering obligatory face mask-wearing protocols for both healthy and contaminated populations. The widespread application of face masks for long hours and almost everywhere increases the risks of bacterial growth in the warm and humid environment inside the mask. On the other hand, in the absence of antiviral agents on the surface of the mask, the virus may have a chance to stay alive and be carried to different places or even put the wearers at risk of contamination when touching or disposing the masks. In this article, the antiviral activity and mechanism of action of some of the potent metal and metal oxide nanoparticles in the role of promising virucidal agents have been reviewed, and incorporation of them in an electrospun nanofibrous structure has been considered an applicable method for the fabrication of innovative respiratory protecting materials with upgraded safety levels.

Graphical Abstract

Cationised Fibre-Based Cellulose Multi-Layer Membranes for Sterile and High-Flow Bacteria Retention and Inactivation

Low-cost, readily available, or even disposable membranes in water purification or downstream biopharma processes are becoming attractive alternatives to expensive polymeric columns or filters. In this article, the potential of microfiltration membranes prepared from differently orientated viscose fibre slivers, infused with ultrafine quaternised (qCNF) and amino-hydrophobised (aCNF) cellulose nanofibrils, were investigated for capturing and deactivating the bacteria from water during vacuum filtration. The morphology and capturing mechanism of the single- and multi-layer structured membranes were evaluated using microscopic imaging and colloidal particles. They were assessed for antibacterial efficacy and the retention of selected bacterial species (Escherichia coli, Staphylococcus aureus, Micrococcus luteus), differing in the cell envelope structure, hydrodynamic biovolume (shape and size) and their clustering. The aCNF increased biocidal efficacy significantly when compared to qCNF-integrated membrane, although the latter retained bacteria equally effectively by a thicker multi-layer structured membrane. The retention of bacterial cells occurred through electrostatic and hydrophobic interactions, as well as via interfibrous pore diffusion, depending on their physicochemical properties. For all bacterial strains, the highest retention (up to 100% or log 6 reduction) at >50 L/h∗bar∗m² flow rate was achieved with a 4-layer gradient-structured membrane containing different aCNF content, thereby matching the performance of industrial polymeric filters used for removing bacteria.

Polysaccharides for Medical Technology: Properties and Applications

Over the past decade, the use of polysaccharides has gained tremendous attention in the field of medical technology. They have been applied in various sectors such as tissue engineering, drug delivery system, face mask, and bio-sensing. This review article provides an overview and background of polysaccharides for biomedical uses. Different types of polysaccharides, for example, cellulose and its derivatives, chitin and chitosan, hyaluronic acid, alginate, and pectin are presented. They are fabricated in various forms such as hydrogels, nanoparticles, membranes, and as porous mediums. Successful development and improvement of polysaccharide-based materials will effectively help users to enhance their quality of personal health, decrease cost, and eventually increase the quality of life with respect to sustainability.

Non-Woven Filters Made of PLA via Solution Blowing Process for Effective Aerosol Nanoparticles Filtration

With the development of civilization, the awareness of the impact of versatile aerosol particles on both human health and the environment is growing. New materials are needed to purify the air to control this impact The aspect of processing the produced waste is not negligible. In view of the above, this study proposes utilizing the solution blow spinning process (SBS) for manufacturing a biodegradable filtration structure that ensures high efficiency of nanoobject filtration, with a low pressure drop. Polylactic acid (PLA) was used to produce a nanofiber layer on the coconut substrate. The advantage of this method is the ability to blow fibers with diameters in the nano-scale, applying relatively simple, cost-effective, and easy to scale-up equipment. This work selected appropriate process parameters to produce good quality filters. Moreover, the process conditions influence on the morphology of the obtained structures and, thus, also the filtration properties, were examined. For tested solutions, i.e., 4% and 6%, the mean fiber diameter decreased as the concentration decreased. Therefore, the overall filtering efficiency increased as the concentration of the used solution decreased. The produced structures exhibited approximately 70% filtration efficiency for particles ranging from 0.02 to 0.2 μm with a pressure drop of less than 60 Pa. Obtained results are optimistic and are a step in producing efficient, biodegradable filters to remove nanoparticles from air.

A Review of the Fabrication Methods, Testing, and Performance of Face Masks

Improvement in the performance and compatibility of face masks has remained the focus of researchers in recent years, especially after the emergence of the COVID pandemic. Although a lot of progress in the design, tolerability, and comfort of the mask has been reported, there are certain limitations, requiring further improvement. The present review aims to highlight the filtration efficacy, comfort, and associated characteristic of various types of face masks and respirators as a function of their design and structure. In addition, the air pollutants, their adverse effects on health, certified respirators, and face masks are also discussed. The present review also provides an insight into different types of commercially available face masks in terms of their materials, filtration efficiency, and limitations. The role of emerging trends (such as nanotechnology and high-performance polymers) in the improvement and development of face masks and respirators is also discussed.

Degradable, antibacterial and ultrathin filtrating electrospinning membranes of Ag-MOFs/poly(l-lactide) for air pollution control and medical protection

The widely used melt-blown polypropylene (PP) non-woven fabrics had no antibacterial functions and its large-scale use also increased the burden on the environment owing to its non-degradable property. Herein, silver (I) metal organic frameworks (Ag-2MI) were prepared with AgNO3 and 2-methylimidazole and embedded into degradable poly(l-lactide) (PLLA) to make an ultrathin filtration and antibacterial membrane by electrospinning technology with low loading of Ag-2MI. The morphology, mechanical properties, adsorption performance and antibacterial activities of the prepared films were tested and the results indicated that the addition of Ag-2MI could reduce the diameter of PLLA fibers from 910 nm to 520 nm (1.8 wt% of Ag-2MI), while the tensile strength, elongation at break of the membrane and the contact angle of the films were enhanced. Although the thickness of the prepared membranes was only about one-third of that of commercially available melt-blown cloth, they exhibited better filtering performances than the melt-blown cloth. The fiber membrane with low loading of 1.8 wt% Ag-2MI showed 99.99% inhibition rate against Escherichia coli and Staphylococcus aureus.

Advanced materials used in wearable health care devices and medical textiles in the battle against coronavirus (COVID-19): A review

The novel coronavirus disease (COVID-19) has generated great confusion around the world, affecting people's lives and producing a large number of deaths. The development of portable and wearable devices is of great importance in several fields such as point-of-care medical applications and environmental monitoring. Wearable devices with an ability to collect various types of physiological records are progressively becoming incorporated into everyday life of people. Physiological indicators are essential health indicators and their monitoring could efficiently enable early discovery of disease. This would also help decrease the number of extra severe health problems, in disease avoidance, and lower the overall public sector health cost. Protective clothing is nowadays a main part of textiles classified as technical or industrial textiles. Protective clothing aims to protect its wearer from the harsh environmental impacts that may result in injury or death. Providing protection for the common population has also been taken seriously considering the anticipated disaster due to virus attacks. This review highlights the properties of the materials that are used in wearable health care device and medical textiles.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Nanoparticles are the gateway to the new era in drug delivery of biocompatible agents. Several products have emerged from nanomaterials in quest of developing practical wound healing dressings that are nonantigenic, antishear stress, and gas-exchange permeable. Numerous studies have isolated and characterised various wound healing nanomaterials and nanoproducts. The electrospinning of natural and synthetic materials produces fine products that can be mixed with other wound healing medications and herbs. Various produced nanomaterials are highly influential in wound healing experimental models and can be used commercially as well. This article reviewed the current state-of-the-art and briefly specified the future concerns regarding the different systems of nanomaterials in wound healing (i.e., inorganic nanomaterials, organic and hybrid nanomaterials, and nanofibers). This review may be a comprehensive guidance to help health care professionals identify the proper wound healing materials to avoid the usual wound complications.

Efficient capture of airborne PM by nanotubular conjugated microporous polymers based filters under harsh conditions

The exploitation of high-performance filters which can capture and remove airborne particulate matter (PM) in harsh conditions is greatly important to limit the serious effect of PM on human health. Herein, we demonstrate a simple approach for the creation of robust and hierarchically porous filters based on conjugated microporous polymers (CMPs) nanotubes for efficient PM capture. Taking advantage of their inherently superhydrophobic wettability, the CMPs-based filters possess high filtration efficiency of higher than 99.4% for PM_0.3 and 99.9% for PM_2.5 and PM₁₀, respectively, even in high humidity environment (RH ≥ 94%). The CMPs-based filters show highly physicochemical and thermal stability, e.g., by calcination at 500 °C for 2 h, the filtration efficiency of the samples still reaches as great as 99.4% for both PM_2.5 and PM₁₀ with a low-pressure drop of only 10 Pa. In addition, these CMPs-based filters can be easily regenerated and their high PM filtration efficiency remains nearly unchanged by a simple methanol washing. More interestingly, the CMPs-based filters also exhibit superior antibacterial performance, which enables them to sterilize or eliminate the bacteria possibly loaded on PM pollutions, thus showing great potential for various applications such as PM removal, air purification and so on.

Evaluation of filter media covered with spun fibres and containing thyme essential oil with antimicrobial properties

Inhalation of bioaerosols has been linked to many health problems. Filter media impregnated with antimicrobial material can provide effective removal and inactivation of bioaerosols. In this study, fibres were spun on a substrate by centrifugal spinning, obtaining filter media denoted 5THY and THY. Thyme essential oil was used as an antimicrobial agent. For 5THY, the thyme essential oil was added to the polyacrylonitrile (PAN) solution, while for THY, it was sprayed onto the medium after the fibres had been produced. The THY medium presented a higher collection efficiency, compared to the substrate or 5THY, with efficiencies of 99% for microparticles and 58% for nanoparticles. Using the plaque assay method, THY provided the highest reductions of the bacteria Escherichia coli and Staphylococcus aureus, with efficiency of 99.999%. The findings demonstrated that filter media covered with spun fibres and containing thyme essential oil provided excellent antimicrobial action and filtration performance.

Electrospinning of Chitosan for Antibacterial Applications—Current Trends

Chitosan is a natural biopolymer that can be suitable for a wide range of applications due to its biocompatibility, rigid structure, and biodegradability. Moreover, it has been proven to have an antibacterial effect against several bacteria strains by incorporating the advantages of the electrospinning technique, with which tailored nanofibrous scaffolds can be produced. A literature search is conducted in this review regarding the antibacterial effectiveness of chitosan-based nanofibers in the filtration, biomedicine, and food protection industries. The results are promising in terms of research into sustainable materials. This review focuses on the electrospinning of chitosan for antibacterial applications and shows current trends in this field. In addition, various aspects such as the parameters affecting the antibacterial properties of chitosan are presented, and the application areas of electrospun chitosan nanofibers in the fields of air and water filtration, food storage, wound treatment, and tissue engineering are discussed in more detail.

Polyvinyl alcohol/silver electrospun nanofibers: Biocidal filter media capturing virus-size particles

In response to the nowadays battle against SARS-CoV-2, we designed a new class of high performant filter media suitable to advance the facemask technology and provide new efficient widespread solutions against virus propagation. By means of the electrospinning technology we developed filter media based on polyvinyl alcohol (PVA) nanofibers doped with AgNPs combining three main performance requirements: high air filtration efficiency to capture nanometer-size particles, low airflow resistance essential to ensure breathability and antimicrobial activity to inactivate aerosolized microorganisms. PVA/AgNPs electrospun nanofibers were produced by electrospinning the dispersion of colloidal silver into the PVA water solution. A widespread physicochemical characterization was addressed to the Ag colloidal suspension. The key functional performances of the electrospun nanofibers were proven by water stability, antibacterial activity, and filtration efficiency and pressure drop measurements performed under conditions representative of facemasks. We assessed a total bacterial depletion associated to a filtering efficiency towards nano-aerosolized particles of 97.7% higher than required by the EN149 standard and a pressure drop in line with FFP1 and FFP2 masks, even at the highest filtration velocity. Such results pave the way to the application of PVA/AgNPs electrospun nanofibers in facemasks as advanced filtering media for protecting against airborne microorganisms.

Biodegradable and multifunctional surgical face masks: A brief review on demands during COVID-19 pandemic, recent developments, and future perspectives

Providing the greater public with the current coronavirus (SARS-CoV-2) vaccines is time-consuming and research-intensive; intermediately, some essential ways to reduce the transmission include social distancing, personal hygiene, testing, contact tracing, and universal masking. The data suggests that universal masking, especially using multilayer surgical face masks, offers a powerful efficacy for indoor places. These layers have different functions including antiviral/antibacterial, fluid barrier, particulate and bacterial filtration, and fit and comfort. However, universal masking poses a serious environmental threat since billions of them are disposed on a daily basis; the current coronavirus disease (COVID-19) has put such demands and consequences in perspective. This review focuses on surgical face mask structures and classifications, their impact on our environment, some of their desirable functionalities, and the recent developments around their biodegradability. The authors believe that this review provides an insight into the fabrication and deployment of effective surgical face masks, and it discusses the utilization of multifunctional structures along with biodegradable materials to deal with future demands in a more eco-friendly fashion.

Ambient Climate Influences Anti-Adhesion between Biomimetic Structured Foil and Nanofibers

Due to their uniquely high surface-to-volume ratio, nanofibers are a desired material for various technical applications. However, this surface-to-volume ratio also makes processing difficult as van der Waals forces cause nanofibers to adhere to virtually any surface. The cribellate spider Uloborus plumipes represents a biomimetic paragon for this problem: these spiders integrate thousands of nanofibers into their adhesive capture threads. A comb on their hindmost legs, termed calamistrum, enables the spiders to process the nanofibers without adhering to them. This anti-adhesion is due to a rippled nanotopography on the calamistrum. Via laser-induced periodic surface structures (LIPSS), these nanostructures can be recreated on artificial surfaces, mimicking the non-stickiness of the calamistrum. In order to advance the technical implementation of these biomimetic structured foils, we investigated how climatic conditions influence the anti-adhesive performance of our surfaces. Although anti-adhesion worked well at low and high humidity, technical implementations should nevertheless be air-conditioned to regulate temperature: we observed no pronounced anti-adhesive effect at temperatures above 30 °C. This alteration between anti-adhesion and adhesion could be deployed as a temperature-sensitive switch, allowing to swap between sticking and not sticking to nanofibers. This would make handling even easier.

Electrospinning of chitosan-based nanofibers: from design to prospective applications

Chitosan is a biopolymer originating from renewable resources, with great properties which make it an attractive candidate for plenty of applications of contemporary interest. By manufacturing chitosan into nanofibers using the electrospinning method, its potential is amplified due to the enhancement of the active surface and the low preparation cost. Many attempts were made with the aim of preparing chitosan-based nanofibers with controlled morphology targeting their use for tissue engineering, wound healing, food packaging, drug delivery, air and water purification filters. This was a challenging task, which resulted in a high amount of data, sometimes with apparent contradictory results. In this light, the goal of the paper is to present the main routes reported in the literature for chitosan electrospinning, stressing the advantages and disadvantages of each of them. Special emphasis is placed on the influence of various electrospinning parameters on the morphological characteristics of the fibers and their suitability for distinct applications.

Electrospun Cellulosic Membranes toward Efficient Chiral Resolutions via Enantioselective Permeation

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC), known as one of the most versatile chiral selectors packed in columns for chiral chromatography, is electrospun for the first time. The electrospun nanofibers with a mean diameter of 329 nm form a self-standing nonwoven textile with a specific surface area of 5.6 m²/g. The textile is sandwiched between commercially available polytetrafluoroethylene membrane filters as a support material to fabricate a CDMPC membrane system for the chiral resolution of a racemic mixture, (R,S)-1-(1-naphthyl)ethanol. A vacuum filtration of the racemic mixture through the membrane system using a mixed solvent of n-hexane/2-propanol = 9/1 (v/v) enriches the S-enantiomer in the filtrate due to an enantioselective sorption of the R-enantiomer. The sorption capacity can be regenerated repeatedly via extractions of the adsorbed enantiomers from the membrane system after the filtrations. By repeating the vacuum filtration-extraction process for 15 cycles, the enantiomeric excess (e.e.) of the S-isomer in the filtrate increases up to 32.9%.

Potential natural polymer-based nanofibres for the development of facemasks in countering viral outbreaks

The global coronavirus disease 2019 (COVID-19) pandemic has rapidly increased the demand for facemasks as a measure to reduce the rapid spread of the pathogen. Throughout the pandemic, some countries such as Italy had a monthly demand of ca. 90 million facemasks. Domestic mask manufacturers are capable of manufacturing 8 million masks each week, although the demand was 40 million per week during March 2020. This dramatic increase has contributed to a spike in the generation of facemask waste. Facemasks are often manufactured with synthetic materials that are non-biodegradable, and their increased usage and improper disposal are raising environmental concerns. Consequently, there is a strong interest for developing biodegradable facemasks made with for example, renewable nanofibres. A range of natural polymer-based nanofibres has been studied for their potential to be used in air filter applications. This review article examines potential natural polymer-based nanofibres along with their filtration and antimicrobial capabilities for developing biodegradable facemask that will promote a cleaner production.

Chitin and chitosan on the nanoscale

In a matter of decades, nanomaterials from biomass, exemplified by nanocellulose, have rapidly transitioned from once being a subject of curiosity to an area of fervent research and development, now reaching the stages of commercialization and industrial relevance. Nanoscale chitin and chitosan, on the other hand, have only recently begun to raise interest. Attractive features such as excellent biocompatibility, antibacterial activity, immunogenicity, as well as the tuneable handles of their acetylamide (chitin) or primary amino (chitosan) functionalities indeed display promise in areas such as biomedical devices, catalysis, therapeutics, and more. Herein, we review recent progress in the fabrication and development of these bio-nanomaterials, describe in detail their properties, and discuss the initial successes in their applications. Comparisons are made to the dominant nanocelluose to highlight some of the inherent advantages that nanochitin and nanochitosan may possess in similar application.

Preparation and characterization of air nanofilters based on cellulose nanofibers

One of the most important environmental issues in the world today is the problem of air pollution, which includes particulate matter (PM) and greenhouse gases (mainly CO₂). The production of efficient sustainable filters to overcome this concern as well as to provide an alternative to synthetic petroleum-based filters remains a demanding challenge. The purpose of this research was to first produce novel cellulose nanofibers (CNF) based nanofilter from a combination of CNF and chitosan (CS) and then evaluate its applicability for air purification. A number of structural and chemical properties as well as CO₂ and PM adsorption efficiency of the modified CNF, were determined using advanced characterization techniques. After pretests, we determined the optimum loading for the CS was 1 wt%, and upon producing the samples, the CNF loadings (1, 1.5, and 2 wt%) were chosen as one variable. For particle absorption, the PM sizes (0.1, 0.3, 0.5, and 2.5 μm) were kept as other variables. Based on SEM results, we concluded the higher the concentration of CNF the higher the specific surface area and the lower the porosity and the diameter of the pores, which was confirmed by the BET test. Furthermore, the results showed that increasing the concentration of modified CNFs increases the adsorption rate of CO₂ and PM and that the highest adsorption of CO₂ and PM belonged to the 2% modified CNF.

Biopolymer-Based Filtration Materials

Biobased materials such as cellulose, chitin, silk, soy, and keratin are attractive alternatives to conventional synthetic materials for filtration applications. They are cheap, naturally abundant, and easily fabricated with tunable surface chemistry and functionality. With the planet's increasing crisis due to pollution, the need for proper filtration of air and water is undeniably urgent. Additionally, fibers that are antibacterial and antiviral are critical for public health and in medical environments. The current COVID-19 pandemic has highlighted the necessity for cheap, easily mass-produced antiviral fiber materials. Biopolymers can fill these roles very well by utilizing their intrinsic material properties, surface chemistry, and hierarchical fiber morphologies for efficient and eco-friendly filtration of physical, chemical, and biological pollutants. Further, they are biodegradable, making them attractive as sustainable, biocompatible green filters. This review presents various biopolymeric materials generated from proteins and polysaccharides, their synthesis and fabrication methods, and notable uses in filtration applications.

2D and 3D Bulk Materials for Environmental Remediation: Air Filtration and Oil/Water Separation

Air and water pollution pose an enormous threat to human health and ecosystems. In particular, particulate matter (PM) and oily wastewater can cause serious environmental and health concerns. Thus, controlling PM and oily wastewater has been a great challenge. Various techniques have been reported to effectively remove PM particles and purify oily wastewater. In this article, we provide a review of the recent advancements in air filtration and oil/water separation using two- and three-dimensional (2D and 3D) bulk materials. Our review covers the advantages, characteristics, limitations, and challenges of air filters and oil/water separators using 2D and 3D bulk materials. In each section, we present representative works in detail and describe the concepts, backgrounds, employed materials, fabrication methods, and characteristics of 2D and 3D bulk material-based air filters and oil/water separators. Finally, the challenges, technical problems, and future research directions are briefly discussed for each section.

Structural design and environmental applications of electrospun nanofibers

Nanofibers have attracted extensive attention and been applied in various fields due to their high aspect ratio, high specific surface area, flexibility, structural abundance, etc. The electrospinning method is one of the most promising and effective ways to produce nanofibers. The electrospun nanofibers-based films and membranes have already been demonstrated to possess small pore sizes, larges specific surface area, and can be grafted with different functionalities to adapt to various purposes. The environmental applications of nanofibers are one of the essential application fields, and great achievements have been made in this field. To well summarize the development of nanofibers and their environmental applications, we review the nanofiber fabrication methods, advanced fiber structures, and their applications in the field of air filtration, heavy metal removal, and self-cleaning surface. We hope this review and summary can provide readers a comprehensive understanding of the structural design and environmental applications of electrospun nanofibers.

Polybenzimidazole-Benzophenone Composite Nanofiber Window Air Filter with Superb UV Resistance and High Chemical and Thermal Durability

There is a growing interest in window air filters to protect indoor air quality from ultrafine particulate matter (PM) in outdoor air. The filters for this purpose must achieve high filtering efficiency without compromising the original functions of the window, such as high air permeability and visibility. Several filters meeting these requirements have been developed and demonstrate a high PM_2.5 filtering efficiency. However, these filters are installed outside the window or on the window screen guard, thereby requiring high levels of ultraviolet (UV), chemical, and thermal resistance. These requirements have been overlooked so far. In this study, we examine the fabrication and performance of a polybenzimidazole-benzophenone (PBI-BP) composite nanofiber air filter that demonstrates superb UV resistance and chemical and thermal durability. Because of the UV absorbance of the BP in the nanofibers, the filter membrane is robust even under prolonged UV exposure, which is essential for filters for this purpose. The filter membrane is not damaged even after treatment in strong acids or annealing at high temperature up to 400 °C. Thus, the PBI-BP composite filter is suitable for practical application in window air filters and can be adapted to develop filters used under other harsh environments.

The potential applications of picotechnology in biomedical and environmental sciences

Picotechnology development in vast disciplines is mainly attributed to the research and development (R and D) on nanotechnology. Being a parent technology, nanotechnology is the cornerstone of picotechnology. Like nanotechnology, the reference standard for picotechnology is nature, the cellular and subcellular functioning. Some studies have highlighted that the functional margin of similar type of molecules at picoscale (10^-12) goes higher than at nanoscale (10^-9). In this review, the potential applications of picotechnology have been evaluated especially in the disciplines of biomedical and environmental sciences. Extended surface area and improved electrical, chemical, optical, and mechanical properties make picotechnological products even better than nanomaterials. The fundamental objective of this study is to bring the attention of the scientific world towards the picoscale interventions and to highlight the wide scope of picotechnology as a newly emerging technology with applications in numerous sectors. Picotechnology has made it possible to measure very small structure in advance biomedical and environmental sciences studies. Adequate developments in picotechnology will certainly change human lives in near future because it will make possible for the research world to dive into systems and structures on picoscale. It will render a platform through which explorers can travel into ultra-small areas, which will lead to the creation of new dimensions as well as new opportunities. Eventually, in future, the picotechnology will become smaller enough to give birth to femtotechnology (10^-15) in real-world applications.

Rechargeable polyamide-based N-halamine nanofibrous membranes for renewable, high-efficiency, and antibacterial respirators

Emerging infectious diseases (EIDs) have been acknowledged as a major public health concern worldwide. Unfortunately, most protective respirators used to prevent EID transmission suffer from the disadvantage of lacking antimicrobial activity, leading to an increased risk of cross-contamination and post-infection. Herein, we report a novel and facile strategy to fabricate rechargeable and biocidal air filtration materials by creating advanced N-halamine structures based on electrospun polyamide (PA) nanofibers. Our approach can endow the resultant nanofibrous membranes with powerful biocidal activity (6 log CFU reduction against E. coli), an ultrahigh fine particle capture efficiency of 99.999% (N100 level for masks), and can allow the antibacterial efficacy and air filtration performance to be renewed in a one-step chlorination process, which has never been reported before. More importantly, for the first time, we revealed the synergistic effect involving the intrinsic structure of polymers and the assembling structure of nanofibers on the chlorination capacity. The successful fabrication of such a fascinating membrane can provide new insights into the development of nanofibrous materials in a multifunctional, durable, and renewable form.

Preparation, characterization and kinetics study of chitosan/PVA electrospun nanofiber membranes for the adsorption of dye from water

In this study, chitosan (CS) nanofibers with two different degrees of deacetylation (DDA) were first successfully fabricated from its solution in 1% aqueous acetic acid solution by mixing with poly(vinyl alcohol) (PVA) solution at a weight ratio of 50/50 via the electrospinning method. Then, the CS/PVA membranes were further modified by glutaraldehyde vapor. The prepared nanofibers were characterized by field electron scanning electron microscopy (FESEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), the tensile test, the contact angle test, the weight loss test and the adsorption test for Congo red (CR). SEM analysis showed defect-free nanofibers and a uniform diameter distribution, with an average diameter of 100–125 nm. Subsequently, FTIR spectroscopy, XRD and TGA indicated that the modified CS/PVA membranes had a relatively higher thermal stability, because the thermal decomposition temperature of the unmodified CS/PVA membranes (~250°C) increased to a higher temperature (~ 300°C) for the modified CS/PVA. The nanofiber membranes after modification possessed better mechanical tensile properties. The membranes with lower DDA had a relatively higher tensile strength, which can withstand the maximum tensile strength of up to 6.36 MPa. Furthermore, the resulting membranes showed excellent hydrophilicity and kept their stability in distilled water, acidic, and basic media for 20 days. In the adsorption study, the maximum adsorption capacity of the membrane for CR was 358 mg/l in the optimum operating conditions of 25°C, pH = 6, 0.3 g membrane and 50 ml of 100 mg/l CR solutions. The resulting nanofibers membranes showed a better fitting to the Langmuir isotherm model and pseudo-second-order kinetic model.

Electrospinning and electrospraying technologies for food applications

Electrospinning and electrospraying are versatile techniques for the production of nano- to micro-scale fibers and particles. Over the past 2 decades, significant progresses have been made to advance the fundamental understandings of these electrohydrodynamic processes. Researchers have investigated different polymeric and non-polymeric substrates for producing submicron electrospun/electrosprayed materials of unique morphologies and physicochemical properties. This chapter provides an overview on the basic principles of electrospinning and electrospraying, highlighting the effects of key processing and solution parameters. Electrohydrodynamic phenomena of edible substrates, including polysaccharides (xanthan, alginate, starch, cyclodextrin, pullulan, dextran, modified celluloses, and chitosan), proteins (zein, what gluten, whey protein, soy protein, gelatin, etc.), and phospholipids are reviewed. Selected examples are presented on how ultrafine fibers and particles derived from these substrates are being exploited for food and nutraceutical applications. Finally, the challenges and opportunities of the electrostatic methods are discussed.