Design and construction of polymerized-glucose coated Fe3O4 magnetic nanoparticles for delivery of aspirin

Selective binding of cationic fibrinogen-mimicking chitosan nanoparticles to activated platelets and efficient drug release for antithrombotic therapy

Thrombosis is the main cause of catastrophic events including ischemic stroke, myocardial infarction and pulmonary embolism. Acetylsalicylic acid (ASA) therapy offers a desirable approach to antithrombosis through a reduction of platelet reactivity. However, major bleeding complications, severe off-target side effects, and resistance or nonresponse to ASA greatly attenuate its clinical outcomes. Herein, we report a cationic fibrinogen-mimicking nanoparticle, denoted as ASA-RGD-CS@TPP, to achieve activated-platelet-targeted delivery and efficient release of ASA for safer and more effective antithrombotic therapy. This biomimetic antithrombotic system was prepared by one-pot ionic gelation between cationic arginine-glycine-aspartic acid (RGD)-grafted chitosan (RGD-CS) and anionic tripolyphosphate (TPP). The platform exhibited selective binding to activated platelets, leading to efficient release of ASA and subsequent attenuation of platelet functions, including the remarkable inhibition of platelet aggregation through a potent blockage of cyclooxygenase-1 (COX-1). After intravenous administration, ASA-RGD-CS@TPP displayed significantly prolonged circulation time and successful prevention of thrombosis in a mouse model. ASA-RGD-CS@TPP was demonstrated to significantly enhance antithrombotic therapy while showing minimal coagulation and hemorrhagic risks and excellent biocompatibility in vivo as compared to free ASA. This platform provides a simple, safe, effective and targeted strategy for the development of antithrombotic nanomedicines.

Chitosan-Based Composite Membranes with Different Biocompatible Metal Oxide Nanoparticles: Physicochemical Properties and Drug-Release Study

Chitosan (CS) composite membranes were prepared using different biocompatible metal oxide nanoparticles (NPs): titanium dioxide (TiO₂); iron oxide (Fe₃O₄); and aluminum oxide (Al₂O₃). For each nanoparticle, the CS-based composite membranes were prepared with two NPs contents in the CS solution, high (H) and low (L) NPs concentrations. To establish both concentrations, the NPs saturation point in the CS polymeric matrix was determined. The influence of NP concentrations on the physicochemical properties of the CS films was assessed. The prepared CS membranes were characterized with different techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and zeta potential. It was found that the addition of NPs in the CS matrix improved both swelling and mechanical properties. Nanocomposite CS membranes could be prepared using Al₂O₃ NPs. Swelling experiments revealed different pH-sensitive mechanisms, which might be beneficial in biomedical applications since solute permeation through CS-based composite membranes could be controlled by adjusting environmental conditions. When aspirin transport (ASA) through the prepared membranes was carried out in different release media, SGF (simulating gastric fluid) and SIF (simulating intestinal fluid without enzymes), it was observed that the Fickian diffusion coefficient (D) was conditioned by the pH of the release solution. In SGIT (simulating gastrointestinal transit) medium, a transition time (t_trans) was detected due to the shrinkage of the CS polymeric chains, and the drug release depended not only on the Fickian's diffusion but also on the shrinkage of the biopolymer, obeying Peppas and Sahlin equation.

Synthesis and characterization of CoxFe1-xFe2O4 nanoparticles by anionic, cationic, and non-ionic surfactant templates via co-precipitation

The cobalt ferrite nanoparticles (Co_xFe_1-xFe₂O₄) were synthesized by the surfactant templated co-precipitation method using various surfactants namely sodium dodecyl sulfate (SDS), hexadecyltrimethylammonium bromide (CTAB), and Tween20. Under the substitution, the Co_xFe_1-xFe₂O₄ particles were synthesized at various Co²⁺ and Fe²⁺ mole ratios (x = 1, 0.6, 0.2, and 0) with the SDS. The cobalt ferrite nanoparticles were characterized for their morphology, structure, magnetic, and electrical properties. All Co_xFe_1-xFe₂O₄ nanoparticles showed the nanoparticle sizes varying from 16 to 43 nm. In the synthesis of CoFe₂O₄, the SDS template provided the smallest particle size, whereas the saturated magnetization (M_s) of CoFe₂O₄ was reduced by using CTAB, SDS, and Tween20. For the Co_xFe_1-xFe₂O₄ as synthesized by the SDS template at 1.2 CMC, the M_s increased with increasing Fe²⁺ mole ratio. The highest M_s of 100.4 emu/g was obtained from the Fe₃O₄ using the SDS template. The Fe₃O₄ nanoparticle is potential to be used in various actuator and biomedical devices.

Recent advances in co-delivery nanosystems for synergistic action in cancer treatment

Nanocarrier delivery systems have been widely studied to carry unique or dual chemical drugs. The major challenge of chemotherapies is to overcome the multidrug-resistance (MDR) of cells to antineoplastic medicines. In this context, nano-scale technology has allowed researchers to develop biocompatible nano-delivery systems to overcome the limitation of chemical agents. The development of nano-vehicles may also be directed to co-deliver different agents such as drugs and genetic materials. The delivery of nucleic acids targeting specific cells is based on gene therapy principles to replace the defective gene, correct genome errors or knock-down a particular gene. Co-delivery systems are attractive strategies due to the possibility of achieving synergistic therapeutic effects, which are more effective in overcoming the MDR of cancer cells. These combined therapies can provide better outcomes than separate delivery approaches carrying either siRNA, miRNA, pDNA, or drugs. This article reviews the main design features that need to be associated with nano-vehicles to co-deliver drugs, genes, and gene-drug combinations with efficacy. The advantages and disadvantages of co-administration approaches are also overviewed and compared with individual nanocarrier systems. Herein, future trends and perspectives in designing novel nano-scale platforms to co-deliver therapeutic agents are also discussed.

Incorporation of SPION-casein core-shells into silk-fibroin nanofibers for cardiac tissue engineering

Mimicking the structure of extracellular matrix (ECM) of myocardium is necessary for fabrication of functional cardiac tissue. The superparamagnetic iron oxide nanoparticles (SPIONs, Fe₃ O₄ ), as new generation of magnetic nanoparticles (NPs), are highly intended in biomedical studies. Here, SPION NPs (1 wt%) were synthesized and incorporated into silk-fibroin (SF) electrospun nanofibers to enhance mechanical properties and topography of the scaffolds. Then, the mouse embryonic cardiac cells (ECCs) were seeded on the scaffolds for in vitro studies. The SPION NPs were studied by scanning electron microscope (SEM), X-ray diffraction (XRD), and transmission electron microscope (TEM). SF nanofibers were characterized after incorporation of SPIONs by SEM, TEM, water contact angle measurement, and tensile test. Furthermore, cytocompatibility of scaffolds was confirmed by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. SEM images showed that ECCs attached to the scaffolds with elongated morphologies. Also, the real-time PCR and immunostaining studies approved upregulation of cardiac functional genes in ECCs seeded on the SF/SPION-casein scaffolds including GATA-4, cardiac troponin T, Nkx 2.5, and alpha-myosin heavy chain, compared with the ones in SF. In conclusion, incorporation of core-shells in SF supports cardiac differentiation, while has no negative impact on ECCs' proliferation and self-renewal capacity.

Design of Scorodite@Fe3O4 Core–Shell Materials and the Fe3O4 Shell Prevents Leaching of Arsenic from Scorodite in Neutral and Alkaline Environments

In recent years, arsenic pollution has seriously harmed human health. Arsenic-containing waste should be treated to render it harmless and immobilized to form a stable, solid material. Scorodite (iron arsenate) is recognized as the best solid arsenic material in the world. It has the advantages of high arsenic content, good stability, and a low iron/arsenic molar ratio. However, scorodite can decompose and release arsenic in a neutral and alkaline environment. Ferroferric oxide (Fe3O4) is a common iron oxide that is insoluble in acid and alkali solutions. Coating a Fe3O4 shell that is acid- and alkali-resistant on the surface of scorodite crystals will improve the stability of the material. In this study, a scorodite@Fe3O4 core–shell structure material was synthesized. The synthesized core–shell material was detected by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Raman, and energy-dispersive X-ray spectroscopy (EDS) techniques, and the composition and structure were confirmed. The synthesis condition and forming process were analyzed. Long-term leaching tests were conducted to evaluate the stability of the synthesized scorodite@Fe3O4. The results indicate that the scorodite@Fe3O4 had excellent stability after 20 days of exposure to neutral and weakly alkaline solutions. The inert Fe3O4 shell could prevent the scorodite core from corrosion by the external solution. The scorodite@Fe3O4 core–shell structure material was suitable for the immobilization of arsenic and has potential application prospects for the treatment of arsenic-containing waste.

Synthesis of magnetic functionalized MWCNT nanocomposite through surface RAFT co-polymerization of acrylic acid and N-isopropyl acrylamide for removal of cationic dyes from aqueous solutions

In this study, magnetic multi-walled carbon nanotube (MMWCNT) composites were prepared via surface reversible addition fragmentation chain transfer (RAFT) co-polymerization of acrylic acid (AA) and N-isopropyl acrylamide (NIPAM) in the presence of Fe₃O₄ nanoparticles. First, a novel RAFT agent (RA) was prepared and then immobilized onto the surface of MWCNT to fabricate RA-g-MWCNT. Then, Fe₃O₄ nanoparticles were attached onto the surface of RA-g-MWCNT. Finally, RAFT co-polymerization of AA and NIPAM monomers was carried out via Fe₃O₄-g-RA-g-MWCNT RAFT agent. The structure and morphology of the prepared polymer-coated MWCNT was examined by FTIR, SEM, TEM, XRD, VSM, and TGA. The adsorption behaviours of the cationic dyes were studied. The equilibrium isotherm and kinetics of cationic dyes were investigated. Thermodynamics investigations also depicted that the adsorptions of cationic dyes were spontaneous and endothermic in nature. The synthesized dye adsorbent with high adsorption capacities, reusability, and easy recovery makes it as a good candidate for wastewater treatment.

Preparation and Evaluation of Multifunctional Autofluorescent Magnetic Nanoparticle-Based Drug Delivery Systems Against Mammary Cancer

The Fe₃O₄@C@NaYF₄:Yb,Er nanocarriers of multifunction were synthesized. The mitoxantrone was selected as model drug, and these nanoparticles have high drug loading (0.63 mg/mg). The temperature of Fe₃O₄@C@NaYF₄:Yb,Er in water reached 60°C with 808 nm irritation (2.5 W/cm²). The cumulative release of these nano drug carriers significantly increased because of the increase in temperature, and the 4T1 cell growth inhibition rates were 59.15%, almost 2.25-fold higher than mitoxantrone group (p <0.05). Because the nanoparticles had autofluorescence under 808 nm irritation, the nanocarriers could be traced in both in vitro and in vivo studies. Based on magnetic field, the fluorescence signal of these nano drug carriers could be observed at tumor region during 2-9 h in vivo study. The nanocarriers with magnetic and 808 nm laser group, tumor growth inhibition rate achieved almost 83.14%. These nanoparticles are an outstanding potential carrier for antitumor drugs, which can improve curative effect for tumor while reducing toxicity.

Mesoporous Iron Oxide Synthesized Using Poly(styrene-b-acrylic acid-b-ethylene glycol) Block Copolymer Micelles as Templates for Colorimetric and Electrochemical Detection of Glucose

Herein, we report the soft-templated preparation of mesoporous iron oxide using an asymmetric poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG) triblock copolymer. This polymer forms a micelle consisting of a PS core, a PAA shell, and a PEG corona in aqueous solutions, which can serve as a soft template. The mesoporous iron oxide obtained at an optimized calcination temperature of 400 °C exhibited an average pore diameter of 39 nm, with large specific surface area and pore volume of 86.9 m² g^-1 and 0.218 cm³ g^-1, respectively. The as-prepared mesoporous iron oxide materials showed intrinsic peroxidase-like activities toward the catalytic oxidation of 3,3',5,5'-tertamethylbenzidine (TMB) in the presence of hydrogen peroxide (H₂O₂). This mimetic feature was further exploited to develop a simple colorimetric (naked-eye) and electrochemical assay for the detection of glucose. Both our colorimetric (naked-eye and UV-vis) and electrochemical assays estimated the glucose concentration to be in the linear range from 1.0 μM to 100 μM with a detection limit of 1.0 μM. We envisage that our integrated detection platform for H₂O₂ and glucose will find a wide range of applications in developing various biosensors in the field of personalized medicine, food-safety detection, environmental-pollution control, and agro-biotechnology.

Synthesis, Functionalization, and Design of Magnetic Nanoparticles for Theranostic Applications

In order to translate nanotechnology into medical practice, magnetic nanoparticles (MNPs) have been presented as a class of non-invasive nanomaterials for numerous biomedical applications. In particular, MNPs have opened a door for simultaneous diagnosis and brisk treatment of diseases in the form of theranostic agents. This review highlights the recent advances in preparation and utilization of MNPs from the synthesis and functionalization steps to the final design consideration in evading the body immune system for therapeutic and diagnostic applications with addressing the most recent examples of the literature in each section. This study provides a conceptual framework of a wide range of synthetic routes classified mainly as wet chemistry, state-of-the-art microfluidic reactors, and biogenic routes, along with the most popular coating materials to stabilize resultant MNPs. Additionally, key aspects of prolonging the half-life of MNPs via overcoming the sequential biological barriers are covered through unraveling the biophysical interactions at the bio-nano interface and giving a set of criteria to efficiently modulate MNPs' physicochemical properties. Furthermore, concepts of passive and active targeting for successful cell internalization, by respectively exploiting the unique properties of cancers and novel targeting ligands are described in detail. Finally, this study extensively covers the recent developments in magnetic drug targeting and hyperthermia as therapeutic applications of MNPs. In addition, multi-modal imaging via fusion of magnetic resonance imaging, and also innovative magnetic particle imaging with other imaging techniques for early diagnosis of diseases are extensively provided.

Synthesis of porous GdF3:Er3+,Yb3+-COOH core-shell structured bi-functional nanoparticles for drug delivery

The authors synthesised porous GdF₃:Er³⁺,Yb³⁺-COOH core-shell structured bi-functional nanoparticles through a one-step hydrothermal route during which ethylene diamine tetraacetic acid) was bound to the surface of the nanoparticles. It has high up-conversion emission intensity for monitoring the drug release process and magnetisation saturation value (10.2 emu/g) for drug targeting under foreign magnetic fields. Moreover, porous GdF₃:Er³⁺,Yb³⁺ as drug carriers with a high drug-loading efficiency. cis-Dichlorodiammineplatinum(II) (cisplatin, CDDP)-loaded GdF₃:Er³⁺,Yb³⁺ nanoparticles (GdF₃:Er³⁺,Yb³⁺-CDDP) were characterised by the Fourier transform infrared spectra, and CDDP was loaded in the form of electrostatic interaction and hydrogen bonds. Compared with CDDP alone, GdF₃:Er³⁺,Yb³⁺-CDDP nanoparticles increase concentration of CDDP in the target site and enhance its anticancer efficiency. Therefore, the as-prepared GdF₃:Er³⁺,Yb³⁺-COOH nanoparticles allow simultaneous targeted drug delivery and monitoring as promising anti-cancer theranostic agents.

Biofabrication of Fe nanoparticles in aqueous extract of Hibiscus sabdariffa with enhanced photocatalytic activities

Hibiscus sabdariffa is a strongly basic dye with a large number of medicinal applications and is used for various diagnostic purposes.

A split G-quadruplex DNAzyme based magnetic graphene oxide platform for sensitive authentication of Pseudostellaria heterophylla

Based on the different affinities of graphene oxide (GO) toward ssDNA and dsDNA, a sensitive fluorescence assay utilizing a split G-rich probe and magnetic GO (Fe₃O₄/GO) was developed for authentication of Pseudostellaria heterophylla based on the ITS sequences.

Carbon-Coated Gold Nanorods: A Facile Route to Biocompatible Materials for Photothermal Applications

Gold nanorods and their core-shell nanocomposites have been widely studied because of their well-defined anisotropy and unique optical properties and applications. This study demonstrates a facile hydrothermal synthesis strategy for generating carbon coating on gold nanorods (AuNRs@C) under mild conditions (<200 °C), where the carbon shell is composed of polymerized sugar molecules (glucose). The structure and composition of the produced core-shell nanocomposites were characterized using advanced microscopic and spectroscopic techniques. The functional properties, particularly the photothermal and biocompatibility properties of the produced AuNRs@C, were quantified to assess their potential in photothermal hyperthermia. These AuNRs@C were tested in vitro (under representative treatment conditions) using near-infrared (NIR) light irradiation. It was found that the AuNRs produced here exhibit exemplary heat generation capability. Temperature changes of 10.5, 9, and 8 °C for AuNRs@C were observed with carbon shell thicknesses of 10, 17, and 25 nm, respectively, at a concentration of 50 μM, after 600 s of irradiation with a laser power of 0.17 W/cm(2). In addition, the synthesized AuNRs@C also exhibit good biocompatibility toward two soft tissue sarcoma cell lines (HT1080, a fibrosarcoma; and GCT, a fibrous histiocytoma). The cell viability study shows that AuNRs@C (at a concentration of <0.1 mg/mL) core-shell particles induce significantly lower cytotoxicity on both HT1080 and GCT cell lines, as compared with cetyltrimethylammonium bromide (CTAB)-capped AuNRs. Furthermore, similar to PEG-modified AuNRs, they are also safe to both HT1080 and GCT cell lines. This biocompatibility results from a surface full of -OH or -COH groups, which are suitable for linking and are nontoxic Therefore, the AuNRs@C represent a viable alternative to PEG-coated AuNRs for facile synthesis and improved photothermal conversion. Overall, these findings open up a new class of carbon-coated nanostructures that are biocompatible and could potentially be employed in a wide range of biomedical applications.

Cyclodextrin polymer/Fe3O4 nanocomposites as solid phase extraction material coupled with UV-vis spectrometry for the analysis of rutin

In this paper, carboxymethyl-hydroxypropyl-β-cyclodextrin polymer modified magnetic particles Fe3O4 (CM-HP-β-CDCP-MNPs) were prepared and applied to magnetic solid phase extraction of rutin combined with UV-visible spectrometry detection. The synthesized magnetic particles were characterized by element analysis, Fourier transform infrared spectra, thermal gravimetric analysis, and transmission electron microscopy. Several variables affecting the extraction and desorption of rutin such as pH, the amount of adsorbent, the type and volume of eluent, extraction and desorption time, and temperature were investigated. The maximum adsorption capacity was 67.0 mg g(-1) for rutin with the equilibrium time of 30 min at room temperature, and the adsorbent could be reused for 10 times. A calibration curve was linear in the range of 0.05-8.00 μg mL(-1) with a relative standard deviation of 2.9% (n=5, c=4.0 μg mL(-1)). The limit of detection was 7.0 ng mL(-1). The interaction mechanism between the adsorbent and rutin was also studied. Feasibility of this method was validated by the analysis of rutin tablets and lotus plumule.

Promising iron oxide-based magnetic nanoparticles in biomedical engineering

For the past few decades biomedical engineering has imprinted its significant impact on the map of science through its wide applications on many other fields. An important example obviously proving this fact is the versatile application of magnetic nanoparticles in theranostics. Due to preferable properties such as biocompatibility, non-toxicity compared to other metal derivations, iron oxide-based magnetic nanoparticles was chosen to be addressed in this review. Aim of this review is to give the readers a whole working window of these magnetic nanoparticles in the current context of science. Thus, preparation of magnetic iron oxide nanoparticles with the so-far techniques, methods of characterizing the nanoparticles as well as their most recent biomedical applications will be stated.