Optimization of the microencapsulation of synthetic strawberry flavour with different blends of encapsulating agents using spray drying

Zero-waste multistage utilization of dandelion root

Introduction

In the fragrance and perfume industry, the controlled release of fragrances are crucial factors that contribute to consumer appeal and product quality enhancement. In this study, various aromatic active substances were extracted from dandelion root (DR), which was subsequently calcined to produce high-performance porous biochar material.

Methods

The dandelion root biochar (DRB) material was identified as promising adsorbents for the controlled release of fragrances. Furfuryl alcohol was chosen as the model fragrance for inclusion and controlled release studies.

Results and discussion

The DRB exhibited a substantial specific surface area of 991.89 m2/g, facilitating efficient storage and controlled release capabilities. Additionally, the DRB's high stability and porous nature facilitated rapid collection and efficient recyclability. This research significantly contributes to the development of a sustainable, zero-waste multistage utilization strategy for dandelion roots, indicating a potential applications in the food flavoring industry and environmental conservations.

Strategies for improving loading of emulsion-based functional oil powder

Functional oil is type of oil that is beneficial to human health and has nutritional value, however, functional oils are rich in bioactive substances such as polyunsaturated fatty acids which are sensitive to environmental factors and are susceptible to oxidation or decomposition. Construction of emulsion-based oil powder is a promising approach for improving the stability and solubility of functional oils. However, the low effective loading of oil in powder is the main challenge limiting encapsulation technology. This manuscript focuses on reviewing the current research progress of emulsion-based functional oil powder construction and systematically summarizes the processing characteristics of emulsion-based oil powder with high payload and summarizing the strategies to enhance the payload of powder in term of emulsification and drying, respectively. The impact of emulsion formation on oil powder production is discussed from different characteristics of emulsions, including emulsion composition, emulsification methods and emulsion types. In addition, the current status of improving material loading performance by various modifications to the drying technology is discussed, including the addition of drying processing additives, changes in drying parameters and the effect of innovative technological means.

Flavour encapsulation: A comparative analysis of relevant techniques, physiochemical characterisation, stability, and food applications

Flavour is an important component that impacts the quality and acceptability of new functional foods. However, most flavour substances are low molecular mass volatile compounds, and direct handling and control during processing and storage are made difficult due to susceptibility to evaporation, and poor stability in the presence of air, light, moisture and heat. Encapsulation in the form of micro and nano technology has been used to address this challenge, thereby promoting easier handling during processing and storage. Improved stability is achieved by trapping the active or core flavour substances in matrices that are referred to as wall or carrier materials. The latter serve as physical barriers that protect the flavour substances, and the interactions between carrier materials and flavour substances has been the focus of many studies. Moreover, recent evidence also suggests that enhanced bioavailability of flavour substances and their targeted delivery can be achieved by nanoencapsulation compared to microencapsulation due to smaller particle or droplet sizes. The objective of this paper is to review several relevant aspects of physical-mechanical and physicochemical techniques employed to stabilize flavour substances by encapsulation. A comparative analysis of the physiochemical characterization of encapsulates (particle size, surface morphology and rheology) and the main factors that impact the stability of encapsulated flavour substances will also be presented. Food applications as well as opportunities for future research are also highlighted.

Microencapsulation of steroidal saponins from agave sap concentrate using different carriers in spray drying

Concentrated agave sap is a product with in vivo proven hypocholesterolemic and hypoglycemic activities, as well as in vitro anticancer potential. In the present work, a factorial design was used to determine the suitable drying conditions of concentrated agave by studying the effect of inlet temperature (150 °C, 180 °C and 210 °C) and the type of carrier agent (maltodextrin, hydroxypropyl methylcellulose, guar gum and xanthan gum). The response variables for each treatment were the product recovery and microencapsulated saponins. Further characterization of concentrated agave powders was performed: solubility in water, hygroscopicity, moisture content, tap density, bulk density, Carr's index followability and morphology by scanning electron microscopy analysis. The hydroxypropyl methylcellulose proved to improve physicochemical properties and enhance product yield, using 210 °C inlet temperature and a mix of carrier agents of maltodextrin/hydroxypropyl methylcellulose/xanthan gum at 50/48.5/1.5 (w/w/w) proportion exhibited the highest saponin recovery of 53.81%. Moreover, different carrier agents in powders revealed two shapes, regular spherical shape with smooth surface and collapsed shapes. The use of polymers excipients helped to decrease the stickiness of the desired product and enhanced the powder stability and microencapsulation of the steroidal saponins.

Facile synthesis of starch and tellurium doped SrO nanocomposite for catalytic and antibacterial potential: In silico molecular docking studies

A chemical co-precipitation route was used to synthesize novel strontium oxide (SrO), SrO-starch composite and various tellurium (Te) concentrations were incorporated in SrO-starch composite. This study aims to enhance the catalytic activities and bactericidal behavior of SrO, SrO-starch composite with different percentage concentrations of Te doping and a fixed amount of starch nanoparticles. XRD affirmed that the dopant contribution was investigated to improve crystallinity. Surface morphological characteristics and elemental composition evaluation were determined using an FE-SEM and EDS exhibit a doping concentration of an element in the synthesized products. The configuration of Sr-O-Sr bonds and molecular vibrations has been indicated by FTIR spectra. In addition, dye degradation of prepared samples was investigated through catalytic activity (CA) in the existence of NaBH₄ act as a reduction representative. The Te-doped SrO-starch composite indicates superior catalytic activity and shows a degradation of Methylene blue dye (91.4 %) in an acidic medium. The synthesis nanocatalyst demonstrated impressive antibacterial activity against Staphylococcus aureus (S. aureus) at high and low concentrations exhibiting zones of inhibition 9.30 mm as compared to ciprofloxacin. Furthermore, molecular docking studies of synthesized nanocomposites were performed against selected enzyme targets, i.e., β-lactamase_E.coli and DNA Gyrase_E.coli.

Determination Freeze Drying Characteristics of Ottoman Strawberries

This study was performed to define the kinetic drying model and to define the effective diffusivity coefficient of the fruit, which is called ottoman strawberries in the literature. In the study, strawberries by the weight of 100 g and with a thickness of 5 mm were placed in the drying device, and the data were processed by observing the weight loss every two hours after being subjected to the drying process for 14 hours. 8 different kinetic drying models were applied to the acquired data using the MATLAB program. As a result of the application, the estimated standard errors (RMSE), chi-square (X2), regression coefficients (R2) were calculated, error analysis was performed, R2, X2, and RMSE values were found, as 9,998×10-1, 6,993×10-5 and 0.7242×10-2. According to these results, it was determined that the most suitable model is the Page model. Also, the effective diffusivity coefficients for ottoman strawberries were calculated as 2.73286 × 10-10 m2/s. It was confirmed that the calculated effective diffusivity value was within the reference range mentioned in the literature (10-12 m2/s – 10-8 m2/s) for food products.

Microencapsulation and Bioaccessibility of Phenolic Compounds of Vaccinium Leaf Extracts

In recent years, Vaccinium spp. (bilberry-VMT, lingonberry-VVIT, and blueberry-VCS) have sparked particular interest for their prospective health benefits. The latest investigations have place them as important alternative sources of nutraceuticals as their leaves are the main by-products of berry harvesting. The present study is aimed at investigating the bioaccessibility of phenolic compounds from leaves of the Vaccinium species, both as microencapsulated powder and aqueous extracts, following exposure to in vitro simulated digestion. Moreover, the impact of maltodextrin and glucose microencapsulation carriers on the extracts’ phenolic content was assessed. Prior to encapsulation, the viscosity of the emulsions was shown at a shear stress of 50 s−1 dilatant and a Newtonian behaviour above this value with a final viscosity between 1.024 and 1.049 mPa·s. The final microencapsulation yield for the samples ranged between 79 and 81%. Although the microencapsulated forms presented a targeted release at the intestinal level, the phenolic content decreased after gastrointestinal digestion. The bioaccessibility of the microencapsulated extracts showed higher values than their non-encapsulated counterparts, with the highest value of 45.43% in the VVIT sample, followed by VCS with 41.07%. However, the non-encapsulated VCS sample presented high bioaccessibility after in vitro digestion (38.65%). As concluded, further in vivo research should be conducted on the leaves of the Vaccinium species.

Encapsulation of anthocyanin-rich extract from black chokeberry (Aronia melanocarpa) pomace by spray drying using different coating materials

This study aimed to encapsulate the anthocyanin-rich extract from black chokeberry pomace by using maltodextrin with different DE values as the base coating material and its blends with gum Arabic, xanthan gum or whey protein isolate.

Current trends in flavor encapsulation: A comprehensive review of emerging encapsulation techniques, flavour release, and mathematical modelling

Food flavors are volatile compounds that impact the human sensory perception profoundly and find extensive applications in various food products. Because of their volatility and high sensitivity to pH, temperature, oxidation, and external conditions, they require adequate protection to last for a longer duration. Encapsulation plays a critical role in preserving food flavors by enhancing their thermal and oxidative stability, overcoming volatility limitations, and regulating their rapid release with improved bioavailability in food products. The current review focuses on the recent developments in food flavor encapsulation techniques, such as electrospinning/spraying, cyclodextrin inclusion complexes, coacervation, and yeast cell micro-carriers. The review also comprehensively discusses the role of encapsulants in achieving controlled flavor release, the mechanisms involved, and the mathematical modelling for flavor release. Specific well-established nanoencapsulation techniques render better encapsulation efficiency and controlled release of flavor compounds. The review examined specific emerging methods for flavor encapsulation, such as yeast cell encapsulation, which require further exploration and development. This article provides readers with up-to-date information on different encapsulation processes and coating methods used for flavor encapsulation.

Inclusion Complexes of Concentrated Orange Oils and β-Cyclodextrin: Physicochemical and Biological Characterizations

Concentrated orange oils (5x, 10x, 20x) are ingredients used in different industries as components of flavors and aromas due to their great organoleptic qualities. This research focuses on the search for alternative uses for their application through encapsulation in inclusion complexes with β-cyclodextrin (β-CD). Inclusion complexes of concentrated orange oils (COEO) and β-CD were developed by the co-precipitated method in ratios of 4:96, 12:88, and 16:84 (w/w, COEO: β-CD). The best powder recovery was in the ratio 16:84 for the three oils, with values between 82% and 84.8%. The 20x oil in relation 12:88 showed the highest entrapment efficiency (89.5%) with 102.3 mg/g of β-CD. The FT-IR analysis may suggest an interaction between the oil and the β-CD. The best antioxidant activity was observed in the ratio 12:88 for the three oils. The antifungal activity was determined for all the inclusion complexes, and the 10x fraction showed the highest inhibition at a concentration of 10 mg/mL in ratios 12:88 and 16:84. Antibacterial activity was determined by the minimum inhibitory concentration (MIC) and was found at a concentration of 1.25 mg/mL in ratios 12:88 and 16:84 for 5x and 20x oils.

Spray Drying for the Encapsulation of Oils-A Review

The application of the spray drying technique in the food industry for the production of a broad range of ingredients has become highly desirable compared to other drying techniques. Recently, the spray drying technique has been applied extensively for the production of functional foods, pharmaceuticals and nutraceuticals. Encapsulation using spray drying is highly preferred due to economic advantages compared to other encapsulation methods. Encapsulation of oils using the spray drying technique is carried out in order to enhance the handling properties of the products and to improve oxidation stability by protecting the bioactive compounds. Encapsulation of oils involves several parameters-including inlet and outlet temperatures, total solids, and the type of wall materials-that significantly affect the quality of final product. Therefore, this review highlights the application and optimization of the spray drying process for the encapsulation of oils used as food ingredients.

Cellulose as a Delivery System of Raspberry Juice Volatiles and Their Stability

Formulation of delivery systems for active ingredients is of increasing importance for the food industry. For that purpose, we selected cellulose as a carrier polymer of raspberry volatiles. Freeze-dried cellulose/raspberry complexes were prepared by complexation of raspberry juice (constant amount) and cellulose (2.5%, 5%, 7.5% and 10%). In our study, cellulose was shown as a good carrier of raspberry juice volatiles. Thirty-nine volatiles were detected in raspberry juice while 11 of them were lost during preparation of the complexes. Berry flavor note was the dominant one in raspberry juice (40% of overall flavor), followed by citrus and woody notes (each around 18% of overall flavor) and floral, fruity, and green (each around 8% of overall flavor). Cellulose/raspberry complexes had different flavor profiles, but a berry flavor note was still the dominant one in all complexes. These results suggest an efficient plant-based approach to produce value-added cellulose/volatile dry complexes with possible utility as food flavoring ingredients.

Changes in the Crystallinity Degree of Starch Having Different Types of Crystal Structure after Mechanical Pretreatment

This paper examines the effect of mechanical activation on the amorphization of starch having different types of crystalline structure (A-type corn starch; B-type potato starch; and C-type tapioca starch). Structural properties of the starches were studied by X-ray diffraction analysis. Mechanical activation in a planetary ball mill reduces the degree of crystallinity in proportion to pretreatment duration. C-type tapioca starch was found to have the highest degree of crystallinity. Energy consumed to achieve complete amorphization of the starches having different types of crystalline structure was measured. The kinetic parameters of the process (the effective rate constants) were determined. The rate constant and the strongest decline in the crystallinity degree after mechanical activation change in the following series: C-type starch, A-type starch, and B-type starch.

Advances in the Application of Microcapsules as Carriers of Functional Compounds for Food Products

Natural bioactive compounds and living cells have been reported as promising products with beneficial properties to human health. The constant challenge regarding the use of these components is their easy degradation during processing and storage. However, their stability can be improved with the microencapsulation process, in which a compound sensitive to adverse environmental conditions is retained within a protective polymeric material. Microencapsulation is a widely used methodology for the preservation and stabilization of functional compounds for food, pharmaceutical, and cosmetic applications. The present review discusses advances in the production and application of microcapsules loaded with functional compounds in food products. The main methods for producing microcapsules, as well as the classes of functional compounds and wall materials used, are presented. Additionally, the release of compounds from loaded microcapsules in food matrices and in simulated gastrointestinal conditions is also assessed.