Chromium(III) and (VI) tolerance and bioaccumulation in yeast: a survey of cellular chromium content in selected strains of representative genera

La-doped MIL-88B(Fe)-NH2: a mixed-metal-organic framework photocatalyst for highly efficient reduction of Cr(vi) in an aqueous solution

With the aim to resolve the problem of water pollution, we herein propose a new photocatalyst based on metal-organic frameworks (MOFs), called La-doped MIL-88B(Fe)-NH2 (MIL-88B((1 - x)Fe/xLa)-NH2), which was designed and employed for the photocatalytic reduction of Cr(vi) in aqueous solutions. MIL-88B((1-x)Fe/xLa)-NH2 materials with different x values were synthesized via a one-pot solvothermal method. Their characteristics were investigated using various techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Brunauer-Emmett-Teller (BET) analysis, Fourier-transform infrared (FT-IR) spectroscopy and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS). We found that compared to pristine MIL-88B(Fe)-NH2 with a photocatalytic efficiency of 67.08, MIL-88B((1 - x)Fe/xLa)-NH2 materials with x = 0.010, 0.025 and 0.050 exhibit excellent photocatalytic efficiencies reaching 88.21, 81.19 and 80.26%, respectively, after only 30 minutes of irradiation at a small catalyst dosage of 0.2 g L-1. These La-doped MIL-88B(Fe)-NH2 photocatalysts can work well under mild conditions (pH = 6). Furthermore, they are robust-can be recycled for at least four consecutive runs without any activity loss. This novel material is promising for the photocatalytic degradation of pollutants.

Microbial innovations in chromium remediation: mechanistic insights and diverse applications

The ubiquity of hexavalent chromium (Cr(VI)) from industrial activities poses a critical environmental threat due to its persistence, toxicity and mutagenic potential. Traditional physico-chemical methods for its removal often entail significant environmental drawbacks. Recent advancements in remediation strategies have emphasized nano and bioremediation techniques as promising avenues for cost-effective and efficient Cr(VI) mitigation. Bioremediation harnesses the capabilities of biological agents like microorganisms, and algae to mitigate heavy metal contamination, while nano-remediation employs nanoparticles for adsorption purposes. Various microorganisms, including E. coli, Byssochlamys sp., Pannonibacter phragmitetus, Bacillus, Aspergillus, Trichoderma, Fusarium, and Chlorella utilize bioreduction, biotransformation, biosorption and bioaccumulation mechanisms to convert Cr(VI) to Cr(III). Their adaptability to different environments and integration with nanomaterials enhance microbial activity, offering eco-friendly solutions. The study provides a brief overview of metabolic pathways involved in Cr(VI) bioreduction facilitated by diverse microbial species. Nitroreductase and chromate reductase enzymes play key roles in nitrogen and chromium removal, with nitroreductase requiring nitrate and NADPH/NADH, while the chromium reductase pathway relies solely on NADPH/NADH. This review investigates the various anthropogenic activities contributing to Cr(VI) emissions and evaluates the efficacy of conventional, nano-remediation, and bioremediation approaches in curbing Cr(VI) concentrations. Additionally, it scrutinizes the mechanisms underlying nano-remediation techniques for a deeper understanding of the remediation process. It identifies research gaps and offers insights into future directions aimed at enhancing the real-time applicability of bioremediation methods for mitigating with Cr(VI) pollution and pave the way for sustainable remediation solutions.

Multiresponsive luminescent sensors for antibiotics and CrVI with two luminescent ZnII/CdII coordination complexes

Two new ZnII/CdII luminescent coordination polymers (CPs) based on the V-shaped bis(imidazole) ligand 3,6-bis (1H-benzo[d]imidazol-1-yl)-9-methyl-9H-carbazole (bbimc) with [1,1'-biphenyl]-4,4'-dicarboxylic acid ligand (H2bpdc) have been synthesized under solvothermal conditions: {[Zn(bbimc)(bpdc)]·DMF·2.5H2O} (CP 1), {[Cd(bbimc)(bpdc)]·2DMF} (CP 2). CP 1 and CP 2 both display a uninodal 4-c unimodal sql topology 2D framework with vertex symbols of {44·62}. In addition, the two identical 2D nets of CP 2 were interpenetrated each other to form a 2D + 2D → 3D and generate a 2-fold interpenetrating architecture. Moreover, sensing investigations of CP 1 and CP 2 revealed that both of compounds can be used as a highly sensitive and selective multi-responsive luminescent sensor for sensing Cr2O72-, CrO42- and antibiotics (TC: Tetracycline; CTC: Chlortetracycline) in H2O by exhibiting fluorescence quenching with significant quenching constants (Ksv = 1.369 × 104 M-1 (Cr2O72-), 2.003 × 104 M-1 (CrO42-), 5.343 × 104 M-1 (TC), 8.706 × 104 M-1 (CTC) for CP 1 and 4.452 × 104 M-1 (Cr2O72-), 2.119 × 104 M-1 (CrO42-), 4.175 × 104 M-1 (TC), 1.257 × 105 M-1 (CTC) for CP 2). The detection limit are 0.67 μM (Cr2O72-), 0.48 μM (Cr2O72-), 0.23 μM (TC), 0.14 μM (CTC) for CP 1 and 0.28 μM (Cr2O72-), 0.54 μM (CrO42-), 0.31 μM (TC), 0.098 μM (CTC) for CP 2, respectively. In addition, the probable fluorescence quenching mechanism was studied through experiment and theoretical calculation and the co-existance of competitive absorption (CA) and photoinduced electron transfer (PET) progress contributed to such sensing processes.

A new turn on coumarin-based fluorescence probe for Cr3+ detection in aqueous solution

Isatin-3-(7'-Methoxychromone-3'-methylidene) hydrazone (L) was synthesized based on chromone schiff base, and used to construct a novel sensor to detect Cr3+. Fluorescence detection experiments were carried out for a range of different concentrations of Cr3+ in aqueous solutions. A concentration calculation model was built on the basis of eliminating interference of excitation spectrum in the fluorescence spectra with mathematical method. Results showed that probe L displayed a 70-fold fluorescence enhancement upon the addition of Cr3+ due to the photo-induced electron transfer (PET) effect. On the other hand, metal ions except Cr3+ did not cause significant change in either the absorption or the fluorescence spectrum of L. In addition, L showed a good selectivity to Cr3+ over other metal cations, especially Al3+ and Cu2+. The probe L can detect Cr3+ highly and selectively by the direct chelation enhanced fluorescence with a detection limit of 3.14 × 10-6 M. Furthermore, benefiting from their good water solubility and biocompatibility, cell imaging and real-time monitoring of Cr3+ in living HepG2 cells were successfully achieved.

Rhodotorula mucilaginosa YR29 is able to accumulate Pb2+ in vacuoles: a yeast with bioremediation potential

Microorganisms showed unique mechanisms to resist and detoxify harmful metals in response to pollution. This study shows the relationship between presence of heavy metals and plant growth regulator compounds. Additionally, the responses of Rhodotorula mucilaginosa YR29 isolated from the rhizosphere of Prosopis sp. growing in a polluted mine jal in Mexico are presented. This research carries out a phenotypic characterization of R. mucilaginosa to identify response mechanisms to metals and confirm its potential as a bioremediation agent. Firstly, Plant Growth-Promoting (PGP) compounds were assayed using the Chrome Azurol S (CAS) medium and the Salkowski method. In addition, to clarify its heavy metal tolerance mechanisms, several techniques were performed, such as optical microscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) supplemented with assorted detectors. Scanning transmission electron microscopy (STEM) was used for elementary mapping of the cell. Finally, yeast viability after all treatments was confirmed by confocal laser scanning microscopy (CLSM). The results have suggested that R. mucilaginosa could be a PGP yeast capable of triggering Pb²⁺ biosorption (representing 22.93% of the total cell surface area, the heavy metal is encapsulated between the cell wall and the microcapsule), and Pb²⁺ bioaccumulation (representing 11% of the total weight located in the vacuole). Based on these results, R. mucilaginosa as a bioremediation agent and its wide range of useful mechanisms for ecological purposes are highlighted.

Ecological effects, remediation, distribution, and sensing techniques of chromium

Chromium is detected in most ecosystems due to the increased anthropogenic activities in addition to that developed from natural pollution. Chromium contamination in the food chain results due to its persistent and non-degradable nature. The release of chromium in the ecosystem accretes and thereafter impacts different life forms, including humans, aquatic and terrestrial organisms. Leaching of chromium into the ground and surface water triggers several health ailments, such as dermatitis, eczematous skin, allergic reactions, mucous and skin membrane ulcerations, allergic asthmatic reactions, bronchial carcinoma and gastroenteritis. Physiological and biological treatments for the removal of chromium have been discussed in depth in the present communication. Adsorption and biological treatment methods are proven to be alternatives to chemical removal techniques in terms of cost-effectiveness and low sludge formation. Chromium sensing is an alternative approach for regular monitoring of chromium in different water bodies. This review intended to explore different classes of sensors for chromium monitoring. However, the spectrochemical methods are more sensitive in chromium ions sensing than electrochemical methods. Future study should focus on miniaturization for portability and on-site measurements without requiring a large instrument provides a good aspect for future research.

Multifunctional luminescent Zr(IV)-MOF for rapid and efficient detection of vanillin, CrO42- and Cr2O72- ions

Fast and efficient detection of pollutants in the food or wastewater is an urgent need for protecting human health and ecological environment. Herein, a luminescent Zr(IV)-MOF (HBU-20) has been conveniently synthesized. It could be used as a fluorescent probe for detection of vanillin, CrO₄^2-, and Cr₂O₇^2- in aqueous medium. All the fluorescence response time is less than 10 s and the detection limits of vanillin, CrO₄^2- and Cr₂O₇^2- achieve 0.38 μM, 0.065 μM and 0.0089 μM, respectively. Interestingly, common anions, cations and amino acids in the solution can not affect the fluorescence detection. Meanwhile, the fluorescence detection process can be successfully implemented even under strong acid or strong alkaline conditions. Further research shows that the inner filter effect (IFE) plays a major role in the sensing process. The rapid and sensitive fluorescence responses indicate that the compound is a promising multifunctional probe for sensing toxic substance. The results can provide an important reference for the design of new fluorescent probes.

Accumulation and Enrichment of Trace Elements by Yeast Cells and Their Applications: A Critical Review

Maintaining the homeostasis balance of trace elements is crucial for the health of organisms. Human health is threatened by diseases caused by a lack of trace elements. Saccharomyces cerevisiae has a wide and close relationship with human daily life and industrial applications. It can not only be used as fermentation products and single-cell proteins, but also as a trace elements supplement that is widely used in food, feed, and medicine. Trace-element-enriched yeast, viz., chromium-, iron-, zinc-, and selenium-enriched yeast, as an impactful microelements supplement, is more efficient, more environmentally friendly, and safer than its inorganic and organic counterparts. Over the last few decades, genetic engineering has been developing large-scaled genetic re-design and reconstruction in yeast. It is hoped that engineered yeast will include a higher concentration of trace elements. In this review, we compare the common supplement forms of several key trace elements. The mechanisms of detoxification and transport of trace elements in yeast are also reviewed thoroughly. Moreover, genes involved in the transport and detoxification of trace elements are summarized. A feasible way of metabolic engineering transformation of S. cerevisiae to produce trace-element-enriched yeast is examined. In addition, the economy, safety, and environmental protection of the engineered yeast are explored, and the future research direction of yeast enriched in trace elements is discussed.

Assembly of a Zn(II) coordination polymer of tetrapyridyl tetraene ligands for selective sensing of CrO42- and Fe3+ in water via luminescence quenching and enhancement

Four Zn(II)-based coordination polymers (CPs), [Zn(4-tkpvb)(FB)2] (CP1), [Zn(4-tkpvb)(CB)2] (CP2), [Zn(4-tkpvb)(BB)2] (CP3) and [Zn(4-tkpvb)(NTP)]n (CP4), were prepared from solvothermal reactions of Zn(NO3)2•6H2O with 1,2,4,5-tetrakis((E)-2-(pyridin-4-yl)vinyl)benzene (4-tkpvb) in the presence of 3-florobenzoic acid...

Rhizosphere Bacteria in Plant Growth Promotion, Biocontrol, and Bioremediation of Contaminated Sites: A Comprehensive Review of Effects and Mechanisms

Agriculture in the 21st century is facing multiple challenges, such as those related to soil fertility, climatic fluctuations, environmental degradation, urbanization, and the increase in food demand for the increasing world population. In the meanwhile, the scientific community is facing key challenges in increasing crop production from the existing land base. In this regard, traditional farming has witnessed enhanced per acre crop yields due to irregular and injudicious use of agrochemicals, including pesticides and synthetic fertilizers, but at a substantial environmental cost. Another major concern in modern agriculture is that crop pests are developing pesticide resistance. Therefore, the future of sustainable crop production requires the use of alternative strategies that can enhance crop yields in an environmentally sound manner. The application of rhizobacteria, specifically, plant growth-promoting rhizobacteria (PGPR), as an alternative to chemical pesticides has gained much attention from the scientific community. These rhizobacteria harbor a number of mechanisms through which they promote plant growth, control plant pests, and induce resistance to various abiotic stresses. This review presents a comprehensive overview of the mechanisms of rhizobacteria involved in plant growth promotion, biocontrol of pests, and bioremediation of contaminated soils. It also focuses on the effects of PGPR inoculation on plant growth survival under environmental stress. Furthermore, the pros and cons of rhizobacterial application along with future directions for the sustainable use of rhizobacteria in agriculture are discussed in depth.

Structural Design of Low Toxicity Metal-Organic Frameworks for Multifunction Detection of Organic and Inorganic Contaminants from Water

Metal-organic frameworks (MOFs)-based sensors for monitoring toxic substances in wastewater have attracted great attention due to the efficient and reliable performance. Here, we has synthesized two novel zinc-based MOFs [Zn(ttb)₂(H₂O)₂]_n (Zn1-ttb) and {[Zn(ttb)₂]·0.5CH₃CN}_n (Zn2-ttb) through changing the polarity of reaction solvents and finally obtained target 2D MOF material [Zn(ttb)(bdc)_0.5]_n(Zn3-ttb-bdc) by successfully introducing an ancillary ligand H₂bdc (Httb = 1-(triazo-1-ly)-4-(tetrazol-5-ylmethyl)benzene, H₂bdc = 1,4-benzenedicarboxylic acid). As-prepared Zn3-ttb-bdc exhibits high water and chemical stability as well as excellent fluorescence property. Due to the -COOH binding sites from H₂bdc, Zn3-ttb-bdc shows high sensitivity and a rapid luminescent response to a representative organic micropollutant trinitrophenol (TNP) and inorganic pollutants (Fe³⁺ and Cr₂O₇^2-) in wastewater. The mechanisms of multifunctional detection abilities of Zn3-ttb-bdc toward different types of pollutants are further studied. This work presents the structural design in preparing MOF materials for multifunctional detection performance, thus opening new perspectives for emerging MOF-based sensors as environmental monitors.

Inexpensive Organic Materials and Their Applications towards Heavy Metal Attenuation in Waters from Southern Peru

There is interest in using locally available, low cost organic materials to attenuate heavy metals such as Cd, Cr, Cu, Hg, Ni, Pb, and Zn found in surface waters in Peru and other developing regions. Here we mesh Spanish language publications, archived theses, and prior globally available literature to provide a tabulated synthesis of organic materials that hold promise for this application in the developing world. In total, nearly 200 materials were grouped into source categories such as algae and seashells, bacteria and fungi, terrestrial plant-derived materials, and other agricultural and processing materials. This curation was complemented by an assessment of removal potential that can serve as a resource for future studies. We also identified a subset of Peruvian materials that hold particular promise for further investigation, including seashell-based mixed media, fungal blends, lignocellulose-based substrates including sawdust, corn and rice husks, and food residuals including peels from potatoes and avocadoes. Many studies reported percent removal and/or lacked consistent protocols for solid to liquid ratios and defined aqueous concentrations, which limits direct application. However, they hold value as an initial screening methodology informed by local knowledge and insights that could enable adoption for agriculture and other non-potable water reuse applications. While underlying removal mechanisms were presumed to rely on sorptive processes, this should be confirmed in promising materials with subsequent experimentation to quantify active sites and capacities by generating sorption isotherms with a focus on environmental conditions and specific contaminated water properties (pH, temperature, ionic strength, etc.). These organics also hold promise for the pairing of sorption to indirect microbial respiratory processes such as biogenic sulfide complexation. Conversely, there is a need to quantify unwanted contaminant release that could include soluble organic matter and nutrients. In addition to local availability and treatment efficacy, social, technical, economic, and environmental applicability of those materials for large-scale application must be considered to further refine material selection.

Multi-approach analysis to assess the chromium(III) immobilization by Ochrobactrum anthropi DE2010

Ochrobactrum anthropi DE2010 is a microorganism isolated from Ebro Delta microbial mats and able to resist high doses of chromium(III) due to its capacity to tolerate, absorb and accumulate this metal. The effect of this pollutant on O. anthropi DE2010 has been studied assessing changes in viability and biomass, sorption yields and removal efficiencies. Furthermore, and for the first time, its capacity for immobilizing Cr(III) from culture media was tested by a combination of High Angle Annular Dark Field (HAADF) Scanning Transmission Electron Microscopy (STEM) imaging coupled to Energy Dispersive X-ray spectroscopy (EDX). The results showed that O. anthropi DE2010 was grown optimally at 0-2 mM Cr(III). On the other hand, from 2 to 10 mM Cr(III) microbial plate counts, growth rates, cell viability, and biomass decreased while extracellular polymeric substances (EPS) production increases. Furthermore, this bacterium had a great ability to remove Cr(III) at 10 mM (q = 950.00 mg g^-1) immobilizing it mostly in bright polyphosphate inclusions and secondarily on the cellular surface at the EPS level. Based on these results, O. anthropi DE2010 could be considered as a potential agent for bioremediation in Cr(III) contaminated environments.

Expression of Rice Metallothionein Isoforms in Escherichia coli Enhances the Accumulation of Trivalent and Hexavalent Chromium

INTRODUCTION

Metallothioneins (MTs) are members of a family of low molecular weight and cysteine-rich proteins that are involved in heavy metal homeostasis and detoxification in living organisms. Plants have multiple MT types that are generally divided into four subgroups according to the arrangement of Cys residues.

METHODS

In the present study the E. coli cells which heterologously express four different rice MT (OsMT) isoforms were analyzed for the accumulation of two forms of chromium, Cr3+ and Cr6+.

RESULTS

The results show that the transgenic bacteria were more tolerant than control cells when they were grown up in the medium comprising Cr(NO3)3.9H2O or Na2CrO4. The cells expressing OsMT1, OsMT2, OsMT3 and OsMT4 give rise to 6.5-, 2.7-, 5.5- and 2.1-fold improvements on the accumulation capacity for Cr3+ and 9-, 3-, 5- and 3- fold Cr6+ respectively compared with comparison to the control strain. Furthermore, the purified recombinant GST-OsMTs were tested for their binding ability to Cr+3 and Cr+6 in vitro.

DISCUSSION

The data show that the recombinant GST-OsMT1 and GST-OsMT2 were able to bind both Cr3+ and Cr6+, in vitro. However, their binding strength was low with respect to previous tested divalent ions like Cd2+.

Necrotrophic fungus Macrophomina phaseolina tolerates chromium stress through regulating antioxidant enzymes and genes expression (MSN1 and MT)

Cr(VI) tolerance level of phytopathogenic fungus viz., Macrophomina phaseolina (Tassi) Goid was assessed through growth, morphological, physiological, and metal accumulation assays. Initially, the fungus growth assays indicated that the fungus can grow over concentration range of 20-3000 ppm and exhibited high tolerance index (0.88-1.00) and minimum inhibitory concentration at 3500 ppm of Cr. Observations under compound and scanning electron microscope un-revealed the structural features of hyphae under Cr stress as thick-walled, aggregated, branched, short and broken, along with attachment of irregular objects on them. Metal accumulation analysis revealed reduction in Cr(VI) accumulation by the fungus with increase in metal concentration in the growth medium (500-3000 ppm). Cr stress induced upregulation of antioxidant enzyme activities (catalase, peroxidase and polyphenol oxidase), expression of genes (MSN1 and metallothionein) and appearnace of new protein bands suggesting the possible role in protection and survival of M. phaseolina against Cr(VI)-induced oxidative stress. This study concludes that interference of Cr with growth and physiological process of M. phaseolina could affect its infection level on its host plant, therefore, synergistic action of two factors needs to be addressed, which may aid to guide future research efforts in understanding impact of plant-pathogen-heavy metal interaction.

Bioremediation strategies for chromium removal: Current research, scale-up approach and future perspectives

Industrial applications and commercial processes release a lot of chromium into the environment (soil, surface water or atmosphere) and resulting in serious human diseases because of their toxicity. Biological Cr-removal offers an alternative to traditional physic-chemical methods. This is considered as a sustainable technology of lower impact on the environment. Resistant microorganisms (e.g. bacteria, fungi, and algae) have been most extensively studied from this characteristic. Several mechanisms were developed by microorganisms to deal with chromium toxicity. These tools include biotransformation (reduction or oxidation), bioaccumulation and/or biosorption, and are considered as an alternative to remove the heavy metal. The aim of this review is summarizes Cr(VI)-bioremediation technologies oriented on practical applications at larger scale technologies. In the same way, the most relevant results of several investigations focused on process feasibility and the robustness of different systems (reactors and pilot scale) designed for chromium-removal capacity are highlighted.

Luminescent Zn(II) Coordination Polymers for Highly Selective Sensing of Cr(III) and Cr(VI) in Water

Three photoluminescent zinc coordination polymers (CPs), {[Zn₂(tpeb)₂(2,5-tdc)(2,5-Htdc)₂]·2H₂O}_n (1), {[Zn₂(tpeb)₂(1,4-ndc)(1,4-Hndc)₂]·2.6H₂O}_n (2), and {[Zn₂(tpeb)₂(2,3-ndc)₂]·H₂O}_n (3) (tpeb = 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene, 2,5-tdc = 2,5-thiophenedicarboxylic acid, 1,4-ndc = 1,4-naphthalenedicarboxylic acid, and 2,3-ndc = 2,3-naphthalenedicarboxylic acid) were prepared from reactions of Zn(NO₃)₂·6H₂O with tpeb and 2,5-H₂tdc, 1,4-H₂ndc, or 2,3-H₂ndc under solvothermal conditions. Compound 1 has a two-dimensional (2D) grid-like network formed from bridging 1D [Zn(tpeb)]_n chains via 2,5-tdc dianions. 2 and 3 possess similar one-dimensional (1D) double-chain structures derived from bridging the [Zn(tpeb)]_n chains via pairs of 1,4-ndc or 2,3-ndc ligands. The solid-state, visible emission by 1-3 was quenched by Cr³⁺, CrO₄^2-, and Cr₂O₇^2- ions in water with detection limits by the most responsive complex 3 of 0.88 ppb for Cr³⁺ and 2.623 ppb for Cr₂O₇^2- (pH = 3) or 1.734 ppb for CrO₄^2- (pH = 12). These values are well below the permissible limits set by the USEPA and European Union and the lowest so far reported for any bi/trifunctional CPs sensors. The mechanism of Cr³⁺ luminescence quenching involves irreversible coordination to free pyridyl sites in the CP framework, while the Cr⁶⁺ quenching involves reversible overlap of the absorption bands of the analytes with those of the excitation and/or emission bands for 3.

Mechanisms of hexavalent chromium resistance and removal by microorganisms

Chromium has been and is extensively used worldwide in multiple industrial processes and is routinely discharged to the environment from such processes. Therefore, this heavy metal is a potential threat to the environment and to public health, primarily because it is non-biodegradable and environmentally persistent. Chromium exists in several oxidation states, the most stable of which are trivalent Cr(Ill) and hexavalent Cr(VI) species. Each species possesses its own individual chemical characteristics and produces its own biological effects. For example, Cr (Ill) is an essential oligoelement for humans, whereas Cr(VI) is carcinogenic and mutagenic. Several chemical methods are used to remove Cr(VI) from contaminated sites. Each of these methods has advantages and disadvantages. Currently, bioremediation is often the preferred method to deal with Cr contaminated sites, because it is eco-friendly, cost-effective and is a "natural" technology. Many yeast, bacterial and fungal species have been assessed for their suitability to reduce or remove Cr(VI) contamination. The mechanisms by which these microorganisms resist and reduce Cr(VI) are variable and are species dependent. There are several Cr-resistance mechanisms that are displayed by microorganisms. These include active efflux of Cr compounds, metabolic reduction of Cr(VI) to Cr (ill), and either intercellular or extracellular prec1p1tation. Microbial Cr (VI) removal typically involves three stages: binding of chromium to the cell surface, translocation of chromium into the cell, and reduction of Cr(VI) to Cr (ill). Cr(VI) reduction by microorganisms may proceed on the cell surface, outside the cell, or intracellularly, either directly via chromate reductase enzymes, or indirectly via metabolite reduction of Cr(VI). The uptake of chromium ions is a biphasic process. The primary step is known as biosorption, a metabolic energyindependent process. Thereafter, bioaccumulation occurs, but is much slower, and is dependent on cell metabolic activity. Choosing an appropriate bioremediation strategy for Cr is extremely important and must involve investigating and understanding the key mechanisms that are involved in microbial resistance to and removal of Cr(VI).

Speciation of chromium in chromium yeast

High-performance liquid chromatography was used to separate Cr(III) and Cr(VI) in samples with detection by inductively coupled plasma mass spectrometry(ICP-MS). The separation was achieved on a weak anion exchange column. The mobile phase was pH 7.0 ammonium nitrate solution. The redox reaction between Cr(III) and Cr(VI) was avoided during separation and determination. This separation method could be used to separate the samples with large concentration differences between Cr(III) and Cr(VI). The alkaline digestion was used to extract chromium in solid sample, which had no effect on the retention time and the peak area of the Cr(VI). However, the conversion of Cr(VI) from Cr(III) was observed during alkaline digestion, which displayed positive relation with the ratio of Cr(III) and Cr(VI) in samples. Both Cr(III) and Cr(VI) contents of chromium yeasts cultured in media with different chromium additions were determined. The spike recoveries of Cr(VI) for chromium yeasts were in the range of 95-108 %.

Photosynthetic activity and protein overexpression found in Cr(III)-tolerant cells of the green algae Dictyosphaerium chlorelloides

Chromium is an important constituent in effluents obtained from chromium plating industries. Due to the highly toxic nature of Cr(VI), attention has been shifted to less hazardous Cr(III) electroplating processes. This study evaluated aquatic toxicity of Cr(III)-containing laboratory samples representative of effluents from chromium electroplating industries, on the photosynthetic activity exhibited by both Cr(III)-sensitive (Dc1M(wt)) and tolerant (Dc1M(Cr(III)R30)) Dictyosphaerium chlorelloides strains. Additionally, selected de novo-determined peptide sequences, obtained from Dc1M(Cr(III)R30), have been analyzed to evidence the possible Cr(III) toxic mechanism involved in the resistance of these cells to high Cr(III) levels in aquatic environments. Dc1M(Cr(III)R30) strain exhibited a gross photosynthetic balance of about five times lower than that exhibited by Dc1M(wt) strain, demonstrating that Dc1M(Cr(III)R30) has a photosynthetic yield significantly lower than Dc1M(wt). SDS-PAGE of Dc1M(Cr(III)R30) samples showed the presence of at least two protein bands (23.05 and 153.46 KDa, respectively) absent in wild-type strain samples. Although it has achieved a low coincidence between the lower molecular weight band and a GTPase identified from genome of the green alga Chlamydomonas reinhardtii, none of de novo peptide sequences obtained showed a significant MS-BLAST score, so that further studies will be required.

Single and combined effects of exposure concentration and duration on biological responses of Ceratophyllum demersum L. exposed to Cr species

This study aimed to demonstrate the ways in which two chromium species, Cr (III) and Cr (VI), can affect various physiological and biochemical parameters in the plant Ceratophyllum demersum L., and to evaluate the single and combined impact of exposure concentration and duration. C. demersum was exposed to Cr (III) and Cr (VI) at a variety of concentrations (1, 2, 5, and 10 mM) and for differing durations (1, 2, 4, and 7 days), after which Cr accumulation, relative growth rate (RGR), malondialdehyde (MDA) content, electrical conductivity (EC), photosynthetic pigmentation, proline content and antioxidant enzyme activities were examined. The single and combined effects of exposure duration and Cr concentration on each parameter were determined using a two-way analysis of variance. For both the Cr (III) and Cr (VI) applications, it was observed that concentration had a significant effect on all parameters assessed. However, duration had no statistically significant effect on proline content in the Cr (III) application, or on MDA and protein content in the Cr (VI) application. It was determined that concentration exerted greater effects than duration for both Cr species studied. In addition, the results indicated that duration and concentration had a synergistic effect on variations of RGR, EC, protein content, and antioxidant enzyme activities in both the Cr (III) and Cr (VI) applications. These results may be useful when planning further phytoremediation and plant biotechnology studies.

Bioadsorption and bioaccumulation of chromium trivalent in Cr(III)-tolerant microalgae: a mechanisms for chromium resistance

Anthropogenic activity constantly releases heavy metals into the environment. The heavy metal chromium has a wide industrial use and exists in two stable oxidation states: trivalent and hexavalent. While hexavalent chromium uptake in plant cells has been reported that an active process by carrying essential anions, the cation Cr(III) appears to be taken up inactively. Dictyosphaerium chlorelloides (Dc1M), an unicellular green alga is a well-studied cell biological model organism. The present study was carried out to investigate the toxic effect of chromium exposures on wild-type Cr(III)-sensitive (Dc1M(wt)) and Cr(III)-tolerant (Dc1M(Cr(III)R30)) strains of these green algae, and to determine the potential mechanism of chromium resistance. Using cell growth as endpoint to determine Cr(III)-sensitivity, the IC₅₀(₇₂) values obtained show significant differences of sensitivity between wild type and Cr(III)-tolerant cells. Scanning electron microscopy (SEM) showed significant morphological differences between both strains, such as decrease in cell size or reducing the coefficient of form; and transmission electron microscopy (TEM) revealed ultrastructural changes such as increased vacuolization and cell wall thickening in the Cr(III)-tolerant strain with respect to the wild-type strain. Energy dispersive X-ray analysis (SEM/XEDS) revealed that Cr(III)-tolerant D. chlorelloides cells are able to accumulate considerable amounts of chromium distributed in cell wall (bioadsorption) as well as in cytoplasm, vacuoles, and chloroplast (bio-accumulation). Morphological changes of Cr(III)-tolerant D. chlorelloides cells and the presence of these electron-dense bodies in their cell structures can be understood as a Cr(III) detoxification mechanism.

Phycoremediation of lead and cadmium by employing Nostoc muscorum as biosorbent and optimization of its biosorption potential

The present study reports the influence of different factors on the sorption of Pb and Cd by Nostoc muscorum. The results showed that extent of Pb and Cd removal by N. muscorum cells increased with increasing biosorbent dose, but exhibited decline in the adsorption capacity. The maximum sorption of Cd (85.2%) and Pb (93.3%) was achieved at 60 and 80 microg/ml concentrations of respective metal, within 30 and 15 min, respectively. The result revealed that optimum biosorption of Pb and Cd occurred at pH 5 and 6, respectively, at 40 degrees C temperature. Presence of binary metals (both Pb and Cd) in a solution showed that the presence of one metal ion resulted into decreased sorption of other metal ion. The presence of Ca and EDTA showed significant decrease in the sorption of Pb and Cd, while other anions and cations did not show significant effect on the biosorption of both the metals. Maximum desorption of Pb and Cd was achieved in the presence of EDTA and HNO3, respectively. Results also showed that the test biosorbent could be repeatedly used up to six biosorption/desorption cycles without significant loss of its initial metal adsorption capacity.

Removal efficiency of Cr6+ by indigenous Pichia sp. isolated from textile factory effluent

Resistance of the indigenous strains P. jadinii M9 and P. anomala M10, to high Cr⁶⁺ concentrations and their ability to reduce chromium in culture medium was studied. The isolates were able to tolerate chromium concentrations up to 104 μg mL⁻¹. Growth and reduction of Cr⁶⁺ were dependent on incubation temperature, agitation, Cr⁶⁺ concentration, and pH. Thus, in both studied strains the chromium removal was increased at 30°C with agitation. The optimum pH was different, with values of pH 3.0 and pH 7.0 in the case of P. anomala M10 and pH 7.0 using P. jadinii M9. Chromate reduction occurred both in intact cells (grown in culture medium) as well as in cell-free extracts. Chromate reductase activity could be related to cytosolic or membrane-associated proteins. The presence of a chromate reductase activity points out a possible role of an enzyme in Cr⁶⁺ reduction.

Cr (III) bioremoval capacities of indigenous and adapted bacterial strains from Palar river basin

The effluents from tanning industries in and around Palar river basin are the major cause of Cr (III) pollution. Forty-five chromium (III) tolerant bacterial strains were isolated from the Palar river basin. Bacillus subtilis VITSCCr01 showed tolerance up to 1500 mg/l and its Cr (III) bioremoval capacity was 64%. Increasing the concentration of Cr (III) increased exopolysaccharide (EPS) production by the bacteria. FT-IR spectral studies confirmed the presence of polysaccharides in the Cr (III) treated bacteria. Adaptation of Bacillus subtilis VITSCCr01 with higher Cr (III) concentration improved the bioremoval capacity to 85%. SEM-EDX showed that the adapted bacteria accumulated high concentration of chromium. Bacillus subtilis VITSCCr01 could be used as a tool for in situ removal of Cr (III) especially in the tannery polluted environment.

Chromium(VI) is more toxic than chromium(III) to freshwater algae: a paradigm to revise?

The behavior and toxicity of Cr(III) and Cr(VI) to the green algae Pseudokirchneriella subcapitata and Chlorella kessleri were studied in a standard culture medium (ISO medium) and, for P. subcapitata only, in ultrafiltered natural water enriched with all ISO components (modified ISO medium). In all solutions amended with Cr(III), initial chromium concentrations decreased by 60-90% over 72h (the duration of algal tests) indicating that protocols for testing poorly soluble substances are required to properly evaluate Cr(III) toxicity. After accounting for its behavior in test solutions, chromium(III) was 5-10 times more toxic than Cr(VI) in both media. For P. subcapitata, the average 72h EC50 of Cr(III) in ISO medium was 17.4+/-4.7 microg/L (n=9); lower than corresponding hardness-corrected Continuous Concentration Criteria of the US EPA and well within the range of Cr concentrations found in waters impacted by tannery discharges. These results follow from intrinsic chemical properties of Cr(III) in circumneutral solutions, so that the actual toxicity of Cr(III) to aquatic organisms may be generally underestimated.

Interference of chromium with biological systems in yeasts and fungi: a review

This paper deals with the interactions of chromium (Cr) with biological systems, focusing in particular on yeasts and fungi. These interactions are analysed with primarily regard to biochemical functions, but higher levels of organization are also considered. Thus, the morphological and cytological characteristics of selected microorganisms in response to exposure to chromium ions are evaluated. The different oxidation states of chromium and reactive oxygen species (ROS) generated in redox reactions with chromium ions are presented and characterized. The interactions of the most exposed subcellular structures, including the cell wall, plasma membrane and nuclei, have been deeply investigated in recent years, for two major reasons. The first is the toxicity of chromium ions and their strong impact on the metabolism of many species, ranging from microbes to humans. The second is the still disputed usefulness of chromium ions, and in particular trivalent chromium, in the glucose and fat metabolisms. Chromium pollution is still an important issue in many regions of the world, and various solutions have been proposed for the bioremediation of soil and water with selected microbial species. Yeasts and especially moulds have been most widely investigated from this aspect, and the biosorption and bioaccumulation of chromium for bioremediation purposes have been demonstrated. Accordingly, the mechanisms of chromium tolerance or resistance of selected microbes are of particular importance in both bioremediation and waste water treatment technologies. The mechanisms of chromium toxicity and detoxification have been studied extensively in yeasts and fungi, and some promising results have emerged in this area.

Evaluation of chromium(VI) removal behaviour by two isolates of Synechocystis sp. in terms of exopolysaccharide (EPS) production and monomer composition

Chromium(VI) removal and its association with exopolysaccharide (EPS) production in cyanobacteria were investigated. Synechocystis sp. BASO670 produced higher EPS (548 mg L(-1)) than Synechocystis sp. BASO672 (356 mg L(-1)). While the EC(50) of the Cr(VI) for Synechocystis sp. BASO670 and Synechocystis sp. BASO672 were determined as 11.5 mg L(-1), and 2.0 mg L(-1), respectively, there was no relation between Cr(VI) removal and EPS production. Synechocystis sp. BASO672, which has higher EPS value, removed (33%) more Cr(VI) than Synechocystis sp. BASO670. Monomer compositions of EPS of each of the isolates were determined differently. Synechocystis sp. BASO672 which removed higher Cr(VI), had higher values of uronic acid and glucuronic acid (192 microg/mg and 89%, respectively). Our results showed that EPS might play a role in Cr(VI) tolerance. Monomer composition, especially uronic acid and glucuronic acid content of EPS may have enhanced Cr(VI) removal.

Responses of Candida fukuyamaensis RCL-3 and Rhodotorula mucilaginosa RCL-11 to copper stress

The effect of high Cu(II) concentrations on superoxide dismutase (SOD) and catalase (CAT) activity in Candida fukuyamaensis RCL-3 and Rhodotorula mucilaginosa RCL-11, previously isolated from a copper filter at a mine plant in Argentina, was studied. Addition of 0.1, 0.2 and 0.5 mM Cu(II) to the culture medium increased total SOD and CAT activity in both strains. Native polyacrylamide gel electrophoresis revealed two bands with SOD activity for C. fukuyamaensis RCL-3 and only one for R. mucilaginosa RCL-11; the three bands corresponded to MnSOD.Intracellular accumulation of copper and morphological changes was observed using electron microscopy. Dark bodies examined with transmission electron microscopy (TEM) after 48 h of incubation probably corresponded to copper deposits. The number of dark bodies in R. mucilaginosa RCL-11 grew with increasing incubation time, whereas in C. fukuyamaensis RCL-3 the amount decreased. Scanning electron micrographs (SEM) of C. fukuyamaensis RCL-3 did not reveal any differences compared with the control, but R. mucilaginosa RCL-11 cells were bigger than control ones. TEM confirmed absence of compartmentalization mechanisms in Cu(II) detoxification since electron-dense bodies were mainly found in the cytoplasm.

Bioaccumulation versus adsorption of reactive dye by immobilized growing Aspergillus fumigatus beads

The removal of reactive brilliant blue KN-R using growing Aspergillus fumigatus (abbr. A. fumigatus) immobilized on carboxymethylcellulose (CMC) beads with respect to initial dye concentration was investigated. Bioaccumulation was the dominant mechanism of the dye removal. According to the UV-vis spectra and the results of three sets of experiments, it could be concluded that the bioaccumulation using immobilized growing A. fumigatus beads was achieved by metabolism-dependent accumulation and metabolism-independent adsorption (15-23% proportion of overall dye removal), which included biosorption by mycelia entrapped in them and adsorption on immobilization matrix. The transmission electron microscope (TEM) images showed the intracellular structures of mycelia and the toxicity of dye. It was found that the fungus had a considerable tolerance to reactive brilliant blue KN-R at initial dye concentrations of <114.7 mg/l. Though at high initial dye concentrations the growth of mycelia was inhibited significantly by the dye molecules in the growth medium, the bioaccumulation capacity was not markedly affected and the maximum bioaccumulation capacity was 190.5+/-2.0 mg/g at an initial dye concentration of 374.4 mg/l. The bioaccumulation rates were not constant over the contact time.

Sorption and desorption studies of chromium(VI) from nonviable cyanobacterium Nostoc muscorum biomass

This communication presents results pertaining to the sorptive and desorptive studies carried out on chromium(VI) removal onto nonviable freshwater cyanobacterium (Nostoc muscorum) biomass. Influence of varying the conditions for removal of chromium(VI), such as the pH of aqueous solution, the dosage of biosorbent, the contact time with the biosorbent, the temperature for the removal of chromium, the effect of light metal ions and the adsorption-desorption studies were investigated. Sorption interaction of chromium on to cyanobacterial species obeyed both the first and the second-order rate equation and the experimental data showed good fit with both the Langmuir and freundlich adsorption isotherm models. The maximum adsorption capacity was 22.92 mg/g at 25 degrees C and pH 3.0. The adsorption process was endothermic and the values of thermodynamic parameters of the process were calculated. Various properties of the cyanobacterium, as adsorbent, explored in the characterization part were chemical composition of the adsorbent, surface area calculation by BET method and surface functionality by FTIR. Sorption-desorption of chromium into inorganic solutions and distilled water were observed and this indicated the biosorbent could be regenerated using 0.1 M HNO3 and EDTA with upto 80% recovery. The biosorbents were reused in five biosorption-desorption cycles without a significant loss in biosorption capacity. Thus, this study demonstrated that the cyanobacterial biomass N. muscorum could be used as an efficient biosorbent for the treatment of chromium(VI) bearing wastewater.

Biosorption of Cr(VI) by immobilized biomass of two indigenous strains of cyanobacteria isolated from metal contaminated soil

Biosorption of Cr(VI) using native strains of cyanobacteria from metal contaminated soil in the premises of textile mill has been reported in this paper. Biosorption was studied as a function of pH (1-5), contact time (5-180 min) and initial chromium ion concentration (5-20mg/l) to find out the maximum biosorption capacity of alginate immobilized Nostoc calcicola HH-12 and Chroococcus sp. HH-11. The optimum conditions for Cr(VI) biosorption are almost same for the two strains (pH 3-4, contact time 30 min and initial chromium concentration of 20mg/l) however, the biomass of Chroococcus sp. HH-11 was found to be more suitable for the development of an efficient biosorbent for the removal of Cr(VI) from wastewater, as it showed higher values of q(m) and K(f), the Langmuir and Freundlich isotherm parameters. Both the isotherm models were suitable for describing the biosorption of Cr(VI) by the cyanobacterial biosorbents.