Some hydrogels having novel molecular structures

Rapid and selective actuation of 3D-printed shape-memory composites via microwave heating

Three-dimensional (3D) printing allows the fabrication of complex shapes with high resolutions. However, the printed structures typically have fixed shapes and functions. Four-dimensional printing allows the shapes of 3D-printed structures to be transformed in response to external stimuli. Among the external stimuli, light has unique advantages for remote thermal actuation. However, light absorption in opaque structures occurs only near the sample surface; thus, actuation can be slow. Here, we propose and experimentally demonstrate the rapid and selective actuation of 3D-printed shape-memory polymer (SMP) composites using microwave heating. The SMP composite filaments are prepared using different amounts of graphite flakes. Microwave radiation can penetrate the entire printed structures and induce rapid heating. With sufficient graphite contents, the printed SMP composites are heated above their glass transition temperature within a few seconds. This leads to rapid thermal actuation of the 3D-printed SMP structures. Finally, dual-material 3D printing is demonstrated to induce selective microwave heating and control actuation motion. Our experiments and simulations indicate that microwave heating of SMP composites can be an effective method for the rapid and selective actuation of complex structures.

Double network structure via ionic bond and covalent bond of carboxymethyl chitosan and poly(ethylene glycol): Factors affecting hydrogel formation

The factors were studied that affect the formation of DN hydrogel, which was prepared using a water-based, environmental-friendly system. The DN hydrogel was designed and prepared based on a cross-linked, polysaccharide-based, polymer carboxymethyl chitosan (CMCS) via an ionic crosslinking reaction for the first network structure. UV irradiation created a radical crosslinking reaction of poly(ethylene glycol) from a double bond at the chain end for the second network structure. It was found that the optimum hydrogel was produced using 9.5 %v/v of 1000PEGGMA, CMCS 5%w/v, and CaCl₂ 3%w/v. The results showed the highest percentage of the gel fraction was 87.84 % and the hydrogel was stable based on its rheological properties. Factors affecting the hydrogel formation were the concentration and molecular weight of PEGGMA and the concentrations of CMCS and calcium chloride (CaCl₂). The DN hydrogel had bioactivity due to its octacalcium phosphate (OCP) hydroxyapatite crystal form. In addition, the composite DN scaffold with a conductive polymer of chitosan-grafted-polyaniline (CS-g-PANI) had conduction of 2.33 × 10^-5 S/cm when the concentration of CS-g-PANI was 3 mg/ml, confirming the semi-conductive nature of the material. All the results indicated that DN hydrogel could be a candidate to apply in tissue-engineering applications.

Microphase behaviors and shear moduli of double-network gels: The effect of crosslinking constraints and chain uncrossability

By performing coarse-grained molecular dynamics simulations, we study the effect of crosslinking and chain uncrossability on the microphase behaviors and mechanical properties of the double-network gels. The double-network systems can be viewed as two separate networks interpenetrating each other uniformly, and the crosslinks in each network are generated, forming a regular cubic lattice. The chain uncrossability is confirmed by appropriately choosing the bonded and nonbonded interaction potentials. Our simulations reveal a close relation between the phase and mechanical properties of the double-network systems and their network topological structures. Depending on the lattice size and the solvent affinity, we have observed two different microphases: one is the aggregation of solvophobic beads around the crosslinking points, which leads to locally polymer-rich domains, and the other is the bunching of polymer strands, which thickens the network edges and thus changes the network periodicity. The former is a representation of the interfacial effect, while the latter is determined by the chain uncrossability. The coalescence of network edges is demonstrated to be responsible for the large relative increase in the shear modulus. Compressing and stretching induced phase transitions are observed in the current double-network systems, and the sharp discontinuous change in the stress that appears at the transition point is found to be related to the bunching or debunching of the network edges. The results suggest that the regulation of network edges has a strong influence on the network mechanical properties.

A freeze-thawing method applied to the fabrication of 3-d curdlan/polyvinyl alcohol hydrogels as scaffolds for cell culture

In this work, an innovative composite hydrogel composed of curdlan (CD)/polyvinyl alcohol (PVA) hydrogels with a 3-d network structure was successfully prepared by freeze-thaw processing. The presence of interactions, changes in crystallinity, and thermal behaviour were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetry (TGA and DTG), respectively. The morphology of the hydrogels was investigated by scanning electron microscopy (SEM). With the increase of PVA concentration, the composite hydrogel had a greater mechanical strength while remaining remarkably ductile as evinced by tensile test results. PVA content affects the swelling and water retention of CD/PVA hydrogels. The results of CCK-8 assay showed that CD/PVA hydrogels have no cytotoxic effect on the mouse fibroblast L929 cells. The AO/EB double-staining experiment further proved that the cells in the composite hydrogels had good cytocompatibility. The porous biohydrogels developed in the present work can provide an ideal cell growth environment as a scaffold. CD/PVA hydrogels highlight the value of this system for cell adhesion and proliferation, and further soft tissue engineering application.

Catechol-functionalized hydrogels: biomimetic design, adhesion mechanism, and biomedical applications

Hydrogels are a unique class of polymeric materials that possess an interconnected porous network across various length scales from nano- to macroscopic dimensions and exhibit remarkable structure-derived properties, including high surface area, an accommodating matrix, inherent flexibility, controllable mechanical strength, and excellent biocompatibility. Strong and robust adhesion between hydrogels and substrates is highly desirable for their integration into and subsequent performance in biomedical devices and systems. However, the adhesive behavior of hydrogels is severely weakened by the large amount of water that interacts with the adhesive groups reducing the interfacial interactions. The challenges of developing tough hydrogel-solid interfaces and robust bonding in wet conditions are analogous to the adhesion problems solved by marine organisms. Inspired by mussel adhesion, a variety of catechol-functionalized adhesive hydrogels have been developed, opening a door for the design of multi-functional platforms. This review is structured to give a comprehensive overview of adhesive hydrogels starting with the fundamental challenges of underwater adhesion, followed by synthetic approaches and fabrication techniques, as well as characterization methods, and finally their practical applications in tissue repair and regeneration, antifouling and antimicrobial applications, drug delivery, and cell encapsulation and delivery. Insights on these topics will provide rational guidelines for using nature's blueprints to develop hydrogel materials with advanced functionalities and uncompromised adhesive properties.

Plastic-like Hydrogels with Reversible Conversion of Elasticity and Plasticity and Tunable Mechanical Properties

The development of hydrogels with excellent mechanical properties is highly desirable in both fundamental studies and practical applications. But it is difficult to construct hydrogels that are both tough and stiff at the same time as these properties often contradict each other. Here, we report a facile and efficient method for producing ultrastiff and tough poly(N-isopropylacrylamide) (PNIPAM)/clay plastic-like hydrogels (PHs) by immersing PNIPAM/clay hydrogel into NaCl aqueous solution. The optimized PH-2-6 presented superior strength, modulus, and toughness (4.1 ± 0.2 MPa, 41.6 ± 8 MPa, and 15.85 ± 0.8 MJ m^-3, respectively). The unique mechanical properties are attributed to the synergistic effect of the osmotic pressure and the strong affinity between Na⁺ ion and the PNIPAM chain, which lead to a high degree of PNIPAM chain entanglement and fixing. Note that the PHs were molded into any required shape under an applied force, and retained permanently their shapes even if the load was removed, thus displaying typical plasticity. However, the deformed PHs could return to their original size and softness of hydrogel when immersed in pure water, which is a kind of shape-memory effect. The reversible conversion of elasticity and plasticity and shape memory arise from a kind of dynamic physical across-linking of Na⁺ and PNIPAM molecular chains, which could exist in the salt aqueous and disintegrate in water reversibly. Moreover, the mechanical properties of hydrogel can be tuned by adjusting the salt concentration and immersion time. The facile strategy may provide further avenue in developing hydrogels with such versatile dynamic behaviors to expand their applications.

Hydrogels: soft matters in photomedicine

Photodynamic therapy (PDT), a shining beacon in the realm of photomedicine, is a non-invasive technique that utilizes dye-based photosensitizers (PSs) in conjunction with light and oxygen to produce reactive oxygen species to combat malignant tissues and infectious microorganisms. Yet, for PDT to become a common, routine therapy, it is still necessary to overcome limitations such as photosensitizer solubility, long-term side effects (e.g., photosensitivity) and to develop safe, biocompatible and target-specific formulations. Polymer based drug delivery platforms are an effective strategy for the delivery of PSs for PDT applications. Among them, hydrogels and 3D polymer scaffolds with the ability to swell in aqueous media have been deeply investigated. Particularly, hydrogel-based formulations present real potential to fulfill all requirements of an ideal PDT platform by overcoming the solubility issues, while improving the selectivity and targeting drawbacks of the PSs alone. In this perspective, we summarize the use of hydrogels as carrier systems of PSs to enhance the effectiveness of PDT against infections and cancer. Their potential in environmental and biomedical applications, such as tissue engineering photoremediation and photochemistry, is also discussed.

Photo-responsive polymers: synthesis and applications

Photo-responsive polymers are able to change their structure, conformation and properties upon light irradiation.

Double-networks based on pH-responsive, amphiphilic “core-first” star first polymer conetworks prepared by sequential RAFT polymerization

Double-networks based on amphiphilic polymer conetworks synthesized using RAFT polymerization were prepared, exhibiting pH-responsiveness, nanophase separation and enhanced mechanical properties.

High-Flexibility, High-Toughness Double-Cross-Linked Chitin Hydrogels by Sequential Chemical and Physical Cross-Linkings

High-flexibility, high-toughness double-cross-linked (DC) chitin hydrogels are prepared through a sequential chemical and physical cross-linkings strategy. The incorporation of chemically and physically cross-linked domains imbues the DC chitin hydrogels with relatively high stiffness, high toughness, and toughness recoverability.

A novel gel based on an ionic complex from a dendronized polymer and ciprofloxacin: Evaluation of its use for controlled topical drug release

The development and characterization of a novel, gel-type material based on a dendronized polymer (DP) loaded with ciprofloxacin (CIP), and the evaluation of its possible use for controlled drug release, are presented in this work. DP showed biocompatible and non-toxic behaviors in cultured cells, both of which are considered optimal properties for the design of a final material for biomedical applications. These results were encouraging for the use of the polymer loaded with CIP (as a drug model), under gel form, in the development of a new controlled-release system to be evaluated for topical administration. First, DP-CIP ionic complexes were obtained by an acid-base reaction using the high density of carboxylic acid groups of the DP and the amine groups of the CIP. The complexes obtained in the solid state were broadly characterized using FTIR spectroscopy, XRP diffraction, DSC-TG analysis and optical microscopy techniques. Gels based on the DP-CIP complexes were easily prepared and presented excellent mechanical behaviors. In addition, optimal properties for application on mucosal membranes and skin were achieved due to their high biocompatibility and acute skin non-irritation. Slow and sustained release of CIP toward simulated physiological fluids was observed in the assays (in vitro), attributed to ion exchange phenomenon and to the drug reservoir effect. An in vitro bacterial growth inhibition assay showed significant CIP activity, corresponding to 38 and 58% of that exhibited by a CIP hydrochloride solution at similar CIP concentrations, against Staphylococcus aureus and Pseudomonas aeruginosa, respectively. However, CIP delivery was appropriate, both in terms of magnitude and velocity to allow for a bactericidal effect. In conclusion, the final product showed promising behavior, which could be exploited for the treatment of topical and mucosal opportunistic infections in human or veterinary applications.

Hierarchical Layered Heterogeneous Graphene-poly(N-isopropylacrylamide)-clay Hydrogels with Superior Modulus, Strength, and Toughness

Biological composites are renowned for their elaborate heterogeneous architectures at multiple scales, which lead to a unique combination of modulus, strength, and toughness. Inspired by biological composites, mimicking the heterogeneous structural design principles of biological composites is a powerful strategy to construct high-performance structural composites. Here, we creatively transfer some heterogeneous principles of biological composites to the structural design of nanocomposite hydrogels. Unique heterogeneous conductive graphene-PNIPAM-clay hydrogels are prepared through a combination of inhomogeneous water removal processes, in situ free-radical polymerization, and chemical reduction of graphene oxide. The nanocomposite hydrogels exhibit hierarchical layered heterogeneous architectures with alternate stacking of dense laminated layers and loose porous layers. Under tensile load, the stiff dense laminated layers serve as sacrificial layers that fracture at a relatively low strain, while the stretchable loose porous layers serve as energy dissipation layers by large extension afterward. Such local inhomogeneous deformation of the two heterogeneous layers enables the nanocomposite hydrogels to integrate superior modulus, strength, and toughness (9.69 MPa, 0.97 MPa, and 5.60 MJ/m(3), respectively). The study might provide meaningful enlightenments for rational structural design of future high-performance nanocomposite hydrogels.

Fundamentals of double network hydrogels

Double network (DN) hydrogels as promising soft-and-tough materials intrinsically possess extraordinary mechanical strength and toughness due to their unique contrasting network structures, strong interpenetrating network entanglement, and efficient energy dissipation.

Fast contact of solid-liquid interface created high strength multi-layered cellulose hydrogels with controllable size

Novel onion-like and multi-layered tubular cellulose hydrogels were constructed, for the first time, from the cellulose solution in a 7% NaOH/12% urea aqueous solvent by changing the shape of the gel cores. In our findings, the contacting of the cellulose solution with the surface of the agarose gel rod or sphere loaded with acetic acid led to the close chain packing to form immediately a gel layer, as a result of the destruction of the cellulose inclusion complex by acid through inducing the cellulose self-aggregation. Subsequently, multi-layered cellulose hydrogels were fabricated via a multi-step interrupted gelation process. The size, layer thickness and inter-layer space of the multi-layered hydrogels could be controlled by adjusting the cellulose concentrations, the gel core diameter and the contacting time of the solid-liquid interface. The multi-layered cellulose hydrogels displayed good architectural stability and solvent resistance. Moreover, the hydrogels exhibited high compressive strength and excellent biocompatibility. L929 cells could adhere and proliferate on the surface of the layers and in interior space, showing great potential as tissue engineering scaffolds and cell culture carrier. This work opens up a new avenue for the construction of the high strength multi-layered cellulose hydrogels formed from inner to outside via a fast contact of solid-liquid interface.

Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks

As swollen polymer networks in water, hydrogels are usually brittle. However, hydrogels with high toughness play critical roles in many plant and animal tissues as well as in diverse engineering applications. Here we review the intrinsic mechanisms of a wide variety of tough hydrogels developed over the past few decades. We show that tough hydrogels generally possess mechanisms to dissipate substantial mechanical energy but still maintain high elasticity under deformation. The integrations and interactions of different mechanisms for dissipating energy and maintaining elasticity are essential to the design of tough hydrogels. A matrix that combines various mechanisms is constructed for the first time to guide the design of next-generation tough hydrogels. We further highlight that a particularly promising strategy for the design is to implement multiple mechanisms across multiple length scales into nano-, micro-, meso-, and macro-structures of hydrogels.

A Facile Approach to Fabrication of Novel Magnetic Hydrogels Crosslinked by Multi-Functional Pomegranate-Like Nanospheres

A facile approach was explored to fabricate a novel magnetic hydrogel using pomegranate-like functional magnetic nanospheres (FMNs) as photoactive crosslinker and polyacrylamide as polymer matrix by photoinitiated free radical polymerization. These novel pomegranate-like FMNs were prepared by embedding Fe3O4 nanoparticles into polystyrene by miniemulsion polymerization. The effect of FMN concentration, acrylamide monomer molar concentration, polymerization time on the magnetic properties, morphology, swelling behaviour, and dynamic mechanical properties of magnetic hydrogels were systematically investigated. Our synthetic route expands the application of these materials in the fields of smart magnetic switches, targeted drug release, biomimetic sensors, and chemical devices.