Recent progress in polymer/two-dimensional nanosheets composites with novel performances

Multilayered organosiloxane films with self-healing ability converted from block copolymer nanocomposites

Self-healable, multilayered organosiloxane films were prepared via thermal conversion of lamellar organosiloxane films containing poly(ethylene oxide)-polydimethylsiloxane-poly(ethylene oxide) block copolymers. The incorporation of silanolate groups enabled crack healing through dynamic siloxane equilibration. The enhanced hardness and suppressed cyclic siloxane formation resulting from the multilayered structure exhibit potential for practical applications.

Wearable Biodevices Based on Two-Dimensional Materials: From Flexible Sensors to Smart Integrated Systems

The proliferation of wearable biodevices has boosted the development of soft, innovative, and multifunctional materials for human health monitoring. The integration of wearable sensors with intelligent systems is an overwhelming tendency, providing powerful tools for remote health monitoring and personal health management. Among many candidates, two-dimensional (2D) materials stand out due to several exotic mechanical, electrical, optical, and chemical properties that can be efficiently integrated into atomic-thin films. While previous reviews on 2D materials for biodevices primarily focus on conventional configurations and materials like graphene, the rapid development of new 2D materials with exotic properties has opened up novel applications, particularly in smart interaction and integrated functionalities. This review aims to consolidate recent progress, highlight the unique advantages of 2D materials, and guide future research by discussing existing challenges and opportunities in applying 2D materials for smart wearable biodevices. We begin with an in-depth analysis of the advantages, sensing mechanisms, and potential applications of 2D materials in wearable biodevice fabrication. Following this, we systematically discuss state-of-the-art biodevices based on 2D materials for monitoring various physiological signals within the human body. Special attention is given to showcasing the integration of multi-functionality in 2D smart devices, mainly including self-power supply, integrated diagnosis/treatment, and human-machine interaction. Finally, the review concludes with a concise summary of existing challenges and prospective solutions concerning the utilization of 2D materials for advanced biodevices.

Enhanced Dielectric Performance in PVDF-Based Composites by Introducing a Transition Interface

Polymeric dielectrics have garnered significant interest worldwide due to their excellent comprehensive performance. However, developing polymeric dielectric films with high permittivity (εr) and breakdown strength (Eb) and low dielectric loss (tanδ) presents a huge challenge. In this study, amorphous aluminum oxide (Al2O3, AO) transition interfaces with nanoscale thickness were constructed between titanium oxide (TiO2, TO) nanosheets and polyvinylidene fluoride (PVDF) to manufacture composites (PVDF/TO@AO). TO@AO nanosheets showed favorable dispersion in the polymer-based composites. Improved permittivity, suppressed dielectric loss, and enhanced breakdown strength were achieved by introducing AO coating with intermediate permittivity onto TO nanosheets to build a transition interface. The transition interface efficiently depressed the mobility of the charge carrier and electric conduction of the PVDF/TO@AO composites. As a result, the PVDF-based composite with 1 wt% TO@AO showed superior comprehensive performance, including high εr of ~12.7, low tanδ of ~0.017, and exceptional Eb of ~357 kV/mm. This strategy supplies a novel paradigm for the application of fabricating dielectric films with excellent comprehensive performance.

Dual Nanofillers Reinforced Polymer-Inorganic Nanocomposite Film with Enhanced Mechanical Properties

Simultaneously improving the strength and toughness of polymer-inorganic nanocomposites is highly desirable but remains technically challenging. Herein, a simple yet effective pathway to prepare polymer-inorganic nanocomposite films that exhibit excellent mechanical properties due to their unique composition and structure is demonstrated. Specifically, a series of poly(methacrylic acid)x-block-poly(benzyl methacrylate)y diblock copolymer nano-objects with differing dimensions and morphologies is prepared by polymerization-induced self-assembly (PISA) mediated by reversible addition-fragmentation chain transfer polymerization (RAFT). Such copolymer nano-objects and ultrasmall calcium phosphate oligomers (CPOs) are used as dual fillers for the preparation of polymer-inorganic composite films using sodium carboxymethyl cellulose (CMC) as a matrix. Impressively, the strength and toughness of such composite films are substantially reinforced as high as up to 202.5 ± 14.8 MPa and 62.3 ± 7.9 MJ m-3, respectively. Owing to the intimate interaction between the polymer-inorganic interphases at multiple scales, their mechanical performances are superior to most conventional polymer films and other nanocomposite films. This study demonstrates the combination of polymeric fillers and inorganic fillers to reinforce the mechanical properties of the resultant composite films, providing new insights into the design rules for the construction of novel hybrid films with excellent mechanical performances.

Chemistry of Reduced Graphene Oxide: Implications for the Electrophysical Properties of Segregated Graphene-Polymer Composites

Conductive polymer composites (CPCs) with nanocarbon fillers are at the high end of modern materials science, advancing current electronic applications. Herein, we establish the interplay between the chemistry and electrophysical properties of reduced graphene oxide (rGO), separately and as a filler for CPCs with the segregated structure conferred by the chemical composition of the initial graphene oxide (GO). A set of experimental methods, namely X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy, van der Paw and temperature-dependent sheet resistance measurements, along with dielectric spectroscopy, are employed to thoroughly examine the derived materials. The alterations in the composition of oxygen groups along with their beneficial effect on nitrogen doping upon GO reduction by hydrazine are tracked with the help of XPS. The slight defectiveness of the graphene network is found to boost the conductivity of the material due to facilitating the impact of the nitrogen lone-pair electrons in charge transport. In turn, a sharp drop in material conductivity is indicated upon further disruption of the π-conjugated network, predominantly governing the charge transport. Particularly, the transition from the Mott variable hopping transport mechanism to the Efros-Shklovsky one is signified. Finally, the impact of rGO chemistry and physics on the electrophysical properties of CPCs with the segregated structure is evaluated. Taken together, our results give a hint at how GO chemistry manifests the properties of rGO and the CPC derived from it, offering compelling opportunities for their practical applications.

Protruding Boron Nitride Nanotubes on the Al2O3 Surface Enabled by Tannic Acid-Assisted Modification to Fabricate a Thermal Conductive Epoxy/Al2O3 Composite

Over the past few years, the ability to efficiently increase boron nitride nanotube (BNNT) production has opened up ample research possibilities. BNNT has garnered significant attention for diversifying its industrial applications. However, the problem of poor processability resulting from agglomeration and uneven distribution has emerged as a major challenge to integrating BNNT into the polymer matrix for composite material formation. Utilizing noncovalently attached molecules with various reactive sites can be a logical method to enhance the compatibility of BNNT with different polymers. The present study explored a simple approach to protruding BNNT onto the surface of Al2O3 through tannic acid (TA)-assisted generation of alkyl chains (octadecylamine, ODA) to fabricate Al2O3@ODA-BNNT. The subsequent compounding of Al2O3@ODA-BNNT with epoxy polymer generates interconnected thermal conduction pathways, thereby improving the thermal conduction and mechanical performance of the composites. The current research approach allows for the even distribution of BNNT throughout the polymer matrix, as demonstrated by optical characterization, mechanical performance analysis, and isotropic thermal conductivity analysis. The fabricated epoxy composite by incorporating a 2 wt % (BNNT = 1.3 wt % and ODA = 0.7 wt %) ODA-BNNT exhibited 5.117 W/mK thermal conductivity and 7.43 MPa mechanical stress. Thermal conductivity improved by 2528, 76.56, and 54.7%, while mechanical stress enhanced by 270, 221, and 34% compared to neat polymers without BNNT and virgin BNNT epoxy composites, respectively.

Thermally Conductive Polydimethylsiloxane-Based Composite with a Three-Dimensional Vertically Aligned Thermal Network Incorporating Hexagonal Boron Nitride Nanosheets and Nanodiamonds

Thermal interface materials play a pivotal role in efficiently transferring heat from heating devices to thermal management components, thereby reducing the risk of component degradation due to overheating. In this study, we propose a strategy for enhancing the out-of-plane thermal conductivity (TC) of composite materials by fabricating a three-dimensional (3D) thermal network within a polydimethylsiloxane (PDMS) matrix. Specifically, the composite material was designed to incorporate a dense thermal network comprising hexagonal boron nitride nanosheets (BNNSs) and nanodiamonds (NDs). The fabrication process commenced with the preparation of BNNSs through liquid-phase exfoliation, followed by the creation of a 3D BNNSs-NDs/polyimide aerogel thermal framework using a unidirectional solidification ice templating method and subsequent heat treatment. Vacuum impregnation and curing were then employed to finalize the production of the 3D BNNSs-NDs/PDMS composite material. Characterization analyses indicated that the addition of NDs filled the voids between BNNSs, leading to the densification of the thermal framework pore walls and the establishment of additional thermal pathways. Impressively, with concentrations of BNNSs and NDs of 17.99 and 7.71 wt %, respectively, the out-of-plane TC of the 3D BNNSs-NDs/PDMS composite material reached 1.623 W m-1 K-1, marking notable enhancements of 754.21% and 256.70% compared to those of pure PDMS and composites prepared via direct blending with randomly distributed BNNSs and NDs, respectively. Furthermore, the 3D BNNSs-NDs thermal framework improved the compressive strength and the dimensional stability of the composite material. Finite element simulations additionally confirmed the synergistic improvement of the TC achieved through the combination of BNNSs and NDs, demonstrating that the 3D BNNSs-NDs/PDMS composite material displayed superior heat conduction and a greater density of thermal pathways compared to those of its counterparts, including 3D BNNSs/PDMS and 3D NDs/PDMS composite materials. In summary, this work presents a strategy for enhancing the out-of-plane TC of polymer-based composite materials by incorporating vertically aligned thermal networks.

Functional surfactant-directing ultrathin metallic nanoarchitectures as high-performance electrocatalysts

Ultrathin nanosheets possess a distinctive structure characterized by an abundance of active sites fully accessible on their surface. Concurrently, their nanoscale thickness confers an extraordinarily high specific surface area and promising electronic properties. To date, numerous strategies have been devised for synthesizing precious metal nanosheets that exhibit excellent electrocatalytic performance. In this paper, recent progress in the controlled synthesis of two-dimensional, ultrathin nanosheets by a self-assembly mechanism using functional surfactants is reviewed. The aim is to highlight the key role of functional surfactants in the assembly and synthesis of two-dimensional ultrathin nanosheets, as well as to discuss in depth how to enhance their electrochemical properties, thereby expanding their potential applications in catalysis. We provide a detailed exploration of the mechanisms employed by several long-carbon chain surfactants commonly used in the synthesis of nanosheets. These surfactants exhibit robust electrostatic and hydrophobic effects, effectively confining the crystalline growth of metals along lamellar micelles. Moreover, we present an overview of the electrocatalytic performance demonstrated by the ultrathin nanosheets synthesized through this innovative pathway. Furthermore, it offers valuable insights that may pave the way for further exploration of more functional long-chain surfactants, leading to the synthesis of ultrathin nanosheets with significantly enhanced electrocatalytic performance.

Flexible solid-liquid bi-continuous electrically and thermally conductive nanocomposite for electromagnetic interference shielding and heat dissipation

In the era of 5 G, the rise in power density in miniaturized, flexible electronic devices has created an urgent need for thin, flexible, polymer-based electrically and thermally conductive nanocomposites to address challenges related to electromagnetic interference (EMI) and heat accumulation. However, the difficulties in establishing enduring and continuous transfer pathways for electrons and phonons using solid-rigid conductive fillers within insulative polymer matrices limit the development of such nanocomposites. Herein, we incorporate MXene-bridging-liquid metal (MBLM) solid-liquid bi-continuous electrical-thermal conductive networks within aramid nanofiber/polyvinyl alcohol (AP) matrices, resulting in the AP/MBLM nanocomposite with ultra-high electrical conductivity (3984 S/cm) and distinguished thermal conductivity of 13.17 W m-1 K-1. This nanocomposite exhibits excellent EMI shielding efficiency (SE) of 74.6 dB at a minimal thickness of 22 μm, and maintains high EMI shielding stability after enduring various harsh conditions. Meanwhile, the AP/MBLM nanocomposite also demonstrates promising heat dissipation behavior. This work expands the concept of creating thin films with high electrical and thermal conductivity.

Recent Advances in Fire-Retardant Silicone Rubber Composites

Silicone rubber (SR), as one kind of highly valuable rubber material, has been widely used in many fields, e.g., construction, transportation, the electronics industry, automobiles, aviation, and biology, owing to its attractive properties, including high- and low-temperature resistance, weathering resistance, chemical stability, and electrical isolation, as well as transparency. Unfortunately, the inherent flammability of SR largely restricts its practical application in many fields that have high standard requirements for flame retardancy. Throughout the last decade, a series of flame-retardant strategies have been adopted which enhance the flame retardancy of SR and even enhance its other key properties, such as mechanical properties and thermal stability. This comprehensive review systematically reviewed the recent research advances in flame-retarded SR materials and summarized and introduced the up-to-date design of different types of flame retardants and their effects on flame-retardant properties and other performances of SR. In addition, the related flame-retardant mechanisms of the as-prepared flame-retardant SR materials are analyzed and presented. Moreover, key challenges associated with these various types of FRs are discussed, and future development directions are also proposed.

Properties of EPDM Nanocomposites Reinforced with Modified Montmorillonite

Considering the dilemma of obtaining economic and high-performance composites based on non-polar and main-chain-saturated ethylene propylene diene monomer rubber (EPDM), we proposed an effective and universal filler modification and nanocomposite preparation method. Specifically, the montmorillonite (MMT) surface was coated with polydopamine (PDA) to obtain DMMT, which was confirmed by XRD, XPS, FTIR, and TGA. After compounding DMMT gel with the solid EPDM via the gel compounding method, a silane coupling agent, vinyltrimethoxysilane, was introduced to construct covalent interactions between rubber and filler. Compared with the unmodified MMT filler EPDM, the EPDM/DMMT nanocomposite showed much fewer filler aggregates in the matrix. The highest tensile strength of the composites reached 6.5 MPa with 10 phr DMMT, almost 200% higher than that of pure EPDM.

Intrinsic Elastomer with Remarkable Dielectric Constant via Elastification of Relaxor Ferroelectric Polymer

High-dielectric-constant elastomers always play a critical role in the development of wearable electronics for actuation, energy storage, and sensing; therefore, there is an urgent need for effective strategies to enhance dielectric constants. The present methods mainly involve adding inorganic or conductive fillers to the polymer elastomers, however, the addition of fillers causes a series of problems, such as large dielectric loss, increased modulus, and deteriorating interface conditions. Here, the elastification of relaxor ferroelectric polymers is investigated through slight cross-linking, aiming to obtain intrinsic elastomers with high-dielectric constants. By cross-linking of the relaxor ferroelectric polymer poly(vinylidene fluoride-ter-trifluoroethylene-ter-chlorofluoroethylene) with a long soft chain cross-linker, a relaxor ferroelectric elastomer with an enhanced dielectric constant is obtained, twice that of the pristine relaxor ferroelectric polymer and surpassing all reported intrinsic elastomers. This elastomer maintains its high-dielectric constant over a wide temperature range and exhibits robust mechanical fatigue resistance, chemical stability, and thermal stability. Moreover, the ferroelectricity of the elastomer remains stable under strains up to 80%. This study offers a simple and effective way to enhance the dielectric constant of intrinsic elastomers, thus facilitating advancements in soft robots, biosensors, and wearable electronics.

Flexible Sensors Based on Conductive Polymer Composites

Elastic polymer-based conductive composites (EPCCs) are of great potential in the field of flexible sensors due to the advantages of designable functionality and thermal and chemical stability. As one of the popular choices for sensor electrodes and sensitive materials, considerable progress in EPCCs used in sensors has been made in recent years. In this review, we introduce the types and the conductive mechanisms of EPCCs. Furthermore, the recent advances in the application of EPCCs to sensors are also summarized. This review will provide guidance for the design and optimization of EPCCs and offer more possibilities for the development and application of flexible sensors.

Atomic-Level Matching Metal-Ion Organic Hybrid Interface to Enhance Energy Storage of Polymer-Based Composite Dielectrics

In this work, a distinctive "metal-ion organic hybrid interface" (MOHI) between polyimide (PI) and calcium niobate (CNO) nanosheets is designed. The metal ions in the MOHI can achieve atomic-level matching not only with the inorganic CNO, but also with the PI chains, forming uniform and strong chemical bonds. These results are demonstrated by experiment and theory calculations. Significantly, the MOHI reduces the free volume and introduces deep traps across the filler-matrix interfacial area, thus suppressing the electric field distortion in PI-based composite dielectrics. Consequently, PI-based dielectric containing the MOHI exhibits excellent energy storage performance. The energy storage densities (Ue) of the composite dielectric reach 9.42 J cm-3 and 4.75 J cm-3 with energy storage efficiency (η) of 90% at 25 °C and 150 °C respectively, which are 2.6 and 11.6 times higher than those of pure PI. This study provides new ideas for polymer-based composite dielectrics in high energy storage.

Chemical and Physical Architecture of Macromolecular Gels for Fracturing Fluid Applications in the Oil and Gas Industry; Current Status, Challenges, and Prospects

Hydraulic fracturing is vital in recovering hydrocarbons from oil and gas reservoirs. It involves injecting a fluid under high pressure into reservoir rock. A significant part of fracturing fluids is the addition of polymers that become gels or gel-like under reservoir conditions. Polymers are employed as viscosifiers and friction reducers to provide proppants in fracturing fluids as a transport medium. There are numerous systems for fracturing fluids based on macromolecules. The employment of natural and man-made linear polymers, and also, to a lesser extent, synthetic hyperbranched polymers, as additives in fracturing fluids in the past one to two decades has shown great promise in enhancing the stability of fracturing fluids under various challenging reservoir conditions. Modern innovations demonstrate the importance of developing chemical structures and properties to improve performance. Key challenges include maintaining viscosity under reservoir conditions and achieving suitable shear-thinning behavior. The physical architecture of macromolecules and novel crosslinking processes are essential in addressing these issues. The effect of macromolecule interactions on reservoir conditions is very critical in regard to efficient fluid qualities and successful fracturing operations. In future, there is the potential for ongoing studies to produce specialized macromolecular solutions for increased efficiency and sustainability in oil and gas applications.

Preparation of Two-Dimensional Polyaniline Sheets with High Crystallinity via Surfactant Interface Self-Assembly and Their Encryption Application

In recent years in the field of traditional materials, traditional polyaniline has faced a number of scientific problems such as an irregular morphology, high difficulty in crystallization, and difficulty in forming an ordered structure compared to the corresponding inorganic materials. In response to these urgent issues, this study determines how to prepare a highly ordered structure in polyaniline formed at the gas-liquid interface. By dynamically arranging aniline monomers into a highly ordered structure with sodium dodecyl benzene sulfonate (SDBS) surfactant, aniline polymerization is initiated at the gas-liquid interface, resulting in two-dimensional polyaniline crystal sheets with a highly ordered structure. By elucidating the microstructure, crystallization process, and molecular structure of the two-dimensional polyaniline crystal sheets, the practical application of polyaniline as an encryption label in the field of electrochromism has been further expanded, thus making polyaniline widely used in the field of information encryption. Therefore, the synthesis of flaky polyaniline crystal sheets has a role in scientific research and practical application, which will arouse the interest and exploration of researchers.

Comparative Effects of Hydrazine and Thermal Reduction Methods on Electromagnetic Interference Shielding Characteristics in Foamed Titanium Carbonitride MXene Films

The urgent need for the development of micro-thin shields against electromagnetic interference (EMI) has sparked interest in MXene materials owing to their metallic electrical conductivity and ease of film processing. Meanwhile, postprocessing treatments can potentially exert profound impacts on their shielding effectiveness (SE). This work comprehensively compares two reduction methods, hydrazine versus thermal, to fabricate foamed titanium carbonitride (Ti3CNTx) MXene films for efficient EMI shielding. Upon treatment of ≈ 100 µm-thick MXene films, gaseous transformations of oxygen-containing surface groups induce highly porous structures (up to ≈ 74.0% porosity). The controlled application of hydrazine and heat allows precise regulation of the reduction processes, enabling tailored control over the morphology, thickness, chemistry, and electrical properties of the MXene films. Accordingly, the EMI SE values are theoretically and experimentally determined. The treated MXene films exhibit significantly enhanced SE values compared to the pristine MXene film (≈ 52.2 dB), with ≈ 38% and ≈ 83% maximum improvements for the hydrazine and heat-treated samples, respectively. Particularly, heat treatment is more effective in terms of this enhancement such that an SE of 118.4 dB is achieved at 14.3 GHz, unprecedented for synthetic materials. Overall, the findings of this work hold significant practical implications for advancing high-performance, non-metallic EMI shielding materials.

Sustainable liquid metal-induced conductive nacre

Nacre has inspired research to fabricate tough bulk composites for practical applications using inorganic nanomaterials as building blocks. However, with the considerable pressure to reduce global carbon emissions, preparing nacre-inspired composites remains a significant challenge using more economical and environmentally friendly building blocks. Here we demonstrate tough and conductive nacre by assembling aragonite platelets exfoliated from natural nacre, with liquid metal and sodium alginate used as the "mortar". The formation of GaOC coordination bonding between the gallium ions and sodium alginate molecules reduces the voids and improves compactness. The resultant conductive nacre exhibits much higher mechanical properties than natural nacre. It also shows excellent impact resistance attributed to the synergistic strengthening and toughening fracture mechanisms induced by liquid metal and sodium alginate. Furthermore, our conductive nacre exhibits exceptional self-monitoring sensitivity for maintaining structural integrity. The proposed strategy provides a novel avenue for turning natural nacre into a valuable green composite.

Desirable Strong and Tough Adhesive Inspired by Dragonfly Wings and Plant Cell Walls

The production of wood-based panels has a significant demand for mechanically strong and flexible biomass adhesives, serving as alternatives to nonrenewable and toxic formaldehyde-based adhesives. Nonetheless, plywood usually exhibits brittle fracture due to the inherent trade-off between rigidity and toughness, and it is susceptible to damage and deformation defects in production applications. Herein, inspired by the microstructure of dragonfly wings and the cross-linking structure of plant cell walls, a soybean meal (SM) adhesive with great strength and toughness was developed. The strategy was combined with a multiple assembly system based on the tannic acid (TA) stripping/modification of molybdenum disulfide (MoS2@TA) hybrids, phenylboronic acid/quaternary ammonium doubly functionalized chitosan (QCP), and SM. Motivated by the microstructure of dragonfly wings, MoS2@TA was tightly bonded with the SM framework through Schiff base and strong hydrogen bonding to dissipate stress energy through crack deflection, bridging, and immobilization. QCP imitated borate chemistry in plant cell walls to optimize interfacial interactions within the adhesive by borate ester bonds, boron-nitrogen coordination bonds, and electrostatic interactions and dissipate energy through sacrificial bonding. The shear strength and fracture toughness of the SM/QCP/MoS2@TA adhesive were 1.58 MPa and 0.87 J, respectively, which were 409.7% and 866.7% higher than those of the pure SM adhesive. In addition, MoS2@TA and QCP gave the adhesive good mildew resistance, durability, weatherability, and fire resistance. This bioinspired design strategy offers a viable and sustainable approach for creating multifunctional strong and tough biobased materials.

Constructing Novel High Dielectric Constant Polyimides Containing Dipolar Pendant Groups with Enhanced Orientational Polarization

Polymer dielectrics with high dielectric constant are urgently demanded for potential electrical and pulsed power applications. The design of polymers with side chains containing dipolar groups is considered an effective method for preparing materials with a high dielectric constant and low loss. This study synthesizes and comprehensively compare the dielectric properties of novel polyimides with side chains containing urea (BU-PI), carbamate (BC-PI), and sulfonyl (BS-PI) functional groups. The novel polyimides exhibit relatively high dielectric constant and low dielectric loss values due to the enhanced orientational polarization and suppressed dipole-dipole interactions of dipolar groups. In particular, BU-PI containing urea pendant groups presents the highest dielectric constant of 6.14 and reasonably low dielectric loss value of 0.0097. The strong γ transitions with low activation energies derived from dielectric spectroscopy measurements have been further evaluated to demonstrate the enhanced free rotational motion of urea pendant dipoles. In energy storage applications, BU-PI achieves a discharged energy density of 6.92 J cm-3 and a charge-discharge efficiency above 83% at 500 MV m-1. This study demonstrates that urea group, as dipolar pendant group, can provide polymers with better dielectric properties than the most commonly used sulfonyl groups.

Bioinspired Dielectric Nanocomposites with High Charge-Discharge Efficiency Enabled by Superspreading-Induced Alignment of Nanosheets

High-performance dielectric nanocomposites are promising candidates for thin-film dielectric capacitors for high-power pulse devices. However, the existing nanocomposites suffer from low charge-discharge efficiency (η), which results in severe generation and accumulation of Joule heat and subsequently the failure of the devices. In this work, we report nacre-inspired dielectric nanocomposites with outstanding η, which are enabled by superspreading shear flow-induced highly aligned two-dimensional (2D) nanofillers. Taking boron nitride nanosheets (BNNS) as an example, the highly aligned BNNS in the poly(vinylidene fluoride) (PVDF)-based nanocomposites contributes to a highly efficient Coulomb blockade effect for the injected charge carriers. Therefore, the bioinspired nanocomposites with highly aligned BNNS show significantly reduced dielectric loss (tan δ) (63.3%) and improved η (144.8%), compared to the ones with partially aligned nanosheets fabricated by solution casting. Furthermore, the optimized loading content of BNNS is as low as 3.6 wt %. The resulting nanocomposites exhibit reduced tan δ (0.018) and enhanced Eb (687 kV/mm), η (71%), and Ue (16.74 J/cm3). Our work demonstrates that the realization of high alignment of 2D nanofillers enabled by the superspreading shear flow is a promising way for the development of high-performance dielectric nanocomposites.

Constructing asymmetric gradient structures to enhance the energy storage performance of PEI-based composite dielectrics

Enhancing the high electric field resistance and energy storage capacity of polymer dielectrics has been a long-standing challenge for the iterations of power equipment. Synergistic inhibition of carrier injection and transport is vital to energy storage performance improvement. Herein, promising polymer polyetherimide (PEI) was employed as a matrix and wider bandgap boron nitride nanosheets (BNNSs) were used as a reinforcing filler. Utilizing high-throughput stochastic breakdown simulations with the distribution characteristics of BNNSs as parameters, a series of topological gradient structures with the potential to enhance performance were obtained, thereby shortening the experimental cycle. Changing the BNNS distribution of symmetric/asymmetric and positive/inverse gradients, as well as the total and gradient contents of BNNSs, means that the position and condition of the surface barrier layer and central hinder layer change, which influences the energy storage performance of the polymer at room temperature and high temperature. Remarkably, the asymmetric gradient structure composite dielectrics exhibited excellent performances. Among them, the PEI-based composite dielectric with 2 vol% BNNS asymmetric inverse gradient distribution (gradient content of 1 vol%) achieved energy densities of 8.26 and 4.78 J cm-3 at room temperature and 150 °C, respectively. The asymmetric gradient structure design strategy holds great promise for optimizing the energy storage capacity of polymer dielectric capacitors.

Virus-Like Magnetic Heterostructure: an Outstanding Metal-Complex Active Platform Enables High-Efficiency Separation and Catalysis

Assembled heterostructure systems, as emerging functional materials, have broad applications ranging from enzyme and drug payload to catalysis and purification. However, these require trial- and -error design process and complex experimental environment to generate heterostructure materials. Here, this study describes an easy-to-execute strategy to fabricate magnetic heterostructure as multifunctional delivery system. We utilize first-row transition metal copper and nitroso/amino ligand as modules to assemble around Fe3 O4 magnetic nanoparticles by excessed mild stimuli and fabricate the magnetic heterostructure materials (Fe3 O4 @ TACN NPs (tetraamminecopper (II) nitrate)). Notably, the Fe3 O4 @ TACN NPs present with cat's-whisker structure containing ligand and metal center. The nitroso-group ligands exhibit strong binding affinity to heme-structure enzyme, ensuring effective capture and isolate of cytochrome C (Cyt-c), resulting in their excellent isolation property. The copper complex-powered magnetic heterostructure materials can effectively isolation Cyt-c from complex biological sample (pork heart). Importantly, the Fe3 O4 @ TACN NPs coordinated with heme-structure, induced methionine 80 (Met80) disassociates from heme prosthetic group, and contributed to peroxidase-like (POD-like) activities increasing. These results exhibit that copper complex-powered magnetic heterostructure materials can not only satisfy the Cyt-c isolation and immobilization in an alkaline medium, but also be of the potential for improving the immobilization enzyme reactor performance.

Energy Storage Performance of Polymer-Based Dielectric Composites with Two-Dimensional Fillers

Dielectric capacitors have garnered significant attention in recent decades for their wide range of uses in contemporary electronic and electrical power systems. The integration of a high breakdown field polymer matrix with various types of fillers in dielectric polymer nanocomposites has attracted significant attention from both academic and commercial sectors. The energy storage performance is influenced by various essential factors, such as the choice of the polymer matrix, the filler type, the filler morphologies, the interfacial engineering, and the composite structure. However, their application is limited by their large amount of filler content, low energy densities, and low-temperature tolerance. Very recently, the utilization of two-dimensional (2D) materials has become prevalent across several disciplines due to their exceptional thermal, electrical, and mechanical characteristics. Compared with zero-dimensional (0D) and one-dimensional (1D) fillers, two-dimensional fillers are more effective in enhancing the dielectric and energy storage properties of polymer-based composites. The present review provides a comprehensive overview of 2D filler-based composites, encompassing a wide range of materials such as ceramics, metal oxides, carbon compounds, MXenes, clays, boron nitride, and others. In a general sense, the incorporation of 2D fillers into polymer nanocomposite dielectrics can result in a significant enhancement in the energy storage capability, even at low filler concentrations. The current challenges and future perspectives are also discussed.

Systematic Study of the Nanostructures of Exfoliated Polymer Nanocomposites

High-performance bioinspired materials have shown rapid development over the last decade. Examples are brick-and-mortar hierarchical structures, which are often achieved via solvent evaporation. Although good properties are claimed, most systems are composed of stacked or intercalated platelets. Exfoliation is a crucial step to give ultimate anisotropic properties, e.g., thermal, mechanical, and barrier properties. We propose a general framework for all the various types of micro-scale structures that should be distinguished for 2D filler nanocomposites. In particular, the exfoliated state is systematically explored by the immobilization of montmorillonite platelets via (gelatin) hydrogelation. Scattering techniques were used to evaluate this strategy at the level of the particle dispersion and the regularity of spatial arrangement. The gelatin/montmorillonite exfoliated nanostructures are fully controlled by the filler volume fraction since the observed gallery d-spacings perfectly fall onto the predicted values. Surprisingly, X-ray analysis also revealed short- and quasi long-range arrangement of the montmorillonite clay at high loading.

Photocatalytic Synthesis of Ultrafine Pt Electrocatalysts with High Stability Using TiO2 -Decorated N-Doped Carbon as Composite Support

Commercial Pt/C (Com. Pt/C) electrocatalysts are considered optimal for oxygen reduction and hydrogen evolution reactions (ORR and HER). However, their high Pt content and poor stability restrict their large-scale application. In this study, photocatalytic synthesis was used to reduce ultrafine Pt nanoparticles in-situ on a composite support of TiO2 -decorated nitrogen-doped carbon (TiO2 -NC). The nitrogen-doped carbon had a large surface area and electronic effects that ensured the uniform dispersion of TiO2 nanoparticles to form a highly photoactive and stable support. TiO2 -NC served as a composite support that enhanced the dispersibility and stability of ultrafine Pt electrocatalyst, owing to the presence of N sites and the strong metal-support interaction. Relative to Com. Pt/C, the as-obtained Pt/TiO2 -NC had positive shifts of 44 and 10 mV in the ORR half-wave potential and HER overpotential at -10 mA cm-2 , respectively. After an accelerated durability test, Pt/TiO2 -NC had lower losses in electrochemical specific area (0.7 %) and electrocatalytic activity (0 mV shift) than Com. Pt/C (25.6 %, 22 mV shift). These results indicate that the developed strategy enabled the facile synthesis and stabilization of ultrafine Pt nanoparticles, which improved the utilization efficiency and long-term stability of Pt-based electrocatalysts.

Thermally activated dynamic bonding network for enhancing high-temperature energy storage performance of PEI-based dielectrics

To address the paradox of mutually exclusive confusions between the breakdown strength and polarization of the polymer-based composites at high-temperature, a dynamic multisite bonding network is constructed by connecting the -NH2 groups of polyetherimide (PEI) and Zn2+ in metal-organic frameworks (MOFs). Owing to the multisite bonding network being dynamically stable at high-temperature, the composites possess a high breakdown strength of 588.1 MV m-1 at 150 °C, which is 85.2% higher than that of PEI. Importantly, the multisite bonding network could be thermally activated at high-temperature to generate extra polarization, which is because the Zn-N coordination bonds are evenly stretched. At similar electric fields, the composites show higher energy storage density at high-temperature compared with that at room temperature, and present excellent cycling stability even with increased electrode size. Finally, the reversible stretching of the multisite bonding network against temperature variation is confirmed by the in situ X-ray absorption fine structure (XAFS) and theoretical calculations. This work presents a pioneering example of the construction of self-adaptive polymer dielectrics in extreme environments, which might be a potential method for designing recyclable polymer-based capacitive dielectrics.

Enhanced Electrical and Thermal Conductivities of Polymer Composites with a Segregated Network of Graphene Nanoplatelets

Introducing a segregated network constructed through the selective localization of small amounts of fillers can be a solution to overcome the limitations of the practical use of graphene-based conductive composites due to the high cost of fillers. In this study, polypropylene composites filled with randomly dispersed GNPs and a segregated GNP network were prepared, and their conductive properties were investigated according to the formation of the segregated structure. Due to the GNP clusters induced by the segregated structure, the electrical percolation threshold was 2.9 wt% lower than that of the composite incorporating randomly dispersed GNPs. The fully interconnected GNP cluster network inside the composite contributed to achieving the thermal conductivity of 4.05 W/m∙K at 10 wt% filler content. Therefore, the introduction of a segregated filler network was suitable to simultaneously achieve excellent electrical and thermal conductivities at a low content of GNPs.

Prediction and Control of Thermal Transport at Defective State Gr/h-BN Heterojunction Interfaces

The control of interfacial thermal conductivity is the key to two-dimensional heterojunction in semiconductor devices. In this paper, by using non-equilibrium molecular dynamics (NEMD) simulations, we analyze the regulation of interfacial thermal energy transport in graphene (Gr)/hexagonal boron nitride (h-BN) heterojunctions and reveal the variation mechanism of interfacial thermal energy transport. The calculated results show that 2.16% atomic doping can effectively improve interfacial heat transport by more than 15.6%, which is attributed to the enhanced phonon coupling in the mid-frequency region (15-25 THz). The single vacancy in both N and B atoms can significantly reduce the interfacial thermal conductivity (ITC), and the ITC decreases linearly with the increase in vacancy defect concentration, mainly due to the single vacancy defects leading to an increased phonon participation rate (PPR) below 0.4 in the low-frequency region (0-13 THz), which shows the phonon the localization feature, which hinders the interfacial heat transport. Finally, a BP neural network algorithm is constructed using machine learning to achieve fast prediction of the ITC of Gr/h-BN two-dimensional heterogeneous structures, and the results show that the prediction error of the model is less than 2%, and the method will provide guidance and reference for the design and optimization of the ITC of more complex defect-state heterogeneous structures.

Novel Functionalized Boron Nitride Nanosheets Achieved by Radiation-Induced Oxygen Radicals and Their Enhancement for Polymer Nanocomposites

Boron nitride nanosheets (BNNSs) exfoliated from hexagonal boron nitride (h-BN) show great potential in polymer-based composites due to their excellent mechanical properties, highly thermal conductivity, and insulation properties. Moreover, the structural optimization, especially the surface hydroxylation, of BNNSs is of importance to promote their reinforcements and optimize the compatibility of its polymer matrix. In this work, BNNSs were successfully attracted by oxygen radicals decomposed from di-tert-butylperoxide (TBP) induced by electron beam irradiation and then treated with piranha solution. The structural changes of BNNSs in the modification process were deeply studied, and the results demonstrate that the as-prepared covalently functionalized BNNSs possess abundant surface hydroxyl groups as well as reliable structural integrity. Of particular importance is that the yield rate of the hydroxyl groups is impressive, whereas the usage of organic peroxide and reaction time is greatly reduced due to the positive effect of the electron beam irradiation. The comparisons of PVA/BNNSs nanocomposites further indicate that the hydroxyl-functionalized BNNSs effectively promote mechanical properties and breakdown strength due to the enhanced compatibility and strong two-phase interactions between nanofillers and the polymer matrix, which further verify the application prospects of the novel route proposed in this work.

BNN/TiO2 nanocomposite system-modified dental flow resins and the mechanism of the enhancement of mechanical and antibacterial properties

Robust and antibacterial dental resins are essential for repairing the shape and function of the teeth. However, an ingenious way to achieve a synergistic enhancement of these two properties is still lacking. In this work, guided by molecular dynamics (MD) calculations, a boron nitride nanosheet (BNN)/titanium dioxide (TiO2) nanocomposite system was synthesized and used to modify the dental flow resin to enhance its mechanical and antimicrobial properties. The mechanical and antimicrobial enhancement mechanisms were further explored. The modified resin demonstrated outstanding performance improvement with 88.23%, 58.47%, 82.01%, and 55.06% improvement in compressive strength (CS), microhardness (MH), flexural strength (FS), and elastic modulus (EM), respectively. Moreover, the modified resin could effectively inhibit the growth of Streptococcus mutans (S. mutans) regardless of aging in water and the inhibition rates were more than 90%. In conclusion, the modified resin is expected to be an ideal restorative material for clinical applications.

Surface engineering of mixed conjugated/polyelectrolyte brushes - Tailoring interface structure and electrical properties

HYPOTHESIS

Mixed polymer brushes (MPBs) could be synthesized by surface dilution of homopolymer brushes and subsequent grafting of other type of chains in the formed voids. Nanophase separation and dynamics of surface-grafted chains could be tailored by modification of their molecular architecture. Mixed polyelectrolyte and conjugated chains contribute synergistically to tailor properties of the coating.

EXPERIMENTS

A new synthetic strategy that allowed spatially controlled grafting of poly(sodium 4-styrenesulfonate) chains (PSSNa) in close neighborhood of poly(3-methylthienyl methacrylate) (PMTM) brushes (precursors of the conjugated chains) using surface-initiated polymerizations was developed. The final mixed conjugated/polyelectrolyte brushes were prepared by template polymerization of pendant thiophene groups in PMTM chains. Surface dynamics and nanophase separation of MPBs were studied by nanoscale resolution IR imaging, SIMS profiling and AFM mapping in selective solvents.

FINDINGS

Unconjugated MPBs were shown to undergo vertical, and horizontal nanophase separation, while the size and shape of the nanodomains were dependent on molar ratio of the mixed chains and their relative lengths. Generation of the conjugated chains led to diminishing of nanophase separation thanks to stronger mutual interactions of conjugated PMTM and PSSNa (macromolecular mixing). The obtained systems demonstrated tunable interfacial structure and resistance switching phenomenon desired in construction of smart surfaces or memristive devices.

A Malleable Composite Dough with Well-Dispersed and High-Content Boron Nitride Nanosheets

Aggregation of two-dimensional (2D) nanosheet fillers in a polymer matrix is a prevalent problem when the filler loading is high, leading to degradation of physical and mechanical properties of the composite. To avoid aggregation, a low-weight fraction of the 2D material (<5 wt %) is usually used to fabricate the composite, limiting performance improvement. Here, we develop a mechanical interlocking strategy where well-dispersed high filling content (up to 20 wt %) of boron nitride nanosheets (BNNSs) can be incorporated into a polytetrafluoroethylene (PTFE) matrix, resulting in a malleable, easy-to-process and reusable BNNS/PTFE composite dough. Importantly, the well-dispersed BNNS fillers can be rearranged into a highly oriented direction due to the malleable nature of the dough. The resultant composite film has a high thermal conductivity (4408% increase), low dielectric constant/loss, and excellent mechanical properties (334%, 69%, 266%, and 302% increases for tensile modulus, strength, toughness, and elongation, respectively), making it suitable for thermal management applications in the high-frequency areas. The technique is useful for the large-scale production of other 2D material/polymer composites with a high filler content for different applications.

Applications of Graphene in Five Senses, Nervous System, and Artificial Muscles

Graphene remains of great interest in biomedical applications because of biocompatibility. Diseases relating to human senses interfere with life satisfaction and happiness. Therefore, the restoration by artificial organs or sensory devices may bring a bright future by the recovery of senses in patients. In this review, we update the most recent progress in graphene based sensors for mimicking human senses such as artificial retina for image sensors, artificial eardrums, gas sensors, chemical sensors, and tactile sensors. The brain-like processors are discussed based on conventional transistors as well as memristor related neuromorphic computing. The brain-machine interface is introduced for providing a single pathway. Besides, the artificial muscles based on graphene are summarized in the means of actuators in order to react to the physical world. Future opportunities remain for elevating the performances of human-like sensors and their clinical applications.

Structural and Optical Characterization of g-C3N4 Nanosheet Integrated PVC/PVP Polymer Nanocomposites

The present work considers the integration of g-C₃N₄ nanosheets into PVC/PVP polymer nanocomposites at ratios of 0.0, 0.3, 0.6, and 1.0 wt%. The XRD data scans showed semicrystalline structures for all PVC/PVP/g-C₃N₄ polymer blend films. The FTIR and Raman measurements revealed intermolecular hydrogen bonding between the g-C₃N₄ surface and the OH^- groups of the PVC/PVP network. ESEM morphology analysis for PVC/PVP/g-C₃N₄ nanocomposite films displayed homogeneous surface textures. The data of TGA showed improved thermal stability as the decomposition temperature increased from 262 to 276 °C with the content of g-C₃N₄ (0.0-1.0 wt%). The optical absorbance data for PVC/PVP films improved after the addition of g-C₃N₄. The optical energy gaps showed compositional dependence on the g-C₃N₄ content, which changed from 5.23 to 5.34 eV at indirect allowed transitions. The refractive index for these blend films enhanced (1.83-3.96) with the inclusion of g-C₃N₄. Moreover, the optical susceptibility for these nanocomposite films increased as the content of g-C₃N₄ changed from 0.0 to 1.0 wt%. Finally, the values of the nonlinear refractive index showed improvement with the increased percentage of g-C₃N₄. When g-C₃N₄ was added up to 1.0 wt%, the DC conductivity improved from 4.21 × 10^-8 to 1.78 × 10^-6 S/cm. The outcomes of this study prove the suitable application of PVC/PVP/g-C₃N₄ in optoelectronic fiber sensors.

Improving the Energy Storage Performance of All-Polymer Composites By Blending PVDF and P(VDF-CTFE)

Organic film capacitors have incredibly high power density and have an irreplaceable position in pulsed power systems, high-voltage power transmission networks and other fields. At present, the energy storage density and energy storage efficiency of organic film capacitors are relatively low, resulting in excessive equipment volume. The performance of organic film capacitors is determined by polymer materials, so it is crucial to develop a polymer composite with high energy storage density and high charge-discharge efficiency. Poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-CTFE)) is incorporated into the polyvinylidene fluoride (PVDF) matrix by solution blending. The successful preparation of the all-polymer composite material solves the problems of low breakdown electric field strength, low discharge energy density, and low charge-discharge efficiency of high-dielectric ferroelectric materials. The discharge energy density of the PVDF/P(VDF-CTFE) (70/30) film is more than twice that of pure PVDF due to the increase of phases α and γ and the decrease of crystallinity. Under the breakdown electric field (380 kV mm^-1 ), PVDF/P(VDF-CTFE) (70/30) film also has an ultrahigh energy storage efficiency of 64%. The relationship between the structure and properties of composite materials is investigated in this study, which has important implications for the development of capacitors with high energy storage density.

Materials Horizons Emerging Investigator Series: Dr Yu Feng, Harbin University of Science and Technology, China

Our Emerging Investigator Series features exceptional work by early-career materials science researchers. Read Yu Feng's Emerging Investigator Series article 'Ultrahigh energy storage performance of all-organic dielectrics at high-temperature by tuning the density and location of traps' (https://doi.org/10.1039/D2MH00912A) and find out more about him in the interview below.

The Dispersion and Coagulation of Negatively Charged Ca2Nb3O10 Perovskite Nanosheets in Sodium Alginate Dispersion

Chemically exfoliated nanosheets have been extensively employed as functional nanofillers for the fabrication of polymer nanocomposites due to their remarkable electrical, magnetic and optical properties. However, achieving a good dispersion of charged nanosheets in polymer matrix, which will determine the performance of polymer nanocomposites, remains a challenge. Herein, we investigated the dispersion and aggregation behavior of negatively charged Ca₂Nb₃O₁₀ (CNO) perovskite nanosheets in negatively charged sodium alginate (SA) aqueous dispersion using dynamic light scattering (DLS). When CNO nanosheets meet with SA, aggregation and coagulation inevitably occurred owing to the absorption of SA on nanosheets. By controlling the electrostatic attraction between positively charged poly(ethylene imine) (PEI) and negatively charged SA, the charge density and hydrodynamic size of SA can be tuned to enable the good dispersion of CNO nanosheets in SA. This result may provide a new strategy to achieve the good dispersion of charged nanosheets in charged polymers for the rational design of multifunctional nanocomposites.

Enhanced Energy Storage Performance of PVDF-Based Composites Using BN@PDA Sheets and Titania Nanosheets

With the rapid development of modern electrical and electronic applications, the demand for high-performance film capacitors is becoming increasingly urgent. The energy density of a capacitor is dependent on permittivity and breakdown strength. However, the development of polymer-based composites with both high permittivity (εr) and breakdown strength (Eb) remains a huge challenge. In this work, a strategy of doping synergistic dual-fillers with complementary functionalities into polymer is demonstrated, by which high εr and Eb are obtained simultaneously. Small-sized titania nanosheets (STNSs) with high εr and high-insulating boron nitride sheets coated with polydopamine on the surface (BN@PDA) were introduced into poly(vinylidene fluoride) (PVDF) to prepare a ternary composite. Remarkably, a PVDF-based composite with 1 wt% BN@PDA and 0.5 wt% STNSs (1 wt% PVDF/BN@PDA-STNSs) shows an excellent energy storage performance, including a high εr of ~13.9 at 1 Hz, a superior Eb of ~440 kV/mm, and a high discharged energy density Ue of ~12.1 J/cm3. Moreover, the simulation results confirm that BN@PDA sheets improve breakdown strength and STNSs boost polarization, which is consistent with the experimental results. This contribution provides a new design paradigm for energy storage dielectrics.

A Review of Advancing Two-Dimensional Material Membranes for Ultrafast and Highly Selective Liquid Separation

Membrane-based nanotechnology possesses high separation efficiency, low economic and energy consumption, continuous operation modes and environmental benefits, and has been utilized in various separation fields. Two-dimensional nanomaterials (2DNMs) with unique atomic thickness have rapidly emerged as ideal building blocks to develop high-performance separation membranes. By rationally tailoring and precisely controlling the nanochannels and/or nanoporous apertures of 2DNMs, 2DNM-based membranes are capable of exhibiting unprecedentedly high permeation and selectivity properties. In this review, the latest breakthroughs in using 2DNM-based membranes as nanosheets and laminar membranes are summarized, including their fabrication, structure design, transport behavior, separation mechanisms, and applications in liquid separations. Examples of advanced 2D material (graphene family, 2D TMDs, MXenes, metal-organic frameworks, and covalent organic framework nanosheets) membrane designs with remarkably perm-selective properties are highlighted. Additionally, the development of strategies used to functionalize membranes with 2DNMs are discussed. Finally, current technical challenges and emerging research directions of advancing 2DNM membranes for liquid separation are shared.

Energy Storage Application of All-Organic Polymer Dielectrics: A Review

With the wide application of energy storage equipment in modern electronic and electrical systems, developing polymer-based dielectric capacitors with high-power density and rapid charge and discharge capabilities has become important. However, there are significant challenges in synergistic optimization of conventional polymer-based composites, specifically in terms of their breakdown and dielectric properties. As the basis of dielectrics, all-organic polymers have become a research hotspot in recent years, showing broad development prospects in the fields of dielectric and energy storage. This paper reviews the research progress of all-organic polymer dielectrics from the perspective of material preparation methods, with emphasis on strategies that enhance both dielectric and energy storage performance. By dividing all-organic polymer dielectrics into linear polymer dielectrics and nonlinear polymer dielectrics, the paper describes the effects of three structures (blending, filling, and multilayer) on the dielectric and energy storage properties of all-organic polymer dielectrics. Based on the above research progress, the energy storage applications of all-organic dielectrics are summarized and their prospects discussed.