Macroporous rubber gels as reusable sorbents for the removal of oil from surface waters

Silicone cryogel skeletons enhance the survival and mechanical integrity of hydrogel-encapsulated cell therapies

The transplantation of engineered cells that secrete therapeutic proteins presents a promising method for addressing a range of chronic diseases. However, hydrogels used to encase and protect non-autologous cells from immune rejection often suffer from poor mechanical properties, insufficient oxygenation, and fibrotic encapsulation. Here, we introduce a composite encapsulation system comprising an oxygen-permeable silicone cryogel skeleton, a hydrogel matrix, and a fibrosis-resistant polymer coating. Cryogel skeletons enhance the fracture toughness of conventional alginate hydrogels by 23-fold and oxygen diffusion by 2.8-fold, effectively mitigating both implant fracture and hypoxia of encapsulated cells. Composite implants containing xenogeneic cells engineered to secrete erythropoietin significantly outperform unsupported alginate implants in therapeutic delivery over 8 weeks in immunocompetent mice. By improving mechanical resiliency and sustaining denser cell populations, silicone cryogel skeletons enable more durable and miniaturized therapeutic implants.

Hydrophobic organogel sorbent and its coated porous substrates for efficient oil/water emulsion separation and effective spilled oil remediation

Frequent offshore oil leakage accidents and large quantities of oily-wastewater produced in industry and daily life bring huge challenges to global water purification. The adaptability and stability of organogels as adsorbent materials have shown wide application prospects in the field of oil-water separation. Herein, the organogels displayed stable hydrophobic/lipophilic properties with high absorption ability (1200 wt./wt%), efficient sorption of multiple emulsions (>99.0%), and good reusability. More importantly, the organogels were successfully assembled with 2D/3D substrates to achieve excellent sorption capacity (102.5 g/g) and recycling performance (50 cycles). The gel-carbon black assembled on MS (GCB-MS) sorbent with excellent photothermal conversion performance, and can rapidly heat the surface to 70.4 °C under 1.0 sunlight radiation (1.0 kW/m2) and achieved an ultra-high sorption capacity of about 103 g/g for viscous crude oil. Meanwhile, the GCB-MS was combined with a pump to build continuous oil spill cleaning equipment to achieve a super-fast cleanup rate of 6.83 g/min. The developed hydrophobic organogels had been expanded unprecedentedly to realize the comprehensive treatment of oily-wastewater in complex environments, including layered oils, emulsions, and viscous crude oil spill, which provided an effective path for the comprehensive treatment of oily wastewater in complex environments.

Multifunctional Oil Absorption with Macroporous Polystyrene Fibers Incorporating Silver-Doped ZnO

Hydrophobic microporous polystyrene (PS) fibers are fabricated by a solvent-induced phase-separation-assisted electrospinning method. Zinc oxide (ZnO) and silver-doped zinc oxide (Ag-ZnO) nanomaterials with variable morphologies are added to the PS fibers, to investigate the influence of multifunctional nanofiller addition on the porosity and consequent oil-adsorbing properties for different oil types. The doping of silver as well as the uniformity in particle distribution are confirmed by scanning electron microscopy and the energy-dispersive spectral analyses. The porosity of the fibers and their crystallinity effect depend on the hydrophobicity and surface properties of these microporous nanofilled fibers. Ag-ZnO, specifically in 2 wt %, enhanced the pore size and distribution in PS porous fibers, thereby enhancing the oil-adsorbing property and its hydrophobicity. In-depth analysis of the oil adsorption mechanism is done for the fibers, both qualitatively and quantitatively, to demonstrate its correlation with the structural integrity of the fibers. The PS/2Ag-ZnO composite also exhibits the highest antibacterial performance against Staphylococcus aureus, a general indication of antibiological fouling properties of these oil-separating films. The antifouling/antibacterial activity of the nanoparticles and high oil sorption capacity of the highly porous PS composites show great potential for use in water-treatment-related applications.

Influence of succinylation of a wide-pore albumin cryogels on their properties, structure, biodegradability, and release dynamics of dioxidine loaded in such spongy carriers

The goal of this study was to reveal how the chemical modification, succinylation in this case, of the wide-pore serum-albumin-based cryogels affects on their osmotic characteristics (swelling extent), biodegradability and ability to be loaded with the bactericide substance - dioxidine, as well as on its release. The cryogels were prepared via the cryogenic processing (freezing - frozen storage - thawing) of aqueous solutions containing bovine serum albumin (50 g/L), denaturant (urea or guanidine hydrochloride, 1.0 mol/L) and reductant (cysteine, 0.01 mol/L). Freezing/frozen storage temperatures were either -15, or -20, or -25 °C. After defrosting, spongy cryogels were obtained that possessed the system of interconnected gross pores, whose shape and dimensions were dependent on the freezing temperature and on the type of denaturant introduced in the feed solution. Subsequent succinylation of the resultant cryogels caused the growth of the swelling degree of the pore walls of these spongy materials, resulted in strengthening of their resistance against of trypsinolysis and gave rise to an increase in their loading capacity with respect to dioxidine. With that, the microbiological tests showed a higher bactericidal activity of the dioxidine-loaded sponges based on the succinylated albumin cryogels as compared to that of the drug-carriers based on the non-modified protein sponges.

Macroporous Oil-Sorbents with a High Absorption Capacity and High-Temperature Tolerance Prepared through Cryo-Polymerization

The facile preparation and admirable performance of macro-porous poly(lauryl acrylate)-based oil-sorbents for organic solvents and oils are reported in this manuscript. Cryo-polymerizations of lauryl acrylate (LA) with ethylene glycol dimethacrylate (EGDMA) as the cross-linker were carried out at temperatures below the freezing point of the polymerization mixture. The polymerization medium and pore-forming agent was 1,4-dioxane. The influences of the total monomer concentration, EGDMA content and cryo-polymerization temperature on the structure of the obtained P(LA-co-EGDMA) cryogels were investigated with the techniques of Fourier transform infrared spectroscopy, scanning electron microscopy, contact angle measurement and thermo-gravimetric analysis. Through the modulation of the crosslinking density and porosity of these cryogels, the P(LA-co-EGDMA) oil-sorbents demonstrated a high absorption capacity for organic solvents and oils, recyclability and high-temperature tolerance. The absorption capacity reached 20-21 and 16-17 g/g for toluene and gasoline oil, respectively. Those fabricated sorbents survived high temperatures up to 150 °C without any change in absorption capacity as well as porosity. Considering the convenient synthesis process and absorption performance, the present work offers a remarkable opportunity to bring polymer cryogels to practical application in waste oil clean-up.

Single-, Double-, and Triple-Network Macroporous Rubbers as a Passive Sampler

Over the past decades, large quantities of organic compounds including polycyclic aromatic hydrocarbons (PAHs) entering aquatic systems create acutely toxic effects and chronic abnormalities in aquatic organisms. Passive sampling is an effective technique to detect organic compounds at very low concentrations in water by accumulating them in their structure to a measurable concentration level. Polymeric passive samplers reported so far have a nonporous structure, and hence, the absorption of organic compounds into the passive sampler is governed by their slow diffusion process. We present here novel macroporous rubber sorbents as monophasic passive samplers with tunable pore morphologies, extraordinary mechanical properties, and high sorption rates and capacities for PAHs. Sorbent materials based on single-network (SN), double-network (DN), and triple-network (TN) butyl rubber were prepared via the cryogelation technique from butyl rubber solutions in benzene as the solvent at -18 °C using a sulfur monochloride cross-linker. To obtain macroporous rubbers with DN and TN structures, the reactions were conducted in the macropores of SN and DN rubber networks, respectively. The porous morphology and the mechanical behavior of the rubbers can be tuned by adjusting the weight ratio w_R of the network components. The rubbers exhibit two generations of pores, namely, large and small pores with diameters 40-240 and 14-54 μm, respectively. The sizes of both large and small pores decrease and approach each other as w_R is increased. Four PAH compounds, namely, naphthalene, phenanthrene, fluoranthene, and pyrene with two to four aromatic rings, dissolved in filtered seawater with a salinity of 22 ppt were used to highlight the correlations between the properties of macroporous rubbers and their absorption rates and capacities. Nonporous silicone rubber reported before as a passive sampler has the lowest absorption rate and capacity as compared to the macroporous rubbers. The SN rubber absorbs most rapidly PAHs because of its largest porosity, whereas the TN rubber with the smallest pores exhibits the highest sorption capacity.

Highly Stretchable and Rapid Self-Recoverable Cryogels Based on Butyl Rubber as Reusable Sorbent

Cryogels based on hydrophobic polymers combining good mechanical properties with fast responsivity are attractive materials for many applications, such as oil spill removal from water and passive sampler for organic pollutants. We present, here, cryogels based on butyl rubber (BR) with a high stretchability, rapid self-recoverability, and excellent reusability for organic solvents. BR cryogels were prepared at subzero temperatures in cyclohexane and benzene at various BR concentrations in the presence of sulfur monochloride (S₂Cl₂) as a crosslinker. Although the properties of BR cryogels are independent of the amount of the crosslinker above a critical value, the type of the solvent, the cryogelation temperature, as well as the rubber content significantly affect their properties. It was found that benzene produces larger pore volumes as compared to cyclohexane due to the phase separation of BR from benzene at low temperatures, producing additional pores. Increasing cryogelation temperature from −18 to −2 °C leads to the formation of more ordered and aligned pores in the cryogels. Increasing BR content decreases the amount of unfrozen microphase of the frozen reaction solution, leading to a decrease in the total porosity of the cryogels and the average diameter of pores. Cryogels formed at −2 °C and at 5% (w/v) BR in cyclohexane sustain up to around 1400% stretch ratios. Cryogels swollen in toluene can completely be squeezed under strain during which toluene is released from their pores, whereas addition of toluene to the squeezed cryogels leads to recovery of their original shapes.

A review on sorbent devices for oil-spill control

Multiple research areas have emerged in view of the deleterious impacts of oil-spills on the environment and the relative intractability of the problem per se. The dimensions mostly explored thus far, relate to the prediction of the fate of oil-spill and development of effective counter-measures. Among the counter measures, development of effective sorbents for oil-spill remediation has sustained interest for quite long, in spite of the numerous challenges associated with it. Most importantly, the sorbent materials need to be assembled in such a structure or form that they can survive the oceanic currents and other prevailing environmental conditions without themselves becoming a source of secondary pollution. This review paper focuses on the chronological development of such assemblies or devices over the past century and a critical appraisal of the same. Relevant major factors affecting the performance of sorbent assemblies can be identified as: structural features and modes of sorption, effect of weathering on oil-sorption capacity, mode of distribution and harvesting of such absorbent units, and the final disposal after feasible cycles of sorption and release. This review paper incorporates a detailed discussion on the major inventions and the extant open literature in this field.

Cryostructuring of Polymeric Systems. 50.† Cryogels and Cryotropic Gel-Formation: Terms and Definitions

A variety of cryogenically-structured polymeric materials are of significant scientific and applied interest in various areas. However, in spite of considerable attention to these materials and intensive elaboration of their new examples, as well as the impressive growth in the number of the publications and patents on this topic over the past two decades, a marked variability of the used terminology and definitions is frequently met with in the papers, reviews, theses, patents, conference presentations, advertising materials and so forth. Therefore, the aim of this brief communication is to specify the basic terms and definitions in the particular field of macromolecular science.

Effective clean-up of organic liquid contaminants including BTEX, fuels, and organic solvents from the environment by poly(alkoxysilane) sorbents

Novel cross-linked poly(alkoxysilane)s, which can be used for the removal of organic liquid contaminants from water, were synthesized in one step, in a solvent free reaction medium, at moderately high temperature without using a catalyst. The synthesized polymers were characterized by Fourier transform infrared spectroscopy (FTIR), solid-state (13)C and (29)Si cross-polarization magic angle spinning (CPMAS) nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) methods and elemental analysis. The swelling features of the poly(alkoxysilane)s were investigated in organic solvents and oils, such as dichloromethane, benzene, toluene, xylene, methyl tertiary butyl ether, and also some fuel derivatives, such as gasoline and euro diesel. All polymers have high-fast solvent uptake abilities, good reusability and thermal stability. The swelling features of the synthesized cross-linked polymers were evaluated by the swelling test, absorption-desorption kinetics. Thus, the results propose that cross-linked poly(alkoxysilane)s are suitable for the absorption of oil-organic pollutants from the water surface.

Cross-linked poly(tetrahydrofuran) as promising sorbent for organic solvent/oil spill

In this study, a series of different molecular weights of poly(tetrahydrofuran) (PTHF), which is one of the most important commercial polymers around the world, was condensed with tris[3-(trimethoxysilyl)propyl]isocyanurate (ICS) to generate a cross-linked 3-dimensional network in order to obtain organic solvent/oil sorbents having high swelling capacity. The prepared sorbents show high and fast swelling capacity in oils such as dichloromethane (DCM), tetrahydrofuran (THF), acetone, t-butyl methyl ether (MTBE), gasoline, euro diesel, and crude oil. The recovery of the absorbed oils from contaminated surfaces, especially from water, and the regeneration of the sorbents after several applications are effective. The characterization and thermal properties of the sorbents are identified by Fourier transform infrared spectroscopy (FTIR), solid-state (13)C and (29)Si cross-polarization magic angle spinning (CPMAS) nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and thermal gravimetric analyses (TGA), respectively. The new usage area of PTHF is emerged by the preparation of PTHF-based network structure with high oil absorption capacity and having excellent reusability as an oil absorbent for the removal of organic liquids from the spill site.

Fabrication of a monolithic cryogel from the cyclohexane organogel of a coordination polymer based on a phosphoester

A monolithic coordination polymer ([Sm(dehp)₃]) has been successfully prepared through the lyophilization of a cyclohexane organogel.

Poly(alkoxysilane) reusable organogels for removal of oil/organic solvents from water surface

Novel poly(alkoxysilane)s with high oil and organic solvent absorbencies were prepared by a bulk polymerization technique via the condensation of 1,3-benzenedimethanol with different lengths of alkoxysilanes at 160 °C without using a catalyst. The influence of the length of the alkoxysilane on the polymer properties and swelling ratios was investigated. Swelling experiments in various solvents indicated that these cross-linked poly(alkoxysilane)s can be used as absorbents for oils and oil-derived organic solvents. The swelling features of the poly(alkoxysilane)s were determined by solvent absorption tests, swelling kinetics experiments, and desorption kinetics measurements. The absorption capacities of the poly(alkoxysilane)s were 50-725% for various organic solvents and oil derivatives such as gasoline and diesel. The structural and thermal properties of the cross-linked poly(alkoxysilane) polymers were determined by FTIR, solid-state (13)C and (29)Si cross-polarization magic angle spinning (CP-MAS) NMR, and thermal gravimetric analysis (TGA).

A rapid and facile preparation of novel macroporous silicone-based cryogels via photo-induced thiol–ene click chemistry

We prepared novel cryogels via facile thiol–ene reaction at low temperatures, which can selectively remove oils with excellent recyclability.

Topological characterization of a bacterial cellulose-acrylic acid polymeric matrix

This paper focuses on the micro- and nano-topological organization of a hydrogel, constituted by a mixture of bacterial cellulose and acrylic acid, and intended for biomedical applications. The presence of acrylic acid promotes the formation of two interpenetrated continuous phases: the primary "pores phase" (PP) containing only water and the secondary "polymeric network phase" (PNP) constituted by the polymeric network swollen by the water. Low field Nuclear Magnetic Resonance (LF NMR), rheology, Scanning Electron Microscopy (SEM) and release tests were used to determine the characteristics of the two phases. In particular, we found that this system is a strong hydrogel constituted by 81% (v/v) of PP phase the remaining part being occupied by the PNP phase. Pores diameters span in the range 10-100 μm, the majority of them (85%) falling in the range 30-90 μm. The high PP phase tortuosity indicates that big pores are not directly connected to each other, but their connection is realized by a series of interconnected small pores that rend the drug path tortuous. The PNP is characterized by a polymer volume fraction around 0.73 while mesh size is around 3 nm. The theoretical interpretation of the experimental data coming from the techniques panel adopted, yielded to the micro- and nano-organization of our hydrogel.

Preparation and absorption behavior to organic pollutants of macroporous hydrophobic polyvinyl alcohol–formaldehyde sponges

A series of macroporous hydrophobic polyvinyl alcohol–formaldehyde sponges (PVF–G_n–H_ms) are preparedviathe reactions of hydrophilic polyvinyl alcohol–formaldehyde (PVF) sponges with glutaraldehyde (GA) and fatty acyl chloride. Both ATR-IR and solid-state CP/MAS.

Graphite/isobutylene-isoprene rubber highly porous cryogels as new sorbents for oil spills and organic liquids

The preparation, by a freeze-thaw method, of new graphite/isobutylene-isoprene rubber (IIR) sorbents for oil and organic liquid is described. Graphite was expected to improve the adsorption properties. The cryogels were prepared by solution crosslinking IIR rubber in the presence of graphite in benzene at various temperatures, using sulfur monochloride as the crosslinker, and characterized by SEM and contact angle measurements. The dried cryogels, with interconnected macropores were sponge-like soft materials, with excellent buoyancy and hydrophobicity. They also showed excellent sorption characteristics, with the best sample exhibiting maximum sorption capacities of 17.8 g g(-1) for crude oil, 21.6 g g(-1) for diesel oil, and 23.4 g g(-1) for lubricating oil, respectively. The samples also showed excellent sorption capability for organic liquids, absorbing up to around twenty times their own mass. After rapid and effective desorption, taking just 3-5 h, the cryogels were recovered. They could also be reused more than 30 times by simply centrifuging to remove the sorbed liquid. These characteristics mean that the cryogels prepared in this study are promising materials for removal of large-scale oil or toxic organic spills.

Phase-selective sorbent xerogels as reclamation agents for oil spills

12-Hydroxystearic acid (12-HSA) xerogels derived from 12-HSA-acetronitrile organogels are highly effective sorbent materials capable of adsorbing apolar, spilled materials in aqueous environments. 12-HSA xerogels made from 12-HSA-acetronitrile organogels are more effective than 12-HSA xerogels made from 12-HSA-pentane organogels because of the highly branched fibrillar networks established in acetonitrile molecular gels. This difference arises because of dissimilarities in the network structure between 12-HSA in various solvents. These xerogels, being thermoreversible, allow for both the spilled oil to be reclaimed but also the gelator may be reused to engineer new xerogels for oil spill containment and cleanup.

Hydrophobic Nano-Silica/Isobutylene-Isoprene Rubber Cryogels as Efficient and Reusable Sorbents for Oil Spills and Organic Liquids

In this paper, a new kind of nano-silica embedded cryogel was prepared by solution crosslinking isobutylene-isoprene rubber with silica in benzene at various temperatures. The characteristics of cryogels were manifested by SEM. Sorption tests showed that the cryogels were efficient at removing kinds of oil, aromatic compound and alkane. The results suggested that the maximum sorption capacity was 15.44 g.g-1 for crude oil, 15.62 g.g-1 for diesel and 13.16 g.g-1 for lubricating oil, respectively. Moreover, the cryogels were reusable once they were centrifuged, leading to continuous sorption capacity for these oils. Therefore, the cryogel might be a promising removal material which can be used in large-scale oil or toxic organic liquids spills.