Fluorescent sensor for selective detection of Al(3+) based on quinoline-coumarin conjugate

Nitroquinolone Fused Salicyl and Naphthyl Hydrazone Fluorescent Probes for the Detection of Fe3+and Pb2+ Ions

The application of quinolones stretches over a large umbrella of medicinal field as well as chemosensor due to the presence of privileged heterocyclic aromatic rig system. Salicyl and Naphthyl Hydrazide motifs are also established fluorophore groups. Therefore in this work, we have designed and synthesized Salicyl hydrazide (3a-c) and naphthyl hydrazide fused nitroquinolones (5a-c) investigated for their fluorescent behaviour. Preliminary UV- absorption studies were carried out and the metal selectivity were examined with various metal ion. Among them, it was found that compound 3a was selective towards Fe3+ ions (λex = 330 nm, 1:1 DMF:H2O at pH = 7.4 in HEPES Buffer medium). 3a shows decrease emission intensity in presence of Fe3+ ions. Compound 5a shows enhancement in fluorescence intensity upon addition of Pb2+ ion (λex = 280 nm, 1:1 DMF:H2O at pH = 7.4 in HEPES Buffer medium). Further, the concentration dependence, competitive binding and EDTA reversibility were studied for selected compounds towards the respective cations selectivity. Jobs plot analysis indicate that 1:1 binding of 3a with Fe3+ ion (Ka = 3.17 x104M-1 and Limit Of Detection (LOD) = 5.1 × 10-7 M) whereas 5a showed 1:2 binding mode with Pb2+ ions (Ka = 2.14 × 106 M-1 and Limit Of Detection (LOD) = 2.613 × 10-9 M). Density Function Theoretical studies were performed as support for the experimental results.

A novel Zn2+-coordination fluorescence probe for sensing HPPD inhibitors and its application in environmental media and biological imaging

Mesotrione, topramezone, tembotrione, and sulcotrione are four types of 4-hydroxyphenylpyruvate dioxidase (HPPD) inhibitor herbicides that are extensively employed in agricultural practices, but their usage also leads to environmental pollution and poses risks to human health. A probe (E)-1-((2-(pyridin-2-yl) hydrazineylidene) methyl) naphthalen-2-ol (CHMN) based on chelation enhancement (CHEF) effect synthesized. CHMN was first chelated with Zn2+ to form a probe system with green, which can be further used to detect mesotrione, topramezone, tembotrione and sulcotrione in complicated environment. CHMN-Zn2+ detection of four pesticides was accurate, with an excellent linear relationship between 0 and 100 μM. The detection limits were LODmesotrione = 7.79 μM, LODtopramezone = 1.91 μM, LODtembotrione = 1.38 μM and LODsulcotrione = 2.43 μM. The detection time is 1 min, and it is successfully applied in real water sample and bioimaging. This work can provide a novel method for studying the migration and behavior of environmental pollutants.

Fluorescent Turn-On Anthracene-Based Aluminum(III) Sensor for a Therapeutic Study in Alzheimer's Disease Model of Drosophila

A new anthracene-based probe (E)-N'-(1-(anthracen-9-yl)ethylidene)-2-hydroxybenzohydrazide (AHB) has been efficiently synthesized and characterized by various spectroscopic methods. It exhibits extremely selective and sensitive fluorometric sensing of Al3+ ions with a large enhancement in the fluorescent intensity due to the restricted photoinduced electron transfer (PET) mechanism with a chelation-enhanced fluorescence (CHEF) effect. The AHB-Al3+ complex shows a remarkably low limit of detection at 0.498 nM. The binding mechanism has been proposed based on Job's plot, 1H NMR titration, Fourier transform infrared (FT-IR), high-resolution mass spectrometry (HRMS), and density functional theory (DFT) studies. The chemosensor is reusable and reversible in the presence of ctDNA. The practical usability of the fluorosensor has been established by a test strip kit. Further, the therapeutic potential of AHB against Al3+ ion-induced tau protein toxicity has been tested in the eye of Alzheimer's disease (AD) model of Drosophila via metal chelation therapy. AHB shows great therapeutic potential with 53.3% rescue in the eye phenotype. The in vivo interaction study of AHB with Al3+ in the gut tissue of Drosophila confirms its sensing efficiency in the biological environment. A detailed comparison table included evaluates the effectiveness of AHB.

Azo-hydrazone tautomerism in a simple coumarin azo dye and its contribution to the naked-eye detection of Cu2+ and other potential applications

A new tailor-made azo dye of coumarin connected to phenolic derivative is presented herein. Azo-hydrazone tautomerism in aqueous solution of the dye was observed and studied using spectroscopic assays such as ¹H NMR, absorption and emission assays, and theoretical studies. Tautomerism was attributed to the presence of a labile phenolic hydrogen in the ortho position to the azo functionality and the hydrazone was found to be the more dominant tautomer. Influence of metal ions on the azo-hydrazone chemical equilibrium and how the accompanying colour and spectroscopic changes can be exploited for various functions, especially the detection and quantification of Cu²⁺ in aqueous environments was explored. The presence of Cu²⁺ affects the azo-hydrazone equilibrium resulting in visual appearance and spectroscopic changes and the likely binding sites for Cu²⁺ were evaluated. Cu²⁺ pushes the azo-hydrazone equilibrium towards the more conjugated form and the presence of other metal ions does not have any perceivable impact on this mechanism. The dye showed potential applications as a sensor in colorimetric and spectroscopic detection and quantification of Cu²⁺ in domestic and environmental water samples, photo-imprinting and as a logic gate. The limits of detection (LOD) and quantification (LOQ) for Cu²⁺ were found to be 0.0779 mg/L and 0.236 mg/L, respectively, much lower than the World Health Organization (WHO) guideline limit for Cu²⁺ levels in drinking water.

A new naphthalimide-picolinohydrazide derived fluorescent "turn-on" probe for hypersensitive detection of Al3+ ions and applications of real water analysis and bio-imaging

The development of high-selective chemosensors for trace Al³⁺ detection in the ecosystem is crucially importance due to its detrimental effects. In this work, a simple Schiff-base fluorescent probe NPP derived from naphthalimide and picolinohydrazide was rationally designed and prepared for efficient detection of Al³⁺. NPP exhibited prominent sensing behaviors toward Al³⁺ with low detection limit (LOD) (39 nM), rapid response time (1 min), strong binding affinity (4.02 × 10⁴), good anti-interference characteristics and visual detection. Binding ratio of NPP-Al³⁺ complex was determined to be 1:1 by Job's plot analysis. In addition, the chelation mechanism of NPP with Al³⁺ ions was proposed and substantiated by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT), IR spectrum and ¹H NMR titration experiments. Furthermore, this "signal-on" probe NPP was efficiently utilized as a promising indicator for Al³⁺ detection in environmental and biological samples.

A purine based fluorescent chemosensor for the selective and sole detection of Al3+ and its practical applications in test strips and bio-imaging

A novel purine Schiff base fluorescent probe (WYW), (E)-4-methyl-2-((2-(9-(naphthalen-1-yl)-8-(thiophen-2-yl)-9H-purin-6-yl)hydrazono)methyl)phenol, was designed and prepared as an excellent reversible fluorescent chemosensor for monitoring Al³⁺. The fluorogenic "turn-on" sensor WYW exhibited high selectivity towards Al³⁺ over other coexistent metal ions, accompanying with an obvious visual color change in DMSO/H₂O (9/1, v/v, pH = 7.4) media. The enhancement fluorescence of WYW could be attributed to the inhibition of PET and ESIPT process induced by Al³⁺. Notably, the WYW-Al³⁺ complex exhibited a fluorescence "turn-off" response towards F^- with exceptional selectivity via the displacement approach. The detection limit of WYW for Al³⁺ was calculated to be as low as 82 nM. The formation of complex WYW-Al³⁺ (1:1 stoichiometry) was confirmed by Job's methods and further verified by density functional theory (DFT) calculations. Furthermore, the probe WYW with low cytotoxicity and excellent membrane-permeable property has also been successfully applied for detecting low concertation Al³⁺ in living HeLa cells.

A “turn-on” small molecule fluorescent sensor for the determination of Al3+ ion in real samples: theoretical calculations, and photophysical and electrochemical properties

The fluorescence sensing properties of a naphthalene-based acetohydrazide (3) were investigated. A highly selective “turn-on” response was obtained towards Al3+ ions, and this was used for real sample analysis and development of paper test strips.

Thermodynamic and detailed kinetic study of the formation of orthophthalaldehyde-agmatine complex by fluorescence intensities

The aim of this work is to determine the thermodynamic parameters and the kinetics of complex formation between orthophthalaldehyde (OPA) and agmatine (AGM) in an alkaline medium (pH 13). Firstly, the association constant (Ka) between orthophthalaldehyde and agmatine was determined at different temperatures (between 298 K and 338 K) with a step size of 10 K. Secondly, the thermodynamic parameters such as standard enthalpy (ΔH°), standard entropy (ΔS°),and Gibbs energy (∆G) were calculated, where a positive value of ΔH° (+45.50 kJ/mol) was found, which shows that the reaction is endothermic. In addition, the low value of ΔS°(+0.24 kJ/mol) indicates a slight increase in the disorder in the reaction medium. Furthermore, the negative values of ΔG between −35.62 kJ/mol and −26.02 kJ/mol show that the complex formation process is spontaneous. Finally, the parameters of the kinetics of the reaction between OPA and AGM were determined as follows: when the initial concentration of AGM (5 × 10−6 M) is equal to that of the OPA, the results show that the reaction follows an overall 1.5 order kinetics with an initial rate of 5.1 × 10−7Mmin−1 and a half-life of 8.12 min. The partial order found in relation to the AGM is 0.8. This work shows that the excess of OPA accelerates the formation reaction of the complex.

Furo[3,2-c]coumarin-derived Fe3+ Selective Fluorescence Sensor: Synthesis, Fluorescence Study and Application to Water Analysis

Furocoumarin (furo[3,2-c]coumarin) derivatives have been synthesized from single step, high yielding (82-92%) chemistry involving a 4-hydroxycoumarin 4 + 1 cycloaddition reaction. They are characterized by FTIR, 1H-NMR, and, for the first time, a comprehensive UV-Vis and fluorescence spectroscopy study has been carried out to determine if these compounds can serve as useful sensors. Based on the fluorescence data, the most promising furocoumarin derivative (2-(cyclohexylamino)-3-phenyl-4H-furo[3,2-c]chromen-4-one, FH), exhibits strong fluorescence (ФF = 0.48) with long fluorescence lifetime (5.6 ns) and large Stokes' shift, suggesting FH could be used as a novel fluorescent chemosensor. FH exhibits a highly selective, sensitive and instant turn-off fluorescence response to Fe3+ over other metal ions which was attributed to a charge transfer mechanism. Selectivity was demonstrated against 13 other competing metal ions (Na+, K+, Mg2+, Ca2+, Mn2+, Fe2+, Al3+, Ni2+, Cu2+, Zn2+, Co2+, Pb2+ and Ru3+) and aqueous compatibility was demonstrated in 10% MeOH-H2O solution. The FH sensor coordinates Fe3+ in a 1:2 stoichiometry with a binding constant, Ka = 5.25 × 103 M-1. This novel sensor has a limit of detection of 1.93 µM, below that of the US environmental protection agency guidelines (5.37 µM), with a linear dynamic range of ~28 (~2-30 µM) and an R2 value of 0.9975. As an exemplar application we demonstrate the potential of this sensor for the rapid measurement of Fe3+ in mineral and tap water samples demonstrating the real-world application of FH as a "turn off" fluorescence sensor.

Oxidation-Induced Differentially Selective Turn-On Fluorescence via Photoinduced Electron Transfer Based on a Ferrocene-Appended Coumarin-Quinoline Platform: Application in Cascaded Molecular Logic

Differentially selective molecular sensors that exhibit differential response toward multiple analytes are cost-effective and in high demand for various practical applications. A novel, highly differentially selective electrochemical and fluorescent chemosensor, 5, based on a ferrocene-appended coumarin-quinoline platform has been designed and synthesized. Our designed probe is very specific toward Fe³⁺ via a reversible redox process, whereas it detects Cu²⁺ via irreversible oxidation. Interestingly, it exhibits differential affinity toward the Cu⁺ ion via complexation. High-resolution mass spectrometry, ¹H NMR titration, and IR spectral studies revealed the formation of a bidentate Cu⁺ complex involving an O atom of the amide group attached to the quinoline ring and a N atom of imine unit, and this observation was further supported by quantum-chemical calculations. The metal binding responses were further investigated by UV-vis, fluorescence spectroscopy, and electrochemical analysis. Upon the addition of Fe³⁺ and Cu²⁺ ions, the fluorescence emission of probe 5 shows a "turn-on" signal due to inhibition of the photoinduced electron transfer (PET) process from a donor ferrocene unit to an excited-state fluorophore. The addition of sodium l-ascorbate (LAS) as a reducing agent causes fluorescence "turn off" for the Fe³⁺ ion because of reemergence of the PET process but not for the Cu²⁺ ion because it oxidizes the ferrocene unit to a ferrocenium ion with its concomitant reduction to Cu⁺, which further complexes with 5. Thermodynamic calculations using the Weller equation along with density functional theory calculations validate the feasibility of the PET process. A unique combination of Fe³⁺, LAS, and Cu²⁺ ions has been used to produce a molecular system demonstrating combinational "AND-OR" logic operation.

Photophysical properties and immobilisation of fluorescent pH responsive aminated benzimidazo[1,2-a]quinoline-6-carbonitriles

This work presents a systematic evaluation of 2-amino, 5-amino and 2,5-diamino substituted benzimidazo[1,2-a]quinoline-6-carbonitriles as novel pH probes with a potential application in pH sensing materials or as H⁺ fluoroionophores in bulk optode membranes. The study was carried out by varying the length, type and position of amino substituents in ten fluorescent dyes with the same benzimidazo[1,2-a]quinoline-6-carbonitrile core. The photophysical and acid-base properties of the dyes were investigated by the UV/Vis absorption and fluorescence spectroscopies, and interpreted by the electronic structure DFT calculations. pH sensing mechanisms and structure-property relations affecting the fluorescence response were discussed through a detailed analysis of the piperidine substituted derivatives 1-4. Push-pull donor-acceptor interactions stimulate strong fluorescence in the visible spectral range (up to Φ = 0.65 for 7) and induce significant changes in the photophysical properties associated with the acid-base equilibria (up to a 50-fold increase in the fluorescence intensity). pK_a values in aqueous and mixed solutions (v/v H₂O:EtOH 99:1, 50:50), appear suitable for monitoring acidic pH in solution. The most promising candidates were immobilised in thin polymer matrices by the spin coating technique to form fluorescent sensing materials - optodes, and examined as novel pH-sensitive fluoroionophores. In the liquid membrane environment, dyes exhibited significant increase of the apparent pK_as by almost 4 units. Bright and blue emissive thin films showed pH response and dynamic range around pK_a = 5, making them suitable for a wide range of optical sensing applications.

Combined experimental and theoretical studies on a phenyl thiadiazole-based novel turn-on fluorescent colorimetric Schiff base chemosensor for the selective and sensitive detection of Al3+

A phenyl thiadiazole based receptor (L) has been presented for fluorescent colorimetric detection of Al³⁺ ion with very low detection limit in aqueous medium. The probe L can be applied for logic gate formation, recovery of contaminated water samples and smart-phone based analysis.

A sensitive OFF–ON–OFF fluorescent probe for the cascade sensing of Al3+ and F− ions in aqueous media and living cells

A simple Schiff-base ligand 2-hydroxy-1-naphthaldehyde semicarbazone (HNS) was synthesized and characterized. Based on the combined effect of inhibition of CH Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N isomerization and chelation-enhanced fluorescence (CHEF), HNS functions as a fluorescence “turn on” sensor for Al³⁺ in buffered aqueous media. Based on the strong affinity of Al³⁺ to F⁻ ions, the in situ generated Al³⁺–HNS complex can also be utilized as an effective chemosensor for F⁻ sensing by metal displacement approach, ensuing quenching of fluorescence by the reversible return of HNS from Al³⁺–HNS complex. Thus a method using a single probe for the detection of both Al³⁺ and F⁻ ions is developed. The system exhibits high selectivity and sensitivity for Al³⁺ and F⁻ ions and the detection limits were found to be as low as 6.75 × 10⁻⁸ M and 7.89 × 10⁻⁷ M, respectively. Furthermore, the practical applicability of this probe has been examined in living cells.

A simple Schiff-base ligand 2-hydroxy-1-naphthaldehyde semicarbazone (HNS) was synthesized and applied to the sequential sensing of Al³⁺ and F⁻ ions in aqueous media and live cells.

Theoretical Design of Near-Infrared Al3+ Fluorescent Probes Based on Salicylaldehyde Acylhydrazone Schiff Base Derivatives

The aim of this paper is to design near-infrared (NIR) Al³⁺ fluorescent probes based on a Schiff base to extend their applications in biological systems. By combining benzo[h]quinoline unit and salicylaldehyde acylhydrazone, we designed two new Schiff base derivatives. According to theoretical simulations on previous experimental Al³⁺ probes, we obtained the appropriate theoretical approaches to describe the properties of these fluorescent probes. By employing such approaches on our newly designed molecules, it is found that the new molecules have high selectivity toward Al³⁺ and that their corresponding Al³⁺ complexes can emit NIR fluorescence. As a result, they are expected to be potential NIR Al³⁺ fluorescent probes.

Aggregation-Induced Emission-Active Hydrazide-Based Probe: Selective Sensing of Al3+, HF2 -, and Nitro Explosives

(E)-N'-((2-Hydroxynaphthalen-1-yl)methylene)picolinohydrazide (H-PNAP) shows aggregation-induced emission (AIE) strictly in a 90% water/MeOH (v/v) mixture at 540 nm, and the solid-state emission is blue-shifted to 509 nm upon excitation at 400 nm. The AIE activity of H-PNAP is selectively quenched by 2,4,6-trinitrophenol (TNP) and 2,4-dinitrophenol (DNP) out of different nitroaromatic compounds with a limit of detection (LOD) of 7.79 × 10-7 and 9.08 × 10-7 M, respectively. The probe is nonemissive in aqueous medium (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, HEPES buffer, pH 7.2); however, it shows a strong emission to Al3+ (λem, 490 nm) in the presence of 17 other biological metal ions, and the LOD is 2.09 nM which is far below the WHO recommended value (7.41 mM). The emission of the [Al(PNAP)(NO3)2] complex is quenched by HF2 - (F- and PO4 3- are weak quencher), and the LOD is as low as 15 nM. The probable mechanism of the sensing feature of the probe has been authenticated by 1H nuclear magnetic resonance titration, mass spectrometry, Fourier transform infrared spectroscopy, Benesi-Hildebrand plot, and Job's plot in each case. The probe has some practical applications such as recovery of Al3+ from the drinking water sample, construction of the INHIBIT logic gate, and detection kits for Al3+ and TNP/DNP by simple paper test strips. The probe, H-PNAP, has successfully been applied to the detection of intracellular Al3+ and HF2 - ions in the human breast cancer cell, MDA-MB-468.

Ultrasensitive Optical Chemosensor for Cu(II) Detection

Herein, the main objective of this research is to design and synthesize a novel optical chemosensor, 2,6-Bis(4-dimethylaminophenyl)-4-(dicyanomethylene)-cyclohexane-1,1-dicarbo-nitrile (BDC), for detection of one of the most significant metal ions Cu(II). This novel fluorescent chemosensor exhibits unique optical properties with large Stokes shift (about 170 nm) approximately. The fluorescence and UV–vis absorption performance among the BDC probe and Cu(II) ions were examined in 1:9 (v/v) methanol–HEPES buffer (pH = 7.2) solution. Also, BDC displays high selectivity for Cu(II) concerning other cations. Moreover, this probe provides high selectivity and sensitivity based on their fluorescence properties and recognition abilities within a detection limit of the Cu(II) contents (LOD 2.3 x 10⁻⁷ M). The suggested mechanism of BDC sensor is attributed to the chelation process with Cu(II), to establish a 1:1 metal-ligand ratio complex with a binding constant (K_bind = 7.16 x 10⁴ M⁻¹). The detection process is accompanied by quenching the main emission peak of the BDC at 571 nm. All the experimental data were collected to investigate the effects of several important parameters such as reversibility and the concentration limits. Besides, we study the interference of various metal ions on selectivity and detection capacity of this significant Cu (II) ion. This novel chemosensor shows ultrasensitive, fast tracing of Cu(II) in the physiological pH range (pH 7.2) and therefore may propose a novel promising method for the investigation of the biological functions of Cu(II) in living cells.

A novel OFF-ON-OFF fluorescence probe based on coumarin for Al3+ and F- detection and bioimaging in living cells

A novel fluorescence probe L2 based on coumarin has been designed and synthesized. The probe L2 can be used for relay recognition of metal ions Al³⁺ and anion F^- in the aqueous HEPES buffer (0.05 M, pH = 7.4), and build a OFF-ON-OFF detection system. The probe showed high selectivity and sensitivity to target ions in the process of relay recognition, and the corresponding detection limit could be as low as 0.014 μM (Al³⁺) and 0.03 μM (F^-). Besides, the geometry optimizations of probe L2 and [L2 + Al³⁺] complex were carried out using the Gaussian 16 program based on DFT, and the identification mechanism of the probe was also discussed by the mass spectrometry and theoretical calculations. Moreover, the probe has also been successfully applied to detection of target ions in living cells.

A fluorescent dansyl-based peptide probe for highly selective and sensitive detect Cd2+ ions and its application in living cell imaging

We reported a novel and readily synthesized fluorescent "turn-on" probe L (Dansyl-Glu-Pro-Gly-Cys) based on dansyl group combine tetrapeptide. The probe L exhibited highly sensitive fluorescent recognition to Cd²⁺ ions in HEPES buffer solutions (10.0 mM, pH 7.4). The 2:1 binding stoichiometry of L with Cd²⁺ were determined based on fluorescence titration and the Job's plot investigation. The competitive experiments were found to be highly selective for the Cd²⁺ ions even in the existence of excess competing metal ions including Zn²⁺, Pb²⁺, Hg²⁺ and Cu²⁺ ions. The binding constant of the complex L-Cd was calculated to be 5.18 × 10¹⁰ M^-2, and showed great affinity compared to other probes. In addition, the detection limit of the probe L for Cd²⁺ ions was calculated to be 45 nM, which presented a pronounced sensitivity toward Cd²⁺ ions. Most importantly, the probe L had wide range of pH and good biocompatibility, and were successfully applied to selectively detected Cd²⁺ ions within pH range of 7-12 and bioimaging studies in live cells.

A highly selective and sensitive ESIPT-based coumarin–triazole polymer for the ratiometric detection of Hg2+

A reversible ESIPT based system for the detection of Hg²⁺ was developed. The system exhibited better properties compared to that of recently developed ratiometric fluorescent systems.

Design of a coumarinyl-picolinoyl hydrazide Schiff base for the fluorescence turn-on–off sequential sensing of Al3+ and nitroaromatics, and electronic device fabrication

Designing a small organic molecule for fluorescence sensing and electrical conductivity is a challenging task.

Novel chemical sensor for detection Ca(II) ions based on ferutinin

A new optical chemical sensor based on medicinal compound, jaeschkeanadiol p-hydroxyben-zoate (Ferutinin), has been designed and utilized for Ca(II) ions detections. This natural optical sensor exhibits immense selectivity including fluorescence and absorption ratiometric for Ca(II) ions within precious physiological pH range. Further, the chelation process of the Ca(II) ions with the medicinal optical sensor ferutinin yields a 1:1 (metal: ligand) complex which is accompanied by fluorescence enhancement of the main emission band centered at 355 nm of the medicinal probe. The fluorescence "turn-on" effect is a clear evidence for the chelation process between ferutinin medicinal probe and Ca(II) ions and this could be simply detected. The new sensor was proposed depending on significant fluorescence mechanism, (MLCT, metal-ligand charge transfer). However, the interaction of the medicinal optical sensor with Ca(II) in presence of other cations was examined without any significant interference. Also, the new developed optical sensor consecutively exhibits low limit of detection (LOD) 1.5 nM for Ca(II) which is detected in very significant physiological pH range (pH = 7.4). Also, the probe provides high binding affinity towards Ca(II) with large binding constant K_b 5.97 × 10⁴ M^-1. As a result, this optical sensor may apply for detection Ca(II) in cell or biological samples.

High selective and sensitive detection of Zn(II) using tetrapeptide-based dansyl fluorescent chemosensor and its application in cell imaging

The zinc ions (Zn²⁺) play extremely irreplaceable role in the organism and the environment, the design and synthesis of a biomolecule-based fluorescence chemosensor for the detection of Zn²⁺ with high sensitivity is very important. Herein, a novel tetrapeptide-based dansyl fluorescent "turn-on" response chemosensor (L) has been designed and synthesized by solid phase peptide synthesis (SPPS). As designed, L can detect Zn²⁺ ions with specifically and sensitively based on photo-induced electron transfer (PET) mechanism in 100% aqueous solutions, and other metal ions do not interfere with Zn²⁺ ions recognition. The stoichiometric ratio of L with Zn²⁺ ions was 2:1, which matches with fluorescence titration and Job-plot assay. In addition, the reversibility and circularly process of the detection of L was confirmed by adding bonding agent Na₂EDTA. Moreover, L exhibits excellent biocompatibility and low biotoxicity with the limit of detection (LOD) for Zn²⁺ about 18 nM, and has been successfully utilized for fluorescence imaging of Zn²⁺ ions in living HeLa cells under physiological conditions.

Highly sensitive oligothiophene-phenylamine-based dual-functional fluorescence "turn-on" sensor for rapid and simultaneous detection of Al3+ and Fe3+ in environment and food samples

Developing low-cost and efficient sensors for rapid, selective and sensitive detection of the transition metal ions in environmental and food science is very important. In this study, a novel dual-functional fluorescent "turn-on" sensor 3TP based on oligothiophene-phenylamine Schiff base has been synthesized for discrimination and simultaneous detection of both Al³⁺ and Fe³⁺ ions with high selectivity and anti-interference over other metal ions. Sensor 3TP displayed a very fast fluorescence-enhanced response towards Al³⁺ and Fe³⁺ ions with low detection limits (0.177μM for Al³⁺ and 0.172μM for Fe³⁺) and wide pH response range (4.0-12.0). The Al³⁺/Fe³⁺ sensing mechanisms were investigated by fluorescence experiments, ¹H NMR titrations, FT-IR and ESI-MS spectra. Importantly, sensor 3TP was served as an efficient solid material for the highly sensitive and selective detection of Fe³⁺ on TLC plates. Moreover, the sensor 3TP has been successfully used to detect trace Al³⁺ and Fe³⁺ in environment and food samples with satisfactory results and good recoveries, revealing a convenient, reliable and accurate method for Al³⁺ and Fe³⁺ analysis in real samples.

A highly selective and sensitive turn-on probe for aluminum(III) based on quinoline Schiff's base and its cell imaging

A reversible Schiff's base fluorescence probe for Al³⁺, (3,5-dichloro-2- hydroxybenzylidene) quinoline-2-carbohydrazide (QC), based on quinoline derivative has been designed, synthesized and evaluated. The QC exhibited a high sensitivity and selectivity toward Al³⁺ in EtOH-H₂O (v/v=1:9, pH=6) by forming a 1:1 complex with Al³⁺ and the detection limit of QC for Al³⁺ was as low as 0.012μM. Furthermore, these results displayed that the binding of QCAl³⁺ was broken by F^-, so this system could be used to monitor F^- in the future. The enhancement fluorescence of the QC could be attributed to the inhibition of PET and ESIPT and the emergency of CHEF process induced by Al³⁺. More importantly, QC was not only successfully used for the determination of trace Al³⁺ in the tap water and the human blood serum, but was valid for fluorescence imaging of Al³⁺ in the Hela cells.

Acylhydrazone as a novel “Off–On–Off” fluorescence probe for the sequential detection of Al3+and F−

An acylhydrazone,SPBH,acts as a sequential fluorescence “Off–On–Off” probe for Al³⁺/F⁻, and the phenomenon was detectable by the naked eye.

A new fluorescent and colorimetric chemosensor for Al3+ and F−/CN− based on a julolidine unit and its bioimaging in living cells

A novel multifunctional chemosensor HL bearing a julolidine unit and a Schiff base unit has been synthesized. As a fluorescent sensor, HL exhibited excellent selectivity and high sensitivity to Al³⁺ and F⁻/CN⁻ with a low detection limit in acetonitrile. Moreover, HL also showed good colorimetric selectivity to F⁻/CN⁻; a solution color change from colorless to light yellow in acetonitrile was observed by the ‘naked-eye’. The properties of HL with Al³⁺ and F⁻/CN⁻ were studied by UV-vis absorption spectroscopy, fluorescence spectroscopy, high-resolution mass spectrometry and ¹H NMR titration. Furthermore, the cell imaging experimental results indicated that the chemosensor HL could be applied for the detection of Al³⁺ in living cells.

A novel multifunctional chemosensor HL bearing a julolidine unit and a Schiff base unit has been synthesized.

A new 2-(2'-hydroxyphenyl)quinazolin-4(3H)-one derived acylhydrazone for fluorescence recognition of Al3

A new 2-(2'-hydroxyphenyl)quinazolin-4(3H)-one derived acylhydrazone (QP) was designed and synthesized as a fluorescent sensor. In Tris∙HCl buffer (10mM, pH7.4)/ethanol (1/9, v/v) solution, QP exhibits a highly selective fluorescence response to Al³⁺ over other metal ions with a significant blue-shifted and enhanced emission at 473nm. QP interacts with Al³⁺ reversibly through a 1:2 binding ratio with a detection limit of 4.79×10^-8M. Potential applicability of QP for Al³⁺ detection in tap and lake water samples were also examined by 'proof-of-concept' experiments.

A highly sensitive fluorescent chemosensor for selective detection of zinc (II) ion based on the oxadiazole derivative

A novel fluorescent chemosensor based on the oxadiazole, 2-(2-hydroxyphenyl)-5-(4-methoxyphenyl)-1,3,4-oxadiazole, was designed and synthesized. The interaction of the oxadiazole with different metal ions had been investigated through UV-vis absorption and fluorescence spectra in 9:1 (v/v) ethanol-water (pH=7.0) solution. The oxadiazole showed a pronounced fluorescence enhancement at 430nm upon addition of Zn²⁺ in aqueous solution, whereas it had no apparent interference from other metal ions. The results indicated that the oxadiazole possessed high selectivity and sensitivity to Zn²⁺ ion. The stoichiometric ratio between the oxadiazole and Zn²⁺ ion was calculated to be 2:1 by Job plot experiment, meanwhile their binding modes was confirmed by ¹H NMR and mass spectrometry. Their association constant was determined to be 1.95×10⁵M^-1 and the detection limit for Zn²⁺ ion was 6.14×10^-7mol/L.