A new hydroxynaphthyl benzothiazole derived fluorescent probe for highly selective and sensitive Cu(2+) detection

Review on Synthesis of 2-(2-Hydroxyaryl) Benzothiazoles (HBT) for Excited-State Intra-molecular Proton Transfer (ESIPT)-Based Detection of Ions and Biomolecules

In this review, we present a systematic and comprehensive summary of the recent developments in the synthetic strategies of 2-(2-hydroxyarylsubstituted)-benzothiazole (HBT) framework along with incorporation of various substituents on phenolic and benzothiazole rings which affect the emission process. The literature, spanning the years 2015-2024, on excited-state intramolecular proton transfer (ESIPT)-based studies of HBT derivatives comprising the effects of solvent polarity, substituents, and extended conjugation on fluorophores has been searched. ESIPT, intramolecular charge transfer, and aggregation-induced emissions enable these fluorescent probes to specifically interact with analytes, thereby altering their luminescence characteristics to achieve analyte detection. These fluorescent probes exhibit large Stokes shifts, high quantum yields, and excellent color transitions. Finally, the applications of HBTs as ESIPT-based fluorescent probes for the detection of cations, anions, and biomolecules have been summarized. We anticipate that this review will provide a comprehensive overview of the current state of research in this field and encourage researchers to develop novel ESIPT-based fluorophores with new applications.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

A Reaction-based Ratiometric Fluorescent Probe with Large STOKES Shift for Cu2+ in Neat Aqueous Solution

A novel reaction-based ratiometric fluorescent probe 1 for Cu2+ using picolinate as the reaction site and hemicyanine as the fluorophore was developed. 1 displayed maximum absorption peak at 355 nm and fluorescence emission peak at 500 nm, with large Stokes shift of 145 nm. Upon reaction with Cu2+, the maximum absorption and fluorescence emission peaks red-shifted to 390 nm and 570 nm respectively, owing to Cu2+-induced hydrolysis of the picolinate moiety in 1. Meanwhile, the solution of 1 turned from green to orange under a 365 nm UV lamp. 1 not only could detect Cu2+ ratiometrically by the ratios of both absorbance (A390 nm/A355 nm) and fluorescence intensity (F570 nm/F500 nm), but also displayed large Stokes shift, fast response, high sensitivity and excellent selectivity over other metal ions in neat aqueous solution.

Development in Fluorescent OFF-ON Probes Based on Cu2+ Promoted Hydrolysis Reaction of the Picolinate Moiety

Anions and cations have a key role in our normal life. Cu²⁺ ion is a crucial trace element accountable for the part of several cellular enzymes and proteins, including cytochrome c oxidase, dopamine monooxygenase, Cu/Zn superoxide dismutase, and ceruloplasmin. WHO has found the extreme acceptable level of Cu²⁺ ions in drinking water is up to 2.0 ppm. Excess use of Cu²⁺ ions is associated with various human genetic disorders. Thus, the visualization of Cu²⁺ ions to avoid its toxic effects in chemical and biological systems is significant. In this review we have summarized sensors based on catalytic hydrolysis of picolinate to detect Cu²⁺ ions. The sensors based on hydrolysis of picolinate are very selective as compared to the other sensors for Cu²⁺ ions detection. We have focused on describing the structure, spectral properties, detection limits, and bioimaging model of the sensors.

Luminescent Covalent Organic Frameworks for Biosensing and Bioimaging Applications

Luminescent covalent organic frameworks (LCOFs) have attracted significant attention due to their tunability of structures and photophysical properties at molecular level. LCOFs are built to highly ordered and periodic 2D or 3D framework structures through covalently assembling with various luminophore building blocks. Recently, the advantages of LCOFs including predesigned properties of structure, unique photoluminescence, hypotoxicity and good biocompatibility and tumor penetration, broaden their applications in biorelated fields, such as biosensing, bioimaging, and drug delivery. A specific review that analyses the advances of LCOFs in the field of biosensing and bioimaging is thus urged to emerge. Here the construction of LCOFs is reviewed first. The synthetic chemistry of LCOFs highlights the key role of chemical linkages, which not only concrete the building blocks but also affect the optical properties and even can act as the responsive sites for potential sensing applications. How to brighten LCOFs are clarified through description of structure managements. The ability to utilize the luminescence of LCOFs for applications in biosensing and bioimaging is discussed using state-of-the-art examples of varied practical goals. A prospect finally addresses opportunities and challenges the development of LCOFs facing from chemistry, physics to the applications, according to their current progress.

Development of a method for the detection of Cu2+ in the environment and live cells using a synthesized spider web-like fluorescent probe

A macrocyclic Schiff base fluorescent probe [1,2-phenylenediamine-2,6-pyridinedialdehyde macrocyclic Schiff base] (BP-MSB) based on 2,6-pyridinedialdehyde was synthesized for use in the detection of Cu²⁺ in environmental water samples and live cells imaging by the method of specific recognition. The free fluorescent probe BP-MSB shows strong fluorescence in DMSO/H₂O. The probe shows high sensitivity and selectivity for Cu²⁺ through "turn-off" fluorescence response in DMSO/H₂O buffer solution (pH = 6.5), with a detection limit of 0.83 nM, which is far below the maximum allowable drinking water content of 20.0 μM specified by the US Environmental Protection Agency. The BP-MSB fluorescence quenching method was used for the determination of Cu²⁺ in Xiang Jiang water samples and tap-water. Furthermore, addition of the same number of moles of ethylene diamine tetraacetic acid (EDTA) can realize the reversible recognition of Cu²⁺ by the probe BP-MSB. Most importantly, the fluorescence imaging of live cells after incubation of BP-MSB with GM12878 cells showed good imaging performance, confirming the sensitivity of the fluorescent probe BP-MSB in vivo. The probe was also used to form an analog logic gate. This probe has the advantages of good stability, simple operation and high selectivity, which provides a broad prospect for environmental monitoring, intracellular detection and practical application of POCT.

A novel AIE fluorescent probe based on myrtenal for Cu2+ detection in a near-perfect aqueous medium and bioimaging in vegetables and zebrafish

An AIE-active fluorescent probe MHTS with good sensitivity and selectivity for the detection of Cu2+ was synthesized from myrtenal.

A highly selective fluorescent probe for the sensing of Cu2+ based on the hydrolysis of a quinoline-2-carboxylate and its application in cell imaging

A highly selective OFF–ON fluorescent probe is developed for the sensing of Cu2+ based on the hydrolysis of a quinoline-2-carboxylate moiety. The probe is weakly fluorescent due to esterification of the phenolic group. Upon treatment with 1 equiv. of Cu2+, the probe exhibits strong fluorescence at 570 nm. The probe also exhibits high selectivity for Cu2+ over other cations with a low detection limit of 0.2 μM, which is sensitive enough to meet the standard of the World Health Organization for Cu2+ in drinking water (30 μM). Moreover, the probe shows a very low cell cytotoxicity, and imaging experiments demonstrate that the probe can be used for the sensing of Cu2+ in living cells.

γ-Aminobutyric acid-modified graphene oxide as a highly selective and low-toxic fluorescent nanoprobe for relay recognition of copper(II) and cysteine

A sensitive and selective graphene oxide (GO)-based fluorescent nanoprobe has been developed for the relay recognition of Cu²⁺ and cysteine (Cys) by covalently grafting γ-aminobutyric acid (GABA) onto GO. The fluorescence of the probe (with excitation/emission maxima at 360/445 nm) is selectively quenched by Cu²⁺ via static fluorescence quenching. Fluorescence drops linearly as the concentration of Cu²⁺ is increased from 50 nM to 1.0 µM, and the detection limit for Cu²⁺ is calculated as 15 nM. By virtue of the strong interaction between Cys and Cu²⁺, the GO-GABA/Cu²⁺ complex can further sensitively recognize Cys in a "switch-on" mode. The linear range for Cys detection is from 50 nM to 1.0 µM, and the detection limit is 38 nM. The probe has low cytotoxicity, and it works well inside living cells, which is verified by the successful application in imaging of LLC-PK1 cells. Graphical abstract Gamma-Aminobutyric Acid (GABA) modified graphene oxide (GO) is a highly selective nanoprobe for the fluorometric relay recognition of Cu²⁺ and Cys.

A Highly Selective and Sensitive Colorimetric Probe for Cu2+ Determination in Aqueous Media Based on Derivative of Tryptanthrin

A new colorimetric probe, based on tryptanthrin derivative (TR-A), has been successfully synthesized. The probe shows good selectivity and sensitivity for Cu²⁺ over 12 competing metal ions in a 10 mM Tris-HCl buffer solution (pH 5.5). A significant peak at 623nm appears in the UV-Vis absorption of TR-A-Cu²⁺, and a noteworthy color change is observed with the naked eye from aquamarine blue to light orange. The interaction of TR-A and Cu²⁺ are proven to form a 1:1 binding stoichiometry; this identifying is expected to be completed within 1 min. The probe with a limit of detection (16 nM, R² = 0.9934) shows excellent potential to determine Cu²⁺ in analysis systems.

Colorimetric and fluorescent probes for real-time naked eye sensing of copper ion in solution and on paper substrate

In this paper, BT ((E)-2-(4-(4-(bis(pyridin-2-ylmethyl)amino)styryl)-3-cyano-5,5-dimethylfuran-2(5H)-ylidene)malononitrile) with strong donor-π-acceptor structure was synthesized, which showed both colorimetric and fluorescent sensing ability toward Cu²⁺ with high selectivity and sensitivity. Job plot and mass spectra measurement revealed a 1 : 1 coordination mode between Cu²⁺ and probe BT in ethanol/HEPES (1 : 4 v/v) buffer (pH 7.2) solution, and the binding constant was calculated to be 3.6 × 10⁴ M^-1. The colour of BT solution (10 µM) immediately turned from purple red to yellow and the red fluorescence was quenched obviously when a certain amount of Cu²⁺ was added, which enabled a dual-channel detection of Cu²⁺. A paper strip pre-stained with BT solution was further fabricated and it also showed excellent sensing ability toward Cu²⁺ with a detection limit as low as 10^-6 M with the naked eye, which represents better portability and operation simplicity that is favourable for on-site analysis of Cu²⁺ in water.

A cancer cell-specific fluorescent probe for imaging Cu2+ in living cancer cells

Monitoring copper level in cancer cells is important for the further understanding of its roles in the cell proliferation, and also could afford novel copper-based strategy for the cancer therapy. Herein, we have developed a novel cancer cell-specific fluorescent probe for the detecting Cu²⁺ in living cancer cells. The probe employed biotin as the cancer cell-specific group. Before the treatment of Cu²⁺, the probe showed nearly no fluorescence. However, the probe can display strong fluorescence at 581nm in response to Cu²⁺. The probe exhibited excellent sensitivity and high selectivity for Cu²⁺ over the other relative species. Under the guidance of biotin group, could be successfully used for detecting Cu²⁺ in living cancer cells. We expect that this design strategy could be further applied for detection of the other important biomolecules in living cancer cells.

A highly selective and sensitive rhodamine-derived fluorescent probe for detection of Cu2

A novel water-soluble and reversible fluorescent probe was designed and synthesized based on a rhodamine B derivative. It was used for detection of Cu²⁺ in drinking water and in living cells with high sensitivity and excellent selectivity. The tested concentration range and the limit of detection (LOD) of the probe were 0-15.00μmolL^-1 and 0.085μmolL^-1, respectively. In addition, the mode of binding and mechanism of interaction between the probe and Cu²⁺ were analyzed by density functional theory (DFT) calculations.