Novel rhodamine Schiff base type naked-eye fluorescent probe for sensing Fe3+ and the application in cell

Rapid, Sensitive, and Selective "ON-OFF" Detection of Fe3+ Ions Using Novel Acetalophanes and Their Applications in Real Samples

Three novel acetalophanes 1a-c have been designed, synthesized and characterized. The receptors 1b-c, featuring bulky anthracene groups, displayed significant selectivity for Fe3+ ions, resulting in a turn-off fluorescence mode in a DMF-buffer solution. Conversely, the non-steric probe 1a could serve as a versatile sensor for the simultaneous detection of Fe3+ and Cu2+ ions in MeOH-buffer solution. The sensing mechanism for the capability of 1a was demonstrated to be different, as evidenced by the addition of cyanide ions. The probes with Fe3+ exhibited a sensing mechanism that resulted in the deprotection of acetals to the corresponding starting materials, as confirmed by 1H NMR, IR spectra and TLC analysis. The attractive features of these practical and efficient sensors are selectivity, sensitivity (limit of detection = 0.15 µM by 1a, 0.16 µM by 1b and 0.14 µM by 1c), rapid response (less than 5 s). The on-site monitoring of various real samples, including well water, apricot, and green tea, proved to be successful for the quantitative and cost-effective detection of Fe3+. The method demonstrated good precision, even in the presence of other interfering materials.

Study of a Fluorescent System Based on the Naphthalene Derivative Fluorescent Probe Bound to Al3

The naphthalene derivative fluorescent probe F6 was synthesized and a 1 × 10^-3 mol/L solution of Al³⁺ and other metals to be tested was prepared for the subsequent experiments. The Al³⁺ fluorescence system of the naphthalene derivative fluorescent probe F6 was successfully constructed as demonstrated by fluorescence emission spectroscopy. The optimal time, temperature and pH of the reaction were investigated. The selectivity and anti-interference ability of the probe F6 for Al³⁺ were investigated by fluorescence spectroscopy in a methanol solution. The experiments showed that the probe has high selectivity and anti-interference ability for Al³⁺. The binding ratio of F6 to Al³⁺ was 2:1, and the binding constant was calculated to be 1.598 × 10⁵ M^-1. The possible mechanism of the binding of the two was speculated. Different concentrations of Al³⁺ were added to Panax Quinquefolium and Paeoniae Radix Alba. The results showed that the recoveries of Al³⁺ were 99.75-100.56% and 98.67-99.67%, respectively. The detection limit was 8.73 × 10^-8 mol/L. The experiments demonstrated that the formed fluorescence system can be successfully adapted for the determination of Al³⁺ content in two Chinese herbal medicines, which has good practical application.

Oxadiazole Schiff Base as Fe3+ Ion Chemosensor: "Turn-off" Fluorescent, Biological and Computational Studies

Compound, (E)-5-(4-((thiophen-2-ylmethylene)amino)phenyl)-1,3,4-oxadiazole-2-thiol (3) was synthesized via condensation reaction of 5-(4-aminophenyl)-1,3,4-oxadiazole-2-thiol with thiophene-2-carbaldehyde in ethanol. For the synthesis and structural confirmation the FT-IR, ¹H, ¹³C-NMR, UV-visible spectroscopy, and mass spectrometry were carried out. The long-term stability of the probe (3) was validated by the experimental as well as theoretical studies. The sensing behaviour of the compound 3 was monitored with various metal ions (Ca²⁺, Cr³⁺, Fe³⁺, Co²⁺, Mg²⁺, Na⁺, Ni²⁺, K⁺) using UV- Vis. and fluorescence spectroscopy techniques by various methods (effect of pH and density functional theory) which showing the most potent sensing behaviour with iron. Job's plot analysis confirmed the binding stoichiometry ratio 1:1 of Fe³⁺ ion and compound 3. The limit of detection (LOD), the limit of quantification (LOQ), and association constant (K_a) were calculated as 0.113 µM, 0.375 µM, and 5.226 × 10⁵ respectively. The sensing behavior was further confirmed through spectroscopic techniques (FT-IR and ¹H-NMR) and DFT calculations. The intercalative mode of binding of oxadiazole derivative 3 with Ct-DNA was supported through UV-Vis spectroscopy, fluorescence spectroscopy, viscosity, cyclic voltammetry, and circular dichroism measurements. The binding constant, Gibb's free energy, and stern-volmer constant were find out as 1.24 × 10⁵, -29.057 kJ/mol, and 1.82 × 10⁵ respectively. The cleavage activity of pBR322 plasmid DNA was also observed at 3 × 10^-5 M concentration of compound 3. The computational binding score through molecular docking study was obtained as -7.4 kcal/mol. Additionally, the antifungal activity for compound 3 was also screened using broth dilution and disc diffusion method against C. albicans strain. The synthesized compound 3 showed good potential scavenging antioxidant activity against DPPH and H₂O₂ free radicals.

A novel highly selective FRET sensor for Fe(III) and DFT mechanistic evaluation

A novel FRET-based sensor has been designed and developed through the conjugation of naphthyl and rhodamine via propylamine spacer, Naph-Rh. The naphthyl moiety serves as a FRET donor due to its emission spectrum overlapping with the rhodamine B absorption band. Naph-Rh exhibited a selectivity for sensing Fe³⁺ over other metal ions with a visual color change and fluorescent enhancement. The ratio of the Naph-Rh and Fe³⁺ was determined to be 1:1 based on Job's plot analysis with a detection limit of 83 nM. The probe exhibited a linear response to Fe³⁺ in the range of 0-120 μM. Furthermore, the density functional theory (DFT) calculations of Naph-Rh were carried out to rationalize the design and portray the plausible Fe³⁺ sensing mechanism.

Hydrothermal synthesis of two-dimensional cadmium(II) micro-porous coordination material based on Bi-functional building block and its application in highly sensitive detection of Fe3+ and Cr2O72

Metal-organic framework (MOFs), also known as porous coordination polymers (PCPs), is a new kind of crystalline porous materials, which has received extensive attention in the past few decades. As a new type of sensing material, MOFs stand out from many other traditional fluorescence sensors because of its crystal characteristics, structural diversity, stable porosity and adjustable functional characteristics. In this work, the bi-functional building block containing aromatic carboxylic acid and triazole moieties, namely 3-(1H-1,3,4-triazol-1-yl) benzoic acid, was selected as the linker to synthesize {[Cd(µ₅-L)⋅I}_n (1, HL = 3-(1H-1,3,4-triazol-1-yl)benzoic acid) by hydrothermal method with transition Cd^II metal centers. Firstly, the preliminary characterization of 1 was carried out by means of PXRD, FT-IR, and then the UV and fluorescence tests were conducted to study the fluorescence properties of 1. The crystal structure analysis indicates that Cd^II is the center and the ligand is bridged to form a two-dimensional porous structure. In addition, 1 has good selectivity for Fe³⁺ and Cr₂O₇^2-, meanwhile, it has high detection sensitivity (K_sv quenching efficiency for Fe³⁺: 1.2 × 10⁴ M^-1 and Cr₂O₇^2- 1.85 × 10⁴ M^-1) and low detection limit (Fe³⁺: 19.21 μM and Cr₂O₇^2-: 12.46 μM). The results of photoluminescence test show that 1 can detect cations and anions with high sensitivity, resist the interference of other ions, and have good reusability. As far as we know, 1 is the first example of ultra-stable two-dimensional (2D) Cadmium (II) microporous coordination material as a fluorescence sensor for Fe³⁺ and Cr₂O₇^2-.

Sulfonate substituted rhodamine hydrophilic fluorescent probes: Application to specific detection of Fe3+ and imaging in living fish

Two Sulfonate substituted rhodamine hydrophilic fluorescent probes RbS1 and RbS2 were designed and synthesized for specific detection of Fe³⁺. It was found that the probe RbS2 was stronger than RbS1 in the water solubility test. Both of them displayed responses to Fe³⁺ with a apparent fluorescence enhancement at 585 nm, accompanied with a distinct fluorescence change to pink. Upon addition of Fe³⁺ ions (0-16 μM), the emission intensity of RbS1 and RbS2 increased to 40 and 70 fold, which exhibited a good linear relationship with the concentration of Fe³⁺. The detection limits of RbS1 and RbS2 for sensing Fe³⁺ were 0.64 μM and 0.56 μM, respectively. The binding ratios of the RbS1 and RbS2 to Fe³⁺ were 1:1 and the recycling ability for Fe³⁺ was reasonable. RbS1 and RbS2 have been successfully applied to the determination of Fe³⁺ in real water samples with satisfactory recovery and accuracy. In further living fish imaging test, the probe RbS2 was distributed into abdomen, which exhibited better fluorescence imaging ability than that of RbS1.

Reaction-based highly selective and sensitive monomer/polymer probes with Schiff base groups for the detection of Hg2+ and Fe3+ ions

It is urgent and important to detect heavy metals in environments. In this work, novel reaction-based fluorescent probes were obtained by Schiff base reaction. The probes with Schiff base moiety (-C=N-) undergo irreversible hydrolysis in the presence of Hg²⁺ and Fe³⁺. They exhibit perfect high selectivity and sensitivity to Hg²⁺and Fe³⁺ ions. Upon the addition of Hg²⁺and Fe³⁺, fluorescence intensity of the probes increased notably. And the color of the probe changes from brown to bright green under UV light, which can realize "naked eye" detection. In addition, Schiff base group was introduced into polyurethane chain through condensation polymerization reaction. As expected, the fluorescent polyurethane probe (P2) maintained the detection performance of its original small molecules (BSD). Even more P2 showed a more sensitive detection effect than BSD, and the detection limits of P2 for Hg²⁺ and Fe³⁺ reach 0.19 μM and 0.21 μM, respectively. It indicates that Reaction-based probes could be a useful tool for the detection of Hg²⁺ and Fe³⁺.

Novel rhodamine probe for colorimetric and fluorescent detection of Fe3+ ions in aqueous media with cellular imaging

A novel rhodamine-pyridine conjugated spectroscopic probe RhP was synthesized and its X-ray single crystalline properties were revealed with tabulation. The RhP displayed a distinct pale-pink colorimetric and "turn-on" fluorescent response to Fe³⁺ in aqueous media [H₂O:DMSO (95:5, v/v)] than that of other interfering ions. During the Fe³⁺ recognition, the absorption (UV-Vis) and photoluminescence (PL) spectral studies revealed new peaks at 561 and 592 nm, respectively. The 1:1 stoichiometry and binding sites were verified by Job's plot, ESI-mass, and ¹H NMR titrations. Subsequently, LOD and binding constant for RhP + Fe³⁺ complex were estimated as 102.3 nM and 6.265 × 10⁴ M^-1 from linear fitting and Benesi-Hildebrand plots, correspondingly. Sensor reversibility of RhP + Fe³⁺ by EDTA was demonstrated by UV/PL and TRPL investigations. Moreover, the photoinduced energy transfer mechanism and band gap changes were established from the DFT interrogations. Lastly, cellular imaging studies were carried out to authenticate the real applicability of RhP in Fe³⁺ detection.

Some new nanostructure zinc complex: Synthesis, spectral analyses, crystal structure, Hirshfeld surface analyses, antimicrobial/anticancer, thermal behavior and usage as precursor for ZnO nanostructure

In this work, a new tridentate ligand, its some novel zinc halide/pseudohalide complexes and their antimicrobial and cytotoxic effects of them are described. Characterization data of these compounds have been achieved via several physical and micro analytical techniques. As typical one, X-ray crystal structure analysis of zinc azide complex was run showing zinc center is penta-coordinated by three nitrogen atoms from Schiff base ligand and two terminal azide nitrogen atoms as a distorted square pyramidal geometry. Hirshfeld surfaces analysis clears the important role of interactions related to azide groups (NH⋯N and CH⋯N hydrogen bonds) in the stabilization of its supramolecular structure. According to data obtained from thermal analysis (TG/DTG/DTA), all complexes are decomposed at four or more thermal stages below 1000 °C. Moreover antimicrobial activities of the compounds were screened against some gram positive and gram negative bacteria. Furthermore anticancer activities of the complexes were studied against MDA-MB468 and k562 as two cancer cell lines. In final, three zinc complexes were also synthesized in nano scale by sonochemical method and one of them was utilized as the precursor for preparation of nanostructure ZnO confirmed by XRD pattern and SEM image.

A Highly Selective "Turn-on" Fluorescent Probe for Detection of Fe3+ in Cells

A new "turn-on" fluorescent probe Py based on rhodamine and piperonaldehyde was designed and synthesized for detecting Fe³⁺ in cells. The free probe Py was non-fluorescent. While only upon addition of Fe³⁺, the significant increase of the fluorescence and color were observed which could be visible directly by "naked-eye". The probe Py shows high selectivity and sensitivity for Fe³⁺ over other common metal ions in EtOH-H₂O (3/2, v/v) mixed solution. The association constant and the detection limit were calculated to be 4.81 × 10⁴ M^-1 and 1.18 × 10^-8 mol/L respectively. The introduction of piperonaldehyde unit could increase probe rigidity which could enhance its optical properties. Meanwhile, the binding mode between Py and Fe³⁺ was found to be a 1:1 complex formation. The density functional theory (DFT) calculations were performed which would further confirm the recognition mechanism between probe Py and Fe³⁺. In addition, the probe has been proved to be reversible for detecting Fe³⁺. Moreover, the probe Py was used to detect Fe³⁺ in cells successfully.

Development of rhodamine-based fluorescent probes for sensitive detection of Fe3+ in water: spectroscopic and computational investigations

Four novel rhodamine-based fluorescent probes (RE1–RE4) were designed and synthesized for sensitive detection of Fe³⁺ in water.

Two novel pyrazole-based chemosensors: “naked-eye” colorimetric recognition of Ni2+ and Al3+ in alcohol and aqueous DMF media

Sensors Pry-Flu and Pry-R6G were found to have a wide pH range (4–12), good anti-jamming ability and can be reused. And the sensors Pry-Rhy and Pyr-R6G could be quite useful for the fabrication of sensing devices with fast and convenient detection of Ni²⁺ and Al³⁺.