A highly selective colorimetric and fluorescent probe for quantitative detection of Cu2+/Co2+: The unique ON-OFF-ON fluorimetric detection strategy and applications in living cells/zebrafish

Development of a Coumarin-Based Schiff Base Fluorescent Probe and its Application in Detection of Cu²⁺

A highly practical Schiff base fluorescent probe, (E)-3-amino-N'-((7-(diethylamino)-2-oxo-2 H-chromen-3-yl)methylene)thiophene-2-carbohydrazide (M), with a facile synthetic route has been successfully developed. M has been utilized for the specific detection of Cu2+ in THF/H2O Tris buffer solution (v/v = 9:1, 0.01 M, pH = 7.4) via the fluorescence quenching mechanism. The detection of Cu2+ by M has been largely unaffected by interfering ions and has demonstrated a distinct dual-channel response in both colorimetry and fluorescence. The response time of M towards Cu2+ is remarkably fast, taking only 30 s. Additionally, M exhibits exceptional sensitivity with a limit of detection (LOD) as low as 1.76 × 10- 7 M. The stoichiometric ratio between M and Cu2+ has been determined to be 1:1 through Job's Plot, while the binding constant has been calculated as 1.19 × 104 M- 1 using the Benesi-Hildebrand equation. The structure of M has been elucidated by 1H NMR and ESI-MS analyses, thereby confirming the binding mode between M and Cu2+. Further validation has been achieved through DFT calculations. The test paper based on M has finally been prepared for the rapid and convenient detection of Cu2+. The M has also been utilized for the detection of Cu2+ in real samples, including lake water, onions, and coffee, demonstrating favorable recovery rates. Moreover, successful visual detection has been achieved in food samples such as bean sprouts and rice. The aforementioned examples have collectively illustrated the practical applicability of M in authentic samples.

The Development of a Selective Colorimetric Sensor for Cu2+ and Zn2+ in Mineral Supplement with Application of a Smartphone Paper-Based Assay of Cu2+ in Water Samples

Herein, we developed a colorimetric method for the determination of Cu2+ and Zn2+ using NBD-G as a novel selective metal sensor. NBD-G was easily synthesized by a nucleophilic substitution reaction between 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBD-Cl) and Girard's Reagent P. The NBD-G solution is yellow, but when it reacts with Cu2+ and Zn2+, its color changes selectively to red (510 nm) and orange (480 nm), respectively. NBD-G was used as a sensor for Cu2+ and Zn2+, showing a high sensitivity down to 0.77 µM for Cu2+ and 1.66 µM for Zn2+. NBD-G could determine both metals simultaneously; thus, it was applied to determine them in multimineral supplements, which showed excellent recoveries. Next, a filter paper impregnated with NBD-G was prepared as a test paper, and a simple, selective, and rapid onsite method for quantifying Cu2+ was developed as, interestingly, the paper showed no change upon the addition of Zn2+. Next, Cu2+ could be quantified with high selectivity and accuracy by photographing the color change with a smartphone camera and processing the image with Image J. The detection limit for Cu2+ using this method was 3.9 µM. Finally, the NBD-G test paper method was able to satisfactorily quantify Cu2+ spiked into the rainwater.

Emission-based sensing of cobalt (II) and vitamin B12 via a bis-indole derivative

In this study, a bis-indole compound was synthesized, characterized by 1H NMR, Fourier transform infrared, and mass spectroscopic measurements and used as a selective and efficient probe for the spectrofluorimetric analysis of Co (II). The cobalt-induced quenching in the emission maximum at 567 nm was considered as the analytical signal in calibration studies. When encapsulated in a polymethyl methacrylate (PMMA) matrix, the bis-indole compound exhibited a limit of detection (LOD) of 3.60 × 10-11 M for Co (II). Vitamin B12, which contains a cobalt ion in the center of a corrin ring in its structure, was also successfully quantified using the same probe. The bis-indole compound showed a linear response based on quenching for increasing concentrations of vitamin B12, partially mimicking the contracted tetrapyrrole ring found naturally in the center of vitamin B12. The LOD for vitamin B12 was found to be 76 nm. Promising photophysical properties of the proposed probe, including high molar extinction coefficient, considerable quantum yield (0.46 and 0.64 in tetrahydrofuran and PMMA, respectively), high Stoke's shift and satisfactory photostability, make it a good choice for fluorescence-based Co (II) determination. The ML3-type stoichiometry of the complex between the dye and cobalt was elucidated both by Job's method and by high-resolution mass spectrometry (HR-MS).

Coumarin Based Fluorescent Probe for Detecting Heavy Metal Ions

Heavy metals such as Iron, Copper, and Zinc are micro-essential trace metal and involve animportant biological role, but it quickly turns toxic at exceeding the permissible limit, causing gastrointestinal irritation, liver, bone, and kidney damage, as well as disorders including Wilson's, Parkinson's, and Alzheimer's. It is important to detect the metal ions as well as their concentration quickly and affordable cost using organic probes. Among the organic probes,the coumarin fluorescent probe shows a very prominent candidate with heavy metal ions. Therefore, in the present review, we reviewed the very recent literature the identify the heavy metals using modified coumarin fluorescent probes. Readers will get information quickly about the method of preparation of modified coumarin core and their use as fluorescent probes with heavy metals using absorption and emission spectroscopic methods along with the probable mechanistic pathway of detection.

Recent advances in the fluorimetric and colorimetric detection of cobalt ions

Cobalt is an essential metal to maintain several functions in the human body and is present in functional materials for numerous applications. Thus, to monitor these functions, it is necessary to develop suitable probes for the detection of cobalt. Presently, researchers are focused on designing different chemosensors for the qualitative and quantitative detection of the metal ions. Among the numerous methods devised for the identification of cobalt ions, colorimetric and fluorimetric techniques are considered the best choice due to their user-friendly nature, sensitivity, accuracy, linearity and robustness. In these techniques, the interaction of the analyte with the chemosensor leads to structural changes in the molecule, causing the emission and excitation intensities (bathochromic, hyperchromic, hypochromic, and hypsochromic) to change with a change in the concentration of the analyte. In this review, the recent advancements in the fluorimetric and colorimetric detection of cobalt ions are systematically summarized, and it is concluded that the development of chemosensors having distinctive colour changes when interacting with cobalt ions has been targeted for on-site detection. The chemosensors are grouped in various categories and their comparison and the discussion of computational studies will enable readers to have a quick overview and help in designing effective and efficient probes for the detection of cobalt in the field of chemo-sensing.

Recent Development on Copper-Sensor and its Biological Applications: A Review

Metal ion recognition is one of the most prospective research topics in the field of chemical sensors due to its wide range of clinical, biological and environmental applications. In this context, hydrazones are well known compounds that exhibit metal sensing and several biological properties due to the presence of N=CH- bond. Some of the biological properties includes anti-cancer, anti-tumor, anti-oxidant, anti-microbial activities. Hydrazones are also used as a ligand to detect metal ion as well as to generate metal complexes that exhibit medicinal properties. Thus, in recent years, many attempts were made to develop novel ligands with enhanced metal sensing and medicinal properties. In this review, some of the recent development on the hydrazones and their copper complexes are covered from the last few years from 2015-2023. These includes significance of copper ions, synthesis, biological properties, mechanism and metal sensing properties of some of the copper complexes were discussed.

A novel lipid droplets/lysosomes-targeting colorimetric and ratiometric fluorescent probe for Cu2+ and its application

A novel multifunctional fluorescent probe LL2 was prepared via a one-step condensation reaction between 3-formyl-N-butylcarbazole and 2-Hydroxy-1-naphthylhydrazone. LL2 can work as a colorimetric probe for Cu²⁺, and can also selectively recognize Cu²⁺ via ratiometric fluorescence signal. After the addition of Cu²⁺, the probe LL2 responded rapidly within 5 s and reached stability within 30 s. In natural light, when Cu²⁺ were added to the solution, the color of probe LL2 changed from yellowish to colorless, while there was a discernible fluorescence changed from green to blue under a 365 nm UV lamp. The ratiometric fluorescence intensity (F₄₄₉/F₅₁₀) showed a good linear relationship (R² = 0.9902) with Cu²⁺ concentration in the concentration range of 0-5 μmol/L, and the minimum detection limit was 1.96 μM. Cell imaging experiments showed that LL2 could capture fluorescence signals in the green and blue channels of HepG2 cells through fluorescence confocal microscope, and successfully recognize exogenous Cu²⁺ in HepG2 cells. In addition, fluorescence co-localization experiments showed that LL2 could target both lipid droplets and lysosomes. Meanwhile, LL2 could be applied to filter paper strip assay and detection of Cu²⁺ in actual water samples. These results indicated that probe LL2 has a good capability for monitoring Cu²⁺ in environment and living cells.

A Bifunctional Fluorescence Probe Based on AIE-ICT Strategy for Visual Detection of Cu2+/Co2+ in Complex Matrix

A novel fluorescence chemical sensor-based probe 1-{[(E)-(2-aminophenyl)azanylidene]methyl}naphthalen-2-ol (AMN) was designed and synthesized, which performed a "naked eye" detection ability toward Cu²⁺ and Co²⁺ based on aggregation-induced emission (AIE) fluorescence strategy. It has sensitive detection ability for Cu²⁺ and Co²⁺. In addition, the color changed from yellow-green to orange under the sunlight, realizing the rapid identification of Cu²⁺/Co²⁺, which has the potential of on-site visual detection under the "naked eye". Moreover, different "on" and "off" fluorescence expressions were exhibited under excessive glutathione (GSH) in AMN-Cu²⁺ and AMN-Co²⁺ systems, which could be employed to distinguish Cu²⁺ from Co²⁺. The detection limits for Cu²⁺ and Co²⁺ were measured to be 8.29 × 10^-8 M and 9.13 × 10^-8 M, respectively. The binding mode of AMN was calculated to be 2:1 by Jobs' plot method analysis. Ultimately, the new fluorescence sensor was applied to detect Cu²⁺ and Co²⁺ in real samples (tap water, river water, and yellow croaker), and the results were satisfying. Therefore, this high-efficiency bifunctional chemical sensor platform based on "on-off" fluorescence detection will provide significant guidance for the advance development of single-molecule sensors for multi-ion detection.

The Synthesis of 2,2-BIS(1-INDOL-3-YL)Acenaphthylene-1(2)-Ones Using Nanocatalysis: Fluorescent Sensing for Cu2+ Ions

2,2-bis(1H-indol-3-yl)acenaphthylene-1(2H)-ones were synthesised by the reaction of acenaphthenequinone and 2 equivalents of indole using Fe3O4@SiO2@Si-Pr-NH-CH2CH2NH2 as the basic magnetic nanocatalyst, assembled under greener and sustainable conditions in high purity and yields. Furthermore, the photoluminescence properties of 2,2-bis(2-methyl-1H-indol-3-yl)acenaphthylene-1(2H)-one were exploited for the sensing of copper ions in the mixed solvent systems comprising H2O and CH3CN in excitation wavelength at 410 nm with a detection limit of 9.5 ∙ 10–6 M.

A novel double target fluorescence probe for Al3+/Mg2+ detection with distinctively different responses and its applications in cell imaging

The metal cations, Al³⁺ and Mg²⁺, could affect human health and cell biological processes. Their fast and selective detection using one probe remains a challenge. A novel fluorescence probe, N'-((1-hydroxynaphthalen-2-yl)methylene)isoquinoline-3-carbohydrazide (NHMI), was developed for selectively monitoring Al³⁺ and Mg²⁺. The probe NHMI showed a distinctive "turn-on" fluorescence signal towards Al³⁺ and Mg²⁺ (cyan for Al³⁺ with 2556-folds enhancement and yellow for Mg²⁺ with 88-folds enhancement), which is quite distinct from other metal cations and allows for naked-eye detection. This interesting response was attributed to the influence of PET, ESIPT process and CHEF effect, when Al³⁺ or Mg²⁺ chelated with NHMI. Furthermore, the fluorescence titration experiments manifested that the detection limit of probe NHMI for Al³⁺/Mg²⁺ was as low as 1.20 × 10^-8 M and 7.69 × 10^-8 M, respectively. The formed complexes NHMI-Al³⁺ and NHMI-Mg²⁺ were analyzed by Job's plot, ESI-MS, ¹H NMR and FT-IR. The coordination pockets and fluorescence mechanisms of two metal complexes were explored by density functional theory calculation. Moreover, NHMI showed low cytotoxicity and good cell permeability. Fluorescence bioimaging of Al³⁺/Mg²⁺ in MCF-7 cells with NHMI indicated its potential application in biological diagnostic analysis.

Hydrazone derivative bearing coumarin for the relay detection of Cu2+ and H2S in an almost neat aqueous solution and bioimaging in lysosomes

A new morpholine functionalized coumarin-based fluorescent probe 1 was easily synthesized. The probe realized the sequentially detecting of Cu²⁺ and H₂S in the HEPES buffer solution (20 mM, pH = 5.0). It made a turn-off fluorescence response to Cu²⁺ by using a complex formation with a 2:1 binding mode, and the resulting complex was able to detect H₂S according to the displacement approach with a turn-on fluorescence response. The detecting limits of probe 1 for Cu²⁺ and 1-Cu²⁺ system for H₂S were calculated to be 26 nM and 88.5 nM, respectively. This "on-off-on" recognition process was demonstrated by ultraviolet-visible spectroscopy, fluorescence spectroscopy, using proton nuclear magnetic resonance studies, electrospray ionization mass spectroscopy, single crystal X-ray diffraction, and using density functional theory calculations. In addition, both cell imaging and co-staining experiments showed that the probe could be utilized to visually detect Cu²⁺ and H₂S in lysosomes.

Highly selective and sensitive chemosensor for Al(III) based on isoquinoline Schiff base

As a colorimetric and fluorescent turn-on sensor to Al³⁺, N'-(2-hydroxybenzylidene)isoquinoline-3-carbohydrazide (HL) has been easily synthesized. The fluorescence intensity increases by 273 times in the presence of Al³⁺ at 458 nm. Meanwhile, the experiment data indicate that the limit of detection for Al³⁺ is 1.11 × 10^-9 M. Remarkably, the blue fluorescence signal of HL-Al³⁺ could be specially observed by the naked eye under UV light and is significantly different from those of other metal ions. Fluorescence switch based on the control of Al³⁺ and EDTA proved HL could act as a reversible chemosensor. According to ESI-MS result and the Job's plots, the 2:1 coordination complex formed by HL and Al³⁺ could be produced. Density functional theory calculations were performed to illustrate the structures of HL and complex. The cell imaging experiment indicates that HL can be applied for monitoring intracellular Al³⁺ levels in cells.

A dual-functional fluorescent probe for sequential determination of Cu2+/S2- and its applications in biological systems

A new acylhydrazine-derived Schiff base fluorescence probe DMI based on "ON-OFF-ON" fluorescence strategy was presented in this paper. Probe DMI could detect Cu²⁺ selectively and sensitively with dramatic fluorescence quenching in CH₃OH-PBS (v/v = 3:7) mixed solution. Once the complex DMI-Cu²⁺ interacted with S^2-, 10.67-folds fluorescence increase was induced via a displacement mechanism under the same experimental conditions. The corresponding detection limits for Cu²⁺ and S^2- were calculated to be 1.52 × 10^-8 M and 1.79 × 10^-8 M, respectively. The structures of DMI and DMI-Cu²⁺ were systematically characterized by Job's plot analysis, ESI-MS, IR, X-ray diffraction and density functional theory calculations. Furthermore, fluorescence imaging in MCF-7 cells and zebrafish demonstrated the probe DMI could act as a useful tool to monitor and track intracellular Cu²⁺ and S^2-, which was encouraged by remarkable fluorescence performance and low cytotoxicity. Importantly, the complex DMI-Cu²⁺ could be applied to detect corrupt blood samples, which could estimate the time of death.

A Coumarin-Based Fluorescent Probe for Ratiometric Detection of Cu2+ and Its Application in Bioimaging

The fluorescent probe L, based on naphthalimide-modified coumarin, was designed, synthesized, and characterized, which could recognize Cu2+ from other cations selectively and sensitively in HEPES buffer (10 mM, Ph = 7. 4)/CH3CN (1:4, V/V). When the probe L interacted with Cu2+, the color and the fluorescent intensity changed obviously and it provided the naked-eye detection for Cu2+. The recognition mode between them was achieved by Job's plot, IR, MS, SEM, and 1HNMR. In addition, test strips made from L could still interact with Cu2+ in tap water effectively. The limit of detection (LOD) of L was 3.5 × 10-6 M. Additionally, the density functional theory (DFT) calculation method was used to analyze the action mechanism of L toward Cu2+. Importantly, the fluorescent probe L could demonstrate favorable selectivity toward Cu2+ in Caenorhabditis elegans. Thus, L was considered to have some potential for application in bioimaging.