Engineering artificial communities for enhanced FTOH degradation

Toward the development of a molecular toolkit for the microbial remediation of per-and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFAS) are highly fluorinated synthetic organic compounds that have been used extensively in various industries owing to their unique properties. The PFAS family encompasses diverse classes, with only a fraction being commercially relevant. These substances are found in the environment, including in water sources, soil, and wildlife, leading to human exposure and fueling concerns about potential human health impacts. Although PFAS degradation is challenging, biodegradation offers a promising, eco-friendly solution. Biodegradation has been effective for a variety of organic contaminants but is yet to be successful for PFAS due to a paucity of identified microbial species capable of transforming these compounds. Recent studies have investigated PFAS biotransformation and fluoride release; however, the number of specific microorganisms and enzymes with demonstrable activity with PFAS remains limited. This review discusses enzymes that could be used in PFAS metabolism, including haloacid dehalogenases, reductive dehalogenases, cytochromes P450, alkane and butane monooxygenases, peroxidases, laccases, desulfonases, and the mechanisms of microbial resistance to intracellular fluoride. Finally, we emphasize the potential of enzyme and microbial engineering to advance PFAS degradation strategies and provide insights for future research in this field.

Stability and Biotransformation of 6:2 Fluorotelomer Sulfonic Acid, Sulfonamide Amine Oxide, and Sulfonamide Alkylbetaine in Aerobic Sludge

The 6:2 fluorotelomer sulfonamide (6:2 FTSAm)-based compounds signify a prominent group of per- and polyfluoroalkyl substances (PFAS) widely used in contemporary aqueous film-forming foam (AFFF) formulations. Despite their widespread presence, the biotransformation behavior of these compounds in wastewater treatment plants remains uncertain. This study investigated the biotransformation of 6:2 FTSAm-based amine oxide (6:2 FTNO), alkylbetaine (6:2 FTAB), and 6:2 fluorotelomer sulfonic acid (6:2 FTSA) in aerobic sludge over a 100-day incubation period. The biotransformation of 6:2 fluorotelomer sulfonamide alkylamine (6:2 FTAA), a primary intermediate product of 6:2 FTNO, was indirectly assessed. Their stability was ranked based on the estimated half-lives (t1/2): 6:2 FTAB (no obvious products were detected) ≫ 6:2 FTSA (t1/2 ≈28.8 days) > 6:2 FTAA (t1/2 ≈11.5 days) > 6:2 FTNO (t1/2 ≈1.2 days). Seven transformation products of 6:2 FTSA and 15 products of 6:2 FTNO were identified through nontarget and suspect screening using high-resolution mass spectrometry. The transformation pathways of 6:2 FTNO and 6:2 FTSA in aerobic sludge were proposed. Interestingly, 6:2 FTSAm was hardly hydrolyzed to 6:2 FTSA and further biotransformed to perfluoroalkyl carboxylic acids (PFCAs). Furthermore, the novel pathways for the generation of perfluoroheptanoic acid (PFHpA) from 6:2 FTSA were revealed.

Aerobic biotransformation of 6:2 fluorotelomer sulfonate in soils from two aqueous film-forming foam (AFFF)-impacted sites

Although 6:2 fluorotelomer sulfonate (6:2 FTS) is a common ingredient in aqueous film-forming foam (AFFF) formulations, its environmental fate at AFFF-impacted sites remains poorly understood. This study investigated the biotransformation of 6:2 FTS in microcosms prepared with soils collected from two AFFF-impacted sites; the former Loring Air Force Base (AFB) and Robins AFB. The half-life of 6:2 FTS in Loring soil was 43.3 days; while >60 mol% of initially spiked 6:2 FTS remained in Robins soil microcosms after a 224-day incubation. Differences in initial sulfate concentrations and the depletion of sulfate over the incubation likely contributed to the different 6:2 FTS biotransformation rates between the two soils. At day 224, stable transformation products, i.e., C4C7 perfluoroalkyl carboxylates, were formed with combined molar yields of 13.8 mol% and 1.2 mol% in Loring and Robins soils, respectively. Based on all detected transformation products, the biotransformation pathways of 6:2 FTS in the two soils were proposed. Microbial community analysis suggests that Desulfobacterota microorganisms may promote 6:2 FTS biotransformation via more efficient desulfonation. In addition, species from the genus Sphingomonas, which exhibited higher tolerance to elevated concentrations of 6:2 FTS and its biotransformation products, are likely to have contributed to 6:2 FTS biotransformation. This study demonstrates the potential role of biotransformation processes on the fate of 6:2 FTS at AFFF-impacted sites and highlights the need to characterize site biogeochemical properties for improved assessment of 6:2 FTS biotransformation behavior.

Microfluidic Chip-Based Modeling of Three-Dimensional Intestine-Vessel-Liver Interactions in Fluorotelomer Alcohol Biotransformation

Plyfluoroalkyl substance (PFAS), featured with incredible persistence and chronic toxicity, poses an emerging ecological and environmental crisis. Although significant progress has been made in PFAS metabolism in vivo, the underlying mechanism of metabolically active organ interactions in PFAS bioaccumulation remains largely unknown. We developed a microfluidic-based assay to recreate the intestine-vessel-liver interface in three dimensions, allowing for high-resolution, real-time images and precise quantification of intestine-vessel-liver interactions in PFAS biotransformation. In contrast to the scattered arrangement of vascular endothelium on the traditional d-polylysine-modified two-dimensional (2D) plate, the microtubules in our three-dimensional (3D) platform formed a dense honeycomb network through the ECM, with longer tubular structures. Additionally, the slope culture of epithelial cells in our platform exhibited a closely arranged and thicker cell layer than the planar culture. To dynamically monitor the metabolic crosstalk in the intestinal-vascular endothelium-liver interaction under exposure to fluorotelomer alcohols (FTOHs), we combined the chip with a solid-phase extraction-mass spectrometry (SPE-MS) system. Our findings revealed that endothelial cells were involved in the metabolic process of FTOHs. The transformation of intestinal epithelial and hepatic epithelial cells produces toxic metabolite fluorotelomer carboxylic acids (FTCAs), which circulate to endothelial cells and affect angiogenesis. This system shows promise as an enhanced surrogate model and platform for studying pollutant exposure as well as for biomedical and pharmaceutical research.

In situ investigation of detoxification and metabolic effects of polyfluoroalkyl substances on metal-organic frameworks combined with cell-cultured microfluidics

Over 9000 types of per- and polyfluoroalkyl substances (PFASs) have been produced that exhibit environmental persistence, bioaccumulation and biotoxicity, and pose a potential hazard to human health. Although metal-organic frameworks (MOFs) are promising structure-based materials for adsorbing PFASs, the enormous structural diversity and variability of the pharmacologic action of PFASs present challenges to the development of structure-based adsorbents. To address this issue, we propose an in situ platform for the high-throughput identification of efficient MOF sorbents that can adsorb PFASs and their metabolism using a filter-chip-solid phase extraction-mass spectrometry (SPE-MS) system. As a proof of concept, we screened BUT-16 as an attractive material for in situ fluorotelomer alcohol (FTOH) adsorption. The results demonstrated that FTOH molecules were adsorbed around the surface of the large hexagonal pores of BUT-16 by forming multiple hydrogen bonding interactions with its Zr6 clusters. The FTOH removal efficiency of the BUT16 filter was 100% over a period of 1 min. To determine the FTOH metabolism effects in different organs, HepG2 human hepatoma, HCT116 colon cancer, renal tubular HKC, and vascular endothelial HUVEC cells were cultured on a microfluidic chip, and SPE-MS was used to track a variety of cell metabolites in real time. Overall, the filter-Chip-SPE-MS system is a versatile and robust platform for the real-time monitoring of noxious pollutant detoxification, biotransformation, and metabolism, which facilitates pollutant antidote development and toxicology assay.

A review of the occurrence, transformation, and removal technologies for the remediation of per- and polyfluoroalkyl substances (PFAS) from landfill leachate

Per- and polyfluoroalkyl substances (PFAS) are persistent organic pollutants (POPs) that pose significant environmental and human health risks. The presence of PFAS in landfill leachate is becoming an increasingly concerning issue. This article presents a comprehensive review of current knowledge and research gaps in monitoring and removing PFAS from landfill leachate. The focus is on evaluating the effectiveness and sustainability of existing removal technologies, and identifying areas where further research is needed. To achieve this goal, the paper examines the existing technologies for monitoring and treating PFAS in landfill leachate. The review emphasizes the importance of sample preparation techniques and quality assurance/quality control measures in ensuring accurate and reliable results. Then, this paper reviewed the existing technologies for removal and remediation of PFAS in landfill leachates, such as adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands. Additionally, the paper summarizes the factors that exhibit the performance of various treatment technologies: reaction time, experimental conditions, and removal rates. Furthermore, the paper evaluates the potential application of different remediation technologies (i.e., adsorption, membrane filtration, photocatalytic oxidation, electrocatalysis, biodegradation, and constructed wetlands, etc.) in treating landfill leachate containing PFAS and its precursors, such as fluorotelomeres like FTOH and FTSs. The review highlights the importance of considering economic, technical, and environmental factors when selecting control measures. Overall, this article aims to provide guidance for promoting environmental protection and sustainable development in the context of PFAS contamination in landfill leachate.

A review of microbial degradation of per- and polyfluoroalkyl substances (PFAS): Biotransformation routes and enzymes

Since the 1950s, copious amounts of per- and polyfluoroalkyl substances (PFAS) (dubbed "forever chemicals") have been dumped into the environment, causing heavy contamination of soil, surface water, and groundwater sources. Humans, animals, and the environment are frequently exposed to PFAS through food, water, consumer products, as well as waste streams from PFAS-manufacturing industries. PFAS are a large group of synthetic organic fluorinated compounds with widely diverse chemical structures that are extremely resistant to microbial degradation. Their persistence, toxicity to life on earth, bioaccumulation tendencies, and adverse health and ecological effects have earned them a "top priority pollutant" designation by regulatory bodies. Despite that a number of physicochemical methods exist for PFAS treatment, they suffer from major drawbacks regarding high costs, use of high energy and incomplete mineralization (destruction of the CF bond). Consequently, microbial degradation and enzymatic treatment of PFAS are highly sought after as they offer a complete, cheaper, sustainable, and environmentally friendly alternative. In this critical review, we provide an overview of the classification, properties, and interaction of PFAS within the environment relevant to microbial degradation. We discuss latest developments in the biodegradation of PFAS by microbes, transformation routes, transformation products and degradative enzymes. Finally, we highlight the existing challenges, limitations, and prospects of bioremediation approaches in treating PFAS and proffer possible solutions and future research directions.

Biotransformation of 8:2 Fluorotelomer Alcohol in Soil from Aqueous Film-Forming Foams (AFFFs)-Impacted Sites under Nitrate-, Sulfate-, and Iron-Reducing Conditions

The environmental fate of per- and polyfluoroalkyl substances (PFAS) in aqueous film-forming foams (AFFFs) remains largely unknown, especially under the conditions representative of natural subsurface systems. In this study, the biotransformation of 8:2 fluorotelomer alcohol (8:2 FTOH), a component of new-generation AFFF formulations and a byproduct in fluorotelomer-based AFFFs, was investigated under nitrate-, iron-, and sulfate-reducing conditions in microcosms prepared with AFFF-impacted soils. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) and high-resolution mass spectrometry (HRMS) were employed to identify biotransformation products. The biotransformation was much slower under sulfate- and iron-reducing conditions with >60 mol % of initial 8:2 FTOH remaining after ∼400 days compared to a half-life ranging from 12.5 to 36.5 days under nitrate-reducing conditions. Transformation products 8:2 fluorotelomer saturated and unsaturated carboxylic acids (8:2 FTCA and 8:2 FTUA) were detected under all redox conditions, while 7:2 secondary fluorotelomer alcohol (7:2 sFTOH) and perfluorooctanoic acid (PFOA) were only observed as transformation products under nitrate-reducing conditions. In addition, 1H-perfluoroheptane (F(CF₂)₆CF₂H) and 3-F-7:3 acid (F(CF₂)₇CFHCH₂COOH) were identified for the first time during 8:2 FTOH biotransformation. Comprehensive biotransformation pathways for 8:2 FTOH are presented, which highlight the importance of accounting for redox condition and the related microbial community in the assessment of PFAS transformations in natural environments.

Per- and polyfluoroalkyl substances in the atmosphere of waste management infrastructures: Uncovering secondary fluorotelomer alcohols, particle size distribution, and human inhalation exposure

Per- and polyfluoroalkyl substances (PFAS) have been applied in numerous industrial and consumer products, the majority of which flow into waste management infrastructures (WMIs) at the end of their life cycles, but little is known about atmospheric releases of PFAS from these facilities. In this study, we addressed this key issue by investigating 49 PFAS, including 23 ionic and 26 neutral and precursor PFAS, in the potential sources (n = 4; within or adjacent to WMIs) and reference sites (n = 2; coastal and natural reserve sites) in urban and rural areas of Hong Kong, China. Duplicate samples of air and size-segregated particulate matter were collected for 48 h continuously using a 11-stage Micro-Orifice Uniform Deposit Impactor (MOUDI). In general, fluorotelomer alcohols (FTOHs) and perfluoroalkane sulfonamides were the predominant PFAS classes found across sampling sites. We also demonstrated the release of several less frequently observed semivolatile intermediate products (e.g., secondary FTOHs) during waste treatment. Except for perfluorooctane sulfonate, the size-segregated distributions of particulate PFAS exhibited heterogeneity across sampling sites, particularly in the WMIs, implying combined effects of sorption affinity and emission sources. A preliminary daily air emission estimation revealed that landfill was a relatively important source of PFAS relative to the wastewater treatment plant. A simplified International Commission on Radiological Protection model was used to estimate lung depositional fluxes, and the results showed that inhaled particulate PFAS were mainly deposited in the head airway while fine and ultrafine particles carried PFAS deeper into the lung alveoli. The cumulative daily inhalation dose of gaseous and particulate PFAS ranged from 81.9 to 265 pg/kg/d. In-depth research is required to understand the health effect of airborne PFAS on workers at WMIs.

Construction of Environmental Synthetic Microbial Consortia: Based on Engineering and Ecological Principles

In synthetic biology, engineering principles are applied to system design. The development of synthetic microbial consortia represents the intersection of synthetic biology and microbiology. Synthetic community systems are constructed by co-cultivating two or more microorganisms under certain environmental conditions, with broad applications in many fields including ecological restoration and ecological theory. Synthetic microbial consortia tend to have high biological processing efficiencies, because the division of labor reduces the metabolic burden of individual members. In this review, we focus on the environmental applications of synthetic microbial consortia. Although there are many strategies for the construction of synthetic microbial consortia, we mainly introduce the most widely used construction principles based on cross-feeding. Additionally, we propose methods for constructing synthetic microbial consortia based on traits and spatial structure from the perspective of ecology to provide a basis for future work.

Per- and polyfluoroalkyl substances in the environment

Over the past several years, the term PFAS (per- and polyfluoroalkyl substances) has grown to be emblematic of environmental contamination, garnering public, scientific, and regulatory concern. PFAS are synthesized by two processes, direct fluorination (e.g., electrochemical fluorination) and oligomerization (e.g., fluorotelomerization). More than a megatonne of PFAS is produced yearly, and thousands of PFAS wind up in end-use products. Atmospheric and aqueous fugitive releases during manufacturing, use, and disposal have resulted in the global distribution of these compounds. Volatile PFAS facilitate long-range transport, commonly followed by complex transformation schemes to recalcitrant terminal PFAS, which do not degrade under environmental conditions and thus migrate through the environment and accumulate in biota through multiple pathways. Efforts to remediate PFAS-contaminated matrices still are in their infancy, with much current research targeting drinking water.

A review of the occurrence, transformation, and removal of poly- and perfluoroalkyl substances (PFAS) in wastewater treatment plants

Poly- and perfluoroalkyl substances (PFAS) comprise more than 4,000 anthropogenically manufactured compounds with widescale consumer and industrial applications. This critical review compiles the latest information on the worldwide distribution of PFAS and evaluates their fate in wastewater treatment plants (WWTPs). A large proportion (>30%) of monitoring studies in WWTPs were conducted in China, followed by Europe (30%) and North America (16%), whereas information is generally lacking for other parts of the world, including most of the developing countries. Short and long-chain perfluoroalkyl acids (PFAAs) were widely detected in both the influents (up to 1,000 ng/L) and effluents (15 to >1,500 ng/L) of WWTPs. To date, limited data is available regarding levels of PFAS precursors and ultra-short chain PFAS in WWTPs. Most WWTPs exhibited low removal efficiencies for PFAS, and many studies reported an increase in the levels of PFAAs after wastewater treatment. The analysis of the fate of various classes of PFAS at different wastewater treatment stages (aerobic and/aerobic biodegradation, photodegradation, and chemical degradation) revealed biodegradation as the primary mechanism responsible for the transformation of PFAS precursors to PFAAs in WWTPs. Remediation studies at full scale and laboratory scale suggest advanced processes such as adsorption using ion exchange resins, electrochemical degradation, and nanofiltration are more effective in removing PFAS (~95-100%) than conventional processes. However, the applicability of such treatments for real-world WWTPs faces significant challenges due to the scaling-up requirements, mass-transfer limitations, and management of treatment by-products and wastes. Combining more than one technique for effective removal of PFAS, while addressing limitations of the individual treatments, could be beneficial. Considering environmental concentrations of PFAS, cost-effectiveness, and ease of operation, nanofiltration followed by adsorption using wood-derived biochar and/or activated carbons could be a viable option if introduced to conventional treatment systems. However, the large-scale applicability of the same needs to be further verified.

Biotransformation of perfluoroalkyl acid precursors from various environmental systems: advances and perspectives

Perfluoroalkyl acids (PFAAs) are widely used in industrial production and daily life because of their unique physicochemical properties, such as their hydrophobicity, oleophobicity, surface activity, and thermal stability. Perfluorosulfonic acids (PFSAs) and perfluorocarboxylic acids (PFCAs) are the most studied PFAAs due to their global occurrence. PFAAs are environmentally persistent, toxic, and the long-chain homologs are also bioaccumulative. Exposure to PFAAs may arise directly from emission or indirectly via the environmental release and degradation of PFAA precursors. Precursors themselves or their conversion intermediates can present deleterious effects, including hepatotoxicity, reproductive toxicity, developmental toxicity, and genetic toxicity. Therefore, exposure to PFAA precursors constitutes a potential hazard for environmental contamination. In order to comprehensively evaluate the environmental fate and effects of PFAA precursors and their connection with PFSAs and PFCAs, we review environmental biodegradability studies carried out with microbial strains, activated sludge, plants, and earthworms over the past decade. In particular, we review perfluorooctyl-sulfonamide-based precursors, including perfluroooctane sulfonamide (FOSA) and its N-ethyl derivative (EtFOSA), N-ethyl perfluorooctane sulfonamido ethanol (EtFOSE), and EtFOSE-based phosphate diester (DiSAmPAP). Fluorotelomerization-based precursors are also reviewed, including fluorotelomer alcohols (FTOH), fluorotelomer sulfonates (FTSA), and a suite of their transformation products. Though limited information is currently available on zwitterionic PFAS precursors, a preliminary review of data available for 6:2 fluorotelomer sulfonamide betaine (FTAB) was also conducted. Furthermore, we update and refine the recent knowledge on biotransformation strategies with a focus on metabolic pathways and mechanisms involved in the biotransformation of PFAA precursors. The biotransformation of PFAA precursors mainly involves the cleavage of carbon-fluorine (C-F) bonds and the degradation of non-fluorinated functional groups via oxidation, dealkylation, and defluorination to form shorter-chained PFAAs. Based on the existing research, the current problems and future research directions on the biotransformation of PFAA precursors are proposed.

Effect of substrate concentrations on aerobic biotransformation of 6:2 fluorotelomer sulfonate (6:2 FTS) in landfill leachate

Biotransformation of 6:2 fluorotelomer sulfonate (FTS) results in the formation of short-chain (C4 - C6) perfluorocarboxylic acids (PFCAs) in landfill leachate. Although leachate substrate concentrations (i.e., organic carbon, ammonia) vary widely, their effects on 6:2 FTS biotransformation and PFCAs formation are unknown. This study investigated the effect of organic carbon and ammonia concentration in 6:2 FTS aerobic biotransformation and PFCA formation in leachate. Biotransformation experiments were conducted with sediment collected from a landfill leachate ditch, to which deionized (DI) water and various amounts of leachate were added. Microbial community analysis using 16S rRNA indicated that while phylum Proteobacteria dominated the bacterial composition throughout the 60 days, Actinobacteria increased with time. Many genera from Proteobacteria and Actinobacteria can synthesize a wide array of enzymes, indicating that these phyla are likely to play an important role in 6:2 FTS biotransformation. Higher biotransformation of 6:2 FTS was observed in leachate-added microcosms (∼21%), compared to DI water microcosm (∼14%), likely reflecting the substrate dependency of 6:2 FTS biotransformation. Substrate limiting conditions in DI water microcosm resulted in slightly greater formation of ∑(C4 - C6) PFCAs (∼14 mol%), compared with leachate added microcosms (10-13 mol%). The findings suggest that dilution of landfill leachate, (e.g., during wet seasons), likely results in reduced 6:2 FTS biotransformation and increased PFCAs formation compared to dry conditions. Observed formation of C7 - C8 PFCAs in the live microcosms suggested that landfills act as secondary sources of legacy PFCAs (e.g., perfluorooctanoic acid) in the environment.

Aerobic biotransformation of fluorotelomer compounds in landfill leachate-sediment

Consumer products containing fluorotelomer polymers are a source of fluorotelomer compounds to the environment following their disposal at landfills. The fate and transformation of fluorotelomer compounds are unknown in landfill leachates. This study investigates the aerobic biotransformation of 8:2 fluorotelomer alcohol (FTOH) and 6:2 fluorotelomer sulfonate (FTS) in landfill leachate-sediment microcosms using batch tests. Spiked 8:2 FTOH, 6:2 FTS and their known biotransformation products were quantified in sediment-leachate and headspace over 90 days under aerobic conditions. 8:2 FTOH and 6:2 FTS biotransformation was slow (half-life >>30 d) in landfill leachate-sediment microcosm, suggesting persistence of fluorotelomer compounds under the conditions investigated. Significant volatilization (>20%) of 8:2 FTOH was observed in the microcosm headspace after 90 days. C6 - C8 and C4 - C6 perfluorocarboxylic acids (PFCAs) were the most abundant products for 8:2 FTOH and 6:2 FTS, respectively. PFCAs accounted for 4-9 mol% of the initially spiked parent compounds at 90 days. Perfluorooctanoic acid (PFOA) was the single most abundant product of 8:2 FTOH (>2.8 mol% at 90 days). The unaccounted mass (20 to 35 mol%) of the initially spiked parent compounds indicated formation of fluorotelomer intermediates and sediment-bound residue. Overall the findings suggest that aerobic biotransformation of fluorotelomer compounds acts as a secondary source of long- and short-chain (≤C7) PFCAs in the environment. Partitioning of semi-volatile fluorotelomer compounds (e.g., 8:2 FTOH) to the gas-phase indicates possible long-range transport and subsequent release of PFCAs in pristine environments. Short-chain fluorotelomer replacements (e.g., 6:2 FTS) result in a higher abundance of short-chain PFCAs in landfill leachate. Future research is needed to understand the long-term exposure effects of short-chain PFCAs to humans, aquatic life and biota.

Formation of perfluorocarboxylic acids from 6:2 fluorotelomer sulfonate (6:2 FTS) in landfill leachate: Role of microbial communities

Fluorotelomer compounds in landfill leachate can undergo biotransformation under aerobic conditions and act as a secondary source of perfluorocarboxylic acids (PFCAs) to the environment. Very little is known about the role of various microbial communities towards fluorotelomer compounds biotransformation. Using an inoculum prepared from the sediment of a leachate collection ditch, 6:2 fluorotelomer sulfonate (6:2 FTS) biotransformation experiments were carried out. Specific substrates (i.e., glucose, ammonia) and ammonia-oxidizing inhibitor (allylthiourea) were used to produce two experimental runs with heterotrophic (HET) growth only and heterotrophic with ammonia-oxidizing and nitrite- oxidizing bacteria (HET + AOB + NOB). After 10 days, ∼20% of the spiked 6:2 FTS removal was observed in HET + AOB + NOB, compared to ∼7% under HET condition. Higher 6:2 FTS removal in HET + AOB + NOB likely resulted from ammonia monooxygenase enzyme that catalyzes the first step of ammonia oxidation. The HET + AOB + NOB condition also showed higher PFCA (C4-C6) formation (∼2% of initially spiked 6:2 FTS), possibly due to higher overall bioactivity. Microbial community analysis through 16s rRNA sequencing confirmed that Proteobacteria and Bacteroidetes were the most abundant phyla (>75% relative abundance) under all experimental conditions. High abundance of Actinobacteria (>17%) was observed under the HET + AOB + NOB condition on day 7. Since Actinobacteria can synthesize a wide range of enzymes including monooxygenases, they likely play an important role in 6:2 FTS biotransformation and PFCA production.

Enhanced generation of perfluoroalkyl carboxylic acids (PFCAs) from fluorotelomer alcohols (FTOHs) via ammonia-oxidation process

With the phase-out of persistent, bioaccumalative, and toxic perfluoroalkyl carboxylic acids (PFCAs), it is needed to explore the potential release of PFCAs from precursors being emitted into the environment. Biotransformation of fluorotelomer alcohols (FTOHs) via biological processes in wastewater treatment plants (WWTPs) leads to discharge of PFCAs into receiving waters. However, the commonly existed microbial activity that can impact on FTOHs biodegradation in WWTPs remains unclear. The objective of present research was to explore the relationship between ammonia-oxidation process and the enhanced PFCAs generation from FTOHs biodegradation under aerobic activated sludge. The obtained results indicate that the cometabolism process performed by nitrifying microorganisms (NMs) was responsible for enhanced PFCAs generation. Among NMs, the ammonia-oxidation bacteria that can express non-specific enzyme of ammonia monooxygenases resulted in the enhanced PFCAs generation from FTOHs. Meanwhile, the different addition amount of ammonia contributed to different defluorination efficiency of FTOHs. The present study further correlated the enhanced PFCAs generation from FTOHs biodegradation with ammonia-oxidation process, which can provide practical information on effective management of PFCAs generation in WWTPs.

Effects of microbial activity on perfluorinated carboxylic acids (PFCAs) generation during aerobic biotransformation of fluorotelomer alcohols in activated sludge

Biotransformation of fluorotelomer alcohols (FTOHs) in wastewater treatment plants (WWTPs) can release toxic intermediates and perfluorinated carboxylic acids (PFCAs) to the aqueous environment. However, little information is known about the role of relevant microbial activity (i.e., autotrophs and/or heterotrophs) in biotransformation of FTOHs. Additionally, the dynamics of microbial community in sludge after exposure to FTOHs remain unclear. In the present research, using domestic and industrial WWTP sludge, we performed lab-scale batch experiments to characterize the FTOHs biodegradation property under aerobic condition. Both heterotrophs and the autotrophs were associated with FTOHs biotransformation. However, the microbial activity influenced PFCAs generation efficiency. Autotrophs based on ammonia oxidation (50mgN/L) resulted in more effective generation of PFCAs than heterotrophs based on glucose (200mgC/L) metabolism. Moreover, autotrophs generated more amounts of short-chain PFCAs (carbon number ≤7) than the heterotrophs. The ammonia monooxygenase (AMO) in ammonia oxidizing microorganisms (AOMs) are suggested as responsible for the enhanced generation of PFCAs during FTOHs biotransformation. In the sludge that had been exposed to poly- and perfluorinated alkyl substances in an industrial WWTP, Chlorobi was the predominant microorganisms (36.9%), followed by Proteobacteria (20.2%), Bacteroidetes (11.1%), Chloroflexi (6.2%), Crenarchaeota (5.6%), Planctomycetes (4.2%), and Acidobacteria (3.5%). In the present research, the dosed 8:2 FTOH (12.1mg/L) and its biotransformation products (intermediates and PFCAs) could force a shift in microbial community composition in the sludge. After 192h, Proteobacteria significantly increased and dominated. These results provide knowledge for comprehending the effects of microbial activity on FTOHs biodegradation and the information about interaction between microbial community and the exposure to FTOHs in activated sludge.

Kinetic analysis of aerobic biotransformation pathways of a perfluorooctane sulfonate (PFOS) precursor in distinctly different soils

With the phaseout of perfluorooctane sulfonate (PFOS) production in most countries and its well known recalcitrance, there is a need to quantify the potential release of PFOS from precursors previously or currently being emitted into the environment. Aerobic biodegradation of N-ethyl perfluorooctane sulfonamidoethanol (EtFOSE) was monitored in two soils from Indiana, USA: an acidic forest silt loam (FRST-48, pH = 5.5) and a high pH agricultural loam (PSF-49, pH = 7.8) with similar organic carbon contents (2.4 and 2.6%) for 210 d and 180 d, respectively. At designated times, triplicate samples were sacrificed for which headspace samples were taken followed by three sequential extractions. Extracts were analyzed using HPLC-tandem mass spectrometry. Measured profiles of EtFOSE degradation and generation/degradation of subsequent metabolites were fitted to the Indiana soils data as well as to a previously published data set for a Canadian soil using an R-based model (KinGUII) to explore pathways and estimate half-lives (t_1/2) for EtFOSE and metabolites. EtFOSE degradation ranged from a few days to up to a month. PFOS yields ranged form 1.06-5.49 mol% with the alkaline soils being four to five times higher than the acidic soil. In addition, a direct pathway to PFOS had to be invoked to describe the early generation of PFOS in the Canadian soil. Of all metabolites, the sulfonamidoacetic acids were the most persistent (t_1/2 ≥ 3 months) in all soils. We hypothesized that while pH-pK_a dependent speciation may have impacted rates, differences in microbial communities between the 3 soils arising from varied soil properties including pH, nutrient levels, soil management, and climatic regions are likely the major factors affecting pathways, rates, and PFOS yields.

Groundwater remediation from the past to the future: A bibliometric analysis

Groundwater is an important component of terrestrial ecosystems and plays a role in geochemical cycling. Groundwater is also used for agricultural irrigation and for the domestic supply of drinking water in most nations. However, groundwater contamination has led to many research efforts on groundwater remediation technologies and strategies. This study evaluated a total of 5486 groundwater remediation-related publications from 1995 to 2015 using bibliometric technology and social network analysis, to provide a quantitative analysis and a global view on the current research trend and future research directions. Our results underline a strong research interest and an urgent need to remediate groundwater pollution due to the increasing number of both groundwater contamination and remediation publications. In the past two decades, the United States (U.S.) published 41.1% of the papers and it was the core country of the international collaboration network, cooperating with the other 19 most productive countries. Besides the active international collaboration, the funding agencies also played positive roles to foster the science and technology publications. With respect to the analysis of the distribution of funding agencies, the National Science Foundation of China sponsored most of the groundwater remediation research. We also identified the most productive journals, Environmental Science and Technology and Journal of Contaminant Hydrology, which published 334 and 259 scientific articles (including research articles and reviews) over the past 20 years, respectively. In addition to journal publications, a patent analysis was performed to show the impact of intellectual property protection on journal publications. Three major remediation technologies, including chemical oxidation, biodegradation and adsorption, have received increasing interest in both journal publication and patent development. Our results provide a valuable reference and global overview to identify the potential obstacles and opportunities for researchers who currently work on groundwater contamination, remediation and related topics.

Impact of 6:2 fluorotelomer alcohol aerobic biotransformation on a sediment microbial community

Sediment microbial communities are responsible for many chemical biotransformation processes in the aquatic environment and play a critical role in various ecosystems and biogeochemical cycling. However, the impact of polyfluoroalkyl substances on sediment microbial communities remains unclear. These substances are increasingly being used in consumer and industrial products to replace environmentally persistent perfluoroalkyl substances. In this study, we investigated the effects of low (5mg/L) and high (15mg/L) doses of 6:2 fluorotelomer alcohol [6:2 FTOH, F(CF₂)₆CH₂CH₂OH] on the structure of a sediment microbial community. 6:2 FTOH biotransformation was rapid in the sediment mixture with a half-life <3days, regardless of the initial doses. After 28days, major products produced in the high dose condition included 28mol% 5:2 sFTOH [F(CF₂)₅CH(OH)CH₃], 9.6mol% 5:3 Acid [F(CF₂)₅CH₂CH₂COOH] and 11mol% PFHxA [F(CF₂)₅COOH], while 73mol% 5:2 sFTOH, 23mol% 5:3 Acid and 26mol% PFHxA were observed in the low dose condition. In the original (control) sediment without 6:2 FTOH dosing, Proteobacteria was the predominant microorganism (18%), followed by Chloroflexi (14%), Verrucomicrobia (13%), Firmicutes (3.4%), Bacterioidetes (2.4%), Actinobacteria (1.7%) and Planctomycetes (1.3%). The presence of 6:2 FTOH and the accumulation of transient transformation products in the sediment exerted selection pressure on the microbial taxonomic distribution and diversity. Our observations indicate that potential 6:2 FTOH degraders and tolerant strains, such as Dokdonella spp., Thauera spp., Albidovulum spp. and Caldanaerovirga spp., existed in the sediment mixture and began to dominate over time. This suggests that these genera might have higher tolerance towards elevated 6:2 FTOH and its transformation products. These findings on the characterization of sediment microbial community stability and dynamics will help predict changes in response to perfluoroalkyl and polyfluoroalkyl substances and also help identify robust microbial strains to degrade polyfluoroalkyl substances in the environment.

Uptake, Translocation, and Metabolism of 8:2 Fluorotelomer Alcohol in Soybean (Glycine max L. Merrill)

Biotransformation of fluorotelomer alcohols (FTOHs) is widely considered as an additional source of perfluorocarboxylic acids (PFCAs) in environmental biota. Compared with the extensive studies conducted in animals and microbes, biotransformation pathways of FTOHs in plants are still unclear. In this study, a hydroponic experiment was conducted to investigate the uptake, translocation and metabolism of 8:2 FTOH in soybean (Glycine max L. Merrill) over 144 h. 8:2 FTOH and its metabolites were found in all parts of soybean plants. At the end of the exposure, 7:3 FTCA [F(CF2)7CH2CH2COOH] was the primary metabolite in roots and stems, while PFOA [F(CF2)7COOH] was predominant in leaves. PFOA and 7:3 FTCA in the soybean-solution system accounted for 6.01 and 5.57 mol % of the initially applied 8:2 FTOH, respectively. Low levels of PFHpA [F(CF2)6COOH] and PFHxA [F(CF2)5COOH] in solutions and soybean roots resulted from microbial metabolism and plant root uptake. Glutathione-conjugated metabolites in soybean tissues were also identified. The activities of alcohol dehydrogenase, aldehyde dehydrogenase, and glutathione S-transferase in soybean roots increased during the exposure, suggesting their roles in 8:2 FTOH metabolism in soybean. This study provides important information for a better understanding of the uptake and metabolism of FTOHs and fluorotelomer-based compounds in plants.