Inhibition of microbial fuel cell operation for municipal wastewater treatment by impact loads of free ammonia in bench- and 45L-scale

The effect of ammonia concentration on the treatment of bio electrochemical leachate using MFCs technology

Microbial fuel cells (MFCs) have garnered attention in bio-electrochemical leachate treatment systems. The most common forms of inorganic ammonia nitrogen are ammonium ([Formula: see text]) and free ammonia. Anaerobic digestion can be inhibited in both direct (changes in environmental conditions, such as fluctuations in temperature or pH, can indirectly hinder microbial activity and the efficiency of the digestion process) and indirect (inadequate nutrient levels, or other conditions that indirectly compromise the microbial community's ability to carry out anaerobic digestion effectively) ways by both kinds. The performance of a double-chamber MFC system-composed of an anodic chamber, a cathode chamber with fixed biofilm carriers (carbon felt material), and a Nafion 117 exchange membrane is examined in this work to determine the impact of ammonium nitrogen ([Formula: see text]) inhibition. MFCs may hold up to 100 mL of fluid. Therefore, the bacteria involved were analysed using 16S rRNA. At room temperature, with a concentration of 800 mg L-1 of ammonium nitrogen and 13,225 mg L-1 of chemical oxygen demand (COD), the study produced a considerable power density of 234 mWm-3. It was found that [Formula: see text] concentrations above 800 mg L-1 have an inhibitory influence on power output and treatment effectiveness. Multiple routes removed the most nitrogen ([Formula: see text]-N: 87.11 ± 0.7%, NO2 -N: 93.17 ± 0.2% and TN: 75.24 ± 0.3%). Results from sequencing indicate that the anode is home to a rich microbial community, with anammox (6%), denitrifying (6.4%), and electrogenic bacteria (18.2%) making up the bulk of the population. Microbial fuel cells can efficiently and cost-effectively execute anammox, a green nitrogen removal process, in landfill leachate.

Optimizing total ammonia-nitrogen concentration for enhanced microbial fuel cell performance in landfill leachate treatment: a bibliometric analysis and future directions

Untreated landfill leachate can harm the environment and human health due to its organic debris, heavy metals, and nitrogen molecules like ammonia. Microbial fuel cells (MFCs) have emerged as a promising technology for treating landfill leachate and generating energy. However, high concentrations of total ammonia-nitrogen (TAN), which includes both ammonia and the ammonium ion, can impede MFC performance. Therefore, maintaining an adequate TAN concentration is crucial, as both excess and insufficient levels can reduce power generation. To evaluate the worldwide research on MFCs using landfill leachate as a substrate, bibliometric analysis was conducted to assess publication output, author-country co-authorship, and author keyword co-occurrence. Scopus and Web of Science retrieved 98 journal articles on this topic during 2011-2022; 18 were specifically evaluated and analysed for MFC ammonia inhibition. The results showed that research on MFC using landfill leachate as a substrate began in 2011, and the number of related papers has consistently increased every 2 years, totaling 4060 references. China, India, and the USA accounted for approximately 60% of all global publications, while the remaining 40% was contributed by 70 other countries/territories. Chongqing University emerged as one of the top contributors among this subject's ten most productive universities. Most studies found that maintaining TAN concentrations in the 400-800 mg L-1 in MFC operation produced good power density, pollution elimination, and microbial acclimatization. However, the database has few articles on MFC and landfill leachate; MFC ammonia inhibition remains the main factor impacting system performance. This bibliographic analysis provides excellent references and future research directions, highlighting the current limitations of MFC research in this area.

Denitrification performance, bioelectricity generation and microbial response in microbial fuel cell - constructed wetland treating carbon constraint wastewater

For the deep reduction of nitrogen, the microbial fuel cell-constructed wetland (MFC-CW) was conducted for treating carbon constraint wastewater. Results indicated that nitrogen removal decreased from 94.96% to 24.96% with influent COD/TN (chemical oxygen demand/total nitrogen) from 4 to 0. MFC-CW was seriously affected by low organic wastewater. Wetland plants contributed to denitrification, with TN removal increasing from 46.13% to 64.87%. The bioenergy output showed a linear relationship with influent COD, and the maximum power density of 1.17 mW/m² was obtained. Correlation analysis indicated that functional genera of Paenibacillus, Trichococcus, norank_KD4-96, norank_OLB14 played a crucial role in nitrogen removal. Influent COD and wetland plants affected carbon and nitrogen metabolisms, and key genes related to denitrification were more abundant in the cathode. Findings illustrated the nitrogen metabolism in MFC-CW with carbon constraint wastewater and will extend the application of MFC-CW in secondary effluent treatment from wastewater treatment plants.

Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review

High-energy consumption globally has raised questions about the low environmentally friendly and high-cost processes used until now for energy production. Microbial fuel cells (MFCs) may support alternative more economically and environmentally favorable ways of bioenergy production based on their advantage of using waste. MFCs work as bio-electrochemical devices that consume organic substrates in order for the electrogenic bacteria and/or enzyme cultures to produce electricity and simultaneously lower the environmental hazardous value of waste such as COD. The utilization of organic waste as fuels in MFCs has opened a new research path for testing a variety of by-products from several industry sectors. This review presents several organic waste substrates that can be employed as fuels in MFCs for bioenergy generation and the effect of their usage on power density, COD (chemical oxygen demand) removal, and Coulombic efficiency enhancement. Moreover, a demonstration and comparison of the different types of mixed waste regarding their efficiency for energy generation via MFCs are presented. Future perspectives for manufacturing and cost analysis plans can support scale-up processes fulfilling waste-treatment efficiency and energy-output densities.

Nutrient removal and recovery from wastewater by microbial fuel cell-based systems - A review

Microbial fuel cell (MFC) is a green innovative technology that can be employed for nutrient removal/recovery as well as for energy production from wastewater. This paper summarizes the recent advances in the use of MFCs for nutrient removal/recovery. Different configurations of MFCs used for nutrient removal are first described. Different types of nutrient removal/recovery mechanisms such as precipitation, biological uptake by microalgae, nitrification, denitrification and ammonia stripping occurring in MFCs are discussed. Recovery of nutrients as struvite or cattiite by precipitation, as microalgal biomass and as ammonium salts are common. This review shows that while higher nutrient removal/recovery is possible with MFCs and their modifications compared to other techniques as indicated by many laboratory studies, field-scale studies and optimization of operational parameters are needed to develop efficient MFCs for nutrient removal and recovery and electricity generation from different types of wastewaters.

Microbial fuel cell treatment energy-offset for fertilizer production from human urine

Microbial fuel cells (MFCs) are a promising technology for simultaneous wastewater treatment and the biological conversion of organics to electrical energy. Yet effective MFC utilization of complex waste streams like human urine is limited by interference from high-strength organics (>5000 mg L^-1 total organic carbon) and concentrated macronutrients (>500 mg L^-1 nitrogen and phosphorus). This research assesses potential gains in MFC energy performance and organics treatment achieved by incorporating MFCs as a tertiary step in a human urine nutrient recovery system. The bioelectrochemical performance of benchtop-scale, low-cost MFCs was assessed using pre-treated human urine that was depleted in ammonium-nitrogen and phosphate (the "waste bottoms" of the urine nutrient recovery system). Performance of MFCs with waste bottoms as feedstock was compared to MFC performance with hydrolyzed real urine and synthetic urine as feedstocks. MFCs with waste bottoms produced 16.2 ± 14.8 mW m_Cat^-2 (2.14 ± 1.95 W m_Cat^-3), equivalent to 93% of the mean power density achieved by hydrolyzed urine after 32 days of operation. Coulombic efficiency over the full experimental runtime was 32.3 ± 4.1% higher for waste bottoms than urine. Waste bottoms helped avoid fouling of the ceramic membrane separator that occurs with urea hydrolysis and phosphate precipitation from urine. Enhanced ion separation was also observed, producing neutral pH in the anolyte and high pH (11.5) and electrical conductivity (25 dS m^-1) in the catholyte. While several gains in performance were observed when using waste bottoms as feedstock, anolyte organics removal decreased 36.5% in MFCs with waste bottoms. This research indicates that pretreatment of source-separated urine via nutrient removal improves MFC electrical power generation and ion separation.

Microbial Fuel Cell for Energy Production, Nutrient Removal and Recovery from Wastewater: A Review

The world is facing serious threats from the depletion of non-renewable energy resources, freshwater shortages and food scarcity. As the world population grows, the demand for fresh water, energy, and food will increase, and the need for treating and recycling wastewater will rise. In the past decade, wastewater has been recognized as a resource as it primarily consists of water, energy-latent organics and nutrients. Microbial fuel cells (MFC) have attracted considerable attention due to their versatility in their applications in wastewater treatment, power generation, toxic pollutant removal, environmental monitoring sensors, and more. This article provides a review of MFC technologies applied to the removal and/or recovery of nutrients (such as P and N), organics (COD), and bioenergy (as electricity) from various wastewaters. This review aims to provide the current perspective on MFCs, focusing on the recent advancements in the areas of nutrient removal and/or recovery with simultaneous power generation.

Evaluation of a continuous flow microbial fuel cell for treating synthetic swine wastewater containing antibiotics

Microbial fuel cell (MFC) systems are promising technologies for wastewater treatment and renewable energy generation simultaneously. Performance of a double-chamber microbial fuel cell (MFC) to treat synthetic swine wastewater containing sulfonamide antibiotics (SMs) was evaluated in this study. The MFC was operated in continuous modes at different conditions. Results indicated that the current was successfully generated during the operation. The performance of MFC under the sequential anode-cathode operating mode is better than that under the single continuous running mode. Specifically, higher removal efficiency of chemical oxygen demand (>90%) was achieved under the sequential anode-cathode operating mode in comparison with that in the single continuous mode (>80%). Nutrients were also be removed in the MFC's cathode chamber with the maximum removal efficiency of 66.6 ± 1.4% for NH₄⁺-N and 32.1 ± 2.8% for PO₄^3--P. Meanwhile, SMs were partly removed in the sequential anode-cathode operating with the value in a range of 49.4%-59.4% for sulfamethoxazole, 16.8%-19.5% for sulfamethazine and 14.0%-16.3% for sulfadiazine, respectively. SMs' inhibition to remove other pollutants in both electrodes of MFC was observed after SMs exposure, suggesting that SMs exert toxic effects on the microorganisms. A positive correlation was found between the higher NH₄⁺-N concentration used in this study and the removal efficiency of SMs in the cathode chamber. In short, although the continuous flow MFC is feasible for treating swine wastewater containing antibiotics, its removal efficiency of antibiotics requires to be further improved.

Biofilm structure, dynamics, and ecology of an upscaled biocathode wastewater microbial fuel cell

A microbial fuel cell (MFC) system containing modular half-submerged biocathode was operated for 6 months in an 800 L flow-through system with domestic wastewater. For the first time, spatial and temporal differences in biofilm communities were examined on large three-dimensional electrodes in a wastewater MFC. Biocathode microbial community analysis showed a specialized biofilm community with electrogenic and electrotrophic taxa forming during operation, suggesting potentially opposing electrode reactions. The anodic community structure shifted during operation, but no spatial differences were observed along the length of the electrode. Power output from the system was most strongly influenced by pH. Higher power densities were associated with the use of solids-dewatering filtrate with increased organic matter, conductivity, and pH. The results show that the biocathode was the rate-limiting step and that future MFC design should consider the effect of size, shape, and orientation of biocathodes on their community assembly and electrotrophic ability.

Feasibility study on applying the iron-activated persulfate system as a pre-treatment process for clofibric acid selective degradation in municipal wastewater

Clofibric acid (CFA) was selected as an example of the widespread micropollutants in municipal wastewater to investigate the feasibility of the application of an iron-activated persulfate (Fe-PS) system for selective micropollutants removal prior to biological wastewater treatment. In pure CFA solution, the CFA degradation rate was accelerated with an increase in oxidant dosage and 2.15 mg·L^-1 (0.01 mM) CFA could be completed removed within 30 min with 270 mg·L^-1 (1 mM) potassium persulfate (PS) activated by 56 mg·L^-1 iron powder (Fe). Although both sulfate radicals (SO₄^∙-) and hydroxyl radicals (HO^∙) were generated in the Fe-PS system, SO₄^∙- was identified as the dominant oxidant for CFA degradation. To investigate the interference from model compounds in the municipal wastewater, CFA degradation in different concentrations of ammonia or/and glucose solutions, the synthetic municipal wastewater, and real municipal wastewater systems were investigated. A complete removal of CFA was achieved with ammonia or/and glucose interferences. Less than 3% ammonia was removed due to the formation of aminopropyl radicals. About 15% degradation of dissolved organic carbon (DOC) was mainly attributed to the oxidation of glucose by HO^∙, Indicating the excellent selective oxidation ability of the Fe-PS system targeting at CFA over glucose. Even though the alkalinity significantly hindered the oxidation of CFA in both synthetic and real municipal wastewater system, the removal efficiency of CFA was significantly higher than that of DOC. The decrease of CFA removal efficiency in municipal wastewater system comparing to the other tests was due to the slow degradation of PS in the system and further hindered the SO₄^∙- generation. Therefore, the impacts of other impurities in municipal wastewater on the oxidation activities of Fe-PS system should be further investigated. In general, this study confirmed the feasibility of using the Fe-PS system for selective degrading resistant CFA in municipal wastewater.

Response Characteristics of Nitrifying Bacteria and Archaea Community Involved in Nitrogen Removal and Bioelectricity Generation in Integrated Tidal Flow Constructed Wetland-Microbial Fuel Cell

This study explores nitrogen removal performance, bioelectricity generation, and the response of microbial community in two novel tidal flow constructed wetland-microbial fuel cells (TFCW-MFCs) when treating synthetic wastewater under two different chemical oxygen demand/total nitrogen (COD/TN, or simplified as C/N) ratios (10:1 and 5:1). The results showed that they achieved high and stable COD, NH₄ ⁺-N, and TN removal efficiencies. Besides, TN removal rate of TFCW-MFC was increased by 5-10% compared with that of traditional CW-MFC. Molecular biological analysis revealed that during the stabilization period, a low C/N ratio remarkably promoted diversities of ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in the cathode layer, whereas a high one enhanced the richness of nitrite-oxidizing bacteria (NOB) in each medium; the dominant genera in AOA, AOB, and NOB were Candidatus Nitrosotenuis, Nitrosomonas, and Nitrobacter. Moreover, a high C/N ratio facilitated the growth of Nitrosomonas, while it inhibited the growth of Candidatus Nitrosotenuis. The distribution of microbial community structures in NOB was separated by space rather than time or C/N ratio, except for Nitrobacter. This is caused by the differences of pH, dissolved oxygen (DO), and nitrogen concentration. The response of microbial community characteristics to nitrogen transformations and bioelectricity generation demonstrated that TN concentration is significantly negatively correlated with AOA-shannon, AOA-chao, 16S rRNA V4-V5-shannon, and 16S rRNA V4-V5-chao, particularly due to the crucial functions of Nitrosopumilus, Planctomyces, and Aquicella. Additionally, voltage output was primarily influenced by microorganisms in the genera of Nitrosopumilus, Nitrosospira, Altererythrobacter, Gemmata, and Aquicella. This study not only presents an applicable tool to treat high nitrogen-containing wastewater, but also provides a theoretical basis for the use of TFCW-MFC and the regulation of microbial community in nitrogen removal and electricity production.

Novel trickling microbial fuel cells for electricity generation from wastewater

There are two main challenges associated with the scale-up of air-cathode microbial fuel cells (MFCs): performance reduction and cathode leakage/flooding. In this study, a novel 13.4 L reactor that contains 4 tubular MFCs was designed and operated in a trickling mode for 65 days under different conditions. The trickling water flow through the horizontally aligned MFCs alleviated the hydraulic pressure applied to the air-cathodes. With a total cathode working area of over 1700 cm², this reactor generated power densities up to 1 W/m² with coulombic efficiencies over 50% using acetate. Using a brewery waste stream as carbon source, an average power density of 0.27 W/m² was generated with ∼60% COD removal at hydraulic retention time of 1.6 h. The decent performance of this reactor compared with other air-cathode MFCs at the similar scale and the alleviated hydraulic pressure on air-cathodes demonstrate the great potential of this design and operation for future MFC optimization and scaling up.

Bifunctional cathode using a biofilm and Pt/C catalyst for simultaneous electricity generation and nitrification in microbial fuel cells

Biofouling frequently causes catalyst deterioration at the cathode of microbial fuel cells (MFCs). A biofilm-covered Pt/C cathode (BPC) was fabricated via in situ cultivation of a biofilm on a Pt/C cathode (PC) in a dual-chambered MFC, which enables effective removal of NH4+-N and copious generation of electricity. Experimental results show 99% NH4+-N removal by the nitrifying bacteria that constitute 35.7% of all microorganisms on the BPC and a maximum BPC-MFC power density of 0.97 W/m2, which is comparable to that of PC-MFCs (0.99 W/m2). BPC biofilm size is restricted by the limited amount of organic material in the cathode chamber, which constrains the biomass to less than 0.3 g protein /m2. The bifunctional-cathode equipped MFC shows great promise as an energy-saving technology for wastewater treatment in the future.

Performance and inorganic fouling of a submergible 255 L prototype microbial fuel cell module during continuous long-term operation with real municipal wastewater under practical conditions

A submergible 255 L prototype MFC module was operated under practical conditions with municipal wastewater having a large share in industrial discharges for 98 days to investigate the performance of two of the largest, ever investigated multi-panel stainless steel/activated carbon air cathodes (85 × 85 cm). At a flow rate of 144 L/d, power density of 78 mW/m²_Cat (317 mW/m³) and COD, TSS and TN removal of 41 ± 16 %, 36 ± 16 % and 18 ± 14 %, respectively, were reached. Observed Coulombic efficiency and substrate-specific energy recovery were 29.5 ± 14 % and 0.184 ± 0.125 kWh_el/kg_COD,deg, respectively. High salt content of wastewater (TDS = 2.8 g/L) led to severe inorganic fouling causing a drastic decline in power output and energy recovery of more than 90 % in the course of experiments. Mechanical cleaning of the cathodes restored only 22 % (17 mW/m²_Cat) of the power output and did not improve nutrient removal or energy recovery.

Microbial fuel cell for nutrient recovery and electricity generation from municipal wastewater under different ammonium concentrations

In the present study, a dual-compartment microbial fuel cell (MFC) was constructed and continuously operated under different influent concentrations of ammonium-nitrogen (5-40 mg/L). The impacts of ammonium on organics removal, energy output and nutrient recovery were investigated. Experimental results demonstrated that this MFC reactor achieved a CDO removal efficiency of greater than 85%. Moreover, excess ammonium concentration in the feed solution compromises the generation of electricity. Simultaneously, the recovery rate of phosphate achieved in the MFC was insignificantly influenced at the wider influent ammonium concentration. In contrast, a high concentration of ammonium may not be beneficial for its recovery.

Biofouling effects on the performance of microbial fuel cells and recent advances in biotechnological and chemical strategies for mitigation

The occurrence of biofouling in MFC can cause severe problems such as hindering proton transfer and increasing the ohmic and charge transfer resistance of cathodes, which results in a rapid decline in performance of MFC. This is one of the main reasons why scaling-up of MFCs has not yet been successfully accomplished. The present review article is a wide-ranging attempt to provide insights to the biofouling mechanisms on surfaces of MFC, mainly on proton exchange membranes and cathodes, and their effects on performance of MFC based on theoretical and practical evidence. Various biofouling mitigation techniques for membranes are discussed, including preparation of antifouling composite membranes, modification of the physical and chemical properties of existing membranes, and coating with antifouling agents. For cathodes of MFC, use of Ag nanoparticles, Ag-based composite nanoparticles, and antifouling chemicals is outlined in considerable detail. Finally, prospective techniques for mitigation of biofouling are discussed, which have not been given much previous attention in the field of MFC research. This article will help to enhance understanding of the severity of biofouling issues in MFCs and provides up-to-date solutions. It will be beneficial for scientific communities for further strengthening MFC research and will also help in progressing this cutting-edge technology to scale-up, using the most efficient methods as described here.