Investigation into the environmental fate of the combined Insensitive High Explosive constituents 2,4-dinitroanisole (DNAN), 1-nitroguanidine (NQ) and nitrotriazolone (NTO) in soil

Experimental and Computational Study of Pyrogenic Carbonaceous Matter Facilitated Hydrolysis of 2,4-Dinitroanisole (DNAN)

This study investigated the reaction pathway of 2,4-dinitroanisole (DNAN) on the pyrogenic carbonaceous matter (PCM) to assess the scope and mechanism of PCM-facilitated surface hydrolysis. DNAN degradation was observed at pH 11.5 and 25 °C with a model PCM, graphite, whereas no significant decay occurred without graphite. Experiments were performed at pH 11.5 due to the lack of DNAN decay at pH below 11.0, which was consistent with previous studies. Graphite exhibited a 1.78-fold enhancement toward DNAN decay at 65 °C and pH 11.5 relative to homogeneous solution by lowering the activation energy for DNAN hydrolysis by 54.3 ± 3.9%. This is supported by our results from the computational modeling using Car-Parrinello simulations by ab initio molecular dynamics/molecular mechanics (AIMD/MM) and DFT free energy simulations, which suggest that PCM effectively lowered the reaction barriers by approximately 8 kcal mol-1 compared to a homogeneous solution. Quaternary ammonium (QA)-modified activated carbon performed the best among several PCMs by reducing DNAN half-life from 185 to 2.5 days at pH 11.5 and 25 °C while maintaining its reactivity over 10 consecutive additions of DNAN. We propose that PCM can affect the thermodynamics and kinetics of hydrolysis reactions by confining the reaction species near PCM surfaces, thus making them less accessible to solvent molecules and creating an environment with a weaker dielectric constant that favors nucleophilic substitution reactions. Nitrite formation during DNAN decay confirmed a denitration pathway, whereas demethylation, the preferred pathway in homogeneous solution, produces 2,4-dinitrophenol (DNP). Denitration catalyzed by PCM is advantageous to demethylation because nitrite is less toxic than DNAN and DNP. These findings provide critical insights for reactive adsorbent design that has broad implications for catalyst design and pollutant abatement.

Isolation and characterization of nitroguanidine-degrading microorganisms

Nitroguanidine (NQ) is a component of newly developed insensitive munition (IM) formulations which are more resistant to impact, friction, heat, or sparks than conventional explosives. NQ is also used to synthesize various organic compounds and herbicides, and has both human and environmental health impacts. Despite the wide application and associated health concerns, limited information is known regarding NQ biodegradation, and only one NQ-degrading pure culture identified as Variovorax strain VC1 has been characterized. Here, we present results for three new NQ-degrading bacterial strains isolated from soil, sediment, and a lab-scale aerobic membrane bioreactor (MBR), respectively. Each of these strains -utilizes NQ as a nitrogen (N) source rather than as a source of carbon or energy. The MBR strain, identified as Pseudomonas extremaustralis strain NQ5, is capable of degrading NQ at a rate of approximately 150 μmole L-1 h-1 under aerobic conditions with glucose as a sole carbon source - and NQ as a sole N source. The addition of NH4+ to strain NQ5 during active growth with NQ as a sole N source slowed the growth rate for several hours, and the strain released NH4+, presumably from NQ. When NO3- was added as an alternate N source under similar conditions, the NO3- was not consumed, but NH4+ release into the culture medium was again observed. Strain NQ5 was also able to utilize guanylurea, guanidine, and ethyl allophanate as N sources, and - tolerate salt concentrations as high as 4 % (as NaCl). The other two stains, NQ4 and NQ7, both identified as Arthrobacter spp., grew significantly slower than strain NQ5 under similar culture conditions and tolerated only ∼1 % NaCl. In addition, neither strain NQ4 nor strain NQ7 was able to degrade guanlyurea or ethyl allophanate, but each degraded guanidine. These strains, particularly strain NQ5, may have practical applications for in-situ and ex-situ NQ bioremediation.

A Review about the Mycoremediation of Soil Impacted by War-like Activities: Challenges and Gaps

(1) Background: The frequency and intensity of war-like activities (war, military training, and shooting ranges) worldwide cause soil pollution by metals, metalloids, explosives, radionuclides, and herbicides. Despite this environmentally worrying scenario, soil decontamination in former war zones almost always involves incineration. Nevertheless, this practice is expensive, and its efficiency is suitable only for organic pollutants. Therefore, treating soils polluted by wars requires efficient and economically viable alternatives. In this sense, this manuscript reviews the status and knowledge gaps of mycoremediation. (2) Methods: The literature review consisted of searches on ScienceDirect and Web of Science for articles (1980 to 2023) on the mycoremediation of soils containing pollutants derived from war-like activities. (3) Results: This review highlighted that mycoremediation has many successful applications for removing all pollutants of war-like activities. However, the mycoremediation of soils in former war zones and those impacted by military training and shooting ranges is still very incipient, with most applications emphasizing explosives. (4) Conclusion: The mycoremediation of soils from conflict zones is an entirely open field of research, and the main challenge is to optimize experimental conditions on a field scale.

Investigating residue dissolution of insensitive high explosives in two sandy soil types: A predictive modelling approach

The demand for munitions that are less likely to detonate accidentally has led to an increased use of Insensitive High Explosives (IHE), which contain substances like 2,4-dinitroanisole (DNAN) and 5-nitro-1,2,4-triazol-3-one (NTO). These substances have different properties compared to traditional explosives, and their potential environmental impact is not well understood. When these explosives are used in live-fire training exercises, their residues end up in the soil. It is important to determine how these residues dissolve and enter the soil. This study aimed to experimentally measure the rate at which an IHE formulation dissolves when exposed to rainwater with pH levels of 5.0 and 6.5, and to simulate how these residues dissolve and move through two different soil types. The dissolution rates were determined by conducting experiments in which IHE particles (30-60 mg) were exposed to water with varying pH levels and temperatures. The results showed that the dissolution rate of NTO did not vary with pH, while the dissolution rate of DNAN and RDX decreased with decreasing pH. Specifically, the dissolution rate of DNAN decreased from 18 ± 40 μg min-1 at pH 6.5 to 6 ± 4 μg min-1 at pH 5.0, while the dissolution rate of RDX decreased from 8 ± 4 to 3 ± 1 μg min-1. These findings were used to develop a stochastic model that successfully simulated the concentration of IHE in the leachate from soil columns over time. A sensitivity analysis revealed that while dissolution rates determined the amount of mass entering the soil, they did not significantly regulate the amount of mass that migrated through the soil and leached out of the soil columns.

Persistence of 2,4,6-triamino-1,3,5-trinitrobenzene in the environment

2,4,6-triamino-1,3,5-trinitrobenzene (TATB) is an Insensitive High Explosive (IHE) that is increasingly being used as a safer alternative to traditional energetic materials. However, the high thermal stability of TATB poses challenges for its disposal, particularly through existing open burning methods and its ability to remain in the environment for long period of time. Therefore, this study investigated the persistence of TATB in the environment by conducting small-scale experiments which were designed to examine the resistance of TATB to open burning and to assess unburnt residues. To evaluate the fate and transport of the unburnt materials in soil, laboratory-scale soil column transport studies were conducted to gauge the movement of TATB through soil. The results indicate that TATB exhibits a high resistance to burning, leaving unburnt materials that can persist in soil. The study emphasizes the importance of efficient disposal methods for explosives and highlights the need for further research to understand the environmental impact and toxicity of TATB.

Evaluation of a sequential anaerobic-aerobic membrane bioreactor system for treatment of traditional and insensitive munitions constituents

New energetic formulations containing insensitive high explosives (IHE), such as 2,4-dinitroanisole (DNAN), 3-nitro-1,2,4-triazole-5-one (NTO), and nitroguanidine (NQ) are being developed to provide safer munitions. The addition of IHE to munitions formulations results in complex wastewaters from explosives manufacturing, load and pour operations and demilitarization activities. New technologies are required to treat those wastewaters. The core objective of this research effort was to develop and optimize a dual anaerobic-aerobic membrane bioreactor (MBR) system for treatment of wastewater containing variable mixtures of traditional energetics, IHE, and anions. The combined system proved highly effective for treatment of traditional explosives (TNT, RDX, HMX), IHE (DNAN, NTO, NQ) and anions commonly used as military oxidants (ClO4-, NO3-). The anaerobic MBR, which was operated for more than 500 d, was observed to completely degrade mg L-1 concentrations of TNT, DNAN, ClO4- and NO3- under all operational conditions, including at the lowest hydraulic residence time (HRT) tested (2.2 d). The combined system generally resulted in complete treatment of mg L-1 concentrations of RDX and HMX to <20 μg L-1, with most of the degradation occurring in the anaerobic MBR and polishing in the aerobic system. No common daughter products of DNAN, TNT, RDX, or HMX were detected in the effluent. NTO was completely transformed in the anaerobic MBR, but residual 3-amino-1,2,4-triazole-5-one (ATO) was detected in system effluent. The ATO rapidly decomposed when bleach solution was added to the final effluent. NQ was initially recalcitrant in the system, but microbial populations eventually developed that could degrade >90% of the ∼10 mg L-1 NQ entering the anaerobic MBR, with the remainder degraded to <50 μg L-1 in the aerobic system. The dual MBR system proved to be capable of complete degradation of a wide mixture of munitions constituents and was resilient to changing influent composition.

Evaluating the effect of insensitive high explosive residues on soil using an environmental quality index (EQI) approach

The environmental impact of Insensitive High Explosive (IHE) detonation residues to soil quality was assessed using a series of outdoor soil mesocosms. Two different soils were used including a pristine sandy soil and a land-degraded soil collected from a training range. Both soils were spiked with an IHE mixture comprised of 53 % NTO, 32 % DNAN and 15 % RDX at three different concentrations 15, 146 and 367 mg/kg respectively. The concentration levels were derived from approximate residues from 100 detonations over a 2 week training period. A set of five physico-chemical and biological indicators representative of the two soils were selected to develop environmental quality indexes (EQI). It was found that none of the concentrations tested for the pristine soil affected the chemical, biological and physical indicators, suggesting no decrease in soil quality. In contrast, the EQI for the degraded soil was reduced by 24 %, mainly due to a decrease in the chemical and biological components of the soil. Therefore, it is concluded that depending on the soil health status, IHE residues can have minor or severe consequences on soil health. Further studies are needed to determine the environmental impact of IHE on soil and water especially in the case where a larger number of detonations are more likely to be carried out on a training range.

Elucidating the mechanisms associated with the anaerobic biotransformation of the emerging contaminant nitroguanidine

Nitroguanidine (NQ) is a constituent of gas generators for automobile airbags, smokeless pyrotechnics, insecticides, propellants, and new insensitive munitions formulations applied by the military. During its manufacture and use, NQ can easily spread in soils, ground, and surface waters due to its high aqueous solubility. Very little is known about the microbial biotransformation of NQ. This study aimed to elucidate important mechanisms operating during NQ anaerobic biotransformation. To achieve this goal, we developed an anaerobic enrichment culture able to reduce NQ to nitrosoguanidine (NsoQ), which was further abiotically transformed to cyanamide. Effective electron donors for NQ biotransformation were lactate and, to a lesser extent, pyruvate. The results demonstrate that the enrichment process selected a sulfate-reducing culture that utilized lactate as its electron donor and sulfate as its electron acceptor while competing with NQ as an electron sink. A unique property of the culture was its requirement for exogenous nitrogen (e.g., from yeast extract or NH₄Cl) for NQ biotransformation since NQ itself did not serve as a nitrogen source. The main phylogenetic groups associated with the NQ-reducing culture were sulfate-reducing and fermentative bacteria, namely Cupidesulfovibrio oxamicus (63.1% relative abundance), Dendrosporobacter spp. (12.0%), and Raoultibacter massiliens (10.9%). The molecular ecology results corresponded to measurable physiological properties of the most abundant members. The results establish the conditions for NQ anaerobic biotransformation and the microbial community associated with the process, improving our present comprehension of NQ environmental fate and assisting the development of NQ remediation strategies.

Adsorption and Removal Kinetics of 2,4-Dinitroanisole and Nitrotriazolone in Contrasting Freshwater Sediments: Batch Study

Environmental release of 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO) is of great concern due to high migration potential in the environment. In the present study we evaluated the adsorption and microbially-mediated removal kinetics of dissolved DNAN and NTO in contrasting freshwater sediments with different total organic carbon (TOC) content. River sand (low TOC), pond silt (high TOC), clay-rich lake sediment (low TOC), wetland silt (high TOC), carbonate sand (low TOC), and iron-rich clay (low TOC) were evaluated. Separate abiotic and biotic bench-top sediment slurry incubations were carried out at 23, 15, and 4 °C for DNAN and NTO. Experiments were conducted over 3 weeks. Time series aqueous samples and sediment samples collected at the end of the experiment were analyzed for DNAN and NTO concentrations. The DNAN compound equilibrated with sediment within the first 2 h after addition whereas NTO showed no adsorption. 2,4-Dinitroanisole adsorbed more onto fine-grained organic-rich sediments (K_d  = 2-40 L kg^-1  sed^-1 ) than coarse-grained organic-poor sediments (K_d  = 0.2-0.6 L kg^-1  sed^-1 ), and the TOC content and cation exchange capacity of sediment were reliable predictors for abiotic DNAN adsorption. Adsorption rate constants and equilibrium partitioning constants for DNAN were inversely proportional to temperature in all sediment types. The biotic removal half-life of DNAN was faster (t_1/2  = 0.1-58 h) than that of NTO (t_1/2  = 5-347 h) in all sediment slurries. Biotic removal rates (t_1/2  = 0.1-58 h) were higher than abiotic rates (t_1/2  = 0.3-107 h) for DNAN at 23 °C. Smaller grain size coupled with higher TOC content enhanced biotic NTO and DNAN removal in freshwater environments. Environ Toxicol Chem 2023;42:46-59. © 2022 SETAC.

Synergistic Effects of IMX-104 Components in Membrane Absorption: A Computational Study

New insensitive munitions such as IMX-104 formulations are being developed to improve the safety suffering from accidental stimulations. Experimental data indicated the synergistic toxicity of 2,4-dinitroanisole (DNAN) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in IMX-104, which increased the concern about its environmental and health threats. Indeed, little is known about the synergistic mechanism. Here, we investigated the membrane absorption of DNAN and RDX as the first step toward uncovering synergistic toxicity. The permeability coefficient, transmembrane time, and liposome-water partition coefficient were calculated by the umbrella sampling technique. The results show that component RDX in the IMX-104 formulation promotes the membrane absorption of another more toxic component DNAN, suggesting that the synergistic toxicity effect of IMX-104 may emerge from their membrane adsorption stage. In detail, the integrating free-energy curves show that DNAN, RDX, or their mixture in membranes would promote subsequent molecules passing through membranes. For the mixture of DNAN and RDX, RDX was absorbed by the membrane before DNAN. Postabsorbed DNAN tends to stay around RDX, which is due to the strong van der Waals (VDW) interaction between them. RDX stabilized under phospholipid headgroups limits the overflow of DNAN from the membrane, which results in 11% more absorption of DNAN by the membrane than in the case of the pure DNAN system.

Reductive transformation of the insensitive munitions compound nitroguanidine by different iron-based reactive minerals

Nitroguanidine (NQ) is an emerging contaminant being used by the military as a constituent of new insensitive munitions. NQ is also used in rocket propellants, smokeless pyrotechnics, and vehicle restraint systems. Its uncontrolled transformation in the environment can generate toxic and potentially mutagenic products, posing hazards that need to be remediated. NQ transformation has only been investigated to a limited extent. Thus, it is crucial to expand the narrow spectrum of NQ remediation strategies and understand its transformation pathways and end products. Iron-based reactive minerals should be investigated for NQ treatment because they are successfully used in existing technologies, such as permeable reactive barriers, for treating a wide range of organic pollutants. This study tested the ability of micron-sized zero-valent iron (m-ZVI), mackinawite, and commercial FeS, to transform NQ under anoxic conditions. NQ transformation followed pseudo-first-order kinetics. The reaction rate constants decreased as follows: commercial FeS > mackinawite > m-ZVI. For the assessed minerals, the NQ transformation started with the reduction of the nitro group forming nitrosoguanidine (NsoQ). Then, aminoguanidine (AQ) was accumulated during the reaction of NQ with m-ZVI, accounting for 86% of the nitrogen mass recovery. When NQ was reacted with commercial FeS, 45% and 20% of nitrogen were recovered as AQ and guanidine, respectively, after 24 h. Nonetheless, NsoQ persisted, contributing to the N-balance. When mackinawite was present, NsoQ disappeared, but AQ was not detected, and guanidine accounted for 11% of the nitrogen recovery. AQ was ultimately transformed into cyanamide, whose dimerization triggered the formation of cyanoguanidine. Alternatively, NsoQ was transformed into guanidine, which reacted with cyanamide to form biguanide. This is the first report systematically investigating the NQ transformation by different iron-based reactive minerals. The evidence indicates that these minerals are attractive alternatives for developing NQ remediation strategies.

Designing bacterial consortia for the complete biodegradation of insensitive munitions compounds in waste streams

Insensitive munitions compounds (IMCs), such as 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO), are replacing conventional explosives in munitions formulations. Manufacture and use of IMCs generate waste streams in manufacturing plants and load/assemble/pack facilities. There is a lack of practical experience in executing biodegradation strategies to treat IMCs waste streams. This study establishes a proof-of-concept that bacterial consortia can be designed to mineralize IMCs and co-occurring nitroaromatics in waste streams. First, DNAN, 4-nitroanisole (4-NA), and 4-chloronitrobenzene (4-CNB) in a synthetic DNAN-manufacturing waste stream were biodegraded using an aerobic fluidized-bed reactor (FBR) inoculated with Nocardioides sp. JS 1661 (DNAN degrader), Rhodococcus sp. JS 3073 (4-NA degrader), and Comamonadaceae sp. LW1 (4-CNB degrader). No biodegradation was detected when the FBR was operated under anoxic conditions. Second, DNAN and NTO were biodegraded in a synthetic load/assemble/pack waste stream during a sequential treatment comprising: (i) aerobic DNAN biodegradation in the FBR; (ii) anaerobic NTO biotransformation to 3-amino-1,2,4-triazol-5-one (ATO) by an NTO-respiring enrichment; and (iii) aerobic ATO mineralization by an ATO-oxidizing enrichment. Complete biodegradation relied on switching redox conditions. The results provide the basis for designing consortia to treat mixtures of IMCs and related waste products by incorporating microbes with the required catabolic capabilities.

Removal of munition constituents in stormwater runoff: Screening of native and cationized cellulosic sorbents for removal of insensitive munition constituents NTO, DNAN, and NQ, and legacy munition constituents HMX, RDX, TNT, and perchlorate

Technologies are needed to address contamination with energetic compounds at military installations. This research developed and evaluated novel and sustainable materials that can be used to remove munition constituents (MC) from stormwater runoff. Initial work focused on 3-nitro-1,2,4-triazol-5-one (NTO), as it is both highly soluble and ionized at environmentally relevant pH values. Screening cellulosic materials indicated that cationized (CAT) versions of pine shavings (pine, henceforth) and burlap (jute) demonstrated >70% removal of NTO from artificial surface runoff. CAT materials also demonstrated >90% removal of the anionic propellant perchlorate. NTO removal (~80%) by CAT pine was similar across initial pH values from 4 to 8.5 S.U. An inverse relationship was observed between NTO removal and the concentration of the major anions chloride, nitrate, and sulfate due to competition for anion binding sites. Sorption isotherms were performed using a mixture of the three primary legacy explosives (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), hexahydro-1,3,5-trinitro-s-triazine (RDX), 2,4,6-trinitrotoluene (TNT)), the three insensitive MC (nitroguanidine (NQ), NTO, 2,4-dinitroanisole (DNAN)), and perchlorate. Isotherm results indicated that effective removal of both legacy and insensitive MC would best be achieved using a mixture of peat moss plus one or more of the cationized cellulosic materials.

A novel electrochemical sensor for nitroguanidine determination using a glassy carbon electrode modified with multi-walled carbon nanotubes and polyvinylpyrrolidone

The GC/PVP/MWCNTs electrode is the first electrode for the electrochemical determination of insensitive explosive nitroguanidine using intermolecular hydrogen bonding interactions.

Accumulation of Insensitive Munition Compounds in the Earthworm Eisenia andrei from Amended Soil: Methodological Considerations for Determination of Bioaccumulation Factors

The present study investigates the bioaccumulation of the insensitive munition compounds 2,4-dinitroanisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO), developed for future weapons systems to replace current munitions containing sensitive explosives. The earthworm Eisenia andrei was exposed to sublethal concentrations of DNAN or NTO amended in Sassafras sandy loam. Chemical analysis indicated that 2- and 4-amino-nitroanisole (2-ANAN and 4-ANAN, respectively) were formed in DNAN-amended soils. The SumDNAN (sum of DNAN, 2-ANAN, and 4-ANAN concentrations) in soil decreased by 40% during the 14-d exposure period. The SumDNAN in the earthworm body residue increased until day 3 and decreased thereafter. Between days 3 and 14, there was a 73% decrease in tissue uptake that was greater than the 23% decrease in the soil concentration, suggesting that the bioavailable fraction may have decreased over time. By day 14, the DNAN concentration accounted for only 45% of the SumDNAN soil concentration, indicating substantial DNAN transformation in the presence of earthworms. The highest bioaccumulation factor (BAF; the tissue-to-soil concentration ratio) was 6.2 ± 1.0 kg/kg (dry wt) on day 3 and decreased to 3.8 ± 0.8 kg/kg by day 14. Kinetic studies indicated a BAF of 2.3 kg/kg, based on the earthworm DNAN uptake rate of 2.0 ± 0.24 kg/kg/d, compared with the SumDNAN elimination rate of 0.87 d^-1 (half-life = 0.79 d). The compound DNAN has a similar potential to bioaccumulate from soil compared with trinitrotoluene. The NTO concentration in amended soil decreased by 57% from the initial concentration (837 mg NTO/kg dry soil) during 14 d, likely due to the formation of unknown transformation products. The bioaccumulation of NTO was negligible (BAF ≤ 0.018 kg/kg dry wt). Environ Toxicol Chem 2021;40:1713-1725. © 2021 SETAC. This article has been contributed to by US Government employees and their work is in the public domain in the USA.

Alkaline hydrolysis pathway of 2,4-dinitroanisole verified by 18O tracer experiment

The environmental fate of insensitive munitions compounds, such as 2,4-dinitroanisole (DNAN), has drawn increasing attention because of their growing use in military activities. One of the main attenuation mechanisms of DNAN degradation in aqueous environments is alkaline hydrolysis. We investigated the pathway for alkaline hydrolysis of DNAN at pH 12 by a combined approach of experiment and theory. An experiment using ¹⁸O-labeled water was performed to verify the reaction pathway. Calculated free energies for two putative reaction pathways by density-functional theory optimized at the SMD(Pauling)/M06-2X/6-311++G(2d,2p) level including explicit solvation of DNAN by 10 H₂O molecules and one OH^- ion gave a prediction in agreement with the experimental result. The verified reaction pathway for alkaline hydrolysis of DNAN is a S_N2Ar nucleophilic aromatic substitution with a methoxy leaving group (OCH₃) at the C1 site.

Adsorption behaviour of 1,3,5-trinitroperhydro-1,3,5-triazine, 2,4-dinitroanisole and 3-nitro-1,2,4-triazol-5-one on commercial activated carbons

Insensitive high explosives are increasingly being used to replace more sensitive formulations, however large quantities of environmentally hazardous wastewater are generated from loading, assembling and packing processes. Currently, there is limited literature regarding the treatment of wastewater contaminated with these hazardous insensitive high explosive materials such as 1,3,5-trinitroperhydro- 1,3,5-triazine (RDX), 2,4-dinitoranisole (DNAN) and 3-nitro-1,2,4-triazol-5-one (NTO). The preferred method of explosive wastewater treatment is adsorption by activated carbon, usually through treatment columns or fluidised beds that are simple to operate and cost effective. The aim of this research was to assess whether commercially available activated carbons would be suitable and economically viable to treat explosive wastewater containing RDX, DNAN and NTO. Bottle point tests were used to determine adsorption capacity and adsorption kinetics for the individual insensitive high explosives with three different activated carbons. Equilibrium data were fitted to the Langmuir, Freundlich and Temkin isotherms to determine the mechanisms of adsorption. Six hour bottle point tests for a mixture of the three insensitive high explosive constituents were used to consider possible preferential adsorption. As expected, RDX and DNAN were adsorbed at concentrations up to 40 mg.L-1 and 150 mg.L-1 respectively by the activated carbons tested, demonstrating the viability of treatment by adsorption. However, at the high concentrations of NTO expected in wastewater (1400 mg.L-1) activated carbons were rapidly saturated, suggesting that treatment of NTO contaminated wastewater would require prohibitively large quantities of activated carbon compared to RDX and DNAN.

Interpol review of detection and characterization of explosives and explosives residues 2016-2019

This review paper covers the forensic-relevant literature for the analysis and detection of explosives and explosives residues from 2016-2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/Resources/Documents#Publications.

Surface enhanced Raman scattering substrate for the detection of explosives: Construction strategy and dimensional effect

Surface-enhanced Raman spectroscopy (SERS) technology has been reported to be able to quickly and non-destructively identify target analytes. SERS substrate with high sensitivity and selectivity gave SERS technology a broad application prospect. This contribution aims to provide a detailed and systematic review of the current state of research on SERS-based explosive sensors, with particular attention to current research advances. This review mainly focuses on the strategies for improving SERS performance and the SERS substrates with different dimensions including zero-dimensional (0D) nanocolloids, one-dimensional (1D) nanowires and nanorods, two-dimensional (2D) arrays, and three-dimensional (3D) networks. The effects of elemental composition, the shape and size of metal nanoparticles, hot-spot structure and surface modification on the performance of explosive detection are also reviewed. In addition, the future development tendency and application of SERS-based explosive sensors are prospected.

The effect of soil type on the extraction of insensitive high explosive constituents using four conventional methods

Explosive contamination is commonly found at military and manufacturing sites (Hewitt et al., 2005; Clausen et al., 2004; Walsh et al., 2013). Under current environmental legislation the extent of the contamination must be characterized by soil sampling and subsequent separation of the explosive contaminants from the soil matrix by extraction to enable chemical analysis and quantification (Dean, 2009). It is essential that the extraction method can consistently recover explosive residue from a variety of soil types i.e. all materials that have not degraded or irreversibly bound to the matrix, so that any resultant risk is not underestimated. In this study, five different soil types with a range of organic content, particle size and pH, were spiked with a mixture of RDX, DNAN, NQ and NTO at 50 mg/kg and were extracted using one of four one-step extraction methods: stirring, shaking, sonication, and accelerated solvent extraction (ASE). Analysis of the extraction efficiencies of the four methods found that they were broadly successful for the extraction of all IHE constituents from all five soils (an average of 84% ± 14% recovery across 80 extractions). However, soils with high organic content (Total Organic Content (TOC) ≥ 2%) were found to significantly affect extraction efficiency and reproducibility. NTO and DNAN were the least consistent in extraction efficiency with poorest recovery of NTO as low as 37% ± 2%. Of the four tested methods shaking was found to be the most reproducible, though less efficient than stirring (64%-91%). ASE was found to have the most variable results for extraction of IHE constituents suggesting that ASE was the most affected by the different soil types. Therefore, it is recommended that the efficiency and reproducibility of the selected extraction method should be validated by extracting known concentrations of the IHE from the soil of interest and that any required correction factors are reported.