Efficient removal of Cd2+ and Pb2+ from aqueous solution with amino- and thiol-functionalized activated carbon: Isotherm and kinetics modeling

New Insights into Aggregation Behaviors of the UV-Irradiated Dissolved Biochars (DBioCs) in Aqueous Environments: Effects of Water Chemistries and Variation in the Hamaker Constant

The aggregation behavior of ubiquitous dissolved black carbon (DBC) largely affects the fate and transport of its own contaminants and the attached contaminants. However, the photoaging processes and resulting effects on its colloidal stability remain yet unknown. Herein, dissolved biochars (DBioCs) were extracted from common wheat straw biochar as a proxy for an anthropogenic DBC. The influences of UV radiation on their aggregation kinetics were systematically investigated under various water chemistries (pH, electrolytes, and protein). The environmental stability of the DBioCs before and after radiation was further verified in two natural water samples. Hamaker constants of pristine and photoaged DBioCs were derived according to Derjaguin-Landau-Verwey-Overbeek (DLVO) prediction, and its attenuation (3.19 ± 0.15 × 10-21 J to 1.55 ± 0.07 × 10-21 J after 7 days of radiation) was described with decay kinetic models. Pearson correlation analysis revealed that the surface properties and aggregation behaviors of DBioCs were significantly correlated with radiation time (p < 0.05), indicating its profound effects. Based on characterization and experimental results, we proposed a three-stage mechanism (contended by photodecarboxylation, photo-oxidation, and mineral exposure) that DBioCs might experience under UV radiation. These findings would provide an important reference for potential phototransformation processes and relevant behavioral changes that DBC may encounter.

Enhanced adsorption of Pb2+ by the oxygen-containing functional groups enriched activated carbon

Lead is one of the primary pollutants found in water and poses significant toxicity risks to humans; thus, it is necessary to investigate techniques for removing it economically and efficiently. In order to enhance the removal capacity of Pb2+, coconut shell-based activated carbon (AC) was modified with introducing oxygen-containing functional groups (OFGs) via nitric acid (HNO3) or hydrogen peroxide (H2O2) modification in this study. The characterization results show that after oxidation treatment, the content of OFGs increased, and the textural properties of the samples do not change significantly. This indicates that the modification conditions used in this study effectively introduced OFGs while avoiding the adverse effects on physical adsorption ability of AC caused by oxidation treatment. The Pb2+ adsorption capacities of the AC modified with 10 M HNO3 and 30 wt.% H2O2 were 4.26 and 3.64 times that of the pristine AC, respectively. The experimental data can be well fitted using the Langmuir isotherm model and the Elovich kinetic model, suggesting that the adsorption of Pb2+ on AC belongs to single-layer adsorption, and chemical adsorption dominates the adsorption process. In summary, the hydrothermal-assisted HNO3/H2O2-modified coconut shell-based AC shows great potential in efficiently removing Pb2+ from solutions, offering a solution for utilizing coconut shell waste.

Tetraethylenepentamine-Grafted Amino Terephthalic Acid-Modified Activated Carbon as a Novel Adsorbent for Efficient Removal of Toxic Pb(II) from Water

In this study, a new composite, tetraethylenepentamine (TEPA), was incorporated into amino terephthalic acid-modified activated carbon (ATA@AC) through a one-pot integration of TEPA with the COOH moiety of ATA@AC. This process resulted in the creation of a TEPA@ATA@AC composite for Pb(II) removal from an aquatic environment. Several techniques, including SEM, EDX, FT-IR, TGA, XRD, and Zeta potential, were employed to emphasize the chemical composition, morphology, and thermal durability of the as-synthesized TEPA@ATA@AC composite. The impact of experimental variables on the adsorption of Pb(II) ions was studied using batch adsorption. The uptake assessment suggested that the TEPA@ATA@AC composite exhibited superior Pb(II) removal performance with high removal efficiency (97.65%) at pH = 6.5, dosage = 0.02 g, equilibrium time = 300 min, and temperature = 298 K. The isotherm data exhibited good conformity with the Langmuir isotherm model, whereas the kinetics data displayed strong agreement with both pseudo-first-order and pseudo-second-order kinetics models. This reflected that the Pb((II) uptake by the TEPA@ATA@AC composite was caused by physisorption coupled with limited chemisorption. The greatest monolayer uptake capacity of the TEPA@ATA@AC composite was 432.8 mg/g. The thermodynamic findings indicated that the Pb(II) uptake on the TEPA@ATA@AC composite was an exothermic and feasible process. After five adsorption-desorption runs, the TEPA@ATA@AC composite maintained a superior uptake capacity (83.80%). In summary, the TEPA@ATA@AC composite shows promise as a potent adsorbent for effectively removing Cr(VI) from contaminated water, with impressive removal efficiency.

Artificial intelligence application in adsorption of uremic toxins: Towards the eco-friendly design of highly efficient with potential applications as hemodialysis membranes

Six Functionalized Activated Carbon Cloths (FACCs) were designed to obtain fundamental information for training a Bayesian Regularized Artificial Neural Network (BRANN) capable of predicting adsorption capacity of the FACCs to synthesize tailor-made materials with potential application as dialysis membranes. Characterization studies showed that FACCs have a high surface area (1354-2073 m2 g-1) associated with increased microporosity (W0, average: 0.57 cm3 g-1). Materials are carbonaceous, with a carbon content between 69 and 92%. Chemical treatments modify the pHpzc of materials between 4.1 and 7.8 due to incorporating functional groups on the surface (C=O, -COOH, -OH, -NH, -NH2). Uremic toxins tests showed a high elimination rate of p-cresol (73 mg g-1) and creatinine (90 mg g-1) which is not affected by the matrix (aqueous solution and simulated serum). However, in the case of uric acid, adsorption capacity decreased from 143 mg g-1 to 71 mg g-1, respectively. When comparing the kinetic constants of the adsorption studies in simulated serum versus the studies in aqueous solution, it can be seen that this does not undergo significant changes (0.02 min-1), evidencing the versatility of the material to work in different matrices. The previous studies, in combination with characterization of the materials, allowed to establish the adsorption mechanism. Thus, it permitted to train the BRANN to obtain mathematical models capable to predict the kinetic adsorption of the toxins studied. It is concluded that the predominant adsorption mechanism is due to π-π interactions between the adsorbate unsaturations with the material's pseudo-graphitic planes. Results show that FACCs are promising materials for hemodialysis membranes. Finally, taking into consideration the adsorption capacities and rates, as well as the semiquantitative analysis of the environmental impact associated with the preparation of the adsorbents, the best adsorbent (CC, Eco-Scale = 91.5) was selected. The studies presented show that the material is eco-friendly and highly efficient in the elimination of uremic toxins.

Selective, rapid extraction of uranium from aqueous solution by porous chitosan-phosphorylated chitosan-amidoxime macroporous resin composite and differential charge calculation

Herein, a new porous chitosan-phosphorylated chitosan-amidoxime macroporous resin composite (PCAR) was designed and synthesized for the rapid and selective extraction of uranium resources from aqueous solution. This study showed that PCAR exhibited excellent adsorption toward uranium in a pH range of 5-9. The dynamic adsorption process aligned with the quasi-second-order kinetic model and corresponded to the chemical adsorption process. The maximum adsorption capacity was 561.28 mg·g-1 at pH 6 and 308 K. Mechanism analysis showed that the synergistic effect of the amidoxime group (-(NH2)C=N-OH), PO, and -NH2 on the PCAR surface improved the uranium adsorption performance. The differential charge density indicated that the amidoxime and phosphate groups provide lone-pair electrons for the adsorption of UO22+ and their synergistic effect improves the UO22+ adsorption performance of PCAR. The uranium distribution coefficients of PCAR and CAR are 4.6 and 2.4 times those of vanadium, respectively. These results indicate that phosphorylation can ameliorate the disadvantage of competitive vanadium adsorption of the amidoxime adsorbent. In addition, PCAR exhibits good reusability and stable adsorption capacity after five adsorption-desorption cycles. Hence, PCAR has excellent potential for uranium extraction from aqueous solution.

A Comparison of a Conventional Chemical Coagulant and a Natural Coagulant Derived from Cassia fistula Seeds for the Removal of Heavy Metal Ions

Cassia fistula seed-derived coagulant has been reported to exhibit high coagulating-flocculating activity, environmental friendliness, and cost-effectiveness for the wastewater treatment, especially of textile wastewater. For heavy metal removal, however, research focusing on evaluating the feasibility of this material is still limited. Therefore, this study reports jar-test experiments in which the Zn2+ and Ni2+ removal efficiency of C. fistula coagulant was assessed. Moreover, a comparison of coagulation performance using a conventional chemical coagulant and the natural coagulant was performed. Characterization of the C. fistula seed-derived coagulant revealed the presence of important functional groups and fibrous networks with rough surfaces. A bench-scale study indicated that the coagulation performance of the two coagulants depends strongly on the initial concentration of metal ions, pH level, and coagulant dosage. The C. fistula seed-derived coagulant was found to possess higher removal efficiency than polyaluminum chloride. This natural coagulant removed over 80% of metal ions at the optimal conditions of pH 5.0, a metal ion concentration of 25 ppm, and a dosage of 0.8 and 1.6 g/L for Zn2+ and Ni2+, respectively. This study shows that C. fistula seed-derived coagulant is a potential alternative to chemical coagulants and could be developed to provide an environmentally friendly, economical, and efficient wastewater treatment.

Magnetic Biochar Derived from Fenton Sludge/CMC for High-Efficiency Removal of Pb(II): Synthesis, Application, and Mechanism

Magnetic biochar composites (MBC) were developed by a simple one-step pyrolysis method using Fenton sludge waste solid and carboxymethyl cellulose sodium. Detailed morphological, chemical, and magnetic characterizations corroborate the successful fabrication of MBC. Batch adsorption experiments show that the synthesized MBC owns high-efficiency removal of Pb(II), accompanied by ease-of-separation from aqueous solution using magnetic field. The experiment shows that the equilibrium adsorption capacity of MBC for Pb(II) can reach 199.9 mg g^-1, corresponding to a removal rate of 99.9%, and the maximum adsorption capacity (q_m) reaches 570.7 mg g^-1, which is significantly better than that of the recently reported magnetic similar materials. The adsorption of Pb(II) by MBC complies with the pseudo second-order equation and Langmuir isotherm model, and the adsorption is a spontaneous, endothermic chemical process. Investigations on the adsorption mechanism show that the combination of Pb(II) with the oxygen-containing functional groups (carboxyl, hydroxyl, etc.) on biochar with a higher specific surface area are the decisive factors. The merits of reusing solid waste resource, namely excellent selectivity, easy separation, and simple preparation make the MBC a promising candidate of Pb(II) purifier.

Enhanced Cr (VI) removal with Pb (II) presence by Fe2+-activated persulfate and zero-valent iron system

Combined heavy metals such as chromium (Cr (VI)) and lead (Pb (II)) in natural water have globally posed severe environmental and public health risk. Here the removal of Cr (VI) and Pb (II) mixed pollutants using Fe²⁺-activated persulfate (PS) with extra zero-valent iron (ZVI), which was not only a supplementary Fe²⁺ source, but also a high-efficiency absorbent, was investigated. During removal, pivotal factors of initial pollutant concentration, dosages of ZVI and PS, initial pH and temperatures were examined. Interestingly, generating a lot of H⁺ in the process of Fe (II) activating persulfate were helpful to the corrosion of ZVI over a large range of pH (1-9). Under the optimum condition, removal efficiency of Pb (II) and Cr (VI) have reached 100% and 94.26% respectively. The removal mechanism was suggested as a three-step reaction that the Pb (II) boosted the removal of Cr (VI) by co-precipitated in wastewater, and the Pb (II) and Cr (VI) were adsorbed and subsequently reduced to Pb⁰ and Cr³⁺ as Cr(OH)₃ or Cr³⁺-Fe³⁺ hydroxides on ZVI surface. Cr (VI) and Pb (II) adsorption kinetics agreed with the pseudo-second-order reaction rate expression. In addition, we were surprised to found that the contribution effect of chromium and lead co-precipitation for their removal by Fe (II) - PS-ZVI has strong dependence on initial pH and concentration ratio of Cr (VI) and Pb (II). The result indicated that Fe (II)-PS-ZVI system should be a favourable removal technology for Cr (VI) and Pb (II).

Prediction of heavy metals adsorption by hydrochars and identification of critical factors using machine learning algorithms

Hydrochar has become a popular product for immobilizing heavy metals in water bodies. However, the relationships between the preparation conditions, hydrochar properties, adsorption conditions, heavy metal types, and the maximum adsorption capacity (Q_m) of hydrochar are not adequately explored. Four artificial intelligence models were used in this study to predict the Q_m of hydrochar and identify the key influencing factors. The gradient boosting decision tree (GBDT) showed excellent predictive capability for this study (R²=0.93, RMSE=25.65). Hydrochar properties (37%) controlled heavy metal adsorption. Meanwhile, the optimal hydrochar properties were revealed, including the C, H, N, and O contents of 57.28-78.31%, 3.56-5.61%, 2.01-6.42%, and 20.78-25.37%. Higher hydrothermal temperatures (>220 °C) and longer hydrothermal time (>10 h) lead to the optimal type and density of surface functional groups for heavy metal adsorption, which increased the Q_m values. This study has great potential for instructing industrial applications of hydrochar in treating heavy metal pollution.

Mussel-inspired magnetic adsorbent MnO2/PDA@Fe3O4 for removing heavy metal ions contaminants in single and mixed systems

Heavy metal pollution has been a magnificent concern for a long period. A novel magnetic material, MnO₂/PDA@Fe₃O₄, was prepared in this paper. With the assistance of multiple characterization methods, it was confirmed that polydopamine coated the magnetic nucleus and acted as a dense intermediate layer for MnO₂ attachment. Having superior adsorption performance, MnO₂/PDA@Fe₃O₄ could remove heavy metal cations efficiently no matter in single or mixed systems. The maximum adsorption capacities calculated by the Langmuir model for Pb(II), Cu(II), and Cd(II) were 295.01 mg/g, 130.30 mg/g, and 115.16 mg/g, respectively. In mixed systems, the adsorbent showed obvious selectivity for Pb(II). And the variation of Cu(II) concentration was more responsible for Pb(II) adsorption than that of Cd(II). The kinetic and thermodynamic data revealed that the polluted ions immobilizations by MnO₂/PDA@Fe₃O₄ were chemisorption and were endothermic, entropy increase, spontaneous process. The presence of humic acid and coexisting ions induced only a very limited interference. In addition, MnO₂/PDA@Fe₃O₄ maintained excellent adsorption performance and stability after five cycles of adsorption and removed 98.33% Pb(II) and 71.24% Cu(II) from actual water, respectively. This study confirmed that the MnO₂/PDA@Fe₃O₄ had great potential and broad prospects to remediate the heavy metal contaminants in water.

Performance and mechanism of Pb2+ and Cd2+ ions’ adsorption via modified antibiotic residue-based hydrochar

This study investigated the hydrochar-based porous carbon prepared by combining the technical route of hydrothermal carbonization (HTC) + chemical activation. The hydrochar morphology was adjusted by changing the activation reaction conditions and adding metal salts. Experiments showed that the activation of KHCO₃ significantly increased the specific surface area and pore size of the hydrochar. Besides, oxygen-rich groups on the surface of the activated hydrochar interacted with heavy metal ions to achieve efficient adsorption. The activated hydrothermal carbon adsorption capacity for Pb²⁺ and Cd²⁺ ions reached 289 and 186 mg/g, respectively. The adsorption mechanism study indicated that the adsorption of Pb²⁺ and Cd²⁺ was related to electrostatic attraction, ion exchange, and complexation reactions. The "HTC + chemical activation" technology was environmentally friendly and effectively implemented antibiotic residues. Carbon materials with high adsorption capacity can be prepared so that biomass resources can be utilized with excessive value, as a consequence presenting technical assistance for the comprehensive disposal of organic waste in the pharmaceutical industry and establishing a green and clean production system.

Two recyclable and complementary adsorbents of coal-based and bio-based humic acids: High efficient adsorption and immobilization remediation for Pb(II) contaminated water and soil

Humic acid can effectively bind heavy metals and is a promising remediation agent for heavy metals-contaminated water and soil. Many successful applications of humic acid have been reported, but rarely studied the specific process and mechanism of heavy metal removal by humic acids from water and soil, especially the simultaneous application of coal-based and bio-based humic acids. In this work, two kinds of coal-based and bio-based humic acid materials (CHA and BHA) from weathered coal and rice husk were industrially produced and studied their Pb(II) adsorption and immobilization characteristics and mechanisms in water and soil. The batch adsorption experiments obtained the Pb(II) adsorption by CHA and BHA both were spontaneous and endothermic monolayer chemisorption and controlled by three rate-limiting steps (bulk, film, and pore) in the adsorption process. CHA and BHA had highly efficient Pb(II) adsorption capacities, obtained their maximum adsorption capacity was 201 and 188 mg g^-1, respectively. In addition to the two main adsorption mechanisms of ion exchange and surface complexation, electrostatic interaction, precipitation reaction, and π-π interaction were also involved. Soil culture experiments showed that CHA and BHA both exhibited a highly efficient immobilization effect on Pb(II)-contaminated soil, and CHA and BHA had a better synergistic promotion effect. Compared with the CK soil, the content of DTPA-Pb(II) decreased by 10.2-13.2% and the content of RES-Pb(II) increased by 14-22% in soils treated with different humic acids. Ion exchange, complexation, precipitation, and electrostatic attraction promote the transformation of unstable Pb(II) to stable Pb(II), which was of great significance for the immobilization of Pb(II) in soil. Overall, CHA and BHA have the potential to be used as green, efficient, and promising adsorbents to remove and immobilize Pb(II) from wastewater and soil.

Overlooked mechanism of Pb immobilization on montmorillonite mediated by dissolved organic matter in manure compost

In this study, three kinds of dissolved organic matter (DOM) derived from fresh chicken manure (FDOM), immature compost (IDOM) and mature compost (MDOM) were employed to compare their effects on Pb adsorption onto montmorillonite (MMT). The potential mechanism was revealed by characterization of mineral structure and calculation of interface force. The results demonstrated that the adsorption capacity (q_max) of Pb onto MMT was decreased by 14.3% and 29.8% in the presence of FDOM and IDOM, respectively, while increased by 44.4% in the presence of MDOM, resulting from the release or co-adsorption of DOM-Pb complexes. Parallel factor (PARAFAC) further indicated that Pb mainly bound to protein-like substances in FDOM and IDOM, and fulvic-like in MDOM. The X-ray diffraction (XRD) analysis proved that MDOM-Pb complex had a stronger ability to enter into the interlayer of MMT. The van der Waals force dominated the adsorption of FDOM-Pb and IDOM-Pb, while ligand exchange was involved in the case of MDOM-Pb. This study provided a comprehensive insight into the geochemical behavior of livestock manure and its compost as well as their interactions with heavy metal and soil mineral.

Layered Double Hydroxides Derived from MIL-88A(Fe) as an Efficient Adsorbent for Enhanced Removal of Lead (II) from Water

The efficient removal of lead (II) from aqueous solution remains a big problem and the development of novel nanomaterials as adsorbents by various technologies to solve this problem is promising. This study contributed a novel nanostructure of MIL-88A-layered double hydroxides (LDHs) as the adsorbent for Pb²⁺, which was synthesized by a two-step solvothermal method with MIL-88A(Fe) as the precursor. The as-prepared material featured a chestnut-like core-shell structure, and exhibited excellent removal performance towards Pb²⁺ from water in comparison to MIL-88A(Fe) and LDHs (directly synthesized). The adsorption of Pb²⁺ by the MIL-88A-LDHs conformed to the pseudo-second-order kinetic model and the Langmuir and Freundlich isotherm models. The maximal adsorption capacity was 526.32, 625.00, and 909.09 mg g^-1 at 278, 298, and 318 K, respectively. The thermodynamic parameters suggested that the adsorption was an endothermic, entropy-increasing, and spontaneous reaction. X-ray photoelectron spectroscopy (XPS) analysis indicated that the surface complexation was mostly responsible for Pb²⁺ elimination. The MIL-88A-LDHs can be readily regenerated and showed good cyclic performance towards Pb²⁺. Thus, the as-prepared MIL-88A-LDHs may hold promise for the elimination of aqueous heavy metals.

Efficient adsorption of Cr(VI) in acidic environment by nano-scaled schwertmannite prepared through pH regulation: characteristics, performances, and mechanism

Acidic Cr(VI)-containing wastewater has received increasing attention in recent years. Schwertmannite is a suitable adsorbent for its acid resistance and good adsorption ability. However, it shows poor Cr(VI) adsorption performance under acidic conditions. Herein, inspired by the fast neutralization-mineralization process of acid mine drainage (AMD) triggered by alkaline rocks, a novel nano-scaled schwertmannite (Sch-2.7) with high Cr(VI) adsorption capacity was synthesized at constant pH of 2.7 via adding OH^-. Compared with common schwertmannite (Sch), appropriate OH^- effectively improved mineral yield (the precipitation efficiency of Fe: 96.75% vs. 29.93%), specific surface area (65.1 m²/g vs. 18.9 m²/g), surface group content, and further Cr(VI) adsorption ability of Sch-2.7. The maximum adsorption capacity was 54.17 (pH = 3), 61.59 (pH = 4), and 66.5 mg/g (pH = 5) for Sch-2.7, whereas only 20.35, 24.51, and 27.17 mg/g for Sch. On average, the former was 2.53 times higher than the latter. Temperature and coexisting ions had little influences on the sorption process of Sch-2.7. The mechanism analysis demonstrated that the Cr(VI) removal by Sch-2.7 was a more thermodynamic favorable process due to abundant reactive-active components on Sch-2.7 for adsorption reaction. This work provided new insight into performance optimization and application potential on Cr(VI) removal of schwertmannite.

Two-step modification (sodium dodecylbenzene sulfonate composites acid-base) of sepiolite (SDBS/ABsep) and its performance for remediation of Cd contaminated water and soil

To enhance the remediation capability of cadmium (Cd) polluted water and soil, our approach involved two-step modification of sepiolite (Sep) through acid-base compound treatment and sodium dodecylbenzene sulfonate (referring as SDBS/ABsep), and then the batch adsorption and soil culture experiments were conducted to investigate its immobilization potential and mechanisms of Cd. The findings revealed that the SDBS/ABsep had a rougher surface and higher porosity, and the maximum adsorption capacity of Cd²⁺ onto SDBS/ABsep was 241.39 mg g^-1, which was 5.32 times higher than that on Sep. It conformed to the pseudo-second-order kinetic and Redlich-Paterson isotherm models. SDBS/ABsep exhibited a high efficiency for immobilization-induced remediation of Cd polluted soils. Upon the addition of different concentrations of SDBS/ABsep, DTPA-Cd content decreased by 17.41-47.33% compared with the control groups, and the ratio of residual fraction-Cd increased from 4.67% in unamended soil to 14.05% in the presence of 4% SDBS/ABsep. SEM-EDS, TEM, FTIR, XRD, and XPS analyses indicated that the interaction mechanisms between SDBS/ABsep and Cd included the electrostatic force, precipitation, ion exchange, and complexation of sulfonic acid groups. Therefore, SDBS/ABsep can be used as a promising effective passivation agent for remediation of Cd contaminated soil and water.

A critical review with emphasis on recent pieces of evidence of Moringa oleifera biosorption in water and wastewater treatment

The increasing demand for using competent and inexpensive methods based on biomaterials, like adsorption and biosorption, has given rise to the low-priced alternative biosorbents. In the past few years, Moringa oleifera (MO) has emerged as a green and low-priced biosorbent for the treatment of contaminated waters with heavy metals and dyes, and given its availability, we can create another generation of effective biosorbents based on different parts of this plant. In this review paper, we have briefed on the application of MO as a miraculous biosorbent for water purification. Moreover, the primary and cutting-edge methods for the purification and modification of MO to improve its adsorption are discussed. It was found that MO has abundant availability in the regions where it is grown, and simple chemical treatments increase the effectiveness of this plant in the treatment of some toxic contaminants. The different parts of this miraculous plant's "seeds, leaves, or even husks" in their natural form also possess appreciable sorption capacities, high efficiency for treating low metal concentrations, and rapid adsorption kinetics. Thus, the advantages and disadvantages of different parts of MO as biosorbent, the conditions favorable to this biosorption, also, the proposal of a logical mechanism, which can justify the high efficiency of this plant, are discussed in this review. Finally, several conclusions have been drawn from some important works and which are examined in this review, and future suggestions are proposed.

Photocatalytic degradation of persistent organic pollutants by Co-Cl bond reinforced CoAl-LDH/Bi12O17Cl2 photocatalyst: mechanism and application prospect evaluation

The widespread distribution of persistent organic pollutants (POPs) in natural waters has aroused global concern due to their potential threat to the aquatic environment. Photocatalysis represents a promising mean to remediate polluted waters with the simple assistance of solar energy. Herein, we fabricated a Co-Cl bond reinforced CoAl-LDH/Bi₁₂O₁₇Cl₂ heterogeneous photocatalyst to investigate the feasibility of photocatalysis to treat POPs-polluted water under environmental conditions. The optimum CoAl-LDH/Bi₁₂O₁₇Cl₂ (5-LB) composite photocatalyst exhibited excellent photocatalytic performance, which could degrade 92.47 % of ciprofloxacin (CIP) and 95 % of bisphenol A (BPA) with 2h of actual solar light irradiation in Changsha, China (N 28.12 °, E 112.59 °). In view of the synergistic influence of water constituents, various water matrices greatly affected the degradation rate of CIP (BPA), with the degradation efficiency of 82.17% (84.37%) in tap water, 69.67% (71.63%) in wastewater effluent, and 44.07% (67.7%) in wastewater inflow. The results of electron spin resonance, and chemical trapping experiment, HPLC-MS and density functional theory calculation reflected that the degradation of CIP was mainly attributed to h⁺ and ¹O₂ attacking the active atoms of CIP molecule with high Fukui index. Furthermore, the non-toxicity of both 5-LB photocatalyst and treated CIP solution was proved by E.coli and B.subtilis cultivation, which further demonstrated the feasibility of the 5-LB to treat POPs in real water under irradiation of solar light.

Comparison of Adsorption Capacity and Removal Efficiency of Strontium by Six Typical Adsorption Materials

The rapid development and application of nuclear technology have been accompanied by the production of large amounts of radioactive wastes, of which Sr is a typical nuclide. In this study, six typical materials with strong adsorption properties, namely activated carbon, kaolin, montmorillonite, bentonite, zeolite, and attapulgite, were selected. Their adsorption mechanisms were investigated by analyzing their adsorption isotherms, adsorption kinetics, micromorphologies, element contents, specific surface areas, crystal structures, and functional groups. The results showed that the adsorption efficiency of Sr by the six adsorbents can be ranked as zeolite, bentonite, attapulgite, montmorillonite, activated carbon, and kaolin, among which the maximum adsorption capacity of zeolite was 4.07 mg/g. Based on the adsorption kinetic and thermodynamic fitting results, the adsorption of Sr by zeolites, bentonite and attapulgite is consistent with Langmuir model, the pseudo-first-order and pseudo-second-order model, and the adsorption process of Sr (II) by montmorillonite, activated carbon and kaolinite is consistent with the Freundlich model and corresponds to non-uniform adsorption. The main mechanisms of the six materials are physical adsorption, ion exchange and complexation. In summary, zeolite, bentonite, and attapulgite, especially zeolite, are highly effective for the treatment of radioactive wastewater containing strontium and have great application value in the treatment of radioactive wastes.

Functionalized porous nanoscale Fe3O4 particles supported biochar from peanut shell for Pb(II) ions removal from landscape wastewater

The large amounts ofheavy metal from landscape wastewater have become serious problems of environmental pollution and risks for human health. The development of efficient novel adsorbent is a very important for treatment of heavy metal. The functionalized porous nanoscale Fe₃O₄ particles supported biochar from peanut shell (PS-Fe₃O₄) for removal of Pb(II) ions from aqueous solution was investigated. The characterization of PS-Fe₃O₄ composites showed that biochar was successfully coated with porous nanoscale Fe₃O₄ particles. The pseudo second-order kinetic model and Langmuir model were more fitted for describing the adsorption process of Pb(II) ions in solution. The adsorption process of Pb(II) ions removal by PS-Fe₃O₄ composites was a spontaneous and endothermic process. The adsorption mechanisms of Pb(II) ions by PS-Fe₃O₄ composites were mainly controlled by the chemical adsorption process. The maximum adsorption capacity of Pb(II) ions removal in solution by PS-Fe₃O₄ composites reached 188.68 mg/g. The removal mechanism included Fe-O coordination reaction, co-precipitation, complexation reaction, and ion exchange. PS-Fe₃O₄ composites were thought as a low-cost, good regeneration performance, and high efficiency adsorption material for removal of Pb(II) ions in solution.

Preparation of carbonyl, hydroxyl, and amino-functionalized microporous carbonaceous nanospheres from syrup-based waste to remove sulfamethazine

Sulfadiazine (SDZ) was a persistent sulfonamide antibiotic with a potential risk to human health. The waste dipping syrup was considered useless and environmentally unfriendly solution. In this work, carbonyl-, hydroxyl-, and amino-functionalized microporous carbonaceous nanospheres were synthesized using waste dipping syrup with glucose, fructose, and nitrogen, which was used as precursor for hydrothermal and pyrolysis process. The products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transformed infrared spectroscopy (FTIR), the point of zero charge (PZC), Xray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET). The carbonaceous nanospheres with large BET surface area (924.528 m²/g), micropores (2.127 nm), and high micro-porosity (89.54 %) allowed the rapid diffusion of SDZ (0.512nm×0.738 nm) into micropores of nanospheres. The majority SDZ (initial concentration = 20 mg/L) was removed (>96.8%) in the presence of 1.0 g/L nanoparticles after 40-min reaction at pH = 6.0. The adsorption capacity of SDZ onto nanospheres was 96.6 mg/g. The adsorption kinetic and equilibrium followed pseudo-first-order model and Langmuir isotherm, respectively. The intra-particle diffusion model indicated a three-step adsorption process. In addition, the regenerated nanospheres could be reused over four recycles. The optimal fabrication was realized at lower hydrothermal and pyrolysis temperature of 180 °C and 400 °C, respectively, which involved no additional chemical activating agent and had a high yield (70.8 %). Collectively, hydroxylation, carboxylation, amination, large specific surface area, and multi-microporosity may be responsible for improved adsorption performance of SDZ onto nanospheres. The findings provided a novel pathway for SDZ-loading wastewater treatment using waste syrup.

Triazine-Based Functionalized Activated Carbon Prepared from Water Hyacinth for the Removal of Hg2+, Pb2+, and Cd2+ Ions from Water

A novel chelating adsorbent, based on the functionalization of activated carbon (AC) derived from water hyacinth (WH) with melamine thiourea (MT) to form melamine thiourea-modified activated carbon (MT-MAC), is used for the effective removal of Hg²⁺, Pb²⁺, and Cd²⁺ from aqueous solution. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) theory confirm the successful functionalization of AC with the melamine thiourea chelating ligand through the amidation reaction between the carboxyl groups of oxidized activated carbon (OAC) and the amino groups of melamine thiourea (MT) in the presence of dicyclohexylcarbodiimide (DCC) as a coupling agent. The prepared MT-MAC exhibited extensive potential for the adsorption of the toxic metal ions Hg²⁺, Pb²⁺, and Cd²⁺ from wastewater. The MT-MAC showed high capacities for the adsorption of Hg²⁺ (292.6 mg·g^-1), Pb²⁺ (237.4 mg·g^-1), and Cd²⁺ (97.9 mg·g^-1) from aqueous solution. Additionally, 100% removal efficiency of Hg²⁺ at pH 5.5 was observed at very low initial concentrations (25-1000 ppb).The experimental sorption data could be fitted well with the Langmuir isotherm model, suggesting a monolayer adsorption behavior. The kinetic data of the chemisorption mechanism realized by the melamine thiourea groups grafted onto the activated carbon surface have a perfect match with the pseudo-second-order (PSO) kinetic model. In a mixed solution of metal ions containing 50 ppm of each ion, MT-MAC showed a removal of 97.0% Hg²⁺, 68% Pb²⁺, 45.0% Cd²⁺, 17.0% Cu²⁺, 7.0% Ni²⁺, and 5.0% Zn²⁺. Consequently, MT-MAC has exceptional selectivity for Hg²⁺ ions from the mixed metal ion solutions. The MT-MAC adsorbent showed high stability even after three adsorption-desorption cycles. According to the results obtained, the use of the MT-MAC adsorbent for the adsorption of Pb²⁺, Hg²⁺, and Cd²⁺ metal ions from polluted water is promising.

Passivation of multiple heavy metals in lead-zinc tailings facilitated by straw biochar-loaded N-doped carbon aerogel nanoparticles: Mechanisms and microbial community evolution

Heavy metal (HM) soil pollution has become an increasingly serious problem with the development of industries. Application of biochar in HMs remediation from contaminated environment has attracted considerable research attention during the past decade. Although the mechanism of HMs passivation with biochar has been investigated, effects and mechanisms of interaction among soil-indigenous microbes and novel carbon matrix composites for HMs adsorption and passivation are still unclear. Four different biochar-loaded aerogels, namely, BNCA-1-600, BNCA-1-900, BNCA-2-600, and BNCA-2-900, were synthesized in this study. Adsorption capacity of four kinds of synthetic materials and two types of contrast biochars (BC600 and BC900) to HMs in aqueous solution, passivation capacity of HMs in soil, and effects on soil organic matter and microbial community were explored. Results showed that BNCA-2-900 exhibits excellent adsorption property and a maximum removal capacity of 205.07 mg·g^-1 at 25 °C for Pb(II), 105.56 mg·g^-1 for Cd(II), and 137.89 mg·g^-1 for Zn(II). Leaching concentration of HMs in contaminated soil can meet the national standard of China (GB/T 5085.3-2007) within 120 days. Results of this study confirmed that the additive BNCA-2-900 and coexistence of indigenous microorganisms can effectively reduce bioavailability of HMs. Another potential mechanism may be to remove the passivation of HMs by porous structure and surface functional groups as well as improve the content of organic matter and microbial abundance. The research results may provide a novel perceptive for the development of functional materials and strategies for eco-friendly and sustainable multiple HMs remediation in contaminated soil and water by using a combination of carbon matrix composites and soil-indigenous microorganisms.

Modification of naturally abundant resources for remediation of potentially toxic elements: A review

Water and soil contamination due to potentially toxic elements (PTEs) represents a critical threat to the global ecosystem and human health. Naturally abundant resources have significant advantages as adsorbent materials for environmental remediation over manufactured materials such as nanostructured materials and activated carbons. These advantages include cost-effectiveness, eco-friendliness, sustainability, and nontoxicity. In this review, we firstly compare the characteristics of representative adsorbent materials including bentonite, zeolite, biochar, biomass, and effective modification methods that are frequently used to enhance their adsorption capacity and kinetics. Following this, the adsorption pathways and sites are outlined at an atomic level, and an in-depth understanding of the structure-property relationships are provided based on surface functional groups. Finally, the challenges and perspectives of some emerging naturally abundant resources such as lignite are examined. Although both unamended and modified naturally abundant resources face challenges associated with their adsorption performance, cost performance, energy consumption, and secondary pollution, these can be tackled by using advanced techniques such as tailored modification, formulated mixing and reorganization of these materials. Recent studies on adsorbent materials provide a strong foundation for the remediation of PTEs in soil and water. We speculate that the pursuit of effective modification strategies will generate remediation processes of PTEs better suited to a wider variety of practical application conditions.

Dithiocarbamate modification of activated carbon for the efficient removal of Pb(ii), Cd(ii), and Cu(ii) from wastewater

Proposed adsorption mechanisms: ion exchange and chelation.

Microscopic mechanism about the selective adsorption of Cr(VI) from salt solution on nitrogen-doped carbon aerogel microsphere pyrolysis products

A series of nitrogen-doped carbon aerogels (NCAs) were obtained through phase reaction polymerization and different carbonization temperatures to enhance adsorption efficacy of hexavalent chromium (Cr[VI]) from wastewater significantly. Factors that influence adsorption properties of carbon aerogel microspheres toward Cr(VI), such as pH, adsorbent content, initial Cr(VI) concentrations, and coexisting anion, were investigated. Three isotherm (Langmuir, Freundlich, and Sips) and three kinetic (pseudofirst-order, pseudosecond-order, and Elovich) models were used to interpret the adsorption process. The adsorption capacity of Cr(VI) reached 180.62 mg·g^-1, which was superior to that of most aerogel adsorbents. In addition to the adsorption effect, the XPS results also showed that N-containing groups on the NCA surface reduce the adsorbed Cr(VI) to the less toxic Cr(III). The prepared sorbent demonstrates a negligible loss in adsorption capacity after 6 cycles. NCAs show acceptable application prospects in selective removal of Cr(VI) ions.

Cu(II) and Cd(II) removal from aqueous solution with LDH@GO-NH2 and LDH@GO-SH: kinetics and probable mechanism

Two novel adsorbents (LDH@GO-NH2 and LDH@GO-SH) were successfully synthesized by grafting thiol- or amino-functionalized GO onto LDH and their adsorption capacities for heavy metal ions (Cu(II) and Cd(II)) were significantly enhanced. Characterization experiments illustrated that the thiol group (-SH) or amino group (-NH2) was grafted onto LDH@GO-NH2 or LDH@GO-SH. Adsorption isotherms were satisfactorily fitted by both Langmuir and Freundlich models. The maximum adsorption capacity of Cd(II) on LDH@GO-SH at 308 K was 102.77 mg/g, which was about triple that of LDH@GO-NH2. The enhancement in adsorption capacity of LDH@GO-SH was due to the cooperative effect of LDH and GO-SH. The kinetic experimental data for LDH@GO-NH2 and LDH@GO-SH were found to be in good agreement with the pseudo-second-order model. The thermodynamic parameters calculated from the temperature-dependent adsorption isotherms indicated that the adsorption was spontaneous and an endothermic process. The possible adsorption mechanisms comprising formation of precipitation, isomorphic substitution of Mg(II), and formation of complexation with amino groups or thiol groups were proposed. Desorption experiments put into evidence that LDH@GO-NH2 and LDH@GO-SH may be promising suitable candidates for the remediation of metal ions from aqueous solutions in real work in the near future.

Efficient Gold Recovery from Cyanide Solution Using Magnetic Activated Carbon

Activated carbon has been used for gold recovery in the gold mining industry commercially for decades. The high specific surface area and porosity, good affinity to aurocyanide ions, and abundant resources make activated carbon an efficient and economical material for the adsorption of aurocyanide. However, the separation of activated carbon from the slurry is usually a challenge, and the adsorption rate of activated carbon is limited by the coarse particle size. Herein, a simple and sustainable way to recover gold from cyanide solution using magnetic activated carbon synthesized via a solvothermal method has been developed. The synthesized magnetic activated carbon possesses good magnetism (44.57 emu/g) and specific surface area equal to 249.7 m²/g. The magnetic activated carbon showed 99.1% recovery efficiency of gold from 10 mg/L solution within 5 h, which is much faster compared to the commercial granular activated carbon, and the magnetic activated carbon can be easily separated from the solution with an external magnet. The adsorption ability of this magnetic activated carbon has been tested under different conditions in the cyanide solution, the adsorption isotherm and kinetics are also investigated. The magnetic activated carbon was also recycled in the adsorption-desorption tests and showed good reusability.

Biologically produced sulfur as a novel adsorbent to remove Cd2+ from aqueous solutions

Biological desulfurization processes of landfill gas yield an enormous amount of biologically produced S (BPS) as a byproduct. Capability of BPS to remove Cd²⁺ from aqueous solutions was tested and its removal efficiency was compared to that of granular activated carbon (GAC). Kinetics of Cd²⁺ removal by BPS was a two-stage process with an initial rapid adsorption showing 45% of initial Cd²⁺ was removed within 5 min, followed by a slower adsorption. Cadmium adsorption onto the BPS fitted the Langmuir isotherm model and maximum adsorption capacity of the BPS (63.3 mg g^-1) was 1.8 times higher than that of GAC (36.1 mg g^-1). Thermodynamic parameters showed that Cd²⁺ adsorption by BPS was favorable and endothermic. Data from XPS proved the main adsorption mechanism to be complexation of Cd²⁺ with sulfides in the BPS. Results demonstrated that BPS can be recycled as a novel adsorbent for Cd²⁺ removal from wastewater.

Ultra-high mechanical property and multi-layer porous structure of amidoximation ethylene-acrylic acid copolymer balls for efficient and selective uranium adsorption from radioactive wastewater

Adsorption uranium [U(VI)] from U-containing radioactive wastewater (URW) is a critical strategy for solving the resource shortage and environmental pollution in pace with the sustainable development of nuclear energy. However, the URW universally exhibits acidity and contains co-existing metal ions with high concentration. Herein, the amidoximation ethylene-acrylic acid copolymer balls (EAA-AO) with aciduric and super-high mechanical property were successfully synthesized through grafting diaminomaleonitrile and further treatment of amidoximation. Significantly, the mechanical properties of EAA-AO were not affected by the grafting process and maintained super-high mechanical properties. Furthermore, the -NH₂ and unreacted -CN groups in diaminomaleonitrile adjusted the pK_a to make the optimal pH be 4. In addition, the microstructure of EAA-AO was transformed from the original dense to multi-layer porous structure, which promoted the mass transfer process and the contact between uranyl ions (UO₂²⁺) and internal adsorption active sites. The adsorption capacity of EAA-AO was about 1.78 times that of EAA at pH = 4, and the adsorption capacity for U(VI) was about 8.17 times that of Ba²⁺ with the second highest adsorption capacity. Therefore, the EAA-AO exhibited ultra-high adsorption performance (q_e = 3.196 mg g^-1) in the artificial radioactive wastewater, laying a good foundation for subsequent large-scale industrial adsorption of U(VI) in nuclear industrial wastewater.

Production and beneficial impact of biochar for environmental application: A comprehensive review

This review focuses on a holistic view of biochar, production from feedstock's, engineering production strategies, its applications and future prospects. This article reveals a systematic emphasis on the continuation and development of biochar and its production methods such as Physical engineering, chemical and bio-engineering techniques. In addition, biochar alternatives such as nutrient formations and surface area made it a promising cheap source of carbon-based products such as anaerobic digestion, gasification, and pyrolysis, commercially available wastewater treatment, carbons, energy storage, microbial fuel cell electrodes, and super-capacitors repair have been reviewed. This paper also covers the knowledge blanks of strategies and ideas for the future in the field of engineering biochar production techniques and application as well as expand the technology used in the circular bio-economy.

Chemical fractionation of copper and zinc after addition of carrot pulp biochar and thiourea-modified biochar to a contaminated soil

In this study, there is presented a thorough investigation of the effect of biochar produced via pyrolysis of carrot pulp with pre and post-modification by thiourea (CH₄N₂S) at three rates (0, 4%, and 8%) on fractionation of Cu and Zn in acidic soil. The sequential extraction procedure of BCR was utilized for the determination of heavy metals fractionation. According to the FTIR analysis, the thiourea-modified biochar (TMB) had more surface functional groups in comparison with the carrot pulp biochar (CB). The 8% TMB application, was more effective in increasing the CEC, pH, EC, and SOC of the soil than the 8% CB treatment. The BCR test revealed that after the addition of CB and TMB, the acid extractable Cu and Zn decreased considerably. Thiourea-modified biochar was more effective than pristine biochar in decreasing the acid extractable metals fraction. The addition of TMB induced the conversion of the acid extractable fraction of Cu to residual and organic matter bound fractions, and the acid extractable fraction of Zn to residual, organic matter bound and oxides bound fractions. This work suggests that thiourea-modified biochar can be a low-cost and effective amendment for immobilizing Cu and Zn in contaminated acidic soils.

Preparation and Characterization of Chabazite from Construction Waste and Application as an Adsorbent for Methylene Blue

Construction waste, produced from building projects, was utilized to prepare chabazite by alkali fusion hydrothermal synthesis method. The synthesized chabazite was used as an adsorbent for the removal of methylene blue (MB). XRD, FTIR, and N2 adsorption/desorption curves were adopted to describe the physical and chemical properties of the samples. The results show that the synthesized chabazite possesses crystalline structure, typical functional groups, and large specific surface area of 421.34 m2 g-1. Adsorption isotherms and kinetic curves show that the adsorption process follows the Langmuir model and pseudo-second-order kinetics model. The maximum adsorption capacity of MB on the synthesized chabazite reaches up to 129.18 mg g-1 at 298 K, which is about 16 times that of construction waste. The removal rate of MB reaches more than 90%, and the adsorbed amount is about 35 mg g-1 after 1 h at 298 K. Thermodynamic parameters, namely $\Delta H$ , $\Delta S$ , and $\Delta G$ of -12.83 kJ mol-1, -27.37 J mol-1 K-1, and -4.68 kJ mol-1 at 298 K, respectively, indicate that the adsorption of MB on the chabazite is physical, orderliness-tended, and spontaneous process. Moreover, the synthesized chabazite has a good property of regeneration and reuse. The results indicate that using construction waste to prepare chabazite in application as an adsorbent is feasible, which provides a novel and environment-friendly way for recycling construction waste.

Facile activation of sludge-based hydrochar by Fenton oxidation for ammonium adsorption in aqueous media

Lately, there has been a growing interest in converting low-cost biomass residuals, including wastewater sludge, into char-like materials for various applications. In this research, ammonium (NH₄⁺) adsorption and desorption potential of hydrochar activated via Fenton oxidation were systematically investigated. Hydrochar was prepared from domestic wastewater treatment plant sludge and activated by Fenton oxidation using different H₂O₂ concentrations, H₂O₂/Fe²⁺ ratios, and activation times. The activated hydrochars (AHs) were characterized by ATR-FTIR, high-resolution XPS, BET specific surface area, and SEM, and their NH₄⁺ adsorption capacity was analyzed. The NH₄⁺ adsorption isotherms and kinetics, adsorption in the presence of competing ions (with and without humic acid), and NH₄⁺ desorption were investigated. The results show that following hydrochar activation, the acidic groups' concentration and the BET surface area increased, but the morphology remained essentially unchanged. It was also found that the activation occurs within a few minutes when using a relatively low concentration of reagents, and without extensive post-treatment steps. The NH₄⁺ adsorption onto AH at equilibrium fitted the Langmuir isotherm model, with a maximum adsorption capacity of 30.77 mg g^-1, and the NH₄⁺ adsorption kinetics fitted the pseudo-second-order model. NH₄⁺ adsorption in the presence of competing ions decreased by up to 33 ± 3%. NH₄⁺ desorption experiments demonstrated that NH₄⁺ recovery can reach 33 ± 5% with ultrapure water and 67 ± 2% with 2 M KCl. The results of this study indicate that Fenton oxidation is a promising alternative for hydrochar activation, and can be used as an adsorbent for NH₄⁺ remediation in wastewater treatment processes.

Efficient removal of diethyl dithiocarbamate with EDTA functionalized electrolytic manganese residue and mechanism exploration

The recycling of solid wastes is obligable as it can reduce the environmental pollution and prevent the diffusion of secondary pollution. In this study, a novel cheap adsorbent was prepared by modifying electrolytic manganese residue (EMR) with EDTA. The maximum adsorption capacity of adsorbents for diethyl dithiocarbamate (DDTC) was 133.46 mg/g under initial pH of 7.32 at room temperature. Adsorption kinetics study revealed the DDTC adsorption on EDTA-EMR is mainly controlled by chemisorption and isotherm studies implied the adsorption is a monolayer process. Mechanism exploration found that the DDTC molecules could enter into the holes of EDTA-EMR, and the transition metal-based sorption sites were crucial for the target molecule immobilization and chelation. High pH value (> 10) was found to have inhibited the adsorption capacity of adsorbent, which should be due to the fact that the decreasing of functional groups on adsorbents surface and the competition between DDTC and OH^-. The ionic strength has negligible effect on the adsorption and the as-synthesized adsorbents showed excellent performance after five cycles. The overall results reveal that EDTA-EMR is a promising adsorbent ascribed by its low cost, good recyclability and excellent adsorption capacity.

Red mud for the efficient adsorption of U(VI) from aqueous solution: Influence of calcination on performance and mechanism

Iron-rich red mud is a potent radioactive drainage treatment material. However, the calcite in red mud attenuates its U adsorption capacity by restricting U adsorption onto adsorbent; it captures U as a dissociative complex in aqueous systems. This study produced macroporous iron and carbon combined calcined red mud (ICRM) and carbon calcined red mud (CRM) through calcination in the range of 500-800 °C. XRD results revealed that both series generated advantageous magnetite and calcite were fully decomposed. SEM and batch experiments highlighted ICRM calcined at 600 °C has more stable and favorable performance. The components of post-adsorption ICRM remained active, as demonstrated by FT-IR results. Additionally, ICRM@600 displayed superior U adsorption capacity (59.45 mg/g) than did all red mud adsorbents from our previous research. Zeta-potential results revealed ICRM has positive potential charges in acidic conditions, indicating it adsorbs U(VI) ions via electrostatic attraction. The main adsorption mechanisms of ICRM are surface electrostatic attraction, physical adsorption by porous structure, and chemical adsorption by active Al and Fe components. In application, ICRM@600 obtained a 82.20% U adsorption ratio in uranium mine pit drainage. Overall, this study offers theoretical guidances to radioactive drainage management and red mud reuse.

A regenerable ion-imprinted magnetic biocomposite for selective adsorption and detection of Pb2+ in aqueous solution

A regenerable ion-imprinted magnetic biocomposite (IIMB) was successfully synthesized for simultaneous removal of Pb²⁺ using Serratia marcescens and carboxymethyl chitosan (CMC) as functional carriers, Pb²⁺ was utilized as the imprinted ion, while Fe₃O₄ served as the magnetic component. The structure and properties of IIMB were characterized by various techniques. The adsorption kinetics, isotherms and thermodynamics were applied to interpret the Pb²⁺ adsorption process on IIMB. The results showed the IIMB possessed prominent uptake ability toward Pb²⁺. The pseudo-second-order kinetic (R² = 0.9989) and Langmuir models (R² = 0.9555) fitted the data well. Adsorption thermodynamics revealed that the adsorption was a spontaneous endothermic reaction. The possible adsorption mechanisms involved physical adsorption, electrostatic attraction and complexing. Moreover, because Pb²⁺ can be specifically and strongly adsorbed on IIMB, a simple method for detection of Pb²⁺ was established by coupling IIMB with flame atomic absorption spectrometry (IIMB-FAAS). The developed IIMB-FAAS assay can sensitively detect Pb²⁺ with a linear range from 5.0 to 500.0 μg/L. The detection limit (LOD) of 0.95 μg/L as well as a quantification limit (LOQ) of 3.20 μg/L were obtained. This work proved that the IIMB could selective and efficient adsorb Pb²⁺, which provided some insights into wastewater treatment, water quality inspection and environmental remediation.

Selective adsorption of cesium (I) from water by Prussian blue analogues anchored on 3D reduced graphene oxide aerogel

In this paper, Prussian blue analogues (PBAs) anchored on 3D reduced graphene aerogel (denoted as 3D rGO/PBAs) was prepared, characterized and applied for adsorption of Cs(I) from aqueous solution. The results showed that 3D rGO/PBAs had high specific surface and good hydrophilic property, which was beneficial to the exposure of adsorptive sites and the transfer of adsorbates. The composite exhibited excellent adsorption performance towards Cs(I), and the maximum adsorption capacity was up to 204.9 mg/g, higher than most of reported values. The pseudo second-order kinetic model (R² = 0.999) and the Langmuir isotherm model (R² = 0.997) could fit the adsorption process well, suggesting the nature of homogeneous monolayer chemisorption. High distribution coefficients (k_d) (2.8 × 10⁴ to 5.8 × 10⁴ mL/g), revealed that the composite had good selectivity. Ion-exchange, ion trapping and the complexation interaction might be involved in the process of cesium adsorption, in which ion-exchange may be dominant by characterization results.

Highly efficient capture of uranium from seawater by layered double hydroxide composite with benzamidoxime

Through swelling/restoration reaction, benzamidoxime (BAO) is introduced into MgAl-LDH interlayers to assemble a new composite of MgAl-BAO-LDH (abbr. BAO-LDH). Wet samples of the BAO-LDH obtained by washing with diverse solvents are present in colloidal state, which facilitates the fabrication of thin film adsorbents convenient for actual application. After drying, the assembled sample exhibits floral morphology composed of thin nanosheets, much different from hexagonal morphology of NO₃^- intercalated MgAl-LDH precursor (NO₃-LDH), demonstrating a phenomenon rarely found in swelling/restoration. The BAO-LDH depicts an extremely large maximum sorption capacity (q_m^U) of 327 mg·g^-1 and ultra-high selectivity for U. At low U concentrations (5-10 ppm), nearly complete capture (~100%) is achieved in a wide pH range of 3-11, while at high U concentrations (110 ppm), quite high U removals (≥93.0%) are obtained at pH = 6-8, meaning perfect suitability for trapping U from seawater. For natural seawater containing trace amounts of U (3.93 ppb) coexisting with high concentration of competitive ions, the BAO-LDH displays significantly high U removal (87%). Complexation between interlayer BAO (N and O as ligands) with UO₂²⁺ and synergistic interactions of LDH layer hydroxyls with UO₂²⁺ contribute to the highly effective uranium capture. All results demonstrate the BAO-LDH is a promising adsorbent applied in seawater uranium extraction and nuclear wastewater disposal.

Comparison of adsorption behaviors and mechanisms of methylene blue, Cd2+, and phenanthrene by modified biochars derived from pomelo peel

Although biochar (BC) has been widely used to adsorb pollutants in environment due to its natural and green characteristics, the structural defects of BC limit the ability to remove various environmental pollutants in aqueous solution. In this study, oxidized biochar (OBC) and sulfhydryl biochar (SBC) derived from pomelo peel (PP) were prepared through an oxidation and esterification reaction. BC and modified BC were used for the removal of methylene blue (MB), Cd2+, and phenanthrene (PHE) in aqueous solution. The adsorption behavior and efficiency toward different types of pollutants were studied by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Raman, X-ray photoelectron spectroscopy (XPS), kinetics, and isotherm model fitting. The results showed that the change of pH had great effect on MB and Cd2+ adsorption, but not on PHE. SBC not only possessed the newly formed sp2-hybridized domains with easy access to aromatic pollutants but also had multiple functional groups (-COOH, -OH, -SH, -NH2) that provided adsorption sites for positively charged pollutants. SBC was more flexible and efficient in purifying pollutants compared to BC and OBC, with the saturated adsorption capacities of MB (209.16 mg/g), Cd2+ (786.19 mg/g), and PHE (521.58 mg/g). Moreover, the adsorption kinetic and isotherms fitting showed that the adsorption mechanisms were closely related to the structure of biochar and the properties of pollutants, including π-π interaction, surface charge, electrostatic interaction, surface functional groups, and Van der Waals force. In addition, the analysis of structure-function relationship demonstrated the enhanced hydrophilicity and the easy exposure of the binding sites on OBC and SBC. Hence, it was significantly effective to regulate microstructure and interfacial properties to promote its adsorption behaviors of biochar.

Characterization and utilization of biochars derived from five invasive plant species Bidens pilosa L., Praxelis clematidea, Ipomoea cairica, Mikania micrantha and Lantana camara L. for Cd2+ and Cu2+ removal

Exotic invasive plants endanger the integrity of agricultural and natural systems throughout the world. Thus, the development of cost-effective and economic application of invasive plants is warranted. Here, we characterized fifteen biochars derived from five invasive plants at different temperatures (300, 500, and 700 °C) by determining their yield, ash content, pH, CEC, surface area, elementary composition, functional groups, and mineral composition. We conducted batch adsorption experiments to investigate the adsorption capacity and efficiency for Cd²⁺ and Cu²⁺ in wastewater. Our results suggest that all invasive plants are appropriate for biochar production, temperature and plant species had interacting effects on biochar properties, and the biochars pyrolyzed at 500 and 700 °C exhibited high metal adsorption capacity in neutral (pH = 7) solutions. The adsorption kinetics can be explained adequately by a pseudo-second-order model. BBC500 (Bidens pilosa L. derived biochar at 500 °C) and MBC500 (Mikania micrantha) exhibited higher metal equilibrium adsorption capacities (38.10 and 38.02 mg g^-1 for Cd²⁺, 20.01 and 20.10 mg g^-1 for Cu²⁺) and buffer abilities to pH than other biochars pyrolyzed at 500 °C. The Langmuir model was a better fit for IBC500 (Ipomoea cairica), MBC500, and LBC500 (Lantana camara L.) compared to the Freundlich model, whereas the opposite was true for BBC500 and PBC500 (Praxelis clematidea). These results suggest that the adsorption of metals by IBC500, MBC500, and LBC500 was mainly monolayer adsorption, while that by BBC500 and PBC500 was mainly chemical adsorption. Our results are important for the utilization and control of invasive plants as well as the decontamination of aqueous pollution.

Nanocellulose: a bioadsorbent for chemical contaminant remediation

Chemical contaminants such as heavy metals, dyes, and organic oils seriously affect the environment and threaten human health. About 2 million tons of waste is released every day into the water system. Heavy metals are the largest contributor which cover about 31% of the total composition of water contaminants. Every day, approximately 14 000 people die due to environmental exposure to selected chemicals. Removal of these contaminants down to safe levels is expensive, high energy and unsustainable by current approaches such as oxidation, biodegradation, photocatalysis, precipitation, reverse osmosis and adsorption. A combination of biosorption and nanotechnology offers a new way to remediate these chemical contaminants. Nanostructured materials are proven to have higher adsorption capacities than the same material in its larger-scale form. Nanocellulose is very promising as a high-performance bioadsorbent due to its interesting characteristics of high adsorption capacity, high mechanical strength, hydrophilic surface chemistry, renewability and biodegradability. It has been proven to have higher adsorption capacity and better binding affinity than other similar materials at the macroscale. The high specific surface area and abundance of hydroxyl groups within lead to the possible functionalization of this material for decontamination purposes. Several research papers have shown the effectiveness of nanocellulose in the remediation of chemical contaminants. This review aims to provide an overview of the most recent developments regarding nanocellulose as an adsorbent for chemical contamination remediation. Recent advancements regarding the modification of nanocellulose to enhance its adsorption efficiency towards heavy metals, dyes and organic oils were highlighted. Moreover, the desorption capability and environmental issue related to every developed nanocellulose-based adsorbent were also tackled.