Challenges in the application of microbial fuel cells to wastewater treatment and energy production: A mini review

Energy from waste biomass: an LCA study on a biofuel cell at early design stage

Diversifying energy sources and managing waste biomass are two pressing contemporary issues. The new technology proposed in this study aims to address both by converting waste biomass into energy and fertilizer through the use of a biofuel cell (BFC). The purpose of this study is to assess the environmental impacts associated with this innovative technology through a Life Cycle Assessment (LCA). To achieve the goal, the production and use of the cell were modelled, considering both laboratory-scale operations and industrial-scale approximations. The study explored alternative scenarios, such as sensitivity analyses involving different acids and bases, renewable energy sources, and heat recovery. Comparisons with conventional biomass waste treatments (anaerobic digestion and composting) demonstrated that the BFC technology remains competitive. To further improve the BFC's environmental footprint, efforts should focus on reducing energy requirements and enhancing nutrient recovery during scale-up. These insights are crucial for advancing sustainable waste treatment technologies and maximizing the potential of discarded biomass in an environmentally friendly manner.

Optimization of microbial fuel cell performance application to high sulfide industrial wastewater treatment by modulating microbial function

Microbial fuel cells (MFCs) are innovative eco-friendly technologies that advance a circular economy by enabling the conversion of both organic and inorganic substances in wastewater to electricity. While conceptually promising, there are lingering questions regarding the performance and stability of MFCs in real industrial settings. To address this research gap, we investigated the influence of specific operational settings, regarding the hydraulic retention time (HRT) and organic loading rate (OLR) on the performance of MFCs used for treating sulfide-rich wastewater from a canned pineapple factory. Experiments were performed at varying hydraulic retention times (2 days and 4 days) during both low and high seasonal production. Through optimization, we achieved a current density generation of 47±15 mA/m2, a COD removal efficiency of 91±9%, and a sulfide removal efficiency of 86±10%. Microbiome analysis revealed improved MFC performance when there was a substantial presence of electrogenic bacteria, sulfide-oxidizing bacteria, and methanotrophs, alongside a reduced abundance of sulfate-reducing bacteria and methanogens. In conclusion, we recommend the following operational guidelines for applying MFCs in industrial wastewater treatment: (i) Careful selection of the microbial inoculum, as this step significantly influences the composition of the MFC microbial community and its overall performance. (ii) Initiating MFC operation with an appropriate OLR is essential. This helps in establishing an effective and adaptable microbial community within the MFCs, which can be beneficial when facing variations in OLR due to seasonal production changes. (iii) Identifying and maintaining MFC-supporting microbes, including those identified in this study, should be a priority. Keeping these microbes as an integral part of the system's microbial composition throughout the operation enhances and stabilizes MFC performance.

Conductive and capacitive network for enriching the exoelectrogens and enhancing the extracellular electron transfer in microbial fuel cells

Although lots of nanomaterials modified anodes have been reported to improve the bacterial attachment and extracellular electron transfer (EET) in microbial fuel cells (MFCs), the lack of a three dimensional (3D) conductive and capacitive network severely limited MFCs performance. In this work, 3D conductive networks derived from mucor mycelia were grown on carbon cloth (CC), and capacitive FeMn phosphides/oxides were further anchored on these 3D networks by electrochemical deposition (denoted as FeMn/CMM@CC) to simultaneously address the above challenges. As a result, the multivalent metal active sites were evenly distributed on 3D conductive network, which favored the enrichment of exoelectrogens, mass transport and EET. Consequently, the as-prepared FeMn/CMM@CC anode displayed accumulated charge of 131.4C/m2, higher than bare CC. Meanwhile, FeMn/CMM@CC anode substantially promoted flavin excretion and the amounts of nano conduits. The abundance of Geobacter was 63 % on bare CC, and greatly increased to 83 % on FeMn/CMM@CC. MFCs equipped by FeMn/CMM@CC anode presented the power density of 3.06 W/m2 and coulombic efficiency (29.9 %), evidently higher than bare CC (1.29 W/m2, 7.3 %), and the daily chemical oxygen demand (COD) removal amount also increased to 92.6 mg/L/d. This work developed a facile method to optimize the abiotic-biotic interface by introducing 3D conductive and capacitive network, which was proved to be a promising strategy to modify macro-porous electrodes.

Sorting Out the Latest Advances in Separators and Pilot-Scale Microbial Electrochemical Systems for Wastewater Treatment: Concomitant Development, Practical Application, and Future Perspective

To date, dozens of pilot-scale microbial fuel cell (MFC) devices have been successfully developed worldwide for treating various types of wastewater. The availability and configurations of separators are determining factors for the economic feasibility, efficiency, sustainability, and operability of these devices. Thus, the concomitant advances between the separators and pilot-scale MFC configurations deserve further clarification. The analysis of separator configurations has shown that their evolution proceeds as follows: from ion-selective to ion-non-selective, from nonpermeable to permeable, and from abiotic to biotic. Meanwhile, their cost is decreasing and their availability is increasing. Notably, the novel MFCs configured with biotic separators are superior to those configured with abiotic separators in terms of wastewater treatment efficiency and capital cost. Herein, a highly comprehensive review of pilot-scale MFCs (>100 L) has been conducted, and we conclude that the intensive stack of the liquid cathode configuration is more advantageous when wastewater treatment is the highest priority. The use of permeable biotic separators ensures hydrodynamic continuity within the MFCs and simplifies reactor configuration and operation. In addition, a systemic comparison is conducted between pilot-scale MFC devices and conventional decentralized wastewater treatment processes. MFCs showed comparable cost, higher efficiency, long-term stability, and significant superiority in carbon emission reduction. The development of separators has greatly contributed to the availability and usability of MFCs, which will play an important role in various wastewater treatment scenarios in the future.

Scale-up single chamber of microbial fuel cell using agitator and sponge biocarriers

Despite the high efficiency of microbial fuel cells (MFCs), MFCs cannot be a suitable alternative for treatment plants because of insufficient power generation and tiny reactors. Additionally, the increased reactor size and MFC stack result in a reduction in production power and reverse voltage. In this study, a larger MFC with a volume of 1.5 L has been designed called LMFC. A conventional MFC, called SMFC, with a volume of 0.157 L, was constructed and compared with LMFC. Moreover, the designed LMFC can be integrated with other treatment systems and generate significant electricity. In order to evaluate MFC's ability to integrate with other treatment systems, the LMFC reactor was converted into MFC-MBBR by adding sponge biocarriers. A 9.5 percent increase in reactor volume resulted in a 60 percent increase in power density from 290 (SMFC) to 530 (LMFC). An agitator effect was also investigated for better mixing and circulating substrate, which positively affected the power density by about 18%. Compared with LMFCs, the reactor with biocarriers generated a 28% higher power density. The COD removal efficiency of SMFC, LMFC, and MFC-MBBR reactors after 24 h was 85, 66, and 83%, respectively. After 80 h of operation, the Coulombic efficiency of the SMFC, LMFC, and MFC-MBBR reactors was 20.9, 45.43, and 47.28%, respectively. The doubling of coulombic efficiency from SMFC to LMFC reactor shows the design's success. The reduction of COD removal efficiency in LMFC is the reason for integrating this reactor with other systems, which was compensated by adding biocarriers.

Simultaneous removal of methylene blue and Cr(VI) in a dual-chamber photocatalytic microbial fuel cell with WO3/MoS2/FTO photocathode

Carbon felt was used as the anode and WO3/MoS2/FTO (fluorine-doped tin oxide) was used as the photocathode in a photocatalytic microbial fuel cell (PMFC). The photoelectric performance of the WO3/MoS2/FTO photocathode and the removal efficiency of methylene blue (MB) and Cr(VI) mixed pollutants were systematically investigated in the cathode chamber. The results showed that after 12 h of light irradiation in the PMFC with WO3/MoS2/FTO as the photocathode, the removal rates of MB and Cr(VI) were 84.56 and 68.11 %, respectively, which were much higher than those using WO3/FTO as a photocathode (55.57 % and 45.26 %, respectively). The corresponding maximum output power was 33.14 mW/m2, which was 1.85 times that of the WO3/FTO photocathode PMFC. These results can be attributed to the fact that WO3 is an n-type semiconductor and MoS2 is a p-type semiconductor. Analysis of trapping experiments showed that the composite of WO3 and MoS2 formed a Z-scheme heterojunction, which improved the separation efficiency of the photoelectric carriers and enhanced the pollutant removal efficiency of the photocathode. PMFCs are a new and environment-friendly technology for removing pollutants thereby providing an experimental basis for future engineering applications.

A comprehensive review of microbial fuel cells considering materials, methods, structures, and microorganisms

Microbial fuel cells (MFCs) are promising for generating renewable energy from organic matter and efficient wastewater treatment. Ensuring their practical viability requires meticulous optimization and precise design. Among the critical components of MFCs, the membrane separator plays a pivotal role in segregating the anode and cathode chambers. Recent investigations have shed light on the potential benefits of membrane-less MFCs in enhancing power generation. However, it is crucial to recognize that such configurations can adversely impact the electrocatalytic activity of anode microorganisms due to increased substrate and oxygen penetration, leading to decreased coulombic efficiency. Therefore, when selecting a membrane for MFCs, it is essential to consider key factors such as internal resistance, substrate loss, biofouling, and oxygen diffusion. Addressing these considerations carefully allows researchers to advance the performance and efficiency of MFCs, facilitating their practical application in sustainable energy production and wastewater treatment. Accelerated substrate penetration could also lead to cathode clogging and bacterial inactivation, reducing the MFC's efficiency. Overall, the design and optimization of MFCs, including the selection and use of membranes, are vital for their practical application in renewable energy generation and wastewater treatment. Further research is necessary to overcome the challenges of MFCs without a membrane and to develop improved membrane materials for MFCs. This review article aims to compile comprehensive information about all constituents of the microbial fuel cell, providing practical insights for researchers examining various variables in microbial fuel cell research.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

A concise review on wastewater treatment through microbial fuel cell: sustainable and holistic approach

Research for alternative sources for producing renewable energy is rising exponentially, and consequently, microbial fuel cells (MFCs) can be seen as a promising approach for sustainable energy production and wastewater purification. In recent years, MFC is widely utilized for wastewater treatment in which the removal efficiency of heavy metal ranges from 75-95%. They are considered as green and sustainable technology that contributes to environmental safety by reducing the demand for fossil fuels, diminishes carbon emissions, and reverses the trend of global warming. Moreover, significant reduction potential can be seen for other parameters such as total carbon oxygen demand (TCOD), soluble carbon oxygen demand (SCOD), total suspended solids (TSS), and total nitrogen (TN). Furthermore, certain problems like economic aspects, model and design of MFCs, type of electrode material, electrode cost, and concept of electro-microbiology limit the commercialization of MFC technology. As a result, MFC has never been accepted as an appreciable competitor in the area of treating wastewater or renewable energy. Therefore, more efforts are still required to develop a useful model for generating safe, clean, and CO2 emission-free renewable energy along with wastewater treatment. The purpose of this review is to provide a deep understanding of the working mechanism and design of MFC technology responsible for the removal of different pollutants from wastewater and generate power density. Existing studies related to the implementation of MFC technology in the wastewater treatment process along with the factors affecting its functioning and power outcomes have also been highlighted.

N-Doped Carbon Nanowire-Modified Macroporous Carbon Foam Microbial Fuel Cell Anode: Enrichment of Exoelectrogens and Enhancement of Extracellular Electron Transfer

Microbial fuel cell (MFC) performance is affected by the metabolic activity of bacteria and the extracellular electron transfer (EET) process. The deficiency of nanostructures on macroporous anode obstructs the enrichment of exoelectrogens and the EET. Herein, a N-doped carbon nanowire-modified macroporous carbon foam was prepared and served as an anode in MFCs. The anode has a hierarchical porous structure, which can solve the problem of biofilm blockage, ensure mass transport, favor exoelectrogen enrichment, and enhance the metabolic activity of bacteria. The microscopic morphology, spectroscopy, and electrochemical characterization of the anode confirm that carbon nanowires can penetrate biofilm, decrease charge resistance, and enhance long-distance electron transfer efficiency. In addition, pyrrolic N can effectively reduce the binding energy and electron transfer distance of bacterial outer membrane hemin. With this hierarchical anode, a maximum power density of 5.32 W/m3 was obtained, about 2.5-fold that of bare carbon cloth. The one-dimensional nanomaterial-modified macroporous anodes in this study are a promising strategy to improve the exoelectrogen enrichment and EET for MFCs.

Power generation from wastewater using microbial fuel cells: A review

As the world grapples with an imminent energy crisis brought on by the depletion of nonrenewable resources, such as petroleum, the necessity for alternative and eco-friendly power sources becomes increasingly apparent. In this regard harnessing knowledge gained from natural microorganisms to produce electricity using economical substrates is a promising solution through microbial fuel cells (MFCs). Microbial fuel cells leverage microbes' catabolic abilities to break down organic matter and release electrons that are subsequently transported across an external circuit for electricity generation. This article delves into the fundamental components involved in MFC construction and explores crucial factors that impact their performance including substrate oxidation, electron transfer, and internal resistance. Additionally, it offers a comprehensive analysis of existing microbial fuel cell designs while highlighting their respective strengths and weaknesses. Finally, the article showcases cost-effective MFC models based on thorough studies conducted worldwide while illuminating potential practical applications of this renewable energy technology.

The race between classical microbial fuel cells, sediment-microbial fuel cells, plant-microbial fuel cells, and constructed wetlands-microbial fuel cells: Applications and technology readiness level

Microbial fuel cell (MFC) is an interesting technology capable of converting the chemical energy stored in organics to electricity. It has raised high hopes among researchers and end users as the world continues to face climate change, water, energy, and land crisis. This review aims to discuss the journey of continuously progressing MFC technology from the lab to the field so far. It evaluates the historical development of MFC, and the emergence of different variants of MFC or MFC-associated other technologies such as sediment-microbial fuel cell (S-MFC), plant-microbial fuel cell (P-MFC), and integrated constructed wetlands-microbial fuel cell (CW-MFC). This review has assessed primary applications and challenges to overcome existing limitations for commercialization of these technologies. In addition, it further illustrates the design and potential applications of S-MFC, P-MFC, and CW-MFC. Lastly, the maturity and readiness of MFC, S-MFC, P-MFC, and CW-MFC for real-world implementation were assessed by multicriteria-based assessment. Wastewater treatment efficiency, bioelectricity generation efficiency, energy demand, cost investment, and scale-up potential were mainly considered as key criteria. Other sustainability criteria, such as life cycle and environmental impact assessments were also evaluated.

Microbe-Anode Interactions: Comparing the impact of genetic and material engineering approaches to improve the performance of microbial electrochemical systems (MES)

Microbial electrochemical systems (MESs) are a highly versatile platform technology with a particular focus on power or energy production. Often, they are used in combination with substrate conversion (e.g., wastewater treatment) and production of value-added compounds via electrode-assisted fermentation. This rapidly evolving field has seen great improvements both technically and biologically, but this interdisciplinarity sometimes hampers overseeing strategies to increase process efficiency. In this review, we first briefly summarize the terminology of the technology and outline the biological background that is essential for understanding and thus improving MES technology. Thereafter, recent research on improvements at the biofilm-electrode interface will be summarized and discussed, distinguishing between biotic and abiotic approaches. The two approaches are then compared, and resulting future directions are discussed. This mini-review therefore provides basic knowledge of MES technology and the underlying microbiology in general and reviews recent improvements at the bacteria-electrode interface.

Recent Advances in Bioelectrochemical Systems for Nitrogen and Phosphorus Recovery Using Membranes

Bioelectrochemical systems (BESs) have emerged as a technology that is able to recover resources from different kinds of substrates, especially wastewater. Nutrient recovery, mostly based on membrane reactor configuration, is a clear niche for BES application. The recovery of nitrogen or phosphorus allows for treatment of wastewater while simultaneously collecting a concentrated stream with nutrients that can be reintroduced into the system, becoming a circular economy solution. The aim of this study is to review recent advances in membrane-based BESs for nitrogen and phosphorus recovery and compare the recovery efficiencies and energy requirements of each system. Finally, there is a discussion of the main issues that arise from using membrane-based BESs. The results presented in this review show that it would be beneficial to intensify research on BESs to improve recovery efficiencies at the lowest construction cost in order to take the final step towards scaling up and commercialising this technology.

Engineering Shewanella oneidensis to efficiently harvest electricity power by co-utilizing glucose and lactate in thin stillage of liquor industry

Thin stillage, rich in glucose and lactate, can seriously pollute water resources when directly discharged into the natural environment. Microbial fuel cells (MFC), as a green and sustainable technology, could utilize exoelectrogens to break down organics in wastewater and harvest electricity. Nevertheless, Shewanella oneidensis MR-1, cannot utilize thin stillage for efficient power generation. Here, to enable S. oneidensis to co-utilize glucose and lactate from thin stillage, an engineered S. oneidensis G₇∆RSL₁ was first created by constructing glucose metabolism pathway, promoting glucose and lactate co-utilization, and enhancing biofilm formation. Then, to enhance biofilm conductivity, we constructed a 3D self-assembled G₇∆RSL₁-rGO/CNT biohybrid with maximum power density of 560.4 mW m^-2 and 373.7 mW m^-2 in artificial and actual thin stillage, respectively, the highest among the reported genetically engineered S. oneidensis with thin stillage as carbon source. This study provides a new strategy to facilitate practical applications of MFC in wastewater remediation and efficient power recovery.

Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation

This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr⁶⁺ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr⁶⁺. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr⁶⁺ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr⁶⁺ to less toxic Cr³⁺. The organic substrates utilized at the anode of MFC act as electrons (e^-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.

Solid-State Synthesis of Cobalt/NCS Electrocatalyst for Oxygen Reduction Reaction in Dual Chamber Microbial Fuel Cells

Due to the high cost of presently utilized Pt/C catalysts, a quick and sustainable synthesis of electrocatalysts made of cost-effective and earth-abundant metals is urgently needed. In this work, we demonstrated a mechanochemically synthesized cobalt nanoparticles supported on N and S doped carbons derived from a solid-state-reaction between zinc acetate and 2-amino thiazole as metal, organic ligand in presence of cobalt (Co) metal ions Zn_xCo_x(C₃H₄N₂S). Pyrolysis of the Zn_xCo_x(C₃H₄N₂S) produced, Co/NSC catalyst in which Co nanoparticles are evenly distributed on the nitrogen and sulfur doped carbon support. The Co/NSC catalyst have been characterized with various physical and electrochemical characterization techniques. The Co content in the Zn_xCo_x(C₃H₄N₂S) is carefully adjusted by varying the Co content and the optimized Co/NSC-3 catalyst is subjected to the oxygen reduction reaction in 0.1 M HClO₄ electrolyte. The optimized Co/NSC-3 catalyst reveals acceptable ORR activity with the half-wave potential of ~0.63 V vs. RHE in acidic electrolytes. In addition, the Co/NSC-3 catalyst showed excellent stability with no loss in the ORR activity after 10,000 potential cycles. When applied as cathode catalysts in dual chamber microbial fuel cells, the Co/NCS catalyst delivered satisfactory volumetric power density in comparison with Pt/C.

Valorization of wastewater: A paradigm shift towards circular bioeconomy and sustainability

Limitation in the availability of natural resources like water is the main drive for focussing on resource recovery from wastewater. Rapid urbanization with increased consumption of natural resources has severely affected its management and security. The application of biotechnological processes offers a feasible approach to concentrating and transforming wastewater for resource recovery and a step towards a circular economy. Wastewater generally contains high organic materials, nutrients, metals and chemicals, which have economic value. Hence, its management can be a valuable resource through the implementation of a paradigm transformation for value-added product recovery. This review focuses on the circular economy of "close loop" process by wastewater reuse and energy recovery identifying the emerging technologies for recovering resources across the wastewater treatment phase. Conventional wastewater treatment technologies have been discussed along with the advanced treatment technologies such as algal treatment, anammox technology, microbial fuel cells (MFC). Apart from recovering energy in the form of biogas and biohydrogen, second and third-generation biofuels as well as biohythane and electricity generation have been deliberated. Other options for resource recovery are single-cell protein (SCP), biopolymers as well as recovery of metals and nutrients. The paper also highlights the applications of treated wastewater in agriculture, aquaponics, fisheries and algal cultivation. The concept of Partitions-release-recover (PRR) has been discussed for a better understanding of the filtration treatment coupled with anaerobic digestion. The review provides a critical evaluation on the importance of adopting a circular economy and their role in achieving sustainable development goals (SDGs). Thus, it is imperative that such initiatives towards resource recovery from wastewater through integration of concepts can aid in providing wastewater treatment system with resource efficiency.

Degradation of Hydroquinone Coupled with Energy Generation through Microbial Fuel Cells Energized by Organic Waste

Microbial fuel cell (MFC) technology has captured the scientific community’s attention in recent years owing to its ability to directly transform organic waste into electricity through electrochemical processes. Currently, MFC systems faces a number of barriers, with one of the most significant being the lack of organic substrate to provide enough energy for bacterial growth and activity. In the current work, rotten rice was utilized as an organic substrate to boost bacterial activity to produce more energy and break down the organic pollutant hydroquinone in an effort to improve the performance of MFCs. There are only a few studies that considered the waste as an organic substrate and simultaneously degraded the organic pollutant vis-à-vis MFCs. The oxidation of glucose derived from rotten rice generated electrons that were transported to the anode surface and subsequently flowed through an external circuit to the cathode, where they were used to degrade the organic pollutant hydroquinone. The results were consistent with the MFC operation, where the 168-mV voltage was generated over the course of 29 days with a 1000 Ω external resistance. The maximum power and current densities were 1.068 mW/m2 and 123.684 mA/m2, respectively. The hydroquinone degradation was of 68%. For the degradation of organic pollutants and the production of energy, conductive pili-type bacteria such as Lacticaseibacillus, Pediococcus acidilactici and Secundilactobacillus silagincola species were identified during biological characterization. Future recommendations and concluding remarks are also included.

Hydrolyzed polyacrylamide biotransformation during the formation of anode biofilm in microbial fuel cell biosystem: Bioelectricity, metabolites and functional microorganisms

The anode biofilm serves as the core dominating the performance of microbial fuel cell (MFC) biosystem. This research provides new insights into hydrolyzed polyacrylamide (HPAM) biotransformation during the formation of anode biofilm. The current density, coulombic efficiency, voltage, power density, volatile fatty acid (VFA) production and total nitrogen (TN) removal enhanced with the thickening of biofilm (1-6 cm), and the maximums achieved 146 mA·m^-2, 47.3%, 8.76 V, 1.28 W·m^-2, 184 mg·L^-1 and 84.6%, respectively. HPAM concentration descended from 508 mg·L^-1 to 83.3 mg·L^-1 after 60 days. HPAM was metabolized into VFAs, N₂, NO₂^--N and NO₃^--N, thereby releasing electrons. Laccase and tyrosine/tryptophan protein induced HPAM metabolism and bioelectricity production. The microbial functions involving HPAM biotransformation and bioelectricity generation were clarified. The alternative resource recovery, techno-economic comparison and development direction of MFC biosystem were discussed to achieve the synchronization of HPAM-containing wastewater treatment and bioelectricity generation based on MFC biosystem.

Synergic degradation Chloramphenicol in photo-electrocatalytic microbial fuel cell over Ni/MXene photocathode

The abuse of Chloramphenicol (CAP) has become the increasingly serious environmental problem for its harmfulness and toxicity. A novel strategy was achieved by photocatalysis coupled with microbial fuel cell (Photo-MFC) over Ni/MXene photocathode for enhancing the degradation efficiency of (CAP). It was demonstrated that the best degradation efficiency of CAP can reach 82.62% (original concentration of 30 mg/L) after 36 h under the optimal conditions (pH = 2). Based on density functional theory (DFT) calculations and high-performance liquid chromatography-mass (HPLC-MS) spectrometry, it was speculated that the degradation mechanism of CAP in Photo-MFC over Ni/MXene photoelectrode was achieved by destroying the two asymmetric centers and nitro, including the hydrodechlorination, nitro reduction reaction, hydroxylation reaction, cleavage of CN bond and ring-opening reaction of benzene ring. Finally, the ecotoxicity evaluation of the degradation products showed that the CAP degradation in the Ni/MXene modified photo-MFC system showed a remarkable tendency to the low-toxicity level.

Nutrient removal and recovery from wastewater by microbial fuel cell-based systems - A review

Microbial fuel cell (MFC) is a green innovative technology that can be employed for nutrient removal/recovery as well as for energy production from wastewater. This paper summarizes the recent advances in the use of MFCs for nutrient removal/recovery. Different configurations of MFCs used for nutrient removal are first described. Different types of nutrient removal/recovery mechanisms such as precipitation, biological uptake by microalgae, nitrification, denitrification and ammonia stripping occurring in MFCs are discussed. Recovery of nutrients as struvite or cattiite by precipitation, as microalgal biomass and as ammonium salts are common. This review shows that while higher nutrient removal/recovery is possible with MFCs and their modifications compared to other techniques as indicated by many laboratory studies, field-scale studies and optimization of operational parameters are needed to develop efficient MFCs for nutrient removal and recovery and electricity generation from different types of wastewaters.

Contribution of configurations, electrode and membrane materials, electron transfer mechanisms, and cost of components on the current and future development of microbial fuel cells

Microbial fuel cells (MFCs) are a technology that can be applied to both the wastewater treatment and bioenergy generation. This work discusses the contribution of improvements regarding the configurations, electrode materials, membrane materials, electron transfer mechanisms, and materials cost on the current and future development of MFCs. Analysis of the most recent scientific publications on the field denotes that dual-chamber MFCs configuration offers the greatest potential due to the excellent ability to be adapted to different operating environments. Carbon-based materials show the best performance, biocompatibility of carbon-brush anode favors the formation of the biofilm in a mixed consortium and in wastewater as a substrate resembles the conditions of real scenarios. Carbon-cloth cathode modified with nanotechnology favors the conductive properties of the electrode. Ceramic clay membranes emerge as an interesting low-cost membrane with a proton conductivity of 0.0817 S cm^-1, close to that obtained with the Nafion membrane. The use of nanotechnology in the electrodes also enhances electron transfer in MFCs. It increases the active sites at the anode and improves the interface with microorganisms. At the cathode, it favors its catalytic properties and the oxygen reduction reaction. These features together favor MFCs performance through energy production and substrate degradation with values above 2.0 W m^-2 and 90% respectively. All the recent advances in MFCs are gradually contributing to enable technological alternatives that, in addition to wastewater treatment, generate energy in a sustainable manner. It is important to continue the research efforts worldwide to make MFCs an available and affordable technology for industry and society.

Microbial fuel cells for mineralization and decolorization of azo dyes: Recent advances in design and materials

Microbial fuel cells (MFCs) exhibit tremendous potential in the sustainable management of dye wastewater via degrading azo dyes while generating electricity. The past decade has witnessed advances in MFC configurations and materials; however, comprehensive analyses of design and material and its association with dye degradation and electricity generation are required for their industrial application. MFC models with high efficiency of dye decolorization (96-100%) and a wide variation in power generation (29.4-940 mW/m²) have been reported. However, only 28 out of 104 studies analyzed dye mineralization - a prerequisite to obviate dye toxicity. Consequently, the current review aims to provide an in-depth analysis of MFCs potential in dye degradation and mineralization and evaluates materials and designs as crucial factors. Also, structural and operation parameters critical to large-scale applicability and complete mineralization of azo dye were evaluated. Choice of materials, i.e., bacteria, anode, cathode, cathode catalyst, membrane, and substrate and their effects on power density and dye decolorization efficiency presented in review will help in economic feasibility and MFCs scalability to develop a self-sustainable solution for treating azo dye wastewater.

Microalgae-bacterial granular consortium: Striding towards sustainable production of biohydrogen coupled with wastewater treatment

Anthropogenic activities have drastically affected the environment, leading to increased waste accumulation in atmospheric bodies, including water. Wastewater treatment is an energy-consuming process and typically requires thousands of kilowatt hours of energy. This enormous energy demand can be fulfilled by utilizing the microbial electrolysis route to breakdown organic pollutants in wastewater which produces clean water and biohydrogen as a by-product of the reaction. Microalgae are the promising microorganism for the biohydrogen production, and it has been investigated that the interaction between microalgae and bacteria can be used to boost the yield of biohydrogen. Consortium of algae and bacteria resulting around 50-60% more biohydrogen production compared to the biohydrogen production of algae and bacteria separately. This review summarises the recent development in different microalgae-bacteria granular consortium systems successfully employed for biohydrogen generation. We also discuss the limitations in biohydrogen production and factors affecting its production from wastewater.

Pilot scale microbial fuel cells using air cathodes for producing electricity while treating wastewater

Microbial fuel cells (MFCs) can generate electrical energy from the oxidation of the organic matter, but they must be demonstrated at large scales, treat real wastewaters, and show the required performance needed at a site to provide a path forward for this technology. Previous pilot-scale studies of MFC technology have relied on systems with aerated catholytes, which limited energy recovery due to the energy consumed by pumping air into the catholyte. In the present study, we developed, deployed, and tested an 850 L (1400 L total liquid volume) air-cathode MFC treating domestic-type wastewater at a centralized wastewater treatment facility. The wastewater was processed over a hydraulic retention time (HRT) of 12 h through a sequence of 17 brush anode modules (11 m² total projected anode area) and 16 cathode modules, each constructed using two air-cathodes (0.6 m² each, total cathode area of 20 m²) with the air side facing each other to allow passive air flow. The MFC effluent was further treated in a biofilter (BF) to decrease the organic matter content. The field test was conducted for over six months to fully characterize the electrochemical and wastewater treatment performance. Wastewater quality as well as electrical energy production were routinely monitored. The power produced over six months by the MFC averaged 0.46 ± 0.35 W (0.043 W m^-2 normalized to the cross-sectional area of an anode) at a current of 1.54 ± 0.90 A with a coulombic efficiency of 9%. Approximately 49 ± 15 % of the chemical oxygen demand (COD) was removed in the MFC alone as well as a large amount of the biochemical oxygen demand (BOD₅) (70%) and total suspended solid (TSS) (48%). In the combined MFC/BF process, up to 91 ± 6 % of the COD and 91 % of the BOD₅ were removed as well as certain bacteria (E. coli, 98.9%; fecal coliforms, 99.1%). The average effluent concentration of nitrate was 1.6 ± 2.4 mg L^-1, nitrite was 0.17 ± 0.24 mg L^-1 and ammonia was 0.4 ± 1.0 mg L^-1. The pilot scale reactor presented here is the largest air-cathode MFC ever tested, generating electrical power while treating wastewater.

Engineering Shewanella carassii, a newly isolated exoelectrogen from activated sludge, to enhance methyl orange degradation and bioelectricity harvest

Electroactive microorganisms (EAMs) play important roles in biogeochemical redox processes and have been of great interest in the fields of energy recovery, waste treatment, and environmental remediation. However, the currently identified EAMs are difficult to be widely used in complex and diverse environments, due to the existence of poor electron transfer capability, weak environmental adaptability, and difficulty with engineering modifications, etc. Therefore, rapid and efficient screening of high performance EAMs from environments is an effective strategy to facilitate applications of microbial fuel cells (MFCs). In this study, to achieve efficient degradation of methyl orange (MO) by MFC and electricity harvest, a more efficient exoelectrogen Shewanella carassii-D₅ that belongs to Shewanella spp. was first isolated from activated sludge by WO₃ nanocluster probe technique. Physiological properties experiments confirmed that S. carassii-D₅ is a Gram-negative strain with rounded colonies and smooth, slightly reddish surface, which could survive in media containing lactate at 30 °C. Moreover, we found that S. carassii-D₅ exhibited remarkable MO degradation ability, which could degrade 66% of MO within 72 h, 1.7 times higher than that of Shewanella oneidensis MR-1. Electrochemical measurements showed that MFCs inoculated with S. carassii-D₅ could generate a maximum power density of 704.6 mW/m², which was 5.6 times higher than that of S. oneidensis MR-1. Further investigation of the extracellular electron transfer (EET) mechanism found that S. carassii-D₅ strain had high level of c-type cytochromes and strong biofilm formation ability compared with S. oneidensis MR-1, thus facilitating direct EET. Therefore, to enhance indirect electron transfer and MO degradation capacity, a synthetic gene cluster ribADEHC encoding riboflavin synthesis pathway from Bacillus subtilis was heterologously expressed in S. carassii-D₅, increasing riboflavin yield from 1.9 to 9.0 mg/g DCW with 1286.3 mW/m² power density output in lactate fed-MFCs. Furthermore, results showed that the high EET rate endowed a faster degradation efficient of MO from 66% to 86% with a maximum power density of 192.3 mW/m², which was 1.3 and 1.6 times higher than that of S. carassii-D₅, respectively. Our research suggests that screening and engineering high-efficient EAMs from sludge is a feasible strategy in treating organic pollutants.

Mitigating long-term emissions of landfill aftercare: Preliminary results from experiments combining microbial electrochemical technologies and in situ aeration

Landfills still represent the main option for waste disposal in many parts of the world. Anyway, they often pose a significant pollution risk and contribute to potential environmental and human health impacts via gaseous and liquid (leachate) emission pathways if not properly managed. Some innovative technologies can help to reduce these emissions, such as in situ aeration and the application of microbial electrochemical technologies (METs). METs are an emerging field that open the possibility to control microbial reactions, enhancing electron flows from electron donors towards electron acceptors. To this end, several materials with different electrochemically-active properties are used, such as electrical conductivity, capacitance, surface electroactivity and charge. The present project named LA-LA-LAND (Landfill electron-Lapping for a LANDscape requalification) was aimed to apply METs to treat leachate-saturated zones in old landfills. A MET prototype was constructed using a granular anode (graphite) and a cylindrical air-cathode (electroactive biochar). The METs were integrated to three identical laboratory-scale landfill bioreactors coupled with the in situ aeration technique, while three control reactors run without MET. The maximum values of current and power density obtained were 0.015 A·m^-2 and 0.00035 W·m^-2. The influence of the MET system on the organic matter removal was evident in two reactors, where this technology was applied, with respect to the control ones: total organic carbon decreased on average 13%, while it reduced less than 5% in the control reactors. This preliminary experiment pointed out some critical aspects of MET configuration, such as the weakness of the cathode architecture, which was prone to be flooded by leachate, blocking the aeration flux.

Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy

Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.

Effect of β-cyclodextrin/polydopamine composite modified anode on the performance of microbial fuel cell

The relatively weak microbial adhesion is a bottleneck in improving the power generation performance of microbial fuel cell (MFC). Anode modification is a simple and effective method to solve this problem. A new type of β-cyclodextrin/polydopamine modified carbon felt anode was prepared, and the effects of β-cyclodextrin/polydopamine modified anode on the main performance indexes such as power density and chemical oxygen demand (COD) removal rate of MFC were evaluated. The maximum power density and the output electric energy during the test period of MFC using the modified anode were 102 mW/m² and 84.96 J, which were 364% and 295.3% higher than those of MFC with conventional carbon felt anode, respectively; and the COD removal rate was 124.4% higher than that of MFC with unmodified anode. Modifying the anode with β-cyclodextrin-polyacyclic composite materials is an effective method to improve the overall performance of MFC.

A critical review on microbe-electrode interactions towards heavy metal ion detection using microbial fuel cell technology

Implicit interaction of electroactive microbes with solid electrodes is an interesting phenomenon in nature, which supported development of bioelectrochemical systems (BESs), especially the microbial fuel cell (MFCs) for valorization of low-value waste streams into bioelectricity. Intriguingly, the metabolism of interacted microbes with electrode is affected by the microenvironment at electrodes, which influences the current response. For instance, when heavy metal ions (HMIs) are imposed in the medium, the current production decreases due to their intrinsic toxic effect. This event provides an immense opportunity to utilize MFC as a sensor to selectively detect HMIs in the environment, which has been explored vastly in recent decade. In this review, we have concisely discussed the microbial interaction with electrodes and mechanism of detection of HMIs using an MFC. Recent advancement in sensing elements and their application is elaborated with a future perspective section for follow-up research and development in this field.

A review on bio-electro-Fenton systems as environmentally friendly methods for degradation of environmental organic pollutants in wastewater

Bio-electro-Fenton (BEF) systems have been potentially studied as a promising technology to achieve environmental organic pollutants degradation and bioelectricity generation. The BEF systems are interesting and constantly expanding fields of science and technology. These emerging technologies, coupled with anodic microbial metabolisms and electrochemical Fenton's reactions, are considered suitable alternatives. Recently, great attention has been paid to BEFs due to special features such as hydrogen peroxide generation, energy saving, high efficiency and energy production, that these features make BEFs outstanding compared with the existing technologies. Despite the advantages of this technology, there are still problems to consider including low production of current density, chemical requirement for pH adjustment, iron sludge formation due to the addition of iron catalysts and costly materials used. This review has described the general features of BEF system, and introduced some operational parameters affecting the performance of BEF system. In addition, the results of published researches about the degradation of persistent organic pollutants and real wastewaters treatment in BEF system are presented. Some challenges and possible future prospects such as suitable methods for improving current generation, selection of electrode materials, and methods for reducing iron residues and application over a wide pH range are also given. Thus, the present review mainly revealed that BEF system is an environmental friendly technology for integrated wastewater treatment and clean energy production.

Recent progress in microbial fuel cells for industrial effluent treatment and energy generation: Fundamentals to scale-up application and challenges

Microbial fuel cells (MFCs) technology have the potential to decarbonize electricity generation and offer an eco-friendly route for treating a wide range of industrial effluents from power generation, petrochemical, tannery, brewery, dairy, textile, pulp/paper industries, and agro-industries. Despite successful laboratory-scale studies, several obstacles limit the MFC technology for real-world applications. This review article aimed to discuss the most recent state-of-the-art information on MFC architecture, design, components, electrode materials, and anodic exoelectrogens to enhance MFC performance and reduce cost. In addition, the article comprehensively reviewed the industrial effluent characteristics, integrating conventional technologies with MFCs for advanced resource recycling with a particular focus on the simultaneous bioelectricity generation and treatment of various industrial effluents. Finally, the article discussed the challenges, opportunities, and future perspectives for the large-scale applications of MFCs for sustainable industrial effluent management and energy recovery.

Mapping Research on Microbial Fuel Cells in Wastewater Treatment: A Co-Citation Analysis

Microbial fuel cells (MFCs) are promising technologies, aiming at treating different types of industrial and domestic wastewater. In recent years, more and more publications focusing on wastewater treatment have been published. Based on the retrieval of publications from Web of Science Core Collection database, the new emerging trends of microbial fuel cells in wastewater treatment was evaluated with a scientometric analysis method from 1995 to 2020. All publications downloaded from (WOS) were screened by inclusion criteria, and 2233 publications were obtained for further analysis. Document co-citation and burst detection of MFCs in wastewater treatment were analyzed and visualized by software of CiteSpace. Our study indicated that “Environmental Science” is the most popular discipline, while the journal of Bioresource Technology published the greatest quantity of articles in the field of MFCs applied wastewater treatment. China and the Chinese Academy of Science are the most productive country and institution, respectively. “Azo dye” has become the new research topic, which indicates the application area and the development of MFCs. The performance of MFCs for wastewater treatment has been widely discussed. The findings of this study may ameliorate the researcher in seizing the frontier of MFCs in wastewater treatment.

A review on future wastewater treatment technologies: micro-nanobubbles, hybrid electro-Fenton processes, photocatalytic fuel cells, and microbial fuel cells

The future prospect in wastewater treatment technologies mostly emphasizes processing efficiency and the economic benefits. Undeniably, the use of advanced oxidation processes in physical and chemical treatments has played a vital role in helping the technologies to remove the organic pollutants efficiently and reduce the energy consumption or even harvesting the electrons movements in the oxidation process to produce electrical energy. In the present paper, we review several types of wastewater treatment technologies, namely micro-nanobubbles, hybrid electro-Fenton processes, photocatalytic fuel cells, and microbial fuel cells. The aims are to explore the interaction of hydroxyl radicals with pollutants using these wastewater technologies, including their removal efficiencies, optimal conditions, reactor setup, and energy generation. Despite these technologies recording high removal efficiency of organic pollutants, the selection of the technologies is dependent on the characteristics of the wastewater and the daily production volume. Hence the review paper also provides comparisons between technologies as the guidance in technology selection.

Microbial fuel cells for bioelectricity production from waste as sustainable prospect of future energy sector

Microbial fuel cell (MFC) is lauded for its potentials to solve both energy crisis and environmental pollution. Technologically, it offers the capability to harness electricity from the chemical energy stored in the organic substrate with no intermediate steps, thereby minimizes the entropic loss due to the inter-conversion of energy. The sciences underneath such MFCs include the electron and proton generation from the metabolic decomposition of the substrate by microbes at the anode, followed by the shuttling of these charges to cathode for electricity generation. While its promising prospects were mutually evinced in the past investigations, the upscaling of MFC in sustaining global energy demands and waste treatments is yet to be put into practice. In this context, the current review summarizes the important knowledge and applications of MFCs, concurrently identifies the technological bottlenecks that restricted its vast implementation. In addition, economic analysis was also performed to provide multiangle perspectives to readers. Succinctly, MFCs are mainly hindered by the slow metabolic kinetics, sluggish transfer of charged particles, and low economic competitiveness when compared to conventional technologies. From these hindering factors, insightful strategies for improved practicality of MFCs were formulated, with potential future research direction being identified too. With proper planning, we are delighted to see the industrialization of MFCs in the near future, which would benefit the entire human race with cleaner energy and the environment.

Recent advancements in microbial fuel cells: A review on its electron transfer mechanisms, microbial community, types of substrates and design for bio-electrochemical treatment

The development in urbanization, growth in industrialization and deficiency in crude oil wealth has made to focus more for the renewable and also sustainable spotless energy resources. In the past two decades, the concepts of microbial fuel cell have caught more considerations among the scientific societies for the probability of converting, organic waste materials into bio-energy using microorganisms catalyzed anode, and enzymatic/microbial/abiotic/biotic cathode electro-chemical reactions. The added benefit with MFCs technology for waste water treatment is numerous bio-centered processes are available such as sulfate removal, denitrification, nitrification, removal of chemical oxygen demand and biological oxygen demand and heavy metals removal can be performed in the same MFC designed systems. The various factors intricate in MFC concepts in the direction of bioenergy production consists of maximum coulombic efficiency, power density and also the rate of removal of chemical oxygen demand which calculates the efficacy of the MFC unit. Even though the efficacy of MFCs in bioenergy production was initially quietly low, therefore to overcome these issues few modifications are incorporated in design and components of the MFC units, thereby functioning of the MFC unit have improvised the rate of bioenergy production to a substantial level by this means empowering application of MFC technology in numerous sectors including carbon capture, bio-hydrogen production, bioremediation, biosensors, desalination, and wastewater treatment. The present article reviews about the microbial community, types of substrates and information about the several designs of MFCs in an endeavor to get the better of practical difficulties of the MFC technology.

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Trends in microbial degradation and bioremediation of emerging contaminants

Modernization and modern ways of living demands more improved products from pharmaceuticals, cosmetics, and food processing industries. Moreover, industries like pesticides, fertilizers, dyeing, paints, detergent etc., also needs improvised products as per demand. As the new product emerges, the pollutants from these industries also constitute new type of danger to the environment and serious health risks to the living organisms. These emerging contaminants (ECs) are from different category of sources such as personal care products (PCPs), pharmaceuticals (Phcs), endocrine disrupting chemicals (EDCs), etc. These ECs can easily escape from the conventional water treatment and eventually get discharged in to the surface water and thus enters in to the ground water, soil, sediments, and also into the oceans. When these contaminants emerge we also require progress in tremendous process for preventing these hazardous chemicals by effective removal and treatment. For the past 50 years, both developed and developing countries are working on this treatment process and found that Microbial degradation and bioremediation are very useful for effective treatment to prevent their emissions. This treatment can be designed for any sort of ECs since the microbial members are so versatile to redesign their metabolic pathways when subject to exposure. However, implementing bioremediation is not alone efficient to degrade ECs and hence, combination of bioremediation, nanotechnology and physical treatment method will also provide sustainable, potent and fast degradation process. In this Book Chapter, we discuss in detail about the ECs, sources of microbial degradation process and its usefulness in the bioremediation of these ECs.

Application of rotten rice as a substrate for bacterial species to generate energy and the removal of toxic metals from wastewater through microbial fuel cells

Microbial fuel cells (MFCs) are the efficient and sustainable approach for the removal of toxic metals and generate energy concurrently. This article highlighted the effective use of rotten rice as an organic source for bacterial species to generate electricity and decrease the metal concentrations from wastewater. The obtained results were corresponding to the unique MFCs operation where the 510 mV voltage was produced within 14-day operation with 1000 Ω external resistance. The maximum power density and current density were found to be 2.9 mW/m2 and 168.42 mA/m2 with 363.6 Ω internal resistance. Similarly, the maximum metal removal efficiency was found to be 82.2% (Cd), 95.71% (Pb), 96.13% (Cr), 89.50% (Ni), 89.82 (Co), 99.50% (Ag), and 99.88% (Cu). In the biological test, it was found that Lysinibacillus strains, Chryseobacterium strains, Escherichia strains, Bacillus strains are responsible for energy generation and metal removal. Furthermore, a multiparameter optimization revealed that MFCs are the best approach for a natural environment with no special requirements. Lastly, the working mechanism of MFCs and future recommendations are enclosed.

Biocrude Oil Production by Integrating Microalgae Polyculture and Wastewater Treatment: Novel Proposal on the Use of Deep Water-Depth Polyculture of Mixotrophic Microalgae

Microalgae have attracted significant attention worldwide as one of the most promising feedstock fossil fuel alternatives. However, there are a few challenges for algal fuels to compete with fossil fuels that need to be addressed. Therefore, this study reviews the R&D status of microalgae-based polyculture and biocrude oil production, along with wastewater treatment. Mixotrophic algae are free to some extent from light restrictions using organic matter and have the ability to grow well even in deep water-depth cultivation. It is proposed that integrating the mixotrophic microalgae polyculture and wastewater treatment process is the most promising and harmonizing means to simultaneously increase capacities of microalgae biomass production and wastewater treatment with a low land footprint and high robustness to perturbations. A large amount of mixotrophic algae biomass is harvested, concentrated, and dewatered by combining highly efficient sedimentation through flocculation and energy efficient filtration, which reduce the carbon footprint for algae fuel production and coincide with the subsequent hydrothermal liquefaction (HTL) conversion. HTL products are obtained with a relatively low carbon footprint and separated into biocrude oil, solid, aqueous, and gas fractions. Algae biomass feedstock-based HTL conversion has a high biocrude oil yield and quality available for existing oil refineries; it also has a bioavailability of the recycled nitrogen and phosphorus from the aqueous phase of algae community HTL. The HTL biocrude oil represents higher sustainability than conventional liquid fuels and other biofuels for the combination of greenhouse gas (GHG) and energy return on investment (EROI). Deep water-depth polyculture of mixotrophic microalgae using sewage has a high potential to produce sustainable biocrude oil within the land area of existing sewage treatment plants in Japan to fulfill imported crude oil.

Progress in microbial fuel cell technology for wastewater treatment and energy harvesting

The global energy crisis has stimulated the development of various forms of green energy technology such as microbial fuel cells (MFCs) that can be applied synergistically and simultaneously toward wastewater treatment and bioenergy generation. This is because electricigens in wastewater can act as catalysts for destroying organic pollutants to produce bioelectricity through bacterial metabolism. In this review, the factors affecting energy production are discussed to help optimize MFC processes with respect to design (e.g., single, double, stacked, up-flow, sediment, photosynthetic, and microbial electrolysis cells) and operational conditions/parameters (e.g., cell potential, microorganisms, substrate (in wastewater), pH, temperature, salinity, external resistance, and shear stress). The significance of electron transfer mechanisms and microbial metabolism is also described to pursue the maximum generation of power by MFCs. Technically, the generation of power by MFCs is still a significant challenge for real-world applications due to the difficulties in balancing between harvesting efficiency and upscaling of the system. This review summarizes various techniques used for MFC-based energy harvesting systems. This study aims to help narrow such gaps in their practical applications. Further, it is also expected to give insights into the upscaling of MFC technology while assisting environmental scientists to gain a better understanding on this energy harvesting approach.

Utilization of Mangifera indica as Substrate to Bioremediate the Toxic Metals and Generate the Bioenergy through a Single-Chamber Microbial Fuel Cell

Microbial fuel cells (MFCs) are a sustainable approach for the remediation of metals and the simultaneous production of energy. This paper highlighted the usage of mango extract to produce electricity as an organic source for bacteria and reduce metal ions from wastewater. The observed results were 51 mV in 15 days with 500 Ω of external resistance. The whole operation was carried out at room temperature. The observed current and power density were 28.947 mA/m2 and 0.972 mW/m2, respectively. The internal resistance was 150 Ω, which is lower than external resistance. The remediation performance varied with the metal ions as follows: Pb (II) shows 75%, Cd (II) shows 74.11%, and Cr (III) shows 80.50%. Finally, the detailed working mechanism of the present study, MFC challenges, and future research directions are covered in this paper.

Improving the anode performance of microbial fuel cell with carbon nanotubes supported cobalt phosphate catalyst

Microbial fuel cell (MFC) is a sustainable technology that can convert waste to energy by harnessing the power of exoelectrogenic bacteria. However, the poor biocompatibility and low electrocatalytic activities of surface usually cause weak bacterial adhesion and low electron transfer efficiency, which seriously hampers the development of MFCs. Herein, a novel carbon nanotube supported cobalt phosphate (CNT/Co-Pi) electrode is fabricated by assembling CNTs on carbon cloth, followed by the electrodeposition of Co-Pi catalyst. The deposited amorphous Co-Pi thin film contains phosphate and the cobalt ions of multiple oxidation states. The hydrophilic phosphate can promote the adhesion of microorganisms on electrode. The strong conversion ability of multiple states of cobalt offers excellent electrocatalytic activity for the electron transfer across biotic/abiotic interface. Therefore, the highly conductive CNTs substrate, along with the Co-Pi catalyst, provide an effective electron transfer between the electrogenic bacteria and the electrode, which endows MFC high power densities up to 1200 mW m^-2. Our work has demonstrated for the first time that CNT/Co-Pi catalyst can promote the interfacial electron transfer between electrogenic bacteria and electrode, and highlighted the application potentials of Co-Pi as an anode catalyst for the fabrication of high performance MFC anodes.