Occurrence of C60 and related fullerenes in the Sava River under different hydrologic conditions

Alleviative effects of C60 fullerene nanoparticles on arsenate transformation and toxicity to Danio rerio

Widely-used C60 fullerene nanoparticles (C60) result in their release into the aquatic environment, which may affect the distribution and toxicity of pollutants such as arsenic (As), to aquatic organism. In this study, arsenate (As(V)) accumulation, speciation and subcellular distribution was determined in Danio rerio (zebrafish) intestine, head and muscle tissues in the presence of C60. Meanwhile we compared how single-walled carbon nanotubes (SWCNTs), multi-walled carbon nanotubes (MWCNTs), graphene oxide (GO) and graphene (GN) nanoparticles alter the behaviors of As(V). Results showed that C60 significantly inhibited As accumulation and toxicity in D. rerio, due to a decrease in total As and monomethylarsonic acid (MMA) and As(V) species concentrations, a lower relative distribution in the metal-sensitive fraction (MSF). It was attributed that C60 may coat As(V) ion channels and consequently, affect the secretion of digestive enzymes in the gut, favoring As excretion and inhibiting As methylation. Similarly, MWCNTs reduced the species concentration of MMA and As(V) in the intestines, low GSH (glutathione) contents in the intestine. Due to the disparity of other carbon-based nanomaterial morphologies, SWCNTs, GO and GN exhibited the various effects on the toxicity of As(V). In addition, the possible pathway of arsenobetaine (AsB) biosynthesis included migration from the intestine to muscle in D. rerio, with the precursor of AsB likely to be 2-dimethylarsinylacetic acid (DMAA). The results of this study suggest that C60 is beneficial for controlling As(V) pollution and reducing the impact of As(V) biogeochemical cycles throughout the ecosystem.

Cotransport of fullerene nanoparticles and montmorillonite colloids in porous media: Critical role of divalent cations of montmorillonite

While the cotransport of carbon nanoparticles (CNPs) and clay colloids in porous media has been widely studied, the influence of the cation exchange capacity (CEC) of clay colloids on the transport process remains unclear. In this study, batch adsorption and column transport experiments were conducted to investigate the fate and transport of CNPs and clay colloids in quartz sand, with respect to the effect of monovalent-cation exchange capacity (mono-CEC), divalent-cation exchange capacity (di-CEC) and total CEC of clays. Fullerene nanoparticles (nC60) and six types of montmorillonite (ML) with different CEC were selected as modeled CNPs and clay colloids, respectively. Transport behavior of nC60 and ML was characterized using breakthrough curves (BTCs) and fitted with two-kinetic-sites colloid transport model. Results of the adsorption experiments showed a good linear correlation between the deposition of nC60 on the sand surface and the di-CEC of ML. Transport of ML and nC60 was inhibited by each other. The calculated mass recovery of nC60, as well as the fitted maximum deposition capacity and attachment rate coefficients of nC60 exhibited a strong linear relationship with the di-CEC of ML. These results indicate that divalent cations in ML interlayers play a significant role in aggregation between nC60 and ML and their cotransport. Through measurements of the particle size and zeta potentials of sole nC60 and mixtures of ML and nC60, FTIR and XPS analysis of nC60 under different conditions, and a release experiment of nC60 in a sand column, it demonstrated cation bridging (Ca2+-π) between nC60 and ML mediated by the divalent cations in ML interlayers. The study highlighted the potential of using di-CEC of clays as an indicator to predict the mobility of nC60 in clay-containing porous media and added insights to the transport behavior of CNPs in porous media.

Coal Fly Ash Decorated with Graphene and Polyaniline Nanocomposites for Effective Adsorption of Hexavalent Chromium and Its Reuse for Photocatalysis

Coal fly ash was functionalized and modified with graphene oxide and polyaniline (CFA/GO/PANI nanocomposite) through hydrothermal synthesis, which was used for remediation of hexavalent chromium (Cr(VI)) ions. Batch adsorption experiments were carried out to investigate the effects of adsorbent dosage, pH, and contact time on the removal of Cr(VI). The ideal pH for this work was 2, and it was used for all other studies. The Cr(VI)-loaded spent adsorbent CFA/GO/PANI + Cr(VI) was reused as a photocatalyst for the degradation of bisphenol A (BPA). The CFA/GO/PANI nanocomposite removed Cr(VI) ions rapidly. The adsorption process was best described by pseudo-second-order kinetics and the Freundlich isotherm model. The CFA/GO/PANI nanocomposite demonstrated a high adsorption capacity of 124.72 mg/g for Cr(VI) removal. In addition, the Cr(VI)-loaded spent adsorbent played a significant role in the photocatalytic degradation of BPA with 86% degradation. The reuse of the Cr(VI)-loaded spent adsorbent as a photocatalyst presents a new solution for the reduction of secondary waste from the adsorption process.

Toxicological effects resulting from co-exposure to nanomaterials and to a β-blocker pharmaceutical drug in the non-target macrophyte species Lemna minor

The wide use of carbon-based materials for various purposes leads to their discharge in the aquatic systems, and simultaneous occurrence with other environmental contaminants, such as pharmaceutical drugs. This co-occurrence can adversely affect exposed aquatic organisms. Up to now, few studies have considered the simultaneous toxicity of nanomaterials, and organic contaminants, including pharmaceutical drugs, towards aquatic plants. Thus, this study aimed to assess the toxic effects of the co-exposure of propranolol (PRO), and nanomaterials based on cellulose nanocrystal, and graphene oxide in the aquatic macrophyte Lemna minor. The observed effects included reduction of growth rate in 13% in co-exposure 1 (nanomaterials + PRO 5 μg L^-1), and 52-64% in co-exposure 2 (nanomaterials + PRO 51.3 mg L^-1), fresh weight reduction of 94-97% in co-exposure 2 compared to control group, and increased pigment production caused by co-exposure treatments. The analysis of PCA showed that co-exposure 1 (nanomaterials + PRO 5 μg L^-1) positively affected growth, and fresh weight, and co-exposure 2 positively affected pigments content. The results suggested that the presence of nanomaterials enhanced the overall toxicity of PRO, exerting deleterious effects in the freshwater plant L. minor, suggesting that this higher toxicity resulting from co-exposure was a consequence of the interaction between nanomaterials and PRO.

Roadmap of environmental health research on emerging contaminants: Inspiration from the studies on engineered nanomaterials

Research on the environmental health of emerging contaminants is critical to understand their risks before causing severe harm. However, the low environmental concentrations, complex behaviors, and toxicology of emerging contaminants present enormous challenges for researchers. Here, we reviewed the research on the environmental health of engineered nanomaterials (ENMs), one of the typical emerging contaminants, to enlighten pathways for future research on emerging contaminants at their initial exploratory stage. To date, some developed pretreatment methods and detection technologies have been established for the determination of ENMs in natural environments. The mechanisms underlying the transfer and transformation of ENMs have been systematically explored in laboratory studies. The mechanisms of ENMs-induced toxicity have also been preliminarily clarified at genetic, cellular, individual, and short food chain levels, providing not only a theoretical basis for revealing the risk change and environmental health effects of ENMs in natural environments but also a methodological guidance for studying environmental health of other emerging contaminants. Nonetheless, due to the interaction of multiple environmental factors and the high diversity of organisms in natural environments, health effects observed in laboratory studies likely differ from those in natural environments. We propose a holistic approach and mesocosmic model ecosystems to systematically carry out environmental health research on emerging contaminants, obtaining data that determine the objectivity and accuracy of risk assessment.

Behavior of two classes of organic contaminants in the presence of graphene oxide: Ecotoxicity, physicochemical characterization and theoretical calculations

Graphene oxide (GO) production has increased considerably and therefore its presence in the environment is inevitable. When in aquatic environment GO can interact with co-existing compounds, modifying their toxicities for several organisms. However, the toxic effects of co-exposure of GO and organic compounds are rarely reported in the literature. Herein, we studied the behavior of four organic aquatic contaminants found in surface water such as 2-phenylbenzotriazoles (non-Cl PBTA-9 and PBTA-9) and phenoxyphenyl pesticides, pyriproxyfen (PYR) and lambdacyhalothrin (LCT), in the presence of GO. GO reduced 90% and 83% of the toxicity of non-Cl PBTA-9 and PBTA for Daphnia. When PBTAs were adsorbed onto GO surface their interactions caused GO agglomeration (up to 20 mm) and consequent precipitation, making PBTAs less bioavailable. PYR and LCT's toxicities increased up to 83% for PYR and 47% for LCT in the presence of GO, because their adsorption on GO lead to the stabilization of the suspensions (up to 0.5 μm). Those particles were then easily ingested and retained in the digestive tract of the daphnids, triggering the Trojan horse effect. Based on theoretical calculations we observed that PBTA compounds are planar, electron-poorer and more reactive than the studied pesticides, suggesting a better stability of the GO/PBTA complexes. PYR and LCT are nonplanar, electron-richer and less reactive towards GO than PBTAs, forming less stable GO complexes that could facilitate the desorption of pesticides, increasing toxic effects. Our results suggest that the properties of the organic toxicants can influence the stability of graphene oxide suspensions, playing a fundamental role in the modulation of their toxicity. Further research is needed for a deep understanding of the behavior of nanomaterials in the presence of contaminants and their effect in the toxicity of aquatic organisms.

Transport of Potentially Toxic Elements in Solid Particulate Matter during Flash Flood Events in Upper and Lower Stretch of the Sava River

During extreme hydrological conditions such as flood events, sediments and alluvial soils may become re-suspended. As a consequence, the concentration of solid particulate matter (SPM) in the water column increases. As sediments represent a sink for the contaminants, when such perturbation occurs, the toxic substances may be re-dissolved into the water, causing harmful effects to the freshwater habitat. The purpose of this study was to evaluate the release of potentially toxic elements associated to SPM during flash floods. Two sampling sites on the Sava River were chosen: Litija (Slovenia), where the river has still the characteristics of an alpine river, and in Belgrade (Serbia), where Sava is a lowland river with a flat riverbed, slower flow and bigger quantities of fine-grained sediment. The results of the study showed a good correlation between the SPM mass concentration and water level/discharge. At both sampling sites, elevated concentrations of As, Cd, Cr, Cu, Pb, Ni and Zn were determined in SPM, indicating a moderate level of contamination at Litija and a high level at Belgrade. The results demonstrated that during the two investigated flash flood events limited the dissolution of PTE from SPM-bearing particles.

Following the Occurrence and Origin of Titanium Dioxide Nanoparticles in the Sava River by Single Particle ICP-MS

Titanium dioxide nanoparticles (TiO2NPs) are widely produced and used NPs in different applications. To evaluate the risk from anthropogenic TiO2NPs, more information is needed on their occurrence in the environment. For the first time, this study reports the levels of TiO2NPs in waters and sediments at selected sampling sites along the Sava River using inductively coupled plasma mass spectrometry in single particle mode (spICP-MS). The highest concentrations of TiO2NPs were determined in river water at Vrhovo (VRH), Jasenovac (JAS), and Slavonski Brod (SLB) sampling locations impacted by urban, agricultural, and/or industrial activities, suggesting that these NPs are likely of anthropogenic origin. The results further showed that hydrological conditions and sediment composition significantly influence the levels of TiO2NPs in river water at most locations. Moreover, the Ti/Al elemental concentration ratios of NPs in water and sediments at JAS were higher than the natural background ratios, further confirming their anthropogenic origin. The outcome of this study provides first information on the presence of (anthropogenic) TiO2NPs in different environmental compartments of the Sava River, contributing to more reliable risk assessments and better regulation of TiO2NPs emissions in the future.

Quantification and Ecological Risk Assessment of Colloidal Fullerenes Nanoparticles in Sediments by Ultrasonic-Assisted Pressurized Liquid Extraction and High Performance Liquid Chromatography

Fullerenes engineered nanomaterials are regarded as emerging environmental contaminants. This is as their widespread application in many consumer products, as well as natural release, increases their environmental concentration. In this work, an ultrasonic-assisted pressurized liquid extraction (UAPLE) method followed by high performance liquid chromatography with ultraviolet-visible detector (HPLC-UV-vis) was developed for extraction and determination of fullerene in sediments. The method was validated and found to be suitable for environmental risk assessment. Thereafter, the method was used for the determination of fullerene (C61-PCBM) in sediment samples collected from Umgeni River, South Africa. The current method allows for adequate sensitivity within the linear range of 0.01–4 µg g⁻¹, method limit detection of 0.0094 µg g⁻¹ and recoveries ranged between 67–84%. All the parameters were determined from fortified sediments samples. The measured environmental concentration (MEC) of fullerene in the sediment samples ranged from not detected to 30.55 µg g⁻¹. To the best of our knowledge, this is the first report on the occurrence and ecological risk assessment of carbonaceous fullerene nanoparticles in African sediments and biosolids.

Behavior of engineered nanoparticles in aquatic environmental samples: Current status and challenges

The increasing use of engineered nanoparticles (ENPs) in consumer products has led to their increased presence in natural water systems. Here, we present a critical overview of the studies that analyzed the fate and transport behavior of ENPs using real environmental samples. We focused on cerium dioxide, titanium dioxide, silver, carbon nanotubes, and zinc oxide, the widely used ENPs in consumer products. Under field scale settings, the transformation rates of ENPs and subsequently their physicochemical properties (e.g., toxicity and bioavailability) are primarily influenced by the modes of interactions among ENPs and natural organic matter. Other typical parameters include factors related to water chemistry, hydrodynamics, and surface and electronic properties of ENPs. Overall, future nanomanufacturing processes should fully consider the health, safety, and environmental impacts without compromising the functionality of consumer products.

Identifying the Phytotoxicity and Defense Mechanisms Associated with Graphene-Based Nanomaterials by Integrating Multiomics and Regular Analysis

The application of graphene-based nanomaterials (GBNs) has attracted global attention in various fields, and understanding defense mechanisms against the phytotoxicity of GBNs is crucial for assessing their environmental risks and safe-by-design. However, the related information is lacking, especially for edible vegetable crops. In the present study, GBNs (0.25, 2.5, and 25 mg/kg plant fresh weight) were injected into the stems of pepper plants. The results showed that the plant defense was regulated by reducing the calcium content by 21.7-48.3%, intercellular CO₂ concentration by 12.0-35.2%, transpiration rate by 8.7-40.2%, and stomatal conductance by 16.9-50.5%. The defense pathways of plants in response to stress were further verified by the downregulation of endocytosis and transmembrane transport proteins, leading to a decrease in the nanomaterial uptake. The phytohormone gibberellin and abscisic acid receptor PYL8 were upregulated, indicating the activation of defense systems. However, reduced graphene oxide and graphene oxide quantum dots trigger stronger oxidative stress (e.g., H₂O₂ and malondialdehyde) than graphene oxide in fruits due to the breakdown of antioxidant defense systems (e.g., cytochrome P450 86A22 and P450 77A1). Both nontargeted proteomics and metabolomics consistently demonstrated that the downregulation of carbohydrate and upregulation of amino acid metabolism were the main mechanisms underlying the phytotoxicity and defense mechanisms, respectively.

Possible role of C60 fullerene in the induction of reproductive toxicity in the freshwater fish, Anabas testudineus (Bloch, 1792)

In recent years, the impact of ultrafine nanomaterials on the aquatic organisms and their ecosystems contributed much concern due to their abundance in environment. Several toxicity studies have reported that nanoparticles induced reproductive stress and resulted in reproductive impairment of fishes. The present study was aimed to investigate the stress-induced toxicity of C₆₀ fullerene nanomaterial on various reproductive parameters of the freshwater fish, Anabas testudineus. Fish were exposed to two sublethal concentrations of fullerene C₆₀, one-tenth (5 mg/L) and one-fifth (10 mg/L) of LC₅₀-96 h, for 4, 7, 15, 30, and 60-day durations. At the end of exposure period, the activities of steroidogenic enzymes, 3β-, and 17β-hydroxysteroid dehydrogenase decreased in the testis and ovary thereby indicated that the nanomaterial affected gonadal steroidogenesis. The level of serum testosterone decreased significantly (p < 0.05) in male whereas the level of estradiol showed significant (p < 0.05) reduction in female fish with significant (p < 0.05) increase in the level of serum cortisol in both sexes in concentration- and time-dependent manner. The analysis of the levels of alkali-labile phosphates, plasma calcium, and total protein showed significant (p < 0.05) reduction in female fish without significant changes in male fish, and this could be due to the antiestrogenic action of fullerene C₆₀ nanomaterial. The activity of aromatase enzyme decreased significantly (p < 0.05) in the ovary and brain of female fish, and the decline in the enzyme activity was prominent only in the brain tissue of male fish. The present results suggested that the stress-induced by fullerene C₆₀ exposure provoked reproductive toxicity in the fish, Anabas testudineus.

Interactions of emerging contaminants with model colloidal microplastics, C60 fullerene, and natural organic matter - effect of surface functional group and adsorbate properties

Surface adsorption of two commonly detected emerging contaminants, amlodipine (AMP) and carbamazepine (CBZ), onto model colloidal microplastics, natural organic matter (NOM), and fullerene nanomaterials have been investigated. It is found that AMP accumulation at these colloidal-aqueous interfaces is markedly higher than that of CBZ. Measurements of surface excess and particle zeta potential, along with pH-dependent adsorption studies, reveal a distinct influence of colloidal functional group on the adsorption properties of these pharmaceuticals. AMP shows a clear preference for a surface containing carboxylic group compared to an amine modified surface. CBZ, in contrast, exhibit a pH-dependent surface proclivity for both of these microparticles. The type of interactions and molecular differences with respect to structural rigidity and charge properties explain these observed behaviors. In this work, we also demonstrate a facile approach in fabricating uniform microspheres coated with NOM and C₆₀ nanoclusters. Subsequent binding studies on these surfaces show considerable adsorption on the NOM surface but a minimal uptake of CBZ by C₆₀. Adsorption induced colloidal aggregation was not observed. These findings map out the extent of contaminant removal by colloids of different surface properties available in the aquatic environment. The methodology developed for the adsorption study also opens up the possibility for further investigations into colloidal-contaminant interactions.

Aggregation behavior of aqu/nC60 produced via extended mixing: Influence of sunlight and agitation intensity

Aggregation of C₆₀, as an important process governing its mobility and toxicity, has been quantitatively investigated. However, effects of sunlight and agitation intensity on the aggregation behavior of aqu/nC₆₀ produced via extended mixing, have not been clarified. Therefore, in the present study, the aggregation behavior of aqu/nC₆₀ produced at 500 and 800 rpm in the absence and presence of sunlight was investigated. Aggregation with increasing concentrations could be accelerated, while changes of Z_ave and zeta potential were not obvious. Critical coagulation concentrations (CCCs) of aqu/nC₆₀ obtained at 800 rpm in the absence/presence of sunlight and that at 500 rpm under sunlight were 330, 205 and 170 mM NaCl, and 10.0, 2.6 and 3.1 mM CaCl₂, respectively. These CCCs indicated that the aqu/nC₆₀ prepared by the extended mixing were more stable than those produced by other methods. Salt-induced aggregation occurred more easily for aqu/nC₆₀ formed under sunlight than that formed in the dark. Extra surface oxidation induced by high agitation intensity remarkably increased the stability of aqu/nC₆₀ in NaCl solutions. In contrast, in CaCl₂ solutions, aqu/nC₆₀ formed at high agitation intensity had similar stability or even inadequate stability to that obtained at low agitation intensity due to the charge neutralization and cross-link bridging.

Occurrence of Cerium-, Titanium-, and Silver-Bearing Nanoparticles in the Besòs and Ebro Rivers

The presence of anthropogenic nanoparticles (NPs) in the aquatic environment has become an emerging concern in terms of environmental and health safety. In the present study, we assessed the presence of Ag-bearing, Ti-bearing, and Ce-bearing NPs in the Barcelona catchment area, including the Besòs River basin and the Barcelona coast, and in the Ebro River Delta, using single particle inductively coupled plasma mass spectrometry (sp-ICP-MS). Ti-NPs and Ce-NPs were ubiquitously detected in surface waters, and their presence was related to a high natural background. Concentrations of Ti-NPs ranged from 23.2 × 10⁶ to 298 × 10⁶ Ti-NPs/L, with high concentrations being detected in areas with little anthropogenic pressure, while the presence of nanosilver (17.9 × 10⁶ to 45.1 × 10⁶ Ag-NPs/L) in the analyzed rivers was limited to certain hotspots close to wastewater treatment plants discharge points. The concentrations of Ce-NPs in the river ranged from 18.1 × 10⁶ to 278 × 10⁶ NPs/L, and they were related to the natural occurrence of the mineral Monazite-(Ce). Overall, the concentrations of these nanomaterials in the Barcelonan coast were significantly attenuated by river-sea environmental dilution. Nevertheless, Ce-NPs were eventually detected in some seawater samples with low levels of lanthanum-NPs, suggesting anthropogenic inputs of nanoCeO₂, probably from atmospheric deposition.

Fullerol C60(OH)24 Nanoparticles Affect Secondary Metabolite Profile of Important Foodborne Mycotoxigenic Fungi In Vitro

Despite the efforts to control mycotoxin contamination worldwide, extensive contamination has been reported to occur in food and feed. The contamination is even more intense due to climate changes and different stressors. This study examined the impact of fullerol C₆₀(OH)₂₄ nanoparticles (FNP) (at 0, 1, 10, 100, and 1000 ng mL^-1) on the secondary metabolite profile of the most relevant foodborne mycotoxigenic fungi from genera Aspergillus, Fusarium, Alternaria and Penicillium, during growth in vitro. Fungi were grown in liquid RPMI 1640 media for 72 h at 29 °C, and metabolites were investigated by the LC-MS/MS dilute and shoot multimycotoxin method. Exposure to FNP showed great potential in decreasing the concentrations of 35 secondary metabolites; the decreases were dependent on FNP concentration and fungal genus. These results are a relevant guide for future examination of fungi-FNP interactions in environmental conditions. The aim is to establish the exact mechanism of FNP action and determine the impact such interactions have on food and feed safety.

Impact of fullerol C60(OH)24 nanoparticles on the production of emerging toxins by Aspergillus flavus

The impact of fullerene C₆₀ water soluble daughter molecules - fullerols C₆₀(OH)₂₄ nanoparticles (FNP) on emerging (non-aflatoxin biosynthetic pathway) toxins production in mycelia and yeast extract sucrose (YES) media of A. flavus was investigated under growth conditions of 29 °C in the dark for a 168 h period. The FNP solution (10, 100 and 1000 ng mL⁻¹) contained predominantly nanoparticles of 8 nm diameter and with zeta potential mean value of −33 mV. Ten emerging metabolites were produced at concentrations reaching 1,745,035 ng 50 mL⁻¹ YES medium. Seven of the metabolites were found in mycelia and media, while three were only in mycelia. Majority of the metabolites were detected in higher quantity in mycelia than in media, at a ratio of 99:1 (m/m). However, higher metabolite quantities were found in media following FNP application, while FNP caused a decrease of total metabolite quantities in mycelia. The concentrations of the metabolites in media increased in the presence of 1000 ng mL⁻¹ FNP while mycelial quantities of the metabolites decreased with increased applied FNP dose. The impacts of global climate changes on FNP availability in the environment and on mycotoxin occurrence in crops increase the relevance of this study for risk assessment of nanoparticles. Cordycepin is reported for the first time as metabolite of A. flavus.

Behavior, remediation effect and toxicity of nanomaterials in water environments

In recent years, nanotechnology has been developing continuously. Due to their advantageous huge specific surface areas, microinterface characteristics, remediation ability and potential environmental risks, nanomaterials have become a hot topic in the field of environmental research. With the mass production and use of nanomaterials, they will inevitably be discharged or leaked into the water environment. In this paper, we will describe some typical nanomaterials, such as nanoscale zero valent iron (nZVI), graphene nanomaterials (GNMs), TiO₂ nanoparticles (NPs), ZnO NPs, Fe₃O₄ NPs, carbon nanotubes (CNTs), Ag NPs, and other nanomaterials in water environments, focusing on the positive and negative effects of some nanomaterials in water environments. The remediation function and the impact of nanomaterials in water environments, including behavior of nanomaterials and their toxicity to aquatic organisms will be discussed. This will be of great significance for our subsequent research on nanomaterials.

Interactions between silver nanoparticles and other metal nanoparticles under environmentally relevant conditions: A review

Global production of engineered nanoparticles (ENPs) continues to increase due to the demand of enabling properties in consumer products and industrial applications. Release of individual or aggregates of ENPs have been shown to interact with one another subsequently resulting in adverse biological effects. This review focuses on silver nanoparticles (AgNPs), which are currently used in numerous applications, including but not limited to antibacterial action. Consequently, the release of AgNPs into the aquatic environment, the dissociation into ions, the binding to organic matter, reactions with other metal-based materials, and disruption of normal biological and ecological processes at the cellular level are all potential negative effects of AgNPs usage. The potential sources of AgNPs includes leaching of intact particles from consumer products, disposal of waste from industrial processes, intentional release into contaminated waters, and the natural formation of AgNPs in surface and ground water. Formation of natural AgNPs is greatly influenced by different chemical parameters including: pH, oxygen levels, and the presence of organic matter, which results in AgNPs that are stable for several months. Both engineered and natural AgNPs can interact with metal and metal oxide particles/nanoparticles. However, information on the chemical and toxicological interactions between AgNPs and other nanoparticles is limited. We have presented current knowledge on the interactions of AgNPs with gold nanoparticles (AuNPs) and titanium dioxide nanoparticles (TiO₂ NPs). The interaction between AgNPs and AuNPs result in stable bimetallic Ag-Au alloy NPs. Whereas the interaction of AgNPs with TiO₂ NPs under dark and light conditions results in the release of Ag⁺ ions, which may be subsequently converted back into AgNPs and adsorb on TiO₂ NPs. The potential chemical mechanisms and toxic effects of AgNPs with AuNPs and TiO₂ NPs are discussed within this review and show that further investigation is warranted.