The identification and health risk assessment of odor emissions from waste landfilling and composting

Emission characteristics, environmental impacts and health risk assessment of volatile organic compounds from the typical chemical industry in China

To study the volatile organic compounds (VOCs) emission characteristics of industrial enterprises in China, 6 typical chemical industries in Yuncheng City were selected as research objects, including the modern coal chemical industry (MCC), pharmaceutical industry (PM), pesticide industry (PE), coking industry (CO) and organic chemical industry (OC). The chemical composition of 91 VOCs was quantitatively analyzed. The results showed that the emission concentration of VOCs in the chemical industry ranged from 1.16 to 155.59 mg/m3. Alkanes were the main emission components of MCC (62.0%), PE (55.1%), and OC (58.5%). Alkenes (46.5%) were important components of PM, followed by alkanes (23.8%) and oxygenated volatile organic compounds (OVOCs) (21.2%). Halocarbons (8.6%-71.1%), OVOCs (9.7%-37.6%) and alkanes (11.2%-27.0%) were characteristic components of CO. The largest contributor to OFP was alkenes (0.6%-81.7%), followed by alkanes (9.3%-45.9%), and the lowest one was alkyne (0%-0.5%). Aromatics (66.9%-85.4%) were the largest contributing components to SOA generation, followed by alkanes (2.6%-28.5%), and the lowest one was alkenes (0%-4.1%). Ethylene and BTEX were the key active species in various chemical industries. The human health risk assessment showed workers long-term exposed to the air in the chemical industrial zone had a high cancer and non-cancer risk during work, and BTEX and dichloromethane were the largest contributors.

Dual mechanism of membrane covering on GHG and NH3 mitigation during industrial-scale experiment on dairy manure composting: Inhibiting formation and blocking emissions

An industrial-scale experiment on dairy manure composting with the control group (Ctrl) and the membrane covering group (CM) was conducted to explore the effects of functional membrane covering on gas emissions, the conversion of carbon and nitrogen, and revealing the underlying mechanisms. Results indicated that CM achieved the synergistic effects on gas mitigation and improved compost product quality. CO2, CH4, N2O, and NH3 emissions were reduced by 81.8%, 87.0%, 82.6%, and 82.2%, respectively. The micro-aerobic condition formed in membrane covering compost pile together with the covering inhibiting effect dominated the mitigation effect. CM significantly downregulated the mcrA gene copies and the value of mcrA/pmoA (p < 0.01), which reduced CH4 emission. CM decreased the nirS and nirK gene copies and increased the nosZ gene copies to reduce N2O emission. Functional Annotation of Prokaryotic Taxa showed that membrane covering effectively amended part of carbon and nitrogen cycles, which stimulated the degradation of organic matter, accelerated compost maturity and reduced the gaseous emissions.

Health risk assessment of municipal solid waste incineration emissions based on regression analysis

This study examined the potential health risks posed by the operation of 96 waste-to-energy (WtE) plants in 30 cities in the Bohai Rim of China. Utilizing a sophisticated simulation approach, the Weather Research and Forecasting (WRF) model coupled with the California Puff (CALPUFF) model, we obtained the spatial distribution of pollutants emitted by WtE plants in the atmosphere. Hazard indices (HI) and cancer risks (CR) were calculated for each plant using the United States Environmental Protection Agency's recommended methodologies. The results indicated that both HIs and CRs were generally low, with values below the accepted threshold of 1.0 and 1.0 × 10-6, respectively. Specifically, the average HI and CR values for the entire study area were 2.95 × 10-3 and 3.43 × 10-7, respectively. However, some variability in these values was observed depending on the location and type of WtE plant. A thorough analysis of various parameters, such as waste composition, moisture content, and operating conditions, was conducted to identify the factors that influence the health risks associated with incineration. The findings suggest that proper waste sorting and categorization, increased cost of construction, and elevated height of chimneys are effective strategies for reducing the health risks associated with incineration. Overall, this study provides valuable insights into the potential health risks associated with WtE plants in the Bohai Rim region of China. The findings can serve as useful guidelines for law enforcement wings and industry professionals seeking to minimize the risks associated with municipal solid waste (MSW) management and promote sustainable development.

Intelligent technologies powering clean incineration of municipal solid waste: A system review

Cleanliness has been paramount for municipal solid waste incineration (MSWI) systems. In recent years, the rapid advancement of intelligent technologies has fostered unprecedented opportunities for enhancing the cleanliness of MSWI systems. This paper offers a review and analysis of cutting-edge intelligent technologies in MSWI, which include process monitoring, intelligent algorithms, combustion control, flue gas treatment, and particulate control. The objective is to summarize current applications of these techniques and to forecast future directions. Regarding process monitoring, intelligent image analysis has facilitated real-time tracking of combustion conditions. For intelligent algorithms, machine learning models have shown advantages in accurately forecasting key process parameters and pollutant concentrations. In terms of combustion control, intelligent systems have achieved consistent prediction and regulation of temperature, oxygen content, and other parameters. Intelligent monitoring and forecasting of carbon monoxide and dioxins for flue gas treatment have exhibited satisfactory performance. Concerning particulate control, multi-objective optimization facilitates the sustainable utilization of fly ash. Despite remarkable progress, challenges remain in improving process stability and monitoring instrumentation of intelligent MSWI technologies. By systematically summarizing current applications, this timely review offers valuable insights into the future upgrade of intelligent MSWI systems.

Volatile Organic Compounds on Rhodes Island, Greece: Implications for Outdoor and Indoor Human Exposure

Volatile organic compounds (VOC) are considered a class of pollutants with a significant presence in indoor and outdoor air and serious health effects. The aim of this study was to measure and evaluate the levels of outdoor and indoor VOCs at selected sites on Rhodes Island, Greece, during the cold and warm periods of 2023. Spatial and seasonal variations were evaluated; moreover, cancer and non-cancer inhalation risks were assessed. For this purpose, simultaneous indoor-outdoor air sampling was carried out on the island of Rhodes. VOCs were determined by Thermal Desorption-Gas Chromatography/Mass Spectroscopy (TD-GC/MS). Fifty-six VOCs with frequencies ≥ 50% were further considered. VOC concentrations (∑56VOCs) at all sites were found to be higher in the warm period. In the warm and cold sampling periods, the highest concentrations were found at the port of Rhodes City, while total VOC concentrations were dominated by alkanes. The Positive Matrix Factorization (PMF) model was applied to identify the VOC emission sources. Non-cancer and cancer risks for adults were within the safe levels.

A critical review on characterization, human health risk assessment and mitigation of malodorous gaseous emission during the composting process

Composting has emerged as a suitable method to convert or transform organic waste including manure, green waste, and food waste into valuable products with several advantages, such as high efficiency, cost feasibility, and being environmentally friendly. However, volatile organic compounds (VOCs), mainly malodorous gases, are the major concern and challenges to overcome in facilitating composting. Ammonia (NH3) and volatile sulfur compounds (VSCs), including hydrogen sulfide (H2S), and methyl mercaptan (CH4S), primarily contributed to the malodorous gases emission during the entire composting process due to their low olfactory threshold. These compounds are mainly emitted at the thermophilic phase, accounting for over 70% of total gas emissions during the whole process, whereas methane (CH4) and nitrous oxide (N2O) are commonly detected during the mesophilic and cooling phases. Therefore, the human health risk assessment of malodorous gases using various indexes such as ECi (maximum exposure concentration for an individual volatile compound EC), HR (non-carcinogenic risk), and CR (carcinogenic risk) has been evaluated and discussed. Also, several strategies such as maintaining optimal operating conditions, and adding bulking agents and additives (e.g., biochar and zeolite) to reduce malodorous emissions have been pointed out and highlighted. Biochar has specific adsorption properties such as high surface area and high porosity and contains various functional groups that can adsorb up to 60%-70% of malodorous gases emitted from composting. Notably, biofiltration emerged as a resilient and cost-effective technique, achieving up to 90% reduction in malodorous gases at the end-of-pipe. This study offers a comprehensive insight into the characterization of malodorous emissions during composting. Additionally, it emphasizes the need to address these issues on a larger scale and provides a promising outlook for future research.

Climatic conditions and concentrations of BTEX compounds in atmospheric media

Climatic and meteorological conditions are among the factors affecting the ambient concentrations of BTEX compounds. This systematic review and meta-analysis aimed to interrogate the seasonal effect of climatic conditions on the concentrations of BTEX compounds. Three electronic bibliographic databases including Scopus, PubMed, and Web of Science were systematically searched up to November 14, 2023. The search algorithm followed PRISMA guidance and consisted of three groupings of keywords and their possible combinations. For various climatic conditions, the overall mean and 95% confidence interval (CI) of effect size related to BTEX concentrations were calculated using a random-effect model. In total, 104 articles were included for evaluation in this review. BTEX ambient concentration was higher in winter (ranging from 36 out of 79 relevant studies for xylene to 52 out of 97 relevant studies for benzene) followed by summer and autumn. For humidity conditions, the highest exposure values for BTEX were detected for rainy weather (ranging from 3 out of 5 relevant studies for toluene and xylene to 4 out of 5 relevant studies for benzene and ethyl benzene) compared to dry conditions. The pooled concentration (μg/m3) of benzene, toluene, ethyl benzene, and xylene were computed as 2.61, 7.12, 2.21, and 3.61 in spring, 2.13, 7.53, 1.61, and 2.75 in summer, 3.04, 9.59, 3.14, and 5.50 in autumn, and 3.56, 8.71, 2.35, and 3.91 in winter, respectively. Moreover, the pooled concentrations (μg/m3) of BTEX were measured as 2.98, 7.22, 1.90, and 3.03 in dry weather and 3.15, 6.30, 2.14, and 3.86 in rainy or wet weather, respectively. In most seasons, the ambient concentrations of BTEX were higher in countries with low and middle incomes and in Middle Eastern countries and East/Southeast Asia compared to those in other regions (P < 0.001). The increasing concentrations of BTEX in winter and autumn followed by the summer season and during rainy/wet weather appear to be reasonably consistent despite variations in study methods, quality, or geography. Therefore, it is recommended that more serious control measures are considered for decreasing exposure to BTEX in these climatic conditions.

Impact of dietary digestible aromatic amino acid levels and stachyose on growth, nutrient utilization, and cecal odorous compounds in broiler chickens

This study evaluated the impact of dietary digestible aromatic amino acid (DAAA) levels and stachyose on growth, nutrient utilization and cecal odorous compounds in broiler chickens. A 3×2 two-factor factorial design: Three dietary DAAA levels (1.40, 1.54, 1.68%) supplemented with either 5 g/kg of stachyose or without any stachyose were used to create 6 experimental diets. Each diet was fed to 6 replicates of 10 birds from d 22 to 42. Findings revealed that broilers receiving a diet with 1.54% DAAA levels supplemented with 5 g/kg stachyose exhibited a significant boost in average daily gain and improved utilization of crude protein, ether extract, tryptophan, and methionine compared to other diet treatments (P < 0.05). As the dietary DAAA levels increased, there was a significant rise in the concentrations of indole, skatole, p-methylphenol, and butyric acid in the cecum of broilers (P < 0.05). The addition of stachyose to diets reduced concentrations of indole, skatole, phenol, p-methylphenol, acetic acid and propionic acid in the cecum (P < 0.05). The lowest concentrations of indole, phenol, p-methylphenol, volatile fatty acids and pH in cecum of broilers were observed in the treatment which diet DAAA level was 1.40% with stachyose (P < 0.05). In conclusion, dietary DAAA levels and stachyose had significant interactions on the growth, main nutrient utilization and cecal odorous compounds in broilers. The dietary DAAA level was 1.54% with 5 g/kg of stachyose can improve the growth performance, nutrient utilization. However, the dietary DAAA level was 1.40% with stachyose was more beneficial to decrease the cecal odor compound composition in broilers.

Derivation of human health and odor risk control values for soil ammonia nitrogen by incorporating solid-liquid partitioning, ammonium/ammonia equilibrium: A case study of a retired nitrogen fertilizer site in China

Nitrogen fertilizer supports agricultural intensification, but its manufacturing results in substantial contaminated sites. Ammonia nitrogen is the main specific pollutant in retired nitrogen fertilizer sites with potential human health and odor risks. However, few studies focus on ammonia nitrogen risk assessment at contaminated sites, particularly considering its solid-liquid partitioning process (Kd) and ammonium/ammonia equilibrium process (R) in the soil. This study took a closed nitrogen fertilizer factory site as an example and innovatively introduced Kd and R to scientifically assess the human health and odor risk of ammonia nitrogen. The risk control values (RCVs) of ammonia nitrogen based on human health and odor risk were also derived. The maximum concentration of ammonia nitrogen was 3380 mg/kg in the unsaturated soil, which was acceptable for human health because the health RCVs were 5589 ∼ 137,471 mg/kg in various scenarios. However, odor risk was unacceptable for RCVs were 296 ∼ 1111 mg/kg under excavation scenarios and 1118 ∼ 35,979 mg/kg under non-excavation scenarios. Of particular concern, introducing Kd and R in calculation increased the human health and odor RCVs by up to 27.92 times. Despite the advancements in ammonia risk assessment due to the introduction of Kd and R, odor risk during excavation remains a vital issue. These findings inform a more scientific assessment of soil ammonia risk at contaminated sites and provide valuable insights for the management and redevelopment of abandoned nitrogen fertilizer plant sites.

The effect of biological methods for MSW treatment on the physicochemical, microbiological and phytotoxic properties of used biofilter bed media

Biofilters are commonly used in municipal solid waste treatment (MSW) facilities to remove odors and pollutants from process gases. However, the effectiveness of biofilter bed media decreases over time, necessitating periodic replacement. The type of the treatment process may affect the lifespan of the bed and the way it should be utilized after replacement. This study aimed to analyze the physical, chemical, calorific, microbiological, and phytotoxic parameters of bed media in biofilters operated at an industrial scale in MSW treatment plants. The experiments included three full cycles of biofiltering gases from biodrying, composting, and aerobic biostabilization in two variations. Physicochemical properties (moisture, organic matter, carbon, nitrogen, sulfur, heavy metal contents), respiration activity (AT4), phytotoxicity, and microorganism abundance were determined for initial materials and samples from two biofilter layers collected after each cycle. Results revealed a substantial reduction in AT4 (by 63%-87% compared to initial material), significant moisture content increase in the bottom layers (by 61% or more, depending on the process), and a considerable decrease in microorganism abundance. Biofilter bed media from biodrying and composting exhibited low environmental risk (low heavy metal concentrations, negligible phytotoxicity, and microbiological stability). However, bed packings from aerobic biostabilization processes showed significant inhibition of indicator plants and incomplete sanitization (presence of pathogens like E. coli and Salmonella spp.). Therefore, these bed packings can be utilized for energy recovery, such as incineration after drying. This research provides significant insights into the effectiveness and safety of biofilter bed media in MSW treatment plants.

Assessing the spatial distribution of odor at an urban waterfront using AERMOD coupled with sensor measurements

Impressions of a place are partly formed by smell. The urban waterfronts often leave a rather poor impression due to odor pollution, resulting in recurring complaints. The nature of such complaints can be subjective and vague, so there is a growing interest in quantitative measurements of emissions to explore the causes of malodorous influence. In the present work, an air quality monitor with an H2S sensor was employed to continuously measure emissions of malodors at 1-min resolution. H2S is often considered to be the predominant odorous substance from sludge and water bodies as it is readily perceptible. The integrated means of concentration from in situ measurements were combined with the AERMOD dispersion model to reveal the spatial distribution of odor concentrations and estimate the extent of odor-prone areas at a daily time step. Year-long observations showed that the diurnal profile exhibits a positively skewed distribution. Meteorology plays a vital role in odor dispersion; the degree of dispersion was explored on a case-by-case basis. There is a greater likelihood of capturing the concentration peaks at night (21:00 to 6:00) as the air is more stable then with less tendency for vertical mixing but favors a horizontal spread. This study indicates that malodors are changeable in time and space and establishes a new approach to using H2S sensor data and resolves a long-standing question about odor in Hong Kong.Implications: this study establishes a new approach combining dispersion model with novel H2S sensor data to understand the characteristics and pattern of odor emanated from the urban waterfront in Hong Kong. The sensor has dynamic concentration range to detect the episodic level of H2S and low level at background conditions. It provides more complete information in relation to odor annoyance, as well as quantitative information useful for odor regulation.

Determining the soil odor control area: A case study of an abandoned organophosphorus pesticide factory in China

Currently, soil odor-active substance screening and evaluation methods for contaminated sites are underdeveloped, with unclear treatment objectives and areas. Consequently, some sites suffer from odor issues during and even after remediation. This study focused on an organophosphorus pesticide factory site in Guangdong Province, China. It established a method of determining the odorant control area using a comprehensive approach combining instrumental and olfactory soil sample analyses. The main odor-active substances identified were ethylbenzene, phenol, m, p-xylene, styrene, toluene, and o-xylene, with odorant control values (the limit of odor-active substance contents) of 35.2, 28.1, 8.0, 11.3, 40.2 and 89.3 mg/kg respectively. Instrumental analysis of soil samples revealed 11 sampling points where the main odor-causing substances exceeded standard levels. Among the substances, ethylbenzene (1.48E+04 mg/kg) had the highest content, exceeding the limit up to 421-fold. Olfactory analysis indicated 14 sampling points with odor intensity surpassing the standard (OI > 2). Based on the instrumental analysis results and the odorant control value, the initial estimated odor control area (area with the risk of odor nuisance) was 5.64E+03 m2. Incorporating the olfactory analysis findings, the control area was adjusted by 1.25E+03 m2, leading to a final calculated soil odor control area of 6.89E+03 m2 for the study site. The comprehensive approach to analyzing soil samples for odor control can help evaluate the extent of soil odor pollution in contaminated sites and provide a scientific basis for effectively removing and managing odor-causing substances in soil.

VOC emitted by biopharmaceutical industries: Source profiles, health risks, and secondary pollution

The biopharmaceutical industry contributes substantially to volatile organic compounds (VOCs) emissions, causing growing concerns and social developmental conflicts. This study conducted an on-site investigation of the process-based emission of VOCs from three biopharmaceutical enterprises. In the workshops of the three enterprises, 26 VOCs were detected, which could be sorted into 4 classes: hydrocarbons, aromatic hydrocarbons, oxygen-containing compounds, and nitrogen-containing compounds. Ketones were the main components of waste gases, accounting for 44.13%-77.85% of the overall VOCs. Process-based source profiles were compiled for each process unit, with the fermentation and extraction units of tiamulin fumarate being the main source of VOC emissions. Dimethyl heptanone, vinyl acetate, diethylamine, propylene glycol methyl ether (PGME), and benzene were screened as priority pollutants through a fuzzy comprehensive evaluation system. Ground level concentration simulation results of the Gauss plume diffusion model demonstrated that the diffusivity of VOCs in the atmosphere was relatively high, indicating potential non-carcinogenic and carcinogenic risks 1.5-2 km downwind. Furthermore, the process-based formation potentials of ozone and secondary organic aerosols (SOAs) were determined and indicated that N-methyl-2-pyrrolidone, dimethyl heptanone, and PGME should be preferentially controlled to reduce the ozone formation potential, whereas the control of benzene and chlorobenzene should be prioritized to reduce the generation of SOAs. Our results provide a basis for understanding the characteristics of VOC emission by biopharmaceutical industries and their diffusion, potentially allowing the development of measures to reduce health risks and secondary pollution.

Effects of operating conditions on the in situ control of sulfur-containing odors by using a novel alternative landfill cover and its transformation mechanism

Sulfur-containing gases are main sources of landfill odors, which has become a big issue for pollution to environment and human health. Biocover is promising for treating landfill odors, with advantages of durability and environmental friendliness. In this study, charcoal sludge compost was utilized as the main effective component of a novel alternative landfill cover and the in situ control of sulfur-containing odors from municipal solid waste landfilling process was simulated under nine different operating conditions. Results showed that five sulfur-containing odors (hydrogen sulfide, H2S; methyl mercaptan, CH3SH; dimethyl sulfide, CH3SCH3; ethylmercaptan, CH3CH2SH; carbon disulfide, CS2) were monitored and removed by the biocover, with the highest removal efficiencies of 77.18% for H2S, 87.36% for CH3SH, and 92.19% for CH3SCH3 in reactor 8#, and 95.94% for CH3CH2SH and 94.44% for CS2 in reactor 3#. The orthogonal experiment showed that the factors influencing the removal efficiencies of sulfur-containing odors were ranked from high to low as follows: temperature > weight ratio > humidity content. The combination of parameters of 20% weight ratio, 25°C temperature, and 30% water content was more recommended based on the consideration of the removal efficiencies and economic benefits. The mechanisms of sulfur conversion inside biocover were analyzed. Most organic sulfur was firstly degraded to reduced sulfides or element sulfur, and then oxidized to sulfate which could be stable in the layer as the final state. In this process, sulfur-oxidizing bacteria play a great role, and the distribution of them in reactor 1#, 5#, and 8# was specifically monitored. Bradyrhizobiaceae and Rhodospirillaceae were the dominant species which can utilize sulfide as substance to produce sulfate and element sulfur, respectively. Based on the results of OUTs, the biodiversity of these sulfur-oxidizing bacteria, these microorganisms, was demonstrated to be affected by the different parameters. These results indicate that the novel alternative landfill cover modified with bamboo charcoal compost is effective in removing sulfur odors from landfills. Meanwhile, the findings have direct implications for addressing landfill odor problems through parameter adjustment.

Combined assessment of health hazard and odour impact of soils at a contaminated site: a case study on a defunct pharmaceuticals factory in China

Surveys and assessments of contaminated sites primarily focus on hazardous pollutants in the soil with less attention paid to odorants. This makes the management of contaminated sites difficult. In this study, hazardous and odorous pollutants in the soil were assessed for a large site that was previously used for production of pharmaceuticals to determine the degree and characteristics of soil contamination at pharmaceutical production sites, for undertaking rational remediation measures. The main hazardous pollutants at the study site were triethylamine, n-butyric acid, benzo(a)pyrene (BaP), N-nitrosodimethylamine (NDMA), dibenzo(a,h)anthracene (DBA), total petroleum hydrocarbons (C10-C40) (TPH), and 1,2-dichloroethane; TEA, BA, and isovaleric acid (IC) were the main odorants. As the type and distribution of hazardous and odorous pollutants differ, it is necessary to separately assess the impact of these pollutants at a contaminated site. Soils in the surface layer pose significant non-carcinogenic (HI = 68.30) and carcinogenic risks (RT = 3.56E-5), whereas those in the lower layer only pose non-carcinogenic risks (HI > 7.43). Odorants were found at considerable concentrations both in the surface and lower layers, with the maximum concentrations being 29,309.91 and 41.27, respectively. The findings of this study should improve our understanding of soil contamination at former pharmaceutical production sites and should inform the assessment of the risks posed by contaminated sites, with problems associated with odour, and possible remediation strategies.

Cl atoms-initiated degradation of 1-Chlorobutane and 2-Chlorobutane: Kinetics, product analysis and atmospheric implications

The relative rate method was employed to investigate the kinetics of the Cl-initiated reactions of 1-chlorobutane (1-CB) and 2-chlorobutane (2-CB) over 263-363 K, and the measured rate coefficients at room temperature are (1.04 ± 0.24) × 10-10 and (5.84 ± 0.27) × 10-11 cm3 molecule-1 s-1, respectively. The Arrhenius equations for the title reactions were derived to be k1-CB + Cl (T = 263-363 K) = (2.77 ± 0.72) × 10-11 exp [(422 ± 79)/T] and k2-CB + Cl (T = 263-363 K) = (1.40 ± 0.32) × 10-11 exp [(415 ± 70)/T] cm3 molecule-1 s-1, respectively. The products were analysed qualitatively using gas chromatography-mass spectrometry (GC-MS), and the reaction mechanism was proposed for the reactions. The rate coefficients for the title reactions were calculated computationally over the temperature range of 200-400 K using canonical variational transition state theory with appropriate tunnelling corrections at CCSD(T)/6-311++G(2d,2p)//BHandHLYP/6-311++G(2d,2p) level of theory to complement our experimentally measured kinetic parameters. The experimental and theoretical data obtained were used to evaluate the impact of the studied molecules in the troposphere.

Exploring the link between sulphur-containing compounds and noxious odours at waste management facilities: implications for odour monitoring and mitigation strategies

With this study we challenge the widely held assumption that sulphur-containing compounds in ambient air are good indicators of the presence noxious odours near waste management facilities. We analysed an extensive set of olfactometric data and data on the concentrations of hydrogen sulphide and trace sulphur compounds (TSCs) near a waste management facility in Croatia in 2021. The results show that the presence of noxious odours significantly correlates only with the concentrations of hydrogen sulphide and methyl mercaptan in ambient air but not with other measured TSCs. Thus, in addition to the measurement of pollutants in ambient air, Integrated Pollution and Prevention Control (IPPC) permits should mandate olfactometric measurements to detect and mitigate noxious odours near waste management facilities.

A critical review on odor measurement and prediction

Odor pollution has become a global environmental issue of increasing concern in recent years. Odor measurements are the basis of assessing and solving odor problems. Olfactory and chemical analysis can be used for odor and odorant measurements. Olfactory analysis reflects the subjective perception of human, and chemical analysis reveals the chemical composition of odors. As an alternative to olfactory analysis, odor prediction methods have been developed based on chemical and olfactory analysis results. The combination of olfactory and chemical analysis is the best way to control odor pollution, evaluate the performances of the technologies, and predict odor. However, there are still some limitations and obstacles for each method, their combination, and the prediction. Here, we present an overview of odor measurement and prediction. Different olfactory analysis methods (namely, the dynamic olfactometry method and the triangle odor bag method) are compared in detail, the latest revisions of the standard olfactometry methods are summarized, and the uncertainties of olfactory measurement results (i.e., the odor thresholds) are analyzed. The researches, applications, and limitations of chemical analysis and odor prediction are introduced and discussed. Finally, the development and application of odor databases and algorithms for optimizing odor measurement and prediction methods are prospected, and a preliminary framework for an odor database is proposed. This review is expected to provide insights into odor measurement and prediction.

Improving VOC control strategies in industrial parks based on emission behavior, environmental effects, and health risks: A case study through atmospheric measurement and emission inventory

Industrial parks have a very important impact on regional economic development, but the extremely complex and relatively concentrated volatile organic compound (VOC) emissions from industrial parks also result in it being difficult to control VOCs. In this study, we took a large integrated industrial park in the upper reaches of the Yangtze River as an example, conducted a 1-year monitoring campaign of ambient air VOCs, and established a speciated VOC emission inventory based on the measured chemical profiles of the key industries. The comprehensive control index (CCI) of 125 VOCs was evaluated using the entropy weighting method based on comprehensive consideration of three aspects, namely, emission behavior, environmental effects, and health risks of VOCs, to identify priority VOC species and their key sources for VOC control in industrial parks. The total estimated VOC emissions in the industrial park in 2019 were 6446.96 t. Steel production, sewage treatment, natural gas chemical industry, pharmaceuticals, and industrial boilers were the main sources of VOC emissions. In terms of VOC components, halocarbons, aromatics, and OVOCs were the largest groups of VOCs emitted from the industrial park, accounting for 73.75 % of the total VOC emissions. Using the entropy weighting method, we evaluated the index weights of five parameters: emissions, ozone formation potential, secondary organic aerosol formation potential, hazard quotient, and lifetime cancer risk. Based on the CCI, five control levels for VOC species were further established. The VOC species in Level I and Level II, which contain species such as naphthalene, 2-chlorotoluene, benzene, acrolein, and chloroform, should be considered as extremely important priority control species. These results serve as a reference for the development of precise control strategies for VOCs in industrial parks.

Investigation of biochar amendments on odor reduction and their characteristics during food waste co-composting

The odor emission such as ammonia (NH₃) and hydrogen sulfide (H₂S) during the composting process is a severe problem that adversely affects the environment and human health. Therefore, this study aimed to (1) evaluate the variation of physicochemical characteristics during the co-composting of food waste, and sawdust mixed biochar; (2) assess the efficiency of biochar-composting combined amendment materials for reducing odor emissions and their maturity. The raw materials including food waste (FW), straw dust (SD), and biochar (BC) were prepared and homogeneously mixed with the weight ranging from 120.0 kg to 135.8 kg with five treatments, BC0 (Control), BC1 (5 % biochar), BC2 (5 % distilled water washed biochar), BC3 (10 % biochar), BC4 (20 % biochar). Adding biochar could change physicochemical properties such as temperature, moisture, and pH during composting. The results indicated applying biochar-composting covering to minimalized NH₃ and H₂S aided by higher porous structure and surface functional groups. Among trials, biochar 20 % obtained the lowest NH₃ (2 ppm) and H₂S (3 ppm) emission on day 16 and stopping their emission on day 17. The NH₃/NH₄⁺ adsorption on large specific surface areas and highly porous micro-structure of biochar lead to reduced nitrogen losses, while nitrification (NH₄⁺ ➔ NO₂^- ➔ NO₃^-) may also contribute to nitrogen retention. The H₂S concentration decreased with increasing the biochar proportion, suggesting that biochar could reduce the H₂S emission. Correlation analysis illustrated that temperature, moisture, and oxygen are the most critical factors affecting H₂S and NH₃ emissions (p <0.05). The physicochemical properties and seed germination index indicated that the compost was mature without phytotoxicity. These novelty findings illustrated that the biochar amendment is an effective solution to reduce odor emission and enhances the maturity of compost mixture, which is promising to approach in real-scale conditions and could apply in agricultural fields.

Enhancing Hydrogen Sulfide Detection at Room Temperature Using ZIF-67-Chitosan Membrane

Developing new materials for energy and environment-related applications is a critical research field. In this context, organic and metal-organic framework (MOF) materials are a promising solution for sensing hazardous gases and saving energy. Herein, a flexible membrane of the zeolitic imidazole framework (ZIF-67) mixed with a conductivity-controlled chitosan polymer was fabricated for detecting hydrogen sulfide (H₂S) gas at room temperature (RT). The developed sensing device remarkably enhances the detection signal of 15 ppm of H₂S gas at RT (23 °C). The response recorded is significantly higher than previously reported values. The optimization of the membrane doping percentage achieved exemplary results with respect to long-term stability, repeatability, and selectivity of the target gas among an array of several gases. The fabricated gas sensor has a fast response and a recovery time of 39 s and 142 s, respectively, for 15 ppm of H₂S gas at RT. While the developed sensing device operates at RT and uses low bias voltage (0.5 V), the requirement for an additional heating element has been eliminated and the necessity for external energy is minimized. These novel features of the developed sensing device could be utilized for the real-time detection of harmful gases for a healthy and clean environment.

Emission of odor pollutants and variation in microbial community during the initial decomposition stage of municipal biowaste

Odor pollution often occurs in the initial decomposition stage of municipal biowaste, including throwing/collection and transportation. However, this aspect of odor impact from municipal biowaste has not been well studied. In this study, a practical dustbin (120 L) equipped with flux chamber and filled with three types of municipal biowaste was used to simulate garbage storage conditions. The result indicated that the emission rate of odor pollutants for uncooked food waste (UFW) represented a nearly linear growth trend, reaching the maximum (3963 ± 149 μg kg^-1 DM h^-1) at 72 h. Cooked food waste (CFW) increased rapidly from 8 h to 24 h, and then remain fluctuated, reached the maximum (2026 ± 77 μg kg^-1 DM h^-1) at 72 h. Comparatively, household kitchen waste (HKW) reached the maximum emission rate (10,396 ± 363 μg kg^-1 DM h^-1) at 16 h. Sulfide and aldehydes ketones were identified as dominant odor contributor to UFW and CFW, respectively. While aldehydes ketones and sulfides were both dominant odor contributor to HKW. Moreover, the microbial diversity analysis suggests that Acinetobacter was the dominant genus in UFW, and Lactobacillus was the dominant genus in CFW and HKW. In addition, it was evident that each odorous pollutant was significantly associated with two or more bacterial genera, and most bacterial genera such as Acinetobacter, were also significantly associated with multiple odorous pollutants. The variation of odorants composition kept consistent with microbial composition. The present study could provide essential evidence for a comprehensive understanding of odorant generation in the initial decomposition stage of municipal biowaste. It could contribute to setting out strategies for odor control and abatement in municipal biowaste management systems.

Inhalation health risk assessment of incineration and landfill in the Bohai Rim, China

An inhalation health risks assessment of 96 waste to energy (WtE) plants and 178 landfills in the Bohai Rim, located in northeast China, has been conducted. Based on the latest emission inventories in 2020, WRF/CALPUFF was used to simulate the diffusion of pollutants. Population-weighted hazard index (HI) and carcinogenic risk (CR) of incineration and landfill for each pollutant and each target organ impacted were calculated. The health risks of incineration and landfill were correlated with per capita municipal solid waste (MSW) disposal quantity, emission factors, pollutant toxic effects and local migration and diffusion conditions. The HI of incineration and landfill in the Bohai Rim were 4.07 × 10^-3 and 4.79 × 10^-3, respectively, which was lower than the acceptable level (HI < 1), while the CR of incineration and landfill were 4.72 × 10^-7 and 2.58 × 10^-7, respectively, which was also lower than the acceptable level (CR < 1 × 10^-6). The non-carcinogenic risks of incineration mainly targeted respiratory system and development system, while the non-carcinogenic risks of landfill mainly targeted nervous system and respiratory system. The carcinogenic risks of incineration mainly targeted respiratory system and digestive system, while the carcinogenic risks of landfill mainly targeted hepatic system and respiratory system. With the trend that incineration phase in, while landfill phase out, the number of patients for 15 target organ diseases caused by the disposal of unit mass MSW would decrease in the Bohai Rim, ranging from 1.8 × 10^-8 - 1.8 × 10^-2 (pop/t)，especially in developed provinces, such as Beijing and Tianjin. However, the number of patients for 4 target organ diseases caused by the disposal of unit mass MSW would increase, ranging from 1.18 × 10^-6 - 5.28 × 10^-3 (pop/t). Based on pollutants' pathogenic mechanisms, this study innovatively accessed and compared incineration and landfill's health risks of target organs, and provide technical and policy suggestions based on the changing trend of MSW disposal methods in the future.

Odor emission rate of a municipal solid waste sanitary landfill during different operation stages before final closure

This study investigated the odor emission rate from different areas of a municipal solid waste landfill. The surface odor emission rate (SOER) of eight odorous compound groups were determined by flux chamber method. The SOER of working face, seams of daily cover, membrane surface of daily cover, seams of temporary cover, membrane surface of temporary cover, seams of intermediate cover, membrane surface of intermediate cover were 138.34, 49.83, 13.56, 90.35, 14.48, 4.05, and 8.14 μg/(m²·s), respectively. Therefore, odor emission hotspots were at seams of daily and temporary cover areas. Converting the odor emissions at emission hotspots to the entire membrane cover surface, the average SOER of working face, daily cover area, temporary cover area and intermediate cover area were 138.34, 17.95, 22.43, and 6.24 μg/(m²·s), respectively. Combined with the size of each landfill area, the total odor emissions of the four above areas of a landfill zone were 830, 108, 1346, and 5175 mg/s, respectively, suggesting the necessity to control the odor emission of membrane cover stages especially for large-scale landfills. In terms of odor components, alcohols (38.7 %), sulfur compounds (22.9 %) and aldehydes (15.7 %) were major odorous groups.

Emission behavior and impact assessment of gaseous volatile compounds in two typical rural domestic waste landfills

Landfill sites are sources of gaseous volatile compounds. The dumping area (LDA) and leachate storage pool (LSP) of two typical rural domestic waste landfill sites in north China (NLF) and southwest China (SLF) were investigated. We found that 45, 46, 61 and 68 volatile organic compounds (VOC) were present in the air of NLF-LDA, NLF-LSP, SLF-LDA, and SLF-LSP, respectively. And there were 27, 29, 35 and 37 kinds of odorous compounds being detected. Oxygenated compounds (>48.88%), chlorinated compounds (>6.85%), and aromatics (>5.46%), such as organic acid, 1-chlorobutane, and benzene, were the most abundant compounds in both landfills. The SLF-LDA had the highest olfactory effect, with a corresponding total odor activity value of 29,635.39. The ozone-formation potential analysis showed that VOCs emitted from SLF landfills had significantly higher potential for ozone formation than those from NLF landfills, with ozone generation potentials of 166.02, 225.86, 2511.82, and 1615.99 mg/m³ for the NLF-LDA, NLF-LSP, SLF-LDA, and SLF-LSP, respectively. Higher chronic toxicity and cancer risk of VOCs were found in the SLF according to method of Risk Assessment Information System. Based on the sensitivity analysis by the Monte Carlo method, concentrations of benzene, propylene oxide, propylene, trichloroethylene, and N-nitrosodiethylamine, along with exposure duration, daily exposure time, and annual exposure frequency, significantly impacted the risk levels. We provide a scientific basis, which reflects the need for controlling and reducing gaseous pollutants from landfills, particularly rural residential landfills, which may improve rural sanitation.

Health risk assessment of volatile organic compounds (VOCs) emitted from landfill working surface via dispersion simulation enhanced by probability analysis

The assessment of the health risks of volatile organic compounds (VOCs) emitted from landfills via dispersion model is crucial but also challenging because of remarkable variations in their emissions and meteorological conditions. This study used a probabilistic approach for the assessment of the health risks of typical VOCs by combining artificial neural network models for emission rates and a numerical dispersion model enhanced by probability analysis. A total of 8753 rounds of simulation were performed with distributions of waste compositions and the valid hourly meteorological conditions for 1 year. The concentration distributions and ranges of the typical health-risky VOCs after dispersion were analyzed with 95% probability. The individual and cumulative non-carcinogenic risks of the typical VOCs were acceptable with all values less than 1 in the whole study domain. For individual carcinogenic risks, only ethylbenzene, benzene, chloroform, and 1, 2-dichloroethane at extreme concentrations showed minor or moderate risks with a probability of 0.1%-1% and an impact distance of 650-3000 m at specific directions. The cumulative carcinogenic risks were also acceptable at 95% probability in the whole study domain, but exceeded 1 × 10^-6 or even 1 × 10^-4 at some extreme conditions, especially within the landfill area. The vertical patterns of the health risks with height initially increased, and then decreased rapidly, and the peak values were observed around the height of the emission source. The dispersion simulation and health risk assessment of the typical health-risky VOCs enhanced by Monte Carlo can accurately reflect their probabilistic dispersion patterns and health risks to surrounding residents from both spatial and temporal dimensions. With this approach, this study can provide important scientific basis and technical support for the health risk assessment and management of landfills.

Enhancement of H2S sensing performance of rGO decorated CuO thin films: experimental and DFT studies

We demonstrate a highly selective and sensitive Cupric oxide (CuO) thin film-based low concentration Hydrogen sulfide (H₂S) sensor. The sensitivity was improved around three times by decorating with reduced graphene oxide (rGO) nanosheets. CuO thin films were deposited by Chemical Vapor Deposition followed by inter-digital electrode fabrication by a thermal evaporations system. The crystal structure of CuO was confirmed by x-ray diffraction. The sensing response of pristine CuO was found around 54% at 100 °C to 100 ppm of H₂S. In contrast, the sensing response was enhanced to 167% by decorating with rGO of 1.5 mg ml^-1concentration solution. The sensing was improved due to the formation of heterojunctions between the rGO and CuO. The developed sensor was examined under various gas environments and found to be highly selective towards H₂S gas. The improvement in sensing response has been attributed to increased hole concentration in CuO in the presence of rGO due to the Fermi level alignment and increased absorption of H₂S molecules at the rGO/CuO heterojunction. Further, electronic structure calculations show the physisorption behavior of H₂S molecules on the different adsorption sites. Detailed insight into the gas sensing mechanism is discussed based on experimental results and electronic structure calculations.

Adsorption of acetone, ethyl acetate and toluene by beta zeolite/diatomite composites: preparation, characterization and adsorbability

The hierarchical porous composites (Beta/Dt) were prepared by secondary growth method using natural diatomite and beta zeolite. Moreover, XRD, SEM, and BET characterize the composite's composition, surface structure, and pore structure. The adsorbability of Beta/Dt was evaluated by adsorption of three common volatile organic compounds (VOCs) of the printing industry: acetone, ethyl acetate, and toluene. The results show that under the optimum preparation condition, the adsorption capacities of the three VOCs on Beta/Dt were about 3.5 times those of pure beta zeolite and 4.7-35.3 times those of diatomite, respectively. It indicates the synergistic adsorption effect between beta zeolite and diatomite. The superior adsorption capacity of Beta/Dt can be attributed to the suitable micropore size, the increase of the diffusion channels, and the chemical adsorption on modification diatomite. The adsorption of acetone, ethyl acetate, and toluene on Beta/Dt conformed to the pseudo-second-order kinetic model. In contrast, adsorption isotherms conformed to the Langmuir model, meaning that both physical and chemical adsorption occurred simultaneously during the adsorption process, and the adsorption belonged to the monolayer adsorption. The chemical adsorption mechanism can be ascribed to the nucleophilic reaction between the three VOCs (acetone, ethyl acetate, and toluene) and Beta/Dt with positive charges resulting from the modification diatomite. Furthermore, the composite could still keep more than 90% of the adsorption capacity of the original adsorbent after five regeneration cycles.

Spatiotemporal footprints of odor compounds in megacity's food waste streams and policy implication

Odor pollution is one of the most critical issues in food waste (FW) recycling and has significant implications for human health. However, knowledge of their occurrence and spatiotemporally dynamic in urban FW streams is limited, making it not conducive to implement targeted odor management. This work followed the occurrence of 81 odor compounds (OCs) in nine FW-air environments along the Shanghai's FW streams for one year. Results showed that NH₃, acetic acid, acetaldehyde, acetone, 2-butanone, and methylene chloride were consistently the predominant OCs, despite the distinct differences in OCs profiles across seasons and treatment sites. Ridge regression and principal coordinate analysis demonstrated that seasons might play a non-negligible role in shaping odor profiles, and ambient temperature and humidity could account for the seasonal variation in OCs levels. Based on the modified fuzzy synthetic evaluation system, the screened priority pollutants in different FW-air environments were found broadly similar and the regulated air pollutants released via FW should be expanded to aldehyde and ketone compounds, especially for acetaldehyde. To our knowledge, this study is the first to track the spatiotemporal footprints of OCs within urban FW streams, and provides new insights into the control policy on FW-derived odor issues for megacities.

Emission Characteristics and Health Risks of Volatile Organic Compounds (VOCs) Measured in a Typical Recycled Rubber Plant in China

The continued development of the automotive industry has led to a rapid increase in the amount of waste rubber tires, the problem of “black pollution” has become more serious but is often ignored. In this study, the emission characteristics, health risks, and environmental effects of volatile organic compounds (VOCs) from a typical, recycled rubber plant were studied. A total of 15 samples were collected by summa canisters, and 100 VOC species were detected by the GC/MS-FID system. In this study, the total VOCs (TVOCs) concentration ranged from 1000 ± 99 to 19,700 ± 19,000 µg/m³, aromatics and alkanes were the predominant components, and m/p-xylene (14.63 ± 4.07%–48.87 ± 3.20%) could be possibly regarded as a VOCs emission marker. We also found that specific similarities and differences in VOCs emission characteristics in each process were affected by raw materials, production conditions, and process equipment. The assessment of health risks showed that devulcanizing and cooling had both non-carcinogenic and carcinogenic risks, yarding had carcinogenic risks, and open training and refining had potential carcinogenic risks. Moreover, m/p-xylene and benzene were the main non-carcinogenic species, while benzene, ethylbenzene, and carbon tetrachloride were the dominant risk compounds. In the evaluation results of L_OH, m/p-xylene (25.26–67.87%) was identified as the most key individual species and should be prioritized for control. In conclusion, the research results will provide the necessary reference to standardize the measurement method of the VOCs source component spectrum and build a localized source component spectrum.

Determination of Odor Air Quality Index (OAQII) Using Gas Sensor Matrix

This article presents a new way to determine odor nuisance based on the proposed odor air quality index (OAQII), using an instrumental method. This indicator relates the most important odor features, such as intensity, hedonic tone and odor concentration. The research was conducted at the compost screening yard of the municipal treatment plant in Central Poland, on which a self-constructed gas sensor array was placed. It consisted of five commercially available gas sensors: three metal oxide semiconductor (MOS) chemical sensors and two electrochemical ones. To calibrate and validate the matrix, odor concentrations were determined within the composting yard using the field olfactometry technique. Five mathematical models (e.g., multiple linear regression and principal component regression) were used as calibration methods. Two methods were used to extract signals from the matrix: maximum signal values from individual sensors and the logarithm of the ratio of the maximum signal to the sensor baseline. The developed models were used to determine the predicted odor concentrations. The selection of the optimal model was based on the compatibility with olfactometric measurements, taking the mean square error as a criterion and their accordance with the proposed OAQII. For the first method of extracting signals from the matrix, the best model was characterized by RMSE equal to 8.092 and consistency in indices at the level of 0.85. In the case of the logarithmic approach, these values were 4.220 and 0.98, respectively. The obtained results allow to conclude that gas sensor arrays can be successfully used for air quality monitoring; however, the key issues are data processing and the selection of an appropriate mathematical model.

Organic/Inorganic-Based Flexible Membrane for a Room-Temperature Electronic Gas Sensor

A room temperature (RT) H₂S gas sensor based on organic–inorganic nanocomposites has been developed by incorporating zinc oxide (ZnO) nanoparticles (NPs) into a conductivity-controlled organic polymer matrix. A homogeneous solution containing poly (vinyl alcohol) (PVA) and ionic liquid (IL) and further doped with ZnO NPs was used for the fabrication of a flexible membrane (approx. 200 μm in thickness). The sensor was assessed for its performance against hazardous gases at RT (23 °C). The obtained sensor exhibited good sensitivity, with a detection limit of 15 ppm, and a fast time response (24 ± 3 s) toward H₂S gas. The sensor also showed excellent repeatability, long-term stability and selectivity toward H₂S gas among other test gases. Furthermore, the sensor depicted a high flexibility, low cost, easy fabrication and low power consumption, thus holding great promise for flexible electronic gas sensors.

Advanced polymeric/inorganic nanohybrids: An integrated platform for gas sensing applications

Rapid industrial development, vehicles, domestic activities and mishandling of garbage are the main sources of pollutants, which are destroying the atmosphere. There is a need to continuously monitor these pollutants for the safety of the environment and human beings. Conventional instruments for monitoring of toxic gases are expensive, bigger in size and time-consuming. Hybrid materials containing organic and inorganic components are considered potential candidates for diverse applications, including gas sensing. Gas sensors convert the information regarding the analyte into signals. Various polymeric/inorganic nanohybrids have been used for the sensing of toxic gases. Composites of different polymeric materials like polyaniline (PANI), poly (4-styrene sulfonate) (PSS), poly (3,4-ethylene dioxythiophene) (PEDOT), etc. with various metal/metal oxide nanoparticles have been reported as sensing materials for gas sensors because of their unique redox features, conductivity and facile operation at room temperature. Polymeric nanohybrids showed better performance because of the larger surface area of nanohybrids and the synergistic effect between polymeric and inorganic materials. This review article focuses on the recent developments of emerging polymeric/inorganic nanohybrids for sensing various toxic gases including ammonia, hydrogen, nitrogen dioxide, carbon oxides and liquefied petroleum gas. Advantages, disadvantages, operating conditions and prospects of hybrid composites have also been discussed.

Development and application of high resolution mass spectrometry analytical method to study and identify the photoinduced transformation products of environmental pollutants

Terpenes are among the major causes of pleasant or unpleasant odors close to active or inactive landfills. We studied R-limonene and p-cymene environmental degradation products using the heterogeneous photocatalysis mediated by titanium dioxide to explore the odor pollution. The aim of the study was the development of mass spectrometry based methods both hyphenated with GC and HPLC to identify and characterize transformation products (TPs) derived from photodegradation of R-limonene and p-cymene. With the GC-MS method we identified three TPs for R-limonene and two for p-cymene comparing the obtained mass spectra with those in the NIST library. While with HPLC-MS method, thanks to the use of the high resolution of MS tool, we recognized four and five TPs for R-limonene and p-cymene respectively. No p-cymene was detected as R-limonene transformation product. The methods developed were then applied to real environmental samples coming from landfills active (Lan1) or inactive (Lan2 and Lan3) located in northern Italy. R-limonene was detected in the active landfill (Lan1 at the concentration of 2.35 μg/mL) together with one of its TPs and one TP derived from p-cymene. p-Cymene was detected in the other two inactive landfills (Lan2 and Lan3 concentrations 0.025 and 0.15 μg/mL, respectively) together with one of its TP and two TPs coming from R-limonene photodegradation. The finding of TPs together with R-limonene and p-cymene both in active and inactive landfills point out the attention on the reduction of these molecules in the environment to reduce pollution and human risks.

Ethylene dimethacrylate used as an NH3 adsorbent with high adsorption capacity and selectivity

NH₃ molecularly imprinted polymers (NH₃-MIPs) were synthesized that could successfully separate and recover NH₃ during sludge aerobic composting; however, increased toluene usage during the adsorbent preparation incurred a high cost and severe environmental risks. The purpose of this study was to reduce toluene usage by optimizing the reagent composition of NH₃-MIPs, based on maintaining a high NH₃ adsorption capacity and selectivity. Five adsorbent groups, including NH₃-MIPs, and NH₃-Ethylene dimethacrylate adsorbents (NH₃-EGDMA) with 0%, 75%, 90%, and 100% toluene reduction efficiencies, were prepared and tested for their adsorption performance. The results showed that NH₃-EGDMA with 75% toluene reduction not only had a high NH₃ adsorption capacity (104.42 mg g^-1) but also had a high separation factor for NH₃/methyl sulfide (3121) and NH₃/dimethyl disulfide (4597). The adsorption mechanism was identified as a chemical force between NH₃ and NH₃-EGDMA with a 75% toluene reduction using the analysis of the kinetic model. This study significantly reduces NH₃ adsorbent cost as well as harm to the environment during the adsorbent preparation, which was beneficial to the popularization and application of this NH₃ adsorbent.

Flexible Cu3(HHTP)2 MOF Membranes for Gas Sensing Application at Room Temperature

Mixed matrix membranes (MMMs), possessing high porosity, have received extensive attention for gas sensing applications. However, those with high flexibility and significant sensitivity are rare. In this work, we report on the fabrication of a novel membrane, using Cu₃(HHTP)₂ MOF (Cu-MOF) embedded in a polymer matrix. A solution comprising a homogenous suspension of poly-vinyl alcohol (PVA) and ionic liquid (IL), and Cu-MOF solid particles, was cast onto a petri dish to obtain a flexible membrane (215 μm in thickness). The sensor membrane (Cu-MOF/PVA/IL), characterized for its structure and morphology, was assessed for its performance in sensing against various test gases. A detection limit of 1 ppm at 23 °C (room temperature) for H₂S was achieved, with a response time of 12 s. Moreover, (Cu-MOF/PVA/IL) sensor exhibited excellent repeatability, long-term stability, and selectivity towards H₂S gas. The other characteristics of the (Cu-MOF/PVA/IL) sensor include high flexibility, low cost, low-power consumption, and easy fabrication technique, which nominate this sensor as a potential candidate for use in practical industrial applications.

Odor emissions: A public health concern for health risk perception

The olfactory nuisance, due to the emissions of active molecules, is mainly associated with unproperly managed waste disposal and animal farming. Volatile compounds e.g., aromatics, organic and inorganic sulfide compounds, as well as nitrogen and halogenated compounds are the major contributor to odor pollution generated by waste management plants; the most important source of atmospheric ammonia is produced by livestock farming. Although an odorous compound may represent a nuisance rather than a health risk, long-term exposure to a mixture of volatile compounds may represent a risk for different diseases, including asthma, atopic dermatitis, and neurologic damage. Workers and communities living close to odor-producing facilities result directly exposed to irritant air pollutants through inhalation and for this reason the cumulative health risk assessment is recommended. Health effects are related to the concentration and exposure duration to the odorants, as well as to their irritant potency and/or biotransformation in hazardous metabolites. The health effects of a single chemical are well known, while the interactions between molecules with different functional groups have still to be extensively studied. Odor emissions are often due to airborne pollutants at levels below the established toxicity thresholds. The relationship between odor and toxicity does not always occurs but depends on the specific kind of pollutant involved. Indeed, some toxic agents does not induce odor nuisance while untoxic agents do. Accordingly, the relationship between toxicity and odor nuisance should be always analyzed in detail evaluating on the characteristics of the airborne mixture and the type of the source involved.

Occupational health risk assessment of BTEX in municipal solid waste landfill based on external and internal exposure

Benzene, toluene, ethylbenzene, and xylenes (BTEX) released from landfills have received increased attention because of their health risks. In this study, individual external and internal exposures of BTEX in a municipal solid waste (MSW) landfill were simultaneously studied for the first time. Eight workers from the landfill (as the case group) and eight control subjects were enrolled in the study. In total, 88 air samples and 232 urine samples (194 samples from the case group and 38 samples from the control group) were obtained from 2018 to 2019. According to the results of external exposure monitoring, benzene was the predominant component of BTEX, and the exposure level was higher in winter than in other seasons. Carcinogenic (Risk_T) and noncarcinogenic (HI_T) risks were calculated based on a dose-response model. The Risk_T (1.64 × 10^-8-1.09 × 10^-6) might exceeded the limit, whereas HI_T (9.84 × 10^-4-1.40 × 10^-2) was within their thresholds. Benzene was the major contributor to both Risk_T and HI_T. Internal exposures were evaluated by measuring urinary metabolites of BTEX. Levels of urinary BTEX metabolites for case group were higher than those for control group. A remarkable increase in urinary metabolites was observed from the urine samples of the case group after their shift compared with those before their shift. t,t-MA, the metabolite of benzene, was found to exceed the biomonitoring guidance limits of both China and the United States of America. Landfills can be considered as a potential BTEX exposure source for landfill employees. Minimizing occupational exposures and appropriate personal protective equipment are needed in reducing BTEX exposures.

Electronic Noses and Their Applications for Sensory and Analytical Measurements in the Waste Management Plants-A Review

Waste management plants are one of the most important sources of odorants that may cause odor nuisance. The monitoring of processes involved in the waste treatment and disposal as well as the assessment of odor impact in the vicinity of this type of facilities require two different but complementary approaches: analytical and sensory. The purpose of this work is to present these two approaches. Among sensory techniques dynamic and field olfactometry are considered, whereas analytical methodologies are represented by gas chromatography–mass spectrometry (GC-MS), single gas sensors and electronic noses (EN). The latter are the core of this paper and are discussed in details. Since the design of multi-sensor arrays and the development of machine learning algorithms are the most challenging parts of the EN construction a special attention is given to the recent advancements in the sensitive layers development and current challenges in data processing. The review takes also into account relatively new EN systems based on mass spectrometry and flash gas chromatography technologies. Numerous examples of applications of the EN devices to the sensory and analytical measurements in the waste management plants are given in order to summarize efforts of scientists on development of these instruments for constant monitoring of chosen waste treatment processes (composting, anaerobic digestion, biofiltration) and assessment of odor nuisance associated with these facilities.

Artificial neural network (ANN) modeling for the prediction of odor emission rates from landfill working surface

Landfills release significant odorous compounds from the working surface, and their emission rates are crucial for odor and health risk assessment. A total of 99 valid datasets of odor emissions from a landfill working surface were obtained from in situ monitoring for 9 months. Meteorological parameters (temperature, humidity, atmospheric pressure) and waste properties (contents of protein, lipid, carbohydrate, ash, and moisture) were used to construct artificial neural network (ANN) models for the emission rate prediction of typical compounds. The optimal structures and performance of the ANN models were determined by comparing and training with different structural configurations. The ANN models with genetic algorithm (GA) optimization show better performance than those without GA. With the data distribution of input parameters, the ranges of the emission rates of typical compounds were predicted by combining the established ANN models and the Monte Carlo approach. The sensitivity and uncertainty analyses revealed that temperature, atmospheric pressure, protein and lipid contents are parameters sensitive to emission rates, and meteorological parameters have significant impacts on the uncertainty. The established ANN models for the prediction of emission rates can provide scientific evidence and an approach to assess and control the odor and health risk in waste sectors.

Quantification and control of gaseous emissions from solid waste landfill surfaces

Landfilling is the most common option for solid waste disposal worldwide. Landfill sites can emit significant quantities of greenhouse gases (GHGs; e.g., methane, carbon dioxide, and nitrous oxide) and release toxic and odorous compounds (e.g., sulfides). Due to the complex composition and characteristics of landfill surface gas emissions, the quantification and control of landfill emissions are challenging. This review attempts to comprehensively understand landfill emission quantification and control options by primarily focusing on GHGs and odor compounds. Landfill emission quantification was highlighted by combining different emissions monitoring approaches to improve the quality of landfill emission data. Also, landfill emission control requires a specific approach that targets emission compounds or a systematic approach that reduces overall emissions by combining different control methods since the diverse factors dominate the emissions of various compounds and their transformation. This integrated knowledge of emission quantification and control options for GHGs and odor compounds is beneficial for establishing field monitoring campaigns and incorporating mitigation strategies to quantify and control multiple landfill emissions.

Diffusion simulation, health risks, ozone and secondary organic aerosol formation potential of gaseous pollutants from rural comprehensive waste treatment plant

Comprehensive waste treatment plants (CWTPs) are significant sources of gaseous pollutants such as odors, volatile organic compounds (VOCs) and nitrogen oxides (NOx), polluting the environment and endangering human health. This study conducted on-site investigations on gaseous pollutants emissions from different areas of a CWTP. A total of 10 pollutants were identified of which ammonia (11.32 mg/m³ in average) was the main odorous substance, and benzene (19.51 mg/m³ in average) and toluene (42.07 mg/m³ in average) were the main VOCs. The feeding workshop (FW) was considered the main source of gaseous pollutants. The Gaussian plume model demonstrated that the pollution became more serious after spreading in the southeast downwind direction. Occupational exposure risks of on-site workers were mainly attributed to hydrogen sulfide, ammonia, benzene, and toluene, as their hazard index (HI) and lifetime cancer risk (CR) exceeded the recommended occupational safety limits. The gaseous pollutants diffused from CWTP may still pose a potential health risk to residents within a range of up to 7.5 km. The emulation and quantification of ozone formation potential by methods of Propyl-Equiv and MIR demonstrated that the contribution rate of toluene presented in each stage of CWTP exceed 80 %. Toluene was also the largest contributor to secondary organic aerosol with the contribution rate reached 56.34-85.14 %, followed by benzene (14.72-38.52 %). This research provides a basis for the reduction and control of gaseous pollutants in the treatment and disposal of rural domestic waste.

Health risks of odorous compounds during the whole process of municipal solid waste collection and treatment in China

The high moisture content and perishable organic waste of municipal solid waste (MSW) in China have caused the severe odor nuisance to be one of the crucial reasons for resident complaints. Understanding the environmental risks of odorous compounds lays the foundations for resolving the problems. This study collected concentration data of 86 odorous compounds in five types of MSW processing facilities/equipment which can well represent the whole process of MSW stream, including waste bins and transfer stations for collection, compost plants and anaerobic digestion plants for utilization, and landfills for final disposal. The results revealed that the occupational health risks of odorants were not fully consistent with the compound concentrations and olfactory annoyance. Higher odorous compound concentrations and more severe olfactory annoyance can be found in the MSW utilization and disposal facilities, but the occupational carcinogenic risk (2.79 × 10^-5-1.12 × 10^-3) was non-negligible along the whole MSW stream. Aromatic hydrocarbons and halogenated hydrocarbons were crucial contributors to the carcinogenic risk of odorous compounds emission from these facilities. Particularly for estimating the adverse impact range of MSW facilities, the carcinogenic risk was the most critical factor, implying impact distance of ∼1.5 km for MSW transfer station and ∼5 km for landfill, and even higher for the regions (such as southwest China) with lower wind speed and higher atmospheric stability. In addition to current regulations, another 5 compounds (acetaldehyde, 1,3,5-trimethylbenzene, 1,2-dichloroethane, acrolein, and benzyl chloride) that displayed high carcinogenic risks were suggested to be concerned. This study provided insights for the policymakers regarding MSW odors management, especially underscoring the importance of considering the health risks of odorous compounds.

Effects of FeSO4 dosage on nitrogen loss and humification during the composting of cow dung and corn straw

The effects of FeSO₄ on nitrogen loss and humification were investigated in the composting of cow dung and corn straw. The results showed that all groups met the ripening requirements after 50 days: the temperature was above 50 °C for 12- 17 days; the products had pH values of 6.4-7.6, electrical conductivities of 1.06-1.33 ms·cm^-1, NH₄⁺-N contents of 37.2-61.8 mg kg^-1, and the seed germination index of 95%-101%. FeSO₄ reduced nitrogen losses by 9.21-15.65% compared to the control group. FeSO₄ also improved the compost humification process: the humus substances (HS) contents in the compost product with FeSO₄ were 109.82-129.86 g·kg^-1, higher than 106.31 g·kg^-1 in the control group. The compost product in 3.75% FeSO₄ treatment had the highest maturity degree. This study showed that FeSO₄ could inhibit the mineralization of organic matter during the composting and accelerate the formation of HS.

Occurrence and risk assessment of volatile organic compounds in multiple drinking water sources in the Yangtze River Delta region, China

Volatile organic compounds (VOCs) are widely present in water environment, which can threaten ecological sustainability and human health. The concentrations of VOCs and their ecological risks in drinking water are of great concern to human beings. Therefore, 54 kinds of VOCs were investigated from 58 locations of the Yangtze River Delta Region (Yangtze River, Qiantang River, Huangpu River, Taihu Lake and Jiaxing Urban River). Out of 54 target compounds, only 31 VOCs were detected, with total concentrations ranging from 0.570 to 46.820 μg/L from 58 locations of all drinking water sources. Among all detected VOCs compounds, only toluene and styrene can cause high-level ecological risk at location TH-2 of Taihu Lake. According to the carcinogenic and non-carcinogenic risk index, compounds such as 1,2-dichloroethane, bromodichloromethane and 1,1,2-trichloroethane posed a higher carcinogenic risk, and 1,2-dichloroethane, trichloroethylene and toluene posed a higher non-carcinogenic risk. Olfactory risks of water bodies in the Yangtze River Delta region are negligible. Although the concentrations of VOCs in the Yangtze River Delta region did not exceed national standards in China and guidelines of the World Health Organization (WHO) for drinking water, the presence of some ecological and health risks indicated that future monitoring studies and control practices are important to ensure ecological safety of drinking water sources.

Simultaneous annihilation of microorganisms and volatile organic compounds from municipal solid waste storage rooms with slightly acidic electrolyzed water

Great deal pathogenic bacteria and malodorous gases are hidden in municipal solid waste (MSW), which poses excellent environmental sanitation risks for sanitation workers and residents, and preventive measures should be implemented. In this study, the simultaneous annihilation of microorganisms and volatile organic compounds (VOCs) with slightly acidic electrolyzed water (SAEW) was investigated in an MSW storage room of a residential community in Shanghai, China. The microbial population of airborne, surfaces and handles of waste bins, hands of sanitation workers and the main components of VOCs were measured. The results indicated that the bacterial reduction efficiencies of SAEW with an available chlorine concentration (ACC) of 50-100 mg/L on surfaces and handles of waste bins and sanitation workers' hands were 22.7%-84.1%. Also, SAEW effectively reduced the average population of airborne bacteria and fungi by 358 and 378 colony-forming units (CFU)/m³ and decreased the detection rates of coliforms by 14.2%-51.9%. The concentrations of most VOCs were reduced by 21.4%-88.3% after spraying SAEW. And the accumulated values of carcinogenic and noncarcinogenic risks also tended to decrease with spraying SAEW. These findings imply that SAEW has significant application potential to control environmental sanitation risks in MSW storage rooms.

Evaluation of Occupational Exposure Risk for Employees Working in Dynamic Olfactometry: Focus On Non-Carcinogenic Effects Correlated with Exposure to Landfill Emissions

This work aims to evaluate the non-carcinogenic health effects related to landfill odor emissions, therefore focusing on workers involved in dynamic olfactometry. Currently, the most common technique to quantify odor emissions is dynamic olfactometry, a sensorial analysis involving human assessors. During the analysis, assessors are directly exposed, at increasing concentrations, to odor samples, and thus to the hazardous pollutants contained therein. This entails the need to estimate the associated exposure risk to guarantee examiners’ safety. Therefore, this paper evaluates the exposure risk for olfactometric examiners to establish the minimum dilution level to be adopted during the analysis of landfills’ odorous samples to guarantee panelists’ safety. For this purpose, an extensive literature review regarding the pollutants emitted by landfill odor sources was conducted, comparing compounds’ chemical concentrations and threshold limit values (TLVs) to calculate the Hazard Index (HI) and thus establish a minimum dilution value. The data collected indicate that a non-negligible non-carcinogenic risk exists for all landfill emissions considered. However, from the data considered, the minimum dilution factor to be adopted is lower than the typical odor concentration observed for these sources. Therefore, the olfactometric analysis of landfill samples can be generally conducted in safe conditions.

Identification of origins and influencing factors of environmental odor episodes using trajectory and proximity analyses

It is challenging for the governmental agencies to provide an instant response and to systematically analyze the huge number of odor complaints which are received frequently by them. This study aimed to establish a data analysis framework featuring trajectory and proximity analyses to confirm odor origins, assess impact areas, and identify determinants and mechanisms of odor episodes based on odor reports. The investigation used 273 odor complaints reported in northern Collierville, Tennessee, between January 1st, 2019 and December 15th, 2020. The location of each complaint was geocoded in Google Map, and the backward wind trajectories were calculated using the web-based Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The nearby Eplex Landfill and Collierville Northwest Sewage Treatment Plant were targeted for the analyses. Odor impacts were evaluated with temporal and spatial characteristics of reported odor episodes. Logistic models were performed to identify weather parameters that significantly influenced odor occurrence. The field inspections indicated two periods targeting different sources. Period 1: from January 1st, 2019 to October 31st, 2020, the landfill appeared as the major source; Period 2: from November 1st, 2020 to December 15th, 2020, the sewage plant emerged as the major source. In Period 1, 65% of the complaints had wind transporting from the landfill, and 88% occurred at residences within 500 m of the landfill. In Period 2, 33% of the complaints had wind that blew from the sewage plant and 85% occurred at residences within 1000 m from the sewage plant. The likelihood of an odor episode day was significantly associated with wind speed [Odds Ratio (OR) = 0.66, 95% Confidence Interval (CI): 0.56-0.77], temperature (OR = 0.97, 95% CI: 0.95-0.98), and rainfall (OR = 1.02, 95% CI: 1.00-1.04). The odor issue in Collierville reflected poor zoning between the odor sources and residential areas. Separation distances of 500 m and 1000 m from the landfill and sewage facilities, respectively, are suggested to prevent odor issues. The proposed data analysis framework can be adopted by governmental agencies for fast responses to odor complaints, odor assessment, and environmental odor management.

High-quality syngas production: The green and efficient utilization of waste tire and waste heat from the steelmaking converter process

This study proposes a new technology in which waste tire powders are injected into a converter vaporization cooling flue for gas recovery via pyrolysis using high-temperature waste heat. The higher temperature pyrolysis behavior of waste tire powder under different heating rates was investigated using a TG-MS technique. A drop tube furnace was used to simulate the converter vaporization cooling flue to investigate the effect of high temperatures on waste tire powder pyrolysis. The results indicated that secondary pyrolysis occurred above 900 °C with low weight and weight loss rates, which were considerably lower than those observed in the thermal degradation stage. The main gaseous products formed were CO, CO₂, H₂, CH₄, and H₂O. The drop tube furnace experimental results indicated that high temperatures can facilitate the degradation of waste tire powder to generate more H₂ and CO and improve the low heating values. At 1200 °C, the H₂ and CO contents were approximately 19.60% and 4.90%, respectively. The low heating value was 29.64 MJ/Nm³. The char yield was in the range of 32.67%-37.33%; the fixed carbon content increased from 79.63% to 84.75%. The results provide preliminary verification of the feasibility of injecting waste tire powders into a converter vaporization cooling flue for gas recovery.

A Highly Sensitive and Flexible Metal-Organic Framework Polymer-Based H2S Gas Sensor

We report the fabrication of a novel metal-organic framework (MOF)-polymer mixed-matrix flexible membrane for the detection of hydrogen sulfide (H₂S) gas at room temperature. This high-performance gas sensor is based on MOF-5 microparticles embedded on a conductivity-controlled chitosan (CS) organic membrane. The conductivity of the organic membrane is controlled by blending it with a glycerol ionic liquid (IL) at different concentrations. The sensor showed a remarkable detection sensitivity for H₂S gas at a concentrations level as low as 1 ppm at room temperature. The MOF-5/CS/IL gas sensor demonstrates a highly desirable detection selectivity, fast response time (<8 s), recovery time of less than 30 s, and outstanding sensing stability averaging at 97% detection with 50 ppm of H₂S gas. This composite having high sensitivity, low-power consumption, and flexibility holds great promise for addressing current challenges pertinent to environmental sustainability.