Assessment of PCB contamination, the potential for in situ microbial dechlorination and natural attenuation in an urban watershed at the East Coast of the United States

Variation in natural attenuation rates of polychlorinated biphenyls (PCBs) in fish from streams and reservoirs in East Tennessee observed over a 35-year period

Environmental contamination due to human activities is a major concern, particularly for persistent chemicals. Within catchments, persistent chemicals linked to negative health outcomes such as polychlorinated biphenyls (PCBs) have great potential to be transported, through adsorption or biological uptake, with downstream locations acting as sinks for accumulation. Here we present long-term trends in PCB bioaccumulation in fish found in lower-order tributaries on the Oak Ridge Reservation, an impacted US Department of Energy property in East Tennessee, USA, and a large reservoir system adjacent to it composed of parts of the Clinch and Tennessee Rivers. Given that the reservoir system has experienced no direct PCB mitigation activities, this record offers an opportunity to explore potential natural attenuation of PCBs within a large lotic ecosystem. Attenuation rates ranged from 0% to 8% yr^-1 in minnows and sunfish at stream sites and 5.4-11.3% yr^-1 in catfish at reservoir sites. These rates are comparable to findings from similar studies in other regions, suggesting a consistency in responses since the banning of PCB production in 1979. Further, results suggest that PCB sources from discharge outfalls are important locally but are not primarily responsible for sustaining PCB contamination in downstream reservoirs.

Recent advances in PCB removal from historically contaminated environmental matrices

Despite being drastically restricted in the 1970s, polychlorinated biphenyls (PCBs) still belong among the most hazardous contaminants. The chemical stability and dielectric properties of PCBs made them suitable for a number of applications, which then lead to their ubiquitous presence in the environment. PCBs are highly bioaccumulative and persistent, and their teratogenic, carcinogenic, and endocrine-disrupting features have been widely reported in the literature. This review discusses recent advances in different techniques and approaches to remediate historically contaminated matrices, which are one of the most problematic in regard to decontamination feasibility and efficiency. The current knowledge published in the literature shows that PCBs are not sufficiently removed from the environment by natural processes, and thus, the suitability of some approaches (e.g., natural attenuation) is limited. Physicochemical processes are still the most effective; however, their extensive use is constrained by their high cost and often their destructiveness toward the matrices. Despite their limited reliability, biological methods and their application in combinations with other techniques could be promising. The literature reviewed in this paper documents that a combination of techniques differing in their principles should be a future research direction. Other aspects discussed in this work include the incompleteness of some studies. More attention should be given to the evaluation of toxicity during these processes, particularly in terms of monitoring different modes of toxic action. In addition, decomposition mechanisms and products need to be sufficiently clarified before combined, tailor-made approaches can be employed.

Augmentation of an Engineered Bacterial Strain Potentially Improves the Cleanup of PCB Water Pollution

Polychlorinated biphenyls (PCBs) are recalcitrant organohalide pollutants, consisting of 209 congeners. PCB cleanup in natural landscapes is expected to be achieved by the metabolic activity of microorganisms, but aerobic PCB-degrading bacteria that inhabit sites polluted by PCBs cannot degrade all PCB congeners due to the specificity of their enzymes. In this study, we investigated the degradability of PCBs when a genetically modified PCB-degrading bacterium was compounded with wild-type PCB-degrading bacteria. We used two bacterial strains, Comamonas testosteroni YAZ2 isolated from a PCB-uncontaminated natural landscape and Escherichia coli BL21(DE3) transformed with a biphenyl dioxygenase (BphA) gene from a well-known PCB degrader, Burkholderia xenovorans LB400. The enzymatic specificities of BphA were 2,3-dioxygenation in the YAZ2 and 2,3- and 3,4-dioxygenations in the recombinant E. coli. For the PCB-degrading experiment, a dedicated bioreactor capable of generating oxygen microbubbles was prototyped and used. The combined cells of the recombinant and the wild-type strains with an appropriate composite ratio degraded 40 mg/L of Kaneclor KC-300 to 0.3 ± 0.1 mg/L within 24 h. All of the health-toxic coplanar PCB congeners in KC-300 were degraded. This study suggested that the augmentation of an engineered bacterial strain could improve the cleanup of PCB water pollution. It also revealed the importance of the ratio of the strains with different PCB-degrading profiles to efficient degradation and that the application of oxygen microbubbles could rapidly accelerate the cleanup. IMPORTANCE PCB cleanup technique in a natural environment relies on the use of enzymes from microorganisms, primarily biphenyl dioxygenase and dehalogenase. Herein, we focused on biphenyl dioxygenase and created a recombinant PCB-degrading E. coli strain. Despite the development of environments for the field use of transgenic microbial strains around the world, verification of the applicability of transgenic microbial strains for PCB cleanup in the field has not yet been reported. We tentatively verified the extent to which degradability could be obtained by an augmentation model of a transgenic strain, the enzyme expression of which is easily regulated in rivers and lakes with PCB pollution. Our experiments used a dedicated bioreactor to model the natural landscape and produced results superior to those of bioremediation or biostimulation methods. The application of micro-nano bubbles, which has recently been discussed, to the cleanup of environmental pollution was also found to be useful in this study.

Effects of iron-carbon materials on microbial-catalyzed reductive dechlorination of polychlorinated biphenyls in Taihu Lake sediment microcosms: Enhanced chlorine removal, detoxification and shifts of microbial community

Nano zero-valent iron particles (nZVI, 0.09 wt%), micro zero-valent iron particles (mZVI, 0.09 wt%), granular activated carbon (GAC, 3.03 wt%), GAC supported nZVI (nZVI/GAC, 3.12 wt%) and nZVI&GAC (nZVI 0.09 wt%, GAC 3.03 wt%) were evaluated for their effects on polychlorinated biphenyls (PCBs) anaerobic reductive dechlorination, detoxification, as well as microbial community structure in Taihu Lake (China) sediment microcosms. The results showed that all of these five materials could stimulate PCBs reductive dechlorination, especially for dioxin-like PCB congeners, and nZVI&GAC had the best removal effect on PCBs. The reduction of total PCBs increased from 13.5% to 33.2%. H₂ generated by zero-valent iron corrosion was utilized by organohalide-respiring bacteria (OHRB) to enhance the dechlorination of PCBs predominantly via meta chlorine removal in the short term. The addition of ZVI had little impact on the total bacterial abundance and the microbial community structure. The adsorption of GAC and potential bioremediation properties of attached biofilm could promote the long-term removal of PCBs. GAC, nZVI/GAC, nZVI&GAC had different influences on the microbial structure. These findings provide insights into the biostimulation technique for in situ remediations of PCBs contaminated sediments.

Spatial Distribution, Bioconversion and Ecological Risk of PCBs and PBDEs in the Surface Sediment of Contaminated Urban Rivers: A Nationwide Study in China

Surface sediments of polluted urban rivers can be a reservoir of hydrophobic persistent organic pollutants (POPs). In this study, we comprehensively assessed the contamination of two groups of POPs, that is, polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs), in 173 black-odorous urban rivers in China. Spatial distribution of PCBs and PBDEs showed similar patterns but very different contamination levels in surface sediments, that is, average concentrations of 10.73 and 401.16 ng/g dw for the ∑PCBs and ∑PBDEs, respectively. Tetra-/di-CBs and deca-BDE are major PCBs and PBDEs and accounted for 59.11 and 95.11 wt % of the ∑PCBs and ∑PBDEs, respectively. Compared with the persistence of PBDEs, the EF changes of chiral PCBs together with previous cultivation evidence indicated indigenous bioconversion of PCBs in black-odorous urban rivers, particularly the involvement of uncharacterized Dehalococcoidia in PCB dechlorination. Major PCB sources (and their relative contributions) included pigment/painting (25.36%), e-waste (22.92%), metallurgical industry (13.25%), and e-waste/biological degradation process (10.95%). A risk assessment indicated that exposure of resident organisms in urban river sediments to deca-/penta-BDEs could pose a high ecological risk. This study provides the first insight into the contamination, conversion and ecological risk of PCBs and PBDEs in nationwide polluted urban rivers in China.

Anaerobic condition induces a viable but nonculturable state of the PCB-degrading Bacteria Rhodococcus biphenylivorans TG9

Significant microbial removal of highly chlorinated polychlorinated biphenyls (PCBs) requires the cooperation of anaerobic and aerobic bacteria. During the sequencing process of anaerobic dechlorination and aerobic degradation of PCBs, aerobic degrading bacteria have to undergo anaerobic stress. However, the survival strategy of aerobic degrading bacteria under anaerobic condition is not well-understood. In this study, the culturable cells of Rhodococcus biphenylivorans TG9 decreased from 10⁸ CFU/mL to values below the detection limit after 60 days of anaerobic stress while the viable cells remained 10⁵-10⁶ cells/mL, indicating that anaerobic condition induced TG9 entering into the viable but nonculturable (VBNC) state. Cell resuscitation was observed when oxygen was supplied further confirming the VBNC state of TG9. The results of single-cell Raman spectroscopy combined with heavy water indicated the significant decrease of metabolic activity after TG9 entering into the VBNC state. Additionally, the degradation ability of TG9 in the VBNC state was also significantly reduced, while it recovered after resuscitation. Our research proved that entering into the VBNC state is a survival strategy of TG9 under anaerobic conditions, and the limited culturability and degrading capacity could be overcome by resuscitation. The present study provides new insights for improving the remediation efficiency of PCBs contamination.

Characterization of mono- to deca-chlorinated biphenyls in a well-preserved sediment core from Beppu Bay, Southwestern Japan: Historical profiles, emission sources, and inventory

Contamination levels and profiles of mono- to deca-chlorinated biphenyls (PCBs) were characterized in a sediment core dated in 1954-2011 from Beppu Bay, southwestern Japan, providing a comprehensive and detailed picture on the environmental occurrence, temporal trends, and emission sources of these pollutants in the study area. Concentrations of total PCBs in the core ranged from 3.5 to 150 (median 15) ng g^-1 dry weight and exhibited depth profile matching with Japanese PCB production and emission patterns (i.e., drastically increasing from the early 1960s, peaking in 1970, and then rapidly decreasing). Origin of PCBs in the studied samples largely associated with Kanechlor mixtures (e.g., KC-300 and KC-400), especially for sediment layers dated between the mid-1960s and early 1970s (i.e., the intensive PCB production period in Japan). In addition, dechlorination and weathering signals and emerging inputs of PCBs were also observed in deeper and shallower sediment segments with notable proportions of some unique congeners such as CB-47/48/51 and CB-11, respectively. Historical fluxes of PCBs in our samples showed quite similar vertical shape as concentrations. In the context of national implementation for complete treatment of PCB-containing waste until 2024, further investigations on spatiotemporal trends and environmental loads of PCBs in Japan are necessary.

Contaminated aquatic sediments

The remediation of contaminated aquatic sediments requires a range of expertise from assessment (investigation, risk evaluations, modeling, and remedy selection) to design and construction. Research in 2019 has added to knowledge on optimizing the use of passive samplers for assessing chemical concentrations in sediment porewater. The porewater and black carbon appear to be better predictors of contaminant bioaccumulation than total organic carbon alone. This has led to better characterization of potential risk at sediment sites. Tools to identify and model sources of chemicals have been developed and used particularly for some metals, polynuclear aromatic hydrocarbons and polychlorinated biphenyls. There is great emphasis on beneficially using dredged sediment, treating it as a resource rather than a waste. Amendments used in sediment caps continue to be refined including the use of activated carbon within the caps and by itself. A technique involving 16S rRNA has been established as a means of identifying microbiological composition that naturally degrade contaminants. © 2020 Water Environment Federation PRACTITIONER POINTS: Sediment capping technology continues to advance Sampling and testing methods continue to be refined Natural processes such as biodegradation are being better understood Beneficial use of dredged sediment continue to be emphasized.

Evaluation of bioremediation strategies for treating recalcitrant halo-organic pollutants in soil environments

The aim of this study was to investigate the bioremediation potential of polychlorinated biphenyls (PCBs) in soil, mimicking three strategies: (a) mycoaugmentation: by the addition of Trametes sanguinea and Pleurotus sajor-caju co-cultures immobilized on sugarcane bagasse; (b) biostimulation: by supplementation of sugarcane bagasse; and (c) natural attenuation: no amendments. The experiments were done in microcosms using Ultisol soil. Remediation effectiveness was assessed based on pollutants content, soil characteristics, and ecotoxicological tests. Biostimulation and mycoaugmentation demonstrated the highest PCBs-removal (approx. 90%) with a significant toxicity reduction at 90 d. The studied strains were able to survive during the incubation period in non-sterilized soil. Laccase, manganese-peroxidase and endoxylanase activities increased significantly in co-cultures after 60 d. Sugarcane bagasse demonstrated to be not only a suitable support for fungal immobilization but also an efficient substrate for fungal colonization of PCBs-contaminated soils. Mycoaugmentation and biostimulation with sugarcane bagasse improved oxidable organic matter and phosphorous contents as well as dehydrogenase activity in soil. Therefore, biostimulation with sugarcane bagasse and mycoaugmentation applying dual white-rot fungal cultures constitute two efficient bioremediation alternatives to restore PCBs-contaminated soils.

Adolescent exposure to environmental level of PCBs (Aroclor 1254) induces non-alcoholic fatty liver disease in male mice

Polychlorinated biphenyls (PCBs) are persistent organic pollutants found in various environmental media, and there is growing evidence that PCBs may contribute to the pathogenesis of non-alcoholic fatty liver disease (NAFLD). The purposes of this study were to investigate whether environmental level of Aroclor 1254 (a commercial mixture of PCBs) exposure to adolescent male mice could induce the development of NAFLD and the mechanisms involved. Twenty-one-day-old male C57BL/6 mice were exposed to Aroclor 1254 (0.5-500 μg/kg body weight) by oral gavage once every third day for 60 days. The results showed that exposure to Aroclor 1254 increased body weight and decreased the liver-somatic index in a dose-dependent manner. Aroclor 1254 administration increased lipid accumulation in the liver and induced the mRNA expression of genes associated with lipogenesis, including acetyl-CoA carboxylase 1 (Acc1), acetyl-CoA carboxylase 2 (Acc2) and fatty acid synthase (Fasn). Moreover, Aroclor 1254 decreased peroxisome proliferator-activated receptor alpha (PPARα) signaling and lipid oxidation. In addition, we found that Aroclor 1254 administration induced oxidative stress in mouse liver and elevated the protein level of cyclooxygenase 2 (COX-2), an inflammatory molecule, possibly via the endoplasmic reticulum (ER) stress inositol-requiring enzyme 1α-X-box-binding protein-1 (IRE1α-XBP1) pathway, but not the nuclear factor-κB (NF-κB) pathway. In summary, adolescent exposure to environmental level of PCBs stimulated oxidative stress, ER stress and the inflammatory response and caused NAFLD in male mice. This work provides new insight into the idea that adolescent exposure to environmental level of PCBs might induce the development of NAFLD under the regulation of ER stress in males.