Preparation of core-shell structure Fe3O4@C@MnO2 nanoparticles for efficient elimination of U(VI) and Eu(III) ions

Decorating Cage-Shaped Cavities with Carboxyl Groups on Two-Dimensional MOF Nanosheet for Trace Uranium(VI) Trapping

The efficient and complete extraction of uranium from aqueous solutions is crucial for safeguarding human health from potential radiotoxicity and chemotoxicity. Herein, an ultrathin 2D metal-organic framework (MOF) nanosheet with cavity structures was elaborately constructed, based on a calix[4]arene ligand. The large molecular skeleton and cup-shaped feature of the calix[4]arene enabled the as-prepared MOFs with large layer separations, which can be readily delaminated into ultrathin single-layer (∼1.25 nm) nanosheets. The incorporation of permanent cavity structures to the MOF nanosheets can fully utilize their structural features of readily accessible adsorption groups and exposed surface area in uranium removal, reaching ultrafast adsorption kinetics; the functionalized cavity structure endowed MOF nanosheets with the ability to preconcentrate and extract uranium from aqueous solutions with ultrahigh efficiencies, even at extremely low concentrations. As a result, relatively high removal ratios (>95%) can be achieved for uranium within 5 min, even in the ultralow concentration range of 75-250 ppb, and the residual uranium was reduced to below 4.9 ppb. The MOF nanosheets also exhibited extremely high anti-interference ability, which could efficiently remove the low-level uranium (∼150 ppb) from various real samples. The characterizations and density functional theory calculations demonstrated that the synergistic effects of multiple interactions between the carboxylate groups and cage-like cavities with uranyl ions can be responsible for the efficient and selective uranium extraction.

Colorimetric sensing for the sensitive detection of UO22+via the phosphorylation functionalized mesoporous silica-based controlled release system

In this study, we developed a simple and sensitive colorimetric sensing method for the detection of UO22+, which was built to release MB from the molybdenum disulfide with a phosphate group (MoS2-PO4) gated mesoporous silica nanoparticles functionalized phosphate group (MSN-PO4) with UO22+ chelating. In the presence of UO22+, MoS2-PO4 can be effectively adsorbed onto the surface of MSN-PO4 based on the coordination chemistry for strong affinity between the P-O bond and UO22+. The adsorbed MoS2-PO4 was then utilized as an ideal gate material to control the release of signal molecules (MB) entrapped within the pores of MSN-PO4, resulting in a detectable decrease in the absorption peak at 663 nm. This colorimetric sensing demonstrated the advantages of simplicity and easy manipulation and exhibited a linear response to the concentration of UO22+ within the range of 0.02-0.2 μM. The detection limit of UO22+ was determined to be 0.85 nM, which was lower than the limit (130 nmol L-1) set by the US Environmental Protection Agency. Furthermore, the proposed colorimetric sensing method has been utilized to determine UO22+ in samples of Xiangjiang River and tap water, and a high recovery rate was achieved. This method shows promising potential in preventing and controlling environmental pollution.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Synthesis and fabrication of segregative and durable MnO2@chitosan composite aerogel beads for uranium(VI) removal from wastewater

To address the imperative need for efficient removal of uranium-containing wastewater and mitigate radioactive contamination risks associated with nuclear energy, the development of materials with high removal efficiency and facile separation is crucial. This study designed and synthesised MnO2@chitosan (CTS) composite aerogel beads by in-situ growing δ-MnO2 on porous CTS aerogel beads. This approach not only mitigates the agglomeration of MnO2 nanospheres but also significantly enhances the porous structure and surface area of MnO2@CTS. These cost-effective and eco-friendly millimeter-scale spherical aerogels exhibited convenient separation properties after adsorption. These characteristics help mitigate the risk of equipment seam blockage and secondary pollution that are often associated with powdered adsorbents. Additionally, MnO2@CTS exhibited remarkable mechanical strength (stress approximately 0.55 MPa at 60 % strain), enabling rapid separation and easy regeneration while maintaining high adsorption performance even after five cycles. Significantly, MnO2@CTS exhibited a maximum adsorption capacity of 410.7 mg/g at pH 6 and 298 K, surpassing reported values for most CTS/MnO2-based adsorbents. The chemisorption process of U(VI) on MnO2@CTS followed the pseudo-second-order kinetic and Dubinin-Radushkevish models. X-ray photoelectron spectroscopy analysis further confirmed the reduction of U(VI) to U(V/IV). These findings highlight the substantial potential of MnO2@CTS aerogel beads for U(VI) removal from aqueous solutions, positioning them as a promising solution for addressing U(VI) contamination in wastewater.

Efficient separation of uranium(VI) from aqueous solution using magnetic Co/Al layered double oxides coated with carbon dots

Herein, magnetic layered double oxides coated with carbon dots (MLCs) were synthesized through introducing sodium dodecylbenzene sulfonate and FeCl2 into Co/Al LDH for capturing uranium from aqueous solution. When the molar ratio of Co to Al was 4 : 1, the MLC composite possessed the strongest affinity to uranium(VI) in solution with short equilibrium time (<160 min), high adsorption efficiency (94.31%) and large removal capacity (513.85 mg g-1). The adsorption behavior of MLCs for uranium(VI) was well fitted with Langmuir and pseudo-second-order models, suggesting that the monolayer chemical adsorption was the rate-limiting step. Besides, MLC-3 could be reused by using 0.15 mol L-1 ethylene diamine tetraacetic acid as an eluent and the removal percentage still remained at a high level (>83.3%) after 5 adsorption/desorption cycles. Redox reaction, chemical complexation and electrostatic attraction were proved to play significant roles in uranium(VI) separation. Therefore, MLC-3 could be used as a potential adsorbent in uranium(VI)-containing wastewater treatment due to its excellent adsorption performance for uranium(VI).

Efficient removal of uranium (VI) from water by a hyper-cross-linked polymer adsorbent modified with polyethylenimine via phosphoramidate linkers

Practical adsorbents with high efficiency are essential to effectively treating wastewater. Herein, a novel porous uranium adsorbent (PA-HCP) having a considerable amount of amine and phosphoryl groups was designed and synthesized by grafting polyethyleneimine (PEI) on a hyper-cross-linked fluorene-9-bisphenol skeleton via phosphoramidate linkers. Furthermore, it was used to treat uranium contamination in the environment. PA-HCP exhibited a large specific surface area (up to 124 m2/g) and a pore diameter of 2.5 nm. Batch uranium adsorptions on PA-HCP were investigated methodically. PA-HCP demonstrated a uranium sorption capacity of >300 mg/g in the pH range of 4-10 (C0 = 60 mg/L, T = 298.15 K), with its maximum capacity reaching 573.51 mg/g at pH = 7. The uranium sorption process obeyed the pseudo-second-order model and fitted well with the Langmuir isothermal. In the thermodynamic experiments, uranium sorption on PA-HCP was revealed to be an endothermic, spontaneous process. Even in the presence of competing metal ions, PA-HCP exhibited excellent sorption selectivity for uranium. Additionally, excellent recyclability can be achieved after six cycles. Based on FT-IR and XPS measurements, both the PO and -NH2 (and/or -NH-) groups on PA-HCP contributed to efficient uranium adsorption as a result of the strong coordination between these groups and uranium. Furthermore, the high hydrophilicity of the grafted PEI improved the dispersion of the adsorbents in water and facilitated uranium sorption. These findings suggest that PA-HCP can be used as an efficient and economical sorbent to remove U(VI) from wastewater.

Versatile dodecyl trimethyl ammonium bromide modified γ-FeOOH for simultaneous removal and determination of As(Ⅴ)

Inorganic arsenic pollution in water spreads all over the world, tremendously threatening environmental safety and human health. Herein, versatile dodecyl trimethyl ammonium bromide modified γ-FeOOH (DTAB-γ-FeOOH) was prepared for sportive removal and visual determination of As(Ⅴ) in water. DTAB-γ-FeOOH displays a nanosheet-like structure with a high specific surface area calculated as 166.88 m² g^-1. Additionally, DTAB-γ-FeOOH shows peroxidase-mimicking feature, which can catalyze colorless TMB to generate blue oxidized TMB (TMBox) in presence of H₂O₂. Removal experiments show that DTAB-γ-FeOOH exhibits good As(Ⅴ) removal efficiency because modification of DTAB makes γ-FeOOH carry abundant positive charges, improving affinity between DTAB-γ-FeOOH and As(Ⅴ). It is found that theoretical maximum adsorption capacity is up to 126.91 mg g^-1. Moreover, DTAB-γ-FeOOH can resist interference of most of co-existing ions. After that, As(Ⅴ) was detected based on peroxidase-like DTAB-γ-FeOOH. As(Ⅴ) can be adsorbed onto DTAB-γ-FeOOH surface, markedly inhibiting its peroxidase-like activity. Based on it, As(Ⅴ) ranging from 1.67 to 3333.33 μg L^-1 can be well detected, with a low LOD (0.84 μg L^-1). The successful sorptive removal and visual determination of As(Ⅴ) from real environmental water indicated that DTAB-γ-FeOOH has great potential in the treatment of As(Ⅴ)-containing environment water.

As(III) removal from aqueous solutions using simultaneous oxidation and adsorption process by hierarchically magnetic flower-like Fe3O4@C-dot@MnO2 nanocomposite

In the present study, a magnetic flower-like Fe3O4@C-dot@MnO2 nanocomposite was synthesized by hydrothermal method and applied for As(III) removal by oxidation and adsorption process. Individual property of the entire material (i.e. magnetic property of Fe3O4, mesoporous surface property of C-dot and oxidation property of MnO2) make the composite efficient with good adsorption capacity for As(III) adsorption. The Fe3O4@C-dot@MnO2 nanocomposite had a saturation magnetization of 26.37 emu/g and it magnetically separated within 40 s. The Fe3O4@C-dot@MnO2 nanocomposite was able to reduce the 0.5 mg/L concentration of As(III) to 0.001 mg/L in just 150 min at pH 3. Pseudo-second-order kinetic and Langmuir isotherm model agreed with experimental data. The uptake capacity of Fe3O4@C-dot@MnO2 nanocomposite was 42.68 mg/g. The anions like chloride, sulphate and nitrate did not show any effect on removal but carbonate and phosphate influenced the As(III) removal rate. Regeneration was studied with NaOH and NaClO solution and the adsorbent was used for repeated five cycles above 80% removal capacity. The XPS studies proposed that As(III) first oxidized to As(V) then adsorb on the composite surface. This study shows the potential applicability of Fe3O4@C-dot@MnO2 nanocomposite to high extent and gives a suitable path for the proficient removal of As(III) from wastewater.

Modeling and spectroscopic investigation of U(VI) removal on porous amidoxime-functionalized metal organic framework derived from macromolecular carbohydrate

The investigation of interaction mechanism of U(VI) selective removal on amidoxime-functionalized metal organic framework (i.e., UiO-66(Zr)-AO) derived from macromolecular carbohydrate is conducive to apply metal organic frameworks in actual environmental remediation. The batch experiments showed that UiO-66(Zr)-AO displayed the fast removal rate (equilibrium time of 0.5 h), high adsorption capacity (384.6 mg/g), excellent regeneration performance (<10 % decrease after three cycles) towards U(VI) removal due to the unprecedented chemical stability, large surface area and simple fabrication. U(VI) removal at different pH can be satisfactorily fitted by diffuse layer modeling with cation exchange at low pH and an inner-sphere surface complexation at high pH. The inner-sphere surface complexation was further demonstrated by X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) analysis. These findings revealed that UiO-66(Zr)-AO can be an effective adsorbent to remove the radionuclides from aqueous solution, which is crucial for recycling of uranium resource and decreasing the uranium harm to the environment.

Radiation fabrication of hybrid activated carbon and functionalized terpolymer hydrogel for sorption of Eu(III) and Sm(III) ions

In this work, a hybrid composite of activated carbon (AC) functionalized with terpolymer hydrogel of polyvinyl alcohol/polyacrylamide/polyacrylic acid (PVA/PAAm/PAA) was prepared by γ-irradiation and used efficiently for sorption of Eu(III) and Sm(III) ions from aquatic solutions. Sewage sludge from the wastewater treatment plant was used to prepare AC, then activated by zinc chloride (ZnCl2) and thermal treatment at 550 °C. The modification of AC by functionalized terpolymer has successfully occurred mainly to limit its precipitation and to increase its adsorption capacity which allowed capable interaction with the metal ions. Different advanced techniques were used to investigate the structure and properties of (PVA/PAAm/PAA)/AC composite before and after the sorption process. Using 20 kGy is sufficient to get gel fraction of 87.5% and equilibrium swelling was 39.1 g/g. The (PVA/PAm/PAA)/AC composite hydrogel showed a pHpzc at pH ∼3. FTIR and EDS confirmed the successful integration of the functional groups and constituent elements of AC into terpolymer hydrogel components. XRD results confirmed the typical diffraction peaks of AC in the composite and the calculated average crystallite size was 167.4 nm. The SEM morphology of AC appeared as grains distributed well into the composite. The effect of synthesized AC, PVA/PAAm/PAA and (PVA/PAAm/PAA)/AC sorbents were tested to uptake of Eu(III) and Sm(III) ions. The highest uptake was noticed for (PVA/PAAm/PAA)/AC composite and it was selected for studying the parameters affecting the sorption process such as pH, shaking time, initial concentration, and adsorbent dosage. Results of the experimental data showed that Langmuir isotherm and Pseudo-second-order kinetic models fit well the sorption process of both Eu(III) and Sm(III) ions with maximum sorption capacities of 173.24 and 160.41 mg/g and uptake percentage of 82.3% and 83.4%, respectively at the optimum conditions of pH 4, 180 min, 100 mg/L metal concentration and 0.01 g adsorbent mass. The thermodynamic parameters indicated endothermic and spontaneous nature of the sorption process. Additionally, the as-prepared composite afford high selectivity and uptake capacity for Eu(III) and Sm(III) ions at pH 4 even in the presence of competing cations; Cd(II), Co(II), Sr(II) and Cs(I). The (PVA/PAAm/PAA)/AC composite was used efficiently as a unique and selective adsorbent for the sorption of Eu(III) and Sm(III) ions.

Mussel-inspired magnetic adsorbent MnO2/PDA@Fe3O4 for removing heavy metal ions contaminants in single and mixed systems

Heavy metal pollution has been a magnificent concern for a long period. A novel magnetic material, MnO₂/PDA@Fe₃O₄, was prepared in this paper. With the assistance of multiple characterization methods, it was confirmed that polydopamine coated the magnetic nucleus and acted as a dense intermediate layer for MnO₂ attachment. Having superior adsorption performance, MnO₂/PDA@Fe₃O₄ could remove heavy metal cations efficiently no matter in single or mixed systems. The maximum adsorption capacities calculated by the Langmuir model for Pb(II), Cu(II), and Cd(II) were 295.01 mg/g, 130.30 mg/g, and 115.16 mg/g, respectively. In mixed systems, the adsorbent showed obvious selectivity for Pb(II). And the variation of Cu(II) concentration was more responsible for Pb(II) adsorption than that of Cd(II). The kinetic and thermodynamic data revealed that the polluted ions immobilizations by MnO₂/PDA@Fe₃O₄ were chemisorption and were endothermic, entropy increase, spontaneous process. The presence of humic acid and coexisting ions induced only a very limited interference. In addition, MnO₂/PDA@Fe₃O₄ maintained excellent adsorption performance and stability after five cycles of adsorption and removed 98.33% Pb(II) and 71.24% Cu(II) from actual water, respectively. This study confirmed that the MnO₂/PDA@Fe₃O₄ had great potential and broad prospects to remediate the heavy metal contaminants in water.

Removal and recovery of uranium (VI) from aqueous solutions by residual sludge and its biochars

The removal and recovery of uranium (VI) from water solutions are critical for energy and environmental security. In this study, hydrochar at 100, 150, and 190 °C (HC100, HC150, and HC190) and pyrochar at 250 °C (BC250) were prepared from residual sludge (RS). The uranium (VI) adsorption behavior, recovery, and heavy metal risk of RS and its biochars were assessed. The sorption distribution coefficient of RS was higher than those of its biochars within the tested concentration range. The maximum adsorption capacity of uranium (VI) by HC190 was 121.26 mg/g at acidic pH (pH 4.5), which was higher than those of other tested biochars, previously reported unmodified biochars, and activated carbon. The zeta potential, FTIR, and XPS results implied that the adsorption of uranium (VI) by RS and its biochars was regulated by electrostatic attraction and the complexation with oxygen- and phosphorus-containing functional groups. Besides, partial reduction of uranium (VI) into uranium (IV) happened during the process of adsorption. More than 86% of the adsorbed uranium (VI) was recovered by 0.01 M hydrochloric acid and 100% by 0.01 M sodium carbonate. The leaching amount of heavy metals was greatly reduced after the sludge was converted to biochar, indicating that hydrothermal carbonization and pyrolysis can promote the stabilization of heavy metals. This work demonstrates that RS and its biochars can be implemented as low-cost, environment-friendly, and high-efficient materials for the purification of uranium (VI)-containing solutions by means of adsorption and desorption.

Highly Efficient Removal of Uranium from an Aqueous Solution by a Novel Phosphonic Acid-Functionalized Magnetic Microsphere Adsorbent

The development of adsorption materials which can efficiently isolate and enrich uranium is of great scientific significance to sustainable development and environmental protection. In this work, a novel phosphonic acid-functionalized magnetic microsphere adsorbent Fe₃O₄/P (GMA-MBA)-PO₄ was developed by functionalized Fe₃O₄/P (GMA-MBA) prepared by distill-precipitation polymerization with O-phosphoethanolamine. The adsorption process was endothermic, spontaneous and kinetically followed the pseudo second-order model. The maximum uranium adsorption capacity obtained from the Langmuir model was 333.33 mg g^-1 at 298 K. In addition, the adsorbent also had good acid resistance and superparamagnetic properties, which could be quickly separated by a magnetic field. XPS analysis showed that the adsorption of adsorbent mainly depended on the complexation of phosphonic acid group with uranium. This work offers a promising candidate for the application of magnetic adsorbents in the field of uranium separation and enrichment.

Low-temperature plasma induced phosphate groups onto coffee residue-derived porous carbon for efficient U(VI) extraction

For the continuous utilization of nuclear energy and efficient control of radioactive pollution, low-cost materials with high efficient U(VI) removal are of great importance. In this study, low temperature plasma method was applied for the successful modification of O-phosphorylethanolamine (O-PEA) on the porous carbon materials. The produced materials (Cafe/O-PEA) could adsorb U(VI) efficiently with the maximum sorption capacity of 648.54 mg/g at 1 hr, T=298 K, and pH=6.0, much higher than those of most carbon-based composites. U(VI) sorption was mainly controlled by strong surface complexation. From FTIR, SEM-EDS and XPS analyses, the sorption of U(VI) was related to the complexation with -NH₂, phosphate and -OH groups on Cafe/O-PEA. The low temperature plasma method was an efficient, environmentally friendly and low-cost method for surface modification of materials for the effective enrichment of U(VI) from aqueous solutions.

Decorating MnO2 nanosheets on MOF-derived Co3O4 as a battery-type electrode for hybrid supercapacitors

Metal–organic framework-derived materials are now considered potential next-generation electrode materials for supercapacitors. In this present investigation, Co₃O₄@MnO₂ nanosheets are synthesized using ZIF-67, which is used as a sacrificial template through a facile hydrothermal method. The unique vertically grown nanosheets provide an effective pathway for rapidly transporting electrons and ions. As a result, the ZIF-67 derived Co₃O₄@MnO₂-3 electrode material shows a high specific capacitance of 768 C g⁻¹ at 1 A g⁻¹ current density with outstanding cycling stability (86% retention after 5000 cycles) and the porous structure of the material has a good BET surface area of 160.8 m² g⁻¹. As a hybrid supercapacitor, Co₃O₄@MnO₂-3//activated carbon exhibits a high specific capacitance (82.9 C g⁻¹) and long cycle life (85.5% retention after 5000 cycles). Moreover, a high energy density of 60.17 W h kg⁻¹ and power density of 2674.37 W kg⁻¹ has been achieved. This attractive performance reveals that Co₃O₄@MnO₂ nanosheets could find potential applications as an electrode material for high-performance hybrid supercapacitors.

Metal–organic framework-derived materials are now considered potential next-generation electrode materials for supercapacitors.

Highly-efficient and easy separation of γ-Fe2O3 selectively adsorbs U(Ⅵ) in waters

The migration and transformation of uranyl [U (Ⅵ)] ions in the environment are quite dependent on the geological condition in particular with the site enriched in Fe. In this study, the interfacial interaction of U (Ⅵ) ions with maghemite (γ-Fe₂O₃) particles was studied and the interaction mechanism was explored as well. Batch experiments confirm that γ-Fe₂O₃ can effectively remove U (Ⅵ) from an aqueous solution within a relatively short reaction time (R% > 92.01% within 3 min) and has a considerable capacity for U (Ⅵ) uptake (q_t: 87.35 mg/g). γ-Fe₂O₃ displays an excellent selectivity for U (Ⅵ) elimination. Results on the effects of natural organic matter such as humic acid (HA) indicated that HA could promote the interfacial interaction between γ-Fe₂O₃ and U (Ⅵ) under acidic conditions. Compared with other radionuclides (e.g., Sr(Ⅱ) and Cs(Ⅰ)), U (Ⅵ) was more effectively removed by γ-Fe₂O₃. The U (Ⅵ) removal by γ-Fe₂O₃ is primarily due to electrostatic interactions and precipitation that result in the long-term retardation of uranium. γ-Fe₂O₃ not only can fast and selectively adsorb U (Ⅵ) but also can be magnetically recycled, demonstrating that γ-Fe₂O₃ is a cost-effective and promising material for the clean-up of uranyl ions from radioactive wastewater.

A Novel Functionalized Ionic Liquid for Highly Selective Extraction of TcO4. Inorg Chem 2022;61:10609-10617. [PMID: 35758888 DOI: 10.1021/acs.inorgchem.2c01775]

Due to the highly acidic and high-salinity nature of the high-level radioactive waste liquid (HLLW), selective extraction of TcO₄^- from HLLW remains to be a challenging task. Traditional anion exchangers show low selectivity and unsatisfactory extraction performance due to the lack of functional groups that can interact strongly with TcO₄^-. In this work, a tailor-made binding site was constructed by decorating two acetamide functional groups on imidazolium cation to fabricate a new Tc separation material, which exhibits high selectivity. Unlike most reported Tc separation materials, which can only perform well under low acidic, neutral, or alkaline conditions, this material still has good extraction performance in highly acidic solutions. In the simulated high-level waste liquid of 3 M nitric acid, the extraction efficiency of 0.5 mol/L organic phase for Tc can reach 96.5% through the first-stage extraction. Our theoretical simulations suggest that ReO₄^-/TcO₄^- anions were adsorbed on the top of the imidazolium ring during the extraction process, with p-π and p-p interactions acting as the driving forces.

Targeted synthesis of carbon-supported titanate nanofibers as host structure for nuclear waste immobilization

Inorganic ion-exchange materials show potential application for toxic radioactive ions due to their remarkable high efficiency and selectivity features. Here, two type of carbon-supported titanate (C@TNFs and C@TNFs(H)) nanofibers have been synthesized by a cost-effective in suit growth method. The resulting C@TNFs and C@TNFs(H) microspheres present uniform flower-like morphology and large surface area. The interlayer Na+ in the titanate shell provides docking sites for ion-exchange of radioactive ions (U(VI), Ba(II), and Sr(II)). Interestingly, the exceeding theoretical cation-exchange capacities (CECs) are achieved on C@TNFs for U(VI) ∼4.76 meq g−1 and Ba(II) ∼2.65 meq g−1 and C@TNFs(H) for Ba(II) ∼2.53 meq g−1 and Sr(II) ∼2.24 meq g−1, respectively. The impressive adsorption performance is mainly attributed to the synergistic effects of ion-exchange and surface complexation. More significantly, C@TNFs and C@TNFs(H) maintain high distribution coefficients (K d U) of >104 mL g−1 over a wider pH range (pH = 3.5–9.0) and high adsorption rate with short equilibrium time within 50 min. Competitive ion-exchange investigation shows a selectivity order of U(VI) > Ba(II) > Sr(II) at individual 10 ppm concentration, pH = 6.0 and T = 298 K. The related spectroscopic studies reveal the intercalative mechanism of radionuclides in the deformed titanate structure, as a result of target ions firmly trapped in the interlayer of C@TNFs and C@TNFs(H). These advantageous features allow the C@TNFs and C@TNFs(H) to be promising candidates for the remediation of toxic radioactive ions polluted water.

Chitosan-modified biochar: Preparation, modifications, mechanisms and applications

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties. In addition, compared to other adsorbents, the composite truly achieves the concept of "waste control by waste". In this paper, the preparation method, composite classification, adsorption mechanism, and models of biochar modified by chitosan are introduced, meanwhile, we also review and summarize their effects on the decontamination of wastewater and soil. In addition to common heavy metal ions, we also review the adsorption and removal of some other organic/inorganic pollutants, including (1) drug residues; (2) dyes; (3) phosphates; (4) radionuclides; (5) perfluorochemicals, etc. Moreover, challenges and prospects for the composite are presented and further studies are called for the chitosan-biochar composite. We believe that the composite will lead to further achievements in the field of environmental remediation.

Phosphate enhanced uranium stable immobilization on biochar supported nano zero valent iron

Uranium (U) immobilization from wastewater by zero valent iron (ZVI) was widely concerned through reduction and surface adsorption. Releasing of U due to re-oxidation of U(IV) into U(VI) limited the application of ZVI in U decontamination. In this work, a kind of biochar supported nano zero valent iron (Fe/BC(900)) was obtained by carbothermal reduction of starch mixed with ferric nitrate at 900 °C. U immobilization behavior by Fe/BC(900) in the presence of phosphate (P) was investigated. The U immobilization reaction was adjusted by controlling the sequence of U, Fe/BC(900) and P. U immobilization efficiency was enhanced to 99.9% in the presence of P. Reaction sequence of U, Fe/BC(900) and P influenced the U immobilization efficiency, which followed the order of (U-P)+Fe/BC(900)>(U- Fe/BC(900))+P>U+Fe/BC(900)>(P-Fe/BC(900))+U. P and nZVI both contributed to enhancing U immobilization through precipitation of uranyl-P and reductive co-precipitate (U(IV)) in a wide pH range. The released Fe ions could precipitate with uranyl and phosphate. Consumption of P and nZVI in the (P-Fe/BC(900))+U system limited U immobilization ability. The precipitate is highly dependent on U, P and Fe elements. U desorption in (U-P)+Fe/BC(900) system was not observed with stability.

Insights into selective adsorption mechanism of copper and zinc ions onto biogas residue-based adsorbent: Theoretical calculation and electronegativity difference

Modified biomass-based adsorption technique has attracted much attention in heavy metal ions removal, but selective adsorption behavior and mechanism of heavy metal ions adsorption onto biosorbent still need to be further clarified. Herein, a carboxylated biogas residue (BR-COOH) was prepared to remove the Cu²⁺ and Zn²⁺ from single/binary heavy metal ions solution and explore selective adsorption mechanism. The results exhibited that the adsorption capacities of BR-COOH for Cu²⁺ was higher than that for Zn²⁺ obviously, whether in the single or binary heavy metal ions solution. Meanwhile, the introduced carboxy groups were identified as the main sites for metal ions adsorption. Density functional theory (DFT) calculation results exhibited that the adsorption energy of Cu²⁺ (-0.51 eV) onto BR-COOH was lower than that of Zn²⁺ (-0.47 eV), indicating that the Cu²⁺ adsorbed on BR-COOH was more stable than Zn²⁺. Moreover, the metal ions adsorption capacity of BR-COOH was positively correlated with their electronegativity, which was due to that the metal ions with stronger electronegativity was more easily interacted with the negatively charged oxygen in carboxyl groups. The same results were also verified in the control experiment conducted with two other biosorbents. Therefore, the work provided a new and in-depth insight into selective adsorption of metal ions onto carboxylated biosorbent.

Application of layered double hydroxide-biochar composites in wastewater treatment: Recent trends, modification strategies, and outlook

In recent years, layered double hydroxide-biochar (LDH-BC) composites as adsorbents and catalysts for contaminants removal (inorganic anions, heavy metals, and organics) have received increasing attention and became a new research point. It is because of the good chemical stability, abundant surface functional groups, excellent anion exchange ability, and good electronic properties of LDH-BC composites. Hence, we offer an overall review on the developments and processes in the synthesis of LDH-BC composites as adsorbents and catalysts. Special attention is devoted to the strategies for enhancing the properties of LDH-BC composites, including (1) magnetic treatment, (2) acid treatment, (3) alkali treatment, (4) controlling metal ion ratios, (5) LDHs intercalation, and (6) calcination. In addition, further studies are called for LDH-BC composites and potential areas for future application of LDH-BC composites are also proposed.

Nanotechnological approaches as a promising way for heavy metal mitigation in an aqueous system

The ever-rising environmental problems because of heavy metals emerging from anthropogenic activities pose an impending threat to all biota globally. Considering their persistence and possibility in biomagnification, they are prominent among pollutants. There has been an apparent shift of research interest in advancing cost-effective and competent technologies to mitigate environmental contaminants, specifically heavy metals. In the recent two decades, tailored nanomaterials (NMs), nanoparticles, and NM-based adsorbents have been emerging for removing heavy metal pollution on a sustainable scale, especially the green synthesis of these nanoproducts effective and nonhazardous means. Hence, this review explores the various avenues in nanotechnology, an attempt to gauge nanotechnological approaches to mitigate heavy metals in the aqueous system, especially emphasizing the recent trends and advancements. Inputs on remediating heavy metal in sustainable and environmentally benign aspects recommended future directions to compensate for the voids in this domain have been addressed.

Heavy metal pollution and the role of inorganic nanomaterials in environmental remediation

Contamination of water and soil with toxic heavy metals is a major threat to human health. Although extensive work has been performed on reporting heavy metal pollutions globally, there are limited review articles on addressing this pernicious phenomenon. This paper reviews inorganic nanoparticles and provides a framework for their qualities required as good nanoadsorbents for efficient removal of heavy metals from water. Different inorganic nanoparticles including metals, metal oxides and metal sulfides nanoparticles have been applied as nanoadsorbents to successfully treat water with high contaminations of heavy metals at concentrations greater than 100 mg l^-1, achieving high adsorption capacities up to 3449 mg g^-1. It has been identified that the synthesis method, selectivity, stability, regeneration and reusability, and adsorbent separation from solution are critical parameters in deciding on the quality of inorganic nanoadsorbents. Surface functionalized nanoadsorbents were found to possess high selectivity and capacity for heavy metals removal from water even at a very low adsorbent dosage of less than 2 g l^-1, which makes them better than conventional adsorbents in environmental remediation.

Adsorption characteristics of Cr(VI) on microalgae immobilized by different carriers

To solve the problem of harvesting microalgae during heavy metal adsorption, six different carriers were selected in this study to compare the adsorption behavior of microalgae after immobilization. The results of the scanning electron microscope (SEM) and adsorption showed chitosan as a carrier showed the best immobilization effect and adsorption advantages after immobilizing microalgae. The optimal immobilized carrier-chitosan was obtained under the following conditions of chitosan: acetic acid (2:40), microalgae concentration (10⁸ cells mL^-1), and immobilization time (18 h). The optimal adsorption conditions were as follows: temperature: 30 °C, pH: 7.0, adsorption dose: 1.5 g L^-1, initial ion concentration: 40 mg L^-1. The adsorption capacity of metal ions can reach 37.1 mg g^-1 Cr(VI), 25.98 mg g^-1 Cu(II), 25.06 mg g^-1 Pb(II), and 24.62 mg g^-1 Cd(II), respectively. The desorption efficiency in 0.5 mol L^-1 NaOH desorption solution reached 90.01%. After five adsorption-desorption cycles, excluding chitosan (∼70%), the adsorption efficiency of other adsorbents decreased with an increase in the recycling times. Chitosan was a suitable carrier for the immobilization of Synechocystis sp. PCC6803. Fourier transform infrared spectroscopy and Raman spectra analysis showed that groups belonging to the microalgae were detected after the microalgae in different carriers, indicating that the microalgae were immobilized with the carriers. At the same time, the energy spectrum changed before and after adsorption indicated the specific functional groups of microalgae played an important role in the adsorption process. The kinetic and isothermal model data showed that the adsorption process was mainly chemical adsorption and homogeneous monolayer adsorption. Moreover, X-ray diffraction showed the interlayer peak strength decreased significantly, indicating that the interlayer structure was stretched after Cr(VI) ion exchange. X-ray photoelectron spectroscopy analysis showed that the Cr adsorption process involves the reduction of Cr(VI) to Cr(III).

Novel adsorbent based on carbon-modified zirconia/spinel ferrite nanostructures: Evaluation for the removal of cobalt and europium radionuclides from aqueous solutions

Herein, a novel adsorbent based on carbon-modified zirconia/spinel ferrite (C@ ZrO₂/Mn_0.5Mg_0.25Zn_0.25Fe₂O₄) nanostructures were chemically prepared to remove ⁶⁰Co and ^152+154Eu radionuclides from liquid media using batch experiments. The XRD pattern confirms the successful preparation of the C@ZrO₂/MnMgZnFe₂O₄ composite. Also, SEM and TEM images confirmed that the composite owns a heterogeneous morphology in the nanoscale range. The optical band gap value of Mn_0.5Mg_0.25Zn_0.25Fe₂O₄, ZrO₂, and the composite samples was 1.45, 2.38, and 1.54 eV, respectively. Many parameters have been studied as the effect of time, solution pH, and initial ion concentration. The kinetics models for the removal process of ^152+154Eu and ⁶⁰Co radionuclides were studied. The second-order kinetic equation could describe the sorption kinetics for both radionuclides. The Langmuir monolayer capacity for ⁶⁰Co was 82.51 mg/g and for ^152+154Eu was 136.98 mg/g. The thermodynamic parameters such as free energy ΔG^o, the enthalpy ΔH^o, and the entropy ΔS^o were calculated. The results indicated that the sorption process has endothermic nature for both two radionuclides onto C@ZrO₂/MnMgZnFe₂O₄ composite.

Metal-Organic-Framework Based Functional Materials for Uranium Recovery: Performance Optimization and Structure/Functionality-Activity Relationships

Uranium recovery has profound significance in both uranium resource acquisition and pollution treatment. In recent years, metal-organic frameworks (MOFs) have attracted much attention as potential uranium adsorbents owing to their tunable structural topology and designable functionalities. This review explores the research progress in representative classic MOFs (MIL-101, UiO-66, ZIF-8/ZIF-67) and other advanced MOF-based materials for efficient uranium extraction in aqueous or seawater environments. The uranium uptake mechanism of the MOF-based materials is refined, and the structure/functionality-property relationship is further systematically elucidated. By summarizing the typical functionalization and structure design methods, the performance improvement strategies for MOF-based adsorbents are emphasized. Finally, the present challenges and potential opportunities are proposed for the breakthrough of high-performance MOF-based materials in uranium extraction.

Efficient removal of Co(II) and Sr(II) from aqueous solution using polyvinyl alcohol/graphene oxide/MnO2 composite as a novel adsorbent

In this study, a novel adsorbent, polyvinyl alcohol/graphene oxide/MnO₂ composite was prepared, characterized and used for efficient removal of Co²⁺ and Sr²⁺ from aqueous solution. Polyvinyl alcohol (PVA) and Mn²⁺ played a synergistic role in the gelation of PVA/GO/Mn²⁺, while Mn²⁺ can be further converted into oxide to achieve functionalized aerogel (PVA/GO/MnO₂). The spectroscopy analysis manifested that hydrogen bonds and electrostatic attraction were responsible for the formation of PVA/GO/MnO₂. The functionalization of MnO₂ enhanced the adsorption capacity for Co²⁺ (2.1 folds) and Sr²⁺ (1.3 folds) by PVA/GO/MnO₂. The composite showed high adsorption capacity at broad pH range of 4.0-9.0. For competitive adsorption test, Ni²⁺/Zn²⁺ exerted the most interfering effect on Co²⁺ adsorption, while Mg²⁺/Ca²⁺ showed severe interfering effect on Sr²⁺ adsorption. Both electrostatic attraction and oxygen-containing groups contributed to the adsorption mechanism. This study may provide a new adsorbent for separation of Co²⁺ and Sr²⁺ from aqueous solution.

Magnetic Nanoparticle Composites: Synergistic Effects and Applications

Composite materials are made from two or more constituent materials with distinct physical or chemical properties that, when combined, produce a material with characteristics which are at least to some degree different from its individual components. Nanocomposite materials are composed of different materials of which at least one has nanoscale dimensions. Common types of nanocomposites consist of a combination of two different elements, with a nanoparticle that is linked to, or surrounded by, another organic or inorganic material, for example in a core-shell or heterostructure configuration. A general family of nanoparticle composites concerns the coating of a nanoscale material by a polymer, SiO2 or carbon. Other materials, such as graphene or graphene oxide (GO), are used as supports forming composites when nanoscale materials are deposited onto them. In this Review we focus on magnetic nanocomposites, describing their synthetic methods, physical properties and applications. Several types of nanocomposites are presented, according to their composition, morphology or surface functionalization. Their applications are largely due to the synergistic effects that appear thanks to the co-existence of two different materials and to their interface, resulting in properties often better than those of their single-phase components. Applications discussed concern magnetically separable catalysts, water treatment, diagnostics-sensing and biomedicine.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

A bifunctional robust metal sulfide with highly selective capture of Pb2+ ions and luminescence sensing ability for heavy metals in aqueous media

A 3-D metal sulfide ion exchanger (MSIE) with extra-framework H+ ions showed a remarkable capability for sorption of Pb2+ ions and highly efficient luminescence sensing properties towards various heavy metal ions.