Rapid duplexed detection of illicit drugs in wastewater using gold nanoparticle conjugated aptamer sensors

Aptamer-based biosensors for wastewater surveillance of influenza virus, SARS-CoV-2, and norovirus: A comprehensive review

Wastewater-based epidemiological (WBE) surveillance has emerged as a crucial tool for monitoring infectious diseases within communities. However, its broader application is frequently constrained by the high costs, labor-intensive processes, and extended timeframes required for sample collection, transportation, and processing. Aptamer-based biosensors offer a promising alternative, leveraging the specific binding properties of aptamers to biomolecules for the on-site and rapid quantification of disease biomarkers in wastewater. This review systematically evaluates recent advancements in the application of aptamer-based biosensors for the detection of key pathogens, including influenza viruses, SARS-CoV-2, and norovirus, within wastewater matrices. The discussion encompasses the technical stability and reliability of signal transmission associated with these biosensors, as well as the current challenges faced in real-world implementation. Noteworthy progress has been made in the development of these biosensors for WBE, achieving detection limits as low as femtomolar (fM) levels in buffer and linear dynamic ranges extending up to five orders of magnitude for viruses such as influenza and SARS-CoV-2. Despite this progress, considerable hurdles remain to be addressed before these technologies can be effectively deployed in practical settings, especially within complex wastewater environments. Key factors affecting detection performance include matrix interference, environmental variability, and the diminished stability of both viral targets and aptamer-target interactions in wastewater. This review not only highlights these challenges but also outlines potential avenues for future research aimed at enhancing the functionality and applicability of aptamer-based biosensors in WBE, ultimately contributing to more effective public health surveillance and disease monitoring strategies.

Ratiometric fluorescence probes for visible detection and accurate identification of MPEA vapor

Methamphetamine (MA), as one kind of overflowed synthetic illicit drugs, has posed severe threats to health and social security. However, the on-site and visible fluorescence detection to MA remains limited. Herein, through covalently coupling diphenylacridine (DPA) and dimethylacridine (DMA) with pyridine, two ratiometric fluorescence probes (PyDPA and PyDMA) are constructed, which present rapid response, bathochromic-shifts over 100 nm and visible fluorescence color changes from blue to cyan upon the exposure to methylphenethylamine (MPEA, a simulant of MA). And the similar responses are observed for MA in confiscated samples. Further, a smartphone-based quantitative detected system is established to provide the on-site trace detection of MPEA as ppb level. Specially, PyDPA or PyDMA can identify MPEA from its interferences according to the unique ratiometric response based on their dual-emission-enhancement. Here, we show two ratiometric fluorescence probes to MA and MPEA with high potential for on-site application.

The Evolution of Illicit-Drug Detection: From Conventional Approaches to Cutting-Edge Immunosensors-A Comprehensive Review

The increasing use of illicit drugs has become a major global concern. Illicit drugs interact with the brain and the body altering an individual's mood and behavior. As the substance-of-abuse (SOA) crisis continues to spread across the world, in order to reduce trafficking and unlawful activity, it is important to use point-of-care devices like biosensors. Currently, there are certain conventional detection methods, which include gas chromatography (GC), mass spectrometry (MS), surface ionization, surface-enhanced Raman spectroscopy (SERS), surface plasmon resonance (SPR), electrochemiluminescence (ECL), high-performance liquid chromatography (HPLC), etc., for the detection of abused drugs. These methods have the advantage of high accuracy and sensitivity but are generally laborious, expensive, and require trained operators, along with high sample requirements, and they are not suitable for on-site drug detection scenarios. As a result, there is an urgent need for point-of-care technologies for a variety of drugs that can replace conventional techniques, such as a biosensor, specifically an immunosensor. An immunosensor is an analytical device that integrates an antibody-based recognition element with a transducer to detect specific molecules (antigens). In an immunosensor, the highly selective antigen-antibody interaction is used to identify and quantify the target analyte. The binding event between the antibody and antigen is converted by the transducer into a measurable signal, such as electrical, optical, or electrochemical, which corresponds to the presence and concentration of the analyte in the sample. This paper provides a comprehensive overview of various illicit drugs, the conventional methods employed for their detection, and the advantages of immunosensors over conventional techniques. It highlights the critical need for on-site detection and explores emerging point-of-care testing methods. The paper also outlines future research goals in this field, emphasizing the potential of advanced technologies to enhance the accuracy, efficiency, and convenience of drug detection.

Point-of-care testing of methamphetamine and cocaine utilizing wearable sensors

The imperative for the point-of-care testing of methamphetamine and cocaine in drug abuse prevention necessitates innovative solutions. To address this need, we have introduced a multi-channel wearable sensor harnessing CRISPR/Cas12a system. A CRISPR/Cas12a based system, integrated with aptamers specific to methamphetamine and cocaine, has been engineered. These aptamers function as signal-mediated intermediaries, converting methamphetamine and cocaine into nucleic acid signals, subsequently generating single-stranded DNA to activate the Cas12 protein. Additionally, we have integrated a microfluidic system and magnetic separation technology into the CRISPR system, enabling rapid and precise detection of cocaine and methamphetamine. The proposed sensing platform demonstrated exceptional sensitivity, achieving a detection limit as low as 0.1 ng/mL. This sensor is expected to be used for on-site drug detection in the future.

Deep learning-assisted mass spectrometry imaging for preliminary screening and pre-classification of psychoactive substances

Currently, it is of great urgency to develop a rapid pre-classification and screening method for suspected drugs as the constantly springing up of new psychoactive substances. In most researches, psychoactive substances classification approaches depended on the similar chemical structures and pharmacological action with known drugs. Such approaches could not face the complicated circumstance of emerging new psychoactive substances. Herein, mass spectrometry imaging and convolutional neural networks (CNN) were used for preliminary screening and pre-classification of suspected psychoactive substances. Mass spectrometry imaging was performed simultaneously on two brain slices as one was from blank group and another one was from psychoactive substance-induced group. Then, fused neurotransmitter variation mass spectrometry images (Nv-MSIs) reflecting the difference of neurotransmitters between two slices were achieved through two homemade programs. A CNN model was developed to classify the Nv-MSIs. Compared with traditional classification methods, CNN achieved better estimation accuracy and required minimal data preprocessing. Also, the specific region on Nv-MSIs and weight of each neurotransmitter that affected the classification most could be unraveled by CNN. Finally, the method was successfully applied to assist the identification of a new psychoactive substance seized recently. This sample was identified as cannabinoids, which greatly promoted the screening process.

An electrochemical aptasensor for methylamphetamine rapid detection by single-on mode based on competition with complementary DNA

A simple and rapid electrochemical sensing method with high sensitivity and specificity of aptamers was developed for the detection of methylamphetamine (MAMP). A short anti-MAMP thiolated aptamer (Apt) with a methylene blue (MB) probe at 3'-end was immobilized on the surface of a gold electrode (MB-Apt-S/GE). The electrochemical signal appeared when MAMP presenting in the sample solution competed with cDNA for binding with MB-Apt-S. Under optimized conditions, the liner range of this signal-on electrochemical aptasensor for the detection of MAMP achieved from 1.0 to 10.0 nmol/L and 10.0-400 nmol/L. LOD 0.88 nmol/L were obtained. Satisfactory spiked recoveries of saliva and urine were also obtained. In this method, only 5 min were needed to incubate before the square wave voltammetry (SWV) analysis, which was much more rapid than other electrochemical sensors, leading to a bright and broad prospect for the detection of MAMP in biological sample. This method can be used for on-site rapid detection on special occasions, such as drug driving scenes, entertainment venues suspected of drug use, etc.

Electrospinning of bovine serum albumin-based nano-fibers: From synthesis to medical prospects; Challenges and future directions

Bovine serum albumin (BSA) is a globular non-glycoprotein that has gotten a lot of attention because of its unique properties like biocompatibility, biodegradability, non-immunogenicity, non-toxicity, and strong resemblance to the natural extracellular matrix (ECM). Given its robust mechanical properties, such as interfacial tension, conductivity, swelling resistance, and viscoelasticity, it can be concluded that it is an appropriate matrix for producing novel BSA-based nanoconstructs. Thus, simple analytic methods are required for accurately detecting BSA as a model protein in medical sciences and healthcare. Furthermore, the characteristics mentioned above aid BSA in the electrospinning process, which results in fibers conjugated with other polymers. Electrospun synthesis has recently received much attention for its ability to produce stable, biomimicking, highly porous, 3D BSA-derived nano-fibers. As a result, BSA-based nano-fibers have achieved exclusive developments in the medical sector, such as tissue engineering for the remodeling of damaged tissue or organ repair by creating artificial ones. Meanwhile, they could be used as drug delivery systems (DDS) for target-specific drug delivery, wound dressings, and so on. This study illustrates the structural and physicochemical properties of BSA and the determination of BSA using various methods, by citing recent reports and current developments in the medical field. Furthermore, current challenges and future directions are also highlighted.

Machine learning assisted-nanomedicine using magnetic nanoparticles for central nervous system diseases

Magnetic nanoparticles possess unique properties distinct from other types of nanoparticles developed for biomedical applications. Their unique magnetic properties and multifunctionalities are especially beneficial for central nervous system (CNS) disease therapy and diagnostics, as well as targeted and personalized applications using image-guided therapy and theranostics. This review discusses the recent development of magnetic nanoparticles for CNS applications, including Alzheimer's disease, Parkinson's disease, epilepsy, multiple sclerosis, and drug addiction. Machine learning (ML) methods are increasingly applied towards the processing, optimization and development of nanomaterials. By using data-driven approach, ML has the potential to bridge the gap between basic research and clinical research. We review ML approaches used within the various stages of nanomedicine development, from nanoparticle synthesis and characterization to performance prediction and disease diagnosis.

Antibody-Conjugated Electrospun Nanofibers for Electrochemical Detection of Methamphetamine

Multifunctional electrospun nanofibers (ENs) with improved properties have increased attention nowadays. Their insoluble forms in water with decreased hydrophobicity are desired for the immobilization of biological molecules. Also, the addition of functional groups on the backbone provides the conjugation of biomolecules onto the surface of ENs via covalent bonds to increase their stability. Here, poly(vinylidene fluoride) (PVDF) was chosen to prepare a platform, which is insoluble in water, and polyethylenimine (PEI) was used to add amine groups on the surface of ENs to bind biological molecules via covalent conjugation. So, PVDF-PEI nanofibers were prepared on a glassy carbon electrode to immobilize an antimethamphetamine antibody (Anti-METH) as a model biomolecule. The obtained PVDF-PEI/Anti-METH was used for the bioelectrochemical detection of methamphetamine (METH), a common illicit drug. Bioelectrochemical detection of METH on PVDF-PEI/Anti-METH-coated electrodes was carried out by voltammetry in the range of 2.0-50 ng/mL METH. Moreover, the effect of dansyl chloride (DNC) derivatization of METH on the sensitivity of PVDF-PEI/Anti-METH was tested. Finally, METH analysis was carried out in synthetic body fluids. The obtained results showed that PVDF-PEI ENs can be adopted as an immobilization matrix for the biorecognition elements of biobased detection systems, and the derivative of METH (METH-DNC) increased the sensitivity of PVDF-PEI/Anti-METH.

Rapid detection and speciation of illicit drugs via a thin-film microextraction approach for wastewater-based epidemiology study

High detection frequency of illicit drugs in water samples urges the development of rapid detection method for wastewater-based epidemiology (WBE) study. Here, we first developed a fast, convenient, and cost-effective method by combining thin-film microextraction (TFME) with gas chromatography-mass spectrometry (GC-MS) for sensing illicit drugs in wastewater sample. A divinylbenzene particle-loaded membrane was prepared by dip coating on a copper mesh. The sampling conditions of three illicit drugs were optimized and the performance of the proposed method was evaluated. The limit of detection was 5.5 2.0, and 1.1 ng L^-1 for methamphetamine (MAMP), ketamine (KET), and methaqualone (MEQA), respectively, with acceptable precision (< 6.1 % for membrane to membrane reproducibility) and recovery from influent water (95 % - 111 %). Then, the proposed method was applied to study the occurrence and distribution of the target compounds in a wastewater treatment plant. The presence of methamphetamine, ketamine, and methaqualone was confirmed and their concentrations in the influent sample were 57 ± 8, 40 ± 4, and 75 ± 2 ng L^-1, respectively. The speciation of the target compounds in different ponds was also investigated. Results showed that the content of organic matter and the pH of the sample significantly affected the binding state of the compounds. This work provides an efficient and accurate analytical protocol for WBE investigation of illicit drugs.

Optimization of an rGO-based biosensor for the sensitive detection of bovine serum albumin: Effect of electric field on detection capability

Despite significant progress in the field of biosensing, the impact of electric field on biosensor detection capability and the feasibility of the biosensor application in wastewater has yet to be investigated. The objective of this study was to develop a low-cost, highly sensitive, and selective reduced graphene oxide (rGO)-based biosensor. The constructed biosensor consists of an in-house prepared GO and a four-terminal Kelvin sensing. Spin-coating was chosen as the deposition technique and results revealed an optimal GO number of layers and concentration of 7 and 2 mg/mL, respectively. Experiments to determine the effects of electric field on the performance of the biosensor showed significant changes in the biosensor surface, also presenting a direct impact on the biosensor functionality, such that the biosensor showed an increase in limit of detection (LOD) from 1 to 10⁶ fg/mL when the applied voltage was increased from 0.0008 to 0.2 V. Furthermore, this study successfully explores a pilot scale setup, mimicking wastewater flow through sewage pipelines. The demonstrated improvements in the detection capability and sensitivity of this biosensor at optimized testing conditions make it a promising candidate for further development and deployment for the detection of protein analytes present at very low concentrations in aqueous solutions. In addition, the application of this biosensor could be extended to the detection of protein analytes of interest (such as the spike protein of SARS-CoV-2) in much more complex solutions, like wastewater.

Rapid, Multianalyte Detection of Opioid Metabolites in Wastewater

By monitoring opioid metabolites, wastewater-based epidemiology (WBE) could be an excellent tool for real-time information on the consumption of illicit drugs. A key limitation of WBE is the reliance on costly laboratory-based techniques that require substantial infrastructure and trained personnel, resulting in long turnaround times. Here, we present an aptamer-based graphene field effect transistor (AptG-FET) platform for simultaneous detection of three different opioid metabolites. This platform provides a reliable, rapid, and inexpensive method for quantitative analysis of opioid metabolites in wastewater. The platform delivers a limit of detection 2-3 orders of magnitude lower than previous reports, but in line with the concentration range (pg/mL to ng/mL) of these opioid metabolites present in real samples. To enable multianalyte detection, we developed a facile, reproducible, and high-yield fabrication process producing 20 G-FETs with integrated side gate platinum (Pt) electrodes on a single chip. Our devices achieved the selective multianalyte detection of three different metabolites: noroxycodone (NX), 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP), and norfentanyl (NF) in wastewater diluted 20× in buffer.

Target biorecognition-triggered assembly of a G-quadruplex DNAzyme-decorated nanotree for the convenient and ultrasensitive detection of antibiotic residues

The abuse of kanamycin (Kana) in many fields has led to increasing antibiotic pollution problems and serious threats to public health. Therefore, determining how to develop methods to realize the convenient detection of antibiotics in complicated environmental matrices is highly desirable. In this study, we utilized a target biorecognition-triggered hybridization chain reaction (HCR) assembly of a G-quadruplex DNAzyme (G-DNAzyme)-decorated nanotree to develop a novel homogeneous colorimetric biosensing method for the convenient and ultrasensitive detection of Kana antibiotic residues in real samples. Through the designed aptamer-recognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme) strand can be liberated. Thus, its catalyzed cleavage of the hairpin substrates anchored at a DNA nanowire will cause the assembled formation of an HCR-initiator; this process can be greatly amplified by the exonuclease III-assisted target recycling and the MNAzyme-catalyzed release of another MNAzyme strand. Based on the DNA-nanowire-accelerated HCR assembly of many G-DNAzyme-decorated DNA duplexes on the two sides of the nanowire, a DNA nanotree decorated by numerous G-DNAzymes will form to realize the ultrasensitive colorimetric signal output. Under the optimal conditions, this method exhibited a wide five-order-of-magnitude linear range and a very low detection limit of 28 fg mL^-1. In addition, excellent selectivity, repeatability, and reliability were also demonstrated for this homogeneous bioassay method. These unique features along with its automatic manipulation and low assay cost show promise for practical applications.

Preparation of polydopamine-functionalized mesoporous silica-coated core/shell magnetic nanocomposite for efficiently extracting five amphetamine-type stimulants from wastewater followed by UPLC-MS/MS determination

Wastewater-based epidemiology (WBE) was a near-real-time monitoring strategy for illegal drugs. However, solid-phase extraction (SPE) widely used in WBE was time-consuming and labor-intensive to extract ultra-trace target compounds from wastewater. In this study, a convenient magnetic solid-phase extraction (MSPE) approach based on newly designed and synthesized polydopamine functionalized core-shell magnetic mesoporous silica (Fe₃O₄@nSiO₂@mSiO₂@PDA) nanocomposite was synthesized and firstly utilized for simultaneously extracting five amphetamine-type stimulants (ATSs) from wastewater samples. Subsequently, ultrahigh performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method coupled with optimal MSPE was developed for determination of ultra-trace ATSs in wastewater. The validation results indicated a favorable linearity ranging from 1 to 200 ng L^-1, low limit of detection (0.5-2.5 ng L^-1), and qualified recovery (95.1-106.6%) and repeatability (0.6-6.2%). In addition, the Fe₃O₄@nSiO₂@mSiO₂@PDA nanoparticles could be reused for at least ten times without significant loss of the adsorption efficiencies of ATSs. Finally, the MSPE-UPLC-MS/MS method was successfully applied to real wastewater samples with the results that the preparation procedure was shrunk from 2 h to 30 min without obvious decline of extraction efficiency compared with the SPE. Hence, based on merits of the novel Fe₃O₄@nSiO₂@mSiO₂@PDA nanocomposite, the proposed method is convenient and reliable for determination of ATSs in wastewater.

Recent advances in the biosensors application for the detection of bacteria and viruses in wastewater

The presence of disease-causing pathogens in wastewater can provide an excellent diagnostic tool for infectious diseases. Biosensors are far superior to conventional methods used for regular infection screening and surveillance testing. They are rapid, sensitive, inexpensive portable and carry no risk of exposure in their detection schemes. In this context, this review summarizes the most recently developed biosensors for the detection of bacteria and viruses in wastewater. The review also provides information on the new detection methods aimed at screening for SARS-CoV-2, which has now caused more than 4 million deaths. In addition, the review highlights the potential behind on-line and real-time detection of pathogens in wastewater pipelines. Most of the biosensors reported were not targeted to wastewater samples due to the complexity of the matrix. However, this review highlights on the performance factors of recently developed biosensors and discusses the importance of nanotechnology in amplifying the output signals, which in turn increases the accuracy and reliability of biosensors. Current research on the applicability of biosensors in wastewater promises a dramatic change to the conventional approach in the field of medical screening.

Recyclable Magnetic Fluorescence Sensor Based on Fe3O4 and Carbon Dots for Detection and Purification of Methcathinone in Sewage

Sensitive, rapid, and low-cost detection of drug traces in sewage is very important for drug monitoring and control. In this study, a dual functional and recyclable magnetic fluorescent molecularly imprinted polymers (MFMIPs) sensor with high sensitivity for rapid detection and purification of methcathinone in sewage was developed. MFMIPs was prepared via molecular imprinting and conjugation with carbon dots as a fluorescent reporter on Fe₃O₄ (Fe₃O₄-MIPs@CDs). With strong recognition and adsorption toward methcathinone by the specific cavities on the surface of MFMIPs, the fluorescence of the sensor could dramatically be quenched once anchored with methcathinone. Under optimal conditions, the MFMIPs sensor presented high sensitivity with a linear range of 0.5-100 nM and a detection limit of 0.2 nM, which would be used to monitor drug prevalence and consumption within a certain region. This sensor was applied to the assay of methcathinone in sewage samples collected from Yuebeiyuan, Yanghu, and Xujiahu sewage pumping stations of Yuelu District. The calculated concentrations of methcathinone were 4.80, 15.33, and 8.59 nM in sewage samples, which were in good agreement with data tested by LC-MS/MS. For another function, MFMIPs exhibited purification toward methcathinone and the adsorption capacity was about 0.27 mg/g in a real sewage sample. Moreover, the sensor could be recycled and reused at least five times with the aid of an external magnetic field. Collectively, with good analytical performance and excellent recognition and selectivity to methcathinone, the proposed sensing system based on the magnetic core and molecularly imprinted polymers would open a door to establish highly sensitive and effective sensing systems for sewage analysis and purification.

Colorimetric determination of Listeria monocytogenes using aptamer and urease dual-labeled magnetic nanoparticles and cucurbit[7]uril-mediated supramolecular assembly of gold nanoparticle

A host-guest colorimetric strategy is described for the detection of Listeria monocytogenes (L. monocytogenes). The optical probes were self-assembled based on the supramolecular interactions between the carbonyl groups of cucurbit[7]uril portals and gold nanoparticles (CB[7]-AuNPs). Aptamer and urease modified magnetic nanoparticles were used to specifically recognize and binding to L. monocytogenes, simultaneously hydrolyzing urea to produce ammonium ion (NH₄⁺) that can reverse CB[7] induced AuNPs aggregation. In the presence of L. monocytogenes, the above-mentioned magnetic conjugates preferentially bind to the bacterial surface, which results in blocking the catalytic active sites, thus inhibiting the production of ammonium ions. The normalized absorbance ratio of A_{700 nm}/A_{525 nm} was proportional to the L. monocytogenes concentration ranging from 10 to 10⁶ cfu·mL^-1, and the visual determination can be done down to 10 cfu·mL^-1. For spiked food samples analyzed without pre-enrichment, recoveries of 98.4% to 99.3% were achieved could be verified and RSD were less than 10%. This work may offer a broad prospect for sensitive and specific determination  of pathogens.

Identification of biomarkers in wastewater-based epidemiology: Main approaches and analytical methods

Wastewater-based epidemiology (WBE) has become popular to estimate the use of drugs of abuse and recently to establish the incidence of CoVID 19 in large cities. However, its possibilities have been expanded recently as a technique that allows to establish a fingerprint of the characteristics of a city, such as state of health/disease, healthy/unhealthy living habits, exposure to different types of contaminants, etc. with respect to other cities. This has been thanks to the identification of human biomarkers as well as to the fingerprinting and profiling of the characteristics of the wastewater catchment that determine these circumstances. The purpose of this review is to analyze the different methodological schemes that have been developed to perform this biomarker identification as well as the most characteristic analytical techniques in each scheme, their advantages and disadvantages and the knowledge gaps identified. We also discussed the future scope for development.

Recent trends in nanomaterial-based signal amplification in electrochemical aptasensors

Ultrasensitive biosensors have become a necessity in the world of scientific research, and several signal enhancement strategies have been employed to attain exceptionally low detection limits. Nanotechnology turns out to be a strong contender for signal amplification, as they can be employed as platform modifiers, catalysts, carriers or labels. Here, we have described the most recent advancements in the utilization of nanomaterials as signal amplification components in aptamer-based electrochemical biosensors. We have briefly reviewed the methods that utilized nanomaterials, namely gold and carbon, as well as nanocomposites such as: graphene, carbon nanotubes, quantum dots, and metal-organic frameworks.

Biosensors for wastewater-based epidemiology for monitoring public health

Public health is attracting increasing attention due to the current global pandemic, and wastewater-based epidemiology (WBE) has emerged as a powerful tool for monitoring of public health by analysis of a variety of biomarkers (e.g., chemicals and pathogens) in wastewater. Rapid development of WBE requires rapid and on-site analytical tools for monitoring of sewage biomarkers to provide immediate decision and intervention. Biosensors have been demonstrated to be highly sensitive and selective tools for the analysis of sewage biomarkers due to their fast response, ease-to-use, low cost and the potential for field-testing. This paper presents biosensors as effective tools for wastewater analysis of potential biomarkers and monitoring of public health via WBE. In particular, we discuss the use of sewage sensors for rapid detection of a range of targets, including rapid monitoring of community-wide illicit drug consumption and pathogens for early warning of infectious diseases outbreaks. Finally, we provide a perspective on the future use of the biosensor technology for WBE to enable rapid on-site monitoring of sewage, which will provide nearly real-time data for public health assessment and effective intervention.

Chemical sensing with Au and Ag nanoparticles

Noble metal nanoparticles (NPs) are ideal scaffolds for the fabrication of sensing devices because of their high surface-to-volume ratio combined with their unique optical and electrical properties which are extremely sensitive to changes in the environment. Such characteristics guarantee high sensitivity in sensing processes. Metal NPs can be decorated with ad hoc molecular building blocks which can act as receptors of specific analytes. By pursuing this strategy, and by taking full advantage of the specificity of supramolecular recognition events, highly selective sensing devices can be fabricated. Besides, noble metal NPs can also be a pivotal element for the fabrication of chemical nose/tongue sensors to target complex mixtures of analytes. This review highlights the most enlightening strategies developed during the last decade, towards the fabrication of chemical sensors with either optical or electrical readout combining high sensitivity and selectivity, along with fast response and full reversibility, with special attention to approaches that enable efficient environmental and health monitoring.

Paper-based nanosensors to evaluate community-wide illicit drug use for wastewater-based epidemiology

Wastewater-based epidemiology (WBE) is a powerful technique for monitoring illicit drugs of abuse in the community. Here, we report upon a surface-enhanced Raman spectroscopy (SERS) sensor for the sensitive and selective detection of methamphetamine based upon the assembly of noble metal core-shell nanoparticles on a bespoke glassy nanofibrous electrospun paper matrix. The hierarchical structure of the fibrous paper, modified with the synthesized Au@Ag core-shells (Au@Ag) gave strong SERS signalling, enabling us to evaluate the community-wide prevalence of methamphetamine in wastewater treatment plants within Beijing. We show that, when normalized for the daily flow of the wastewater treatment plants and for population density, higher mass loads of drugs are generally found in sewage influent from urban areas, implying greater local methamphetamine usage than that in less populated areas. The user-friendly and disposable paper sensors demonstrate the applicability of rapid on-site illicit drug detection, illustrating the application to wastewater-based epidemiology, which has the potential to inform government agencies regarding societal interventions.

Nanomaterial-based aptamer sensors for analysis of illicit drugs and evaluation of drugs consumption for wastewater-based epidemiology

The abuse of illicit drugs usually associated with dramatic crimes may cause significant problems for the whole society. Wastewater-based epidemiology (WBE) has been demonstrated to be a novel and cost-effective way to evaluate the abuse of illicit drugs at the community level, and has been used as a routine method for monitoring and played a significant role for combating the crimes in some countries, e.g. China. The method can also provide temporal and spatial variation of drugs of abuse. The detection methods mainly remain on the conventional liquid chromatography coupled with mass spectrometry, which is extremely sensitive and selective, however needs advanced facility and well-trained personals, thus limit it in the lab. As an alternative, sensors have emerged to be a powerful analytical tool for a wide spectrum of analytes, in particular aptamer sensors (aptasensors) have attracted increasing attention and could act as an efficient tool in this field due to the excellent characteristics of selectivity, sensitivity, low cost, miniaturization, easy-to-use, and automation. In this review, we will briefly introduce the context, specific assessment process and applications of WBE and the recent progress of illicit drug aptasensors, in particular focusing on optical and electrochemical sensors. We then highlight several recent aptasensors for illicit drugs in new technology integration and discuss the feasibility of these aptasensor for WBE. We will summarize the challenges and propose our insights and opportunity on aptasensor for WBE to evaluate community-wide drug use trends and public health.

Smart Sanitation-Biosensors as a Public Health Tool in Sanitation Infrastructure

The health of individuals and communities is more interconnected than ever, and emergent technologies have the potential to improve public health monitoring at both the community and individual level. A systematic literature review of peer-reviewed and gray literature from 2000-present was conducted on the use of biosensors in sanitation infrastructure (such as toilets, sewage pipes and septic tanks) to assess individual and population health. 21 relevant papers were identified using PubMed, Embase, Global Health, CDC Stacks and NexisUni databases and a reflexive thematic analysis was conducted. Biosensors are being developed for a range of uses including monitoring illicit drug usage in communities, screening for viruses and diagnosing conditions such as diabetes. Most studies were nonrandomized, small-scale pilot or lab studies. Of the sanitation-related biosensors found in the literature, 11 gathered population-level data, seven provided real-time continuous data and 14 were noted to be more cost-effective than traditional surveillance methods. The most commonly discussed strength of these technologies was their ability to conduct rapid, on-site analysis. The findings demonstrate the potential of this emerging technology and the concept of Smart Sanitation to enhance health monitoring at the individual level (for diagnostics) as well as at the community level (for disease surveillance).

Paper-based microfluidics for rapid diagnostics and drug delivery

Paper is a common material that is promising for constructing microfluidic chips (lab-on-a-paper) for diagnostics and drug delivery for biomedical applications. In the past decade, extensive research on paper-based microfluidics has accumulated a large number of scientific publications in the fields of biomedical diagnosis, food safety, environmental health, drug screening and delivery. This review focuses on the recent progress on paper-based microfluidic technology with an emphasis on the design, optimization and application of the technology platform, in particular for medical diagnostics and drug delivery. Novel advances have concentrated on engineering paper devices for point-of-care (POC) diagnostics, which could be integrated with nucleic acid-based tests and isothermal amplification experiments, enabling rapid sample-to-answer assays for field testing. Among the isothermal amplification experiments, loop-mediated isothermal amplification (LAMP), an extremely sensitive nucleic acid test, specifically identifies ultralow concentrations of DNA/RNA from practical samples for diagnosing diseases. We thus mainly focus on the paper device-based LAMP assay for the rapid infectious disease diagnosis, foodborne pathogen analysis, veterinary diagnosis, plant diagnosis, and environmental public health evaluation. We also outlined progress on paper microfluidic devices for drug delivery. The paper concludes with a discussion on the challenges of this technology and our insights into how to advance science and technology towards the development of fully functional paper devices in diagnostics and drug delivery.

Gold nanoparticles synthesised by flavonoid tricetin as a potential antibacterial nanomedicine to treat respiratory infections causing opportunistic bacterial pathogens

In this study, flavonoid tricetin was used as a reducing and capping agent for the synthesis of gold nanoparticles (AuNPs). Further, the antibacterial efficacy of the synthesised AuNPs was evaluated against the opportunistic bacterial pathogens that cause respiratory infections. The optimum levels for the synthesis of AuNPs were found to be pH 8, temperature 30 °C, tricetin 125 μM and chloroauric acid 250 μM. The tricetin synthesised AuNPs exhibited in spherical shape with an average size of 12 nm. FT-IR results confirmed that the hydroxyl (OH) and carbonyl (CO) groups of tricetin were mainly participated in the synthesis of AuNPs. The opportunistic bacterial pathogens isolated from immunocompromised patients suffering with different respiratory infections were identified as Staphylococcus aureus, Enterobacter xiangfangensis, Bacillus licheniformis, Escherichia fergusonii, Acinetobacter pittii, Pseudomonas aeruginosa, Aeromonas enteropelogenes and Proteus mirabilis. The antibacterial studies confirmed the broad-spectrum antibacterial activity of AuNPs against the tested Gram-positive and Gram-negative bacteria. The synthesised AuNPs showed high biocompatibility on primary normal human dermal fibroblast (NHDF-c) cells up to 50 μM mL^-1. Best of our knowledge, this is the first report on the synthesis of AuNPs using tricetin, which may be a potential antibacterial nanomedicine to treat bacterial infections.