Sequestration and potential release of PFAS from spent engineered sorbents

Leaching of per- and polyfluoroalkyl substances (PFAS) from food contact materials with implications for waste disposal

Leaching of per- and polyfluoroalkyl substances (PFAS) during the post-consumer disposal of food contact materials (FCMs) poses a potential environmental threat but has seldom been evaluated. This study characterized the leaching behavior of PFAS and unidentified precursors from six common FCMs and assessed the impact of environmental conditions on PFAS release during disposal. The total concentration of 21 PFAS ranged from 3.2 to 377 ng/g in FCMs, with PFAS leachability into water varying between 1.1-42.8 %. Increasing temperature promoted PFAS leaching, with leached nine primary PFAS (∑9PFAS) reaching 46.3, 70.4, and 102 ng/L at 35, 45, and 55 ℃, respectively. Thermodynamic analysis (∆G>0, ∆H>0, and ∆S<0) indicated hydrophobic interactions control PFAS leaching. The presence of dissolved organic matter in synthetic leachate increased the leached ∑9PFAS from 47.1 to 103 ng/L but decreased PFBS, PFOS, and 6:2 FTS leaching. The total release of seven perfluorocarboxylic acids (∑7PFCAs) from takeaway food packaging waste was estimated to be 0.3-8.2 kg/y to landfill leachate and 0.6-15.4 kg/y to incineration plant leachate, contributing 0.2-4.8 % and 0.1-3.2 % of total ∑7PFCAs in each leachate type. While the study presents a refined methodology for estimating PFAS release during disposal, future research is needed on the indirect contribution from precursors.

Natural mineral and industrial solid waste-based adsorbent for perfluorooctanoic acid and perfluorooctane sulfonate removal from surface water: Advances and prospects

PER: and polyfluorinated alkyl substances, especially perfluorooctanoic acid and perfluorooctane sulfonic acid (PFOX), have attracted considerable attention lately because of their widespread occurrence in aquatic environment and potential biological toxicity to animals and human beings. The development of economical, efficient, and engineerable adsorbents for removing PFOX in water has become one of the research focuses. This review summarized the recent progress on natural mineral and industrial solid based adsorbent (NM&ISW-A) and removal mechanisms concerning PFOX onto NM&ISW-A, as well as proposed the current challenges and future perspectives of using NM&ISW-A for PFOX removal in water. Kaolinite and montmorillonite are usually used as model clay minerals for PFOX removal, and have been proved to adsorb PFOX by ligand exchange and electrostatic attraction. Fe-based minerals, such as goethite, magnetite, and hematite, have better PFOX adsorption capacity than clay minerals. The adsorbent prepared from industrial solid waste by high temperature roasting has great potential application prospects. Fabricating nanomaterials, amination modification, surfactant modification, fluorination modification, developing versatile composites, and designing special porous structure are beneficial to improve the adsorption performance of PFOX onto NM&ISW-A by enhancing the specific surface area, positive charge, and hydrophobicity. Electrostatic interaction, hydrophobic interaction, hydrogen bond, ligand and ion exchange, and self-aggregation (formation of micelle or hemimicelle) are the main adsorption mechanisms of PFOX by NM&ISW-A. Among them, electrostatic and hydrophobic interactions play a considerable role in the removal of PFOX by NM&ISW-A. Therefore, NM&ISW-A with electrostatic functionalities and considerable hydrophobic segments enables rapid, efficient, and high-capacity removal of PFOX. The future directions of NM&ISW-A for PFOX removal include the preparation and regeneration of engineerable NM&ISW-A, the development of coupling technology for PFOX removal based on NM&ISW-A, the in-depth research on adsorption mechanism of PFOX by NM&ISW-A, as well as the development of NM&ISW-A for PFOX alternatives removal. This review paper would be helpful the comprehensive understanding of NM&ISW-A potential for PFOX removal and the PFOX removal mechanisms, and identifies the gaps for future research and development.

Regeneration of exhausted adsorbents after PFAS adsorption: A critical review

The adsorption process efficiently removes per- and polyfluoroalkyl substances (PFAS) from water, but managing exhausted adsorbents presents notable environmental and economic challenges. Conventional disposal methods, such as incineration, may reintroduce PFAS into the environment. Therefore, advanced regeneration techniques are imperative to prevent leaching during disposal and enhance sustainability and cost-effectiveness. This review critically evaluates thermal and chemical regeneration approaches for PFAS-laden adsorbents, elucidating their operational mechanisms, the influence of water quality parameters, and their inherent advantages and limitations. Thermal regeneration achieves notable desorption efficiencies, reaching up to 99% for activated carbon. However, it requires significant energy input and risks compromising the adsorbent's structural integrity, resulting in considerable mass loss (10-20%). In contrast, chemical regeneration presents a diverse efficiency landscape across different regenerants, including water, acidic/basic, salt, solvent, and multi-component solutions. Multi-component solutions demonstrate superior efficiency (>90%) compared to solvent-based solutions (12.50%), which, in turn, outperform salt (2.34%), acidic/basic (1.17%), and water (0.40%) regenerants. This hierarchical effectiveness underscores the nuanced nature of chemical regeneration, significantly influenced by factors such as regenerant composition, the molecular structure of PFAS, and the presence of organic co-contaminants. Exploring the conditional efficacy of thermal and chemical regeneration methods underscores the imperative of strategic selection based on specific types of PFAS and material properties. By emphasizing the limitations and potential of particular regeneration schemes and advocating for future research directions, such as exploring persulfate activation treatments, this review aims to catalyze the development of more effective regeneration processes. The ultimate goal is to ensure water quality and public health protection through environmentally sound solutions for PFAS remediation efforts.

Maximum desorption of perfluoroalkyl substances adsorbed on granular activated carbon used in full-scale drinking water treatment plants

Activated carbon adsorption is an effective method for removing perfluoroalkyl substances (PFAS) from water. However, the observation that higher concentrations of PFAS are observed after treatment than before (i.e., desorption) is an important, unsolved issue. In this study, to elucidate PFAS desorption and its relationship with PFAS properties, we conducted solvent extraction and long-term desorption experiments using granular activated carbon (GAC) that had been loaded with PFAS in two actual drinking water treatment plants. The amount of PFAS extracted from GAC depended on the depth in the GAC filter; longer-chain and hydrophobic PFAS were present in relatively higher amounts in the shallow part compared to the deep part of the GAC filter, whereas shorter-chain and hydrophilic PFAS were present in relatively higher amounts in the deep part compared to the shallow part. This pattern was probably due to a chromatographic effect by which hydrophilic PFAS adsorbed once, subsequently desorbed, and migrated from the shallow part of the GAC filter to the deeper part. The desorption potential of PFAS to water (i.e., the maximum amount of PFAS desorbed to water per unit mass of GAC) was estimated by conducting long-term bottle-point desorption tests and analyzing the relationship between the equilibrium water-phase concentration of PFAS in a bottle containing GAC and the amount of PFAS desorbed to water per unit GAC mass. The desorption ratio (ratio of desorption potential to loading) was the highest for PFAS for which the logarithm of the octanol/water distribution coefficient (Log DOW) ranged from -1 to 1. The implication was that most of those PFAS removed by GAC were likely to return to the water as the external water-phase concentrations dropped. The decrease of the desorption ratio to 20 % as Log DOW increased suggested irreversible adsorption due to hydrophobic affinity.

In vitro and in vivo remediation of per- and polyfluoroalkyl substances by processed and amended clays and activated carbon in soil

Remediation methods for soil contaminated with poly- and perfluoroalkyl substances (PFAS) are needed to prevent their leaching into drinking water sources and to protect living organisms in the surrounding environment. In this study, the efficacy of processed and amended clays and carbons as soil amendments to sequester PFAS and prevent leaching was assessed using PFAS-contaminated soil and validated using sensitive ecotoxicological bioassays. Four different soil matrices including quartz sand, clay loam soil, garden soil, and compost were spiked with 4 PFAS congeners (PFOA, PFOS, GenX, and PFBS) at 0.01-0.2 μg/mL and subjected to a 3-step extraction method to quantify the leachability of PFAS from each matrix. The multistep extraction method showed that PFAS leaching from soil was aligned with the total carbon content in soil, and the recovery was dependent on concentration of the PFAS. To prevent the leaching of PFAS, several sorbents including activated carbon (AC), calcium montmorillonite (CM), acid processed montmorillonite (APM), and organoclays modified with carnitine, choline, and chlorophyll were added to the four soil matrices at 0.5-4 % w/w, and PFAS was extracted using the LEAF method. Total PFAS bioavailability was reduced by 58-97 % by all sorbents in a dose-dependent manner, with AC being the most efficient sorbent with a reduction of 73-97 %. The water leachates and soil were tested for toxicity using an aquatic plant (Lemna minor) and a soil nematode (Caenorhabditis elegans), respectively, to validate the reduction in PFAS bioavailability. Growth parameters in both ecotoxicological models showed a dose-dependent reduction in toxicity with value-added growth promotion from the organoclays due to added nutrients. The kinetic studies at varying time intervals and varying pHs simulating acidic rain, fresh water, and brackish water suggested a stable sorption of PFAS on all sorbents that fit the pseudo-second-order for up to 21 days. Contaminated soil with higher than 0.1 μg/mL PFAS may require reapplication of soil amendments every 21 days. Overall, AC showed the highest sorption percentage of total PFAS from in vitro studies, while organoclays delivered higher protection in ecotoxicological models (in vivo). This study suggests that in situ immobilization with soil amendments can reduce PFAS leachates and their bioavailability to surrounding organisms. A combination of sorbents may facilitate the most effective remediation of complex soil matrices containing mixtures of PFAS and prevent leaching and uptake into plants.

Strategies to improve adsorption and photocatalytic performance of metal-organic frameworks (MOFs) for perfluoroalkyl and polyfluoroalkyl substances (PFASs) removal from water: A review

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) represent a category of persistent and hazardous organic pollutants extensively prevalent across aquatic environments. The combination of adsorption and photocatalytic degradation has been identified as an effective approach for removing trace amounts of PFASs from water. Among the various materials explored for this purpose, metal-organic frameworks (MOFs) have structural solid tunability, and suitable modification methods could endow them with rich adsorption capabilities and excellent photocatalytic performance, which has potential for applications involving the treatment of trace, multi-chain-length PFASs in water. The research within this realm is currently in its nascent phase, and a holistic knowledge of modification methods can provide a comprehensive framework for future studies. Therefore, this review intends to (1) summarize the mechanism underlying the adsorption and photocatalytic removal of PFASs by MOFs; (2) present various modification methods aimed at enhancing the adsorption and photocatalytic performance of MOFs in alignment with the goal mentioned above; (3) provide an outlook on the prospects of utilizing MOFs for PFASs removal based on current trends and data. Ultimately, the findings from these studies will contribute to advancing knowledge in this area and facilitate the development of effective strategies for addressing PFASs contamination in water systems.

Multicomponent PFAS sorption and desorption in common commercial adsorbents: Kinetics, isotherm, adsorbent dose, pH, and index ion and ionic strength effects

The adsorption and desorption of 9 PFAS, including 3 perfluoroalkyl sulphonic and 6 perfluoroalkyl carboxylic acids, in artificial groundwater was investigated using 3 commercial adsorbents that comprised a powdered activated carbon (PAC), a surface-modified organoclay (NMC+n), and a carbonaceous organic amendment (ROAC). Sorption kinetics and isotherms of PFAS, as well as the effects of adsorbent dose, pH, index ion and ionic strength on PFAS adsorption and desorption were investigated. Sorption of multicomponent PFAS in the adsorbents was rapid, especially for NMC+n and ROAC, regardless of PFAS chain length. The sorption and (and especially) desorption of PFAS in the adsorbents was impacted by the pH, index ion, and ionic strength of simulated groundwater, especially for the short chain PFAS, with only minimal impacts on NMC+n and PAC compared to ROAC. Although the potential mineral and charged constituents of the adsorbents contributed to the adsorption of short chain PFAS through electrostatic interactions, these interactions were susceptible to variable groundwater chemistry. Hydrophobic interactions also played a major role in facilitating and increasing PFAS sorption, especially in adsorbents with aliphatic functional groups. The desorption of PFAS from the adsorbents was below 8 % when the aqueous phase was deionised water, with no measurable desorption for NMC+n. In contrast, the desorption of short chain PFAS in simulated groundwater increased substantially (30-100 %) in the adsorbents, especially in ROAC and NMC+n, but more so with ROAC. In general, the three adsorbents exhibited strong stability for the long chain PFAS, especially the perfluoroalkyl sulphonic acids, with minimal to no sorption reversibility under different pH and ionic composition of simulated groundwater. This study highlights the importance of understanding not only the sorption of PFAS in groundwater using adsorbents, but also the desorption of PFAS, which may be useful for decision making during the ex-situ and in-situ treatment of PFAS-contaminated groundwater.

Products, reactive species and mechanisms of PFOA degradation in a self-pulsing discharge (SPD) plasma reactor

Non-thermal plasma is a promising tool for novel technologies to treat water contaminated by recalcitrant pollutants. We report here on products, reactive species and mechanisms of the efficient degradation of perfluorooctanoic acid (PFOA) achieved with a self-pulsing discharge developed previously in our lab. Air or argon were used as plasma feed gas, ultrapure or tap water as aqueous medium. Identified organic intermediate products arise from chain-shortening and defluorination reactions, the latter achieving not only C-F to C-H exchange (hydro-de-fluorination), as reported in the literature, but also C-F to C-OH exchange (hydroxy-de-fluorination). In contrast with chain-shortening, yielding lower homologues of PFOA via selective cleavage of the C-C bond at the carboxylate group, defluorination occurs at various sites of the alkyl chain giving mixtures of different isomeric products. Plasma generated reactive species were investigated under all experimental conditions tested, using specific chemical probes and optical emission spectroscopy. Cross-analysis of the results revealed a striking direct correlation of energy efficiency for PFOA degradation and for production of plasma electrons. In contrast, no correlation was observed for emission bands of either Ar+ or OH radical. These results indicate a prevalent role of plasma electrons in initiating PFOA degradation using self-pulsing discharge plasma above the liquid.

A systematic study of the competitive sorption of per- and polyfluoroalkyl substances (PFAS) on colloidal activated carbon

Treatment of environmental media contaminated with per- and polyfluoroalkyl substances (PFAS) is crucial to mitigate mounting health risks associated with exposure. Colloidal activated carbon (CAC) has shown promise in treating contaminated soils, but understanding the interaction among PFAS during sorption is necessary for optimal remediation. This study investigated the extent to which PFAS of varying chain lengths and functional groups compete for sorption to CAC. Batch tests were conducted with natural soil and spiked water, using CAC at 0.2% w/w to remove seven PFAS with individual starting concentrations up to 0.05 mmol L-1. PFAS sorption to CAC was evaluated in three systems: a composite mixture of all studied compounds, a binary-solute system, and a single-solute system. The sorption experiments exhibited strong PFAS affinity to CAC, with removal rates between 41% and 100%, and solid/liquid partition coefficients (Kd) between 10 and 104 L kg-1. Differences were noticed among the various spiking mixtures, based on perfluorocarbon chain length, functional group, and the starting PFAS concentrations. Competition effects were detected when PFAS were in a multi-solute system, with an average 10% drop in removal, which can evidently become more relevant at higher concentrations, due to the observed non-linearity of the sorption process. The PFAS most vulnerable to competition effects in multi-solute systems were the short-chain perfluoropentanoic acid (PFPeA) and perfluorobutane sulfonic acid (PFBS), with an up to 25% reduction in removal. In bi-solute systems, perfluorooctane sulfonamide (FOSA) dominated over its ionisable counterparts, i.e. perfluorooctane sulfonic acid (PFOS) and perfluorononanoic acid (PFNA), indicating the importance of hydrophobic effects or layer formation in the sorption process. These results underscore the importance of considering competition in PFAS sorption processes when designing and implementing remediation techniques for PFAS-contaminated media.

Revealing the factors resulting in incomplete recovery of perfluoroalkyl acids (PFAAs) when implementing the adsorbable and extractable organic fluorine methods

Per- and polyfluoroalkyl substances (PFASs) are environmental contaminants of concern. Techniques that quantify total organic fluorine (TOF) such as the adsorbable organic fluorine (AOF) and extractable organic fluorine (EOF) methods are important for PFAS risk assessments. The objective of this study was to systematically evaluate each step of the AOF (loading, washing, combustion) and EOF (loading, washing, elution, combustion) methods for the recovery of ten ultrashort-, short-, and long-chain unsubstituted perfluoroalkyl acids (PFAAs). We measured the overall recovery of fluoride for each method for each PFAA, and the recovery of each PFAA around the loading, washing, and elution steps. We also measured the combustion efficiency of each PFAA by direct combustion. The overall AOF and EOF recovery ranged from 9.3%-103.3% to 21.0%-108.1%, respectively, with higher recoveries measured for PFAAs with increasing chain length in both methods. The three ultrashort-chain PFAAs (trifluoroacetic acid, perfluoropropionic acid, and perfluoropropanesulfonic acid) exhibited the lowest overall recoveries from 9.3-25.2% for AOF and 21.0-51.5% for EOF. We found that decreases in the overall recovery are the result of losses of ultrashort- and short-chain PFAAs during the washing step and the incomplete mineralization of perfluoroalkyl sulfonic acids during combustion for AOF and incomplete elution of short- and long-chain PFAAs and the loss of ultrashort-chain PFAAs during the washing step for EOF. Our data suggest that the EOF method is more appropriate than the AOF method for measuring TOF in samples containing ultrashort- and short-chain PFAAs and that methodological improvements are possible with a focus on the washing, elution, and combustion steps.

Analysis of a Passive Sampling Device to Assess the Behavior of Per- and Polyfluoroalkyl Substances in Sediments

Per- and polyfluoroalkyl substances (PFAS) are an emerging class of compounds that cause health and environmental problems worldwide. In aquatic environments, PFAS may bioaccumulate in sediment organisms, which can affect the health of organisms and ecosystems. As such, it is important to develop tools to understand their bioaccumulation potential. In the present study, the uptake of perfluorooctanoic acid (PFOA) and perfluorobutane sulfonic acid (PFBS) from sediments and water was assessed using a modified polar organic chemical integrative sampler (POCIS) as a passive sampler. While POCIS has previously been used to measure time-weighted concentrations of PFAS and other compounds in water, in our study, the design was adapted for analyzing contaminant uptake and porewater concentrations in sediments. The samplers were deployed into seven different tanks containing PFAS-spiked conditions and monitored over 28 days. One tank contained only water with PFOA and PFBS, three tanks contained soil with 4% organic matter, and three tanks contained soil combusted at 550 °C to minimize the influence of labile organic carbon. The uptake of PFAS from the water was consistent with previous research using a sampling rate model or simple linear uptake. For the samplers placed in the sediment, the uptake process was explained well using a mass transport based on the external resistance from the sediment layer. Uptake of PFOS in the samplers occurred faster than that of PFOA and was more rapid in the tanks containing the combusted soil. A small degree of competition was observed between the two compounds for the resin, although these effects are unlikely to be significant at environmentally relevant concentrations. The external mass transport model provides a mechanism to extend the POCIS design for measuring porewater concentrations and sampling releases from sediments. This approach may be useful for environmental regulators and stakeholders involved in PFAS remediation. Environ Toxicol Chem 2023;42:2171-2183. © 2023 SETAC.

Toward systematic understanding of adsorptive removal of legacy and emerging per-and polyfluoroalkyl substances (PFASs) by various activated carbons (ACs)

Per-and polyfluoroalkyl substances (PFASs) have received great attention due to their persistence, bioaccumulation and toxicity. Various activated carbons (ACs) exhibit wide variability in adsorptive performance towards PFASs. In order to gain a systematic understanding of adsorptive removal of legacy and emerging PFASs by ACs, the adsorption of ten PFASs on various ACs was comprehensively investigated. Results showed that granular activated carbon-1 (GAC-1) and powdered activated carbon-1 (PAC-1) removed more than 90% of all target PFASs. Particle size, surface charge, and micropores quantity of ACs were closely related to their performance for PFASs removal. Electrostatic interaction, hydrophobic interaction, surface complexation and hydrogen bonding were the adsorption mechanisms, with hydrophobic interaction being the predominant adsorptive force. Physical and chemical adsorption were both involved in PFAS adsorption. The removal rates of PFASs by GAC-1 decreased from 93%-100% to 15%-66% in the presence of 5 mg/L fulvic acid (FA). GAC was able to remove more PFASs under acidic medium, whereas PAC removed hydrophobic PFASs better under the neutral medium. The removal rates of PFASs by GAC-3 increased significantly from 0%-21% to 52%-97% after being impregnated with benzalkonium chlorides (BACs), demonstrating the superiority of this modification method. Overall, this study provided theoretical support for removing PFASs from water phase with ACs.

Physical and chemical properties of carbon-based sorbents that affect the removal of per- and polyfluoroalkyl substances from solution and soil

Removal of per- and polyfluoroalkyl substances (PFASs) from water or their immobilization in soil using carbon-based sorbents is one of the cost-effective techniques. Considering the variety of carbon-based sorbents, identifying the key sorbent properties responsible for PFASs removal from solution or immobilization in the soil can assist in the selection of the best sorbents for management of contaminated sites. This study evaluated the performance of 28 carbon-based sorbents including granular and powdered activated carbon (GAC and PAC), mixed mode carbon mineral material, biochars, and graphene-based materials (GNBs). The sorbents were characterized for a range of physical and chemical properties. PFASs' sorption from an AFFF-spiked solution was examined via a batch experiment, while their ability to immobilize PFASs in soil was tested following mixing, incubation and extraction using the Australian Standard Leaching Procedure. Both soil and solution were treated with 1 % w/w sorbents. Comparing different carbon-based materials, PAC, mixed mode carbon mineral material and GAC were the most effective in sorbing PFASs in both solution and soil. Among the different physical characteristics measured, the sorption of long-chain and more hydrophobic PFASs in both soil and solution was best correlated with sorbent surface area measured using methylene blue, which highlights the importance of mesopores in PFASs sorption. Iodine number was found to be a better indicator of the sorption of short-chain and more hydrophilic PFASs from solution but was found to be poorly correlated with PFASs immobilization in soil for activated carbons. Sorbents with a net positive charge performed better than those with a net negative charge, or no net charge. This study showed that surface area measured by methylene blue and surface charge are the best indicators of sorbent performance with respect to sorption/reducing leaching of PFASs. These properties may be helpful in selecting sorbents for PFASs remediation of soils/waters.

Sorption affinity and mechanisms of per-and polyfluoroalkyl substances (PFASs) with commercial sorbents: Implications for passive sampling

Effective monitoring tools, including passive samplers, are essential for the wide range of per- and polyfluoroalkyl substances (PFASs) in aquatic matrices. However, knowledge of the extent and mechanisms of PFASs sorption with sorbents in a passive sampling context is limited. To address this, sorption behavior of 45 anionic, neutral and zwitterionic PFASs ranging in perfluorocarbon chain length (C₃-C₁₆) and functional groups with 11 different commercial sorbents (cross-linked β-cyclodextrin polymers, activated carbon, anion exchange (AE), cation exchange, hydrophilic-lipophilic balanced (HLB) and non-polar) was investigated. A broad range of equilibrium sorbent-MilliQ water (MQ) distribution coefficients (K_d) were observed (10^-1.95 to 10^8.30 mL g^-1). Similar sorbent types (e.g., various AE and HLB sorbents) exhibited very different sorption behavior, likely due to their different polymeric structures and relative importance of sorbate/sorbent interactions other than coulombic interactions. HLB and AE with hydroxyl functionalities are most effective for sampling of the full suite of PFASs. Reduced sorptive affinity was observed in the presence of matrix co-constituents in wastewater influent for most PFASs. HLB had the smallest reduction in log K_d in wastewater suggesting that these sorbents are appropriate for applications in complex matrices. Sufficient sorbent capacity was observed for linear uptake of many target analytes which facilitates passive sampling.

PFAS adsorbent selection: The role of adsorbent use rate, water quality, and cost

Per- and polyfluoroalkyl substance (PFAS) contamination in aqueous matrices has intensified the search for PFAS adsorbents with elevated capacity, selectivity, and cost effectiveness. A novel surface modified organoclay (SMC) adsorbent was evaluated for PFAS removal performance in parallel with granular activated carbon (GAC) and ion exchange resin (IX) for the treatment of five distinct PFAS impaired waters including groundwater, landfill leachate, membrane concentrate and wastewater effluent. Rapid small scale column tests (RSSCTs) and breakthrough modeling were coupled to provide insight on adsorbent performance and cost for multiple PFAS and water types. IX exhibited the best performance with respect to adsorbent use rates in treatment of all tested waters. IX was nearly four times more effective than GAC and two times more effective than SMC in the treatment of PFOA from water types excluding groundwater. Employed modeling strengthened the comparison of adsorbent performance and water quality to infer adsorption feasibility. Further, evaluation of adsorption was extended beyond PFAS breakthrough with the inclusion of unit adsorbent cost as a decision metric influencing adsorbent selection. An analysis of levelized media cost indicated treatment of landfill leachate and membrane concentrate was at least three times more expensive than groundwaters or wastewaters evaluated.

Development of novel fluor mop materials for remediation of perfluoroalkyl substances (PFAS) from groundwater

In this study we synthesized a library of 12 novel adsorbent materials that utilize a chemically well-defined silica support for superior removal of PFAS from real groundwater from a contaminated United States Air Force base. The library of sorbents probed the importance of a fluorous, hydrophobic, and electrostatic components in the removal efficacy. The materials were assessed in batch studies with PFOA, PFOS, and PFBA and compared directly to GAC and Ion Exchange resin. Adsorption kinetics with PFOS were best fit to a pseudo-second order model and equilibrium data fit well to a Langmuir isotherm model. The results were also validated externally, and the best performing material removed greater than 90% of 8 PFAS tested and was able to be regenerated up to 5 cycles. The results provide a top performing material that with further testing can be used to clean up environmentally contaminated water and provide support for the theory that a fluorous component when combined with the electrostatic and hydrophobic components, imparts both enhanced PFAS selectivity and functional resilience to the material.

Stabilisation of PFAS in soils: Long-term effectiveness of carbon-based soil amendments

Immobilisation/stabilisation is one of the most developed and studied approaches for treating soils contaminated with per- and poly-fluoroalkyl substances (PFAS). However, its application has been inhibited by insufficient understanding of the effectiveness of added soil sorbents over time. Herein, we present results on the effectiveness of select carbon-based sorbents, over 4 years (longevity) and multiple laboratory leaching conditions (durability). Standard batch leaching tests simulating aggressive, worst-case scenario conditions for leaching (i.e., shaking for 24-48 h at high liquid/solid ratios) were employed to test longevity and durability of stabilisation in clay-loam and sandy-loam soils historically contaminated with PFAS (2 and 14 mg/kg ∑₂₈ PFAS). The different sorbents, which were applied at 1-6% (w/w), reduced leaching of PFAS from the soils to varying degrees. Among the 5 sorbents tested, initial assessments completed 1 week after treatment revealed that 2 powdered activated carbon (PAC) sorbents and 1 biochar were able to reduce leaching of PFAS in the soil by at least 95%. Four years after treatment, the performance of the PAC sorbents did not significantly change, whilst colloidal AC improved and was able to reduce leaching of PFAS by at least 94%. The AC-treated soils also appeared to be durable and achieved at least 95% reduction in PFAS leaching under repetitive leaching events (5 times extraction) and with minimal effect of pH (pH 4-10.5). In contrast, the biochars were affected by aging and were at least 22% less effective in reducing PFAS leaching across a range of leaching conditions. Sorbent performance was generally consistent with the sorbent's physical and chemical characteristics. Overall, the AC sorbents used in this study appeared to be better than the biochars in stabilising PFAS in the long term.

A critical review of the occurrence, fate and treatment of per- and polyfluoroalkyl substances (PFASs) in landfills

The aim of this critical review is i) to summarize the occurrence of Per- and polyfluoroalkyl substances (PFASs) in landfills; ii) to outline the environmental fate and transport of PFASs in landfills; iii) to compare the treatment technologies of PFASs in landfill leachate and remediation methods of PFASs in surrounding groundwater; iv) to identify the research gaps and suggest future research directions. In recent years, PFASs have been detected in landfills around the world, among which Perfluoroalkyl acids (PFAAs) especially Perfluorooctanoic acid (PFOA) and Perfluorooctane sulfonic acid (PFOS) are mostly studied due to their long-term stability. Short-chain PFASs (<8 carbons) are more common than long-chain PFASs (≧8 carbons) in landfill leachate. PFASs in landfill leachate are eventually transported to the surrounding groundwater, surface water and soil. Some PFASs evaporate from landfills to the ambient air. To avoid the environmental and health risks of PFASs in landfills, new technologies and combined use of existing technologies have been implemented to treat PFASs in landfill leachate. Integrated remediation methods are applied to control the diffusion of PFASs in groundwater surrounding landfills. In future, the mechanisms of PFAAs precursors degradation, the correlation among PFASs in different environmental media around landfills, as well as the environmental behavior and toxic effect of combined pollutants together with PFASs in landfill leachate and surrounding groundwater should be studied.

The role of PFAS in unsettling ocean carbon sequestration

Poly- and perfluoroalkyl substances (PFAS) and global climate change have attracted worldwide attention. PFAS have been found all across the planet, from the polar regions to the global ocean. Global oceans have emerged as a substantial sink for the carbon in the environment due to their remarkable capacity to absorb atmospheric carbon. Oceans absorb around 24% of the world's CO₂ emissions. Thus, the ocean plays a prominent role in the earth's carbon cycle. However, the widespread application of PFAS in a wide range of products and the inefficient management of PFAS-containing wastes made them ubiquitous pollutants, which are increasingly getting as a pollutant of emerging concern. Marine PFAS pollutants can produce harmful effects on gas exchange and the ocean's carbon cycle. Thus, it leads to an increase in greenhouse gas emissions, which eventually adversely affects global warming and climate change. Consequently, threats of marine PFAS to oceans carbon sequestration are discussed in this paper. Marine PFAS pollutants adversely affect the following sectors: (1) The growth and photosynthesis of phytoplankton, (2) development and reproduction of zooplankton by causing toxicity in zooplankton, (3) marine biological pomp, and (4) carbon stock of oceans. In this way, marine PFAS can pose a threat to ocean carbon sequestration. It is expected that this study can develop knowledge about the potential impact of PFAS on ocean carbon sequestration. However, the need for further research to investigate the hidden dimensions of this issue, including the potential scope and scale of this impact, should not be overlooked.

Atomistic insights into the hydrodefluorination of PFAS using silylium catalysts

Fluorochemicals are a persistent environmental contaminant that require specialized techniques for degradation and capture. In particular, recent attention on per- and poly-fluoroalkyl substances (PFAS) has led to numerous explorations of different techniques for degrading the super-strong C-F bonds found in these fluorochemicals. In this study, we investigated the hydrodefluorination mechanism using silylium-carborane salts for the degradation of PFAS at the density functional theory (DFT) level. We find that the degradation process involves both a cationic silylium (Et₃Si⁺) and a hydridic silylium (Et₃SiH) to facilitate the defluorination and hydride-addition events. Additionally, the role of carborane ([HCB₁₁H₅F₆]^-) is to force unoccupied anti-bonding orbitals to be partially occupied, weakening the C-F bond. We also show that changing the substituents on carborane from fluorine to other halogens weakens the C-F bond even further, with iodic carborane ([HCB₁₁H₅I₆]^-) having the greatest weakening effect. Moreover, our calculations reveal why the C-F bonds are resistant to degradation, and how the silylium-carborane chemistry is able to chemically transform these bonds into C-H bonds. We believe that our results are further applicable to other halocarbons, and can be used to treat either our existing stocks of these chemicals or to treat concentrated solutions following filtration and capture.

Highly efficient degradation of PFAS and other surfactants in water with atmospheric RAdial plasma (RAP) discharge

Atmospheric plasma offers a viable approach to new water remediation technologies, best suited for the degradation of persistent organic pollutants such as PFAS, per- and polyfluoroalkyl substances. This paper reports on the remarkable performance of a novel RAdial Plasma (RAP) discharge reactor in treating water contaminated with PFAS surfactants, notably the ubiquitous perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS). RAP proved to be versatile and robust, performing very well over a wide range of pollutants concentrations. Thus, PFOA degradation was most satisfactory with regard to all critical indicators, kinetics (≥99% PFOA conversion in less than 2.5 min and 30 min in solutions with initial concentrations of 41 μg/L and 41 mg/L, respectively), byproducts, and energy efficiency (G₅₀ greater than 2000 mg/kWh for 41 μg/L - 4.1 mg/L PFOA initial concentrations). Likewise for PFOS as well as for Triton X-100, a common fluorine-free non-ionic surfactant tested to explore the scope of applicability of RAP to the degradation of surfactants in general. The results obtained with RAP compare most favourably with those reported for state-of-art plasma systems in similar experiments. RAP's excellent performance is attributed to the dense network of radial discharges it generates, randomly spread over the entire exposed surface of the liquid thus establishing an extended highly reactive plasma-liquid interface with both strongly reducing and oxidizing species. Mechanistic insight is offered based on the observed degradation products and on available literature data on the surfactants properties and on their plasma induced degradation investigated in previous studies.

PFOS Mass Flux Reduction/Mass Removal: Impacts of a Lower-Permeability Sand Lens within Otherwise Homogeneous Systems

Perfluorooctane sulfonic acid (PFOS) is one of the most common per- and polyfluoroalkyl substances (PFAS) and is a significant risk driver for these emerging contaminants of concern. A series of two-dimensional flow cell experiments was conducted to investigate the impact of flow field heterogeneity on the transport, attenuation, and mass removal of PFOS. A simplified model heterogeneous system was employed consisting of a lower-permeability fine sand lens placed within a higher-permeability coarse sand matrix. Three nonreactive tracers with different aqueous diffusion coefficients, sodium chloride, pentafluorobenzoic acid, and β-cyclodextrin, were used to characterize the influence of diffusive mass transfer on transport and for comparison to PFOS results. The results confirm that the attenuation and subsequent mass removal of the nonreactive tracers and PFOS were influenced by mass transfer between the hydraulically less accessible zone and the coarser matrix (i.e., back diffusion). A mathematical model was used to simulate flow and transport, with the values for all input parameters determined independently. The model predictions provided good matches to the measured breakthrough curves, as well as to plots of reductions in mass flux as a function of mass removed. These results reveal the importance of molecular diffusion and pore water velocity variability even for systems with relatively minor hydraulic conductivity heterogeneity. The impacts of the diffusive mass transfer limitation were quantified using an empirical function relating reductions in contaminant mass flux (MFR) to mass removal (MR). Multi-step regression was used to quantify the nonlinear, multi-stage MFR/MR behavior observed for the heterogeneous experiments. The MFR/MR function adequately reproduced the measured data, which suggests that the MFR/MR approach can be used to evaluate PFOS removal from heterogeneous media.

Properties and Mechanisms for PFAS Adsorption to Aqueous Clay and Humic Soil Components

The proliferation of poly- and perfluorinated alkyl substances (PFASs) has resulted in global concerns over contamination and bioaccumulation. PFAS compounds tend to remain in the environment indefinitely, and research is needed to elucidate the ultimate fate of these molecules. We have investigated the model humic substance and model clay surfaces as a potential environmental sink for the adsorption and retention of three representative PFAS molecules with varying chain length and head groups. Utilizing molecular dynamics simulation, we quantify the ability of pyrophyllite and the humic substance to favorably adsorb these PFAS molecules from aqueous solution. We have observed that the hydrophobic nature of the pyrophyllite surface makes the material well suited for the sorption of medium- and long-tail PFAS moieties. Similarly, we find a preference for the formation of a monolayer on the surface for long-chain PFAS molecules at high concentration. Furthermore, we discussed trends in the adsorption mechanisms for the fate and transport of these compounds, as well as potential approaches for their environmental remediation.

A review on per- and polyfluorinated alkyl substances (PFASs) in microplastic and food-contact materials

Plastic, paper and cardboard are widely used as food contact materials (FCMs), due to its numerous favourable characteristics. However, they are usually coated with hazardous substances, such as per- and polyfluorinated alkyl substances (PFASs). PFASs, with its functional properties of oil- and water-repellency, can migrate from FCMs into the food and cause potential risk to human health. There are also increasing concerns about the harm that FCMs can cause to the environment. These concerns include accumulation of non-degradable plastics in the environment, generation of microplastics (MPs) and nanoplastics, and release of PFASs from FCMs. While many reviews have been conducted on PFASs in the environment, including their occurrence, fate, toxicity, biodegradation, migration in ecosystems and remediation technologies, a systematic review of PFASs in FCMs and MPs is currently lacking. In addition, our knowledge of the PFAS sorption processes on MPs is rather limited, and in particular their desorption processes. Thus, this review aims to (1) review the presence of various classes of PFASs in FCMs and their migration into food, (2) review the PFASs in MPs and summarize the sorption mechanisms, and factors that influence their sorption behaviour on MPs in the aquatic environment, and (3) identify the current research gaps and future research directions to predict the risks associated with the presence and sorption of PFASs in FCMs and MPs.

Activated carbon versus metal-organic frameworks: A review of their PFAS adsorption performance

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a class of fluorinated aliphatic compounds considered as emerging persistent pollutants. Owing to their adverse effects on human health and environment, efficient methods of their removal from various complex matrices need to be developed. This review focuses on recent results addressing the adsorption of PFAS on activated carbons (AC) and metal-organic frameworks (MOF). While the former are well-established adsorbents used in water treatment, the latter are relatively new and still not applied at a large scale. Nevertheless, they attract research interests owing to their developed porosity and versatile surface chemistry. While AC provide high volumes of pores and hydrophobic surfaces to strongly attract fluorinated chains, MOF supply sites for acid-base complexation and a variety of specific interactions. The modifications of AC are focused on the introduction of basicity to attract PFAS anions via electrostatic/chemical interactions, and those of MOF - on structural defects to increase the pore sizes. Based on the comparison of the performance and specifically adsorption forces provided by these two groups of materials, activated carbons were pointed out as worthy of further research efforts. This is because their surface, especially that in large pores, where dispersive forces are week and where extensive pore space might be utilized to adsorb more PFAS, can be further chemically modified and these modifications might be informed by the mechanisms of PFAS adsorption, which are specific for MOF. This review emphasizes the effects of these modifications on the adsorption mechanism and brings the critical assessment of the advantages/disadvantages of both groups as PFAS adsorbents.

Perfluorooctanoic acid exposure in early pregnancy induces oxidative stress in mice uterus and liver

This study aimed to explore the mechanism of perfluorooctanoic acid (PFOA) toxicity on the uterus and liver of mice during early pregnancy. Pregnant mice were given 0, 1, 5, 10, 20, and 40 mg/kg PFOA daily by gavage from gestational day (GD) 1-7 and sacrificed on GD 9. Subsequently, several toxicity parameters were evaluated, including the uterus and liver weights, liver and uterine indexes, histopathological changes of the liver and uterus, and levels of malondialdehyde (MDA), superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px) in the liver. We also determined the expressions of FAS, FASL, Bax, Bcl-2, and Caspase-3 in decidual cells by immunohistochemistry and the TUNEL assay to detect apoptosis uterine cells. The results showed that PFOA increased the liver weights and reduced the uterus index in a dose-dependent manner. With increasing doses of PFOA, the levels of SOD and GSH-Px were significantly decreased, and MDA increased substantially in liver tissue. 20 mg/kg and 40 mg/kg of PFOA caused more substantial harm to the uterus, thus a higher probability for congestion and resorption. The expression of FAS, FASL, Bax, and Caspase-3 in decidual cells of the uterus in the PFOA treatment groups significantly increased in a dose-dependent manner. The expression of Bcl-2 was downregulated, decreasing the Bcl-2/Bax ratio. At gestation day 9, the control group had significantly fewer apoptotic cells in the uterus and shallower staining than the 40 mg/kg PFOA group. The findings of this study suggest that oxidative damage may be one of the mechanisms by which PFOA induces liver toxicity, and a subsequent increase in uterine cell apoptosis may cause embryo loss or damage.

Per- and poly-fluoroalkyl substance remediation from soil and sorbents: A review of adsorption behaviour and ultrasonic treatment

Per- and poly-fluoroalkyl substances (PFAS) are xenobiotics, present at variable concentrations in soils and groundwater worldwide. Some of the current remediation techniques being researched or applied for PFAS-impacted soils involve solidification-stabilisation, soil washing, excavation and disposal to landfill, on site or in situ smouldering, thermal desorption, ball milling and incineration. Given the large volumes of soil requiring treatment, there is a need for a more environmentally friendly technique to remove and treat PFASs from soils. Sorbents such as granular/powdered activated carbon, ion exchange resins and silicas are used in water treatment to remove PFAS. In this work, PFAS adsorption mechanisms and the effect of pore size, pH and organic matter on adsorption efficacy are discussed. Then, adsorption of PFAS to soils and sorbents is considered when assessing the viability of remediation techniques. Sonication-aided treatment was predicted to be an effective removal technique for PFAS from a solid phase, and the effect of varying frequency, power and particle size on the effectiveness of the desorption process is discussed. Causes and mitigation strategies for possible cavitation-induced particle erosion during ultrasound washing are also identified. Following soil remediation, degrading the extracted PFAS using sonolysis in a water-organic solvent mixture is discussed. The implications for future soil remediation and sorbent regeneration based on the findings in this study are given.

Thermal Regeneration of Spent Granular Activated Carbon Presents an Opportunity to Break the Forever PFAS Cycle

Extensive use of per- and polyfluoroalkyl substances (PFAS) has caused their ubiquitous presence in natural waters. One of the standard practices for PFAS removal from water is adsorption onto granular activated carbon (GAC); however, this approach generates a new waste stream, i.e., PFAS-laden GAC. Considering the recalcitrance of PFAS molecules in the environment, inadequate disposal (e.g., landfill or incineration) of PFAS-laden GAC may let PFAS back into the aquatic cycle. Therefore, developing approaches for PFAS-laden GAC management present unique opportunities to break its forever circulation within the aqueous environment. This comprehensive review evaluates the past two decades of research on conventional thermal regeneration of GAC and critically analyzes and summarizes the literature on regeneration of PFAS-laden GACs. Optimized thermal regeneration of PFAS-laden GACs may provide an opportunity to employ existing regeneration infrastructure to mineralize the adsorbed PFAS and recover the spent GAC. The specific objectives of this review are (i) to investigate the role of physicochemical properties of PFAS on thermal regeneration, (ii) to assess the changes in regeneration yield as well as GAC physical and chemical structure upon thermal regeneration, and (iii) to critically discuss regeneration parameters controlling the process. This literature review on the engineered regeneration process illustrates the significant promise of this approach that can break the endless environmental cycle of these forever chemicals, while preserving the desired physicochemical properties of the valuable GAC adsorbent.