E-waste management and its effects on the environment and human health

Rural revival: Navigating environmental engineering and technology

The necessity for global engineering and technological solutions to address rural environmental challenges is paramount, particularly in improving rural waste treatment and infrastructure. This study presents a comprehensive quantitative analysis of 3901 SCI/SSCI and 3818 Chinese CSCD papers, spanning from 1989 to 2021, using tools like Derwent Data Analyzer and VOSviewer. Our key findings reveal a significant evolution in research focus, including a 716.67% increase in global publications from 1995 to 2008 and a 154.76% surge from 2015 to 2021, highlighting a growing research interest with technological hotspots in rural revitalization engineering and agricultural waste recycling. China and the USA are pivotal, contributing 784 and 714 publications respectively. Prominent institutions such as the Chinese Academy of Sciences play a crucial role, particularly in fecal waste treatment technology. These insights advocate for enhanced policy development and practical implementations to foster inclusive and sustainable rural environments globally.

HBM4EU E-waste study: Assessing persistent organic pollutants in blood, silicone wristbands, and settled dust among E-waste recycling workers in Europe

E-waste recycling is an increasingly important activity that contributes to reducing the burden of end-of-life electronic and electrical apparatus and allows for the EU's transition to a circular economy. This study investigated the exposure levels of selected persistent organic pollutants (POPs) in workers from e-waste recycling facilities across Europe. The concentrations of seven polychlorinated biphenyls (PCBs) and eight polybrominated diphenyl ethers (PBDEs) congeners were measured by GC-MS. Workers were categorized into five groups based on the type of e-waste handled and two control groups. Generalized linear models were used to assess the determinants of exposure levels among workers. POPs levels were also assessed in dust and silicone wristbands (SWB) and compared with serum. Four PCB congeners (CB 118, 138, 153, and 180) were frequently detected in serum regardless of worker's category. With the exception of CB 118, all tested PCBs were significantly higher in workers compared to the control group. Controls working in the same company as occupationally exposed (Within control group), also displayed higher levels of serum CB 180 than non-industrial controls with no known exposures to these chemicals (Outwith controls) (p < 0.05). BDE 209 was the most prevalent POP in settled dust (16 μg/g) and SWB (220 ng/WB). Spearman correlation revealed moderate to strong positive correlations between SWB and dust. Increased age and the number of years smoked cigarettes were key determinants for workers exposure. Estimated daily intake through dust ingestion revealed that ΣPCB was higher for both the 50th (0.03 ng/kg bw/day) and 95th (0.09 ng/kg bw/day) percentile exposure scenarios compared to values reported for the general population. This study is one of the first to address the occupational exposure to PCBs and PBDEs in Europe among e-waste workers through biomonitoring combined with analysis of settled dust and SWB. Our findings suggest that e-waste workers may face elevated PCB exposure and that appropriate exposure assessments are needed to establish effective mitigation strategies.

The relevance of sustainable laboratory practices

Scientists are of key importance to the society to advocate awareness of the climate crisis and its underlying scientific evidence and provide solutions for a sustainable future. As much as scientific research has led to great achievements and benefits, traditional laboratory practices come with unintended environmental consequences. Scientists, while providing solutions to climate problems and educating the young innovators of the future, are also part of the problem: excessive energy consumption, (hazardous) waste generation, and resource depletion. Through their own research operations, science, research and laboratories have a significant carbon footprint and contribute to the climate crisis. Climate change requires a rapid response across all sectors of society, modeled by inspiring leaders. A broader scientific community that takes concrete actions would serve as an important step in convincing the general public of similar actions. Over the past years, grassroots movements across the sciences have recognized the overlooked impact of the scientific enterprise, and so-called Green Lab initiatives emerged seeking to address the environmental footprint of research. Driven by the voluntary efforts of researchers and staff, they educate peers, develop sustainability guidelines, write scientific publications and maintain accreditation frameworks. With this perspective we want to advocate for and spark leadership to promote a systemic change in laboratory practices and approach to research. Comprehensive evidence for the environmental impact of laboratories and their root-causes is presented, expanded with data from a current case study of the University of Groningen showcasing annual savings of 398 763 € as well as 477.1 tons of CO2e. This is followed by guidelines for sustainable lab practices and hands-on advice on how to achieve a systemic change at research institutions and industry. How can we expect industry, politics, and society to change, if we as scientists are not changing either? Scientists should lead by example and practice the change they want to see.

An in-depth analysis and review of management strategies for E-waste in the south Asian region: A way forward towards waste to energy conversion and sustainability

The soaring rise of electronic and electrical waste (E-waste) leads to significant challenges to the South Asian region, urging for incorporating comprehensive assessment and management strategies. The research dives into the intricacies of E-waste and examines how regulatory barriers, public ignorance, and the limited lifespan of electronic devices all contribute to the significant production of E-waste. This study emphasizes the vital need for ongoing and appropriate management practices by bringing attention to the short lifespan of electronic devices and the resulting generation of E-waste. This work also addresses the increased risks that people who live close to informal recycling sites for electronic waste face, as well as the dangerous substances that are found in them and how they harm the environment and human health. Furthermore, in order to promote circular economies and increase productivity, the study assesses management practices in both developed and developing nations, placing special emphasis on component reuse and recycling. Along with addressing the grave consequences of the illicit E-waste trade on the environment, particularly in developing nations, this review attempts to enlighten stakeholders and policymakers about the vital need for coordinated efforts to address the issues related to E-waste in the South Asian region by offering insights into E-waste assessment and management techniques.

Quantitative identification of the co-exposure effects of e-waste pollutants on human oxidative stress by explainable machine learning

Global electronic waste (e-waste) generation continues to grow. The various pollutants released during precarious e-waste disposal activities can contribute to human oxidative stress. This study encompassed 129 individuals residing near e-waste dismantling sites in China, with elevated urinary concentrations of e-waste-related pollutants including heavy metals, polycyclic aromatic hydrocarbons (PAHs), organophosphorus flame retardants (OPFRs), bisphenols (BPs), and phthalate esters (PAEs). Utilizing an explainable machine learning framework, the study quantified the co-exposure effects of these pollutants, finding that approximately 23% and 18% of the variance in oxidative DNA damage and lipid peroxidation, respectively, was attributable to these substances. Heavy metals emerged as the most critical factor in inducing oxidative stress, followed by PAHs and PAEs for oxidative DNA damage, and BPs, OPFRs, and PAEs for lipid peroxidation. The interactions between different pollutant classes were found to be weak, attributable to their disparate biological pathways. In contrast, the interactions among congeneric pollutants were strong, stemming from their shared pathways and resultant synergistic or additive effects on oxidative stress. An intelligent analysis system for e-waste pollutants was also developed, which enables more efficient processing of large-scale and dynamic datasets in evolving environments. This study offered an enticing peek into the intricacies of co-exposure effect of e-waste pollutants.

Recovery of non-metallic useable materials from e-waste

Tremendous amounts of electric and electronic wastes (e-waste) are generated daily, and their indiscriminate disposal may cause serious environmental pollution. The recovery of non-metallic materials from e-waste is a strategy to not only reduce the volume of e-waste but also avoid pollutant emissions produced by indiscriminate disposal of e-waste. Pyrolysis, sub/supercritical water treatment, chemical dissolution, and physical treatment (e.g., ball milling, flotation, and electrostatic separation) are available methods to recover useable non-metallic materials (e.g., resins, fibers, and various kinds of polymers) from e-waste. The e-waste-derived materials can be used to manufacture a large variety of industrial and consumer products. In this regard, this work attempts to compile relevant knowledge on the technologies that derive utilizable materials from different classes of e-waste. Moreover, this work highlights the potential of the e-waste-derived materials for various applications. Current challenges and perspectives on e-waste upcycling to useable materials are also discussed.

Assessing Neurobehavioral Alterations Among E-waste Recycling Workers in Hong Kong

Background

E-waste workers in Hong Kong are handling an unprecedented amount of e-waste, which contains various neurotoxic chemicals. However, no study has been conducted to evaluate the neurological health status of e-waste workers in Hong Kong. This study aimed to evaluate the prevalence of neurobehavioral alterations and to identify the vulnerable groups among Hong Kong e-waste workers.

Methods

We recruited 109 Hong Kong e-waste workers from June 2021 to September 2022. Participants completed standard questionnaires and wore a GENEActiv accelerometer for seven days. Pittsburgh Sleep Quality Index and Questionnaire 16/18 (Q16/18) were used to assess subjective neurobehavioral alterations. The GENEActiv data generated objective sleep and circadian rhythm variables. Workers were grouped based on job designation and entity type according to the presumed hazardous level. Unconditional logistic regression models measured the associations of occupational characteristics with neurobehavioral alterations after adjusting for confounders.

Results

While dismantlers/repairers and the workers in entities not funded by the government were more likely to suffer from neurotoxic symptoms in Q18 (adjusted odds ratio: 3.18 [1.18-9.39] and 2.77 [1.10-7.46], respectively), the workers from self-sustained recycling facilities also have poor performances in circadian rhythm. Results also showed that the dismantlers/repairers working in entities not funded by the government had the highest risk of neurotoxic symptoms compared to the lowest-risk group (i.e., workers in government-funded companies with other job designations).

Conclusion

This timely and valuable study emphasizes the importance of improving the working conditions for high-risk e-waste workers, especially the dismantlers or repairers working in facilities not funded by the government.

In vivo exposure to electronic waste (e-waste) leachate and hydraulic fracturing fluid adversely impacts the male reproductive system

Human health effects can arise from unregulated manual disassembly of electronic waste (e-waste) and/or hydraulic fracturing fluid spills. There is limited literature on the effects of e-waste and hydraulic fracturing wastewater exposure on the male reproductive system. Thus, this proof-of-concept study begins to address the question of how wastewater from two potentially hazardous environmental processes could affect sperm quality. Therefore, three groups of eight-week-old adult mice were exposed (5 d/wk for 6 wks) via a mealworm (Tenebrio molitor and Zophabas morio) feeding route to either: (1) e-waste leachate (50% dilution) from the Alaba Market (Lagos, Nigeria); (2) West Virginia hydraulic fracturing flowback (HFF) fluid (50% dilution); or, (3) deionized water (control). At 24-hours (hr), 3 weeks (wk), or 9-wk following the 6-wk exposure period, cohorts of mice were necropsied and adverse effects/persistence on the male reproductive system were examined. Ingestion of e-waste leachate or HFF fluid decreased number and concentration of sperm and increased both chromatin damage and numbers of morphological abnormalities in the sperm when compared to control mice. Levels of serum testosterone were reduced post-exposure (3- and 9-wk) in mice exposed to e-waste leachate and HFF when compared to time-matched controls, indicating the long-term persistence of adverse effects, well after the end of exposure. These data suggest that men living around or working in vicinity of either e-waste or hydraulic fracturing could face harmful effects to their reproductive health. From both a human health and economic standpoint, development of prevention and intervention strategies that are culturally relevant and economically sensitive are critically needed to reduce exposure to e-waste and HFF-associated toxic contaminants.

Sustainability in Membrane Technology: Membrane Recycling and Fabrication Using Recycled Waste

Membrane technology has shown a promising role in combating water scarcity, a globally faced challenge. However, the disposal of end-of-life membrane modules is problematic as the current practices include incineration and landfills as their final fate. In addition, the increase in population and lifestyle advancement have significantly enhanced waste generation, thus overwhelming landfills and exacerbating environmental repercussions and resource scarcity. These practices are neither economically nor environmentally sustainable. Recycling membranes and utilizing recycled material for their manufacturing is seen as a potential approach to address the aforementioned challenges. Depending on physiochemical conditions, the end-of-life membrane could be reutilized for similar, upgraded, and downgraded operations, thus extending the membrane lifespan while mitigating the environmental impact that occurred due to their disposal and new membrane preparation for similar purposes. Likewise, using recycled waste such as polystyrene, polyethylene terephthalate, polyvinyl chloride, tire rubber, keratin, and cellulose and their derivates for fabricating the membranes can significantly enhance environmental sustainability. This study advocates for and supports the integration of sustainability concepts into membrane technology by presenting the research carried out in this area and rigorously assessing the achieved progress. The membranes' recycling and their fabrication utilizing recycled waste materials are of special interest in this work. Furthermore, this study offers guidance for future research endeavors aimed at promoting environmental sustainability.

Driving sustainable circular economy in electronics: A comprehensive review on environmental life cycle assessment of e-waste recycling

E-waste, encompassing discarded materials from outdated electronic equipment, often ends up intermixed with municipal solid waste, leading to improper disposal through burial and incineration. This improper handling releases hazardous substances into water, soil, and air, posing significant risks to ecosystems and human health, ultimately entering the food chain and water supply. Formal e-waste recycling, guided by circular economy models and zero-discharge principles, offers potential solutions to this critical challenge. However, implementing a circular economy for e-waste management due to chemical and energy consumption may cause environmental impacts. Consequently, advanced sustainability assessment tools, such as Life Cycle Assessment (LCA), have been applied to investigate e-waste management strategies. While LCA is a standardized methodology, researchers have employed various routes for environmental assessment of different e-waste management methods. However, to the authors' knowledge, there lacks a comprehensive study focusing on LCA studies to discern the opportunities and limitations of this method in formal e-waste management strategies. Hence, this review aims to survey the existing literature on the LCA of e-waste management under a circular economy, shedding light on the current state of research, identifying research gaps, and proposing future research directions. It first explains various methods of managing e-waste in the circular economy. This review then evaluates and scrutinizes the LCA approach in implementing the circular bioeconomy for e-waste management. Finally, it proposes frameworks and procedures to enhance the applicability of the LCA method to future e-waste management research. The literature on the LCA of e-waste management reveals a wide variation in implementing LCA in formal e-waste management, resulting in diverse results and findings in this field. This paper underscores that LCA can pinpoint the environmental hotspots for various pathways of formal e-waste recycling, particularly focusing on metals. It can help address these concerns and achieve greater sustainability in e-waste recycling, especially in pyrometallurgical and hydrometallurgical pathways. The recovery of high-value metals is more environmentally justified compared to other metals. However, biometallurgical pathways remain limited in terms of environmental studies. Despite the potential for recycling e-waste into plastic or glass, there is a dearth of robust background in LCA studies within this sector. This review concludes that LCA can offer valuable insights for decision-making and policy processes on e-waste management, promoting environmentally sound e-waste recycling practices. However, the accuracy of LCA results in e-waste recycling, owing to data requirements, subjectivity, impact category weighting, and other factors, remains debatable, emphasizing the need for more uncertainty analysis in this field.

Assessment of legacy and alternative halogenated organic pollutants in outdoor dust and soil from e-waste sites in Nigeria: Concentrations, patterns, and implications for human exposure

E-waste is often processed informally, particularly in developing countries, resulting in the release of harmful chemicals into the environment. This study investigated the co-occurrence of selected persistent organic pollutants (POPs), including legacy and alternative halogenated flame retardants (10 polybrominated diphenyl ethers (PBDEs), decabromodiphenyl ethane (DBDPE), syn and anti-dechlorane plus (DP)), 32 polychlorinated biphenyls (PCBs) and 12 organochlorine pesticides (OCPs), in 20 outdoor dust and 49 soil samples from 7 e-waste sites in Nigeria. This study provides the first report on alternative flame retardants (DBDPE and DP) in Nigeria. The total concentration range of the selected classes of compounds was in the order: ∑10PBDEs (44-12300 ng/g) > DBDPE (4.9-3032 ng/g) > ∑2DP (0.7-278 ng/g) > ∑32PCBs (4.9-148 ng/g) > ∑12OCPs (1.9-25 ng/g) for dust, and DBDPE (4.9-9647 ng/g) > ∑10PBDEs (90.3-7548 ng/g) > ∑32PCBs (6.1-5025 ng/g) > ∑12OCPs (1.9-250 ng/g) > ∑2DP (2.1-142 ng/g) for soil. PBDEs were the major contributors to POP pollution at e-waste dismantling sites, while PCBs were the most significant contributors at e-waste dumpsites. DBDPE was found to be significantly associated with pollution at both e-waste dismantling and dumpsites. Estimated daily intake (EDI) via dust and soil ingestion and dermal adsorption routes ranged from 1.3 to 2.8 ng/kg bw/day and 0.2-2.9 ng/kg bw/day, respectively. In the worst-case scenario, EDI ranged from 2.9 to 10 ng/kg bw/day and 0.8-5.8 ng/kg bw/day for dust and soil, respectively. The obtained intake levels posed no non-carcinogenic risk, but could increase the incidence of cancer at some of the studied e-waste sites, with values exceeding the USEPA cancer risk lower limit (1.0 × 10-6). Overall, our results suggest that e-waste sites act as emission point sources of POPs.

Challenges to implement and operationalize the WEEE reverse logistics system at the micro level

Waste electrical and electronic equipment (WEEE) possesses unique characteristics such as its growing production and the potential for resource extraction due to its composition. The implementation and operationalization of a reverse logistics system (RLS) for WEEE is a challenge, particularly concerning the micro level. The implementation of such systems often prioritizes urban centers and their higher population densities, generally overlooking the micro level. The latter refers to ward- or village-level divisions, which can be regarded as the smallest administrative divisions of both urban and rural areas. Furthermore, it encompasses any area facing logistical challenges regarding RLS operationalization due to factors such as geographical isolation, budgetary constraints, imbalances, social isolation, environmental aspects, and even geopolitical conflicts. This study is aimed at addressing this literature gap by discussing the challenges to implement and operationalize a WEEE RLS at the micro level. A systematic literature review was employed as our methodology. We found 13 challenges for developed and developing countries without distinction between macro and micro levels. An additional approach highlighted the significance of monitoring and controlling WEEE RLS. The challenge The population and LRS entities' lack or insufficient training and awareness received the most citations in the conducted search. These challenges were organized by operational phase and discussed from the perspective of the micro level to comprehend multifactorial local challenges involving all stakeholders in the reverse logistics of WEEE in emerging nations. This can assist local administrators and constitutes the primary contribution of this study.

Digital Health Technologies in Clinical Trials: An Ontology-Driven Analysis to Inform Digital Sustainability Policies

BACKGROUND

Digital health technologies (DHTs) can facilitate the execution of de-centralized trials that can offer opportunities to reduce the burden on participants, collect outcome data in a real-world setting, and potentially make trial populations more diverse and inclusive. However, DHTs can also be a significant source of electronic waste (e-waste). In recognition of the potential health and environmental impact from DHT use in trials, private and public institutions have recently launched initiatives to help measure and manage this e-waste. But in order to develop sound e-waste management policies, it will be necessary to first estimate the current volume of e-waste that results from the use of DHTs in trials.

MATERIALS AND METHODS

A Web Ontology Language (OWL)-compliant ontology of DHTs was created using a list of 500 DHT device names derived from a mixture of public and private sources. The U.S. clinical trials registry, ClinicalTrials.gov, was then queried to identify and classify trials using any of the devices in the ontology. The ClinicalTrials.gov records from this search were then analyzed to characterize the volume and properties of trials using DHTs, as well as estimating the total volume of individual DHT units that have been provisioned (or are planned to be provisioned) for clinical research.

RESULTS

Our ontology-driven search identified 2326 unique clinical trials with a reported "actual" enrollment of 200,947 participants and a "planned" enrollment of an additional 4,094,748 participants. The most-used class of DHTs in our ontology was "wearables," (1852 trials), largely driven by the use of smart watches and other wrist-worn sensors (estimated to involve 149,391 provisioned devices). The most-used subtype of DHTs in trials was "subcutaneous" devices (367 trials), driven by the prevalent use and testing of glucose monitors (estimated to involve 17,666 provisioned devices).

CONCLUSION

Thousands of trials, involving hundreds of thousands of devices, have already been completed, and many more trials (potentially involving millions more devices) are planned. Despite the great opportunities that are afforded by DHTs to the clinical trial enterprise, if the industry lacks the ability to track DHT use with sufficient resolution, the result is likely to be a great deal of e-waste. A new ontology of DHTs, combined with rigorous data science methods like those described in this paper, can be used to provide better information across the industry, and in turn, help create a more sustainable and equitable clinical trials enterprise.

Cadmium exposure promotes ferroptosis by upregulating Heat Shock Protein 70 in vascular endothelial damage of zebrafish

Cadmium (Cd) exposure is a risk factor for endothelial dysfunction and cardiovascular disease. Ferroptosis is a type of cell death that relies on lipid peroxidation. Whether ferroptosis acts in Cd-induced vascular endothelial damage and the underlying mechanisms remain unclear. Herein, we found that Cd resulted in ferroptosis of vascular endothelial cells (ECs) in vivo and in vitro. In the visualized zebrafish embryos, Cd accumulated in vascular ECs, ROS and lipid peroxidation levels were increased, and the oxidoreductase system was disturbed after exposure. Moreover, Cd decreased Gpx4 in ECs and caused smaller mitochondria with increased membrane density. Accompanied by ferroptosis, the number of ECs and the area of the caudal venous plexus in zebrafish embryos were reduced, and the survival rate of HUVECs decreased. These effects were partially reversed by ferrostatin-1 and aggravated by erastin. Mechanistically, an excessive increase in Heat Shock Protein 70 (Hsp70) was identified by transcriptomics after Cd exposure. Inhibition of Hsp70 by VER-155008 or siRNA ameliorated Cd-induced ferroptosis, thereby alleviating endothelial injury. Furthermore, Hsp70 regulated Cd-induced ferroptosis by targeting multiple targets, including Gpx4, Fth1, Nrf2 and Acsl4. Our findings provide a new approach to investigating the endothelial damage of Cd and indicate that regulation of Hsp70 is an important target for alleviating this process.

Chlorinated Paraffin Pollution in the Marine Environment

Chlorinated paraffins (CPs) are ubiquitous in the environment due to their large-scale usage, persistence, and long-range atmospheric transport. The oceans are a critical environment where CPs transformation occurs. However, the broad impacts of CPs on the marine environment remain unclear. This review describes the sources, occurrence and transport pathways, environmental processes, and ecological effects of CPs in the marine environment. CPs are distributed in the global marine environment by riverine input, ocean currents, and long-range atmospheric transport from industrial areas. Environmental processes, such as the deposition of particle-bound compounds, leaching of plastics, and microbial degradation of CPs, are the critical drivers for regulating CPs' fate in water columns or sediment. Bioaccumulation and trophic transfer of CPs in marine food webs may threaten marine ecosystem functions. To elucidate the biogeochemical processes and environmental impacts of CPs in marine environments, future work should clarify the burden and transformation process of CPs and reveal their ecological effects. The results would help readers clarify the current research status and future research directions of CPs in the marine environment and provide the scientific basis and theoretical foundations for the government to assess marine ecological risks of CPs and to make policies for pollution prevention and control.

Synchrotron science for sustainability: life cycle of metals in the environment

The movement of metals through the environment links together a wide range of scientific fields: from earth sciences and geology as weathering releases minerals; to environmental sciences as metals are mobilized and transformed, cycling through soil and water; to biology as living things take up metals from their surroundings. Studies of these fundamental processes all require quantitative analysis of metal concentrations, locations, and chemical states. Synchrotron X-ray tools can address these requirements with high sensitivity, high spatial resolution, and minimal sample preparation. This perspective describes the state of fundamental scientific questions in the lifecycle of metals, from rocks to ecosystems, from soils to plants, and from environment to animals. Key X-ray capabilities and facility infrastructure for future synchrotron-based analytical resources serving these areas are summarized, and potential opportunities for future experiments are explored.

Towards a sustainable and green approach of electrical and electronic waste management in Rwanda: a critical review

Electric and electronic equipment (EEE) consumption has grown to worrisome proportions in developing countries (DC_S), resulting in massive amounts of electrical and electronic waste (e-waste) being produced. A diagnosis of e-waste proliferation is required for its sustainable management plan in Rwanda. This review is based on open-access papers with e-waste as a keyword, the present situation of EEE, and e-waste in Rwanda. The need for various information communication and technology (ICT) tools, such as end-user devices, cooling-system devices, network equipment, and telecommunication devices, is strongly encouraged by Rwandan national plans, which deem ICT as a vital enabler of knowledge-based economy and development. In 2014, EEE was 33,449 tonnes (t), which is expected to be 267,741 t in 2050, with a yearly increase rate of 5.95%. In this regard, out-of-date EEE is being dumped as e-waste in large quantities and at an increasing rate across Rwanda. E-waste is often disposed of in uncontrolled landfills together with other types of household waste. To address this rising threat, as well as to preserve the environment and human health, proper e-waste management involving e-waste sorting/separation from other waste streams, repairs, reuse, recycling, remanufacturing, and disposal has been proposed.

Concepts of circular economy for sustainable management of electronic wastes: challenges and management options

The electronic and electrical industrial sector is exponentially growing throughout the globe, and sometimes, these wastes are being disposed of and discarded with a faster rate in comparison to the past era due to technology advancements. As the application of electronic devices is increasing due to the digitalization of the world (IT sector, medical, domestic, etc.), a heap of discarded e-waste is also being generated. Per-capita e-waste generation is very high in developed countries as compared to developing countries. Expansion of the global population and advancement of technologies are mainly responsible to increase the e-waste volume in our surroundings. E-waste is responsible for environmental threats as it may contain dangerous and toxic substances like metals which may have harmful effects on the biodiversity and environment. Furthermore, the life span and types of e-waste determine their harmful effects on nature, and unscientific practices of their disposal may elevate the level of threats as observed in most developing countries like India, Nigeria, Pakistan, and China. In the present review paper, many possible approaches have been discussed for effective e-waste management, such as recycling, recovery of precious metals, adopting the concepts of circular economy, formulating relevant policies, and use of advance computational techniques. On the other hand, it may also provide potential secondary resources valuable/critical materials whose primary sources are at significant supply risk. Furthermore, the use of machine learning approaches can also be useful in the monitoring and treatment/processing of e-wastes. HIGHLIGHTS: In 2019, ~ 53.6 million tons of e-wastes generated worldwide. Discarded e-wastes may be hazardous in nature due to presence of heavy metal compositions. Precious metals like gold, silver, and copper can also be procured from e-wastes. Advance tools like artificial intelligence/machine learning can be useful in the management of e-wastes.

An overview of wastewater treatment using combined heterogeneous photocatalysis and membrane distillation

The need for efficient remediation solutions to wastewater has risen due to the concerning prevalence of toxic organic pollutants. It is possible for the linked photocatalysis-membrane separation system to concurrently achieve the photoreaction of pollutants and their removal from wastewater in order to accomplish the goal of completely purifying the wastewater. This investigation's objective is to provide analytical overview of the photocatalytic and membrane coupling process, photocatalytic membrane reactors, and the potential applications of these technologies in the treatment of wastewater for the persistent organic matter removal. In the review, an examination of photocatalytic and membrane processes to remove organic compounds from wastewater is presented. Based on the literature analysis, it was observed that the application of photocatalytic membrane reactors is significantly influenced by a wide variety of factors. Some of these factors include pollutant concentration, dissolved oxygen, aeration, pH, and hydraulic retention time. Light intensity is another factor that has a significant influence. It was also revealed how distillation membranes work when integrated with photocatalytic process. This brief overview will help researchers understand how successful coupled photocatalytic and membrane distillation are in the treatment of wastewater containing organic pollutants.

Prediction of the Endocrine disruption profile of fluorinated biphenyls and analogues: An in silico study

Fluorinated biphenyls and their analogues (FBAs) are considered new persistent organic pollutants, but their endocrine-disrupting effects are still unknown. To fill this gap, the binding probability of 44 FBAs to different nuclear hormone receptors (NHRs) was predicted using Endocrine Disruptome. And molecular similarity and network toxicology analysis were used to strengthen the docking screening. The docking results showed that FBAs could have high binding potential for various NHRs, such as estrogen receptors β antagonism (ERβ an), liver X receptors α (LXRα), estrogen receptors α (ERα), and liver X receptors β (LXRβ). The similarity analysis found that the degree of overlap of the NHR repertoire was related to the Tanimoto coefficient of FBAs. Network toxicology verified a part of docking screening results and identified endocrine-disrupting pathways worthy of attention. This study found out potential endocrine-disrupting FBAs and their vulnerable, and developed a workflow that would leverage in silico approaches including molecular docking, similarity, and network toxicology for risk prioritization of potential endocrine-disrupting compounds.

E-waste recycled materials as efficient catalysts for renewable energy technologies and better environmental sustainability

Waste from electrical and electronic equipment exponentially increased due to the innovation and the ever-increasing demand for electronic products in our life. The quantities of electronic waste (e-waste) produced are expected to reach 44.4 million metric tons over the next five years. Consequently, the global market for electronics recycling is expected to reach $65.8 billion by 2026. However, electronic waste management in developing countries is not appropriately handled, as only 17.4% has been collected and recycled. The inadequate electronic waste treatment causes significant environmental and health issues and a systematic depletion of natural resources in secondary material recycling and extracting valuable materials. Electronic waste contains numerous valuable materials that can be recovered and reused to create renewable energy technologies to overcome the shortage of raw materials and the adverse effects of using non-renewable energy resources. Several approaches were devoted to mitigate the impact of climate change. The cooperate social responsibilities supported integrating informal collection and recycling agencies into a well-structured management program. Moreover, the emission reductions resulting from recycling and proper management systems significantly impact climate change solutions. This emission reduction will create a channel in carbon market mechanisms by trading the CO2 emission reductions. This review provides an up-to-date overview and discussion of the different categories of electronic waste, the recycling methods, and the use of high recycled value-added (HAV) materials from various e-waste components in green renewable energy technologies.

E-waste management, treatment options and the impact of heavy metal extraction from e-waste on human health: Scenario in Vietnam and other countries

Ho Chi Minh (HCM) City is the most important urban region of Vietnam, Southeast Asia. In recent times, the quantity of electronic waste (e-waste) has been growing by several thousand tonnes every year. In this research, some of the existing and developing technologies being employed for the recycling of e-waste have been reviewed. Accordingly, the paper has been divided into three sections namely, e-waste treatment technologies in Ho Chi Minh City, the effect of heavy metals on human health and the extraction of metals from e-waste using pyrolysis, hydrometallurgy, bioleaching, mechanical, and air classifier methods, respectively. The extraction of precious metals and heavy metals such as Cd, Cr, Pb, Hg, Cu, Se, and Zn from e-waste can be hazardous to human health. For example, lead causes hazards to the central and peripheral nervous systems, blood system and kidneys; copper causes liver damage; chronic exposure to cadmium ends up causing lung cancer and kidney damage, and mercury can cause brain damage. Thus, this study examines the key findings of many research and review articles published in the field of e-waste management and the health impacts of metal pollution.

A systematic review of the health effects of lead exposure from electronic waste in children

Introduction

Electronic waste (e-waste) is an emerging human and environmental problem. Lead (Pb) is one of the most dangerous chemicals for human health, and it is the most prevalent heavy metal pollutant in e-waste. Despite the rapid growth of e-waste globally and the health effects of Pb, there is little information regarding the effects of Pb exposure from e-waste on children. Therefore, the aim of this review was to provide concise information on the health effects of Pb exposure from e-waste on children.

Methods

A comprehensive search of databases was undertaken using PubMed/MEDLINE, Cochrane Library, Science Direct, HINARI, African Journal Online (AJOL), and additional sources were searched up to November 25, 2022. Eligibility criteria were determined using Population, Exposure, Comparator, and Outcome (PECO). The guidelines for Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) were used during the article selection process. The protocol of this systematic review was registered in the International Prospective Register of Systematic Reviews (Registration ID: CRD42022377028). The Joanna Briggs Institute (JBI) quality appraisal checklist was used to assess the quality of the included studies.

Results

From a total of 1,150 identified studies, 20 full-text studies were included in the systematic review. All most included studies were conducted in China recycling area for e-waste. The included studies were conducted with an exposed group versus a reference group. The majority of the included studies found that blood Pb levels were ≥5 μg/dl and that Pb exposures from e-waste were affecting children's health, such as a decrease in serum cortisol levels, inhibition of hemoglobin synthesis, impact on neurobehavioral development, affect physical development, etc.

Conclusion

Lead exposure had a significant impact on children's health as a result of informal e-waste recycling. Therefore, formalizing the informal sector and raising public health awareness are important steps toward reducing Pb exposure from e-waste. Moreover, the concerned stakeholders, like national and international organizations, should work together to effectively manage e-waste.

Extended producer responsibility in developing economies: Assessment of promoting factors through retail electronic firms for sustainable e-waste management

The adoption of the extended producers' responsibility (EPR) principle as a mitigation strategy for e-waste management has gained impetus over the past few years. However, e-waste management in developing economies through retail electronic firms' or producer responsibility organization is still inceptive. This study identified and analysed promoting factors of EPR principle adoption through retail electronic firms in the Ghanaian electronic industry. Through extant literature and stakeholders' perspectives, 15 factors were identified as strategic and operational promoting factors, which were evaluated by experts. Subsequently, the grey Decision-Making Trial and Evaluation Laboratory technique was used to analyse the data obtained. The outcome of the study suggests that operational factors have more influence than strategic factors to determine the adoption of the EPR principle. In addition, most of the important operational factors tend to be enabled by both push and pull measures by supply chain stakeholders. In the short term, adopting an advanced deposit recycling refund scheme tends to be the most effective elementary operational factor, which can push retailers to adopt the EPR principle. The significant pull elementary factors that need short-term attention include the opening up and creation of new market opportunities for e-companies as well as resilient and effective resources management. The study findings suggest that Ghana's present policy framework is limited for the adoption of the EPR principle by retail electronic firms. The study contributes to identifying promoting factors for adoption of the EPR principle from the perspectives of both the external and internal stakeholders in the electronic industry with emphasis on push and pull strategy.

Electronic waste control and management in Ghana: A critical assessment of the law, perceptions and practices

The aim of the study was to assess the impact of Ghana's hazardous and e-waste control and management Act 917 of 2016 on current e-waste management practices and the level of awareness among key stakeholders (general public, repairers, wholesalers/retailers, recyclers and importers of electronic items) in the Greater Accra Region of Ghana. Both quantitative and qualitative data were collected and examined in this study. Results showed a low level (12%) of awareness among stakeholders on the e-waste legislation. Almost 13% of respondents had been educated on e-waste management. Community engagement and the mass media were the main sources of information on e-waste. Significant associations between background information of respondents and awareness level on 'Ghana's Act 917' were observed. Relative to general e-waste issues, only education and stakeholder showed significant associations with e-waste legislation and management. The main e-waste disposal methods adopted by respondents were disposal at dumpsites (22.7%), repair and reuse (21.1%) and reselling (20.1%). Almost 10% of respondents made changes to their e-waste disposal practices over the past 5 years. These changes were mainly due to the economic benefits derived from reselling e-waste (37.6%) and the perceived adverse impacts of e-waste on the environment (23.9%). Overall, there is the need to intensify awareness on 'Ghana's Act 917', especially issues regarding sustainable e-waste management practices.

Toxic Metals in Particulate Matter and Health Risks in an E-Waste Dismantling Park and Its Surrounding Areas: Analysis of Three PM Size Groups

Heavy metals generated from e-waste have created serious health risks for residents in e-waste disposal areas. This study assessed how airborne toxic metals from an e-waste dismantling park (EP) influenced surrounding residential areas after e-waste control. PM_2.5, PM₁₀, and total suspended particles (TSP) were sampled from 20 sites, including an EP, residential areas, and an urban site; ten kinds of metals were analyzed using ICP-MS and classified as PM_2.5, PM_2.5-10, and PM_10-100. Results showed that metals at the EP tended to be in coarser particles, while metals from residential areas tended to be in finer particles. A source analysis showed that metals from the EP and residential areas may have different sources. Workers' cancer and non-cancer risks were higher when exposed to PM_2.5-10 metals, while residents' risks were higher when exposed to PM_2.5 metals. As and Cr were the most strongly associated with cancer risks, while Mn was the most strongly associated with the non-cancer risk. Both workers and residents had cancer risks (>1.0 × 10^-6), but risks were lower for residents. Therefore, e-waste control can positively affect public health in this area. This study provides a basis for further controlling heavy metal emissions into the atmosphere by e-waste dismantling and encouraging worldwide standardization of e-waste dismantling.

The development of sustainable IoT E-waste management guideline for households

The introduction of new technology, such as the Internet of Things (IoT), entails a growth in digital devices, which could ultimately result in a high amount of electronic trash (e-waste) production if they are not appropriately managed. Apart from that, the regulation on possible "IoT E-waste" generation is yet to be regulated, probably due to the new development and implementation of IoT globally. Hence, this paper proposed a Sustainable IoT E-waste Management guideline for households. This guideline could assist government agencies and policymakers in their strategies, planning, development, and implementation of a sustainable household IoT e-waste management initiatives in Malaysia. This study is an exploratory study that adopts a qualitative case study research method. The guideline was developed based on the Integrated Sustainable Waste Management (ISWM) Model. This guideline contributes to Malaysia's sustainability agenda in reducing carbon emissions intensity towards 2030 by 45 percent.

Waste Management for Green Concrete Solutions: A Concise Critical Review

Reinforced concrete based on ordinary Portland cement (OPC) is one of the most commonly used materials in modern buildings. Due to the global growth of the building industry, concrete components have been partially or completely replaced with waste materials that can be used as binders or aggregates. Besides the ecological aspects, modern architecture widely needs materials to make the concrete durable, resisting large loads and various detrimental forces in the environment. This opens the possibilities of managing waste materials and applying them in practice. This paper presents a concise review of the green solutions for ecofriendly materials in the building industry that deal with the practical application of materials commonly treated as waste. The main emphasis was placed on their influence on the properties of the building material, optimal composition of mixtures, and discussion of the advantages and disadvantages of each of the “green” additives. It turned out that some solutions are far from being ecofriendly materials, as they leech and release numerous harmful chemicals into the environment during their presence in concrete. Finally, the paper suggests a research direction for the development of an ecofriendly structural material for a sustainable future.

Lignin and Keratin-Based Materials in Transient Devices and Disposables: Recent Advances Toward Materials and Environmental Sustainability

Rising concerns and the associated negative implications of pollution from e-waste and delayed decomposition and mineralization of component materials (e.g., plastics) are significant environmental challenges. Hence, concerted pursuit of accurate and efficient control of the life cycle of materials and subsequent dematerialization in target environments has become essential in recent times. The emerging field of transient technology will play a significant role in this regard to help overcome current environmental challenges by enabling the use of novel approaches and new materials with unique functionalities to produce devices and materials such as disposable diagnostic devices, flexible solar panels, and foldable displays that are more ecologically benign, low-cost, and sustainable. The prerequisites for materials employed in transient devices and disposables include biodegradability, biocompatibility, and the inherent ability to mineralize or dissipate in target environments (e.g., body fluids) in a short lifetime with net-zero impact. Biomaterials such as lignin and keratin are well-known to be among the most promising environmentally benign, functional, sustainable, and industrially applicable resources for transient devices and disposables. Consequently, considering the current environmental concerns, this work focuses on the advances in applying lignin and keratin-based materials in short-life electronics and single-use consumables, current limitations, future research outlook toward materials, and environmental sustainability.

A Review on Global Emissions by E-Products Based Waste: Technical Management for Reduced Effects and Achieving Sustainable Development Goals

In the 21st century, a great amount of electrical and electronic waste (e-waste) has accumulated, and the unregulated nature of its disposal and recycling represents a particular hazard in a global context. For the purposes of e-waste management, there must be more emphasis on the scientific processes for recycling, reusing and remanufacturing precious materials. Resource management is related to energy management; therefore, the harvesting of costly materials from e-waste is important for both energy management and sustainable development. At present, a lack of scientific recycling of a significant amount of e-waste is a source of environmental pollution and health hazards that are having a detrimental effect on sustainable development goals. It is necessary to find a process for recovering valuable materials from e-waste with the minimum possible environmental impact. At present, it is essential to modify the process of electrical and electronic products (e-products) becoming e-waste, and the subsequent process of e-waste recycling, in order to lessen the impact in terms of pollution. E-waste scientific recycling initiatives can reduce the environmental impact of the process, which in turn can support a shift from the current linear flow of costly materials to a more sustainable circular flow. Furthermore, internal consumption loss, emissions, and heating loss from e-products are the main factors contributing to the loss of energy efficiency in the process, which in turn contributes to environmental pollution. Promoting green innovation in the manufacturing process of e-products, as well as their reuse, can reduce the environmental impact of e-waste in near future. Both of these pathways are imperative for a less polluted, low-toxic environment and sustainable development. However, the sustainable development initiative of the United Nation Environmental Programme (UNEP) policy framework is the ultimate goal. This is expected to support the management of environmental pollution, maintaining it at an acceptable level, while also preventing hazardous risks to human health. Hence, this review examines the prospects for achievable environmental sustainability through technological developments.

Biologically engineered microbes for bioremediation of electronic waste: Wayposts, challenges and future directions

In the face of a burgeoning stream of e-waste globally, e-waste recycling becomes increasingly imperative, not only to mitigate the environmental and health risks it poses but also as an urban mining strategy for resource recovery of precious metals, rare Earth elements, and even plastics. As part of the continual efforts to develop greener alternatives to conventional approaches of e-waste recycling, biologically assisted degradation of e-waste offers a promising recourse by capitalising on certain microorganisms' innate ability to interact with metals or degrade plastics. By harnessing emerging genetic tools in synthetic biology, the evolution of novel or enhanced capabilities needed to advance bioremediation and resource recovery could be potentially accelerated by improving enzyme catalytic abilities, modifying substrate specificities, and increasing toxicity tolerance. Yet, the management of e-waste presents formidable challenges due to its massive volume, high component complexity, and associated toxicity. Several limitations will need to be addressed before nascent laboratory-scale achievements in bioremediation can be translated to viable industrial applications. Nonetheless, vested groups, involving both start-up and established companies, have taken visionary steps towards deploying microbes for commercial implementation in e-waste recycling.

Biosorption and Bioleaching of Heavy Metals from Electronic Waste Varied with Microbial Genera

Industrialization and technological advancements have led to the exploitation of natural resources and the production of hazardous wastes, including electronic waste (E-waste). The traditional physical and chemical techniques used to combat E-waste accumulation have inherent drawbacks, such as the production of harmful gases and toxic by-products. These limitations may be prudently addressed by employing green biological methods, such as biosorption and bioleaching. Therefore, this study was aimed at evaluating the biosorption and bioleaching potential of seven microbial cultures using E-waste (printed circuit board (PCB)) as a substrate under submerged culture conditions. The cut pieces of PCB were incubated with seven microbial cultures in liquid broth conditions in three replicates. Atomic absorption spectroscopy (AAS) analysis of the culture biomass and culture filtrates was performed to evaluate and screen the better-performing microbial cultures for biosorption and bioleaching potentials. The best four cultures were further evaluated through SEM, energy-dispersive X-ray spectroscopy (EDX), and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) studies to identify the possible culture that can be utilized for the biological decontamination of E-waste. The study revealed the highest and differential ability of Pleurotus florida and Pseudomonas spp. for biosorption and bioleaching of copper and iron. This can be attributed to bio-catalysis by the laccase enzyme. For both P. florida and Pseudomonas spp. on the 20th day of incubation, laccase exhibited higher specific activity (6.98 U/mg and 5.98 U/mg, respectively) than other microbial cultures. The biomass loaded with Cu2+ and Fe2+ ions after biosorption was used for the desorption process for recovery. The test cultures exhibited variable copper recovery efficiencies varying between 10.5 and 18.0%. Protein characterization through SDS-PAGE of four promising microbial cultures exhibited a higher number of bands in E-waste as compared with microbial cultures without E-waste. The surface topography studies of the E-waste substrate showed etching, as well as deposition of vegetative and spore cells on the surfaces of PCB cards. The EDX studies of the E-waste showed decreases in metal element content (% wt/% atom basis) on microbial treatment from the respective initial concentrations present in non-treated samples, which established the bioleaching phenomenon. Therefore, these microbial cultures can be utilized to develop a biological remediation method to manage E-waste.

A Review on Global E-Waste Management: Urban Mining towards a Sustainable Future and Circular Economy

The trending need for smarter electrical and electronic equipment (EEE) is surging globally by the year and is giving rise to huge amounts of outdated EEE going into landfills. This has caused enormous threats to our environment and the health of living beings due to its unsustainable ways of collection, treatment and disposal of waste EEE or E-waste. With increasing E-waste, the formal sectors lack infrastructure, technology and expertise required to collect and process the E-waste in an environmentally sound manner. This article is intended to bring out the global best practices in the field of E-waste management, to shed light on the importance of policy implementation, technology requirement and social awareness to arrive at a sustainable and circular economy. Although about 71% of the world’s populace has incorporated E-waste legislation, there is a need to enforce and implement a common legal framework across the globe. The article explains the gap created among the stakeholders and their knowledge on the roles and responsibilities towards a legalized E-waste management. It further explains the lack of awareness on extended producer responsibility (EPR) and producer responsibility schemes. Despite various legislations in force, numerous illegal practices such as acid leaching, open incineration, illegal dumping carried out by the informal sector are causing harm to the environment, natural resources and the safety of unorganized and unskilled labor. The article discusses the crucial need for awareness amongst stakeholders, consumer behavior and the global challenges and opportunities in this field to achieve a low-carbon, circular economy. To conclude, the article highlights the importance of common legal framework, EPR and licenses, transformation of the informal sector, benchmark technologies, responsibilities of various stakeholders and entrepreneurial opportunities to enhance the formal capacity. The article wholly advocates for transparency, accountability and traceability in the E-waste recycling chain, thus creating a greener environment and protecting our planet and natural resources for future generations.

Forty years studies on polychlorinated biphenyls pollution, food safety, health risk, and human health in an e-waste recycling area from Taizhou city, China: a review

E-waste generation has become a serious environmental challenge worldwide. Taizhou of Zhejiang Province, situated on the southeast coastline of China, has been one of the major e-waste dismantling areas in China for the last 40 years. In this review, we focused on the polychlorinated biphenyl (PCB) trends in environmental compartments, burden and impact to humans, food safety, and health risk assessment from Taizhou, China. The review suggested that PCBs showed dynamic trends in air, soil, water, biodiversity, and sediments. Soils and fish samples indicated higher levels of PCBs than sediments, air, water, and food items. PCB levels decreased in soils with the passage of time. Agriculture soils near the e-waste recycling sites showed more levels of total PCBs than industrial soils and urban soils. Dioxin-like PCB levels were higher in humans near Taizhou, suggesting that e-waste pollution could influence humans. Compared with large-scale plants, simple household workshops contributed more pollution of PCBs to the environment. Pollution index, hazard quotient, and daily intake were higher for PCBs, suggesting Taizhou should be given priority to manage the e-waste pollution. The elevated body burden may have health implications for the next generation. The areas with stricter control measures, strengthened laws and regulations, and more environmentally friendly techniques indicated reduced levels of PCBs. For environment protection and health safety, proper e-waste dismantling techniques, environmentally sound management, awareness, and regular monitoring are very important.

The environmental sustainability of data-driven health research: A scoping review

Data-Driven and Artificial Intelligence technologies are rapidly changing the way that health research is conducted, including offering new opportunities. This will inevitably have adverse environmental impacts. These include carbon dioxide emissions linked to the energy required to generate and process large amounts of data; the impact on the material environment (in the form of data centres); the unsustainable extraction of minerals for technological components; and e-waste (discarded electronic appliances) disposal. The growth of Data-Driven and Artificial Intelligence technologies means there is now a compelling need to consider these environmental impacts and develop means to mitigate them. Here, we offer a scoping review of how the environmental impacts of data storage and processing during Data-Driven and Artificial Intelligence health-related research are being discussed in the academic literature. Using the UK as a case study, we also offer a review of policies and initiatives that consider the environmental impacts of data storage and processing during Data-Driven and Artificial Intelligence health-related research in the UK. Our findings suggest little engagement with these issues to date. We discuss the implications of this and suggest ways that the Data-Driven and Artificial Intelligence health research sector needs to move to become more environmentally sustainable.

Tracing Relationship between Cluster’s Performance and Transition to the Circular Economy

Clusters are defined as geographically close groups of organizations that work together to gain a competitive advantage. Clusters’ shared activities involve knowledge sharing, a common pool of resources, innovations, and cooperation. From a more advanced perspective, clusters can work in industrial symbiosis sharing resources, energy, water, and other products. Tendencies of recent research indicate the growing interest in shifting to an efficient use of resources and sustainable development through the circular economy (CE). Clusters can work as enablers of CE to achieve a competitive advantage. The purpose of this study is to trace the relationships between cluster performance and shifting to the CE indicators. Correlation analysis was used as a method to indicate the relationships between pairs of clusters’ performance and shifting to the CE indicators. The limitations of the research refer to the selection of the indicators as both concepts gain insights, although still debatable. The results show that 16 out of 25 cluster performance indicators were identified that have strong or moderate relationships among pairs while shifting to the CE indicators. These indicators are recommended to be included in observation, benchmarking, or evaluation of the clusters’ activities. They can be significant in monitoring the development of shifting to the CE or in combinations with other research areas.

LMDI Decomposition Analysis of E-Waste Generation in the ASEAN

The economies of ASEAN member states are growing rapidly, and electrical and electronic waste (E-waste) generated from them are also showing a rapid increase. In this context, this study conducted an LMDI decomposition analysis on the amount of E-waste generated in ASEAN member countries from 2015 to 2019 and decomposed it into E-waste intensity, economic growth, and population effects. Then, based on analysis results, policy implications are suggested to improve their E-waste management. According to the analysis results, ASEAN countries can be classified into three groups. The first group includes Indonesia, the Philippines, Singapore, Thailand; economic growth was the main driving factor of E-waste increase in these countries. However, E-waste had also decreased due to the effect of E-waste intensity. The second group includes countries where economic growth was not the only driving factor for E-waste increase, but also where E-waste had increased due to the effect of E-waste intensity. These countries include Cambodia, Malaysia, and Viet Nam. Finally, the third group consists of countries where the effect of E-waste intensity is the main driving factor, including Brunei Darussalam, Lao PDR, and Myanmar. This research shows that ASEAN countries need policies that can effectively deal with the threat of E-waste as a result of high economic growth and policies that can improve intensity by reducing the generation of E-waste.

Enhancement of WEEE Management Practices in MTN Phone Village, Rumukurushi, Port Harcourt, Nigeria

Informal recycling has been a source of challenges to a mobile telephone network (MTN) phone village in Rumukurushi, Port Harcourt, Nigeria, and several locations in developing countries. In order to bring a lasting solution to the menace of informal recycling in this location, the study proposed a new waste electrical and electronic equipment (WEEE) management system. The system comprises the application of two key concepts. The first concept includes limiting the activities of informal recyclers to WEEE collection only. This implies WEEE treatment, dismantling, etc., are carried out by government-approved agencies and experts. The second concept involves the application of the just-in-time (JIT) management concept for managing WEEE. The concept ensures that WEEE is only requested from the recycler or the individuals in possession of it and only on demand. The study adopted a qualitative research approach. Data collection and analysis were achieved via semi-structured phone interviews and thematic analysis, respectively. The outcome of the study limits the activities of the informal recyclers to WEEE collection. Informal recyclers gain revenue from collection. A reduction in the waiting time of workers and WEEE storage space is achieved. This offers safety, efficiency, and an increased productivity. This will help to revolutionise the WEEE management system in the location.

Assessment of dust trace elements in an e-waste recycling area and related children's health risks

Children from Guiyu, an electronic waste (e-waste) recycling town, are exposed to trace elements via dust. However, the source, pathways, and influence factors of house dust and the association of house dust with child inflammation in an e-waste recycling area are not well-known. This study investigated dust trace elements in children's living environment and the associations of house dust trace elements with influence factors and child inflammation. A total of 108 dust samples from children's residences, roads, and kindergartens in Guiyu (an exposed area) and Haojiang and Shantou urban areas (reference areas) were collected and analyzed, as well as children's questionnaire data. The Mann-Whitney U test found there were higher trace element concentrations in road dust (Co, Ni, and Cu), kindergarten dust (Al, V, Mn, Co, Ni, and Zn), and house dust (V, Co, Cu, As, and Cd) in Guiyu than in Haojiang and Shantou urban areas (P < 0.05). Our analysis showed that house dust and road dust have similar distribution patterns of trace elements. Spearman's correlations showed close relationships among quantities of trace elements (P < 0.05). Higher trace element concentrations in dust were found in houses that used indoor shoe cabinets and opened windows frequently (P < 0.05). In houses of children with airway inflammation, higher dust Ba concentrations were found (P < 0.05), and if their fathers did not work with e-waste, we found higher dust Pb concentrations (Mann-Whitney U test, P < 0.05). Health assessments showed a high risk of exposure through ingestion and an acceptable risk of exposure through inhalation of dust trace elements for children. However, relationships between airway inflammation and house dust trace elements showed the inhalation risk might be underestimated. This study suggests trace element exposure via dust poses a health risk for children living in e-waste recycling areas.

Achievements in pyrolysis process in E-waste management sector

Many aspects of modern life of our civilization are associated with using electrical and electronic devices (EEE). Ever-increasing demand for high-performance EEE and accelerated technological development make the replacement of EEE become frequent. This leads to the generation of a tremendous amount of electronic waste (E-waste). Challenges of the management of E-waste have recently arisen out of a dearth of proper technologies to treat E-waste. Pyrolysis process can thermochemically treat waste materials that have a complicated nature and inhomogeneity. This article gives a systematic review as an effort to tackle the challenges in the context of achievements in pyrolysis process in E-waste management sector. Pyrolysis mechanism and types of pyrolysis processes and pyrolysis reactors are first discussed. Various pyrolysis technologies applied to the E-waste treatment are then summarized and compared to each other. Points to be considered for further research and pending challenges of E-waste pyrolysis are also discussed. The pyrolysis treatment of E-waste is not yet fully industrialized mostly because of high costs. However, there should be much room for further developing the E-waste pyrolysis; hence, its industrialization and commercialization is just a matter of time.

Waste Reutilization in Polymeric Membrane Fabrication: A New Direction in Membranes for Separation

In parallel to the rapid growth in economic and social activities, there has been an undesirable increase in environmental degradation due to the massively produced and disposed waste. The need to manage waste in a more innovative manner has become an urgent matter. In response to the call for circular economy, some solid wastes can offer plenty of opportunities to be reutilized as raw materials for the fabrication of functional, high-value products. In the context of solid waste-derived polymeric membrane development, this strategy can pave a way to reduce the consumption of conventional feedstock for the production of synthetic polymers and simultaneously to dampen the negative environmental impacts resulting from the improper management of these solid wastes. The review aims to offer a platform for overviewing the potentials of reutilizing solid waste in liquid separation membrane fabrication by covering the important aspects, including waste pretreatment and raw material extraction, membrane fabrication and characterizations, as well as the separation performance evaluation of the resultant membranes. Three major types of waste-derived polymeric raw materials, namely keratin, cellulose, and plastics, are discussed based on the waste origins, limitations in the waste processing, and their conversion into polymeric membranes. With the promising material properties and viability of processing facilities, recycling and reutilization of waste resources for membrane fabrication are deemed to be a promising strategy that can bring about huge benefits in multiple ways, especially to make a step closer to sustainable and green membrane production.

Analysis of Households' E-Waste Awareness, Disposal Behavior, and Estimation of Potential Waste Mobile Phones towards an Effective E-Waste Management System in Dubai

During the recent decades, the world has seen ongoing economic and technological development which resulted in the generation of huge volumes of electrical and electronic waste (e-waste). In the Middle East, the United Arab Emirates (UAE) ranks among countries with large e-waste generation due to its consumers' high spending on electronic devices thereby resulting in a high obsolescence rate in the country. Accordingly, this study aims to analyze the e-waste management and recycling practices in the UAE. It takes Dubai as a case study and conducts a structured questionnaire to analyze households' awareness, consumption of electronic devices in general and mobile phones in particular, and the disposal behavior of e-waste. Waste mobile phones is taken as a key representative in this study, in which potential waste mobile phones is estimated using the Approximation 1 method in the period 2021-2030. Results from the survey illustrated gaps among households' awareness and disposal behavior of e-waste, where e-waste recycling rates were noticed to be low. Based on these gaps, strategies were proposed for an effective e-waste management system in the context of Dubai, and were supported by the proposal of an e-waste legislation framework in the UAE.

Comprehensive Identification of Liquid Crystal Monomers-Biphenyls, Cyanobiphenyls, Fluorinated Biphenyls, and their Analogues-in Waste LCD Panels and the First Estimate of their Global Release into the Environment

Our previous study demonstrated massive emissions of liquid crystal monomers (LCMs) from liquid crystal display (LCD)-associated e-waste dismantling; however, the compositions, priority list, and inventory of LCMs in waste LCD panels remain unknown. Herein, we conducted the first comprehensive identification covering a broader range of LCMs, including 21 biphenyls and analogues (BAs), 28 cyanobiphenyls and analogues (CBAs), and 44 fluorinated biphenyls and analogues (FBAs), in waste television/computer LCD panels. A total of 64 of the 93 target LCMs, including 19 BAs, 6 CBAs, and 39 FBAs, were widely detected in collected waste LCD panels. Approximately 10-18 of the 64 detectable LCMs were identified as the main compositions in various waste LCD panels, which contributed to >90% of the total LCMs. Total concentrations of FBAs in the television/computer LCD panel samples were comparable to those of BAs but much higher than those of CBAs, indicating FBAs and BAs being the commonly used LCM categories. The composition distribution of LCMs varied between television/computer LCDs and among different brands of television/computer LCDs. A preliminary estimate of the globally direct release of LCMs from waste television/computer LCD panels into various environmental compartments was about 1.07-107 kg/year, which will increase considerably in the near future.

E-Waste Recycling and Resource Recovery: A Review on Technologies, Barriers and Enablers with a Focus on Oceania

Electronic e-waste (e-waste) is a growing problem worldwide. In 2019, total global production reached 53.6 million tons, and is estimated to increase to 74.7 million tons by 2030. This rapid increase is largely fuelled by higher consumption rates of electrical and electronic goods, shorter life cycles and fewer repair options. E-waste is classed as a hazardous substance, and if not collected and recycled properly, can have adverse environmental impacts. The recoverable material in e-waste represents significant economic value, with the total value of e-waste generated in 2019 estimated to be US $57 billion. Despite the inherent value of this waste, only 17.4% of e-waste was recycled globally in 2019, which highlights the need to establish proper recycling processes at a regional level. This review provides an overview of global e-waste production and current technologies for recycling e-waste and recovery of valuable material such as glass, plastic and metals. The paper also discusses the barriers and enablers influencing e-waste recycling with a specific focus on Oceania.

Urban mining of obsolete computers by manual dismantling and waste printed circuit boards by chemical leaching and toxicity assessment of its waste residues

Waste residues and acidic effluents (post-processing of E-waste) released into the local surroundings cause perilous environmental threats and potential risks to human health. Only limited research and information are available toward the sustainable management of waste residues generated post resource recovery of E-waste components. In the present study, the manual processing of obsolete computer (keyboard, monitor, CPU, and mouse) and chemical leaching of waste printed circuit boards (WPCBs) (motherboard, hard drive, DVD drive, and power supply) were performed for urban mining. The toxicity characteristics of typical pollutants in the residues of the WPCBs (post chemical leaching) were studied by toxicity characteristics leaching procedure (TCLP) test. Manual dismantling techniques resulted in an efficient urban mining concept with an overall average profit estimation of INR 2513.73/US$ 34.59. The chemical leaching of WPCBs showed a high concentration of metal leaching like Cu (229662 ± 575.3 mg/kg) and Pb (36785.67 ± 13.07 mg/kg) in the motherboard after stripping epoxy coating. The toxicity test revealed that the concentration of Cu (245.746 ± 0.016 mg/l) in the treated waste residue and Cu (430.746 ± 0.0015 mg/l) and Pb (182.09 ± 0.0035 mg/l) in the non-treated waste residue exceeded the threshold limit. The concentrations of other elements As, Cd, Co, Cr, Ag, Mn, Zn, Ni, Fe, Se, and In were within the permissible limit. Hence, the waste residue stands non-hazardous except Cu and Pb. Stripping out the epoxy coating of WPCBs enhances the metal leaching concentrations. The study highlighted that efficient and appropriate E-waste urban mining has immense potential in tracing the waste scrap into secondary resources. This study also emphasized that the final processed waste residue (left unattended or discarded due to lack of appropriate skill and technology) can be taken into consideration and exploited for value-added materials.

Utilization of Eco-Friendly Waste Generated Nanomaterials in Water-Based Drilling Fluids; State of the Art Review

An important aspect of hydrocarbon drilling is the usage of drilling fluids, which remove drill cuttings and stabilize the wellbore to provide better filtration. To stabilize these properties, several additives are used in drilling fluids that provide satisfactory rheological and filtration properties. However, commonly used additives are environmentally hazardous; when drilling fluids are disposed after drilling operations, they are discarded with the drill cuttings and additives into water sources and causes unwanted pollution. Therefore, these additives should be substituted with additives that are environmental friendly and provide superior performance. In this regard, biodegradable additives are required for future research. This review investigates the role of various bio-wastes as potential additives to be used in water-based drilling fluids. Furthermore, utilization of these waste-derived nanomaterials is summarized for rheology and lubricity tests. Finally, sufficient rheological and filtration examinations were carried out on water-based drilling fluids to evaluate the effect of wastes as additives on the performance of drilling fluids.

Appraisal of Households’ Knowledge and Perception towards E-Waste Management in Limpopo Province, South Africa

The generation of electronic waste (e-waste) is increasing at an alarming rate in South Africa. This waste stream is also emanating from household appliances due to beneficial attributes accrued to the use of these electronic devices. At the same time, these devices are a source of concern considering the environmental impacts as well the threat of health hazards they possess to human wellbeing. In appraising household knowledge and perception on e-waste management in Limpopo Province of South Africa, 200 semi-structured, self-administered questionnaires were used in eliciting data from the participants. The results indicated that 76% of the respondents believed that e-waste streams have negatively affected their environment. Additionally, 85% of the survey households are willing to pay for the proper disposal of their e-waste. Furthermore, the results indicated a statistically significance between gender and knowledge on e-waste management (p-value 0.003) while there was no statistically significant difference between gender and perception (p-value 0.318) on e-waste management. Based on the results, the study recommends awareness and educational campaigns as a step in changing the perception of households on e-waste and environmental consciousness.