Bioenergy from dairy manure: technologies, challenges and opportunities

Production of Porous Biochar from Cow Dung Using Microwave Process

To valorize livestock manure, the present study investigated the production of biochar from cow dung (CD) by microwave pyrolysis. The pore properties and chemical characteristics of CD and CD-based biochar products were found to correlate with the process parameters like microwave power (300-1000 W) and residence time (5-20 min). The findings indicated that CD is an excellent biomass based on the richness of lignocellulosic constituents from the results of proximate analysis and thermogravimetric analysis (TGA). Higher calorific values were obtained at mild microwave conditions, giving the maximal enhancement factor 139% in comparison with the calorific value of CD (18.97 MJ/kg). Also, it can be concluded that the biochar product obtained at 800 W for a holding time of 5 min had the maximal BET surface area of 127 m2/g and total pore volume of 0.104 cm3/g, which were microporous and mesoporous in the nitrogen adsorption-desorption adsorption analysis. On the other hand, the CD-based biochar contained oxygen-containing functional groups and inorganic minerals based on the spectroscopic analyses by Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDS), thus featuring to be prone to hydrophilicity in aqueous solutions.

Enhanced biohydrogen production from high loads of unpretreated cattle manure by cellulolytic bacterium Caldicellulosiruptor bescii at 75 °C

Caldicellulosiruptor bescii is the most thermophilic cellulolytic bacterium capable of fermenting crystalline cellulose identified to date, and it also has a superior ability to degrade plant biomass without any pretreatment. This study is the first to assess the potential of utilizing unpretreated cattle manure (UCM) as a feedstock for hydrogen (H2) production by C. bescii at a concentration range between 2.5-50 g volatile solids (VS)/L. At 50 g VS/L UCM concentrations, H2 production ceased due to inhibition of C. bescii. To alleviate the impacts of inhibition, two strategies were adopted: (i) reduction of H2 build-up in the reactor headspace via gas sparging and (ii) adaptation of C. bescii to UCM via adaptive laboratory evolution (ALE). The former increased H2 yield by 47% compared to the control reactors, where no sparging was applied. The latter increased H2 yield by 142% compared to the control reactors inoculated by the wild type C. bescii. The UCM-adapted C. bescii demonstrated a remarkable H2 yield of 161.3 ± 1.6 mL H2/g VSadded at 15 g VS/L. This yield represents a twofold increase compared to the maximum H2 yield reported in the literature amongst fermentation studies utilizing manure as feed. At 15 g VS/L, around 73% of UCM was solubilized, and the carbon balance indicated that most of the effluent carbon was in the sugar- and acid-form. The remarkable ability of C. bescii to produce H2 from UCM under non-sterile conditions presents a significant potential for sustainable biohydrogen production from renewable feedstocks.

Breakdown of biomass for energy applications using microwave pyrolysis: A technological review

The agricultural industry faces a permanent increase in waste generation, which is associated with the fast-growing population. Due to the environmental hazards, there is a paramount demand for generating electricity and value-added products from renewable sources. The selection of the conversion method is crucial to develop an eco-friendly, efficient and economically viable energy application. This manuscript investigates the influencing factors that affect the quality and yield of the biochar, bio-oil and biogas during the microwave pyrolysis process, evaluating the biomass nature and diverse combinations of operating conditions. The by-product yield depends on the intrinsic physicochemical properties of biomass. Feedstock with high lignin content is favourable for biochar production, and the breakdown of cellulose and hemicellulose leads to higher syngas formation. Biomass with high volatile matter concentration promotes the generation of bio-oil and biogas. The pyrolysis system's conditions of input power, microwave heating suspector, vacuum, reaction temperature, and the processing chamber geometry were influence factors for optimising the energy recovery. Increased input power and microwave susceptor addition lead to high heating rates, which were beneficial for biogas production, but the excess pyrolysis temperature induce a reduction of bio-oil yield.

Utilization of current pyrolysis technology to convert biomass and manure waste into biochar for soil remediation: A review

Traditional disposal of animal manures and lignocellulosic biomass is restricted by its inefficiency and sluggishness. To advance the carbon management and greenhouse gas mitigation, this review scrutinizes the effect of pyrolysis in promoting the sustainable biomass and manure disposal as well as stimulating the biochar industry development. This review has examined the advancement of pyrolysis of animal manure (AM) and lignocellulosic biomass (LB) in terms of efficiency, cost-effectiveness, and operability. In particular, the applicability of pyrolysis biochar in enhancing the crops yields via soil remediation is highlighted. Through pyrolysis, the heavy metals of animal manures are fixated in the biochar, thereby both soil contamination via leaching and heavy metal uptake by crops are minimized. Pyrolysis biochar is potentially use in soil remediation for agronomic and environmental co-benefits. Fast pyrolysis assures high bio-oil yield and revenue with better return on investment whereas slow pyrolysis has low revenue despite its minimum investment cost because of relatively low selling price of biochar. For future commercialization, both continuous reactors and catalysis can be integrated to pyrolysis to ameliorate the efficiency and economic value of pyrolysis biochar.

Biohydrogen in a circular bioeconomy: A critical review

Hydrogen produced from biomass feedstocks is considered an effective solution in moving toward a decarbonized economy. Biohydrogen is a clean energy source that has gained global attention for adoption as it promises to mitigate climate change and human environmental damage. Through the circular economy framework, sustainable biohydrogen production with other bioproducts while addressing issues such as waste management is possible. This study presents a comprehensive review of the various biomass feedstocks and processing technologies associated with biohydrogen generation, as well as the possible integration of existing industries into a circular bioeconomy framework. The currently standing challenges and future perspectives are also discussed.

Low-Temperature Pretreatment of Biomass for Enhancing Biogas Production: A Review

Low-temperature pretreatment (LTPT, Temp. < 100 °C or 140 °C) has the advantages of low input, simplicity, and energy saving, which makes engineering easy to use for improving biogas production. However, compared with high-temperature pretreatment (>150 °C) that can destroy recalcitrant polymerized matter in biomass, the action mechanism of heat treatment of biomass is unclear. Improving LTPT on biogas yield is often influenced by feedstock type, treatment temperature, exposure time, and fermentation conditions. Such as, even when belonging to the same algal biomass, the response to LTPT varies between species. Therefore, forming a unified method for LTPT to be applied in practice is difficult. This review focuses on the LTPT used in different biomass materials to improve anaerobic digestion performance, including food waste, sludge, animal manure, algae, straw, etc. It also discusses the challenge and cost issues faced during LTPT application according to the energy balance and proposes some proposals for economically promoting the implementation of LTPT.