Simultaneous mineralization of 2-anilinophenylacetate and denitrification by Ru/Fe modified biocathode double-chamber microbial fuel cell

Deciphering the differentiated performance on electricity generation and COD degradation by Rhodopseudomonas-dominated bioanode in light or dark

Anoxygenic phototrophic bacteria is a promising catalyst for constructing bioanode, but the mixed culture with non-photosynthetic bacteria is inevitable in an open environment application. In this study, a Rhodopseudomonas-dominated mixed culture with other electrogenic bacteria was investigated for deciphering the differentiated performance on electricity generation in light or dark conditions. The kinetic study showed that reaction rate of OM degradation was 9 times higher than that under dark condition, demonstrating that OM degradation was enhanced by photosynthesis. However, CE under light condition was lower. It indicated that part of OM was used to provide hydrogen donors for the fixation of CO2 or hydrogen production in photosynthesis, decreasing the OM used for electron transfer. In addition, higher COD concentration was not conducive to electricity generation. EIS analysis demonstrated that higher OM concentration would increase Rct to hinder the transfer of electrons from bacteria to the electrode. Indirect and direct electron transfer were revealed by CV analysis for light and dark biofilm, respectively, and nanowires were also observed by SEM graphs, further revealing the differentiate performance. Microbial community analysis demonstrated Rhodopseudomonas was dominated in light and decreased in dark, but Geobacter increased apparently from light to dark, resulting in different power generation performance. The findings revealed the differentiated performance on electricity generation and pollutant removal by mixed culture of phototrophic bacteria in light or dark, which will improve the power generation from photo-microbial fuel cells.

Enhancing biological conversion of NO to N2O by utilizing thermophiles instead of mesophiles

The production of nitrous oxide (N2O) through the biological denitrification of nitric oxide (NO) from flue gases has recently been achieved. Although the temperature of flue gas after desulphurization is usually 45-70 °C, all previous studies conducted microbial denitrification of NO under mesophilic conditions (22-35 °C). This study investigated the biological conversion of NO to N2O in both mesophilic (35-45 °C) and thermophilic conditions (45-50 °C). The results showed that temperature has a great impact on N2O production, with a maximum conversion efficiency (from NO to N2O) of 82% achieved at 45 °C, which is obviously higher than the reported conversion efficiencies (24-71%) under mesophilic conditions. Additionally, high-throughput sequencing result showed that the genera Enterococcus, Clostridium, Romboutsia, and Streptococcus were closely related to NO denitrification and N2O production. Microbial communities at 40 and 45 °C had greater metabolizing capacities for polymeric carbon sources. This study suggests that thermophilic condition (45 °C) is more suitable for biological production of N2O from NO.

A magnetically induced self-assembly of Ru@Fe3O4/rGO cathode for diclofenac degradation in electro-Fenton process

In this study, a novel magnetic nanocomposite of Ru@Fe3O4/rGO was successfully synthesized by a simple hydro-thermal method. The Ru@Fe3O4/rGO particles were assembled and immobilized for innovative magnetically assembled electrode (MAE) without any binder, and the electrode was further applied in heterogeneous electro-Fenton (hetero-EF) process for the degradation of diclofenac (DCF). The results showed that rGO could remarkably enhance the conductivity and catalyze the two-electron oxygen reduction, which greatly improved the generation of H2O2. In addition, the mixture valence of Fe and Ru species might provide rich reaction sites and enhance electron transfer by synergy. Thus, the Ru@Fe3O4/rGO MAE exhibited a stable and high electrocatalytic activity in the hetero-EF process for DCF degradation over a wide pH range from 2 to 9 owing to the higher electroactive surface area (EASA) and lower charge/mass-transfer resistance. The DCF degradation efficiency could reach about 100% within 90 min under pH 5 and current 40 mA, and the Ru@Fe3O4/rGO MAE showed high stability and reusability after five cycles. Theoretically, 1O2 and •OH were the main reactive oxygen species (ROS) participating in DCF degradation in the Ru@Fe3O4/rGO MAE hetero-EF process. Furthermore, according to the LC-MS/MS intermediates, the possible DCF degradation pathway was deduced including dechlorination, hydroxylation and ring opening attacked by ROS. Eleven intermediates were detected during DCF degradation in the MAE hetero-EF process, and the ecological risk of DCF degradation in Ru@Fe3O4/rGO MAE hetero-EF process was significantly reduced. This study provides new insights into the magnetically assembled electrode of Ru@Fe3O4/rGO and displays a new practical application prospect of the materials for high-efficient removal and degradation of DCF from wastewater.

Functions and mechanisms of sponge iron-mediated multiple metabolic processes in anaerobic ammonium oxidation

Sponge iron (SI) is a promising material for nitrogen removal from wastewater. This study reveals the potential functions and mechanisms of SI-mediated multiple metabolic processes in the nitrogen removal of Anammox. The results showed that although the SI application prolonged the start-up time of the reactor, achieved efficient and stable nitrogen removal after a successful start-up. The total nitrogen removal efficiency of the SI-Anammox system (92.62%) was 13.30% higher than that of R0 without SI (79.32%). The increase in nitrogen removal performance was accompanied by an increase in SAA and EPS content. Further microbial analysis showed significant enrichment of functional microorganisms, such as Candidatus_Brocadia, Nitrosomonas, Ellin6067, and Nitrospira. Multi-omics evidence suggests that efficient nitrogen removal is ultimately attributable to the enhancement of the specific key Fe- and N-functional genes in Anammox.

Electrodeposited copper enhanced removal of 2,4-dichlorophenol in batch and flow reaction in Cu@CC-PS-MFC system

Combination of microbial fuel cell (MFC) and advanced oxidation process (AOP) is promising for pollutant removal. In this paper, Cu0-loaded carbon cloth cathode by electrodeposition (Cu@CC-PS-MFC) was applied to enhance 2,4-dichlorophenol (2,4-DCP) degradation based on persulfate (PS) activation in microbial fuel cell. Cu0 exhibited a typical structure of face-centered cubic metal polyhedron on carbon cloth. The removal of 2,4-DCP by Cu@CC-PS-MFC (75.6%) was enhanced by more than 50% compared to CC-PS-MFC (49.2%) after 1 h of reaction. 30 mg/L 2,4-DCP in Cu@CC-PS-MFC was completely removed and achieved a high mineralization (80.6%) after 9 h of reaction under optimized condition with low dissolved copper ion concentration (0.615 mg/L). Meanwhile, more than 90% removal of 2,4-DCP was stably achieved with flow operation condition (hydraulic residence time of 7.2 h). The change of copper valent state Cu0/Cu2O/CuO was the main mechanism of PS activation with main reactive species of O•H and O21. The bioanode of MFC enhanced the in-situ regeneration of ≡Cu+ and ≡Cu0 on the catalyst surface by transporting electrons, which was believed to contribute to good catalyst lifetime and excellent 2,4-DCP removal. Electrodeposited copper contributes to the enhanced degradation of 2,4-DCP with energy recovery at the same time which can further broaden the application MFC.

Ammonia/ammonium removal/recovery from wastewaters using bioelectrochemical systems (BES): A review

This review updates the current research efforts on using BES to recover NH₃/NH₄⁺, highlighting the novel configurations and introducing the working principles and the applications of microbial fuel cell (MFC), microbial electrolysis cell (MEC), microbial desalination cell (MDC), and microbial electrosynthesis cell (MESC) for NH₃/NH₄⁺ removal/recovery. However, commonly studied BES processes for NH₃/NH₄⁺ removal/recovery are energy intensive with external aeration needed for NH₃ stripping being the largest energy input. In such a process bipolar membranes used for yielding a local alkaline pool recovering NH₃ is not cost-effective. This gives a chance to microbial electrosynthesis which turned out to be a potential alternative option to approach circular bioeconomy. Furtherly, the reactor volume and NH₃/NH₄⁺ removal/recovery efficiency has a weakly positive correlation, indicating that there might be other factors controlling the reactor performance that are yet to be investigated.

Microbial community succession in response to sludge composting efficiency and heavy metal detoxification during municipal sludge composting

This study researched microbial community succession in response to sludge composting efficiency and heavy metal detoxification during municipal sludge co-composting with spent mushroom and spent bleaching. The change law of key physicochemical properties, the heavy metals contents and forms during composting were analyzed, and the passivation of heavy metals after composting was explored. High-throughput sequencing was used to analyze the microbial community structure of treat 2 during composting, and the correlation analysis of microbial community structure with heavy metal contents and forms were carried out. The results showed that the sludge of each treatment reached composting maturity after 26 days of composting. Organic matter content, electrical conductivity, pH and seed germination index of treat 2 were all in line with the standard limit of agricultural sludge. Because of the presence of compost bacteria addition, the passivating heavy metals performance of treat 2 satisfied the standard limit of agricultural sludge after composting, which was superior to that of treat 1 and treat 3. The diversity of microbial communities in treat 2 decreased during composting. Extensive bacteria such as Bacillus, Geobacter, Lactobacillus, and Pseudomonas, which possessed the abilities of heavy metal passivation and organic oxidizing, were dominant in treat 2 during the heating stage. However, as composting proceeded, Tuberibacillus with ability of organic oxidizing gradually became the most dominant species at the thermophilic and cooling stages. Changes in microbial function varied from changes of microbial community in treat 2, subsequently affected the performances of heavy metal passivation and organic oxidizing during composting.

Organohalide Respiration with Diclofenac by Dehalogenimonas

Diclofenac (DCF) is a pharmaceutically active contaminant frequently found in aquatic ecosystems. The transformation pathways and microbiology involved in the biodegradation of DCF, particularly under anoxic conditions, remain poorly understood. Here, we demonstrated microbially mediated reductive dechlorination of DCF in anaerobic enrichment culture derived from contaminated river sediment. Over 90% of the initial 76.7 ± 3.6 μM DCF was dechlorinated at a maximum rate of 1.8 ± 0.3 μM day^-1 during a 160 days' incubation. Mass spectrometric analysis confirmed that 2-(2-((2-chlorophenyl)amino)phenyl)acetic acid (2-CPA) and 2-anilinophenylacetic acid (2-APA) were formed as the monochlorinated and nonchlorinated DCF transformation products, respectively. A survey of microbial composition and Sanger sequencing revealed the enrichment and dominance of a new Dehalogenimonas population, designated as Dehalogenimonas sp. strain DCF, in the DCF-dechlorinating community. Following the stoichiometric conversion of DCF to 2-CPA (76.0 ± 2.1 μM) and 2-APA (3.7 ± 0.8 μM), strain DCF cell densities increased by 24.4 ± 4.4-fold with a growth yield of 9.0 ± 0.1 × 10⁸ cells per μmol chloride released. Our findings expand the metabolic capability in the genus Dehalogenimonas and highlight the relevant roles of organohalide-respiring bacteria for the natural attenuation of halogenated contaminants of emerging concerns (e.g., DCF).

Simultaneous denitrification and antibiotic degradation of low-C/N-ratio wastewater by a three-dimensional biofilm-electrode reactor: Performance and microbial response

Three-dimensional biofilm-electrode reactors (3D-BERs) were fabricated and used to simultaneously remove nitrate and metronidazole (MNZ) from low-C/N-ratio wastewater. The results showed that 1 mg/L MNZ significantly promoted nitrate removal. After MNZ was added to the reactor, the removal efficiencies of total nitrogen (TN) and NO₃^--N increased significantly from 18.97% and 52.09% to 71.63% and 99.98% within 6 h, respectively. The MNZ-removal kinetics conformed to a pseudo-first-order model, and the removal rate constant reached a maximum value of 0.853 h^-1, which was 4.1 and 2.8 times higher than that of pure microorganisms and pure electrochemical reactors, respectively. This indicated that the 3D-BERs constructed in this study were capable of simultaneous MNZ degradation and denitrification. In the presence of nitrate, six MNZ-degradation intermediates were identified, and four MNZ transformation pathways were proposed, including cleavage of hydroxyethyl groups, reduction of nitro groups, N-denitration, and deprotonation of side-chain hydroxyl groups. High-throughput sequencing revealed that the reactor was rich in various MNZ-degraders and denitrifiers, such as Hydrogenophaga, Methylomonas, Crenohrix, Dechloromonas, and Methylophilus. A function prediction analysis of nitrogen metabolism showed that the 3D-BER reactor with MNZ had higher denitrification activity than the other reactors tested. It was speculated that the intermediates produced by MNZ could act as carbon sources allowing denitrifying bacteria to perform denitrification, which made a nonnegligible contribution to the removal of nitrogen.

Bioelectrochemical systems-based metal recovery: Resource, conservation and recycling of metallic industrial effluents

Metals represent a large proportion of industrial effluents, which due to their high hazardous nature and toxicity are responsible to create environmental pollution that can pose significant threat to the global flora and fauna. Strict ecological rules compromise sustainable recovery of metals from industrial effluents by replacing unsustainable and energy-consuming physical and chemical techniques. Innovative technologies based on the bioelectrochemical systems (BES) are a rapidly developing research field with proven encouraging outcomes for many industrial commodities, considering the worthy options for recovering metals from industrial effluents. BES technology platform has redox capabilities with small energy-intensive processes. The positive stigma of BES in metals recovery is addressed in this review by demonstrating the significance of BES over the current physical and chemical techniques. The mechanisms of action of BES towards metal recovery have been postulated with the schematic representation. Operational limitations in BES-based metal recovery such as biocathode and metal toxicity are deeply discussed based on the available literature results. Eventually, a progressive inspection towards a BES-based metal recovery platform with possibilities of integration with other modern technologies is foreseen to meet the real-time challenges of viable industrial commercialization.

Degradation of diclofenac via sequential reduction-oxidation by Ru/Fe modified biocathode dual-chamber bioelectrochemical system: Performance, pathways and degradation mechanisms

A sequential reduction-oxidation for DCF degradation was proposed by alternating anaerobic/aerobic conditions at Ru/Fe-biocathode in a dual-chamber bioelectrochemical system (BES). Results showed that Ru/Fe-electrode was successfully fabricated by in-situ electro-deposition, which was rough and uniformly distributed with Ru⁰ and Fe⁰ particles. The morphologic changing and biocompatibility were favorable to increase the surface area and enhance microbial adhesion on Ru/Fe-electrode. At an applied voltage of 0.6 V, the potential and impedance of Ru/Fe-biocathode were -0.80 V and 26 Ω, respectively, lower than that of carbon-felt-biocathode. It led to a higher DCF degradation efficiency of 93.2% under anaerobic conditions, which was superior to that of 88.0% under aerobic conditions. Using NaHCO₃ as carbon source, DCF removal efficiency increased with increasing applied voltage, but decreased with increasing initial DCF concentration. Thirteen intermediates were measured, and two degradation pathways were proposed, among which sequential reduction-oxidation of DCF was the main pathway, dechlorination intermediates were first generated by [H] attacked under anaerobic conditions, further oxidized by microbes and OH attacked under aerobic conditions, achieving 69.6% of mineralization. After 4 d of reaction, microcystis aeruginosa growth inhibition rate decreased from 22.9 to 8.0%, signifying a significant reduction in biotoxicity. Bacteria (e.g. Nitrobacter, Nitrosomonas, Pseudofulvimonas, Aquamicrobium, Sulfurvermis, Lentimicrobiaceae, Anaerobineaceae, Bacteroidales, Hydrogenedensaceae, Dethiosulfatibacter and Azoarcus) for DCF degradation were enriched in Ru/Fe-biocathode. Microbes in Ru/Fe-biocathode had established defense mechanisms to acclimate to the unfriendly environment, while Ru/Fe-biocathode possessed higher nitrification and denitrification activities than carbon-felt-biocathode, and Ru/Fe-biocathode might be of aerobic and anaerobic biodegradation activities. DCF could be mineralized by the synergistic reaction between Ru/Fe and bacteria under sequential anaerobic/aerobic conditions.

Sustainable bioelectricity generation using Cladophora sp. as a biocathode in membrane-less microbial fuel cell

In this study, the Cladophora sp. is used to provide oxygen to the cathode of the photosynthetic biocathode membrane-less microbial fuel cell (PB-MLMFC). Non-aerated (NA-MLMFC) and mechanically-aerated (MA-MLMFC) MLMFCs are operated under similar operating conditions to evaluate the performance of PB-MLMFC with the presence of Cladophora sp. The PB-MLMFC exhibits the highest dissolved oxygen (DO) concentration, which results in a more efficient oxygen reduction reaction and a significant improvement in the electricity generation performance. The maximum power density of PB-MLMFC is 619.1 mW m^-2, which is the highest power density known to be reported for algal cathode MFCs in the literature. The electrochemical analysis shows that theCladophora sp.reduces the charge (R_ct) and mass transfer (R_mt) resistances of the PB-MLMFC, and improves the bioelectrochemical activity of the anode microorganisms. The study reveals that Cladophora sp. provides a cost-effective and renewable approach for practical applications of MLMFCs.