Enhanced bioremediation of diesel oil-contaminated seawater by a biochar-immobilized biosurfactant-producing bacteria Vibrio sp. LQ2 isolated from cold seep sediment

Synergistic effects (adsorption and biodegradation) of Streptomyces hydrogenans immobilization on nano-reed biochar for further application in upflow anaerobic sludge blanket

Water pollution due to wastewater is a serious issue that needs to be studied as many organic compounds are released from wastewater, affecting the ecosystem. Therefore, appropriate treatment methods should be used to prevent these effects. Phragmites australis biochar immobilized with bacteria was prepared in this study for use as an adsorbent in a pilot-scale up-flow anaerobic sludge blanket (UASB) to remove organic matter from wastewater in a buffalo farm. Combining reed biochar and immobilized Streptomyces hydrogenans introduces a synergistic effect: reed biochar serves as a substrate for microbial colonization and provides a conducive environment for microbial growth while Streptomyces hydrogenans, immobilized on the biochar, enhances the degradation of organic matter through its metabolic activities. Suitable techniques were employed, including infrared spectroscopy (FTIR) to determine the functional groups before and after adsorption, scanning electron microscopy (SEM) to determine the morphology of the composite before and after adsorption, X-ray diffraction (XRD) to examine the mineralogical changes through reflectometry, high-resolution diffraction and Brunauer-Emmett-Teller (BET) analyses to determine the surface area that always carried out by nitrogen adsorption/desorption technique based on the BET isotherm. Two-level factorial design experiments optimized using biochar, immobilized with bacteria, were employed to enhance the UASB performance. Chemical oxygen demand (COD) removal and biogas production were studied as a function of four experimental parameters: biochar dose, buffalo sludge dose, pH, and bacteria type. The buffalo sludge (manure) dose negatively affected the model's performance. The results showed better COD removal with Streptomyces hydrogenans S11 inoculation. The optimum biochar dose, buffalo sludge dose, and pH were 20 g L-1, 0%, and 7.5, respectively. The COD removal efficiency under these experimental conditions reached 92.70% with a biogas production of 5.0 mL. The experimental results of a validated point from the model were 90.80% for COD removal ratio and 4.80 mL for biogas production at 2 g L-1 biochar dose, 0% buffalo sludge dose, and pH 7.5 using Streptomyces hydrogenans S11 bacteria. A buffalo wastewater (BWW) anaerobic digestion experimental model was best fitted to the data under optimal conditions. This study aligns with the United Nations Sustainable Development Goals (SDGs), specifically SDG 6 (clean water and sanitation) and SDG 12 (responsible consumption and production). The implications of our work extend to large-scale applications, promising a greener and more sustainable future for wastewater treatment.

Simultaneous bioremediation of diesel-contaminated soil and water ecosystems using mixed culture of Acinetobacter baumannii IITG19 and Providencia vermicola IITG20

Diesel degradation and bacterial growth were investigated in soil, marine water, and freshwater ecosystems using Acinetobacter baumannii IITG19, Providencia vermicola IITG20, and their mixed culture. Both bacteria were found to be effective in all three ecosystems, with the best degradation occurring in freshwater. Acinetobacter baumannii IITG19 showed higher degradation (59%, 62%, and 76%) than Providencia vermicola IITG20 (31%, 57%, and 67%) in soil, marine water, and freshwater, respectively. Alkanes showed higher degradation than naphthenes and aromatics for both strains. The mixed culture showed higher diesel degradation efficiency than individual strains in all ecosystems. The overall degradation was similar in soil and marine water (66%), while freshwater showed the highest degradation of 81%. In the presence of the mixed culture, the degradation of alkanes was more than 90%. Bacterial growth was highest in freshwater and lowest in soil for both bacteria and the mixed culture. Metabolite analysis confirmed alcoholic degradation for alkanes and cyclo-alcoholic degradation for naphthenes. The degradation rate for mixed culture was higher than that of both the individual strains. The mixed culture had highest degradation rate constant in freshwater at 0.11 day-1 followed by that in marine ecosystem at 0.078 day-1. The rate constant was lowest for soil ecosystem at 0.066 day-1. Thus the mixed culture showed effectiveness in all three ecosystems, with its highest effectiveness observed in the freshwater ecosystem.

Effects of biochar immobilization of Serratia sp. F4 OR414381 on bioremediation of petroleum contamination and bacterial community composition in loess soil

Petroleum hydrocarbons pose a significant threat to human health and the environment. Biochar has increasingly been utilized for soil remediation. This study investigated the potential of biochar immobilization using Serratia sp. F4 OR414381 for the remediation of petroleum-contaminated soil through a pot experiment conducted over 90 days. The treatments in this study, denoted as IMs (maize straw biochar-immobilized Serratia sp. F4), degraded 82.5% of the total petroleum hydrocarbons (TPH), 59.23% of the aromatic, and 90.1% of the saturated hydrocarbon fractions in the loess soils. During remediation, the soil pH values decreased from 8.76 to 7.33, and the oxidation-reduction potential (ORP) increased from 156 to 229 mV. The treatment-maintained soil nutrients of the IMs were 138.94 mg/kg of NO3- -N and 92.47 mg/kg of available phosphorus (AP), as well as 11.29% of moisture content. The activities of soil dehydrogenase (SDHA) and catalase (CAT) respectively increased by 14% and 15 times compared to the CK treatment. Three key petroleum hydrocarbon degradation genes, including CYP450, AJ025, and xylX were upregulated following IMs treatment. Microbial community analysis revealed that a substantial microbial population of 1.01E+ 09 cells/g soil and oil-degrading bacteria such as Salinimicrobium, Saccharibacteria_genera_incertae_sedis, and Brevundimonas were the dominant genera in IMs treatment. This suggests that the biochar immobilized on Serratia sp. F4 OR414381 improves soil physicochemical properties and enhances interactions among microbial populations, presenting a promising and environmentally friendly approach for the stable and efficient remediation of petroleum-contaminated loess soil.

Biochar mediated high-rate anaerobic bioreactors: A critical review on high-strength wastewater treatment and management

Treatment of high-strength wastewater is critical for the aquatic environment and receiving water bodies around the globe. Untreated or partially treated high-strength wastewater may cause severe damage to the existing water bodies. Various high-rate anaerobic bioreactors have been developed in the last decades for treating high-strength wastewater. High-rate anaerobic bioreactors are effective in treating industrial wastewater and provide energy in the form of methane as well. However, the physical or chemical properties of high-strength industrial wastewater, sometimes, disrupt the functioning of a high-rate anaerobic bioreactor. For example, the disintegration of granular sludge in up flow anaerobic sludge blanket reactor or membrane blocking in an anaerobic membrane bioreactor are the results of a high-strength wastewater treatment which hamper the proper functioning and may harm the wastewater treatment plant economically. Biochar, if added to these bioreactors, may help to alleviate the ill-functioning of high-rate anaerobic bioreactors. The primary mechanisms by biochar work in these bioreactors are direct interspecies electron transfer, microbial immobilization, or gene level alternations in microbial structure. The present article explores and reviews the recent application of biochar in a high-rate anaerobic bioreactor treating high-strength industrial wastewater.

Advances from conventional to biochar enhanced biotreatment of dyeing wastewater: A critical review

DW (Dyeing wastewater) contains a large amount of dye organic compounds. A considerable proportion of dye itself or its intermediate products generated during wastewater treatment process exhibits CMR (Carcinogenic/Mutagenic/Toxic to Reproduction) toxicity. Compared with physicochemical methods, biological treatment is advantageous in terms of operating costs and greenhouse gas emissions, and has become the indispensable mainstream technology for DW treatment. This article reviews the adsorption and degradation mechanisms of dye organic compounds in wastewater and analyzed different biological processes, ranging from traditional methods to processes enhanced by biochar (BC). For traditional biological processes, microbial characteristics and communities were discussed, as well as the removal efficiency of different bioreactors. BC has adsorption and redox electron mediated effects, and coupling with biological treatment can further enhance the process of biosorption and degradation. Although BC coupled biological treatment shows promising dye removal, further research is still needed to optimize the treatment process, especially in terms of technical and economic competitiveness.

Techniques and mechanisms of bacteria immobilization on biochar for further environmental and agricultural applications

Bacteria immobilization on biochar is a promising approach to achieve high concentration and stability of microbial cells for several applications. The present review addressed the techniques utilized for bacteria immobilization on biochar, discussing the mechanisms involved in this process, as well as the further utilization in bioremediation and agriculture. This article presents three immobilization techniques, which vary according to their procedures and conditions, including cell growth, adsorption, and adaptation. The mechanisms for cell immobilization are primarily adsorption and biofilm formation on biochar. The favorable characteristics of biochar immobilization depend on the pyrolysis methods, raw materials, and properties of biochar, such as surface area, pore size, pH, zeta potential, hydrophobicity, functional groups, and nutrients. Scanning electron microscope (SEM) and colony forming unit (CFU) are the analyses commonly carried out to verify the efficiency of bacteria immobilization. The benefits of applying biochar-immobilized bacteria include soil decontamination and quality improvement, which can improve plant growth and crop yield. Therefore, this emerging technology represents a promising solution for environmental and agricultural purposes. However, it is important to evaluate the potential adverse impacts on native microbiota by introducing exogenous microorganisms.

Adsorption characterization of tetracycline antibiotics on alkali-functionalized rice husk biochar and its evaluation on phytotoxicity to seed germination

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

Antimicrobial resistance and biotechnological potential of plastic-associated bacteria isolated from an urban estuary

Plastics have quickly become one of the major pollutants in aquatic environments worldwide and solving the plastic pollution crisis is considered a central goal of modern society. In this study, 10 different plastic samples, including high- and low-density polyethylene and polypropylene, were collected from a deeply polluted urban estuary in Brazil. By employing different isolation and analysis approaches to investigate plastic-associated bacteria, a predominance of potentially pathogenic bacteria such as Acinetobacter, Aeromonas, and Vibrio was observed throughout all plastic samples. Bacteria typically found in the aquatic environment harboured clinically relevant genes encoding resistance to carbapenems (blaKPC ) and colistin (such as mcr-3 and mcr-4), along with genetic determinants associated with potentially active gene mobilization. Whole genome sequencing and annotation of three plastic-associated Vibrio strains further demonstrated the carriage of mobile genetic elements and antimicrobial resistance and virulence genes. On the other hand, bacteria isolated from the same samples were also able to produce esterases, lipases, and bioemulsifiers, thus highlighting that the plastisphere could also be of special interest from a biotechnological perspective.

Recent progress in the production and application of biochar and its composite in environmental biodegradation

Over the past few decades, extensive research has been conducted to develop cost-effective and high-quality biochar for environmental biodegradation purposes. Pyrolysis has emerged as a promising method for recovering biochar from biomass and waste materials. This study provides an overview of the current state-of-the-art biochar production technology, including the advancements and biochar applications in organic pollutants remediation, particularly wastewater treatment. Substantial progress has been made in biochar production through advanced thermochemical technologies. Moreover, the review underscores the importance of understanding the kinetics of pollutant degradation using biochar to maximize its synergies for potential environmental biodegradation. Finally, the study identifies the technological gaps and outlines future research advancements in biochar production and its applications for environmental biodegradation.

Simultaneous immobilization enhances synergistic interactions and crude oil removal of bacterial consortium

Oil spillage has serious adverse effects on marine environments. The degradation of crude oil by microorganisms may be an effective and sustainable approach. In this study, the removal of crude oil from seawater by immobilized bacterial consortium was performed and the enhancement of crude oil degradation efficiency by varying immobilization methods and inoculum volume ratio was examined. The nonpathogenic and heavy metal-tolerant bacterial consortium of Sphingobium naphthae MO2-4 and Priestia aryabhattai TL01-2 was immobilized by biofilm formation on aquaporousgels. The simultaneous immobilization of strains MO2-4 and TL01-2 showed better crude oil removal efficiency than independent immobilization, which indicated positive interactions among consortium members in the mixed-culture immobilized systems. Moreover, the immobilized consortium at a 2:1 (MO2-4:TL01-2) inoculum volume ratio showed the best crude oil removal capacity. The immobilized consortium removed 77% of 2000 mg L-1 crude oil in seawater over 7 days. The immobilized consortium maintained crude oil removal efficacy in semicontinuous experiments. In addition, the immobilized consortium was used to remediate seawater contaminated with 1000 mg L-1 crude oil in a 20 L wave tank. After 28 days, the crude oil degradation efficiency of immobilized consortium was approximately 70%, and crude oil degradation through natural attenuation was not observed. Moreover, the genomic features of strains MO2-4 and TL01-2 are reported. Genomic analyses of both strains confirmed the presence of many genes involved in hydrocarbon degradation, heavy metal resistance, biosurfactant synthesis, and biofilm formation, supporting the biodegradation results and characterizing strain properties. The results of this work introduce the potential benefit of simultaneous immobilization of bacterial consortia to improve efficiency of crude oil biodegradation and has motivated further investigations into large-scale remediation of crude oil-contaminated seawater.

Biotechnological potential of microbial bio-surfactants, their significance, and diverse applications

Globally, there is a huge demand for chemically available surfactants in many industries, irrespective of their detrimental impact on the environment. Naturally occurring green sustainable substances have been proven to be the best alternative for reducing reliance on chemical surfactants and promoting long-lasting sustainable development. The most frequently utilized green active biosurfactants, which are made by bacteria, yeast, and fungi, are discussed in this review. These biosurfactants are commonly originated from contaminated sites, the marine ecosystem, and the natural environment, and it holds great potential for environmental sustainability. In this review, we described the importance of biosurfactants for the environment, including their biodegradability, low toxicity, environmental compatibility, and stability at a wide pH range. In this review, we have also described the various techniques that have been utilized to characterize and screen the generation of microbial biosurfactants. Also, we reviewed the potential of biosurfactants and its emerging applications in the foods, cosmetics, pharmaceuticals, and agricultural industries. In addition, we also discussed the ways to overcome problems with expensive costs such as low-cost substrate media formulation, gravitational techniques, and solvent-free foam fractionation for extraction that could be employed during biosurfactant production on a larger scale.

Biotransformation of sulfamethoxazole by newly isolated surfactant-producing strain Proteus mirabilis sp. ZXY4: Removal efficiency, pathways, and mechanisms

In this study, the SMX degrading strain Proteus mirabilis sp. ZXY4 with surfactant manufacturing potential was isolated from sludge utilizing blood agar and CTAB agar plate. FTIR analysis indicated that the biosurfactant generated by strain ZXY4 was glycolipid. 3D-EEM demonstrated that SMX biodegradation was strongly connected to biosurfactants, the synergistic effect of biodegradation and biosurfactant made strain ZXY4 have excellent SMX degradation performance. Under the optimal conditions of inoculation dosage of 15%, temperature of 30 ℃, pH of 7 and initial SMX concentration of 5 mg L^-1, strain ZXY4 could completely degrade SMX within 24 h. SMX biodegrades at low concentrations (less than5 mg L^-1) followed by the zero-order kinetic model, high concentration (>5 mg L^-1) is more consistent with the first-order kinetic model. LC-MS analysis revealed 14 SMX degradation intermediates, and five potential biodegradation mechanisms were postulated. The findings provide new insights into the biodegradation of SMX.

Does Caulerpa prolifera with Its Bacterial Coating Represent a Promising Association for Seawater Phytoremediation of Diesel Hydrocarbons?

Anthropic diesel-derived contamination of Mediterranean coastal waters is of great concern. Nature-based solutions such as phytoremediation are considered promising technologies to remove contaminants from marine environments. The aim of this work was to investigate the tolerance of the Mediterranean autochthonous seaweed Caulerpa prolifera (Forsskal) Lamouroux to diesel fuel and its hydrocarbon degradation potential. Changes in C. prolifera traits, including its associated bacterial community abundance and structure, were determined by fluorescence microscopy and next-generation sequencing techniques. Thalli of C. prolifera artificially exposed to increasing concentration of diesel fuel for 30 days and thalli collected from three natural sites with different levels of seawater diesel-derived hydrocarbons were analysed. Gas chromatography was applied to determine the seaweed hydrocarbon degradation potential. Overall, in controlled conditions the lower concentration of diesel (0.01%) did not affect C. prolifera survival and growth, whereas the higher concentration (1%) resulted in high mortality and blade damages. Similarly, only natural thalli, collected at the most polluted marine site (750 mg L^-1), were damaged. A higher abundance of epiphytic bacteria, with a higher relative abundance of Vibrio bacteria, was positively correlated to the health status of the seaweed as well as to its diesel-degradation ability. In conclusion, C. prolifera tolerated and degraded moderate concentrations of seawater diesel-derived compounds, especially changing the abundance and community structure of its bacterial coating. The protection and exploitation of this autochthonous natural seaweed-bacteria symbiosis represents a useful strategy to mitigate the hydrocarbon contamination in moderate polluted Mediterranean costal environments.

More effective application of biochar-based immobilization technology in the environment: Understanding the role of biochar

In recent years, biochar-based immobilization technology (BIT) has been widely used to treat different environmental issues because of its cost-effectiveness and high removal performance. However, the complexity of the real environment is always ignored, which hinders the transfer of the BIT from lab-scale to commercial applications. Therefore, in this review, the analysis is performed separately on the internal side of the BIT (microbial fixation and growth) and on the external side of the BIT (function) to achieve effective BIT performance. Importantly, the internal two stages of BIT have been discussed concisely. Further, the usage of BIT in different areas is summarized precisely. Notably, the key impacts were systemically analyzed during BIT applications including environmental conditions and biochar types. Finally, the suggestions and perspectives are elucidated to solve current issues regarding BIT.

Enhanced remediation of oil-contaminated intertidal sediment by bacterial consortium of petroleum degraders and biosurfactant producers

Oil pollution in intertidal zones is an important environmental issue that has serious adverse effects on coastal ecosystems. This study investigated the efficacy of a bacterial consortium constructed from petroleum degraders and biosurfactant producers in the bioremediation of oil-polluted sediment. Inoculation of the constructed consortium significantly enhanced the removal of C₈-C₄₀n-alkanes (80.2 ± 2.8% removal efficiency) and aromatic compounds (34.4 ± 10.8% removal efficiency) within 10 weeks. The consortium played dual functions of petroleum degradation and biosurfactant production, greatly improving microbial growth and metabolic activities. Real-time quantitative polymerase chain reaction (PCR) showed that the consortium markedly increased the proportions of indigenous alkane-degrading populations (up to 3.88-times higher than that of the control treatment). Microbial community analysis demonstrated that the exogenous consortium activated the degradation functions of indigenous microflora and promoted synergistic cooperation among microorganisms. Our findings indicated that supplementation of a bacterial consortium of petroleum degraders and biosurfactant producers is a promising bioremediation strategy for oil-polluted sediments.

Biochar-immobilized Bacillus spp. for heavy metals bioremediation: A review on immobilization techniques, bioremediation mechanisms and effects on soil

Heavy metals contamination present risks to ecosystems and human health. Bioremediation is a technology that has been applied to minimize the levels of heavy metals contamination. However, the efficiency of this process varies according to several biotic and abiotic aspects, especially in environments with high concentrations of heavy metals. Therefore, microorganisms immobilization in different materials, such as biochar, emerges as an alternative to alleviate the stress that heavy metals have on microorganisms and thus improve the bioremediation efficiency. In this context, this review aimed to compile recent advances in the use of biochar as a carrier of bacteria, specifically Bacillus spp., with subsequent application for the bioremediation of soil contaminated with heavy metals. We present three different techniques to immobilize Bacillus spp. on biochar. Bacillus strains are capable of reducing the toxicity and bioavailability of metals, while biochar is a material that serves as a shelter for microorganisms and also contributes to bioremediation through the adsorption of contaminants. Thus, there is a synergistic effect between Bacillus spp. and biochar for the heavy metals bioremediation. Biomineralization, biosorption, bioreduction, bioaccumulation and adsorption are the mechanisms involved in this process. The application of biochar-immobilized Bacillus strains results in beneficial effects on the contaminated soil, such as the reduction of toxicity and accumulation of metals in plants, favoring their growth, in addition to increasing microbial and enzymatic activity in soil. However, competition and reduction of microbial diversity and the toxic characteristics of biochar are reported as negative impacts of this strategy. More studies using this emerging technology are essential to improve its efficiency, to elucidate the mechanisms and to balance positive and negative impacts, especially at the field scale.

Continuous bioreactors enable high-level bioremediation of diesel-contaminated seawater at low and mesophilic temperatures using Antarctic bacterial consortia: Pollutant analysis and microbial community composition

In 2020, more than 21,000 tons of diesel oil were released accidently into the environment with most of it contaminating water bodies. There is an urgent need for sustainable technologies to clean up rivers and oceans to protect wildlife and human health. One solution is harnessing the power of bacterial consortia; however isolated microbes from different environments have shown low diesel bioremediation rates in seawater thus far. An outstanding question is whether Antarctic microorganisms that thrive in environments polluted with hydrocarbons exhibit better diesel degrading activities when propagated at higher temperatures than those encountered in their natural ecosystems. Here, we isolated bacterial consortia, LR-30 (30 °C) and LR-10 (10 °C), from the Antarctic rhizosphere soil of Deschampsia antarctica (Livingston Island), that used diesel oil as the only carbon substrate. We found that LR-30 and LR-10 batch bioreactors metabolized nearly the entire diesel content when the initial concentration was 10 (g/L) in seawater. Increasing the initial diesel concentration to 50 gDiesel/L, LR-30 and LR-10 bioconverted 33.4 and 31.2 gDiesel/L in 7 days, respectively. The 16S rRNA gene sequencing profiles revealed that the dominant bacterial genera of the inoculated LR-30 community were Achromobacter (50.6%), Pseudomonas (25%) and Rhodanobacter (14.9%), whereas for LR-10 were Pseudomonas (58%), Candidimonas (10.3%) and Renibacterium (7.8%). We also established continuous bioreactors for diesel biodegradation where LR-30 bioremediated diesel at an unprecedent rate of (34.4 g/L per day), while LR-10 achieved (24.5 g/L per day) at 10 °C for one month. The abundance of each bacterial genera present significantly fluctuated at some point during the diesel bioremediation process, yet Achromobacter and Pseudomonas were the most abundant member at the end of the batch and continuous bioreactors for LR-30 and LR-10, respectively.

Exploring the PAHs dissipation and indigenous bacteria response in soil amended with two different microbial inoculants

This study investigated the bioremediation of PAHs in soil by two different microbial inoculants prepared with Paracoccus aminovorans HPD-2 and the carrier humic acid (HA) or montmorillonite (Mont). After incubation for 42 d, the greatest removal of PAHs, 42.8 % or 41.6 %, was observed in microcosms with 0.2 % HA inoculant or 2 % Mont inoculant. The PAH removal efficiency in these treatments was significantly greater than that in soil amended only with planktonic HPD-2. Bacterial community analysis showed that the survival of Paracoccus aminovorans was enhanced in the treatments with Mont inoculant compared with the treatments with HA inoculant or with HPD-2 alone. Moreover, the diversity of PAH-degrading bacterial genera was greater in the treatments containing Mont inoculant than in the treatments containing HA inoculant. These results indicate that the organic material HA and inorganic material Mont promote PAH removal in different ways. Specifically, HA promotes PAHs bioavailability to accelerate the degradation of PAHs in soil, whereas Mont protects PAH-degrading microorganisms to promote pollutant removal. Overall, the findings suggest that HA and Mont are promising materials for microbial immobilization for the bioremediation of PAH-contaminated soil.

Pseudomonas stutzeri Immobilized Sawdust Biochar for Nickel Ion Removal

Nickel ions generated from the electroplating industry and stainless steel and battery manufacturing industries contribute to water pollution, harm human health, and pose environmental risks. A long-term, sustainable, and efficient treatment method should be developed to address this issue. Bioremediation in the presence of biochar and microorganisms is a potential approach for metal ion abatement. This study evaluates the feasibility of Pseudomonas stutzeri immobilized sawdust biochar (PSDB) for Ni2+ removal. Sawdust biochar was prepared by pyrolyzing in a muffle furnace and was characterized using SEM, FTIR, and BET. The influence of biochar preparation parameters such as pyrolysis temperature, time on biochar yield, and impact on cell immobilization was investigated. The effect of various parameters, such as incubation time, pH, temperature, and biocatalyst dosage, was studied. The total Ni2+ in solution was analyzed using inductively coupled plasma optical emission spectrometry. PSDB showed an 83% Ni2+ removal efficiency and reusability up to three cycles. FT-IR analysis revealed that the mechanism of Ni2+ removal by PSDB was the synergistic effect of adsorption by biochar and bioaccumulation by P. stutzeri. This study presents a novel approach for environmental application by utilizing waste biomass-derived biochar as a carrier support for bacteria and an adsorbent for pollutants.

A review of the role of biosurfactants in the biodegradation of hydrophobic organopollutants: production, mode of action, biosynthesis and applications

The increasing influence of human activity and industrialization has adversely impacted the environment via pollution with organic contaminants, which are minimally soluble in water. These hydrophobic organopollutants may be present in sediment, water or biota and have created concern due to their toxic effects in mammals. The ability of microorganisms to degrade pollutants makes their use the most effective, inexpensive and ecofriendly method for environmental remediation. Microorganisms have the ability to produce natural surfactants (biosurfactants) that increase the bioavailability of hydrophobic organopollutants, which enables their use as carbon and energy sources. Due to microbial diversity in production, and the biodegradability, nontoxicity, stability and specific activity of the surfactants, the use of microbial surfactants has the potential to overcome problems associated with contamination by hydrophobic organopollutants.This review provides an overview of the current state of knowledge regarding microbial surfactant production, mode of action in the biodegradation of hydrophobic organopollutants and biosynthetic pathways as well as their applications using emergent strategy tools to remove organopollutants from the environment. It is also specified for the first time that biosurfactants are produced either as growth-associated products or secondary metabolites, and are produced in different amounts by a wide range of microorganisms.

Biochar-microorganism interactions for organic pollutant remediation: Challenges and perspectives

Numerous harmful chemicals are introduced every year in the environment through anthropogenic and geological activities raising global concerns of their ecotoxicological effects and decontamination strategies. Biochar technology has been recognized as an important pillar for recycling of biomass, contributing to the carbon capture and bioenergy industries, and remediation of contaminated soil, sediments and water. This paper aims to critically review the application potential of biochar with a special focus on the synergistic and antagonistic effects on contaminant-degrading microorganisms in single and mixed-contaminated systems. Owing to the high specific surface area, porous structure, and compatible surface chemistry, biochar can support the proliferation and activity of contaminant-degrading microorganisms. A combination of biochar and microorganisms to remove a variety of contaminants has gained popularity in recent years alongside traditional chemical and physical remediation technologies. The microbial compatibility of biochar can be improved by optimizing the surface parameters so that toxic pollutant release is minimized, biofilm formation is encouraged, and microbial populations are enhanced. Biocompatible biochar thus shows potential in the bioremediation of organic contaminants by harboring microbial populations, releasing contaminant-degrading enzymes, and protecting beneficial microorganisms from immediate toxicity of surrounding contaminants. This review recommends that biochar-microorganism co-deployment holds a great potential for the removal of contaminants thereby reducing the risk of organic contaminants to human and environmental health.

Application of biochar immobilized microorganisms for pollutants removal from wastewater: A review

Microbial immobilization technology (MIT) has been rapidly developed and used to remove pollutants from water/wastewater in recent years, owing to its high stability, rapid reaction rate, and high activity. Microbial immobilization carrier with low cost and high removal efficiency is the key of MIT. Biochar is considered to be an efficient carrier for microbial immobilization because of its high porosity and good adsorption effect, which can provide a habitat for microorganisms. The use of biochar immobilized microorganisms to treat different pollutants in wastewater is a promising treatment method. Compared with the other biological treatment technology, biochar immobilized microorganisms can improve microbial abundance, repeated utilization ratio, microbial metabolic capacity, etc. However, current research on this method is still in its infancy. Little attention has been paid to the interaction mechanisms between biochar and microorganisms, and many studies are only carried out in the laboratory. There are still problems such as difficult recovery after use and secondary pollution caused by residual pollutants after biochar adsorption, which need further clarification. To have comprehensive digestion and an in-depth understanding of biochar immobilized microorganisms technology in wastewater treatment, the wastewater treatment methods based on biochar are firstly summarized in this review. Then the mechanisms of immobilized microorganisms were explored, and the applications of biochar immobilized microorganisms in wastewater were systematically reviewed. Finally, suggestions and perspectives for future research and practical application are put forward.

Recent advances of biosurfactant for waste and pollution bioremediation: Substitutions of petroleum-based surfactants

Biosurfactant is one of the emerging compounds in the industrial sector that behaves similarly with their synthetic counterparts, as they can reduce surface and interfacial tension between two fluids. Their unique properties also enable biosurfactant molecules to be able to clump together to form micelles that can capture targeted molecules within a solution. Biosurfactants are compared with synthetic surfactants on various applications for which the results shows that biosurfactants are fully capable of replacing synthetic surfactants in applications including enhanced oil recovery and wastewater treatment applications. Biosurfactants are able to be used in different applications as well since they are less toxic than synthetic surfactants. These applications include bioremediation on oil spills in the marine environment and bioremediation for contaminated soil and water, as well as a different approach on the pharmaceutical applications. The future of biosurfactants in the pharmaceutical industry and petroleum industry as well as challenges faced for implementing biosurfactants into large-scale applications are also discussed at the end of this review.

Enhanced remediation of fracturing flowback fluids by the combined application of a bioflocculant/biosurfactant-producing Bacillus sp. SS15 and its metabolites

Fracturing flowback fluids (FFFs), which is generated from the process of oil and gas exploitation, is one of the major environmental concerns. In this study, a bacterial strain, Bacillus sp. SS15, capable of producing both bioflocculant (BF) and biosurfactant (BS), was isolated from oil-contaminated mudflat sediment. The BS produced by SS15 was identified as lipopeptide, which could reduce the surface tension of water from 74.2 mN/m to 36.6 mN/m with a critical micelle concentration of 44.4 mg/L. It also exhibited strong tolerance against a wide range of pH (2-12), temperature (4-60 °C), and salinity (0-100 g/L). Meanwhile, the BF produced by SS15 exhibited high flocculating activity (84.9%) for kaolin suspension, and was confirmed to be thermostable, salt-tolerant, and alkaliphilic. The combined treatment of bioremediation (introducing SS15 and BS) followed by flocculation (introducing BF) greatly promoted the removal of chroma (85.7% reduction), suspended solids (94.4% reduction), chemical oxygen demand (84.9% reduction), n-alkanes (50.0% reduction), and polycyclic aromatic hydrocarbons (66.5% reduction), respectively. The genome analysis showed that strain SS15 possessed abundant genes related to the synthesis of carbohydrate, protein, and lipid, which might play an important role in BF and BS synthesis. The findings in this study demonstrated that Bacillus sp. SS15 has promising prospect in the remediation of FFFs.

Recent advances in nanoremediation: Carving sustainable solution to clean-up polluted agriculture soils

Agriculture is one of the foremost significant human activities, which symbolizes the key source for food, fuel and fibers. This activity results in a lot of ecological harms particularly with the excessive usage of chemical fertilizers and pesticides. Different agricultural practices have remained industrialized to advance food production, due to the growth in the world population and to meet the food demand through the routine use of more effective fertilizers and pesticides. Soil is intensely embellished by environmental contamination and it can be stated as "universal incline." Soil pollution usually occurs from sewage wastes, accidental discharges or as byproducts of chemical residues of unrestrained production of numerous materials. Soil pollution with hazardous materials alters the physical, chemical, and biological properties, causing undesirable changes in soil fertility and ecosystem. Engineered nanomaterials offer various solutions for remediation of contaminated soils. Engineered nanomaterial-enable technologies are able to prevent the uncontrolled release of harmful materials into the environment along with capabilities to combat soil and groundwater borne pollutants. Currently, nanobiotechnology signifies a hopeful attitude to advance agronomic production and remediate polluted soils. Studies have outlined the way of nanomaterial applications to restore the eminence of the environment and assist the detection of polluted sites, along with potential remedies. This review focuses on the latest developments in agricultural nanobiotechnology and the tools developed to combat soil or land and or terrestrial pollution, as well as the benefits of using these tools to increase soil fertility and reduce potential toxicity.

Rhamnolipids produced under aerobic/anaerobic conditions: Comparative analysis and their promising applications

This research comprises a comparative study of the properties, rhl genes expression, and structural difference in rhamnolipids produced under different oxygen conditions via Pseudomonas sp. CH1. The critical micelle concentration (CMC) of rhamnolipids produced under aerobic conditions (RAO) was 100 mg/L. In contrast, rhamnolipids produced under anaerobic conditions (RNO) had a low CMC of 40 mg/L. RNO comprised six rhamnolipids homologs, and the proportion of mono-rhamnolipids was up to 87.83%; meanwhile, the percent ratio of di-rhamnolipids and mono-rhamnolipids in RAO was 63.1:36.9. Additionally, diversified applications for solubilization of hydrophobic pollutants and reduction in heavy oil viscosity were investigated. The addition of RNO greatly enhanced the solubility of phenanthrene in water, from 1.29 mg/L to 193.14 mg/L, a 148.7-fold increase. Moreover, the viscosity of heavy oil decreased by over 90% for both kinds of rhamnolipids, whereas RAO effectively reduced the viscosity even at a low temperature (10 °C). The findings of this study provide insights into the versatile potential applications of rhamnolipids produced under different oxygen conditions.

A biosurfactant-producing yeast Rhodotorula sp.CC01 utilizing landfill leachate as nitrogen source and its broad degradation spectra of petroleum hydrocarbons

Biosurfactants (BSs) are known for their remarkable properties, however, their commercial applications are hampered partly by the high production cost. To overcome this issue, a biosurfactant producing strain, Rhodotorula sp.CC01 was isolated using landfill leachate as nitrogen source, while olive oil was determined as the best sole carbon source. The BS produced by Rhodotorula sp.CC01 had oil displacement diameter of 19.90 ± 0.10 cm and could reduce the surface tension of water to 34.77 ± 0.63 mN/m. It was characterized as glycolipids by thin layer chromatography, FTIR spectra, and GC-MS analysis, with the critical micelle concentration of 70 mg/L. Meanwhile, the BS showed stability over a wide range of pH (2-12), salinity (0-100 g/L), and temperature (20-100 °C). During the cultivation process, BS was produced with a maximum rate of 163.33 mg L^-1 h^-1 and a maximum yield of 1360 mg/L at 50 h. In addition, the removal efficiency of NH₄⁺-N reached 84.2% after 75 h cultivation with a maximum NH₄⁺-N removal rate of 3.92 mg L^-1 h^-1. Moreover, Rhodotorula sp.CC01 has proven to be of great potential in remediating petroleum hydrocarbons, as revealed by chromogenic assays. Furthermore, genes related to nitrogen metabolism and glycolipid metabolism were found in this strain CC01 after annotating the genome data with KEGG database, such as narB, glycoprotein glucosyltransferase, acetyl-CoA C-acetyltransferase, LRA1, LRA3, and LRA4. The findings of this study prove a cost-effective strategy for the production of BS by yeast through the utilization of landfill leachate.

Improved degradation of petroleum hydrocarbons by co-culture of fungi and biosurfactant-producing bacteria

Microbial remediation has proven to be an effective technique for the cleanup of crude-oil contaminated sites. However, limited information exists on the dynamics involved in defined co-cultures of biosurfactant-producing bacteria and fungi in bioremediation processes. In this study, a fungal strain (Scedosporium sp. ZYY) capable of degrading petroleum hydrocarbons was isolated and co-cultured with biosurfactant-producing bacteria (Acinetobacter sp. Y2) to investigate their combined effect on crude-oil degradation. Results showed that the surface tension of the co-culture decreased from 63.12 to 47.58 mN m^-1, indicating the secretion of biosurfactants in the culture. Meanwhile, the degradation rate of total petroleum hydrocarbon increased from 23.36% to 58.61% at the end of the 7-d incubation period. In addition, gas chromatography - mass spectrometry analysis showed a significant (P < 0.05) degradation from 3789.27 mg/L to 940.33 mg/L for n-alkanes and 1667.33 μg/L to 661.5 μg/L for polycyclic aromatic hydrocarbons. Moreover, RT-qPCR results revealed the high expression of alkB and CYP52 genes by Acinetobacter sp. Y2 and Scedosporium sp. ZYY respectively in the co-culture, which corelated positively (P < 0.01) with n-alkane removal. Finally, microbial growth assay which corresponded with Fluorescein diacetate hydrolysis activity, highlighted the synergistic behavior of both strains in tackling the crude oil. Findings in this study suggest that the combination of fungal strain and biosurfactant-producing bacteria effectively enhances the degradation of petroleum hydrocarbons, which could shed new light on the improvement of bioremediation strategies.

Analyses of community structure and role of immobilized bacteria system in the bioremediation process of diesel pollution seawater

Immobilized bacteria system plays an important role during degradation process in oil contaminated seawater. Although the immobilized bacteria system can be recycled to avoid pollution after remediation, it remains an open question on whether or not the secondary pollution occurs during the degradation process. Additionally, the research on the role of immobilized bacteria system in the process of oil removal is not clear enough. In this study, both the diesel degradation rate of diesel by immobilized bacteria system and changes in marine microbial community structure were determined to explore the role of immobilized bacteria system. The immobilized bacteria system was added to the diesel polluted seawater (1% diesel) for 30 days. The degradation performance was investigated during the process, and the microbial community structure was analyzed simultaneously. The results illustrated that the degradation rate of diesel by immobilized bacteria system reached 78.39% after 30 days, and Alcanivorax (59.09%), Achromobacter (24.34%) and Thalassospira (9.84%) were the dominant genera in the immobilized bacteria system. The addition of immobilized bacteria system increased the content of nitrogen and phosphorus, and then promoted the growth of oil-degrading bacteria. Thus, functional genes related to oil degradation increased. Additionally, there was little difference in the microbial composition between the treated seawater and the unpolluted seawater. Based on all results, it can be inferred that immobilized bacteria system triggered and stimulated diesel degradation process. This study provides a promising way to improve the removal of oil, and provides theoretical support for the wide application of immobilized microorganism technology.