Humification and maturation of kitchen waste during indoor composting by individual households

A novel method for production of nitrogen fertilizer with low energy consumption by efficiently adsorbing and separating waste ammonia

Recovering waste NH3 to be used as a source of nitrogen fertilizer or liquid fuel has recently attracted much attention. Current methods mainly utilize activated carbon or metal-organic frameworks to capture NH3, but are limited due to low NH3 adsorption capacity and high cost, respectively. In this study, novel porous materials that are low cost and easy to synthesize were prepared as NH3 adsorbents by precipitation polymerization with acid optimization. The results showed that adsorption sites (‒COOH, -OH, and lactone) which form chemical adsorption or hydrogen bonds with NH3 were successfully regulated by response surface methods. Correspondingly, the dynamic NH3 adsorption capacity increased from 5.45 mg g-1 to 129 mg g-1, which is higher than most known activated carbon and metal-organic frameworks. Separation performance tests showed that NH3 could also be separated from CO2 and CH4. The findings in this study will advance the industrialization of NH3 polymer adsorbents and provide technical support for the recycling of waste NH3.

Effects of Fe3O4 NMs based Fenton-like reactions on biodegradable plastic bags in compost: New insight into plastisphere community succession, co-composting efficiency and free radical in situ aging theory

Biodegradable plastic bags (BPBs), meant for eco-friendly, often inadequately degrade in compost, leading to microplastic pollution. In this study, the effect of Fenton-like reaction with Fe3O4 nanoparticles (NMs) on the plastisphere microorganisms' evolution and the BPBs' aging mechanism was revealed by co-composting of food waste with BPBs for 40 days. The establishment of the Fenton-like reaction was confirmed, with the addition of Fenton-like reagent treatments resulting in an increase of 57.67% and 37.75% in H2O2 levels during the composting, compared to the control group. Moreover, the structural characterization reveals that increasing oxygen content continuously generates reactive free radicals on the surface, leading to the formation of oxidative cavities. This process results in random chain-breaking, significantly reducing molecular weights by 39.27% and 38.81%, thus showcasing a deep-seated transformation in the plastic's molecular structure. Furthermore, the microbial network suggested that the Fenton-like reaction enriched plastisphere keystone species, thus accelerating the BPBs' aging. Additionally, the Fenton-like reaction improved compost maturity and reduced greenhouse gas emissions. These results reveal the bio-chemical mechanisms of BPBs aging and random chain-breaking by the Fenton-like reaction, under alternating oxidative/anoxic conditions of composting and provide a new insight to resolve the BPBs' pollutions.

Plant-derived biochar amendment for compost maturity improvement and gaseous emission reduction in food waste composting: Insight from bacterial community and functions

This study assessed the impact of different plant-derived biochar (cornstalk, rice husk, and sawdust) on bacterial community and functions for compost maturity and gaseous emissions during the composting of food waste. Results showed that all biochar strengthened organic biotransformation and caused a higher germination index on day 12 (over 100%), especially for rice husk biochar to enhance the growth of Thermobifida related to aerobic chemoheterotrophy. Rice husk biochar also achieved a relatively higher reduction efficiency of methane (85.8%) and ammonia (82.7%) emissions since its greater porous structure. Besides, the growth of Pseudomonas, Pusillimonas, and Desulfitibacter was restricted to constrict nitrate reduction, nitrite respiration, and sulfate respiration by optimized temperature and air permeability, thus reducing nitrous oxide and hydrogen sulfide emissions by 48.0-57.3% by biochar addition. Therefore, rice husk biochar experienced the optimal potential for maturity increment and gaseous emissions mitigation.

Disparities and mechanisms of carbon and nitrogen conversion during food waste composting with different bulking agents

The low C/N ratio, high moisture content, and low porosity of food waste require the addition of bulking agents for adjustment during the composting process. However, the effect and mechanism of different bulking agents on the reduction of carbon and nitrogen losses are unclear. Therefore, this study conducted experiments to evaluate and clarify the differences in carbon and nitrogen transformation between sawdust, rice husk and wheat bran in food waste composting. The results showed that the addition of bulking agents promoted the conversion of carbon and nitrogen into total organic carbon (TOC) and total organic nitrogen (TON) rather than CO2 and NH3. The carbon and nitrogen losses were reduced by 16.00-25.71% and 11.56-29.54%, respectively. Notably, the Sawdust group exhibited the highest carbon retention, whereas the Wheat_bran group demonstrated superior nitrogen retention. The succession of bacterial communities showed that sawdust enhanced the cellulolysis and xylanolysis functions while wheat bran promoted nitrogen fixation. Correlation analysis was further employed to speculate on potential interactions among carbon and nitrogen components. The incorporation of sawdust and rice husk improved humification partly due to the addition of lignocellulose and the accumulation of total dissolved nitrogen (DTN) in the substrate, respectively. In the process of ammonia assimilation, the addition of wheat bran promoted the accumulation of dissolved organic carbon (DOC), contributing to the synthesis of TON to a degree. These findings offer cost-effective strategies for conserving carbon and nitrogen from loss in food waste composting by selecting suitable bulking agents, ultimately producing high-quality fertilizer.

A review of the definition, influencing factors, and mechanisms of rapid composting of organic waste

Composting is a traditional method of treating organic waste. A growing number of studies have been focusing on accelerating the process to achieve "rapid composting." However, the specific definition and influencing factors of rapid composting remain unclear. Therefore, we aimed to gather more insight into the features of rapid composting by reviewing the literature concerning organic waste composting published in the Web of Science database in the past 5 years. We selected 1615 sample studies with "composting" as the subject word and analyzed the effective composting time stated in each study. We defined rapid composting within 15 days using the median test and quartile method. Based on this definition, we summarized the influencing factors of "rapid composting," namely materials, reactors, temperature, and microorganisms. Finally, we summarized two mechanisms related to humus formation during organic waste rapid composting: high temperature-promoting maturation and microbial driving mechanisms. This literature review compiled useful references to help promote the development of rapid composting technology and related equipment.

Optimization of free air space to regulate bacterial succession and functions for alleviating gaseous emissions during kitchen waste composting

This study investigated the effects of free air space (FAS) (45%, 55%, 65%) on bacterial dynamics for gaseous emissions during kitchen waste composting. Results show that FAS increase from 45% to 65% elevated oxygen diffusivity to inhibit bacteria for fermentation (e.g. Caldicoprobacter and Ruminofilibacter) to reduce methane emission by 51%. Moreover, the increased FAS accelerated heat loss to reduce temperature and the abundance of thermophiles (e.g. Thermobifida and Thermobacillus) for aerobic chemoheterotrophy to mitigate ammonia emission by 32%. Nevertheless, the reduced temperature induced the growth of Desulfitibacter and Desulfobulbus for sulfate/sulfite respiration to boost hydrogen sulphide emission. By contrast, FAS at 55% achieved the highest germination index and favored the proliferation of nitrifiers and denitrifiers (e.g. Roseiflexus and Steroidobacter) to improve nitrate availability, thus slightly enhancing nitrous oxide emission. Thus, FAS at 55% exhibits the optimal performance for gaseous emission reduction and maturity enhancement in kitchen waste composting.

Magnetic Carbon Quantum Dots/Iron Oxide Composite Based on Waste Rice Noodle and Iron Oxide Scale: Preparation and Photocatalytic Capability

To provide an economical magnetic photocatalyst and introduce an innovative approach for efficiently utilizing discarded waste rice noodle (WRN) and iron oxide scale (IOS), we initially converted WRN into carbon quantum dots (CQDs) using a hydrothermal method, simultaneously calcining IOS to obtain iron oxide (FeOx). Subsequently, we successfully synthesized a cost-effective, magnetic CQDs/FeOx photocatalytic composite for the first time by combining the resulting CQDs and FeOx. Our findings demonstrated that calcining IOS in an air atmosphere enhanced the content of photocatalytically active α-Fe2O3, while incorporating WRN-based CQDs into FeOx improved the electron-hole pair separation, resulting in increased O2 reduction and H2O oxidation. Under optimized conditions (IOS calcination temperature: 300 °C; carbon loading: 11 wt%), the CQDs/FeOx composite, utilizing WRN and IOS as its foundation, exhibited exceptional and reusable capabilities in photodegrading methylene blue and tetracycline. Remarkably, for methylene blue, it achieved an impressive degradation rate of 99.30% within 480 min, accompanied by a high degradation rate constant of 5.26 × 10-3 min-1. This composite demonstrated reusability potential for up to ten photocatalytic cycles without a significant reduction in the degradation efficiency, surpassing the performance of IOS and FeOx without CQDs. Notably, the composite exhibited strong magnetism with a saturation magnetization strength of 34.7 emu/g, which enables efficient and convenient recovery in photocatalytic applications. This characteristic is highly advantageous for the large-scale industrial utilization of photocatalytic water purification.

The integrated study of the effects of infographic design on waste separation behavior and the behavioral outcome implementation on waste composting

This study revealed the effects of designed infographics for waste separation and the implementation of behavioral outcomes using surveys and lab-scale experiments. The designed infographics improved the waste separation behaviors of the respondents in term of subject norm, perceived behavioral control, and intention. These influential factors were increased by 5.84 to 20.5%. The effects of design elements including waste separation mascots, the knowledge of waste separation, and the knowledge of waste management were dependent on the ratio of graphics and messages. Therefore, the careful attention on design elements of the infographic had to be noted. According to survey results, animal bone and shell wastes were the highest miss-sorting waste for the compostable waste bin. Although the contamination rate of these wastes did not significantly affect the decomposition of organic waste in the composting process, the quality of the product was degraded in term of toxicity. The germination index was decreased by 66.0% under a 10% contaminated condition. In contrast, the increased the total Ca of compost was increased. Furthermore, the other chemical components of final composts were similar under various conditions. It could be concluded that the mixture of animal bone and shell in compostable waste is acceptable for the purpose of waste reduction. However, the contamination rate of inappropriate wastes in the compostable waste bin should be minimized to enable effective waste composting. The significant findings of this study will be able to apply to the design of waste separation at the source and the plan of waste management.

Appraising co-composting efficiency of biodegradable plastic bags and food wastes: Assessment microplastics morphology, greenhouse gas emissions, and changes in microbial community

Biodegradable plastic bags (BPBs) to collect food waste and microplastics (MPs) produced from their biodegradation have received considerable scientific attention recently. Therefore, the current study was carried out to assess the co-composting efficiency of biodegradable plastic bags (polylactic acid (PLA) + polybutylene terephthalate (PBAT) + ST20 and PLA + PBAT+MD25) and food waste. The variations in greenhouse gas (GHG) emissions, microbial community and compost fertility were likewise assessed. Compared with the control, PLA + PBAT+ST20 and PLA + PBAT+MD25 both accelerated organic matter degradation and increased temperature. Moreover, PLA + PBAT+ST20 aggravated CH₄ and CO₂ emissions by 12.10 % and 11.01 %, respectively. PLA + PBAT+MD25 decreased CH₄ and CO₂ emissions by 5.50 % and 9.12 %, respectively. Meanwhile, compared with PLA + PBAT+ST20, the combined effect of plasticizer and inorganic additive in PLA + PBAT+MD25, reduced the NO₃^--N contents, seed germination index (GI) and compost maturity. Furthermore, adding BPBs changed the richness and diversity of the bacterial community (Firmicutes, Proteobacteria and Bacteroidetes). Likewise, redundancy analysis (RDA) showed that the co-compost system of BPBs and food waste accelerated significantly bacterial community succession from Firmicutes and Bacteroidetes at the initial stage to Proteobacteria and Actinobacteria at the mature stage, increased co-compost temperature to over 64 °C and extended thermophilic composting phase, and promoted the degradation of MPs. Additionally, according to structural equation model quantification results, the inorganic additive of PLA + PBAT+MD25 had more serious toxicity to microorganisms and had significantly adverse effects on GI through CO₂-C (λ = -0.415, p < 0.05) and NO₃^--N (λ = -0.558, p < 0.001), thus reduced compost fertility and quality. The results also indicated that the BPBs with ST20 as an additive could be more suitable for industrial composting than the BPBs with MD25 as an additive. This study provided a vital basis for understanding the potential environmental and human health risks of the MPs' generated by the degradation of BPBs in compost.

Bacterial dynamics for gaseous emission and humification during bio-augmented composting of kitchen waste with lime addition for acidity regulation

This study investigated the impacts of lime addition and further microbial inoculum on gaseous emission and humification during kitchen waste composting. High-throughput sequencing was integrated with Linear Discriminant Analysis Effect Size (LEfSe) and Functional Annotation of Prokaryotic Taxa (FAPROTAX) to decipher bacterial dynamics in response to different additives. Results showed that lime addition enriched bacteria, such as Taibaiella and Sphingobacterium as biomarkers, to strengthen organic biodegradation toward humification. Furthermore, lime addition facilitated the proliferation of thermophilic bacteria (e.g. Bacillus and Symbiobacterium) for aerobic chemoheterotrophy, leading to enhanced organic decomposition to trigger notable gaseous emission. Such emission profile was further exacerbated by microbial inoculum to lime-regulated condition given the rapid enrichment of bacteria (e.g. Caldicoprobacter and Pusillimonas as biomarkers) for fermentation and denitrification. In addition, microbial inoculum slightly hindered humus formation by narrowing the relative abundance of bacteria for humification. Results from this study show that microbial inoculum to feedstock should be carefully regulated to accelerate composting and avoid excessive gaseous emission.

Emission of volatile sulphur compounds during swine manure composting: Source identification, odour mitigation and assessment

This study aimed to identify the sources of volatile sulphur compounds (VSCs) and evaluate their mitigation by ferric oxide (Fe₂O₃) during swine manure composting. Four chemicals, including l-cysteine, l-methionine, sodium sulphite, and sodium sulphate, were further added to simulate organic and inorganic sulphur-containing substances in swine manure to track VSC sources during composting. Results show that sulphur simulants induced the emission of six common VSCs, including methyl sulphide (Me₂S), dimethyl sulphide (Me₂SS), carbonyl sulphide (COS), carbon disulphide (CS₂), methyl mercaptan (MeSH), and ethyl mercaptan (EtSH), during swine manure composting. Of them, COS, CS₂, MeSH and Me₂SS were predominantly contributed by the biodegradation of methionine and cysteine, while Me₂S and EtSH were dominated by the reduction of sulphite and sulphate. Further Fe₂O₃ addition at 1.5 % of total wet weight of composting materials immobilized elemental sulphur and inhibited sulphate reduction to reduce the emission of VSCs by 46.7-80.9 %. Furthermore, odour assessment indicated that adding Fe₂O₃ into composting piles significantly reduced the odour intensity level to below 4, the odour value of VSCs by 47.1-81.3 %, and thus the non-carcinogenic risk by 68.4 %.

Performance assessment of in-vessel composter through heavy metal immobilization and humification of Parthenium hysterophorus

The bioconversion of Parthenium hysterophorus was performed through rotary drum composter and examined the mechanism of humification and heavy metals immobilization in the process. The 20th day compost contains a significant increase in humic substances of 28.7% compared to the initial day mix. The bioavailable fractions of heavy metals have reduced by 30 to 55% in the 20th day compost compared to the initial day mix. The leaching potential of cadmium has been reduced by 69% in the 20th day compost. The immobile fractions (F5) of Cd, Ni and Pb have been increased to 100, 99 and 78% in the 20th day compost. The mitotic index was increased by 1.7 and 51.6% in 25% dosed compost extract compared to the control and P. hysterophorus extract respectively. The transition of heavy metals to immobile fraction indicated the biodegradation capability of P. hysterophorus through rotary drum composting.