Post COVID-19 pandemic: Disposable face masks as a potential vector of antibiotics in freshwater and seawater

Microplastics emerge as a hotspot for dibutyl phthalate sources in rivers and oceans: Leaching behavior and potential risks

Dibutyl phthalate (DBP) as a plasticizer has been widely used in the processing of plastic products. Nevertheless, these DBP additives have the potential to be released into the environment throughout the entire life cycle of plastic products. Herein, the leaching behavior of DBP from PVC microplastics (MPs) in freshwater and seawater and its potential risks were investigated. The results show that the plasticizer content, UV irradiation, and hydrochemical conditions have a great influence on the leaching of DBP from the MPs. The release of DBP into the environment increases proportionally with higher concentrations of additive DBP in MPs, particularly when it exceeds 15 %. The surface of MPs undergoes accelerated oxidation and increased hydrophilicity under UV radiation, thereby facilitating the leaching of DBP. Through 30 continuous leaching experiments, the leaching of DBP from MPs in freshwater and seawater can reach up to 12.28 and 5.42 mg g-1, respectively, indicating that MPs are a continuous source of DBP pollution in the aquatic environment. Moreover, phthalate pollution index (PPI) indicates that MPs can significantly increase DBP pollution in marine environment through land and sea transport processes. Therefore, we advocate that the management of MPs waste containing DBP be prioritized in coastal sustainable development.

Aging behavior and leaching characteristics of microfibers in landfill leachate: Important role of surface mesh structure

Mesh-structured films formed by the post-processing of microfibers improves their permeability and dexterity, such as disposable masks. However, the aging behavior and potential risks of mesh-structured microfibers (MS-MFs) in landfill leachate remain poorly understood. Herein, the aging behavior and mechanisms of MS-MFs and ordinary polypropylene-films (PP-films) microplastics, as well as their leaching concerning dissolved organic matter (DOM) in landfill leachate were investigated. Results revealed that MS-MFs underwent more significant physicochemical changes than PP-films during the aging process in landfill leachate, due to their rich porous habitats. An important factor in the photoaging of MS-MFs was related to reactive oxygen species produced by DOM, and this process was promoted by photoelectrons under UV irradiation. Compared with PP-films, MS-MFs released more DOM and nano-plastics fragments into landfill leachate, altering the composition and molecular weight of DOM. Aged MS-MFs-DOM generated new components, and humus-like substances produced by photochemistry showed the largest increase. Correlation analysis revealed that leached DOM was positively correlated with oxygen-containing groups accumulated in aged MS-MFs. Overall, MS-MFs will bring higher environmental risks and become a new long-term source of DOM contaminants in landfill leachate. This study provides new insights into the impact of novel microfibers on landfill leachate carbon dynamics.

Adsorption-desorption behavior of florpyrauxifen-benzyl on three microplastics in aqueous environment as well as its mechanism and various influencing factors

Microplastics (MPs) and pesticides are two categories contaminants with proposed negative impacts to aqueous ecosystems, and adsorption of pesticides on MPs may result in their long-range transport and compound combination effects. Florpyrauxifen-benzyl, a novel pyridine-2-carboxylate auxin herbicide has been widely used to control weeds in paddy field, but the insights of which are extremely limited. Therefore, adsorption and desorption behaviors of florpyrauxifen-benzyl on polyvinyl chloride (PVC), polyethylene (PE) and disposable face masks (DFMs) in five water environment were investigated. The impacts of various environmental factors on adsorption capacity were evaluated, as well as adsorption mechanisms. The results revealed significant variations in adsorption capacity of florpyrauxifen-benzyl on three MPs, with approximately order of DFMs > PE > PVC. The discrepancy can be attributed to differences in structural and physicochemical properties, as evidenced by various characterization analysis. The kinetics and isotherm of florpyrauxifen-benzyl on three MPs were suitable for different models, wherein physical force predominantly governed adsorption process. Thermodynamic analysis revealed that both high and low temperatures weakened PE and DFMs adsorption, whereas temperature exhibited negligible impact on PVC adsorption. The adsorption capacity was significantly influenced by most environmental factors, particularly pH, cations and coexisting herbicide. This study provides valuable insights into the fate of florpyrauxifen-benzyl in presence of MPs, suggesting that PVC, PE and DFMs can serve as carriers of florpyrauxifen-benzyl in aquatic environment.

The Fate of Microplastics, Derived from Disposable Masks, in Natural Aquatic Environments

This paper mainly reviews the fate of microplastics, released from used face masks, in the water environment. Through previous experiments, the amount of fiber microplastics released from used face masks into aqueous environments was not negligible, with the maximum microplastics releasing amount reaching 10,000 piece·day-1 for each mask. Microplastic derived from these masks often occurred in the shape of polymeric fibers that resulted from the breakage of the chemical bonds in the plastic fibers by the force of water flow. The potential contact forces between microplastics (originating from face masks) with other pollutants, primarily encompass hydrophobic and electrostatic interactions. This critical review paper briefly illustrates the fate of microplastics derived from disposable face masks, further devising effective strategies to mitigate the environmental impact of plastic particle release from the used personal protective equipment.

Toxic effects of aging mask microplastics on E. coli and dynamic changes in extracellular polymeric matter

Contamination of disposable medical masks has become a growing problem globally in the wake of Covid-19 due to their widespread use and improper disposal. Three different mask layers, namely the outer layer, the meltblown (MB) filler layer and the inner layers release three different types of microplastics, whose physical and chemical properties change after prolonged environmental weathering. In this study, physical and chemical changes of mask microplastics before and after aging were characterized by different characterization techniques. The toxic effect and mechanism of aged mask microplastics on Escherichia coli (E. coli) were studied by measuring the growth inhibition of mask microplastics, the change in ATPase activity, the change in malondialdehyde content and reactive oxygen species production, and the release of the chemical composition of exopolymeric substances (EPS). The microplastics of the aged MB filter layer had the most significant inhibitory effect on E. coli growth, reaching 19.2 % after 36 h. Also, under the influence of mask microplastics, ATPase activity of E. coli was inhibited and a large amount of EPS was released. The chemical composition of EPS has also changed. This study proposed the possible toxicity mechanism of mask microplastics and the self-protection mechanism of E. coli, and provided a reference for future research on the toxic effects of mask microplastics on environmental organisms.

Phyto-assisted synthesis of CuO/industrial waste derived biochar composite for adsorptive removal of doxycycline hydrochloride and recycling of spent biochar as green energy storage device

The highest exposure of Endocrine disrupting compounds (EDC) into the water bodies as a result of extensive production and application of Covid-19 related drugs is a growing concern now a days. Herein, a novel nanocomposite material was developed by impregnating green synthesized copper oxide nanoparticles on the porous surface of fabric waste derived biochar to eliminate the concerned EDCs along with a sustainable disposal strategy for the spent adsorbent. Morphological characterizations by Field emission scanning electron microscopy confirmed the formation of hierarchical porous structured material. X-ray analysis revealed presence of both amorphous nature of biochar matrix as well as the crystalline nature attributed from monodispersion of copper oxide nanoparticles onto biochar surface. Batch sorption study showed removal of doxycycline hydrochloride (DOX) of >97% after 2 h at pH 7, 30 mg L-1 initial concentration of DOX and 2 g L-1 of adsorbent dose at room temperature after a two-step optimization process. Spectroscopic study and Raman shift suggested that pore filling, strong complexation and electrostatic interactions maximise the adsorption of DOX in the CuO/biochar composite as compared to the pristine biochar. However disposal of spent adsorbent is a crucial aspect for the environment and therefore, a sustainable recycling strategy for DOX loaded adsorbent as electrode material has been proposed for the first time in this study. Maximum specific capacitance value was observed in the range of 221.9-297.3 F g-1 for the DOX loaded nanocomposite at 1 mV s-1 comparable with other reported heteroatom-doped carbonaceous material as electrode. Therefore the excellent adsorption capacity of green synthesized CuO/biochar composite and its recycling after DOX adsorption can be recommended as a sustainable solution for mitigation of pharmaceuticals from wastewater. A detail study on degradation of DOX into eco-friendly products and its cost-effectiveness would be beneficial to suggest appropriate mitigation strategy for such compounds.

Sequestration of strontium, nickel, and cadmium on glomalin-related soil protein: Interfacial behaviors and ecological functions

Glomalin-related soil protein (GRSP) is a widespread recalcitrant soil protein complex that promotes the immobilization of metals in soils. Herein, we combined indoor simulation and field investigation to reveal the interfacial behaviors and ecological functions of GRSP to the three typical metals (Sr(II), Ni(II), and Cd(II)). The kinetic and isotherm data suggested that GRSP had a strong ability to adsorb the metals, which was closely related to the Hard-Soft-Acid-Base theory and the film diffusion mechanisms. Regarding environmental factors, the higher solution pH was beneficial to the adsorption of the metals onto GRSP, while the adsorption capacity decreased at lower or higher salinity due to the salting-out and Na⁺ competition effects. Moreover, Sr(II), Ni(II), and Cd(II) showed competitive adsorption onto GRSP, which was associated with the spatial site resistance effect. By comparing the retention factors of seven natural and artificial particles, GRSP had elevated distribution coefficients in high metal concentration, while its retention factors showed a relatively lower decrease, suggesting that GRSP had excellent buffer performance for a potential metal pollution emergency. Through the continental-scale coastal regions investigation, GRSP sequestered 1.05-3.11 μmol/g Ni, 0.31-1.49 μmol/g Sr, and 0.01-0.06 μmol/g Cd with 0.54-0.91 % of the sediment mass, demonstrating its strong ability to adsorb the metals. Therefore, we advocate that GRSP, as a recalcitrant protein complex, can be considered an effective tool for buffering capacity of metal pollution and environmental capacity within coastal wetlands.

Degradation of a New Herbicide Florpyrauxifen-Benzyl in Water: Kinetics, Various Influencing Factors and Its Reaction Mechanisms

Florpyrauxifen-benzyl is a novel herbicide used to control weeds in paddy fields. To clarify and evaluate its hydrolytic behavior and safety in water environments, its hydrolytic characteristics were investigated under varying temperatures, pH values, initial mass concentrations and water types, as well as the effects of 40 environmental factors such as microplastics (MPs) and disposable face masks (DFMs). Meanwhile, hydrolytic products were identified by UPLC-QTOF-MS/MS, and its hydrolytic pathways were proposed. The effects of MPs and DFMs on hydrolytic products and pathways were also investigated. The results showed that hydrolysis of florpyrauxifen-benzyl was a spontaneous process driven by endothermic, base catalysis and activation entropy increase and conformed to the first-order kinetics. The temperature had an obvious effect on hydrolysis rate under alkaline condition, the hydrolysis reaction conformed to Arrhenius formula, and activation enthalpy, activation entropy, and Gibbs free energy were negatively correlated with temperature. Most of environmental factors promoted hydrolysis of florpyrauxifen-benzyl, especially the cetyltrimethyl ammonium bromide (CTAB). The hydrolysis mechanism was ester hydrolysis reaction with a main product of florpyrauxifen. The MPs and DFMs did not affect the hydrolytic mechanisms but the hydrolysis rate. The results are crucial for illustrating and assessing the environmental fate and risks of florpyrauxifen-benzyl.

Personal protective equipment and micro-nano plastics: A review of an unavoidable interrelation for a global well-being hazard

The usage and the demand for personal protective equipments (PPEs) for our day-to-day survival in this pandemic period of COVID-19 have seen a steep rise which has consequently led to improper disposal and littering. Fragmentation of these PPE units has eventually given way to micro-nano plastics (MNPs) emission in the various environmental matrices and exposure of living organisms to these MNPs has proven to be severely toxic. Numerous factors contribute to the toxicity imparted by these MNPs that mainly include their shape, size, functional groups and their chemical diversity. Even though multiple studies on the impacts of MNPs toxicity are available for other organisms, human cell line studies for various plastic polymers, other than the most common ones namely polyethylene (PE), polystyrene (PS) and polypropylene (PP), are still at their nascent stage and need to be explored more. In this article, we cover a concise review of the literature on the impact of these MNPs in biotic and human systems focusing on the constituents of the PPE units and the additives that are essentially used for their manufacturing. This review will subsequently identify the need to gather scientific evidence at the smaller level to help combat this microplastic pollution and induce a more in-depth understanding of its adverse effect on our existence.

Distribution and potential ecological risks of microplastics in Zhushan Bay, China

The interaction between microplastics (MPs) and microorganisms may alter the distribution of antibiotic resistance genes (ARGs) in water and increase the ecological risk of drinking water sources. To investigate the characteristics of MPs geographical distribution and its potential ecological risk in typical urban water, this study was conducted in Zhushan Bay, and we carried out a combination of tests to analyze the distribution of MPs and the migration changes of their surface microbial community composition and ARGs in different media by 16S rRNA gene high-throughput sequencing, non-targeted metabolomics and qPCR genomics in the near-shore (I), middle area (Ⅱ) and near-lake (Ⅲ) of Zhushan Bay. The results showed that MPs in fibrous form were dominant in the aquatic environment of Zhushan Bay; Polyurethane (PU) and Silicone were the main MPs types in Zhushan Bay. The abundance of MPs in the water of Zhushan Bay was winter > summer > autumn > spring; and in the sediment was winter > summer > autumn > spring, respectively. The distribution results of MPs in geographical location are as follows: In the water I > Ⅱ > Ⅲ, sediment exhibited Ⅱ > Ⅲ > I. The results indicate that physicochemical factors will affect the geographical distribution of MPs and their surface microbial community composition in the aquatic environment of Zhushan Bay. More cooperative behaviors and increased metabolically important pathways occurred in the microbial network on water-MPs compared to sediment-MPs. However, the microbial community in the sediment-MPs was more stable and had higher abundance of mobile genetic elements (MGEs). A total of 362 differential metabolites were detected, of which 193 were up-regulated and 19 down-regulated differential metabolites. blaTEM, Sul, and inti1 were prevalent in both the water and sediments of Zhushan Bay. Sul1 was most contaminated in ARGs. This study provides the latest field data and insights into MPs pollution in key aquatic environments.

Enrichment of antibiotic resistant genes and pathogens in face masks from coastal environments

Face masks (FMs) are essential to limit the spread of the coronavirus during pandemic, a considerable of which are accumulated on the coast. However, limited is known about the microbial profile in the biofilm of the face masks (so-called plastisphere) and the impacts of face masks on the surrounding environments. We herein performed face mask exposures to coastal sediments and characterized the microbial community and the antibiotic resistome. We detected 64 antibiotic-resistance genes (ARGs) and 12 mobile gene elements (MGEs) in the plastisphere. Significant enrichments were found in the relative abundance of total ARGs in the plastisphere compared to the sediments. In detail, the relative abundance of tetracycline, multidrug, macrolide-lincosamide-streptogramin B (MLSB), and phenicol-resistant genes had increased by 5-10 times. Moreover, the relative abundance of specific hydrocarbonoclastic bacteria (e.g., Polycyclovorans sp.), pathogens (e.g., Pseudomonas oleovorans), and total MGEs significantly increased in the sediments after face mask exposure, which was congruent with the alteration of pH value and metal concentrations in the microcosms. Our study demonstrated the negative impacts of FMs on coastal environments regardless of the profiles of ARGs or pathogens. These findings improved the understanding of the ecological risks of face masks and underlined the importance of beach cleaning.

Photo-aged non-biodegradable and biodegradable mulching film microplastics alter the interfacial behaviors between agricultural soil and inorganic arsenic

The impacts of microplastics (MPs) prevalent in soil on the transport of pollutants were urged to be addressed, which has important implications for ecological risk assessment. Therefore, we investigated the influence of virgin/photo-aged biodegradable polylactic acid (PLA) and non-biodegradable black polyethylene (BPE) mulching films MPs on arsenic (As) transport behaviors in agricultural soil. Results showed that both virgin PLA (VPLA) and aged PLA (APLA) enhanced the adsorption of As(Ⅲ) (9.5%, 13.3%) and As(Ⅴ) (22.0%, 6.8%) due to the formation of abundant H-bonds. Conversely, virgin BPE (VBPE) reduced the adsorption of As(Ⅲ) (11.0%) and As(Ⅴ) (7.4%) in soil owing to the "dilution effect", while aged BPE (ABPE) improved arsenic adsorption amount to the level of pure soil due to newly generated O-containing functional groups being feasible to form H-bonds with arsenic. Site energy distribution analysis indicated that the dominant adsorption mechanism of arsenic, chemisorption, was not impacted by MPs. The occurrence of biodegradable VPLA/APLA MPs rather than non-biodegradable VBPE/ABPE MPs resulted in an increased risk of soil accumulating As(Ⅲ) (moderate) and As(Ⅴ) (considerable). This work uncovers the role of biodegradable/non-biodegradable mulching film MPs in arsenic migration and potential risks in the soil ecosystem, depending on the types and aging of MPs.

Toxicity interaction of polystyrene nanoplastics with sulfamethoxazole on the microalgae Chlamydomonas reinhardtii: A closer look at effect of light availability

The coexistence of nanoplastics and antibiotics in the aquatic environment has raised a complicated risk for ecosystems and human health. How the environmental factors e.g., light, regulate the interaction between nanoplastics and antibiotics and the resulting combined toxicity is poorly understood. Here, we investigated the individual and combined toxicity of polystyrene nanoplastics (nPS, 100 mg L¹) and sulfamethoxazole (SMX, 2.5 and 10 mg L^-1) toward the microalgae Chlamydomonas reinhardtii under low (LL, 16 μmol m^-2·s^-1), normal (NL, 40 μmol m^-2·s^-1), and high light (HL, 150 μmol m^-2·s^-1) in terms of cellular responses. Results indicated that the joint toxicity of nPS and SMX commonly exhibited a strong antagonistic/mitigative effect under LL/NL at 24 h, and under NL at 72 h. nPS could adsorb more SMX under LL/NL at 24 h (1.90/1.33 mg g^-1) and under NL at 72 h (1.01 mg g^-1), thereby alleviating SMX toxicity to C. reinhardtii. However, the self-toxicity of nPS had a negative influence on the degree of antagonism between nPS and SMX. The experimental results coupled with computational chemistry further revealed that the adsorption capacity of SMX on nPS was stimulated by low pH under LL/NL at 24 h (∼7.5), while by less co-existing saline ions (0.83 ppt) and algae-derived dissolved organic matter (9.04 mg L^-1) under NL at 72 h. nPS toxicity that was responsible for the toxic action modes was mainly attributed to the shading effect induced by hetero-aggregation and hindrance of light transmittance (>60%), as well as being regulated by additives leaching (0.49-1.07 mg L^-1) and oxidative stress. Overall, these findings provided a critical basis for the risk assessment and management of multiple pollutants in the complex natural environment.

Current knowledge on the presence, biodegradation, and toxicity of discarded face masks in the environment

During the first year of the COVID-19 pandemic, facemasks became mandatory, with a great preference for disposable ones. However, the benefits of face masks for health safety are counteracted by the environmental burden related to their improper disposal. An unprecedented influx of disposable face masks entering the environment has been reported in the last two years of the pandemic, along with their implications in natural environments in terms of their biodegradability, released contaminants and ecotoxicological effects. This critical review addresses several aspects of the current literature regarding the (bio)degradation and (eco)toxicity of face masks related contaminants, identifying uncertainties and research needs that should be addressed in future studies. While it is indisputable that face mask contamination contributes to the already alarming plastic pollution, we are still far from determining its real environmental and ecotoxicological contribution to the issue. The paucity of studies on biodegradation and ecotoxicity of face masks and related contaminants, and the uncertainties and uncontrolled variables involved during experimental procedures, are compromising eventual comparison with conventional plastic debris. Studies on the abundance and composition of face mask-released contaminants (microplastics/fibres/ chemical compounds) under pre- and post-pandemic conditions should, therefore, be encouraged, along with (bio)degradation and ecotoxicity tests considering environmentally relevant settings. To achieve this, methodological strategies should be developed to overcome technical difficulties to quantify and characterise the smallest MPs and fibres, adsorbents, and leachates to increase the environmental relevancy of the experimental conditions.

Assessment of relationship between aging and contaminant-carryover for different filter layer of surgical mask under urban environmental stressors

Abundant disposable surgical masks (SMs) remain in the environment and continue to age under urban environmental stressors. This study aimed to investigate the aging characteristics of SMs and the effect of different aged layers of SMs on phenanthrene (PHE), tylosin (TYL), and sulfamethazine (SMT) under two different urban environmental stressors (UV and ozone). The results show that UV exposure causes more severe aging of the SM layers than ozone. The middle layer, made of melt-brown fabric, has displayed the highest degree of aging due to its smaller diameter and mechanical strength. The two-dimensional correlation spectroscopy (2D-COS) analysis reveals the different aging sequences of functional groups and three layers in aged SMs under the two urban environmental stressors. Whether the SMs are aged or not, the adsorptions of three organic pollutants on SMs are positively correlated with the octanol-water partition coefficient. Furthermore, except for the dominant hydrophobic interaction, aged SMs can promote the adsorption of three organic pollutants by accessory interactions (hydrogen bonding and partition), depending on their structures. These findings highlight the environmental effects of new microplastic (MP) sources and coexisting pollutants under the influence of COVID-19, which is helpful in accurately evaluating the biological toxicity of SMs.

Plastic wastes in the time of COVID-19: Their environmental hazards and implications for sustainable energy resilience and circular bio-economies

The global scope of pollution from plastic waste is a well-known phenomenon associated with trade, mass consumption, and disposal of plastic products (e.g., personal protective equipment (PPE), viral test kits, and vacuum-packaged food). Recently, the scale of the problem has been exacerbated by increases in indoor livelihood activities during lockdowns imposed in response to the coronavirus disease 2019 (COVID-19) pandemic. The present study describes the effects of increased plastic waste on environmental footprint and human health. Further, the technological/regulatory options and life cycle assessment (LCA) approach for sustainable plastic waste management are critically dealt in terms of their implications on energy resilience and circular economy. The abrupt increase in health-care waste during pandemic has been worsening environmental quality to undermine the sustainability in general. In addition, weathered plastic particles from PPE along with microplastics (MPs) and nanoplastics (NPs) can all adsorb chemical and microbial contaminants to pose a risk to ecosystems, biota, occupational safety, and human health. PPE-derived plastic pollution during the pandemic also jeopardizes sustainable development goals, energy resilience, and climate control measures. However, it is revealed that the pandemic can be regarded as an opportunity for explicit LCA to better address the problems associated with environmental footprints of plastic waste and to focus on sustainable management technologies such as circular bio-economies, biorefineries, and thermal gasification. Future researches in the energy-efficient clean technologies and circular bio-economies (or biorefineries) in concert with a "nexus" framework are expected to help reduce plastic waste into desirable directions.

The interfacial behaviors of different arsenic species on polyethylene mulching film microplastics: Roles of the plastic additives

Plastic additives widely existed in plastic mulching films, but their roles in microplastics (MPs) derived from these plastics as vectors of pollutants were not clear. This work clarified the role of plastic additives on the sorption-desorption behaviors of four arsenic species (arsenite (As(Ⅲ)), arsenate (As(Ⅴ)), roxarsone (ROX), and p-arsanilic acid (p-ASA)) on/from virgin polyethylene (V-PE), white PE mulching film (W-PE, with Si-containing additives), and black PE mulching film (B-PE, with CaCO₃ and TiO₂ additives) MPs. The maximum sorption amounts of arsenic species on V-PE (3.33-20.10 mg/kg) and W-PE MPs (4.78-21.93 mg/kg) had no significant difference, while those on B-PE (43.02-252.19 mg/kg) facilitated by its additives were up to one order of magnitude greater than V-PE or W-PE (p < 0.05). Desorption hysteresis index (HI) indicated the irreversible arsenic sorption on three PE MPs, especially for B-PE containing additives that can co-precipitate and complex with arsenicals. The effects of pH, humic substances, and coexisting anions on arsenic sorption by B-PE were more obvious than that by V-PE or W-PE MPs, attributing to electrostatic interaction enhanced by CaCO₃ and TiO₂ additives. This work provides theoretical basis for migration of arsenic species on MPs containing plastic additives and their potential environmental risk assessment.

Interactions of microplastics and soil pollutants in soil-plant systems

In recent years, increasing studies have been reported on characterization and detection of microplastics (MPs), and their interactions with organic pollutants (OPs) and heavy metals (HMs) in soils. However, a comprehensive review on the characteristics and factors that influence MPs distribution in soils, the sorption characteristics and mechanisms of soil contaminants by MPs, especially the interactions of MPs and their complexes with pollutants in the soil-plant systems remains rarely available at present. This review focuses on the sorption features and mechanisms of pollutants by MPs in soil and discussed the effects of MPs and their complexing with pollutants on soil properties, microbe and plants. The polarity of MPs significantly influenced the sorption of OPs, and different sorption mechanisms are involved for the hydrophobic and hydrophilic OPs. The sorption of OPs on MPs in soils is different from that in water. Aging of MPs can promote the sorption and migration of contaminants. The enhanced effects of biofilm in microplastisphere on the sorption of pollutants by MPs are critical, and interactions of soil environment-MPs-microbe-HMs-antibiotics increase the potential pathogens and larger release of resistance genes. The coexistence of HMs and MPs affected the growth of plants and the uptake of HMs and MPs by the plants. Moreover, the type, dose, shape and particle size of MPs have important influences on their interactions with pollutants and subsequent effects on soil properties, microbial activities and plant growth. This review also pointed out some knowledge gaps and constructive countermeasures to promote future research in this field.

Rhodococcus strains as a good biotool for neutralizing pharmaceutical pollutants and obtaining therapeutically valuable products: Through the past into the future

Active pharmaceutical ingredients present a substantial risk when they reach the environment and drinking water sources. As a new type of dangerous pollutants with high chemical resistance and pronounced biological effects, they accumulate everywhere, often in significant concentrations (μg/L) in ecological environments, food chains, organs of farm animals and humans, and cause an intense response from the aquatic and soil microbiota. Rhodococcus spp. (Actinomycetia class), which occupy a dominant position in polluted ecosystems, stand out among other microorganisms with the greatest variety of degradable pollutants and participate in natural attenuation, are considered as active agents with high transforming and degrading impacts on pharmaceutical compounds. Many representatives of rhodococci are promising as unique sources of specific transforming enzymes, quorum quenching tools, natural products and novel antimicrobials, biosurfactants and nanostructures. The review presents the latest knowledge and current trends regarding the use of Rhodococcus spp. in the processes of pharmaceutical pollutants’ biodegradation, as well as in the fields of biocatalysis and biotechnology for the production of targeted pharmaceutical products. The current literature sources presented in the review can be helpful in future research programs aimed at promoting Rhodococcus spp. as potential biodegraders and biotransformers to control pharmaceutical pollution in the environment.

Uncovering the disposable face masks as vectors of metal ions (Pb(Ⅱ), Cd(Ⅱ), Sr(Ⅱ)) during the COVID-19 pandemic

The demand for disposable face masks (DFMs) increased sharply in response to the COVID-19 pandemic. However, information regarding the underlying roles of the largely discarded DFMs in the environment is extremely lacking. This study focused on the pristine and UV-aged DFMs as vectors of metal ions (Pb(Ⅱ), Cd(Ⅱ), and Sr(Ⅱ)). Further, the aging mechanism of DFMs with UV radiation as well as the interaction mechanisms between DFMs and metal ions were investigated. Results revealed that the aging process would help to promote more metal ions adsorbed onto DFMs, which was mainly attributed to the presence of oxygen-containing groups on the aged DFMs. The adsorption affinity of pristine and aged DFMs for the metal ions followed Pb(Ⅱ) > Cd(Ⅱ) > Sr(Ⅱ), which was positively corrected with the electronegativity of the metals. Interestingly, we found that even if DFMs were not disrupted, DFMs had similar or even higher adsorption affinity for metals compared with other existing microplastics. Besides, regarding environmental factors, including salinity and solution pH played a crucial role in the adsorption processes, with greater adsorption capacities for pristine and aged DFMs at higher pH values and low salinity. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and density functional theory further confirmed that the pristine DFMs interacted with the metals mainly through electrostatic interaction, while electrostatic interaction and surface complexation jointly regulated the adsorption of the metals onto aged DFMs. Overall, these findings would help to evaluate environmental behaviors and risks of DFMs associated with metals.