The occurrence, distribution, and risks of PFAS at AFFF-impacted sites in Finland

Occurrence of a "forever chemical" in the atmosphere above pristine Amazon Forest

Per- and polyfluoroalkyl substances (PFAS), often referred to as "forever chemicals", are a class of man-made, extremely stable chemicals, which are widely used in industrial and commercial applications. Exposure to some PFAS is now known to be detrimental to human health. By virtue of PFAS long residence times, they are widely detected in the environment, including remote locations such as the Arctics, where the origin of the PFAS is poorly understood. It has been suggested that PFAS may be transported through contaminated waters, leading to accumulation in coastal areas, where they can be aerosolised via sea spray, thereby extending their geographical distribution far beyond their original source regions. The aim of this work is to investigate, for the first time, whether "forever chemicals" could be transported to areas considered to be pristine, far from coastal sites. This study was performed at the Amazonian Tall Tower Observatory (ATTO), a unique remote site situated in the middle of the Amazon rainforest, where a restricted PFAS, perfluorooctanoic acid (PFOA), was observed with concentrations reaching up to 2 pg/m3. A clear trend of increasing concentration with sampling height was observed and air masses from the south over Manaus had the highest concentrations. Atmospheric lifetime estimations, removal mechanisms supported by measurements at two heights (320 and 42 m above the rainforest), and concentration spikes indicated a long-range transport of PFOA to pristine Amazon rainforest. Potential sources, including industrial activities in urban areas, were explored, and historical fire management practices considered. This research presents the first measurements of PFAS in the atmosphere of Amazon rainforest. Remarkably, even in this remote natural environment, appreciable levels of PFAS can be detected. This study provides valuable insights into the long-range transport of the anthropogenic "forever chemical" into a remote natural ecosystem and should raise awareness of potential environmental implications.

Soil amendments reduce PFAS bioaccumulation in Eisenia fetida following exposure to AFFF-impacted soil

The efficacy of RemBind® 300 to immobilize per- and polyfluoroalkyl substances (PFAS) in aqueous film forming foam (AFFF)-impacted soil (∑28 PFAS 1280-8130 ng g-1; n = 8) was assessed using leachability (ASLP) and bioaccumulation (Eisenia fetida) endpoints as the measure of efficacy. In unamended soil, ∑28 PFAS leachability ranged from 26.0 to 235 μg l-1, however, following the addition of 5% w/w RemBind® 300, ∑28 PFAS leachability was reduced by > 99%. Following exposure of E. fetida to unamended soil, ∑28 PFAS bioaccumulation ranged from 18,660-241,910 ng g-1 DW with PFOS accumulating to the greatest extent (15,150-212,120 ng g-1 DW). Biota soil accumulation factors (BSAF) were significantly (p < 0.05) higher for perfluoroalkyl sulfonic acids (PFSA; 13.2-50.9) compared to perfluoroalkyl carboxylic acids (PFCA; 1.2-12.7) while for individual PFSA, mean BSAF increased for C4 to C6 compounds (PFBS: 42.6; PFPeS: 52.7; PFHxS: 62.4). In contrast, when E. fetida were exposed to soil amended with 5% w/w RemBind® 300, significantly lower PFAS bioaccumulation occurred (∑28 PFAS: 339-3397 ng g-1 DW) with PFOS accumulation 23-246 fold lower compared to unamended soil. These results highlight the potential of soil amendments for reducing PFAS mobility and bioavailability, offering an immobilization-based risk management approach for AFFF-impacted soil.

Ultrasonic degradation of per-and polyfluoroalkyl substances (PFAS), aqueous film-forming foam (AFFF) and foam fractionate (FF)

The ubiquitousness of per- and polyfluoroalkyl substances (PFAS) is a big concern and PFAS remediation is urgently needed such as via degradation. While previous studies have explored ultrasonic degradation of PFAS, work evaluating the operational parameters is rare, especially concerning real wastes such as aqueous film-forming foam (AFFF) and foam fractionate (FF). This study investigates the key operational parameters affecting the degradation efficiency of PFAS, encompassing ultrasonication frequency (580-1144 kHz), power intensity (125-187.5 W), initial concentration (0.08-40 ppm), treatment duration (0.5-3 h), sample volume (100-500 mL), and PFAS structure (perfluorooctanoic acid or PFOA; perfluorooctane sulfonate or PFOS; 6:2 fluorotelomer sulfonate or 6:2 FTS). The defluorination kinetics is different from the removal/degradation kinetics due to the generation of degradation intermediates, suggesting the complex degradation mechanism, which should be evaluated to close the mass balance effectively. Notably, the optimised ultrasonic system achieves ∼125%/∼115% defluorination in AFFF/FF example wastes (compared to ∼65%/∼97% removal) despite their complex composition and the involvement of total oxidizable precursor (TOP) assay. In the meantime, a few new PFAS are detected in the post-treatments, including perfluorohexane sulfonic acid (PFHxS) and 10:2 fluorotelomer sulfonate (10:2 FTS) in the AFFF, and perfluorooctane sulfonamide (FOSA) and 8:2 fluorotelomer sulfonate (8:2 FTS) in the FF, again suggesting the complex degradation mechanism. Overall, ultrasonication is effective to degrade PFAS real example wastes, advancing its potential for scale-up applications.

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Assessing the suitability of leachability-based screening levels for per- and polyfluoroalkyl substances (PFAS) risk assessment

In recent years, soil screening levels have been adopted by regulatory agencies for certain per- and polyfluoroalkyl substances (PFAS) to assess the risk of groundwater contamination through leaching. These soil screening levels, determined using an established equilibrium-based partitioning equation, have high variability among regulatory groups largely attributed to the diverse reported partitioning coefficients in the literature. This variability between reported partitioning coefficients, and subsequently soil screening levels, is due to the complex leaching behavior of PFAS not being predicted well by the standard equilibrium-based model. This has led one regulatory group to require batch leaching to assess risk rather than setting default soil screening levels based on partitioning equations. In this work, we conducted leaching experiments on five field-sampled soils impacted by aqueous film-forming foams (AFFF), following Leaching Environmental Assessment Framework (LEAF) Method 1316 and compared the results to expected leaching utilizing an equilibrium-based partitioning equation commonly employed by regulatory agencies to establish soil screening levels. Our analysis found among the six PFAS detected in the soils, which have regulatory leaching thresholds established, the partitioning values assumed by the U.S. EPA exhibited the highest accuracy in predicting leachate concentrations. These partitioning values predicted actual leaching within a ± 20 % margin of error for approximately 50 % of sample points, highlighting limitations in relying solely on equilibrium-based partitioning values as predictors of leaching behavior. This discrepancy between predicted and actual leaching has implications for site managers and regulatory entities overseeing PFAS-contaminated sites, suggesting that soil screening level determinations for PFAS might need to be revised to account for the unique transport characteristics of PFAS.

A review of sample collection and analytical methods for detecting per- and polyfluoroalkyl substances in indoor and outdoor air

Per- and polyfluoroalkyl substances (PFAS) are a unique class of chemicals synthesized to aid in industrial processes, fire-fighting products, and to benefit consumer products such as clothing, cosmetics, textiles, carpets, and coatings. The widespread use of PFAS and their strong carbon-fluorine bonds has led to their ubiquitous presence throughout the world. Airborne transport of PFAS throughout the atmosphere has also contributed to environmental pollution. Due to the potential environmental and human exposure concerns of some PFAS, research has extensively focused on water, soil, and organismal detection, but the presence of PFAS in the air has become an area of growing concern. Methods to measure polar PFAS in various matrices have been established, while the investigation of polar and nonpolar PFAS in air is still in its early development. This literature review aims to present the last two decades of research characterizing PFAS in outdoor and indoor air, focusing on active and passive air sampling and analytical methods. The PFAS classes targeted and detected in air samples include fluorotelomer alcohols (FTOHs), perfluoroalkane sulfonamides (FASAs), perfluoroalkane sulfonamido ethanols (FASEs), perfluorinated carboxylic acids (PFCAs), and perfluorinated sulfonic acids (PFSAs). Although the manufacturing of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) has been largely phased out, these two PFAS are still often detected in air samples. Additionally, recent estimates indicate that there are thousands of PFAS that are likely present in the air that are not currently monitored in air methods. Advances in air sampling methods are needed to fully characterize the atmospheric transport of PFAS.

A review of the occurrence and microbial transformation of per- and polyfluoroalkyl substances (PFAS) in aqueous film-forming foam (AFFF)-impacted environments

Aqueous film-forming foams (AFFFs) have been extensively used for extinguishing hydrocarbon-fuel fires at military sites, airports, and fire-training areas. Despite being a significant source of per- and polyfluoroalkyl substances (PFAS), our understanding of PFAS occurrence in AFFF formulations and AFFF-impacted environments is limited, as is the impact of microbial transformation on the environment fate of AFFF-derived PFAS. This literature review compiles PFAS concentrations in electrochemical fluorination (ECF)- and fluorotelomer (FT)-based AFFFs and provides an overview of PFAS occurrence in AFFF-impacted environments. Our analysis reveals that AFFF use is a predominant point source of PFAS contamination, including primary precursors (polyfluoroalkyl substances as AFFF components), secondary precursors (polyfluoroalkyl transformation products of primary precursors), and perfluoroalkyl acids (PFAAs). Moreover, there are discrepancies between PFAS concentration profiles in AFFFs and those measured in AFFF-impacted media. For example, primary precursors constitute 52.6 % and 99.5 % of PFAS mass in ECF- and FT-based AFFFs, respectively, whereas they represent only 0.7 % total mass in AFFF-impacted groundwater. Conversely, secondary precursors, which constitute <1 % of PFAS in AFFFs, represent 4.0-27.8 % of PFAS in AFFF-impacted environments. The observed differences in PFAS levels between AFFFs and environmental samples are likely due to in-situ biotransformation processes. Biotransformation rates and pathways reported for AFFF-derived primary and secondary precursors varied among different classes of precursors, consistent with the PFAS occurrence in AFFF-impacted environments. For example, readily biodegradable primary precursors, N-dimethyl ammonio propyl perfluoroalkane sulfonamide (AmPr-FASA) and n:2 fluorotelomer thioether amido sulfonate (n:2 FtTAoS), were rarely detected in AFFF-impacted environments. In contrast, key secondary precursors, perfluoroalkane sulfonamides (FASAs) and n:2 fluorotelomer sulfonate (n:2 FTS), were widely detected, which was attributed to their resistance to biotransformation. Key knowledge gaps and future research priorities are presented to better understand the occurrence, fate, and transport of AFFF-derived PFAS in the environment and to design more effective remediation strategies.

A source-based framework to estimate the annual load of PFAS in municipal wastewater

Per- and Polyfluoroalkyl substances (PFAS) are a class of persistent chemicals, whose impact has been observed in various environmental compartments. Wastewater treatment plants (WWTPs) are considered a major emission pathway of PFAS, specifically in the context of the aquatic environment. The goal of this study was to develop a compartmentalized, source-based load estimation model of 7 PFAS within the municipal wastewater influent. Consumer statistics, data from literature on PFAS concentrations and release during use, and specific sampling activities for environmental flows in the related city were used to estimate per capita emission loads. Model results were compared with loads obtained through the monitoring campaign at the municipal WWTP influent. A wide range of discrepancies (≈5 % to ≈90 %) between loads observed in the WWTP influent and source based model estimates was noticed. The loads less accounted by the model were associated with sulfonic acids (PFSAs), whereas for carboxylic acids (PFCAs) most of the observed loads could be reasonably explained by the model, with even an overestimation of nearly 5 % noted for PFNA. Higher heterogeneity in sources was observed in the PFCA group, with a noticeable dominance in the share of consumer products. PFSAs had less of a consumer product input (<20 %), with the rest of the modelled load being attributed to environmental inputs. A large gap of unknown loads of PFSAs indicates a need for examination of other, not yet quantified activities that can potentially explain the remainder of the observed load. Especially commercial activities are considered as potential additional sources for PFSAs. These findings signify the importance of PFAS that originate from both consumer products, as well as environmental inputs in the overall load contribution into the sewage, while identifying the need for further investigation into commercial sources of PFAS emitted into the municipal wastewater.

Inconsistencies in the EU regulatory risk assessment of PFAS call for readjustment

Recognition of per- and polyfluoroalkyl substances (PFAS) as widespread environmental pollutants and a consequent risk to human health, has recently made the European Union (EU) adopt several regulatory measures for their management. The coherence of these measures is challenged by the diversity and the ubiquitous occurrence of PFAS, which also complicates the EU's endeavor to advance justified, harmonized, and transparent approaches in the regulatory assessment of chemical risks. Our study critically reviews the European approach for the risk assessment of PFAS, by applying a comparative analysis of the current and pending regulatory thresholds issued for these chemicals in water bodies, drinking water, and certain foodstuffs. Our study shows that the level of health protection embedded in the studied thresholds may differ by three orders of magnitude, even in similar exposure settings. This is likely to confuse the common understanding of the toxicity and health risks of PFAS and undermine reasonable decision-making and the equal treatment of different stakeholders. We also indicate that currently, no consensus exists on the appropriate level of required health protection regarding PFAS and that the recently adopted tolerable intake value in the EU is too cautious. Based on our analysis, we propose some simple solutions on how the studied regulations and their implicit PFAS thresholds or their application could be improved. We further conclude that instead of setting EU-wide PFAS thresholds for all the environmental compartments, providing the member states with the flexibility to consider case-specific factors, such as regional background concentrations or food consumption rates, in their national regulatory procedures would likely result in more sustainable management of environmental PFAS without compromising the scientific foundation of risk assessment, the legitimacy of the EU policy framework and public health.

Occurrence, source apportionment, and ecological risk of legacy and emerging per- and poly-fluoroalkyl substances (PFASs) in the Dahei river basin of a typical arid region in China

Per- and poly-fluoroalkyl substances (PFASs) are artificial chemicals with broad commercial and industrial applications. Many studies about PFASs have been conducted in densely industrial and populated regions. However, fewer studies have focused on the PFASs' status in a typical arid region. Here, we investigated 30 legacy and emerging PFASs in surface water from the mainstream and tributaries of the Dahei River. Our results revealed that total PFASs concentrations (∑30PFASs) in water ranged from 3.13 to 289.1 ng/L (mean: 25.40 ng/L). Perfluorooctanoic acid (PFOA) had the highest mean concentration of 2.44 ng/L with a 100% detection frequency (DF), followed by perfluorohexanoic acid (PFHxA) (mean concentration: 1.34 ng/L, DF: 59.26%). Also, perfluorohexane sulfonate (DF: 44.44%), perfluorobutane sulfonate (DF: 88.89%), and perfluorooctane sulfonate (PFOS) (DF: 92.59%) had mean concentrations of 12.94, 2.00, and 1.05 ng/L, respectively. Source apportionment through ratio analysis and principal component analysis-multiple linear regression analysis showed that treated or untreated sewage, aqueous film-forming foam, degradation of precursors, and fluoropolymer production were the primary sources. The PFOS alternatives were more prevalent than those of PFOA. Conductivity, total phosphorus, and chlorophyll a positively correlated with Σ30PFASs and total perfluoroalkane sulfonates concentrations. Furthermore, ecological risk assessment showed that more attention should be paid to perfluorooctadecanoic acid, perfluorohexadecanoic acid, perfluorooctane sulfonate, perfluorohexane sulfonate, and (6:2 and 6:2/8:2) polyfluoroalkyl phosphate mono- and di-esters. The mass load of PFASs to the Yellow River was 1.28 kg/year due to the low annual runoff in the Dahei River in the arid region. This study provides baseline data for PFASs in the Dahei River that can aid in the development of effective management strategies for controlling PFASs pollution in typical arid regions in China.

The untold story of PFAS alternatives: Insights into the occurrence, ecotoxicological impacts, and removal strategies in the aquatic environment

Due to increasing regulations on the production and consumption of legacy per- and polyfluoroalkyl substances (PFAS), the global use of PFAS substitutes increased tremendously, posing serious environmental risks owing to their bioaccumulation, toxicity, and lack of removal strategies. This review summarized the spatial distribution of alternative PFAS and their ecological risks in global freshwater and marine ecosystems. Further, toxicological effects of novel PFAS in various freshwater and marine species were highlighted. Moreover, degradation mechanisms for alternative PFAS removal from aquatic environments were compared and discussed. The spatial distribution showed that 6:2 chlorinated polyfluorinated ether sulfonate (6:2 CI-PFAES, also known as F-53B) was the most dominant emerging PFAS found in freshwater. Additionally, the highest levels of PFBS and PFBA were observed in marine waters (West Pacific Ocean). Moreover, short-chain PFAS exhibited higher concentrations than long-chain congeners. The ecological risk quotients (RQs) for phytoplankton were relatively higher >1 than invertebrates, indicating a higher risk for freshwater phytoplankton species. Similarly, in marine water, the majority of PFAS substitutes exhibited negligible risk for invertebrates and fish, and posed elevated risks for phytoplanktons. Reviewed studies showed that alternative PFAS undergo bioaccumulation and cause deleterious effects such as oxidative stress, hepatoxicity, neurotoxicity, histopathological alterations, behavioral and growth abnormalities, reproductive toxicity and metabolism defects in freshwater and marine species. Regarding PFAS treatment methods, photodegradation, photocatalysis, and adsorption showed promising degradation approaches with efficiencies as high as 90%. Finally, research gaps and future perspectives for alternative PFAS toxicological implications and their removal were offered.

Combustion of high-calorific industrial waste in conventional brick kilns: An emerging source of PFAS emissions to agricultural soils

The brick kilns in the South Asian region are widely documented to partially combust high-calorific waste components of synthetic-industrial origin, which contain hazardous constituents, including per- and polyfluoroalkyl substances (PFAS). Correspondingly, these establishments are necessarily built on agricultural land to easily acquire clay by excavating soil horizons, thus making cultivation soils vulnerable to PFAS contaminations. In this pioneering study, the occurrence, distribution profile, traceability and human health risk exposure to forty-four legacy and novel PFAS homologues, including two ultrashort-chain (C2-C3) PFAS, were investigated in agricultural soils around thirty-two conventional brick kilns across three districts of Pakistan. ⅀44PFAS concentrations ranged from 14.3 to 465 ng/g (median: 28.2 ng/g), which were 2 to 70 folds higher than those in background soils, and slightly higher than those reported in agricultural soils in the global literature. The highest occurrence was observed for PFAS alternatives, i.e., 6:2 fluorotelomer sulfonate (6:2 FTSA) (40 %) and 6:2 chlorinated polyfluorinated ether sulfonate (6:2 Cl-PFESA) (4.5 %). A significant positive correlation (p < 0.01) was observed among the concentrations of short-chain perfluoroalkyl acids (C4-C7) and novel PFOS substitutes, implying their origin from common sources. Furthermore, ultrashort-chain and short-chain perfluorocarboxylic acids (PFCA) (89 %) and perfluorosulfonic acids (PFSA) (63 %) dominated over long-chain's PFCA (11 %) and PFSA (37 %), respectively. The estimated daily intake to children exposed in surrounding inhabited communities, at 95th percentile concentrations was found to be approaching the European tolerable daily intake limit of 0.63 ng/kg bw/day. Therefore, the brick manufacturing industry is identified as a novel source of PFAS in the adjacent environment and for residents. This suggests the need for further investigations to elucidate the origin of emerging contaminants in the waste streams of the region to safeguard ecological integrity.

Target and suspect per- and polyfluoroalkyl substances in fish from an AFFF-impacted waterway

A major source of toxic per- and polyfluoroalkyl substances (PFAS) is aqueous film-forming foams (AFFF) used in firefighting and training at airports and military installations, however, PFAS have many additional sources in consumer products and industrial processes. A field study was conducted on fish tissues from three reaches of the Columbia Slough, located near Portland International Airport, OR, that are affected by AFFF and other PFAS sources. Fishes including largescale sucker (Catostomus macrocheilus), goldfish (Carassius auratus), and largemouth bass (Micropterus salmoides) were collected in 2019 and 2020. Fish blood, liver, and fillet (muscle) were analyzed for target and suspect PFAS by liquid chromatography high resolution mass spectrometry (LC-HRMS). Data were analyzed for patterns by fish species, tissue type, and river reach. Thirty-three out of 50 target PFAS and additional suspect compounds were detected at least once during the study, at concentrations up to 856 ng/g. Seven carboxylic acids (PFOA, PFNA, PFDA, PFUdA, PFDoA, PFTrDA, PFTeDA), three sulfonates (PFHxS, PFOS, PFDS), three electrofluorination-based compounds (FBSA, FHxSA, FOSA), and two fluorotelomer-based compounds (8:2 FTS, 10:2 FTS) were the most frequently detected compounds in all tissue types. The C6 (PFHxS) to C10 (PFDS) homologs were detected with PFOS and FHxSA at concentrations 1-3 orders of magnitude greater than the other PFAS detected. This is the first report of Cl-PFOS, FPeSA, and FHpSA detected in fish tissue. In all fish samples, fillet concentrations of PFAS were the lowest, followed by liver, and blood concentrations of PFAS were the highest. Differences in PFAS concentrations were driven primarily by tissue types and to a lesser extent fish species, but weakly by river reach. The Oregon Health Authority modified an existing fish consumption advisory on the Columbia Slough to recommend no whole-body consumption of most fish to avoid elevated levels of PFOS in fish liver. Measured PFAS concentrations in fish tissues indicate the potential for adverse ecological effects.

A genetically-encoded biosensor for direct detection of perfluorooctanoic acid

Determination of per- and polyfluoroalkyl substances (PFAS) in drinking water at the low levels set by regulatory officials has been a major focus for sensor developing researchers. However, it is becoming more apparent that detection of these contaminants in soils, foods and consumer products is relevant and necessary at part per billion and even part per million levels. Here, a fluorescent biosensor for the rapid detection of PFOA was engineered based on human liver fatty acid binding protein (hLFABP). By conjugating circularly permuted green fluorescent protein (cp.GFP) to a split hLFABP construct, the biosensor was able to detect perfluorooctanoic acid PFOA in PBS as well as environmental water samples with LODs of 236 and 330 ppb respectively. Furthermore, E. coli cells cytosolically expressing the protein-based sensor were demonstrated to quickly detect PFOA, demonstrating feasibility of whole-cell sensing. Overall, this work demonstrates a platform technology utilizing a circularly permuted GFP and split hLFABP conjugate as a label-free optical biosensor for PFOA.

Toxic effects of three perfluorinated or polyfluorinated compounds (PFCs) on two strains of freshwater algae: Implications for ecological risk assessments

Perfluorinated or polyfluorinated compounds (PFCs) continue entering to the environmental as individuals or mixtures, but their toxicological information remains largely unknown. Here, we investigated the toxic effects and ecological risks of Perfluorooctane sulfonic acid (PFOS) and its substitutes on prokaryotes (Chlorella vulgaris) and eukaryotes (Microcystis aeruginosa). Based on the calculated EC₅₀ values, the results showed that PFOS was significantly more toxic to both algae than its alternatives including Perfluorobutane sulfonic acid (PFBS) and 6:2 Fluoromodulated sulfonates (6:2 FTS), and the PFOS-PFBS mixture was more toxic to both algae than the other two PFC mixtures. The action mode of binary PFC mixtures on Chlorella vulgaris was mainly shown as antagonistic and on Microcystis aeruginosa as synergistic, by using Combination index (CI) model coupled with Monte Carlo simulation. The mean risk quotient (RQ) value of three individual PFCs and their mixtures were all below the threshold of 10^-1, but the risk of those binary mixtures were higher than that of PFCs individually because of their synergistic effect. Our findings contribute to enhance the understanding of the toxicological information and ecological risks of emerging PFCs and provide a scientific basis for their pollution control.

PFAS in fish from AFFF-impacted environments: Analytical method development and field application at a Canadian international civilian airport

Methods targeting anionic per- and polyfluoroalkyl substances (PFAS) in aquatic biota are well established, but commonly overlook many PFAS classes present in aqueous film-forming foams (AFFFs). Here, we developed an analytical method for the expanded analysis of negative and positive ion mode PFAS in fish tissues. Eight variations of extraction solvents and clean-up protocols were first tested to recover 70 AFFF-derived PFAS from the fish matrix. Anionic, zwitterionic, and cationic PFAS displayed the best responses with methanol-based ultrasonication methods. The response of long-chain PFAS was improved for extracts submitted to graphite filtration alone compared with those involving solid-phase extraction. The validation included an assessment of linearity, absolute recovery, matrix effects, accuracy, intraday/interday precision, and trueness. The method was applied to a set of freshwater fish samples collected in 2020 in the immediate vicinity (creek, n = 15) and downstream (river, n = 15) of an active fire-training area at an international civilian airport in Ontario, Canada. While zwitterionic fluorotelomer betaines were major components of the subsurface AFFF source zone, they were rarely detected in fish, suggesting limited bioaccumulation potential. PFOS largely dominated the PFAS profile, with record-high concentrations in brook sticklebacks (Culaea inconstans) from the creek (16000-110,000 ng/g wet weight whole-body). These levels exceeded the Canadian Federal Environmental Quality Guidelines (FEQG) for PFOS pertaining to the Federal Fish Tissue Guideline (FFTG) for fish protection and Federal Wildlife Diet Guidelines (FWiDG) for the protection of mammalian and avian consumers of aquatic biota. Perfluorohexane sulfonamide and 6:2 fluorotelomer sulfonate were among the precursors detected at the highest levels (maximum of ∼340 ng/g and ∼1100 ng/g, respectively), likely reflecting extensive degradation and/or biotransformation of C6 precursors originally present in AFFF formulations.

Environmental and health impacts of PFAS: Sources, distribution and sustainable management in North Carolina (USA)

Poly- and perfluoroalkyl substances (PFAS) are a class of manufactured chemicals that have recently attracted a great deal of attention from environmental regulators and the general public because of their high prevalence, resistance to degradation, and potential toxicity. This review summarizes the current state of PFAS and its effects on the environment of North Carolina, USA. Specific emphasis has been placed to identify i) the sources of PFAS in North Carolina ii) distribution of PFAS in different environmental segments of North Carolina, including surface water, groundwater, air, and sediment iii) drinking water contamination iv) impact of PFAS on human health v) PFAS accumulation in fish and other biota vi) status of PFAS removal from drinking water and finally vi) socioeconomic impact of PFAS uncertainties. Continuous discharges of PFAS occur in the North Carolina environment from direct and indirect sources, including manufacturing sites, firefighting foam, waste disposal and treatment plants, landfill leachate, and industrial emissions. PFAS are widespread in many environmental segments of North Carolina. They are more likely to be detected in surface and groundwater sediments and can enter aquatic bodies through direct discharge and wet and dry deposition of emissions. Eventually, some adverse effects of PFAS have already been reported in North Carolina residents who could have been exposed to the chemicals through contaminated drinking water. Furthermore, PFAS were also found in blood samples from fish and alligators. PFAS were confirmed to be present in water, sediment, organic compounds, and aquatic species at all levels of the food web. However, there is still a substantial amount of work to be done to understand the actual contamination by PFAS in North Carolina comprehensively.

Occurrence, distribution, and input pathways of per- and polyfluoroalkyl substances in soils near different sources in Shanghai

Per- and polyfluoroalkyl substances (PFAS) are complex emerging pollutants that are widely distributed in soils. The compositions of PFAS vary according to the emission sources. However, the soil distributions of PFAS from different sources are still poorly understood. In this study, the concentrations and compositions of 18 PFAS in soils close to potential sources (industrial areas, airports, landfills, fire stations and agricultural areas) were investigated in Shanghai. The total PFAS concentrations varied from 0.64 to 294 μg kg^-1_d.w.. Among the sites, the highest PFAS concentration was found near the fire station (average = 57.9 μg kg^-1_d.w.), followed by the industrial area (average = 8.53 μg kg^-1_d.w.). The detection frequencies of the 18 PFAS ranged from 47.5% to 100%. Perfluorooctanoic acid (PFOA) and perfluoroheptanoic acid (PFHpA) were detected in all samples. The detection frequencies of PFAS near the fire station were higher than those near other sources. The PFAS in soils were mainly composed of short-chain perfluoroalkyl carboxylic acids (C ≤ 8). Elevated concentrations of long-chain perfluoroalkyl carboxylic acids (C > 12) were found in industrial area. Principal component analysis revealed that long-chain PFAS had different factor loadings compared to short-chain PFAS. With the exception of agricultural soils, the correlations between individual PFAS were more positive than negative. Strong positive correlations were found within three groups of perfluoroalkyl carboxylic acids (C5-C7, C9-C12, and C14-C18), suggesting their similar inputs and transportation pathways. The PFAS in soils around the fire station were likely directly emitted from a point source. In contrast, the PFAS in soils near the other sites had multiple input pathways, including both direct emission and precursor degradation.