Metallic nanoparticles for catalytic reduction of toxic hexavalent chromium from aqueous medium: A state-of-the-art review

Implementing magnetically-active Sn-based nanocomposites in hexavalent chromium removal from drinking water

A novel nanocomposite consisting of Fe3O4-loaded tin oxyhydroxy-chloride is demonstrated as an efficient adsorbent for the removal of hexavalent chromium in compliance to the new drinking water regulation. This study introduces a continuous-flow production of the nanocomposite through the separate synthesis of (i) 40 nm Fe3O4 nanoparticles and (ii) multilayered spherical arrangements of a tin hydroxy-chloride identified as abhurite, before the application of a wet-blending process. The homogeneous distribution of Fe3O4 nanoparticles on the abhurite's morphology, features nanocomposite with magnetic response whereas the 10 % loaded nanocomposite preserves a Cr(VI) uptake capacity of 7.2 mg/g for residual concentrations below 25 μg/L. Kinetic and thermodynamic examination of the uptake evolution indicates a relative rapid Cr(VI) capture dominated by interparticle diffusion and a spontaneous endothermic process mediated by reduction to Cr(III). The efficiency of the optimized nanocomposite was validated in a pilot unit operating in a sequence of a stirring reactor and a rotary magnetic separator showing an alternative and competitive application path than typical fixed-bed filtration, which is supported by the absence of any acute cellular toxicity according to human kidney cell viability tests.

Chitosan-sunflower meal biochar hydrogel incorporated with green synthesized NiO nanoparticles for enhanced catalytic reduction of anthropogenic water pollutants

Anthropogenic activities have been one of the crucial driving factors for water pollution globally, thereby warranting a sustainable strategy for its redressal. In this study, we have developed a hydrogel-biochar nanocomposite for catalytic reduction of water pollutants. To begin with, green synthesis of nickel oxide nanoparticles (NiO NPs) was accomplished from waste kinnow peel extract via the environmentally benign microwave method. The formation of NiO NPs was affirmed from different analytical techniques namely ultraviolet-visible (UV-Vis), Fourier transform infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy-dispersive spectroscopy (EDS). The FESEM images revealed spherical nature of NiO NPs. The average particle size was found to be 15.61 nm from XRD data. A novel hydrogel-biochar nanocomposite comprising the green NiO NPs, sunflower meal biochar and chitosan was prepared (Cs-biochar@ NiO) and explored as a nanocatalyst towards catalytic reduction of pollutants such as 4-nitrophenol, potassium hexacyanoferrate (III) and organic dyes methyl orange (MO), Congo red (CR), methylene blue (MB) in the presence of a reducing agent, i.e. NaBH4. Under optimized conditions, the reduction reactions were completed by 120 s and 60 s for 4-NP and potassium hexacyanoferrate (III) respectively and the rate constants were estimated to be 0.044 s-1 and 0.110 s-1. The rate of reduction was found to be faster for the dyes and the respective rate constants were 0.213 s-1 for MO, 0.213 s-1 for CR and 0.135 s-1 for MB. The assessment of the nanocatalyst in the reduction of binary dye systems depicted its selectivity towards the anionic dyes CR and MO. The nanocatalyst displayed effective reduction of dyes in real-water samples collected from different sources. Taken altogether, this study validates the design of sustainable hydrogel-biochar nanocatalyst for the efficient reduction of hazardous anthropogenic water pollutants.

Cr (VI)-induced ribosomal DNA copy number variation is associated with semen quality impairment: Evidence from human to animal study

OBJECTIVES

This study aimed to analyze the possible role of rDNA copy number variation in the association between hexavalent chromium [Cr (VI)] exposure and semen quality in semen donors and further confirm this association in mice.

METHODS

In this cross-sectional study, whole blood and semen samples were collected from 155 semen donors in the Zhejiang Human Sperm Bank from January 1st to April 31st, 2021. Adult C57BL/6 J male mice were treated with different doses of Cr (VI) (0, 10, or 15 mg/kg b.w./day). Semen quality, including semen volume, total spermatozoa count, sperm concentration, progressive motility, and total motility, were analyzed according to the WHO laboratory manual. Cr concentration was detected using inductively coupled plasma mass spectrometry. The rDNA copy number was measured using qPCR.

RESULTS

In semen donors, whole blood Cr concentration was negatively associated with semen concentration and total sperm counts. Semen 5 S and 45 S rDNA copy numbers were negatively associated with whole blood Cr concentration and whole blood 5.8 S rDNA copy number was negatively associated with semen Cr concentration. In mice, Cr (VI) damaged testicular tissue, decreased semen quality, and caused rDNA copy number variation. Semen quality was related to the rDNA copy number in whole blood, testicular tissue, and semen samples in mice.

CONCLUSION

Cr (VI) was associated with decreased semen quality in semen donors and mice. Our findings suggest an in-depth analysis of the role of the rDNA copy number variation in the Cr (VI)-induced impairment of semen quality.

Green NiO nanoparticle-integrated PVA-alginate hydrogel: potent nanocatalyst for efficient reduction of anthropogenic water pollutants

Hydrogel nanocatalyst composed of nickel oxide (NiO) nanoparticles embedded in PVA-alginate hydrogels were potentially explored toward the reduction of anthropogenic water pollutants. The NiO nanoparticles was accomplished via green method using waste pineapple peel extract. The formation of the nanoparticles was affirmed from different analytical techniques such as UV-Vis, FTIR, XRD, TGA, FESEM, and EDS. Spherical NiO nanoparticles were obtained having an average size of 11.5 nm. The nano NiO were then integrated into PVA-alginate hydrogel matrix forming a nanocomposite hydrogel (PVALg@ NiO). The integration of nano NiO rendered an improved thermal stability to the parent hydrogel. The PVALg@ NiO hydrogel was utilized as a catalyst in the reduction of 4-nitrophenol (4-NP), potassium hexacyanoferrate (III), rhodamine B (RhB), methyl orange (MO), and malachite green (MG) in the presence of a reducing agent, i.e., NaBH4. Under optimized conditions, the reduction reactions were completed by 4.0 min and 3.0 min for 4-NP and potassium hexacyanoferrate (III), respectively, and the rate constant was estimated to be 1.14 min-1 and 2.15 min-1. The rate of reduction was found to be faster for the dyes and the respective rate constants were be 0.17 s-1 for RhB, MG and 0.05 s-1 for MO. The PVALg@ NiO hydrogel nanocatalyst demonstrated a recyclability of four runs without any perceptible diminution in its catalytic mettle. The efficacy of the PVALg@ NiO hydrogel nanocatalyst was further examined for the reduction of dyes in real water samples collected from different sources and the results affirm its high catalytic potential. Thus, this study paves the path for the development of a sustainable hydrogel nanocatalyst for reduction of hazardous pollutants in wastewater treatment.

Cellulose/GO monolith covered with Pd-Pt bimetallic nanocrystals for continuous-flow catalytic reduction of hexavalent chromium

Cellulose monolith materials have interconnected open porous structures with very high porosity, making them attractive structures for use as support materials in heterogeneous catalysis applications. In this study, we developed a highly efficient and reusable continuous-flow reactor for Cr(VI) remediation by combining the advantageous features of cellulose monoliths with suitable reinforcement techniques. We fabricated a porous monolithic cellulose/graphene oxide (GO) composite with a continuous three-dimensional skeletal framework using the thermally induced phase separation technique. Pd nanocrystals were synthesized in situ on the surface of the composite monolith, and then converted to porous Pd-Pt bimetallic nanocrystals through a galvanic replacement reaction. This approach eliminated the need for additional reductants and stabilizers, making the process simpler and more environmentally friendly. Under carefully optimized conditions, the cellulose/GO/Pd-Pt nanocomposite monolith exhibited outstanding performance in continuous-flow reactions for Cr(VI) reduction, achieving a maximum conversion rate of 98 %. Moreover, the nanocomposite monolith-based heterogeneous catalyst exhibited remarkable long-term stability, maintaining its catalytic activity even after extended periods of storage in the dried state. These findings highlight the potential of cellulose-based composite monoliths as versatile and robust support materials for heterogeneous catalysis.

Cost-effective removal of Cr(VI) ions from aqueous media using L-cysteine functionalized gold nanoparticles embedded in melamine-based covalent organic framework (Cys-AuNPs@COF)

Due to the growing concern about the environmental effects of heavy metals, researchers are developing materials that possess high absorption capacity in addition to selectivity and high absorption speed. Recently, covalent organic frameworks (COFs) have been considered as emerging and promising adsorbents for the removal of many types of pollutants. In this work, a novel and selective adsorbent (Cys-AuNPs@COF) was prepared by embedding gold nanoparticles functionalized with L-cysteine in melamine-based COF for the removal of Cr(VI) ions from wastewater. The synthesized Cys-AuNPs@COF were characterizedby Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDX), Thermo-gravimetric analysis (TGA), and elemental mapping (EMA) analysis. The removal of Cr(VI) ions was performed using a batch mode process by taking advantage of response surface methodology (RSM) based on a central composite design (CCD) model. The maximum adsorption capacity of Cys-AuNPs@COF was 151.5 mg g-1. The experimental results followed the Langmuir model and showed pseudo-second-order kinetics. A portable, low-cost, and highly sensitive device with a smartphone colorimeter platform was developed for in situ measurement of trace amounts of chromium (VI) ions. Due to its simplicity and versatility, this method has the potential to serve as an alternative to conventional field analysis methods.

Preparation of microbial agent immobilized composites for Cr(VI) removal from wastewater

Because of its extreme toxicity and health risks, hexavalent chromium [Cr(VI)] has been identified as a major environmental contaminant. Bioreduction is considered as one of effective techniques for cleaning up Cr(VI)-contaminated sites, but the remediation efficiency needs to be enhanced. Here, a novel immobilized microbial agent was produced by immobilizing Bacillus cereus ZY-2009 with sodium alginate (SA) using polyvinyl alcohol (PVA) and activated carbon (AC). To evaluate the decrease of Cr(VI) by immobilized bacterial agents, batch tests were conducted with varying immobilization conditions, immobilization carriers, and dosages of medication. The removal of Cr(VI) by the agent prepared by the composite immobilization method was better than that by the adsorption and encapsulation methods. The optimal preparation conditions were the fraction of magnetic PVA was 5.00%, the fraction of SA was 4.00%, the fraction of CaCl2 was 4.00%, and the calcification time was 12 h. The experimental results indicated that PVA/SA/AC agents accelerated the reduction rate of Cr(VI). The removal rate of Cr(VI) by immobilized cells (90.5%) under ideal conditions was substantially higher than that of free cells (11.0%). This novel agent had a large specific surface area and a rich pore structure, accounting for its high reduction rate. The results suggest that the PVA/SA/AC immobilized Bacillus cereus ZY-2009 agent has great potential to remove Cr(VI) from wastewater treatment systems.

Simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range by using magnetic chitosan-based biopolymer

The simultaneous reduction of Cr(VI) and sequestration of the resulting Cr(III) in one process is highly desirable as a cost-effective and environmental-friendly approach for the decontamination of Cr(VI)-polluted wastewater. However, most of the existing adsorptive materials are only effective in low pH environments (pH = 1-3), severely restricting the adsorption efficiency and cost effectiveness. Herein, we proposed a chitosan-based magnetic porous microsphere (PPy@PMCS) for simultaneous Cr(VI) reduction and Cr(III) sequestration in a wide pH range. Benefiting from its abundant interaction sites, Cr(VI) was effectively adsorbed on the surface and then immediately reduced to Cr(III) with much lower toxicity. Most importantly, the resulting Cr(III) was in-situ sequestrated by the complexation of chitosan matrix. As a result, PPy@PMCS exhibited a maximum Cr(VI) adsorption capacity of 330.42 mg/g at pH 2.0 and an adsorption capacity of 167.82 mg/g even at near neutral pH (6.0), which is superior to most reported adsorbents. Furthermore, the exhausted PPy@PMCS can be rapidly separated from solutions under an external magnetic field and facilely regenerated. The proposed novel biopolymer-based material shows great application potentials in wastewater treatment.

Addressing the issue of surface mechanisms and competitive effects in Cr(VI) reductive-adsorption on tin-hydroxyapatite in the presence of co-ions

Our group recently proposed an innovative sustainable reductant-adsorbent material, tin(II)-hydroxyapatite (Sn/HAP, ca. 10 wt% Sn) for the interfacial Cr(VI) reductive adsorption process. In this study, Cr(VI) removal capacity was evaluated in multi-component solutions containing representative background ions (i.e., CaCl2, Ca(NO3)2, MgSO4, Na2SO4, Fe(NO3)3, AlCl3, Zn(NO3)2, or Mn(NO3)2). Sn/HAP was able to reduce Cr(VI) with complete Cr3+ adsorption on HAP surface, except in the presence of Fe3+ and Al3+ ions. Some metal ions co-existing in solution, such as Fe3+, Al3+, Zn2+, and Mn2+, were also adsorbed on HAP surface. Reuse experiments of the Sn/HAP sample, up to 7 runs, resulted in a total amount of reduced Cr(VI) of ca. 15-18 mg g-1. Fast kinetics of Cr(VI) reductive adsorption at 25 °C in a multi-metal component solution was observed. The pseudo-second order model was in excellent agreement with the experimental kinetic data, leading to a rate constant (k25°C) value of ca. 30 M-1 s-1. The collection of adsorption isotherms of Cr3+ and Fe3+, together with TEM-EDX analysis permitted the unveiling of competitive adsorption phenomena between metal ions. The obtained results demonstrate that Sn/HAP could be an efficient material for the removal of hexavalent chromium in aqueous solutions containing high concentrations of inorganic impurities.

Nanoparticles-induced potential toxicity on human health: Applications, toxicity mechanisms, and evaluation models

Nanoparticles (NPs) have become one of the most popular objects of scientific study during the past decades. However, despite wealth of study reports, still there is a gap, particularly in health toxicology studies, underlying mechanisms, and related evaluation models to deeply understanding the NPs risk effects. In this review, we first present a comprehensive landscape of the applications of NPs on health, especially addressing the role of NPs in medical diagnosis, therapy. Then, the toxicity of NPs on health systems is introduced. We describe in detail the effects of NPs on various systems, including respiratory, nervous, endocrine, immune, and reproductive systems, and the carcinogenicity of NPs. Furthermore, we unravels the underlying mechanisms of NPs including ROS accumulation, mitochondrial damage, inflammatory reaction, apoptosis, DNA damage, cell cycle, and epigenetic regulation. In addition, the classical study models such as cell lines and mice and the emerging models such as 3D organoids used for evaluating the toxicity or scientific study are both introduced. Overall, this review presents a critical summary and evaluation of the state of understanding of NPs, giving readers more better understanding of the NPs toxicology to remedy key gaps in knowledge and techniques.

Concurrent reductive decontamination of chromium (VI) and uranium (VI) in groundwater by Fe(0)-based autotrophic bioprocess

The co-presence of chromium (VI) [Cr(VI)] and uranium (VI) [U(VI)] is widely found in groundwater, imposing severe risks on human health. Although zerovalent iron [Fe(0)] supports superb performance for bioreduction of Cr(VI) and U(VI) individually, the biogeochemical process involving their concurrent removal with Fe(0) as electron donor remains unexplored. In the 6-d batch study, 86.1% ± 0.7% of Cr(VI) was preferentially eliminated, while 78.4% ± 0.5% of U(VI) removal was achieved simultaneously. Efficient removal of Cr(VI) (100%) and U(VI) (51.2% ∼ 100%) was also obtained in a continuous 160-d column experiment. As a result, Cr(VI) and U(VI) were reduced to less mobile Cr(III) and insoluble U(IV), respectively. 16 S rRNA sequencing was performed to investigate the dynamics of microbial community. Delftia, Acinetobacter, Pseudomonas and Desulfomicrobium were the major contributors mediating the bioreduction process. The initial Cr(VI) and hydraulic retention time (HRT) incurred pronounced effects on community diversity, which in turn altered the reactor's performance. The enrichment of Cr(VI) resistance (chrA), U(VI) reduction (dsrA) and Fe(II) oxidation (mtrA) genes were observed by reverse transcription qPCR. Cytochrome c, glutathione and NADH as well as VFAs and gas metabolites also involved in the bioprocess. This study demonstrated a promising approach for removing the combined contaminants of Cr(VI) and U(VI) in groundwater.

Research Progress of Treatment Technology and Adsorption Materials for Removing Chromate in the Environment

Cr is used extensively in industry, so the number of Cr (VI) hazards is increasing. The effective control and removal of Cr (VI) from the environment are becoming an increasing research priority. In order to provide a more comprehensive description of the research progress of chromate adsorption materials, this paper summarizes the articles describing chromate adsorption in the past five years. It summarizes the adsorption principles, adsorbent types, and adsorption effects to provide methods and ideas to solve the chromate pollution problem further. After research, it is found that many adsorbents reduce adsorption when there is too much charge in the water. Besides, to ensure adsorption efficiency, there are problems with the formability of some materials, which impact recycling.

Transport of Chromium(VI) across a Supported Liquid Membrane Containing Cyanex 921 or Cyanex 923 Dissolved in Solvesso 100 as Carrier Phase: Estimation of Diffusional Parameters

An investigation of chromium(VI) transport across a supported liquid membrane containing the phosphine oxides Cyanex 921 and Cyanex 923 dissolved in Solvesso 100 as carrier phases was carried out in batch operation mode. Chromium(VI) transport was investigated as a function of different variables: hydrodynamic conditions in the feed (1000-1600 min^-1) and stripping (600-1500 min^-1) phases, HCl (0.25-2 M) and indium (0.01-0.1 g/L) concentrations in the feed phase, and carrier (0.01 M-0.75 M) concentration in the membrane phase. Indium was recovered in the stripping phase using hydrazine sulphate solutions, and, at the same time, chromium(VI) was reduced to the less harmful Cr(III) oxidation state. Models describing the transport mechanism comprising a diffusion process through the feed aqueous diffusion layer, fast interfacial chemical reaction, and diffusion of the respective chromium(VI)-phosphine oxide complexes across the membrane were developed. The equations describing the rate of transport correlate the membrane permeability coefficient with diffusion and equilibrium parameters, as well as the chemical compositions of the respective metal-carrier phases. The models were used to calculate diffusional parameters for each metal-carrier system, and the minimum thickness of the feed boundary layer was calculated as 1 × 10^-3 cm and 6.3 × 10^-4 cm for the Cr(VI)-Cyanex 921 and Cr(VI)-Cyanex 923 systems, respectively.

Xanthan Gum-Mediated Silver Nanoparticles for Ultrasensitive Electrochemical Detection of Hg2+ Ions from Water

An environmentally safe, efficient, and economical microwave-assisted technique was selected for the production of silver nanoparticles (AgNPs). To prepare uniformly disseminated AgNPs, xanthan gum (XG) was utilized as both a reducing and capping agent. UV–Vis spectroscopy was used to characterize the formed XG-AgNPs, with the absorption band regulated at 414 nm under optimized parameters. Atomic force microscopy was used to reveal the size and shape of XG-AgNPs. The interactions between the XG capping agent and AgNPs observed using Fourier transform infrared spectroscopy. The XG-AgNPs were placed in between glassy carbon electrode and Nafion® surfaces and then deployed as sensors for voltammetric evaluation of mercury ions (Hg2+) using square-wave voltammetry as an analytical mode. Required Nafion® quantities, electrode behavior, electrolyte characteristics, pH, initial potentials, accumulation potentials, and accumulation durations were all comprehensively investigated. In addition, an electrochemical mechanism for the oxidation of Hg2+ was postulated. With an exceptional limit of detection of 0.18 ppb and an R2 value of 0.981, the sensors’ measured linear response range was 0.0007–0.002 µM Hg2+. Hg2+ evaluations were ultimately unaffected by the presence of many coexisting metal ions (Cd2+, Pb2+, Cr2O4, Co2+,Cu2+, CuSO4). Spiked water samples were tested using the described approach, with Hg2+ recoveries ranging from 97% to 100%.

Advances in the Removal of Cr(III) from Spent Industrial Effluents-A Review

The review presents advances in the removal of Cr(III) from the industrial effluents published in the last ten years. Although Cr(III) has low solubility and is less dangerous for the aquatic environment than Cr(VI), it cannot be released into the aquatic environment without limitations and its content in water should be restricted. The development of efficient techniques for the removal of Cr(III) is also a response to the problem of chromium wastewater containing Cr(VI) ions. Very often the first step in dealing with such wastewater is the reduction in chromium content. In some cases, removal of Cr(III) from wastewaters is an important step for pretreatment of solutions to prepare them for subsequent recovery of other metals. In the review, hydrometallurgical operations for Cr(III) removal are presented, including examples of Cr(III) recovery from real industrial effluents with precipitation, adsorption, ion exchange, extraction, membrane techniques, microbial-enhanced techniques, electrochemical methods. The advantages and disadvantages of the operations mentioned are also presented. Finally, perspectives for the future in line with circular economy and low-environmental impact are briefly discussed.

Essential Mineral Content (Fe, Mg, P, Mn, K, Ca, and Na) in Five Wild Edible Species of Lactarius Mushrooms from Southern Spain and Northern Morocco: Reference to Daily Intake

Mushroom consumption has increased in recent years due to their beneficial properties to the proper functioning of the body. Within this framework, the high potential of mushrooms as a source of essential elements has been reported. Therefore, the present study aims to determine the mineral content of seven essential metals, Fe, Mg, Mn, P, K, Ca, and Na, in twenty samples of mushrooms of the genus Lactarius collected from various locations in southern Spain and northern Morocco, by FAAS, UV-Vis spectroscopy, and ICP-OES after acid digestion. Statistics showed that K was the macronutrient found at the highest levels in all mushrooms studied. ANOVA showed that there were statistically significant differences among the species for K, P, and Na. The multivariate study suggested that there were differences between the accumulation of the elements according to the geographic location and species. Furthermore, the intake of 300 g of fresh mushrooms of each sample covers a high percentage of the RDI, but does not meet the recommended daily intake (RDI) for any of the metals studied, except for Fe. Even considering these benefits, the consumption of mushrooms should be moderated due to the presence of toxic metals, which may pose health risks.

Preparation and Application of Graphene–Based Materials for Heavy Metal Removal in Tobacco Industry: A Review

Heavy metals are nondegradable in the natural environment and harmful to the ecological system and human beings, causing an increased environmental pollution problem. It is required to remove heavy metals from wastewater urgently. Up until now, various methods have been involved in the heavy metal removals, such as chemical precipitation, chemical reduction, electrochemical, membrane separation, ion exchange, biological, and adsorption methods. Among them, adsorption by graphene–based materials has attracted much more attentions for the removal of heavy metals from wastewater systems in recent years, arising due to their large specific surface area, high adsorption capacity, high removal efficiency, and good recyclability. Therefore, it is quite important to review the heavy metal removal with the graphene–based material. In this review, we have summarized the physicochemical property and preparation methods of graphene and their adsorption property to heavy metals. The influencing parameters for the removal of heavy metals by graphene–based materials have been discussed. In addition, the modification of graphene–based materials to enhance their adsorption capability for heavy metal removal is also reviewed. The heavy metal removal by modified graphene–based materials in the tobacco industry has been especially described in detail. Finally, the future trend for graphene–based materials in the field of heavy metal wastewater treatment is proposed. This knowledge will have great impacts on the field and facilitate the researchers to seek the new functionalization method for graphene–based materials with high adsorption capacity to heavy metals in the tobacco industry in the future.

Carbide-derived carbon as an extraordinary material for the removal of chromium from an aqueous solution

In the present work, the adsorptive removal of chromium (Cr) from water by carbide-derived carbon (CDC) was investigated. The morphology and structure of the CDC were characterized by using FTIR, SEM, TEM, XRD, and N₂ adsorption-desorption measurements. The effect of adsorption parameters including contact time, initial Cr concentration, temperature, initial solution pH, and CDC dosage was examined on the removal of Cr ions. The kinetic analysis revealed that the experimental data on the removal of Cr ions on CDC is well correlated with the pseudo-second order kinetic model (with R² > 0.999), while the equilibrium data were fitted by the Redlich-Peterson isotherm model (with R² > 0.992). The Langmuir and Sips models were also in good compliance with the equilibrium data, indicating a monolayer coverage of Cr ions onto the CDC surface with some heterogeneous active adsorption sites. The CDC revealed a notable Langmuir adsorption capacity of 159.1 mg/g for Cr ions at pH 6 and room temperature. The thermodynamic analysis illustrated that the Cr ions elimination by CDC is a feasible adsorption process and endothermic in nature. After five adsorption/desorption cycles, less than 18% reduction in the adsorption capacity was obtained indicating the stability and reusability of the CDC. Moreover, the CDC demonstrated an excellent potential in removing the Cr ions from real brackish water. According to the adsorption data, both physical and chemical adsorption processes occurred, and the adsorption was mainly controlled by electrostatic interactions with a possible reduction of hexavalent Cr to trivalent Cr at acidic conditions.

Efficient removal of Cr(VI) at alkaline pHs by sulfite/iodide/UV: Mechanism and modeling

Efficient removal of toxic hexavalent chromium (Cr(VI)) under alkaline conditions is still a challenge due to the relatively low reactivity of CrO₄^2-. This study proposed a new sulfite/iodide/UV process to remove Cr(VI). The removal of Cr(VI) followed pseudo-zero-order kinetics at alkaline pHs, and was enhanced by sulfite and iodide with synergy. Compared with sulfite/UV, iodide in sulfite/iodide/UV showed about 40 times higher concentration-normalized enhancement for Cr(VI) removal, and reduced the requirement of sulfite ([S(IV)]₀/[Cr(VI)]₀ of about 2.1:1) by more than 90%. The Cr(VI) removal was accelerated by decreasing pH and by increasing temperature, and was slightly influenced by dissolved oxygen, carbonate, and humic acid. The process was still effective in real surface water and industrial wastewater. Mechanism and pathways of Cr(VI) removal were revealed by quenching experiments, competition kinetic analysis, product identification and quantification, and mass and electron balance. Both e_aq^- and SO₃^•- were responsible for Cr(VI) removal, making contributions of about 75% and 25%, respectively. When e_aq^- mainly reacted with Cr(VI), SO₃^•- participated in reduction of Cr(V) and Cr(IV) intermediates, with Cr(III), S₂O₆^2-, and SO₄^2- as the final products. A model was developed to predict removal kinetics of Cr(VI), and well interpreted the roles of S(IV) and iodide in the process. This study sheds light on mechanism of Cr(VI) removal at alkaline pHs by kinetic modeling, and thus advances the applicability of this promising process for water decontamination.

Reductive removal of selenate (VI) in aqueous solution using rhodium metal particles supported on TiO2

Selenium and its compounds in high concentration are toxic for humans, especially selenate (VI) is the most toxic due to its high solubility in water. To promote the reductive reaction of Se(vi) to Se(iv) or Se(0), which is relatively easy to remove in water, noble metal particles were added as reaction sites with a reductant. The highest removal performance of selenate in aqueous solution was achieved using rhodium particles supported on TiO₂ (Rh/TiO₂). Selenate was rapidly reduced with hydrazine on the metal particle, leading to a selenium deposition on the particle inhibiting the stable reductive reaction. On the other hand, when a weaker reductant such as formaldehyde was used for the selenate reduction, the selenium deposition was suppressed due to its low reactivity, resulting in a stable reductive reaction of selenate in water.