New insights into the mechanism of Fered-Fenton treatment of industrial wastewater with high chloride content: Role of multiple reactive species

Exploring the viability of peracetic acid-mediated antibiotic degradation in wastewater through activation with electrogenerated HClO

Electrochemical advanced oxidation processes (EAOPs) face challenging conditions in chloride media, owing to the co-generation of undesirable Cl-disinfection byproducts (Cl-DBPs). Herein, the synergistic activation between in-situ electrogenerated HClO and peracetic acid (PAA)-based reactive species in actual wastewater is discussed. A metal-free graphene-modified graphite felt (graphene/GF) cathode is used for the first time to achieve the electrochemically-mediated activation of PAA. The PAA/Cl- system allowed a near-complete sulfamethoxazole (SMX) degradation (kobs =0.49 min-1) in only 5 min in a model solution, inducing 32.7- and 8.2-fold rise in kobs as compared to single PAA and Cl- systems, respectively. Such enhancement is attributed to the occurrence of 1O2 (25.5 μmol L-1 after 5 min of electrolysis) from the thermodynamically favored reaction between HClO and PAA-based reactive species. The antibiotic degradation in a complex water matrix was further considered. The SMX removal is slightly susceptible to the coexisting natural organic matter, with both the acute cytotoxicity (ACT) and the yield of 12 DBPs decreasing by 29.4 % and 37.3 %, respectively. According to calculations, HClO accumulation and organic Cl-addition reactions are thermodynamically unfavored. This study provides a scenario-oriented paradigm for PAA-based electrochemical treatment technology, being particularly appealing for treating wastewater rich in Cl- ion, which may derive in toxic Cl-DBPs.

Hypochlorite-mediated degradation and detoxification of sulfathiazole in aqueous solution and soil slurry

Although various activated sodium hypochlorite (NaClO) systems were proven to be promising strategies for recalcitrant organics treatment, the direct interaction between NaClO and pollutants without explicit activation is quite limited. In this work, a revolutionary approach to degrade sulfathiazole (STZ) in aqueous and soil slurry by single NaClO without any activator was proposed. The results demonstrated that 100% and 94.11% of STZ could be degraded by 0.025 mM and 5 mM NaClO in water and soil slurry, respectively. The elimination of STZ was shown to involve superoxide anion (O2•-), chlorine oxygen radical (ClO•), and hydroxyl radical (•OH), according to quenching experiments and the analysis of electron paramagnetic resonance. The addition of Cl-, HCO3-, SO42-, and humic acid (HA) marginally impeded the decomposition of STZ, while NO3-, Fe3+, and Mn2+ facilitated the process. The NaClO process exhibited significant removal effectiveness at a neutral initial pH. Moreover, the NaClO facilitated application in various soil samples and water matrices, and the procedure was also successful in effectively eliminating a range of sulfonamides. The suggested NaClO degradation mechanism of STZ was based on the observed intermediates, and the majority of the products exhibited lower ecotoxicity than STZ. Besides, the experiment results by using X-ray diffraction (XRD) and a fourier transform infrared spectrometer (FTIR) indicated the negligible effects on the composition and structure of soil by the treatment of NaClO. Simultaneously, the experimental results also illustrated that the bioavailability of heavy metals and the physiochemical characteristics of the soil before and after the remediation did not change to a significant extent. Following the remediation of NaClO, the phytotoxicity tests showed reduced toxicity to wheat and cucumber seeds. As a result, treating soil and water contaminated with STZ by using NaClO was a reasonably practical and eco-friendly method.

A Fenton-based approach at neutral and un-conditioned pH for recalcitrant COD removal in tannery wastewater: Experimental test and sludge characterization

The combination of raw animal skin manufacturing processes involves the use of large amounts of chemicals, resulting in the generation of complex and highly polluted tannery wastewater. In this context, the high concentration of chloride in tannery wastewater represents a crucial bottleneck. Indeed, sodium chloride, commonly used in tannery industry to prevent skin rot, increases the concentration of chlorides up to 50 %. At the same time, most of the advanced oxidation processes usually employed in tannery wastewater treatment to remove recalcitrant COD involve the use of conditioning agents, thus increasing the overall concentration of chlorides in the treated effluent. The aim of this study was to evaluate the electrochemical peroxidation process (ECP) efficiency in the treatment of tannery wastewater without changing pH, to improve Fenton technology by avoiding the use of chemicals. The influence of different electric currents on COD and color removal was investigated. The characterization of the produced sludge was conducted through FTIR, SEM and XRD analysis, exploring the morphology and composition of precipitate, depending on the applied current. Although an electrical current of 750 mA yields the highest COD and color removal efficiency (69.7 % and 97.8 %, respectively), 500 mA can be considered the best compromise because of energy consumptions. Iron oxides and hydroxides were generated during the ECP process, playing the role of coagulants through the absorption of organic and inorganic contaminants. The consumption of energy increased as a function of time and applied current; however, cost analysis showed that the electrodes contributed the most to the total cost of the process. In authors' knowledge, the application of ECP process as a tertiary treatment for the removal of recalcitrant COD in tannery wastewater represents a novelty in the literature and the results obtained can be considered as the basis for scaling up the process in future research.

Sequential use of a continuous-flow electrocoagulation reactor and a (photo)electro-Fenton recirculation system for the treatment of Acid Brown 14 diazo dye

The decolorization and TOC removal of solutions of Acid Brown 14 (AB14) diazo dye containing 50 mg L-1 of total organic carbon (TOC) have been first studied in a continuous-flow electrocoagulation (EC) reactor of 3 L capacity with Fe electrodes of ∼110 cm2 area each. Total loss of color with poor TOC removal was found in chloride, sulfate, and/or hydrogen carbonate matrices after 18 min of this treatment. The best performance was found using 5 anodes and 4 cathodes of Fe at 13.70 A and low liquid flow rate of 10 L h-1, in aerated 39.6 mM NaCl medium within a pH range of 4.0-10.0. The effluent obtained from EC was further treated by electro-Fenton (EF) using a 2.5 L pre-pilot flow plant, which was equipped with a filter-press cell comprising a Pt anode and an air-diffusion cathode for H2O2 electrogeneration. Operating with 0.10-1.0 mM Fe2+ as catalyst at pH 3.0 and 50 mA cm-2, a similar TOC removal of 68 % was found as maximal in chloride and sulfate media using the sequential EC-EF process. The EC-treated solutions were also treated by photoelectro-Fenton (PEF) employing a photoreactor with a 125 W UVA lamp. The sequential EC-PEF process yielded a much higher TOC reduction, close to 90 % and 97 % in chloride and sulfate media, respectively, due to the rapid photolysis of the final Fe(III)-carboxylate complexes. The formation of recalcitrant chloroderivatives from generated active chlorine limited the mineralization in the chloride matrix. For practical applications of this two-step technology, the high energy consumption of the UVA lamp in PEF could be reduced by using free sunlight.

Systematic analysis of the scientific-technological production on the use of the UV, H2O2, and/or Cl2 systems in the elimination of bacteria and associated antibiotic resistance genes

This study presents a systematic review of the scientific and technological production related to the use of systems based on UV, H2O2, and Cl2 for the elimination of antibiotic-resistant bacteria (ARB) and genes associated with antibiotic resistance (ARGs). Using the Pro Know-C (Knowledge Development Process-Constructivist) methodology, a portfolio was created and analyzed that includes 19 articles and 18 patents published between 2011 and 2022. The results show a greater scientific-technological production in UV irradiation systems (8 articles and 5 patents) and the binary combination UV/H2O2 (9 articles and 4 patents). It was emphasized that UV irradiation alone focuses mainly on the removal of ARB, while the addition of H2O2 or Cl2, either individually or in binary combinations with UV, enhances the removal of ARB and ARG. The need for further research on the UV/H2O2/Cl2 system is emphasized, as gaps in the scientific-technological production of this system (0 articles and 2 patents), especially in its electrochemically assisted implementation, have been identified. Despite the gaps identified, there are promising prospects for the use of combined electrochemically assisted UV/H2O2/Cl2 disinfection systems. This is demonstrated by the effective removal of a wide range of contaminants, including ARB, fungi, and viruses, as well as microorganisms resistant to conventional disinfectants, while reducing the formation of toxic by-products.