NH2-MIL-53(Al) and NH2-MIL-101(Al) in sulfur-containing copolyimide mixed matrix membranes for gas separation

Effect of pyrolysis temperature on characteristics and chloramphenicol adsorption performance of NH2-MIL-53(Al)-derived amine-functionalized porous carbons

Several activities such as aquaculture, human and feedstock therapies can directly release antibiotics into water. Due to high stability, low hydrolysis and non-biodegradation, they can accumulate in the aqueous environment and transport to aquatic species. Here, we synthesized amine-functionalized porous carbons (ANC) by a direct-pyrolysis process of NH2-MIL-53(Al) as a sacrificial template at between 600 and 900 °C and utilized them to eliminate chloramphenicol antibiotic from water. The NH2-MIL-53(Al)-derived porous carbons obtained high surface areas (304.7-1600 m2 g-1) and chloramphenicol adsorption capacities (148.3-261.5 mg g-1). Several factors such as hydrogen bonding, Yoshida hydrogen bonding, and π-π interaction, hydrophobic interaction possibly controlled adsorption mechanisms. The ANC800 could be reused four cycles along with high stability in structure. As a result, NH2-MIL-53(Al)-derived porous carbons are recommended as recyclable and efficient adsorbents to the treatment of antibiotics in water.

Impregnation of amine functionalized deep eutectic solvents in NH2-MIL-53(Al) MOF for CO2/N2 separation

To improve the CO2/N2 separation performance of metal-organic frameworks (MOFs), amine functionalized deep eutectic solvents (DESs) (choline chloride/ethanolamine (DES1), choline chloride/ethanolamine/diethanolamine (DES2), and choline chloride/ethanolamine/methyldiethanolamine (DES3)) confined in the NH2-MIL-53(Al). NH2-MIL-53(Al) impregnated with DES was synthesized and characterized using N2-sorption analysis and Fourier transform infrared (FTIR) spectroscopy. Morphology of the synthesized MOFs was investigated using scanning electron microscopy (SEM). Also, elemental analysis was determined by energy-dispersive X-ray spectroscopy (EDX). CO2 adsorption isotherms of amine-functionalized DESs impregnated NH2-MIL-53(Al) were measured at temperatures range of 288.15-308.15 K and pressures up to 5 bar. The results reveal that the impregnated MOF with functional group of amine DES improves separation performance NH2-MIL-53(Al). CO2 adsorption capacity of DES1/NH2-MILS-53(Al) was twofold respect to of pristine NH2-MIL-53(Al) at 5 bar and 298.15 K; which helps to guide the logical design of new mixtures for gas separation applications. Also, the heat of adsorption for the synthesized NH2-MIL-53(Al) and DESs/NH2-MIL-53(Al) were estimated. Most importantly, CO2 chemisorption by NH2 group in the sorbent structure has a significant effect on the adsorption mechanism.

Application of a novel hybrid MIL-53(Al)@rice husk for the adsorption of glyphosate in water: Characteristics and mechanism of the process

The development of new materials that have a high capacity to remove pollutants in water-based media is becoming increasingly important because of the serious contamination of water and the negative impact on biodiversity and public health. The presence of glyphosate in water, the most widely used herbicide worldwide, has triggered alerts owing to the collateral effects it may cause on human health. The main objective of the present study was to investigate the potential of the hybrid material MIL-53(Al)@RH for the adsorption of glyphosate in aqueous solution. The material was obtained following the methodology of MIL-53(Al) synthesis in the presence of hydrolyzed rice husk assisted by microwave. Batch adsorption experiments were carried out to evaluate the adsorbent dosage, pH₀ solution effect, contact time, adsorbate concentration, and temperature effect. The results demonstrated that a maximum adsorption capacity of 296.95 mg g^-1, at pH₀ 4 with a ratio of 0.04 g MIL-53(Al)@RH/50 mL of solution, was achieved in 30 min. The Avrami and pseudo-second order models appropriately described the adsorption kinetics and the equilibrium by Langmuir and Sips models. The enthalpy changes (ΔH°) determined propose an endothermic reaction governed by chemisorption, corroborating the kinetic and equilibrium settings. Hydrogen bonds, π*-π interactions, and complexation between the metal centers of MIL-53(Al) and the anionic groups of glyphosate were postulated to be involved as adsorption mechanisms. Finally, for practical application, MIL-53(Al)@RH was packed in a column for a fixed-bed test which revealed that the hybrid can remove glyphosate with an adsorption capacity of 76.304 mg L^-1, utilizing 90% of the bed.

Improving performance of mesoporous MOF AlTp impregnated with ionic liquids for CO2 adsorption

In this work, the CO₂ adsorption performance of metal-organic frameworks (MOFs) impregnated with ionic liquids (ILs) was studied using quartz crystal microbalance (QCM) at the temperature of 298.15 K and pressures up to 5 bar. The hybrid composites consist of aluminum terephthalate metal-organic framework (AlTp) impregnated of 1-butyl-4-methyl pyridinium and 1-butyl-3-methylimidazolium-based ionic liquids (ILs) with different anions, viz. tetrafluoroborate ([BF₄]^-), thiocyanate ([SCN]^-), chloride ([Cl]^-), and bromide ([Br]^-). ILs-impregnated AlTp synthesized was characterized using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), the thermogravimetry analysis (TGA) and Fourier transform infrared (FTIR) spectroscopy. CO₂ adsorption isotherms of the IL/AlTp composites and AlTp were measured to evaluate the ILs effect on the CO₂ adsorption of the AlTp. Comparison of CO₂ adsorption in ILs/AlTp with different anion ([Cl]^-, [Br]^-, [SCN]^-, [BF₄]^-) reveals that CO₂ adsorption in ILs/AlTp was increased in the order as: [BF₄]^- < [SCN]^- < [Br]^- < [Cl]^-. The results show that [BMPyr][Cl]/AlTp the highest CO₂ adsorption capacity, 2.6 times higher than that of AlTp at 5 bar and 298.15 K which helps to guide the logical design of new mixtures for gas separation applications. Also, adsorption/desorption test show that regeneration performance of [BMPyr][Cl]/AlTp is 96.53% after five consecutive cycles adsorption/desorption.

Fluorescence turn-off sensing strategy based on Al-based MOF for selective detection of tricresyl phosphate

Tricresyl phosphate (TCP), a notable emerging pollutant with a high bioconcentration factor and biotoxicity, is a typical representative of aryl-organophosphorus flame retardants. The electrochemical and chromatographic technologies used in conventional TCP detection have a variety of drawbacks. Hence, it is crucial to suggest an easy, accurate, and selective method for detecting TCP. In this study, we presented a brand-new method based on NH₂-MIL-53(Al) nanoprobe for the direct luminescence assay of TCP. NH₂-MIL-53(Al) possessed an excellent crystal structure and superior optical qualities. Notably, the introduction of TCP caused a considerable dampening of the photoluminescence signal of the nanoprobe. The fluorescence response based on static quenching was verified by fluorescence lifetime decay curves. The thermodynamic analysis further concluded that TCP and nanoprobe spontaneously produced non-fluorescent complexes due to hydrophobic interaction. The quenching efficiency (F₀-F)/F₀ of the nanoprobe and the TCP concentration displayed good linearity in the scope of 0.3-3.0 μM (R² = 0.996), and the LOD was 0.058 μM under the ideal detection conditions. More significantly, the technique was effectively used to identify TCP in lake and tap water (RSD ≤5.79%), which provided a fresh perspective on how to recognize OPFRs in environmental water.

A critical review on the synthesis of NH2-MIL-53(Al) based materials for detection and removal of hazardous pollutants

Nowadays, emerging hazardous pollutants have caused many harmful effects on the environment and human health, calling for the state of the art methods for detection, qualification, and treatment. Metal-organic frameworks are porous, flexible, and versatile materials with unique structural properties, which can solve such problems. In this work, we reviewed the synthesis, activation, and characterization, and potential applications of NH₂-MIL-53(Al). This material exhibited intriguing breathing effects, and obtained very high surface areas (182.3-1934 m²/g) with diverse morphologies. More importantly, NH₂-MIL-53(Al) based materials could be used for the detection and removal of various toxic pollutants such as organic dyes, pharmaceuticals, herbicides, insecticides, phenols, heavy metals, and fluorides. We shed light on plausible adsorption mechanisms such as hydrogen bonds, π-π stacking interactions, and electrostatic interactions onto NH₂-MIL-53(Al) adsorbents. Interestingly, NH₂-MIL-53(Al) based adsorbents could be recycled for many cycles with high stability. This review also recommended that NH₂-MIL-53(Al) based materials can be a good platform for the environmental remediation fields.

Environmental remediation through various composite membranes moieties: Performances and thermomechanical properties

Pollution harms ecosystems and poses a serious threat to human health around the world through direct or indirect effects on air, water, and land. The importance of remediating effluents is paramount to reducing environmental concerns. CO₂ emissions are removed efficiently and efficaciously with mixed matrix membranes (MMMs), which are viable replacements for less efficient and costly membranes. In the field of membrane technology, MMMs are advancing rapidly due to their good separation properties. The selection of filler to be incorporated in mixed matrix membranes is very considered very important. There has been considerable interest in MOFs, carbon nanotubes (CNTs), ionic liquids (ILs), carbon molecular sieves (CMSs), sulfonated fillers (SFs), and layered silicates (LSs) as inorganic fillers for improving the properties of mixed matrix membranes. These fillers promise superb results and long durability for mixed matrix membranes based on them. The purpose of this review is to review different fillers used in MMMs for improving separation properties, limitations, and thermomechanical properties for environmental control and remediation.

Application of MIL-53(Al)-NH2 as a Dispersive Microsolid-Phase Extraction Material for Determination of Cyclophosphamide in Urine by High-Performance Liquid Chromatography

In this paper, an aluminum-based metal-organic framework (MIL-53(Al)-NH₂) was synthesized and employed as a well-known and efficient dispersive microsolid-phase extraction (Dμ-SPE) sorbent for reliable determination of cyclophosphamide in urine samples by the high-performance liquid chromatography (HPLC) technique. The synthesized MIL-53(Al)-NH₂ was characterized by FT-IR, PXRD, FE-SEM, and EDS for more details. Then, the effective parameters of the preconcentration and extraction of urinary cyclophosphamide including the amount of the solid sorbent, the pH of the sample, sample volume, extraction and desorption time, and the type and volume of elution solvent were thoroughly investigated and optimized. According to the results, a linear dynamic range of 0.14-120 μg mL^-1 with a good correlation coefficient (R ² = 0.998) and a limit of detection (LOD) of 0.05 μg mL^-1 were obtained with intra- and interday relative standard deviations (n = 9) of 3.13 and 3.99% in optimized conditions, respectively. Furthermore, the absolute recovery of urinary cyclophosphamide at three concentrations (0.5, 50.0, and 100.0 μg mL^-1) was 94.0%. Finally, the optimal condition of the developed method was successfully applied to the extraction and analysis of cyclophosphamide from the real urine samples with satisfactory recovery (94.0-97.0%) and acceptable precision (<4.1%). The findings proved that MIL-53(Al)-NH₂ can be utilized as a suitable adsorbent for highly reliable extraction of cyclophosphamide in biological matrices.

An ultralow concentration of Al-MOFs for turn-on fluorescence detection of aflatoxin B1 in tea samples

A turn-on fluorescent sensing platform based on an ultralow concentration of Al-metal organic frameworks for the detection of aflatoxin B₁ has been developed for the first time. This fluorescence turn-on sensor exhibits the largest fluorescence enhancement (or quenching) constant value of 179404 M^-1 among all luminescence-based chemical sensors reported till date. Moreover, the sensor afforded a rapid detection of aflatoxin B₁, with a linear response in the concentration range of 0.05-9.61 μM and a low detection limit of 11.67 ppb. Additionally, the fabricated sensor showed good repeatability, reproducibility, stability, and selectivity. Most importantly, the practical application of this sensor has been demonstrated by detecting aflatoxin B₁ in complex tea samples with low relative standard deviation (≤7.72%; n = 3) and satisfactory recoveries. In summary, the proposed method has great potential as a simple, sensitive and selective strategy for monitoring aflatoxin B₁ in food samples.

Rational Process Design for Facile Fabrication of Dual Functional Hybrid Membrane of MOF and Electrospun Nanofiber towards High Removal Efficiency of PM2.5 and Toxic Gases

The application of nanofiber (NF) and porous metal-organic framework (MOF) has increasingly attracted attention for the proptection of public health. This composite platform provides the physical sieving of particulate matter (PMs) and capturing gases, serving as an outstanding filtering medium with lightweight and multifunctionality. Herein, process design and optimization were performed to produce a multifunctional membrane comprised NFs and MOF particles. Electrospinning/electrospray techniques were used to fabricate a hybrid membrane of poly(vinyl alcohol) NF and Fe-BTC as an adsorptive MOF on a macroporous nonwoven (NW). Three types of filters were prepared by varying the order of processing steps, i.e., MOF/NF/NW, MOF+NF/NW, and NF/MOF/NW, to elucidate the effect of the fabrication process in the filtration of air pollutant. The optimal filtration performance was achieved in MOF+NF/NW system: the highest filtration efficiency (97%) and outstanding gas capturing efficiencies (≈60% and ≈35% decreases from initial NH₃ and H₂ S concentrations, respectively). However, when air permeability and filtration efficiency are considered, the most desirable configuration for personal protection equipment (PPE) was NF/MOF/NW system, which effectively enabled comfortable breathing without compromising the lightweight and multifunctional performance. This article is protected by copyright. All rights reserved.

Synthesis of Al-Based Metal-Organic Framework in Water With Caffeic Acid Ligand and NaOH as Linker Sources With Highly Efficient Anticancer Treatment

In this study, novel nanostructures of aluminum base metal-organic framework (Al-MOF) samples were synthesized using a sustainable, non-toxic, and cost-effective green synthesis route. Satureja hortensis extract was used as an effective source of linker for the development of the Al-MOF structures. The Fourier-transformed infrared (FTIR) spectrum confirmed the presence of characterization bonds related to the Al-MOF nanostructures synthesized by the green synthesis route. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses revealed that the sample synthesized by Na2-CA was composed of multilayers, although it was agglomerated, but it had dispersed and occurred in spherical particles, indicating active organic matter. N2 adsorption/desorption isotherms demonstrated the significant porosity of the Al-MOF samples that facilitate the high potential of these nanostructures in medical applications. The anticancer treatment of Al-MOF samples was performed with different concentrations using the MTT standard method with untreated cancer cells for 24 and 48 h periods. The results exhibited the significant anticancer properties of Al-MOF samples developed in this study when compared with other MOF samples. Thus, the development of a novel Al-MOF and its application as a natural linker can influence the anticancer treatment of the samples. According to the results, the products developed in this study can be used in more applications such as biosensors, catalysts, and novel adsorbents.

Ternary metal oxide embedded carbon derived from metal organic frameworks for adsorption of methylene blue and acid red 73

Organic dyes can enter water bodies through industrial wastes and may pose a threat to the health of aquatic organisms and human. Metal organic framework derived carbon materials (CMOFs) have shown excellent performance for aqueous dye adsorption. However, few have studied multimetallic CMOFs for dye removal. Herein, a ternary metal oxide embedded carbon derived from amino-modified metal organic framework (CMOF(Fe/Al/Ni 8/7/5)-NH₂) has been developed as an efficient adsorbent to remove aqueous methylene blue (MB) and acid red 73 (AR-73). CMOF(Fe/Al/Ni 8/7/5)-NH₂ reached adsorption equilibrium for both MB and AR-73 within 30 min at neutral pH condition. It also achieved 18 and 24 times higher adsorption than commercial activated carbon (AC) in 10 min for MB and AR-73, respectively. Compared to other CMOFs-NH₂, CMOF(Fe/Al/Ni 8/7/5)-NH₂ had the highest adsorption capacity for both cationic MB and anionic AR-73. In addition, CMOF(Fe/Al/Ni 8/7/5)-NH₂ had < 0.15% metal leaching in 90 min in the pH range of 4-10, and it also maintained 89% and 95% adsorption capacity for MB and AR-73 in five consecutive adsorption batches, respectively. Electrostatic interaction was identified as the primary interaction between CMOFs-NH₂ and the dyes, and the embedded crystalline metal oxides with different points of zero charge (PZCs) were identified to be the key adsorption sites. A uniformly distributed surface charge model was proposed to explain the exceptional adsorption capacity of CMOF(Fe/Al/Ni 8/7/5)-NH_2. With fast kinetics, high adsorption capacity, wide applicability and good stability, CMOF(Fe/Al/Ni 8/7/5)-NH₂ may be an effective adsorbent for many other ionic organic pollutants.

Anodic electrosynthesis of MIL-53(Al)-N(CH2PO3H2)2 as a mesoporous catalyst for synthesis of novel (N-methyl-pyrrol)-pyrazolo[3,4-b]pyridines via a cooperative vinylogous anomeric based oxidation

In this paper, the MIL-53(Al)-NH2 metal-organic frameworks (MOFs) was prepared based on the anodic electrosynthesis under green conditions. The anodic electrosynthesis as an environmentally friendly procedure was performed in the aqueous solution, room temperature, atmospheric pressure, and in the short reaction time (30 min). Also, the employed procedure was accomplished without the need for the ex-situ salt and base/probase additives as cation source and ligand activating agent at the constant current mode (10.0 mA cm-2). The electrosynthesized MOFs was functionalized with phosphorus acid tags as a novel mesoporous catalyst. This mesoporous catalyst was successfully employed for synthesis of new series (N-methyl-pyrrol)-pyrazolo[3,4-b]pyridines by one-pot condensation reaction of 3-methyl-1-phenyl-1H-pyrazol-5-amine, 3-(1-methyl-1H-pyrrol-2-yl)-3-oxopropanenitrile and various aromatic aldehydes (mono, bis and tripodal). This catalyst proceeded the organic synthetic reaction via a cooperative vinylogous anomeric based oxidation mechanism with a marginal decreasing its catalytic activity after recycling and reusability.

Enhanced Fungicidal Efficacy by Co-Delivery of Azoxystrobin and Diniconazole with Cauliflower-Like Metal-Organic Frameworks NH2-Al-MIL-101

Long-term use of a single fungicide increases the resistance risk and causes adverse effects on natural ecosystems. Controlled release formulations of dual fungicides with different modes of action can afford a new dimension for addressing the current issues. Based on adjustable aperture and superhigh surface area, metal-organic frameworks (MOFs) are ideal candidates as pesticide release carriers. This study used Al3+ as the metal node and 2-aminoterephthalic acid as the organic chain to prepare aluminum-based metal-organic framework material (NH2-Al-MIL-101) with "cauliflower-like" structure and high surface area of 2359.0 m2/g. Fungicides of azoxystrobin (AZOX) and diniconazole (Dini) were simultaneously encapsulated into NH2-Al-MIL-101 with the loading content of 6.71% and 29.72%, respectively. Dual fungicide delivery system of AZOX@Dini@NH2-Al-MIL-101 demonstrated sustained and pH responsive release profiles. When the maximum cumulative release rate of AZOX and Dini both reached about 90%, the release time was 46 and 136 h, respectively. Furthermore, EC50 values as well as the percentage of inhibition revealed that AZOX@Dini@NH2-Al-MIL-101 had enhanced germicidal efficacy against rice sheath blight (Rhizoctonia solani), evidenced by the synergistic ratio of 1.83. The present study demonstrates a potential application prospect in sustainable plant protection through co-delivery fungicides with MOFs as a platform.

Recent Advances of Pervaporation Separation in DMF/H2O Solutions: A Review

N,N-dimethylformamide (DMF) is a commonly-used solvent in industry and pharmaceutics for extracting acetylene and fabricating polyacrylonitrile fibers. It is also a starting material for a variety of intermediates such as esters, pyrimidines or chlordimeforms. However, after being used, DMF can be form 5–25% spent liquors (mass fraction) that are difficult to recycle with distillation. From the point of view of energy-efficiency and environment-friendliness, an emergent separation technology, pervaporation, is broadly applied in separation of azeotropic mixtures and organic–organic mixtures, dehydration of aqueous–organic mixtures and removal of trace volatile organic compounds from aqueous solutions. Since the advances in membrane technologies to separate N,N-dimethylformamide solutions have been rarely reviewed before, hence this review mainly discusses the research progress about various membranes in separating N,N-dimethylformamide aqueous solutions. The current state of available membranes in industry and academia, and their potential advantages, limitations and applications are also reviewed.

Boosting Ammonia Uptake within Metal-Organic Frameworks by Anion Modulating Strategy

Ammonia with toxic and corrosive features needs advanced protective materials and removal tools, although it is a vital component in human food supply processes. So, to satisfy these requirements, materials with high adsorption capacity and affinity for ammonia should be developed. The present research has been focused on a series zinc-based metal-organic frameworks (MOF) containing mixed ligands, biphenyl dicarboxylic acid (BPDA) and tris(4-(4H-1,2,4-triazol-4-yl)phenyl)amine (TTPA), which are modulated by different anions including CH₃COO^-, CF₃COO^-, and CF₃SO₃^-. Ammonia uptake capacity was measured via static and dynamic conditions under 50% relative humidity. Among all compounds, CF₃SO₃^- anion could enhance the ammonia uptake capacity of MOFs up to 177.85 and 349 mg/g during static and breakthrough measurements, respectively, so that 83.30% of the total uptake capacity (at P/P_o = 1.0 and 298 K) was achieved at low relative pressure range (up to 0.1). The isosteric heats of ammonia adsorption on PFC-27 and derivatives were calculated in the range of 7.03-10.16 kJ mol^-1 so that they increased upon CF₃SO₃^-, CF₃COO^-, and CH₃COO^- ion incorporation. This is potentially beneficial for enhanced ammonia adsorption. Interestingly, adsorption capacities were retained with only slight changes after five cycles and three regeneration temperatures, 25 °C, 60 °C, and 120 °C, under vacuum. The special affinity for NH₃ adsorption and MOF phase stability after desorption is clearly proved by FTIR spectra and PXRD analysis, respectively. Generally, the results suggest that ion insertion modification is an efficient strategy for enhancement of MOF adsorption performance.

Sustainable functionalized metal-organic framework NH2-MIL-101(Al) for CO2 separation under cryogenic conditions

In this study, a sustainable NH₂-MIL-101(Al) is synthesized and subjected to characterization for cryogenic CO₂ adsorption, isotherms, and thermodynamic study. The morphology revealed a highly porous surface. The XRD showed that NH₂-MIL-101(Al) was crystalline. The NH₂-MIL-101(Al) decomposes at a temperature (>500 °C) indicating excellent thermal stability. The BET investigation revealed the specific surface area of 2530 m²/g and the pore volume of 1.32 cm³/g. The CO₂ adsorption capacity was found to be 9.55 wt% to 2.31 wt% within the investigated temperature range. The isotherms revealed the availability of adsorption sites with favorable adsorption at lower temperatures indicating the thermodynamically controlled process. The thermodynamics showed that the process is non-spontaneous, endothermic, with fewer disorders, chemisorption. Finally, the breakthrough time of NH₂-MIL-101(Al) is 31.25% more than spherical glass beads. The CO₂ captured by the particles was 2.29 kg m^-3. The CO₂ capture using glass packing was 121% less than NH₂-MIL-101(Al) under similar conditions of temperature and pressure.

Targeted perfusion adsorption for hyperphosphatemia using mixed matrix microspheres (MMMs) encapsulated NH2-MIL-101(Fe)

Hyperphosphatemia, a common complication of chronic renal failure patients, is described as an excess amount of serum phosphate >4.5 mg dL-1. Current therapy for hyperphosphatemia is limited by low removal efficiency, secondary hyperparathyroidism, uremic bone disease, and the promotion of vascular and visceral calcifications. Metal organic frameworks (MOFs) have aroused great interest in the field of blood purification because of their strong specific adsorption. Herein, we prepared mixed matrix microspheres (MMMs) encapsulated NH2-MIL-101(Fe) with specific adsorption to blood phosphate. Simultaneously, a heparinoid copolymer poly (acrylic acid-sodium 4-vinylbenzenssulfonate) (P(AA-SSNa)) was incorporated to improve the hemocompatibility. The proposed MMMs exhibited excellent phosphate adsorption capacity both in aqueous and human plasma environments. They also showed comprehensive hemocompatibility e.g. low tendency of protein adsorption, low hemolysis rate and extended blood coagulation time. In general, we envision that the MMMs are potentially suitable as highly efficient hemoperfusion adsorbents for hyperphosphatemia treatment.

Disulfide Cross-Linked Poly(Methacrylic Acid) Iron Oxide Nanoparticles for Efficiently Selective Adsorption of Pb(II) from Aqueous Solutions

The efficient selectivity of heavy metal ions from wastewater is still challenging but gains great public attention in water treatment on a world scale. In this study, the novel disulfide cross-linked poly(methacrylic acid) iron oxide (Fe3O4@S-S/PMAA) nanoparticles with selective adsorption, improved adsorption capability, and economic reusability were designed and prepared for selective adsorption of Pb(II) ions in aqueous solution. In this study, nuclear magnetic resonance, dynamic light scattering, scanning electron microscopy, X-ray diffraction, vibrating sample magnetometry, and thermogravimetric analysis were utilized to study the chemophysical properties of Fe3O4@S-S/PMAA. The effect of different factors on adsorption properties of the Fe3O4@S-S/PMAA nanoparticles for Co(II) and Pb(II) ions in aqueous solution was explored by batch adsorption experiments. For adsorption mechanism investigation, the adsorption of Fe3O4@S-S/PMAA for Co(II) and Pb(II) ions can be better fitted by a pseudo-second-order model, and the adsorption process of Fe3O4@S-S/PMAA for Co(II) and Pb(II) matches well with the Freundlich isotherm equation. Notably, in the adsorption experiments, the Fe3O4@S-S/PMAA nanoparticles were demonstrated to have a maximum adsorption capacity of 48.7 mg·g-1 on Pb(II) ions with a selective adsorption order of Pb2+ > Co2+ > Cd2+ > Ni2+ > Cu2+ > Zn2+ > K+ > Na+ > Mg2+ > Ca2+ in the selective experiments. In the regeneration experiments, the Fe3O4@S-S/PMAA nanoparticles could be easily recovered by desorbing heavy metal ions from the adsorbents with eluents and showed good adsorption capacity for Co(II) and Pb(II) after eight recycles. In brief, compared to other traditional nanoadsorbents, the as-prepared Fe3O4@S-S/PMAA with improved adsorption capability and high regeneration efficiency demonstrated remarkable affinity for adsorption of Pb(II) ions, which will provide a novel technical platform for selective removal of heavy metal ions from actual polluted water.

Aluminum-based metal-organic frameworks for adsorptive removal of anti-cancer (methotrexate) drug from aqueous solutions

A series of metal-organic frameworks (MOFs) based on aluminum-benzene dicarboxylates (MIL-53, NH₂-MIL-53, and NH₂-MIL-101) at different ratios have been synthesized, and their adsorption performances for methotrexate (MTX), an anti-cancer drug, have been investigated in terms of adsorption kinetics, isotherms, solution pH, thermodynamics, mechanism, and recyclability. Maximum adsorption values of 374.97, 387.82, and 457.69 mg/g were observed for MIL-53, NH₂-MIL-53, and NH₂-MIL-101 , respectively. Our study shows that adsorption capacity of MTX depends not only on surface area and pore volume but also on the zeta potential and the presence of suitable functional groups. Higher adsorption of NH₂-MIL-101 observed for MTX than the other synthesized MOFs may be attributed to its large surface area, large total pore volume, high positive zeta potential, and polar amino functional groups located on its surface, which are responsible for its increased interactions with MTX molecules. Adsorption isotherms and kinetics of MTX onto NH₂-MIL-101 followed the Langmuir and pseudo-second-order kinetic equations. Thermodynamic data suggest that adsorption of MTX onto NH₂-MIL-101 is spontaneous and exothermic, while the adsorption mechanism is governed by electrostatic interactions, π-π stacking interactions, and H-bonding. Regeneration and recyclability of NH₂-MIL-101 were also investigated by washing with ethanol to observe its decreased adsorption performance towards MTX. It was slightly decreased after seven adsorption-desorption cycles, indicating excellent regeneration and good structural stability under the chosen experimental conditions.

Adsorption of dicamba and MCPA onto MIL-53(Al) metal-organic framework: response surface methodology and artificial neural network model studies

An aluminium-based metal–organic framework ((MOF), MIL-53(Al)), was hydrothermally synthesized, characterized and applied for the remediation of the herbicides dicamba (3,6-dichloro-2-methoxy benzoic acid) and 4-chloro-2-methylphenoxyacetic acid (MCPA) in aqueous medium. Response surface methodology (RSM) and artificial neural network (ANN) were used to design, optimize and predict the non-linear relationships between the independent and dependent variables. The shared interaction of the effects of key response parameters on the adsorption capacity were assessed using the central composite design-RSM and ANN optimization models. The optimum adsorption capacities for dicamba and MCPA are 228.5 and 231.9 mg g⁻¹, respectively. The RSM ANOVA results showed significant p-values, with coefficients of determination (R²) = 0.988 and 0.987 and R² adjusted = 0.974 and 0.976 for dicamba and MCPA, respectively. The ANN prediction model gave R² = 0.999 and 0.999, R² adjusted = 0.997 and 0.995 and root mean square errors (RMSEs) of 0.001 and 0.004 for dicamba and MCPA, respectively. In each set of experimental conditions used for the study, the ANN gave better prediction than the RSM, with high accuracy and minimal error. The rapid removal (∼25 min), reusability (5 times) and good agreement between the experimental findings and simulation results suggest the great potential of MIL-53(Al) for the remediation of dicamba and MCPA from water matrices.

Rapid equilibration within a short time, high adsorption capacity, optimization, multivariate interaction of adsorption parameters and artificial neural network prediction model.

MOFs-derived conductive structure for high-performance removal/release of phosphate as electrode material

Porous metal-organic frameworks (MOFs) have drawn increasing attention as promising phosphate adsorbents. Yet the potential agglomeration of MOFs particles and the difficult collection process largely thwarted their application. Meanwhile, adsorbents regeneration might destroy MOFs structures due to the use of strong alkaline solution. In this work, we reported a strategy for designing and fabricating an electrode to remove phosphate based on MIL-101 derived metal/carbon via a two-step carbonization step, which not only introduced C doping but also created a stable structure. With the assistance of electric field, the migration and capture of phosphate anions were greatly enhanced. Under 1 V condition, the material exhibited a high maximum removal capacity of 97.73 mg P/g. Adsorption kinetics and parameters for phosphate at different conditions were analyzed. Langmuir and Freundlich isotherms were employed to validate the adsorption data. More importantly, the regeneration of electrode was achieved in a more facile and efficient way than micro/ nanoparticles adsorbents by simple voltage control. Such an intriguing approach may provide a new platform to further expand the use of MOFs for adsorption process.

Construction of an Aminated MIL-53(Al)-Functionalized Carbon Nanotube for the Efficient Removal of Bisphenol AF and Metribuzin

A versatile organic-inorganic hybrid structure makes a metal-organic framework (MOF) an outstanding host for different kinds of guests; in addition, its easy pyrolysis nature has been proven to be useful as precursors in the construction of carbon-based materials with a special porous structure. Herein, a novel porous composite nanostructure of an aminated MIL-53(Al)@carbon nanotube (CNT) has been successfully constructed for the first time based on in situ synthesis combining the pyrolysis of ZIF-67. The resulting composite nanostructure was performed by the means of scanning electron microscopy, Brunauer-Emmett-Teller analysis, typical and high-resolution transmission electronic microscopy, X-ray photoelectron spectroscopy, etc. The results showed that a compact heterostructure has been formed between an aminated MIL-53(Al) and a CNT. The resulting composites, named N-MIL@CNT, represent distinct promoted activities in the removal of Bisphenol AF (BPAF) and Metribuzin from wastewater, and the maximum adsorption values were 274 mg/g (BPAF) and 213 mg/g (Metribuzin), which are larger than the results obtained by other MOF-based nanomaterials. The adsorption isotherm, kinetics, and thermodynamics were studied in detail, and the selective adsorption mechanism was also suggested. The excellent selectivity, reusability, and structure stability suggest the potential application of this composite nanostructure in the selective removal of BPAF or Metribuzin from the practical wastewater.

Tuning of Nano-Based Materials for Embedding Into Low-Permeability Polyimides for a Featured Gas Separation

Several concepts of membranes have emerged, aiming at the enhancement of separation performance, as well as some other physicochemical properties, of the existing membrane materials. One of these concepts is the well-known mixed matrix membranes (MMMs), which combine the features of inorganic (e.g., zeolites, metal–organic frameworks, graphene, and carbon-based materials) and polymeric (e.g., polyimides, polymers of intrinsic microporosity, polysulfone, and cellulose acetate) materials. To date, it is likely that such a concept has been widely explored and developed toward low-permeability polyimides for gas separation, such as oxydianiline (ODA), tetracarboxylic dianhydride–diaminophenylindane (BTDA-DAPI), m-phenylenediamine (m-PDA), and hydroxybenzoic acid (HBA). When dealing with the gas separation performance of polyimide-based MMMs, these membranes tend to display some deficiency according to the poor polyimide–filler compatibility, which has promoted the tuning of chemical properties of those filling materials. This approach has indeed enhanced the polymer–filler interfaces, providing synergic MMMs with superior gas separation performance. Herein, the goal of this review paper is to give a critical overview of the current insights in fabricating MMMs based on chemically modified filling nanomaterials and low-permeability polyimides for selective gas separation. Special interest has been paid to the chemical modification protocols of the fillers (including good filler dispersion) and thus the relevant experimental results provoked by such approaches. Moreover, some principles, as well as the main drawbacks, occurring during the MMM preparation are also given.

High-Performance CO2-Selective Hybrid Membranes by Exploiting MOF-Breathing Effects

Conventional CO₂ separation in the petrochemical industry via cryogenic distillation or amine-based absorber-stripper units is energy-intensive and environmentally unfriendly. Membrane-based gas separation technology, in contrast, has contributed significantly to the development of energy-efficient systems for processes such as natural gas purification. The implementation of commercial polymeric membranes in gas separation processes is restricted by their permeability-selectivity trade-off and by their insufficient thermal and chemical stability. Herein, we present the fabrication of a Matrimid-based membrane loaded with a breathing metal-organic framework (MOF) (NH₂-MIL-53(Al)) which is capable of separating binary CO₂/CH₄ gas mixtures with high selectivities without sacrificing much of its CO₂ permeabilities. NH₂-MIL-53(Al) crystals were embedded in a polyimide (PI) matrix, and the mixed-matrix membranes (MMMs) were treated at elevated temperatures (up to 350 °C) in air to trigger PI cross-linking and to create PI-MOF bonds at the interface to effectively seal the grain boundary. Most importantly, the MOF transitions from its narrow-pore form to its large-pore form during this treatment, which allows the PI chains to partly penetrate the pores and cross-link with the amino functions at the pore mouth of the NH₂-MIL-53(Al) and stabilizes the open-pore form of NH₂-MIL-53(Al). This cross-linked MMM, with MOF pore entrances was made more selective by the anchored PI-chains and achieves outstanding CO₂/CH₄ selectivities. This approach provides significant advancement toward the design of selective MMMs with enhanced thermal and chemical stabilities which could also be applicable for other potential applications, such as separation of hydrocarbons (olefin/paraffin or isomers), pervaporation, and solvent-resistant nanofiltration.

Impacts of Metal-Organic Frameworks on Structure and Performance of Polyamide Thin-Film Nanocomposite Membranes

Metal-organic frameworks (MOFs), a class of hybrid organic-inorganic materials, have recently attracted tremendous interests in the fabrication of thin-film nanocomposite (TFN) membranes with exceptional permselectivity. However, the structure-performance relationship of such membranes, which is a function of both MOF type and membrane fabrication procedure, has not been elucidated in the literature. In this study, three types of hydro-stable MOFs, namely, MIL-53(Al), NH₂-UiO-66, and ZIF-8, were used to fabricate TFN nanofiltration membranes via both blending (BL) and preloading interfacial polymerization methods. Results show that the incorporation of MOFs could enhance water permeability of TFN membranes to 7.2 L/(m²·h·bar) at most ( TFN_NH2-UiO-66-BL-0.10%), about 1.3 times of the corresponding thin-film composite membranes, without sacrificing their selectivity to reject NaCl (>40%) and xylose (>65%). Membrane characterization revealed that MOFs decreased the cross-linking degree while increasing the membrane thickness, surface negative charge, and roughness of the polyamide active layer. MIL-53(Al) were found to bind with polyamide via reacting with piperazine, whereas weaker polyamide-MOF interactions were observed for NH₂-UiO-66 and ZIF-8. This difference, along with the hydrophilicity of MOF particles, explained the varied permselectivity of different TFN membranes. Compared to pristine polyamide membranes, the TFN membranes demonstrated higher or comparable efficiencies in removing a set of six pharmaceuticals (PhACs), which were determined by the molecular properties of PhACs and membrane structure. The findings of this study deepen our understanding of the roles that MOFs play in regulating membrane performance, promoting molecular design of MOF-incorporated TFN membranes via precise control of MOF-polymer interactions.