High efficiency removal and recovery of an endocrine disrupting compound–bisphenol AF from wastewaters

Combining computational tools and experimental studies towards endocrine disruptors mitigation: A review of biocatalytic and adsorptive processes

The endocrine disruptors (EDCs) are an important group of emerging contaminants, and their mitigation has been a huge challenge due to their chemistry complexity and variety of these compounds. The traditional treatments are inefficient to completely remove EDCs, and adsorptive processes are the major alternative investigated on their removal. Also, the use of EDCs degrading enzymes has been encouraged due to ecofriendly approach of biocatalytic processes. This paper highlights the occurrence, classification, and toxicity of EDCs with special focus in the use of enzyme-based and adsorptive technologies in the elimination of EDCs from ambiental matrices. Numerous prior reviews have focused on the discussions toward these technologies. However, the literature lacks theoretical discussions about important aspects of these methods such as the mechanisms of EDCs adsorption on the adsorbent surface or the interactions between degrading enzymes - EDCs. In this sense, theoretical calculations combined to experimental studies may help in the development of more efficient technologies to EDCs mitigation. In this review, we point out how computational tools such as molecular docking and molecular dynamics have to contribute to the design of new adsorbents and efficient catalytic processes towards endocrine disruptors mitigation.

Carboxyl functionalized sorbent based solid-phase extraction for sensitive determination of endocrine disrupting chemicals in bottled water, juice and milk

Endocrine disrupting chemicals (EDCs) pose a serious threat to human health even at extremely low concentration. Three carboxyl functionalized porous polymers (PDA-DPBP, PTCDA-DPBP and ODPA-DPBP) were synthesized for the first time and employed as solid-phase extraction sorbent to enrich phenolic EDCs at trace level. Compared with PTCDA-DPBP, ODPA-DPBP and corresponding carboxyl-free counterpart (PC-DPBP), PDA-DPBP delivered superior enrichment efficiency for the phenolic EDCs, which can be ascribed to the strong hydrogen bonding, pore filling, hydrophobic interaction and π-π interaction between PDA-DPBP and phenolic EDCs. Coupled with high performance liquid chromatography, phenolic EDC residues in bottled water, juice and milk samples were enriched and determined. At the optimum conditions, the PDA-DPBP based method provided a good linear response in the range of 0.04-100ng mL-1 for bottled water, 0.07-100ng mL-1 for juice and 0.15-500ng mL-1 for milk samples. The detection limits (S/N=3) were 0.01-0.04, 0.02-0.06 and 0.05-0.10ng mL-1 for bottled water, juice and milk, respectively. The method recoveries were in the range from 81.6% to 116%, with RSDs ≤ 7.7%. This work provides an attractive and reliable alternative method for sensitive determination of phenolic EDCs.

Adsorption behavior of bisphenol A on bentonite-loess mixtures

The leakage of chemical compounds in landfill leachate led to serious environment pollution, especially, the compounds termed endocrine disruptors such as bisphenol A (BPA). It is very important to study the adsorption behavior of endocrine disruptors in modified soil for predicting and evaluating the potential harm of endocrine disruptors to the soil. Bentonite-amended Chinese loess mixtures, with various proportions of bentonite, were used for the removal of BPA from an aqueous solution. A batch test was used to investigate the adsorption properties of bisphenol A on bentonite and Chinese loess mixtures. The influences of bentonite proportion, temperature, reaction time, pH, and soil-water ratios on the adsorption process were considered. The Fourier transform infrared spectra (FTIR) was used to clarify the change of functional groups before and after the adsorption of BPA on soil. The adsorption mechanism of BPA on soil was discussed preliminary. The results show that the addition of bentonite to the loess can improve the adsorption rate of BPA. The adsorption of BPA was mainly a spontaneous, exothermic, entropy decreasing physical adsorption process. The interaction between bentonite content and reaction concentration had a beneficial effect on BPA adsorption. The linear relationship between bentonite content and adsorption capacity was obtained. The results indicate that bentonite amended loess can provide a good liner for BPA.

Adsorption removal of ibuprofen and naproxen from aqueous solution with Cu-doped Mil-101(Fe)

Due to the excellent anti-inflammatory effect, ibuprofen and naproxen have been widely used in the people's daily life, which inevitably leads to their pollution in natural water environment. The removal of these chemicals from water has drawn great interests. Here, a new Cu-doped Mil-101(Fe) was synthesized through a one-step solvothermal method and successfully applied for the adsorption removal of ibuprofen and naproxen from water. A series of characterization techniques (FESEM, TEM, N₂ adsorption-desorption analysis, XRD and FT-IR) were applied to explore the physicochemical properties of the prepared Cu-doped Mil-101(Fe). The adsorption performances of the Cu-doped Mil-101(Fe) for ibuprofen and naproxen, including the adsorption kinetics and isotherms, and effects of diverse influencing factors (pH, ionic strength, and natural organic matter) were examined through batch experiments. The adsorption kinetics and isotherms of ibuprofen and naproxen on the Cu-doped Mil-101(Fe) fitted well with the pseudo-second-order model and Langmuir model, respectively. The maximum adsorption capacities of Cu-doped Mil-101(Fe) were 497.3 and 396.5 mg/g for ibuprofen and naproxen, respectively. The pH of solution in a range of 3-9 exerted no significant effects on the adsorption process. The adsorption was almost unaffected by the ionic strength and humic acid. The π-π interaction and hydrogen bond interaction between the adsorbent and adsorbates were found to be accountable for adsorption. The Cu-doped Mil-101(Fe) was readily regenerated by ethanol and could be repeatedly used.

Bisfenol A adsorption using a low-cost adsorbent prepared from residues of babassu coconut peels

Nowadays, the occurrence of microcontaminants in water resources has become a worldwide concern. Among them, it can be mentioned Bisphenol A, a substance widely used in the chemical composition of plastic such as manufacture of packages, bottles, toiletries, among others. Its use may cause adverse effects on human health and the environment. Thus, a treatment is necessary to remove this compound and adsorption is an interesting alternative due to its low cost, operation and high efficiency. The objective of the present study was to evaluate the adsorption capacity of bisphenol in babassu activated carbon. The obtained results were satisfactory and the best experimental conditions were at 318 K temperature, 1 g L^-1 adsorbent concentration and 720 min equilibrium time, resulting in the maximum adsorptive capacity of 49.61 mg g^-1. The experimental data fit best with the pseudo-second order and Langmuir models for the kinetic and equilibrium studies, respectively. Thermodynamic parameters indicated endothermic, spontaneous and reversible process. The main adsorption mechanisms were hydrogen bonds and π-π interactions. In addition, the material regeneration study allowed to verify its possibility of reuse. Therefore, it was noticed that babassu activated carbon has high potential applicability in the treatment of contaminated water.

Endocrine-Disrupting Compounds: An Overview on Their Occurrence in the Aquatic Environment and Human Exposure

Endocrine-disrupting compounds (EDCs) as emerging contaminants have accumulated in the aquatic environment at concentration levels that have been determined to be significant to humans and animals. Several compounds belong to this family, from natural substances (hormones such as estrone, 17-estradiol, and estriol) to synthetic chemicals, especially pesticides, pharmaceuticals, and plastic-derived compounds (phthalates, bisphenol A). In this review, we discuss recent works regarding EDC occurrence in the aquatic compartment, strengths and limitations of current analytical methods used for their detection, treatment technologies for their removal from water, and the health issues that they can trigger in humans. Nowadays, many EDCs have been identified in significant amounts in different water matrices including drinking water, thus increasing the possibility of entering the food chain. Several studies correlate human exposure to high concentrations of EDCs with serious effects such as infertility, thyroid dysfunction, early puberty, endometriosis, diabetes, and obesity. Although our intention is not to explain all disorders related to EDCs exposure, this review aims to guide future research towards a deeper knowledge of EDCs’ contamination and accumulation in water, highlighting their toxicity and exposure risks to humans.

Construction of an Aminated MIL-53(Al)-Functionalized Carbon Nanotube for the Efficient Removal of Bisphenol AF and Metribuzin

A versatile organic-inorganic hybrid structure makes a metal-organic framework (MOF) an outstanding host for different kinds of guests; in addition, its easy pyrolysis nature has been proven to be useful as precursors in the construction of carbon-based materials with a special porous structure. Herein, a novel porous composite nanostructure of an aminated MIL-53(Al)@carbon nanotube (CNT) has been successfully constructed for the first time based on in situ synthesis combining the pyrolysis of ZIF-67. The resulting composite nanostructure was performed by the means of scanning electron microscopy, Brunauer-Emmett-Teller analysis, typical and high-resolution transmission electronic microscopy, X-ray photoelectron spectroscopy, etc. The results showed that a compact heterostructure has been formed between an aminated MIL-53(Al) and a CNT. The resulting composites, named N-MIL@CNT, represent distinct promoted activities in the removal of Bisphenol AF (BPAF) and Metribuzin from wastewater, and the maximum adsorption values were 274 mg/g (BPAF) and 213 mg/g (Metribuzin), which are larger than the results obtained by other MOF-based nanomaterials. The adsorption isotherm, kinetics, and thermodynamics were studied in detail, and the selective adsorption mechanism was also suggested. The excellent selectivity, reusability, and structure stability suggest the potential application of this composite nanostructure in the selective removal of BPAF or Metribuzin from the practical wastewater.

Effective removal of bisphenols from aqueous solution with magnetic hierarchical rattle-like Co/Ni-based LDH

A novel unique adsorbent (Fe₃O₄@Co/Ni-LDH) has been successfully synthesized and applied for removal of bisphenols (BPs) from aqueous solution. The prepared adsorbent was characterized to appear in a hierarchical rattle-like structure, and possesses high specific surface area, abundant pore system, and magnetic properties. Adsorption kinetics fitted well with the pseudo-second-order model. Adsorption isotherms abide by the Langmuir model, and the maximum adsorption capacity for bisphenol A (BPA), F (BPF), AF (BPAF) and S (BPS) on Fe₃O₄@Co/Ni-LDH at pH of 7.0 were 238.96, 177.09, 320.56 and 345.84 mg/g, respectively. Moreover, it was found that the high pH and NaCl concentration were not conducive to the removal of BPs. The humic acid and real waters had no significant effects on the removal of BPs on Fe₃O₄@Co/Ni-LDH. Furthermore, the FT-IR spectra indicated that the removal of four BPs were primarily Hydrogen bond interaction between BPs and Fe₃O₄@Co/Ni-LDH. The Fe₃O₄@Co/Ni-LDH was regenerated effectively by methanol and can be repeatedly used. This novel Fe₃O₄@Co/Ni-LDH can be applied as a promising adsorbent for removal of BPs from aqueous matrices.

Occurrence, fate and risk assessment of BPA and its substituents in wastewater treatment plant: A review

Several bisphenol analogues (BPs) are gradually replacing bisphenol A (BPA) in many fields, following strict restrictions on the production and use of BPA. The presence of micropollutants in wastewater treatment plants (WWTPs) may pose risks to the aquatic ecosystem and human health. In this review, we outlined the occurrence and fate of BPs in WWTPs, and estimated their potential risks to the aquatic ecosystem. BPA is still the most predominant bisphenol analogue in WWTPs with high detection rate and concentration, followed by bisphenol S (BPS) and F (BPF). Biodegradation and adsorption are the main removal pathways for removal of BPs in WWTPs. The secondary (activated sludge process, biological aerated filter, and membrane bioreactor) and advanced (membrane technique, ultraviolet disinfection, adsorption process, and ozonation) treatment processes show high removal efficiency for BPs, which are influenced by many factors such as sludge retention time and redox conditions. BPs other than BPA (assessed in this review) in effluent of WWTPs have low risks to Daphnia magna and early life stages on medaka, while BPA shows a medium or high risk under certain conditions. Knowledge gaps have been identified and future line of research on this class of chemicals in WWTPs is recommended. More data are needed to illustrate the occurrence and fate of BPs in WWTPs. Environmental risks of BPs other than BPA initiating from wastewater discharge to aquatic organisms remain largely unknown.

Enhanced Adsorption of Bisphenol A from Aqueous Solution with 2-Vinylpyridine Functionalized Magnetic Nanoparticles

In this study, a novel 2-vinylpyridine functionalized magnetic nanoparticle (Mag-PVP) was successfully prepared. The prepared Mag-PVP was characterized by transmission electronic microscopy (TEM), Fourier transform infrared spectrophotometry (FT-IR), vibrating sample magnetometry (VSM) and thermogravimetric analysis (TGA), and was used for the adsorption of bisphenol A (BPA) from aqueous solutions. Mag-PVP, which is composed of Fe₃O₄ nanoparticles and poly divinylbenzene-2-vinylpyridine (with a thickness of 10 nm), exhibited magnetic properties (M_s = 44.6 emu/g) and thermal stability. The maximum adsorption capacity (Q_m) of Mag-PVP for BPA obtained from the Langmuir isotherm was 115.87 mg/g at 20 °C, which was more than that of Fe₃O₄ nanospheres. In the presence of NaCl, the improved adsorption capacity of Mag-PVP was probably attributed to the screening effect of Mag-PVP surface charge and salting-out effect. In the presence of CaCl₂ and humic acid (HA), the adsorption capacity of BPA decreased due to competitive adsorption. The adsorption of BPA by Mag-PVP increased slightly with the increase in pH from 3.0 to 5.0 and obtained the largest adsorption amount at pH 5.0, which was probably attributed to hydrogen bonding interactions. Moreover, in actual water, Mag-PVP still showed excellent adsorption performance in removing BPA. The high adsorption capacity and excellent reusability performance in this work indicated that Mag-PVP was an effective adsorbent for removing BPA from aqueous solutions.

Comparison of chemical, ultrasonic and thermal regeneration of carbon nanotubes for acetaminophen, ibuprofen, and triclosan adsorption

Recovering the adsorption capacity of multi-walled carbon nanotubes (MWCNT) is of importance to the sustainable use of MWCNT for the adsorption of pharmaceuticals and personal care products (PPCP).

Controllable preparation of core–shell magnetic covalent-organic framework nanospheres for efficient adsorption and removal of bisphenols in aqueous solution

A monomer-mediated in situ growth strategy has been developed for the controllable fabrication of magnetic COF core–shell nanostructures with great potential for wide applications.

Removal of bisphenol A and some heavy metal ions by polydivinylbenzene magnetic latex particles

In this study, magnetic polydivinylbenzene latex particles MPDVB with a core-shell structure were tested for the removal of bisphenol A (BPA), copper Cu(II), lead Pb(II), and zinc Zn(II) from aqueous solutions by a batch-adsorption technique. The effect of different parameters, such as initial concentration of pollutant, contact time, adsorbent dose, and initial pH solution on the adsorption of the different adsorbates considered was investigated. The adsorption of BPA, Cu(II), Pb(II), and Zn(II) was found to be fast, and the equilibrium was achieved within 30 min. The pH 5-5.5 was found to be the most suitable pH for metal removal. The presence of electrolytes and their increasing concentration reduced the metal adsorption capacity of the adsorbent. Whereas, the optimal pH for BPA adsorption was found 7, both hydrogen bonds and π-π interaction were thought responsible for the adsorption of BPA on MPDVB. The adsorption kinetics of BPA, Cu(II), Pb(II), and Zn(II) were found to follow a pseudo-second-order kinetic model. Equilibrium data for BPA, Cu(II), Pb(II), and Zn(II) adsorption were fitted well by the Langmuir isotherm model. Furthermore, the desorption and regeneration studies have proven that MPDVB can be employed repeatedly without impacting its adsorption capacity.

Water-compatible imprinted pills for sensitive determination of cannabinoids in urine and oral fluid

A novel molecularly imprinted solid phase extraction (MISPE) methodology followed by liquid chromatography tandem mass spectrometry (LC-MS/MS) has been developed using cylindrical shaped molecularly imprinted pills for detection of Δ(9)-tetrahydrocannabinol (THC), 11-nor-Δ(9)-tetrahydrocannabinol carboxylic acid (THC-COOH), cannabinol (CBN) and cannabidiol (CBD) in urine and oral fluid (OF). The composition of the molecular imprinted polymer (MIP) was optimized based on the screening results of a non-imprinted polymer library (NIP-library). Thus, acrylamide as functional monomer and ethylene glycol dimethacrylate as cross-linker were selected for the preparation of the MIP, using catechin as a mimic template. MISPE pills were incubated with 0.5 mL urine or OF sample for adsorption of analytes. For desorption, the pills were transferred to a vial with 2 mL of methanol:acetic acid (4:1) and sonicated for 15 min. The elution solvent was evaporated and reconstituted in methanol:formic acid (0.1%) 50:50 to inject in LC-MS/MS. The developed method was linear over the range from 1 to 500 ng mL(-1) in urine and from 0.75 to 500 ng mL(-1) in OF for all four analytes. Intra- and inter-day imprecision were <15%. Extraction recovery was 50-111%, process efficiency 15.4-54.5% and matrix effect ranged from -78.0 to -6.1%. Finally, the optimized and validated method was applied to 4 urine and 5 OF specimens. This is the first method for the determination of THC, THC-COOH, CBN and CBD in urine and OF using MISPE technology.

Synthesis Mechanism and Thermal Optimization of an Economical Mesoporous Material Using Silica: Implications for the Effective Removal or Delivery of Ibuprofen

Mesoporous silica materials (MSMs) were synthesized economically using silica (SiO2) as a precursor via a modified alkaline fusion method. The MSM prepared at 500°C (MSM-500) had the highest surface area, pore size, and volume, and the results of isotherms and the kinetics of ibuprofen (IBP) removal indicated that MSM-500 had the highest sorption capacity and fastest removal speed vs. SBA-15 and zeolite. Compared with commercial granular activated carbon (GAC), MSM-500 had a ~100 times higher sorption rate at neutral pH. IBP uptake by MSM-500 was thermodynamically favorable at room temperature, which was interpreted as indicating relatively weak bonding because the entropy (∆adsS, -0.07 J mol(-1) K(-1)) was much smaller. Five times recycling tests revealed that MSM-500 had 83-87% recovery efficiencies and slower uptake speeds due to slight deformation of the outer pore structure. In the IBP delivery test, MSM-500 drug loading was 41%, higher than the reported value of SBA-15 (31%). The in vitro release of IBP was faster, almost 100%, reaching equilibrium within a few hours, indicating its effective loading and unloading characteristics. A cost analysis study revealed that the MSM was ~10-70 times cheaper than any other mesoporous silica material for the removal or delivery of IBP.