Color removal of melanoidin-rich industrial effluent by natural manganese oxides

Anaerobic recalcitrance in wastewater treatment: A review

Anaerobic treatment is applied as an alternative to traditional aerobic treatment for recalcitrant compound degradation. This review highlighted the recalcitrant compounds in wastewaters and their pathways under aerobic and anaerobic conditions. Forty-one recalcitrant compounds commonly found in wastewater along with associated anaerobic removal performance were summarized from current research. Anaerobic degradability of wastewater could not be appropriately evaluated by BOD/COD ratio, which should only be suitable for determining aerobic degradability. Recalcitrant wastewaters with a low BOD/COD ratio may be handled by anaerobic treatments after the adaption and provision of sufficient electron donors. Novel indicator characterizing the anaerobic recalcitrance of wastewater is called for, essential for emergent needs to resource recovery from high-strength recalcitrant wastewater for fulfilling appeals of circular bioeconomy of modern societies.

Detection and identification of hazardous organic pollutants from distillery wastewater by GC-MS analysis and its phytotoxicity and genotoxicity evaluation by using Allium cepa and Cicer arietinum L

Distillery industry generates a huge amount of wastewater, which contains a high strength of organic and inorganic load. Accordingly, this study aims to analyze the physico-chemical pollution parameters and the occurrence of phytotoxic, cytotoxic and genotoxic pollutants in wastewater. The result revealed that values of wastewater parameters were recorded as 13268 mg l^-1 (BOD), 25144 mg l^-1 (COD), 25144 mg l^-1 (TS), and 6634 mg l^-1 (phosphate), while pH was alkaline. The organic compounds detected by GC-MS were quercetin 7,3',4'-trimethoxy, octadecadienoic acid, propanoic acid, glycocholic acid methyl ester, cantaxanthin, etc. The Allium cepa was used for the toxicity test with different concentrations of wastewater showed a significant level of reduction in root growth and length after exposure and the maximum reduction was at 25% and 20%. Phytotoxicity studies were performed using Cicer arietinum L. with different concentrations of wastewater, which showed adverse effects on seed germination, root length, and the effect was associated with the increasing concentration of wastewater. A. cepa root tips were used for the analysis of mitotic index (MI), nuclear abnormalities (NA), and chromosomal aberrations (CA). MI was decreasing significantly from 72% (control) to 33%, 22%, 23%, 21%, and 18% at 5%, 10%, 15%, 20%, and 25% wastewater concentration, respectively. The A. cepa root tip cells showed chromosomal aberrations and nuclear abnormalities like vagrant, stickiness, chromosomal loss, c-mitosis, binucleated, micronuclei, and aberrant cell. This study concluded that the wastewater treatment process is insufficient and the discharged waste needs a proper assessment to know the associated health risk.

Detection and characterization of refractory organic and inorganic pollutants discharged in biomethanated distillery effluent and their phytotoxicity, cytotoxicity, and genotoxicity assessment using Phaseolus aureus L. and Allium cepa L

The color effluent discharged by alcohol distilleries comprises very high pollution loads due to the plethora of refractory chemicals even after anaerobic treatment and causing adverse effects to the environment. The present study aimed to examine the phytotoxic, cytotoxic, and genotoxic potential of the identified refractory organic and inorganic pollutants discharged in bio-methanated distillery effluent (BMDE). Physico-chemical analyses revealed that BMDE retains high BOD, COD, TDS along with heavy metals like Fe (572.64 mg L^-1), Mn (4.269 mg L^-1), Cd (1.631 mg L^-1), Zn (2.547 mg L^-1), Pb (1.262 mg L^-1), (Cr 1.257 mg L^-1), and Ni (0.781 mg L^-1) beyond the permissible limits for effluent discharge. GC-MS analysis revelaed the presence of hexadecanoic acid, TMS ester; octadecanoic acid, TMS ester; 2,3 bis[(TMS)oxy]propyl ester; stigmasterol TMS ether; β-sitosterol TMS ester; hexacosanoic acid; and tetradecanoic acid, TMS ester as major refractory organic pollutants, which are listed as potential endocrine disruptor chemicals (EDCs) as per USEPA. Furthermore, phytotoxicity assessment with Phaseolus aureus L. showed the toxic nature of BMDE as it inhibited various seedling growth parameters, seed germination, and suppression of α-amylase activity in seed germination experiment. Moreover, genotoxicity and cytotoxicity evaluation of the discharged BMDE evidenced in root-tip meristematic cells of Allium cepa L. where chromosomal aberration such as disturbed metaphase, c-mitosis, laggard chromosomes, sticky chromosomes, prolonged prophase, polyploid cells, and apoptotic bodies etc. were observed. Thus, this study's results suggested that BMDE discharged without adequate treatment poses potential risk to environment and may cause a variety of serious health threats in living beings upon exposure.

Distillery wastewater detoxification and management through phytoremediation employing Ricinus communis L

This study aimed to assess the phytoremediation potential of Ricinus communis L. for heavy metals remediation via rhizospheric bacterial activities for distillery wastewater detoxification and management. Results revealed that distillery wastewater contained high levels of metals and other physico-chemical pollution parameters that could cause environmental pollution and aquatic toxicity. The identified bacterium produced several plant growth-promoting compounds including siderophores, ligninolytic enzymes, and indole acetic acid that resulted in nutrient enhancement and improved mineralization of metals in the plants during stress conditions. The bioconcentration factor (BCF) of all the metals examined were > 1, which showed that these metals are accumulating in the root, shoot, and leaves of Ricinus communis L. Most of the metals are stablised in the roots but Pb, Cd and Zn were translocated more to the shoorts (TC>1). The ability of Ricinus communis L. to grow in metals-containing distillery wastewater and reduce heavy metals and organic contaminants suggests that it can be used to provide an effective treatment of distillery wastewater. The use of Ricinus communis L. is an eco-friendly tool for the reduction of organometallic contamination and protecting agricultural land.

Bacterial degradation of distillery wastewater pollutants and their metabolites characterization and its toxicity evaluation by using Caenorhabditis elegans as terrestrial test models

Distillery wastewater has significant amount of coloring compounds and organic substances even after the secondary treatment process, which poses many severe environmental and health threats. However, the recalcitrant coloured compounds have not yet been clearly identified. In this study, two bacterial strains DS3 and DS5 capable to decolorize distillery wastewater (DWW) pollutants were isolated and characterized as Staphylococcus saprophyticus (MF182113) and Alcaligenaceae sp. (MF182114), respectively. Results showed that mixed bacterial culture was found more effective decolorizing 71.83% DWW compared to axenic culture DS3 and DS5 resulting only 47.94% and 50.67% decolorization, respectively. The FT-IR and LC-MS/MS analysis of untreated DWW showed the presence of many recalcitrant compounds having different functional groups, but after bacterial treatment, most of compounds get diminished and the toxicity of DWW was reduced significantly. Further, the Nile red staining of Caenorhabditis elegans exposed to untreated and bacteria treated DWW for evaluation of toxicity assay and results revealed that the worms exposed to untreated DWW showed sharp reduction in total fat content having more profound effects, suggesting the diminished nAchR signaling as compare to bacterial treated DWW. Hence, this study revealed that inadequate disposal of untreated DWW may cause transfer of toxic substances into the environment and receiving water bodies.

Experimental study and dynamic simulation of melanoidin adsorption from distillery effluent

This work aims to utilize fly ash from a thermal power station for melanoidin reduction from distillery effluent by adsorption. To accomplish this, coal fly ash was modified through chemical treatment and was then tested for melanoidin adsorption as a function of various melanoidin concentrations, contact time, and pH. The specific novelty of this study is the evaluation of coal fly ash as a low-cost adsorbent for melanoidin removal. Furthermore, the simulation study was carried out using Aspen ADSIM software in order to optimize the commercial usage of the prepared adsorbent. The main results achieved include the maximum removal efficiency of 84% which was reached at initial melanoidin concentration of 1100 mg L^-1 (5% dilution), pH 6, and a contact time of 120 min. The Langmuir and Freundlich isotherm models were used to evaluate adsorption isotherms. The maximum adsorption capacity of 281.34 mg/g was observed using the Langmuir isotherm. Furthermore, pseudo-first- and pseudo-second-order and intra-particle diffusion models were used to fit adsorption kinetic data. The pseudo-second-order was best describing the adsorption kinetic with a faster kinetic rate of 0.142 mg g-1 min^-1. CFA (coal fly ash) after acidic activation resulted in a slightly higher surface area, average pore volume, and pore size. The maximum breakthrough time and adsorbent saturation time were achieved at initial melanoidin concentration of 1 mol/lit, bed height of 2.5 m, and flow rate of 50 lit/min.

Degradation of methylene blue by natural manganese oxides: kinetics and transformation products

In this study, natural manganese oxides (MnO x ), an environmental material with high redox potential, were used as a promising low-cost oxidant to degrade the widely used dyestuff methylene blue (MB) in aqueous solution. Although the surface area of MnO x was only 7.17 m2 g-1, it performed well in the degradation of MB with a removal percentage of 85.6% at pH 4. It was found that MB was chemically degraded in a low-pH reaction system and the degradation efficiency correlated negatively with the pH value (4-8) and initial concentration of MB (10-50 mg l-1), but positively with the dosage of MnO x (1-5 g l-1). The degradation of MB fitted well with the second-order kinetics. Mathematical models were also built for the correlation of the kinetic constants with the pH value, the initial concentration of MB and the dosage of MnO x . Furthermore, several transformation products of MB were identified with HPLC-MS, which was linked with the bond energy theory to reveal that the degradation was initiated with demethylation.

Environmental pollution and health hazards from distillery wastewater and treatment approaches to combat the environmental threats: A review

Distillery industries are the key contributor to the world's economy, but these are also one of the major sources of environmental pollution due to the discharge of a huge volume of dark colored wastewater. This dark colored wastewater contains very high biological oxygen demand, chemical oxygen demand, total solids, sulfate, phosphate, phenolics and various toxic metals. Distillery wastewater also contains a mixture of organic and inorganic pollutants such as melanoidins, di-n-octyl phthalate, di-butyl phthalate, benzenepropanoic acid and 2-hydroxysocaproic acid and toxic metals, which are well reported as genotoxic, carcinogenic, mutagenic and endocrine disrupting in nature. In aquatic resources, it causes serious environmental problems by reducing the penetration power of sunlight, photosynthetic activities and dissolved oxygen content. On other hand, in agricultural land, it causes inhibition of seed germination and depletion of vegetation by reducing the soil alkalinity and manganese availability, if discharged without adequate treatment. Thus, this review article provides a comprehensive knowledge on the distillery wastewater pollutants, various techniques used for their analysis as well as its toxicological effects on environments, human and animal health. In addition, various physico-chemicals, biological as well as emerging treatment methods have been also discussed for the protection of environment, human and animal health.

Bio-refractory dissolved organic matter and colorants in cassava distillery wastewater: Characterization, coagulation treatment and mechanisms

An important portion of organic matter and colorants still remain in the biologically treated distillery wastewater, leaving the dark brown and odorous downstream with the heavy loading of chemical oxygen demand and the potential of forming disinfection byproducts. However, those bio-recalcitrant colorants have not been clearly recognized. The current study investigated the features of the bio-refractory organic matter and colorants in a typical distillery effluent, cassava distillery wastewater; special attention was paid to their change and behaviors in the coagulation treatment following the bio-processes. The wastewater analyses denoted that the fraction of high molecular weight (1-50 kDa and >50 kDa) became predominant after the anaerobic-aerobic processes. Importantly, the lignin breakdown products, melanoidins and lignin phenols were confirmed to be the leading colored components, according to the parallel factor analysis of fluorescence excitation-emission matrixes results. Compared with lignin phenols, the former two types of colorants exhibited stronger bio-refractory activity and resulted in smaller color reduction after the aerobic treatment. Neither advanced oxidation nor adsorption could perform efficiently as post-treatment for decolorization in this study. Nevertheless, high removal of color and dissolved organic matter (∼94.0% and ∼78.3%, respectively) could be achieved by the FeCl₃-involved coagulation under the optimal conditions. The ferric coagulant was found to preferably interact with the aromatic compounds (such as lignin derivatives) and melanoidins via either surface complexation or electric charge neutralization, or both. The findings presented herein might provide an insight into the evaluation of bio-refractory organic colorants and the Fe(III)-involved decolorization mechanisms of ethanol production wastewaters.

Carbon and nitrogen removal from glucose-glycine melanoidins solution as a model of distillery wastewater by catalytic wet air oxidation

Sugarcane molasses distillery wastewater contains melanoidins, which are dark brown recalcitrant nitrogenous polymer compounds. Studies were carried out in batch mode to evaluate Pt and Ru supported catalysts in the Catalytic Wet Air Oxidation (CWAO) process of a synthetic melanoidins solution, prepared by stoichiometric reaction of glucose with glycine. The addition of a catalyst slightly improved TOC removal compared with the non-catalytic reaction, and especially promoted the conversion of ammonium produced from organically-bound nitrogen in melanoidins to molecular nitrogen and nitrate. The selectivity to N2 attained 89% in the presence of the Pt catalysts in the reaction conditions used (TOC=2200mgL(-1), TN=280mgL(-1), 0.5g catalyst loaded with 3% metal, 210°C, 70bar total air pressure). To avoid leaching of the active metal by organically-bound nitrogen, the reaction was very efficiently performed in a two-step reaction consisting in WAO to convert nitrogen into ammonium, before the introduction of a catalyst.