Photocatalytic inactivation of human adenovirus 40: Effect of dissolved organic matter and prefiltration

Efficient Chemical-Free Degradation of Waterborne Micropollutants with an Immobilized Dual-Porous TiO2 Photocatalyst

Photocatalytic advanced oxidation processes (AOPs) promise a chemical-free route to energy-efficient degradation of waterborne micropollutants if long-standing mass transfer and light management issues can be overcome. Herein, we developed a dual-porous photocatalytic system consisting of a mesoporous (i.e., 2-50 nm pores) TiO2 (P25) photocatalyst supported on macroporous (i.e., >50 nm pores) fused quartz fibers (P25/QF). Our reusable photocatalytic AOP reduces chemical consumption and exhibits excellent energy efficiency, demonstrated by degrading various pharmaceutical compounds (acetaminophen, sulfamethoxazole, and carbamazepine) in natural waters with electrical energy per order (EEO) values of 4.07, 0.96, and 1.35 kWh/m3, respectively. Compared to the conventional H2O2/UVC AOP, our photocatalytic AOP can treat water without chemical additives while reducing energy consumption by over 2800%. We examine these improvements based on mass transport and optical (UVA and UVC) transmittance and demonstrate that the enhancements scale with increasing flow rate.

Continuous inactivation of human adenoviruses in water by a novel g-C3N4/WO3/biochar memory photocatalyst under light-dark cycles

Viruses transmitted by water have raised considerable concerns for public health. A novel memory photocatalyst of g-C₃N₄/WO₃/biochar was successfully developed for effective inactivation of human adenoviruses (HAdVs) in water, in which WO₃ as an electron-storage reservoir and biochar as an electron shuttle is employed to synergistically improve photocatalytic activity of g-C₃N₄. The tertiary composite exhibited continuous photocatalytic performance for HAdVs inactivation without regrowth in water under light-dark cycles, i.e., ∼3.9-log inactivation under 6-h visible light irradiation and an additional ∼1.1-log inactivation under the following 6-h dark. The enhanced virucidal mechanism was attributed to the heterojunction formation and especially the electron-transfer pathway switching via biochar incorporation, contributing to electron transfer and storage in the light phase and then electron release in the dark phase, along with obviously increased generation of the virus-killing •OH radicals under light-dark cycles.

Antiviral nanopharmaceuticals: Engineered surface interactions and virus-selective activity

The COVID-19 pandemic has inspired large research investments from the global scientific community in the study of viral properties and antiviral technologies (e.g., self-cleaning surfaces, virucides, antiviral drugs, and vaccines). Emerging viruses are a constant threat due to the substantial variation in viral structures, limiting the potential for expanded broad-spectrum antiviral agent development, and the complexity of targeting multiple and diverse viral species with unique characteristics involving their virulence. Multiple, more infectious variants of SARS-CoV2 (e.g., Delta, Omicron) have already appeared, necessitating research into versatile, robust control strategies in response to the looming threat of future viruses. Nanotechnology and nanomaterials have played a vital role in addressing current viral threats, from mRNA-based vaccines to nanoparticle-based drugs and nanotechnology enhanced disinfection methods. Rapid progress in the field has prompted a review of the current literature primarily focused on nanotechnology-based virucides and antivirals. In this review, a brief description of antiviral drugs is provided first as background with most of the discussion focused on key design considerations for high-efficacy antiviral nanomaterials (e.g., nanopharmaceuticals) as determined from published studies as well as related modes of biological activity. Insights into potential future research directions are also provided with a section devoted specifically to the SARS-CoV2 virus. This article is categorized under: Toxicology and Regulatory Issues in Nanomediciney > Toxicology of Nanomaterials Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory Disease.

Current perspective in metal oxide based photocatalysts for virus disinfection: A review

Nanotechnology holds huge potential for the prevention of various viral outbreaks that have increased at a disquieting rate over the past decades. Metal oxide nanomaterials with oxidative capability are the effective materials that provide platforms as well as tools for the well understanding of the mechanism, its detection, and treatment of various viral diseases like measles, influenza, herpes, ebola, current COVID-19 etc. In this inclusive review, we survey various previous research articles on different notable photoactive transition metal oxides that possess enough potential to act as antiviral agents for the deactivation of harmful viruses. We investigated and highlighted the plausible photocatalytic oxidative mechanism of photoactive transition metal oxides in degrading viral coatings, genomic RNA using suitable free radical generation. The key finding of the present review article including the discovery of a vision on the suitable photocatalytic transition metal oxides that have been proven to be excellent against harmful viruses and consequently combatting deadly CoV-2 in the environment. This review intends to provide conclusive remarks and a realistic outlook on other advanced photocatalytic metal oxides as a potential solution in battling other similar upcoming pandemics.

Photocatalytic Inactivation of Viruses Using Graphitic Carbon Nitride-Based Photocatalysts: Virucidal Performance and Mechanism

The prevalence of lethal viral infections necessitates the innovation of novel disinfection techniques for contaminated surfaces, air, and wastewater as significant transmission media of disease. The instigated research has led to the development of photocatalysis as an effective renewable solar-driven technology relying on the reactive oxidative species, mainly hydroxyl (OH●) and superoxide (O2●−) radicals, for rupturing the capsid shell of the virus and loss of pathogenicity. Metal-free graphitic carbon nitride (g-C3N4), which possesses a visible light active bandgap structure, low toxicity, and high thermal stability, has recently attracted attention for viral inactivation. In addition, g-C3N4-based photocatalysts have also experienced a renaissance in many domains, including environment, energy conversion, and biomedical applications. Herein, we discuss the three aspects of the antiviral mechanism, intending to highlight the advantages of photocatalysis over traditional viral disinfection techniques. The sole agenda of the review is to summarize the significant research on g-C3N4-based photocatalysts for viral inactivation by reactive oxidative species generation. An evaluation of the photocatalysis operational parameters affecting viral inactivation kinetics is presented. An overview of the prevailing challenges and sustainable solutions is presented to fill in the existing knowledge gaps. Given the merits of graphitic carbon nitride and the heterogeneous photocatalytic viral inactivation mechanism, we hope that further research will contribute to preventing the ongoing Coronavirus pandemic and future calamities.

A review on the potential of photocatalysis in combatting SARS-CoV-2 in wastewater

Photocatalytic technology offers powerful virus disinfection in wastewater via oxidative capability with minimum harmful by-products generation. This review paper aims to provide state-of-the-art photocatalytic technology in battling transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in wastewater. Prior to that, the advantages and limitations of the existing conventional and advanced oxidation processes for virus disinfection in water systems were thoroughly examined. A wide spectrum of virus degradation by various photocatalysts was then considered to understand the potential mechanism for deactivating this deadly virus. The challenges and future perspectives were comprehensively discussed at the end of this review describing the limitations of current photocatalytic technology and suggesting a realistic outlook on advanced photocatalytic technology as a potential solution in dealing with similar upcoming pandemics. The major finding of this review including discovery of a vision on the possible photocatalytic approaches that have been proven to be outstanding against other viruses and subsequently combatting SARS-CoV-2 in wastewater. This review intends to deliver insightful information and discussion on the potential of photocatalysis in battling COVID-19 transmission through wastewater.

A year-long cyclic pattern of dissolved organic matter in the tap water of a metropolitan city revealed by fluorescence spectroscopy

Delivering drinking water with stable quality in metropolitan cities is a big challenge. This study investigated the year-long dynamics of dissolved organic matter (DOM) in the tap water and source water of a metropolitan city in southern China using fluorescence spectroscopy. The DOM detected in the tap water, and source water of Shenzhen city was season and location-dependent. A year-long cyclic trend of DOM was found with predominate protein-like fluorescence in the dry season compared to the humic-like enriched DOM in the wet season. A general DOM pattern was estimated by measuring the shift in dominant fluorescence regions on the excitation-emission matrix (EEM). The difference in fluorescent DOM (FDOM) composition (in terms of the ratio of protein-like to humic-like fluorescence) was above 200% between wet and dry seasons. The taps associated with reservoirs receiving water from the eastern tributary of Dongjiang River showed significant changes in protein-like contents than the taps with source water originating from the western part of the river. This study highlights the importance of optimizing drinking water treatment plants' operational conditions after considering seasonal changes and source water characteristics.