Coagulation of dissolved organic matter in surface water by novel titanium (III) chloride: Mechanistic surface chemical and spectroscopic characterisation

Origin, types, and contribution of emerging pollutants to environmental degradation and their remediation by physical and chemical techniques

The growing presence of emerging pollutants (EPs) in aquatic environments, as well as their harmful impacts on the biosphere and humans, has become a global concern. Recent developments and advancements in pharmaceuticals, agricultural practices, industrial activities, and human personal care substances have paved the way for drastic changes in EP concentrations and impacts on the ecosystem. As a result, it is critical to mitigate EP's harmful effects before they jeopardize the ecological equilibrium of the overall ecosystem and the sustainable existence of life on Earth. This review comprehensively documented the types, origins, and remediation strategies of EPs, and underscored the significance of this study in the current context. We briefly stated the major classification of EPs based on their organic and inorganic nature. Furthermore, this review systematically evaluates the occurrence of EPs due to the fast-changing ecological scenarios and their impact on human health. Recent studies have critically discussed the emerging physical and chemical processes for EP removal, highlighting the limitations of conventional remediation technologies. We reviewed and presented the challenges associated with EP remediation and degradation using several methods, including physical and chemical methods, with the application of recent technologies. The EP types and various methods discussed in this review help the researchers understand the nature of present-day EPs and utilize an efficient method of choice for EP removal and management in the future for sustainable life and development activities on the planet.

An innovative exploration to identify and isolate the dominant-flocculated-species from polytitanium chloride synthesized by electrodialysis

Abundance of dominant-flocculated-species is the key to determine coagulation performance of coagulant. Titanium-based coagulants have garnered considerable attention due to their high coagulation efficiency, but with a current challenge of the identification and isolation of the dominant-flocculated-species. Herein, polytitanium chloride (PTC), enriched with dominant-flocculated-species, was successfully synthesized by electrodialysis through accurate micro-interface control of the reaction among Ti-hydrolyzed-species and OH-. Special attention was paid to a feasible and high-effective strategy to isolate the dominant-flocculated-species from PTC through one-step rapid ultrafiltration. Selective preference was the ultrafiltration membranes (made of polyethersulfone) with a molecular weight cut-off of 5 kDa, which enabled the isolation of the dominant-flocculated-species, named PTC-5k. Results from the electrospray time-of-flight mass spectrometry (ESI-TOF-MS) proved a large proportion of the small and medium-sized hydrolyzed products as dominant-flocculated-species in PTC-5k, with the main signals concentrated between m/z 100 and 500. This composition achieved approximately 15.0% higher removal of organic matter with a 33.0% reduction in dosage compared to PTC. Unique snowflake-like branched structure of PTC-5k enhanced the coagulation mechanisms of sweeping and adsorption-bridging flocculation. Worth noting was the more compact flocs formed by PTC-5k than PTC, which was the probable reason for the mitigated fouling of ceramic membrane when PTC-5k was utilized as pre-treatment methodology. Continuous operation of ceramic membrane filtration up to 30 h, demonstrated 30% improvement in stable flux compared to PTC. This study provides the strategy for the isolation of Ti-dominant-flocculated-species, and lays the foundation for practical application.

Co-fermentation of titanium-flocculated-sludge with food waste towards simultaneous water purification and resource recovery

Recovery of resources from domestic sewage and food waste has always been an international-thorny problem. Titanium-based flocculation can achieve high-efficient destabilization, quick concentration and separation of organic matter from sewage to sludge. This study proposed co-fermentation of the titanium-flocculated sludge (Ti-loaded sludge) and food waste towards resource recovery by converting organic matter to value-added volatile fatty acids (VFAs) and inorganic matter to struvite and TiO2 nanoparticles. When Ti-loaded sludge and food waste were co-fermented at a mass ratio of 3:1, the VFAs yield reached 3725.2 mg-COD/L (VFAs/SCOD 91.0%), which was more than 4 times higher than the case of the sludge alone. The 48-day semicontinuous co-fermentation demonstrated stable long-term operation, yielding VFAs at 2529.0 mg-COD/L (VFAs/SCOD 89.8%) and achieving a high CODVFAs/NNH4 of 58.9. Food waste provided sufficient organic substrate, enriching plenty of acid-producing fermentation bacteria (such as Prevotella 7 about 21.0% and Bacteroides about 9.4%). Moreover, metagenomic sequencing analysis evidenced the significant increase of the relative gene abundance corresponding to enzymes in pathways, such as extracellular hydrolysis, substrates metabolism, and VFAs biosynthesis. After fermentation, the precious element P (≥ 99.0%) and extra-added element Ti (≥99.0%) retained in fermented residues, without releasing to VFAs supernatant, which facilitated the direct re-use of VFAs as resource. Through simple and commonly used calcination and acid leaching methodologies, 80.9% of element P and 82.1% of element Ti could be successfully recovered as struvite and TiO2 nanoparticles, respectively. This research provides a strategy for the co-utilization of domestic sludge and food waste, which can realize both reduction of sludge and recovery of resources.

Microcosmic mechanism analysis of the combined pollution of aged polystyrene with humic acid and its efficient removal by a composite coagulant

The composite pollutants formed by aged polystyrene (APS) and natural organic matter are complex and harmful, which lead to the deterioration of water quality. In this work, the interaction mechanism between humic acid (HA) and APS was discussed by investigating the changes in their functional groups. Besides, a novel polyaluminum-titanium chloride composite coagulant (PATC) was prepared, and its binding behaviors with HA@APS under different pH conditions were analyzed from a microscopic perspective. It was found that at pH 4, π-π conjugation was the dominant interaction between HA and APS. And the main removal mechanism of HA@APS by PATC was surface complexation. With the increase of pH, π-π conjugation, n-π electron donor-acceptor interaction (EDA), and hydrogen bonding gradually dominated the interaction between APS and HA. At pH 7, PATC hydrolyzed to form various polynuclear Al-Ti species, which could meet the demand for different binding sites of HA@APS. Under alkaline conditions, HB and n-π EDA in HA@APS were weakened, while π-π conjugation held a dominant position again. At this time, the main coagulation mechanism of PATC changed from charge neutralization to sweeping action, accompanied by hydrogen bonding. ENVIRONMENTAL IMPLICATION: Microplastics (MPs) have attracted the public's attention due to their potential toxicity to humans. The combined pollution of aged microplastics and humic acid (HA) will bring great harm to aquatic environment. The development of novel composite coagulants is hopeful to efficiently remove MPs and their combined pollutants. Elucidating the interactions between HA and aged MPs is helpful to understand the transformation and fate of MPs in actual environments, and to reveal the removal mechanism of composite pollutants by coagulation. The findings presented here will provide theoretical guidance for addressing the challenges of coagulation technology in treating new pollutants in practice.

Hybrid hydrodynamic cavitation (HC) technique for the treatment and disinfection of lake water

Water reclamation from lakes needs to be accomplished efficiently and affordably to ensure the availability of clean, disinfected water for society. Previous treatment techniques, such as coagulation, adsorption, photolysis, ultraviolet light, and ozonation, are not economically feasible on a large scale. This study investigated the effectiveness of standalone HC and hybrid HC + H₂O₂ treatment techniques for treating lake water. The effect of pH (3 to 9), inlet pressure (4 to 6 bar), and H₂O₂ loading (1 to 5 g/L) were examined. At pH = 3, inlet pressure of 5 bar and H₂O₂ loadings of 3 g/L, maximum COD and BOD removal were achieved·H₂O₂ was observed to significantly improve the performance of the HC when used as a chemical oxidant. In an optimal operating condition, a COD removal of 54.5 % and a BOD removal of 51.5 % using HC alone for 1 h is observed. HC combined with H₂O₂ removed 64 % of both COD and BOD. The hybrid HC + H₂O₂ treatment technique resulted in a nearly 100% removal of pathogens. The results of this study indicate that the HC-based technique is an effective method for removing contaminants and disinfection of the lake water.

Performance study of fly-ash-derived coagulant in removing natural organic matter from drinking water: synthesis, characterization, and modelling

This study is an attempt to develop a liquid coagulant using fly ash (FAC) for removing natural organic matter (NOM) from drinking water systems. Acid-alkali leaching and polymerization technique was used for developing FAC. Characterization of FAC was performed using Fourier-transform infrared spectroscopy (FESEM), field emission scanning electron microscopy (FTIR), and X-ray diffraction (XRD) to assess the surface morphology and functional groups present. FE SEM analysis revealed uneven, coarse, and irregular structure with numerous pores, an indicative of their high adsorption capacity. XRD study revealed that Al, Fe, and Si are the major constituent group of FAC. FAC demonstrated excellent potential in removing THMs precursors: dissolved organic carbon (84.46%), UV₂₅₄ (90.57%), and turbidity (96.85%) from the drinking water systems. Charge neutralization followed by adsorption is the main mechanism behind NOM removal. Moreover, FAC also showed good capability in minimizing the reactivity of NOM (ASI-72.86%) towards THM formation. FAC proved to be a good alternative for conventional coagulant used in drinking water treatment and can be effectively used for reducing NOM content of raw water which leads to the formation of THMs on chlorination.

Coagulation removal of dissolved organic matter (DOM) in nanofiltration concentrate of biologically treated landfill leachate by ZrCl4: Performance, mechanism and coagulant recycling

Coagulation treatment is often applied for removing the residual refractory dissolved organic matter (DOM) in biologically treated landfill leachate nanofiltration concentrate (LLNC) before discharge or further desalination treatment. However, the DOM removal efficiency by traditional coagulant needs to be improved, and two problems including the coagulant loss and difficulty in disposal of coagulation sludge need to be resolved. Based on this practical demand, a new coagulant ZrCl₄ was adopted for LLNC treatment for the first time. The results showed that, ZrCl₄ was better than the traditional coagulants (FeCl₃ and AlCl₃) for DOM removal. Under the optimal condition of pH 6.0 and ZrCl₄ dosage of 5.0 mM, the DOC content, UV₂₅₄ and chromaticity of the LLNC reduced by 73.32%, 83.17% and 93.59%, respectively. All of the coagulants tested in this study could efficiently remove the hydrophobic and high molecular organics. There was an obvious difference between them for removal of hydrophobic, and small or medium molecular organics, and ZrCl₄ was more effective. This might be due to the stronger negative charge neutralization capacity and larger floc size of ZrCl₄, which was beneficial for DOM combination and adsorption. The loss of zirconium was only 2.11%, which was much lower than that of iron and aluminum. Furthermore, being recycled for 3 times after coagulant regeneration, the recovered zirconium coagulant showed no obvious difference with the original ZrCl₄ for DOM removal, indicating the disposal problem of the produced coagulation sludge can be resolved. This study could provide a promising method for LLNC treatment.

Highly efficient Al-Ti gel as a coagulant for surface water treatment: Insights into the hydrolysate transformation and coagulation mechanism

In view of the insufficient coagulation efficiency of traditional inorganic coagulants, a series of Al-Ti gels with different Ti/triethanolamine (TEA), Ti/H₂O, and Ti/Al molar ratios were prepared by sol-gel process in this study. Fourier transform infrared (FTIR) spectra of the Al-Ti gels preliminarily confirmed the interaction between Al and Ti by detecting the appearance of the Al-O-Ti bond. The peak shift of the chemical bonds in X-ray photoelectron spectra (XPS) and the transformation of the hydrolysate species in the Al-Ti gels were analyzed to further explore the interaction mechanism between Al and Ti. It was found that moderate TEA could inhibit the hydrolysis of Ti precursors by taking up the coordination sites of H₂O to form a CO-Ti bond. Density functional theory (DFT) calculation results showed that Ti could be incorporated into the framework of aluminum hydrolysates to form an Al-O-Ti bond, and [Al₂Ti₂(OH)_x(TEA)_y(H₂O)_8-x-y]^14-x was the most possible copolymerization hydrolysate. Based on the above research results, the most efficient Al-Ti gel was selected and applied to the actual lake water treatment. The highest UV₂₅₄ removal efficiency with the addition of Al-Ti gel was > 60%, nearly 25% higher than that of Ti gel. The hydrolysates of Al-Ti gel, such as TiO(OH)_2(am), Al(OH)_3(am), and [Al₂Ti₂(OH)_x(TEA)_y(H₂O)_8-x-y]^14-x, could remove organic matters through the incorporation of charge neutralization, adsorption, complexation, and sweeping effects. These results provide a new idea for studying the interaction mechanism between Al and Ti in composite coagulants, and have theoretical guiding significance to actual water treatment.

Coagulation behavior of polyaluminum-titanium chloride composite coagulant with humic acid: A mechanism analysis

The hydrolysate species of metal-based coagulants and the binding sites of humic acid (HA) are highly dependent on the pH conditions. Exploring the binding sites and modes between coagulant hydrolysates and HA molecules is critical to understanding the coagulation mechanism. In this paper, the binding behavior between HA molecules and the hydrolysates of a polyaluminum-titanium chloride composite coagulant (PATC) was investigated under different pH conditions by semi-quantitative FTIR and XPS. It was found that oligomeric and mesopolymeric hydrolysates were the dominant species under acid conditions, which could complex with the hydroxyl and carboxyl groups of HA by forming COAl/Ti coordinate bonds. However, large amounts of H⁺ could compete with Al³⁺ and weaken the removal efficiency of HA. With the increase of pH, the hydrolysis process of the PATC and the deprotonation of HA were simultaneously underway. Under weakly acid conditions, the complexation of the aluminum hydrolysates with carboxyl groups was improved due to the gradually diminishing competition of H⁺ and the enhanced charge neutralization of the further polymerized hydrolysates. Consequently, the maximum UV₂₅₄ removal by adding PATC was observed at pH 6. Under alkaline conditions, the sweeping effect of amorphous hydroxide dominated the HA removals, which was accompanied by the surface complexation of Al/Ti nuclear with carboxyl groups as well as the hydrogen bonds between hydroxyl and hydroxide. This study provides a new clue for the interaction mechanisms between the hydrolysates of composite coagulants and the dominant functional groups of HA at various pH conditions.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Titanium-Containing Coagulants in Wastewater Treatment Processes in the Alcohol Industry

As part of the work, studies of the quality of wastewater from alcohol production were carried out; the main characteristics were determined, such as the charge of dispersed particles and the content of organic compounds and fats. A comparison is made of the effectiveness of titanium salts, traditional aluminum, and iron-containing coagulants. It has been established that titanium salts are much more effective than traditional reagents, but their high cost significantly limits the scope of their application. The possibility of increasing the efficiency of traditional coagulants by adding various titanium salts in an amount of up to 10% of the mass has been proved. It has been established that the addition of titanium compounds to aluminum or iron-containing coagulants makes it possible to increase the cleaning efficiency by an average of 10–20% while a significant reduction in the dose of reagents is possible, which will have a positive effect on the cost of the cleaning process. It was found that the addition of titanium salts to a coagulant based on aluminum sulfate allows not only an increase in the cleaning efficiency but also further intensifies the processes of sedimentation and filtration of coagulation sludge, which will significantly reduce the size of the treatment equipment and reduce capital costs.

Removal of refractory organics in wastewater by coagulation/flocculation with green chlorine-free coagulants

Coagulation/flocculation is considered an economical and practical technology to remove refractory organic matter from wastewater. Coagulants containing chlorine may release chloride ions into water, thereby resulting in corrosion. A green chlorine-free coagulant of polyaluminum ferric silicate (PSAF) was synthesized to treat non-oily (e.g., humus wastewater) and oily refractory wastewaters (e.g., lubricating oil wastewater). Results showed that the highest removal efficiency of humus substances in non-oily wastewater achieved 96.0% at pH 7.0 using PSAF alone. When treating oily wastewater, the dosage and addition sequence of PAMALAM significantly affected the coagulation performance. The removal efficiencies of turbidity, chemical oxygen demand, and total nitrogen were increased by 0.3, 1.8, and 5.9 folds, respectively, with the optimal adding sequence of PSAF +0.08% PAMALAM. More fulvic acid-like substances can be removed during this process. The analysis of zeta potential and floc properties revealed that charge neutralization, sweep, and adsorption/entrapment mechanisms existed during the single PSAF coagulation process, and PAMALAM mainly improved the adsorption, bridging, and sweep function.

Synthesis and NOx removal performance of anatase S-TiO2/g-CN heterojunction formed from dye wastewater sludge

In this study, sludges generated from Ti-based flocculation of dye wastewater were used to retrieve photoactive titania (S-TiO₂). It was heterojunctioned with graphitic carbon nitride (g-CN) to augment photoactivity under UV/visible light irradiance. Later the as-prepared samples were utilized to remove nitrogen oxides (NO_x) in the atmospheric condition through photocatalysis. Heterojunction between S-TiO₂ and g-CN was prepared through facile calcination (@550 °C) of S-TiO₂ and melamine mix. Advanced sample characterization was carried out and documented extensively. Successful heterojunction was confirmed from the assessment of morphological and optical attributes of the samples. Finally, the prepared samples' level of photoactivity was assessed through photooxidation of NO_x under both UV and visible light irradiance. Enhanced photoactivity was observed in the prepared samples irrespective of the light types. After 1 h of UV/visible light-based photooxidation, the best sample STC4 was found to remove 15.18% and 9.16% of atmospheric NO, respectively. In STC4, the mixing ratio of S-TiO₂, to melamine was maintained as 1:3. Moreover, the optical bandgap of STC4 was found as 2.65 eV, where for S-TiO₂, it was 2.83 eV. Hence, the restrained rate of photogenerated charge recombination and tailored energy bandgap of the as-prepared samples were the primary factors for enhancing photoactivity.

Determining the leading sources of N-nitrosamines and dissolved organic matter in four reservoirs in Southern China

The presence of carcinogenic N-nitrosamines and dissolved organic matter (DOM) in freshwater is a significant concern from the perspective of public health and drinking water treatment plant operation. This study investigated the N-nitrosamines concentration and their precursors' distributions, and DOM composition in four reservoirs located in a southern city of China. A total of 22 renowned precursors were identified. Precursors from industrial and pharmaceutical origins were found to be dominant in all reservoirs; however, traces of pesticide-based precursors, i.e. pirimicarb and cycluron were also found. The distribution of nine N-nitrosamines was substantially different among the reservoirs. N-Nitrosodibutylamine (NDBA), N-Nitrosopiperidine (NPIP), N-Nitrosodimethylamine (NDMA), and N-Nitrosopyrrolidine (NPYR) were abundantly present in all reservoirs. Most of N-nitrosamines except NDMA and N-nitrosodiethylamine (NDEA) were far below the generally accepted cancer risk of 10^-6, and NDMA/NDEA were found close to the risk level (10^-6). Anthropogenic DOM was dominant in three reservoirs as depicted by a higher biological index (BIX) than the humification index (HIX). By the principle component analysis, BIX appeared as an indicator of N-nitrosamines (except NDEA and NPIP). A strong and direct relationship was observed between the NDMA-formation potential (FP) and concentration of total N-nitrosamines (∑NA), and BIX. These results confirmed that the anthropogenic activities were the leading source of DOM and N-nitrosamines in this city based on land-use.

Comparison of poly ferric chloride and poly titanium tetrachloride in coagulation and flocculation process for paper and cardboard wastewater treatment

The current study investigated the efficiency of poly ferric chloride (PFC) and poly titanium tetrachloride (PTC) in coagulation-flocculation process for treatment of paper and cardboard wastewater. The effect of pH (5-11), coagulant concentrations (100-1000 mg/L), mixing rate (10-60 rpm), mixing time (5-25 min), and settling time (5-30 min) were examined. The results showed that the removal efficiency for turbidity, total suspended solids (TSS), and chemical oxygen demand (COD) by PFC and PTC coagulants increased with pH rising up to 9 for the former and 7 for the latter coagulant. Furthermore, the removal efficiency for the afore-mentioned parameters increased along with a 30 rpm increase in the mixing rate, while the mixing time reached 20 min. It was also found that the best removal efficiencies for turbidity, TSS, and COD by PFC under optimal conditions (pH 9, coagulant dose 800 mg/L, and settling time of 25 min) were 97.11%, 99.1%, and 84.91%, respectively. In addition, the removal efficiencies for PTC (optimal conditions of pH 7, coagulant dose 600 mg/L, and settling time of 15 min) were found to be 98.29%, 99.29%, and 86.42%, respectively. Water recovery and the produced sludge volume by PFC were 80% and 200 cm³, respectively, in the settling time of 25 min and for PTC were 81.5% and 185 cm³, respectively, in the settling time of 15 min. Costs of the coagulation-flocculation process for treatment 1 m³ of paper and cardboard wastewater using PTC and PFC were 0.42 $ and 0.32 $, respectively. Finally, it can be concluded that compared to PFC, PTC with higher settling rate has a greater efficiency for treatment of paper and cardboard wastewater.

Characterization of titanium oxide optical band gap produced from leachate sludge treatment with titanium tetrachloride

This study investigated the coagulation performance of titanium tetrachloride (TiCl₄) for leachate treatment and preparation of titanium oxide (TiO₂) from generated sludge through calcination process at different temperatures and times. TiCl₄ with chitosan as coagulant aid employed to perform coagulation process on Alor Ponhsu Landfill leachate. Further calcination process was done to synthesize TiO₂ from produced sludge for photocatalytic applications. The studied factors included pH, TiCl₄ dosage, and chitosan dosage. The results indicated that maximum reduction in suspended solids was 92.02% at pH 4, 1200 mg/L TiCl₄, and 250 mg/L chitosan addition, and maximum reduction in chemical oxygen demand was 71.92% at experimental condition of 1200 mg/L TiCl₄ and 500 mg/L chitosan with pH 10. The maximum and minimum band gaps of prepared TiO₂ achieved at 3.35 eV and 2.75 eV, respectively. Morphology and phase analysis of prepared TiO₂ characterized using scanning electron microscope (SEM) and X-ray diffraction (XRD). The XRD spectrums showed the anatase phase at lower calcination temperature and the rutile phase at elevated temperature. The photocatalysis activity of produced TiO₂ investigated under UV irradiation and showed almost fast degradation similar to commercial TiO₂. The results indicated that TiO₂ powder was successfully prepared from generated sludge from TiCl₄ coagulation for photocatalytic applications.

Monitoring dissolved organic matter in wastewater and drinking water treatments using spectroscopic analysis and ultra-high resolution mass spectrometry

Dissolved organic matter (DOM) plays a critical role in determining the quality of wastewater and the safety of drinking water. This is the first review to compare two types of popular DOM monitoring techniques, including absorption spectroscopy and fluorescence excitation-emission matrices (EEMs) coupled with parallel factor analysis (PARAFAC) vs. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS), for the applications in wastewater and drinking water treatments. The optical techniques provide a series of indices for tracking the quantity and quality of chromophoric and fluorescent DOM, while FT-ICR-MS is capable of identifying thousands of DOM compounds in wastewater and drinking water at the molecule level. Both types of monitoring techniques are increasingly used in studying DOM in wastewater and drinking water treatments. They provide valuable insights into the variability of DOM composition in wastewater and drinking water. The complexity and diversity of DOM highlight the challenges for effective water treatments. Different effects of various treatment processes on DOM are also assessed, which indicates that the information on DOM composition and its removal is key to optimize the treatment processes. Considering notable progress in advanced treatment processes and novel materials for removing DOM, it is important to continuously utilize these powerful monitoring tools for assessing the responses of different DOM constituents to a series of treatment processes, which can achieve an effective removal of DOM and the quality of treated water.

Cytotoxic aquatic pollutants and their removal by nanocomposite-based sorbents

Water is an extremely essential compound for human life and, hence, accessing drinking water is very important all over the world. Nowadays, due to the urbanization and industrialization, several noxious pollutants are discharged into water. Water pollution by various cytotoxic contaminants, e.g. heavy metal ions, drugs, pesticides, dyes, residues a drastic public health issue for human beings; hence, this topic has been receiving much attention for the specific approaches and technologies to remove hazardous contaminants from water and wastewater. In the current review, the cytotoxicity of different sorts of aquatic pollutants for mammalian is presented. In addition, we will overview the recent advances in various nanocomposite-based adsorbents and different approaches of pollutants removal from water/wastewater with several examples to provide a backdrop for future research.

The role of hydraulic conditions of coagulation and flocculation on the damage of cyanobacteria

Limited information exists on the damage of harmful cyanobacteria cells, such as Raphidiopsis raciborskii and Dolichospermum circinale, caused by the hydraulic conditions at water treatment plants especially when it comes to the mechanical stresses imposed by coagulation and flocculation. To close this gap, this study evaluated the impacts of rapid and slow-mixing on R. raciborskii and D. circinale cells and trichomes. The hydraulic conditions used during the experiment were selected based on AWWA, which are widely applied in the absence of specific treatability tests. Cellular integrity was evaluated by the Erythrosine B staining method and logistic regression was used to study the association between organism integrity and hydraulic conditions (i.e., velocity gradient and mixing time). Wilcoxon rank-sum test was used to verify if there was a significant reduction of the trichome length and cell integrity. Rapid-mixing (velocity gradient of 750 s^-1 for 60 s) reduced the odds of finding intact D. circinale to <50%, whereas the odds of finding intact R. raciborskii cells did not significantly decrease. The odds of finding intact cells of R. raciborskii were 124 times greater than D. circinale. Rapid-mixing also reduced the length of D. circinale trichomes by approximately 50% but did not significantly decrease R. raciborskii trichomes. Slow-mixing did not significantly affect organisms or trichomes of either species. The results indicate that AWWA recommendations for coagulation may cause damage to D. circinale but not to R. raciborskii, suggesting that the operation of water treatment plants could be adjusted according to the dominant cyanobacterium present in the reservoir to avoid cell rupture and metabolite release.

Characterization and application of poly-ferric-titanium-silicate-sulfate in disperse and reactive dye wastewaters treatment

A novel coagulant poly-ferric-titanium-silicate-sulfate (PFTS) was synthesized and employed to treat two typical kinds of dye wastewaters-disperse blue and reactive yellow. The results indicated that PFTS with a Si/Fe molar ratio of 0.02 exhibited superior coagulation performance, especially under alkaline condition. The residual turbidity after coagulation by PFTS was only half of that after coagulation by poly-ferric-titanium sulfate (T-PSF). The sludge volume index was also reduced by PFTS compared to T-PSF in reactive dye treatment. Through the structure and morphology investigation of PFTS, it was found that new bonds of Si-O-Fe, Si-O-Ti and Fe-OH (Si-OH) were formed, and multi-branched structures and expanded surface area were generated. Additionally, compared with T-PSF, the floc strength and the floc size were also enhanced by PFTS, which was attributed to the polymerization between polysilicic acid and Fe/Ti which formed multi-branched structures, and finally adsorption and bridging ability of the coagulant was improved. Furthermore, the floc formed in reactive yellow wastewater treatment was larger and looser than that formed in disperse blue wastewater, with poorer strength and recovery ability, which can also interpret the better coagulation efficiency in disperse dye water treatment. From the results of coagulant characterization, zeta potential and flocs properties, it can be inferred that charge neutralization by the positive charged hydrolysate of coagulant was identified as the critical effect in disperse dyes removal, while the sweep and adsorption of metal hydroxyl compound formed during the hydrolysis of coagulants were considered to play a key role in reactive dye removal.

Preparation and characterization of TiO2 generated from synthetic wastewater using TiCl4 based coagulation/flocculation aided with Ca(OH)2

This study focused on the preparation of undoped and Ca-doped titania from flocculation generated sludge. Initially, TiCl₄ was utilised to perform coagulation and flocculation in synthetic wastewater and an optimised dose of coagulant was determined by evaluating the turbidity, dissolved organic carbon (DOC) and zeta potential of the treated water. Later, using Ca(OH)₂ as a coagulant aid, the effects on effluent pH, turbidity and DOC removal were investigated. Both Ca-doped and undoped anatase TiO₂ were prepared from the flocculated sludge for morphological and photocatalytic evaluation. During the standalone use of TiCl₄, maximum turbidity and DOC removal were found at 11.63 and 14.54 mg Ti/L, respectively. At the corresponding coagulant dose, rapid deprotonation of water caused the pH of the effluent to reach below 3.77 mg Ti/L. Whereas, when using Ca(OH)₂ as a coagulant aid, a neutral pH (7.26) was attained at a simultaneous dosing of 32.40 mg Ca/L and 14.54 mg Ti/L. When aided with Ca(OH)₂, the turbidity removal was further increased by 54.28% and the DOC removal was somewhat similar to the standalone use of TiCl₄. TiO₂ was prepared by incinerating the collected sludge at 600 °C for 2 h. Both XRD and SEM analysis were conducted to observe the morphology of the prepared titania. The XRD pattern of the TiO₂ showed only an anatase phase along with the presence of a high atomic proportion of Ca (4.14%). Consequently, a high amount of Ca atoms inhibited the level of TiO₂ phase and no obvious presence of CaO was observed. The prepared Ca-doped TiO₂ at the optimised dose of Ca(OH)₂ was found to be inferior to the undoped TiO₂ during the photodegradation of acetaldehyde. However, a reduced dose of Ca(OH)₂ (<15 mg Ca/L) exhibited a substantial increase in photoactivity under UV irradiance.

Effective removal by coagulation of contaminants in concentrated leachate from municipal solid waste incineration power plants

Municipal solid waste (MSW) incineration is widely used in China. Concentrated leachate, containing high concentrations of pollutants, is an important type of secondary pollution produced in MSW incineration power plants and requires proper treatment. In this study, various coagulants were used to treat concentrated leachate from a nanofiltration (NF) membrane that treated leachate from an MSW incineration plant. The optimal coagulation condition was determined in this study. Under the optimal condition, removals of chemical oxygen demand, light absorbing substances (at 254 nm), total nitrogen, color and turbidity were 68.42%, 69.01%, 44.14%, 92.31% and 87.44%, respectively. Much of the refractory organic matter with relatively high molecular weight, aromaticity and humification degree was removed, and effluent had a lower molecular weight than raw NF concentrated leachate. Study also found that some parts of high molecular weight compounds from NF CL were removed by coagulation process, but the change of distribution of molecular weight was not outstanding. The NF concentrated leachate, both before and after coagulation, contained a large amount of chloride. Hence, a follow-up study should be conducted to find an effective additional processing that can remove organic matter using the high concentration of chloride in the NF concentrated leachate coagulation effluent. This study provides a theoretical basis for the treatment of concentrated leachate from MSW incineration power plants.