Efficient nitrate removal from water using selected cathodes and Ti/PbO2 anode: Experimental study and mechanism verification

Wastewater Treatment Using Membrane Bioreactor Technologies: Removal of Phenolic Contaminants from Oil and Coal Refineries and Pharmaceutical Industries

Huge amounts of noxious chemicals from coal and petrochemical refineries and pharmaceutical industries are released into water bodies. These chemicals are highly toxic and cause adverse effects on both aquatic and terrestrial life. The removal of hazardous contaminants from industrial effluents is expensive and environmentally driven. The majority of the technologies applied nowadays for the removal of phenols and other contaminants are based on physio-chemical processes such as solvent extraction, chemical precipitation, and adsorption. The removal efficiency of toxic chemicals, especially phenols, is low with these technologies when the concentrations are very low. Furthermore, the major drawbacks of these technologies are the high operation costs and inadequate selectivity. To overcome these limitations, researchers are applying biological and membrane technologies together, which are gaining more attention because of their ease of use, high selectivity, and effectiveness. In the present review, the microbial degradation of phenolics in combination with intensified membrane bioreactors (MBRs) has been discussed. Important factors, including the origin and mode of phenols' biodegradation as well as the characteristics of the membrane bioreactors for the optimal removal of phenolic contaminants from industrial effluents are considered. The modifications of MBRs for the removal of phenols from various wastewater sources have also been addressed in this review article. The economic analysis on the cost and benefits of MBR technology compared with conventional wastewater treatments is discussed extensively.

Enhanced reduction of nitrate by TDER packed with surface-modified plastic particles electrodes

Based on Iron cathodes, nitrate could be selectively decomposed into other lower-valence nitrogen compounds, including ammonia, nitrogen gas, nitrite and nitric oxide, but the removal efficiencies of nitrate and total nitrogen (TN), are affected significantly by the synergistic effects of anodes, chloride electrolyte and conductive plastic particles electrodes. In this work, the base material Titanium (Ti) metal plates and plastic particles which surfaces were mainly coated with Ru-Sn oxidizing compounds, were applied as plates anodes and conductive particles electrodes in Three Dimensional Electrode Reactors (TDER). The Ti/RuSn plate anodes showed excellent performance on degrading nitrate, more nitrogen gas (83.84%) and less ammonia (15.51%) was produced, less TN and Iron ion (0.02 mg/L) was left in the wastewater, and less amount of chemical sludge (0.20 g/L) was produced. Furthermore, the removal efficiencies of nitrate and TN were further increased by the surface-modified plastic particles, which were cheap, reusable, corrosion-resistance, easy to obtain as manufactured materials and light to be suspended in waters. The degradation of nitrate and its intermediates was enhanced possibly by the continuous synergistic reactions initiated by hydrogen radicals, which was generated on the countless surficial active Ru-Sn sites of Ti/RuSn metal plate anodes and plastic particles electrodes, among residual nitrogen intermediates, most of ammonia was selectively converted to gaseous nitrogen by hypochlorite from chloride ion reaction.

Direct Synthesis of Ammonia from Nitrate on Amorphous Graphene with Near 100% Efficiency

Ammonia is an indispensable commodity in the agricultural and pharmaceutical industries. Direct nitrate-to-ammonia electroreduction is a decentralized route yet challenged by competing side reactions. Most catalysts are metal-based, and metal-free catalysts with high nitrate-to-ammonia conversion activity are rarely reported. Herein, it is shown that amorphous graphene synthesized by laser induction and comprising strained and disordered pentagons, hexagons, and heptagons can electrocatalyze the eight-electron reduction of NO₃ ^- to NH₃ with a Faradaic efficiency of ≈100% and an ammonia production rate of 2859 µg cm^-2 h^-1 at -0.93 V versus reversible hydrogen electrode. X-ray pair-distribution function analysis and electron microscopy reveal the unique molecular features of amorphous graphene that facilitate NO₃ ^- reduction. In situ Fourier transform infrared spectroscopy and theoretical calculations establish the critical role of these features in stabilizing the reaction intermediates via structural relaxation. The enhanced catalytic activity enables the implementation of flow electrolysis for the on-demand synthesis and release of ammonia with >70% selectivity, resulting in significantly increased yields and survival rates when applied to plant cultivation. The results of this study show significant promise for remediating nitrate-polluted water and completing the NO_x cycle.

Advances in iron-based electrocatalysts for nitrate reduction

Excessive nitrate has been a critical issue in the water environment, originating from the burning of fossil fuels, inefficient use of nitrogen fertilizers, and discharge of domestic and industrial wastewater. Among the effective treatments for nitrate reduction, electrocatalysis has become an advanced technique because it uses electrons as green reducing agents and can achieve high selectivity through cathode potential control. The effectiveness of electrocatalytic nitrate reduction (NO₃RR) mainly lies in the electrocatalyst. Iron-based catalysts have the advantages of high activity and low cost, which are well-used in the field of electrocatalytic nitrates. A comprehensive overview of the electrocatalytic mechanism and the iron-based materials for NO₃RR are given in terms of monometallic iron-based materials as well as bimetallic and oxide iron-based materials. A detailed introduction to NO₃RR on zero valent iron, single-atom iron catalysts, and Cu/Fe-based bimetallic electrocatalysts are provided, as they are essential for the improvement of NO₃RR performance. Finally, the advantages of iron-based materials for NO₃RR and the problems in current applications are summarized, and the development prospects of efficient iron-based catalysts are proposed.

Boosting generation of reactive oxygen and chlorine species on TNT photoanode and Ni/graphite fiber cathode towards efficient oxidation of ammonia wastewater

Photoelectrocatalytic (PEC) process combining the merits of photocatalysis and electrocatalysis is considered as a promising ammonia oxidation technology for water treatment. However, some key issues, such as the limited in situ generation of oxidants on photoanode, slow mass transfer problem and generation of nitrate/nitrite by-products hinder the further application of PEC process in the treatment of ammonia pollutant. In this study, the graphite felt (GF) cathodes modified by different transition metals (Ni, Fe, Mn, Co, Cu) were screened by physicochemical and photoelectrochemical characterizations. The results show that the Ni-GF cathode with more Ni⁰ uniformly distributed on the GF surface had the best electrocatalytic activity to generate H₂O₂. The PEC system composed of 10.0 wt% Ni-GF cathode and optimized titania nanotubes (TNTs) photoanode selectively converted about 96.1% ammonia to N₂ within 90 min. Compared with the single TNTs photoanode system, the ammonia oxidation reaction rate constant of the synergistic PEC oxidation system was increased by about two times, which demonstrated the role of the oxidants simultaneously generated on both anode and cathode. The in situ generated reactive oxygen-based oxidants and chlorine-based oxidants interacted together, and ClO• acted a leading role in the ammonia oxidation which were confirmed by quenching and probe experiments. In addition, the contributions of •OH and ClO• were significantly improved in the synergistic PEC oxidation system, compared with the single TNTs photoanode system. Furthermore, the nitrate by-products generated by the ammonia oxidation were further reduced on the Ni-GF cathode. The large amount of active chlorine and active oxygen generated on the electrode diffused into the bulk, effectively overcoming the mass transfer limitation of direct oxidation. Therefore, the developed TNTs photoanode/Ni-GF cathode system can continuously and efficiently convert ammonia to N₂ without the formation of nitrate/nitrite by-products.

Removal of nitrate from agricultural runoff in biochar electrode based biofilm reactor: Performance and enhancement mechanisms

A biochar electrode based biofilm reactor was developed for advanced removal of nitrate from agricultural runoff. The corn-straw (Zea mays L.) biochar formed at 500 °C has an adsorption capacity of NO₃^--N up to 2.659 mg g^-1. After 45-day start-up phase, the removal efficiency of nitrate reached 93.4% when impressed current was 20 mA, hydraulic retention time was 12 h and chemical oxygen demand/total nitrogen (C/N) ratio was 0.56 without additional carbon source. In comparison, neither electrochemical reduction alone nor microbial denitrification alone could obtain the ideal nitrate removal efficiency. The results implied that bio-electrochemical reduction was the main way of nitrate removal in the biofilm electrode reactor (BER). The denitrification efficiency of 88.9% could still be obtained when C/N = 0. It is because biochar can significantly promote the utilization efficiency of cathode electrons by microorganisms. Thus, biochar is a promising electrode material, which provides a new idea for the optimization of BER.

Enhanced Nitrate Ions Remediation Using Fe0 Nanoparticles from Underground Water: Synthesis, Characterizations, and Performance under Optimizing Conditions

The presence of nitrates in water in large amounts is one of the most dangerous health issues. The greatest risk posed by nitrates is hemoglobin oxidation, which results in Methemoglobin in the human body, resulting in Methemoglobinemia. There are many ways to eliminate nitrates from underground water. One of the most effective and selective methods is using zero-valent iron (ZVI) nanoparticles. ZVI nanoparticles can be easily synthesized by reducing ferric or ferrous ions using sodium borohydride. The prepared ZVI nanoparticles were examined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), electron microscopy (TEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area, and zeta potential. We aim to eliminate or reduce the nitrates in water to be at the acceptable range, according to the world health organization (WHO), of 10.0 mg/L. Nitrate concentration in water after and before treatment is measured using the UV scanning method at 220 nm wavelength for the synthetic contaminated water and electrochemical method for the naturally contaminated water. The conditions were optimized for obtaining an efficient removing process. The removal efficiency reaches about 91% at the optimized conditions.

Selective and Efficient Reduction of Nitrate to Gaseous Nitrogen from Drinking Water Source by UV/Oxalic Acid/Ferric Iron Systems: Effectiveness and Mechanisms

Nitrate (NO3−) reduction in water has been receiving increasing attention in water treatment due to its carcinogenic and endocrine-disrupting properties. This study employs a novel advanced reduction process, the UV/oxalic acid/ferric iron systems (UV/C2O42−/Fe3+ systems), in reducing NO3− due to its high reduction efficiency, excellent selectivity, and low treatment cost. The UV/C2O42−/Fe3+ process reduced NO3− with pseudo-first-order reaction rate constants of 0.0150 ± 0.0013 min−1, minimizing 91.4% of 60 mg/L NO3− and reaching 84.2% of selectivity for gaseous nitrogen after 180 min at pHini. 7.0 and 0.5 mg/L dissolved oxygen (DO). Carbon dioxide radical anion (CO2•−) played a predominant role in reducing NO3−. Gaseous nitrogen and NH4+, as well as CO2, were the main nitrogen- and carbon-containing products, respectively, and reduction pathways were proposed accordingly. A suitable level of oxalic acids (3 mM) and NO3− (60 mg/L) was recommended; increasing initial iron concentrations and UV intensity increased NO3− reduction. Instead, increasing the solution pH decreased the reduction, and 0.5–8.0 mg/L DO negligibly affected the process. Moreover, UV/C2O42−/Fe3+ systems were not retarded by 0.1–10 mM SO42− or Cl− or 0.1–1.0 mM HCO3− but were prohibited by 10 mM HCO3− and 30 mg-C/L humic acids. There was a lower reduction of NO3− in simulated groundwater (72.8%) than deionized water after 180 min at pHini. 7.0 and 0.5 mg/L DO, which meets the drinking water standard (<10 mg/L N-NO3−). Therefore, UV/C2O42−/Fe3+ systems are promising approaches to selectively and efficiently reduce NO3− in drinking water.

A novel biochar electrode for efficient electroreduction of nitrate: Selective and regulation of halogen

A novel biochar electrode Bio-Fe₃O₄/CF used for electroreduction of nitrate was prepared by the hydrothermal synthesis method. The results showed that the growth of spherical Fe₃O₄ on the surface of smooth biochar can significantly increase the nitrate reduction rate. Besides, the presence of Cl and Br in the solution could promote the conversion of NH₄⁺ to N₂, thereby regulating the element nitrogen in the solution. Mechanistic analysis showed that the interconversion of Fe (II) and Fe (III) facilitates the transfer of electrons to nitrate. This study not only provides a biochar electrode material for the efficient removal of nitrate but also simply reveals regulation of halogen in solution, which provides a particular theoretical and data basis for nitrate removal.

Nitrate removal from groundwater using a batch and continuous flow hybrid Fe-electrocoagulation and electrooxidation system

During the last two decades nitrate contaminated groundwater has become an extensive worldwide problem with wide-reaching negative effects on human health and the environment. In this study, a combination of electrocoagulation (EC) and electrooxidation (EO) was studied as a denitrification process to efficiently remove nitrates and ammonium (a by-product produced during EC) from real polluted groundwater. Initially, EC experiments under batch operating mode were performed using iron electrodes at different applied current density values (20-40 mA cm^-2). Nitrate percentage removal of 100 % was recorded, however high ammonium concentrations were performed (4.5-6.5 mg NH₄⁺-Ν L^-1). Therefore, a continuous flow system was examined for the complete removal of both nitrates and EC-generated ammonium cations. The system comprised an EC reactor, a settling tank and an EO reactor. The applied current densities to the EC process were the same as those in the batch experiments, while the volumetric flow rates were 4, 6 and 8 mL min^-1. Regarding the current density of the EO process was kept constant at the value of 75 mA cm^-2. The percentage nitrate removal recorded during the EC process ranged between 52.0 and 100 %, while the NH₄⁺-N concentration at the outlet of the EO reduced significantly (53-100 %) depending on the applied current density and the volumetric flow rate. Also, the dissolved iron concentration in the treated water was always below the legislated limit of 0.2 mg L^-1 (up to 0.027 mg L^-1). These results indicate that the proposed hybrid system is capable of denitrifying real nitrate contaminated groundwater without generating toxic by-products, therefore making the water suitable for human consumption.

Simultaneous Removal of Nitrogen and Refractory Organics from a Biologically Treated Leachate by Pulse Electrochemical Oxidation in a Multi-channel Flow Reactor

Electrochemical oxidation (EO) is often used in the advanced treatment of refractory wastewater. However, in a conventional EO process of direct-current (DC) power supply, oxide layers often form on the anodes, which not only hinder the oxidation reaction on them but also cause higher energy consumption. In this paper, a biologically treated leachate (BTL) of municipal solid waste (MSW) was comparably treated by EO with DC (DC-EO), monopulse (MP-EO), and double pulse (DP-EO) power source models in a home-made multi-channel flow reactor. The effects of process parameters of current density (I _A), superficial liquid velocity (U _L), pulse frequency (f _P), duty ratio (R _D), and so forth on the removal efficiency of chemical oxygen demand (COD) (RE_COD), total organic carbon (TOC) (RE_TOC), and total nitrogen (TN) (RE_TN) were investigated simultaneously. Average energy consumption () and organic composition of the treated effluent of DC-EO and MP-EO were also compared comprehensively, and a new mechanism of MP-EO has been proposed accordingly. Under optimal conditions, 2 L of BTL was treated by MP-EO for 180 min, and the RE_COD, RE_TOC, and RE_TN could reach as high as 80, 30, and 80%, respectively. Compared with DC-EO, the of MP-EO is reduced by 69.27%. Besides, the kinds of organic matter in the treated effluent of MP-EO are reduced from 53 in the BTL to 11, which is much less than in the DC-EO process of 29 kinds. Therefore, the MP-EO process exhibits excellent removal performance of organics and TN and economic prospects in the treatment of refractory organic wastewater.

Synergistic Effect of Co(III) and Co(II) in a 3D Structured Co3O4/Carbon Felt Electrode for Enhanced Electrochemical Nitrate Reduction Reaction

As nitrate contamination causes serious environmental problems, it is necessary to develop stable and efficient electrocatalysts for efficient electrochemical nitrate reduction reaction (ENRR). Here, a nonprecious Co₃O₄/carbon felt (CF) electrode with a 3D structure was prepared by integrating electrodeposition with calcination methods. This 3D structured Co₃O₄/CF electrode exhibits a high-rate constant of 1.18 × 10^-4 s^-1 cm^-2 for the ENRR, surpassing other Co₃O₄ electrodes in previous literature. Moreover, it also has an excellent stability with a decrease of 6.4% after 10 cycles. Density functional theory calculations, electron spin resonance analysis, and cyclic voltammetry were performed to study the mechanism of the ENRR on the Co₃O₄/CF electrode, proving that atomic H* (indirect pathway) plays a prominent role in NO₃^- reduction and clarifying the synergistic effect of Co(III) and Co(II) in the Co(II)-Co(III)-Co(II) redox cycle for the ENRR: Co(III) prefers the adsorption of NO₃^- and Co(II) favors the production of H*. Based on this synergy, a relatively large amounts of Co(II) on the surface of the Co₃O₄/CF electrode (1.3 Co(II)/Co(III) ratio) was maintained by controlling the temperature of calcination to 200 °C with a lower energy barrier of H* formation of 0.46 eV than other ratios, which is beneficial for forming H* and enhancing the performance of the ENRR. Thus, this study suggests that building 3D structure and optimizing Co(II)/Co(III) ratio are important for designing efficient Co₃O₄ electrocatalyst for ENRR.

Review on electrochemical system for landfill leachate treatment: Performance, mechanism, application, shortcoming, and improvement scheme

Landfill leachate is a type of complex organic wastewater, which can easily cause serious negative impacts on the human health and ecological environment if disposed improperly. Electrochemical technology provides an efficient approach to effectively reduce the pollutants in landfill leachate. In this review, the electrochemical standalone processes (electrochemical oxidation, electrochemical reduction, electro-coagulation, electro-Fenton process, three-dimensional electrode process, and ion exchange membrane electrochemical process) and the electrochemical integrated processes (electrochemical-advanced oxidation process (AOP) and biological electrochemical process) for landfill leachate treatment are summarized, which include the performance, mechanism, application, existing problems, and improvement schemes such as cost-effectiveness. The main objective of this review is to help researchers understand the characteristics of electrochemical treatment of landfill leachate and to provide a useful reference for the design of the process and reactor for the harmless treatment of landfill leachate.

Selective removal of nitrate using a novel asymmetric amine based strongly basic anion exchange resin

In this study, a novel asymmetric amine-based strongly basic anion exchange resin SE-1 was synthesized successfully via the reaction of chloromethylated styrene–divinylbenzene copolymer with N, N-dimethyloctylamine. The sorption performance of SE-1 for selective removal of nitrate in aqueous solution was compared to a commercially available nitrate specialty resin, namely Purolite A 520E (A 520E). It was found that the kinetic data could be described better by the pseudo-second-order model, and SE-1 indicated a faster sorption kinetics than A 520E resin. The Langmiur model was more appropriate for explicating the sorption isotherm. Importantly, SE-1 exhibited a greater sorption capacity for nitrate regardless of the absence or presence of competing anions in solutions. The result of column tests reinforced the feasibility of SE-1 for practical application in groundwater treatment.

Fe-exchanged nano-bentonite outperforms Fe3O4 nanoparticles in removing nitrate and bicarbonate from wastewater

Nitrate (NO₃^-) and bicarbonate (HCO₃^-) are harmful for the water quality and can potentially create negative impacts to aquatic organisms, crops and humans. This study deals with the removal of NO₃^- and HCO₃^- from contaminated wastewater using Fe-exchanged nano-bentonite and Fe₃O₄ nanoparticles. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, surface area measurement and particle size analysis revealed that the adsorbents fall under the nano-scale size range with high specific surface area, and Fe was successfully exchanged in the nano-bentonite clay. The kinetics of adsorption was well defined by pseudo-first order and pseudo-second order kinetic models for both NO₃^- and HCO₃^-. The Fe-exchanged nano-bentonite was a better performing adsorbent of the oxyanions than Fe₃O₄ nanoparticles. According to the Sips isothermal model, the Fe-exchanged nano-bentonite exhibited the highest NO₃^- and HCO₃^- adsorption potential of 64.76 mg g^-1 and 9.73 meq g^-1, respectively, while the respective values for Fe₃O₄ nanoparticles were 49.90 mg g^-1 and 3.07 meq g^-1. Thus, inexpensiveness and easy preparation process of Fe-exchanged nano-bentonite make it attractive for NO₃^- and HCO₃^- removal from contaminated wastewater with significant environmental and economic benefits.

Electrochemical removal of nitrate from a Donnan dialysis waste stream

The objective of this work was to investigate electrochemical removal of nitrate from a high salinity waste stream generated by Donnan dialysis. Donnan dialysis for nitrate removal is a promising technique. It produces a distinctive composition of a high salinity waste stream of NaCl or Na₂SO₄ that requires a viable disposal method. The waste stream has the full anionic composition of contaminated groundwater, but the only cation is sodium. Experiments were conducted in a batch system setup. A copper cathode was chosen over brass, aluminum and graphite cathodes. A dimensionally stable anode (DSA), Ti/PbO₂, was selected over a Ti/Pt anode. Electrochemical denitrification of high salinity Donnan dialysis nitrate wastes was successfully achieved, with different behavior exhibited in high salinity NaCl solution than in high salinity Na₂SO₄ solution. NaCl inhibited nitrate removal at high salinities while Na₂SO₄ did not. The maximum removals after 4 h operation in the high salinity wastes were 69 and 87% for the NaCl and Na₂SO₄ solutions respectively.