Combining KMnO4 pre-oxidation and bioaugmented sand filtration to simultaneously treat cyanobacterial bloom lake water and released Mn(II)

The effect of pre-treatments on atrazine removal from source water by microbubble ozonation

Ozone-based advanced oxidation processes (AOPs) have emerged a promising avenue for water treatment, offering effective removal of micropollutants. Recent research underscores the potential of ozone microbubbles to enhance ozone mass transfer during water treatment, particularly when combined with pre-treatment steps. This study aimed to evaluate the efficacy of three different combined processes (chlorine/KMnO4/PAC pre-treatment followed by ozonation) in removing atrazine, a common micropollutant from natural source water. Results revealed that all combined processes achieved higher atrazine removal rates compared to individual pre-treatment or ozonation methods. Notably, the highest atrazine removal rates were observed under alkaline pH conditions, with treatment outcomes influenced by oxidant dose and pH levels. Among the combined processes, chlorine pre-treatment followed by ozonation emerged as the most effective approach, achieving a removal rate of 59.7% that exceeded the sum of individual treatments. However, this treatment efficacy was affected by water quality parameters, particularly the presence of organic matter and elevated ammonia nitrogen concentration (> 0.5 mg/L). This study highlights the potential for utilizing ozone micro/nanobubbles to enhance ozone mass transfer and offers valuable insights for optimizing the combined application of pre-treatment and ozonation strategies for efficient atrazine removal from natural water sources.

Moderate oxidation of algae-laden water: Principals and challenges

The occurrence of seasonal algae blooms represents a huge dilemma for water resource management and has garnered widespread attention. Therefore, finding methods to control algae pollution and improve water quality is urgently needed. Moderate oxidation has emerged as a feasible way of algae-laden water treatment and is an economical and prospective strategy for controlling algae and endogenous and exogenous pollutants. Despite this, a comprehensive understanding of algae-laden water treatment by moderate oxidation, particularly principles and summary of advanced strategies, as well as challenges in moderate oxidation application, is still lacking. This review outlines the properties and characterization of algae-laden water, which serve as a prerequisite for assessing the treatment efficiency of moderate oxidation. Biomass, cell viability, and organic matter are key components to assessing moderate oxidation performance. More importantly, the recent advancements in employing moderate oxidation as a treatment or pretreatment procedure were examined, and the suitability of different techniques was evaluated. Generally, moderate oxidation is more promising for improving the solid-liquid separation process by the reduction of cell surface charge (stability) and removal/degradation of the soluble algae secretions. Furthermore, this review presents an outlook on future research directions aimed at overcoming the challenges encountered by existing moderate oxidation technologies. This comprehensive examination aims to provide new and valuable insights into the moderate oxidation process.

Cyanobacterial blooms in surface waters - Nature-based solutions, cyanotoxins and their biotransformation products

Cyanobacterial blooms are expected to become more frequent and severe in surface water reservoirs due to climate change and ecosystem degradation. It is an emerging challenge that especially countries relying on surface water supplies will face. Nature-based solutions (NBS) like constructed wetlands and biofilters can be used for cyanotoxin remediation. Both technologies are reviewed and critically assessed for different types of water resources. The available information on cyanotoxins (bio)transformation products (TPs) is reviewed to point out the potential research gaps and to disclose the most reliable enzymatic degradation pathways. Knowledge gaps were found, such as information on the performance of the revised NBS in pilot and full scales, the removal processes covering different cyanotoxins (besides the most widely studied microcystin-LR), and the difficulties for real-world implementation of technologies proposed in the literature. Also, most studies focus on bacterial degradation processes while fungi have been completely overlooked. This review also presents an up-to-date overview of the transformation of cyanotoxins, where degradation product data was compiled in a unified library of 22 metabolites for microcystins (MCs), 7 for cylindrospermopsin (CYN) and 10 for nodularin (NOD), most of them reported only in a single study. Major gaps are the lack of environmentally relevant studies with TPs in pilot and full- scale treatment systems, information on TP's toxicity, as well as limited knowledge of environmentally relevant degradation pathways. NBS have the potential to mitigate cyanotoxins in recreational and irrigation waters, enabling the water-energy-food nexus and avoiding the degradability of the ecosystems.

Detoxification and metabolism of glyphosate by a Pseudomonas sp. via biogenic manganese oxidation

Biogenic manganese oxides (BMO) are widely distributed in groundwater and provides promise for adsorbing and oxidizing a wide range of micropollutants, however, the continuous biodegradation and bioavailability of micropollutants via cycle biogenic Mn(II) oxidation remains to be elucidated. In this study, glyphosate was degraded and to serve as the nutrient source by a Pseudomonas sp. QJX-1. The addition of glyphosate will not affect the Mn(II) oxidation function of the strain but will affect its Mn(II) oxidation process and effect. The glyphosate degradation products could further be used as the C, N and P sources for bacterium growth. Analysis of the RNA-seq data suggested that Mn(II) oxidation driven by oxidoreductases for glyphosate degradation. The long-term column experiments using biological Mn(II) cycling to realize continuous detoxification and metabolism of glyphosate, and thus revealed the synergism effects of biological and chemical conversion on toxic micropollutants and continuous metabolism in an aquatic ecosystem.

Control of disinfection byproducts in drinking water treatment plants: Insight into activated carbon filter

The removal efficiencies of disinfection byproducts formation potentials (DBPFPs) and generated DBPs under pre-chlorination condition (pre-generated DBPs) during different drinking water treatment trains in eight full-scale drinking water treatment plants (WTPs) were investigated through field and laboratory studies. Haloacetic acids (HAAs) and haloacetonitriles (HANs) were identified to be two representative DBPs based on cytotoxicity and genotoxicity assessments. The performances of advanced treatment train for HAAs and HANs were better than that of conventional treatment train. However, the efficacy of ozone - biological activated carbon (O₃-BAC) was affected by its service time and position in the water treatment process. In addition, the consumption of free chlorine by activated carbon in old granular activated carbon (GAC) filter was higher than that in new one under pre-chlorination condition, resulting in the increase of HAAs and HANs in the GAC filter effluent. This demonstrated that the organic matter adsorbed on older activated carbon generated more HAAs and HANs during pre-chlorination, which inhibited the adsorption of pre-generated DBPs. The ability of GAC/O₃-BAC to remove HAAs and HANs was consistent with that of protein-like and low molecular weight organic substances, which could predict the performance of GAC and O₃-BAC in treating DBPs.

Trihalomethanes formation enhanced by manganese chlorination and deposition in plastic drinking water pipes

Residual manganese(II) in finished water undergoes further oxidation and deposition in drinking water distribution systems (DWDS), and Mn deposits can function as sites for accumulating organic and inorganic pollutants. This study aims to explore how Mn transformation and deposition affect the formation of disinfection byproducts (DBPs) in chlorinated DWDS, and trihalomethanes (THMs) was selected as a representative DBP. In a 100 μg/L Mn system, regulated THMs (chlorinated/bromated-THMs) increased by over 20% higher than Mn-free system after 150-day operation; when 50 μg/L iodide (I^-) entered pipe systems after 150 days, iodinated THMs (I-THMs) in 100 μg/L Mn system increased by over 30% compared with Mn-free system. These promotions were attributed primarily to the accumulation of biomolecules and organic substances by tight and hard chlorinated Mn deposits. The residence of inactivated cells and the bridging role of surface Mn(III) in Mn deposits increased the quantity of THM precursors in DWDS. Furthermore, the rapid catalytic oxidation of Mn(II) by preformed Mn oxides (MnO_x) inhibited the conversion of free iodine (HOI/OI^-) to iodate, resulting in the generation of more I-THMs. This study provides new insights into the DBP risks caused by Mn in DWDS.

A possible environmental-friendly removal of Microcystis aeruginosa by using pyroligneous acid

Cyanobacteria blooms are crucial environmental issues by threatening both aquatic ecosystem and human health. A biomass by-product with antimicrobial activity, pyroligneous acid (PA) was tested for its suitability for removal of the cyanobacteria Microcystis aeruginosa (M. aeruginosa) in this work. Results show that the removal efficiency could reach up to 90% in the presence of 0.45% of PA and the inhibition to M. aeruginosa growth could extend to at least 40 days. The removal mechanism was studied. Both organic acids and phenols are functional content in M. aeruginosa removal and acetic acid is the most important one. Zeta potential analysis and morphology study show that the damage of cells dominates the flocculation and sedimentation of M. aeruginosa under low PA concentration (<0.7%), and increasing PA (≥0.7%) resulted in a trend of zeta potential to zero, thus removing any "shield" and triggering flocculation. Finally, study on the phenols residual after M. aeruginosa treatment shows that it could be close to 0 in 70 h. Therefore, this work proposes a possible method for world-wide treatment of cyanobacteria bloom and a new way for further utilization of PA.