Heavy metal removal effectiveness, flow direction and speciation variations in the sludge during the biosurfactant-enhanced electrokinetic remediation

Cooperation of rhamnolipid and thermophilic bacteria modifies proteinic structure, microbial community, and metabolic traits for efficient solubilization and acidogenesis of mariculture solid wastes

Anaerobic fermentation combined with thermophilic bacteria (TB) pretreatment is a promising method to realize effective waste management and carbon resource recovery. However, undesirable properties of high-strength mariculture solid wastes (MSW) such as high solids concentration, excessive salinity and poor bioavailability limited the overall solubilization and acidogenic efficiency. This study innovatively introduced rhamnolipid (RL) to alleviate this adverse effect, and unveiled its cooperation with TB on enhancing organic matter dissolution and volatile fatty acids (VFAs) production. The results showed that VFAs yield from pretreated MSW was improved by 9.4-15.1 folds with enriched acetate (81.4%-94.4%) in the TB+RL groups. The co-pretreatment of RL and TB disintegrated substrate structure for efficient release of electron shuttles and biodegradable organics. This was because introducing RL reconstructed solid-liquid interfacial charge and molecular arrangement, improved thermophilic enzyme activity, and reduced apoptosis and necrosis cells of TB. Substrate bioavailability was further improved with proteinic structure shifted from α-helix and β-sheet to random coil and aggregated strands, and amide II and carboxyl groups interacted with RL molecules. These changes induced the selective enrichment of hydrolytic and acidogenic bacteria, and the upregulated expression of encoding genes responsible for transmembrane transport, protein hydrolysis, carbohydrate metabolism and acetate biosynthesis. This study provides a new strategy to overcome the bottlenecks of acidogenesis from high-strengthen organic wastes and deciphers the underlying mechanism.

Electrokinetic Remediation of Cu- and Zn-Contaminated Soft Clay with Electrolytes Situated above Soil Surfaces

Electrokinetic remediation (EKR) has shown great potential for the remediation of in situ contaminated soils. For heavy metal-contaminated soft clay with high moisture content and low permeability, an electrokinetic remediation method with electrolytes placed above the ground surface is used to avoid issues such as electrolyte leakage and secondary contamination that may arise from directly injecting electrolytes into the soil. In this context, using this novel experimental device, a set of citric acid (CA)-enhanced EKR tests were conducted to investigate the optimal design parameters for Cu- and Zn-contaminated soft clay. The average removal rates of heavy metals Cu and Zn in these tests were in the range of 27.9-85.5% and 63.9-83.5%, respectively. The results indicate that the Zn removal was efficient. This was determined by the migration intensity of the electro-osmotic flow, particularly the volume reduction of the anolyte. The main factors affecting the Cu removal efficiency in sequence were the effective electric potential of the contaminated soft clay and the electrolyte concentration. Designing experimental parameters based on these parameters will help remove Cu and Zn. Moreover, the shear strength of the contaminated soil was improved; however, the degree of improvement was limited. Low-concentration CA can effectively control the contact resistance between the anode and soil, the contact resistance between the cathode and soil, and the soil resistance by increasing the amount of electrolyte and the contact area between the electrolyte and soil.

Bio-chelate assisted leaching for enhanced heavy metal remediation in municipal solid waste compost

Municipal solid waste compost, the circular economy's closed-loop product often contains excessive amounts of toxic heavy metals, leading to market rejection and disposal as waste material. To address this issue, the study develops a novel approach based on: (i) utilizing plant-based biodegradable chelating agent, L-glutamic acid, N,N-diacetic acid (GLDA) to remediate heavy metals from contaminated MSW compost, (ii) comparative assessment of GLDA removal efficiency at optimal conditions with conventional nonbiodegradable chelator EDTA, and (iii) enhanced pre- and post-leaching to evaluate the mobility, toxicity, and bioavailability of heavy metals. The impact of treatment variables, such as GLDA concentration, pH, and retention time, on the removal of heavy metals was investigated. The process was optimized using response surface methodology to achieve the highest removal effectiveness. The findings indicated that under optimal conditions (GLDA concentration of 150 mM, pH of 2.9, retention time for 120 min), the maximum removal efficiencies were as follows: Cd-90.32%, Cu-81.96%, Pb-91.62%, and Zn-80.34%. This process followed a pseudo-second-order kinetic equation. Following GLDA-assisted leaching, the geochemical fractions were studied and the distribution highlighted Cd, Cu, and Pb's potential remobilization in exchangeable fractions, while Zn displayed integration with the compost matrix. GLDA-assisted leaching and subsequent fractions illustrated transformation and stability. Therefore, this process could be a sustainable alternative for industrial applications (agricultural fertilizers and bioenergy) and social benefits (waste reduction, urban landscaping, and carbon sequestration) as it has controlled environmental footprints. Hence, the proposed remediation strategy, chemically assisted leaching, could be a practical option for extracting heavy metals from MSW compost, thereby boosting circular economy.

Migration and morphological transformation patterns of heavy metals on sludge cells and extracellular polymeric substances (EPS) under the influence of different treatments

The impediment of sludge resource utilization stems from the presence of heavy metals within the sludge matrix. To optimize heavy metal removal techniques from undried sludge, it is essential to study the distribution of heavy metals in the sludge flocs structure and the changes in morphology in the sludge cells after different treatments. In this study, the sludge was subjected to chemical treatments using citric acid (CA), EDTA, and saponin, as well as electrokinetic treatment at 2 V/cm. The distribution and migration of Cu, Ni, and Zn in sludge flocs after various treatment methods were analyzed. The heavy metals were found to migrate from intracellular to extracellular polymeric substances (EPS) without causing extensive sludge cell lysis. They gradually diffused outward with the dispersion of the EPS layer. The migration efficiency of the three heavy metals in the sludge flocs was Zn, Ni, and Cu. This was mainly related to the initial distribution and morphology of the heavy metals. Under the influence of chemicals and an electric field, the acid-soluble and reducible heavy metals in the cells partially migrated to the EPS, while the stable heavy metals transformed into an unstable state. Furthermore, the order of chemical reagents in terms of their effect on the migration efficiency of heavy metals was CA > EDTA > Saponin, owing to the varying binding strengths of heavy metals and their impact on the degree of loosening of the EPS. Especially after CA treatment a greater proportion of Cu, Ni, and Zn were transferred from the cells to the EPS. The acidification effect near the anode during electrokinetic treatment intensifies the migration of heavy metals. This study provides basic research for subsequent engineering optimization aimed at removing heavy metals from sludge.

Development of an environmentally sustainable technique to minimize the sludge production in the textile effluent sector through an electrokinetic (EK) coupled with electrooxidation (EO) approach

This study presents an environmentally sustainable method for minimizing sludge production in the textile effluent sector through the combined application of electrokinetic (EK) and electrooxidation (EO) processes. AAS and XRF analyses reveal that utilizing acidic electrolytes in the EK method successfully eliminates heavy metals (Cu, Mn, Zn, and Cr) from sludge, demonstrating superior efficiency compared to alkaline conditions. In addition, the total removal efficiency of COD contents was calculated following the order of EK-3 (60%), EK-1 (51%) and EK-2 (34%). Notably, EK-3, leveraging pH gradient fluctuations induced by anolyte in the catholyte reservoir, outperforms other EK systems in removing COD from sludge. The EK process is complemented by the EO process, leading to further degradation of dye and other organic components through the electrochemical generation of hypochlorite (940 ppm). At an alkaline pH of 10.0, the color and COD removal were effectively achieved at 98 and 70% in EO treatment, compared to other mediums. In addition, GC-MS identified N-derivative residues at the end of the EO. This study demonstrates an integrated approach that effectively eliminates heavy metals and COD from textile sludge, combining EK with EO techniques.

Technological and economic analysis of electrokinetic remediation of contaminated soil: A global perspective and its application in Indian scenario

Globally million hectares of land annually is getting contaminated by heavy metalloids like As, Cd, Cr, Hg, Pb, Co, Cu, Ni, Zn, and Se, with current concentrations in soil above geo-baseline or regulatory standards. The heavy metals are highly toxic, mobile, and persistent and hence require immediate and effective mitigation. There are many available remediation techniques like surface capping, encapsulation, landfilling, soil flushing, soil washing, electrokinetic extraction, stabilization, solidification, vitrification, phytoremediation, and bioremediation which have been evolved to clean up heavy metal-contaminated sites. Nevertheless, all of the technologies have some applicability and limitations making the soil remediation initiative unsustainable. Among the available technologies, electrokinetic remediation (EKR) has been comparatively recognized to mitigate contaminated sites via both in-situ and ex-situ approaches due to its efficiency, suitability for use in low permeability soil, and requirement of low potential gradient. The work critically analyzes the EKR concerning techno, economic, and sustainability aspect for evaluating its application on various substrates and environmental conditions. The current soil contamination status in India is presented and the application of EKR for the heavy metal remediation from soil has been evaluated. The present work summaries a comprehensive and exhaustive review on EKR technology proving its effectiveness for a country like India where the huge amount of waste generated could not be treated due to lack of infrastructure, technology, and economic constraints.

Microbial Biosurfactant: Candida bombicola as a Potential Remediator of Environments Contaminated by Heavy Metals

Industrial interest in surfactants of microbial origin has intensified recently due to the characteristics of these compounds, such as biodegradability and reduced toxicity, and their efficiency in removing heavy metals and hydrophobic organic compounds from soils and waters. The aim of this study was to produce a biosurfactant using Candida bombicola URM 3712 in a low-cost medium containing 5.0% molasses, 3.0% corn steep liquor and 2.5% residual frying oil for 144 h at 200 rmp. Measurements of engine oil tension and emulsification were made under extreme conditions of temperature (0 °C, 5 °C, 70 °C, 100 °C and 120 °C), pH (2-12) and NaCl concentrations (2-12), demonstrating the stability of the biosurfactant. The isolated biosurfactant was characterized as an anionic molecule with the ability to reduce the surface tension of water from 72 to 29 mN/m, with a critical micellar concentration of 0.5%. The biosurfactant had no toxic effect on vegetable seeds or on Eisenia fetida as a bioindicator. Applications in the removal of heavy metals from contaminated soils under dynamic conditions demonstrated the potential of the crude and isolated biosurfactant in the removal of Fe, Zn and Pb with percentages between 70 and 88%, with the highest removal of Pb being 48%. The highest percentage of removal was obtained using the cell-free metabolic liquid, which was able to remove 48, 71 and 88% of lead, zinc and iron from the soil, respectively. Tests in packed columns also confirmed the biosurfactant's ability to remove Fe, Zn and Pb between 40 and 65%. The removal kinetics demonstrated an increasing percentage, reaching removal of 50, 70 and 85% for Pb, Zn and Fe, respectively, reaching a greater removal efficiency at the end of 24 h. The biosurfactant was also able to significantly reduce the electrical conductivity of solutions containing heavy metals. The biosurfactant produced by Candida bombicola has potential as an adjuvant in industrial processes for remediating soils and effluents polluted by inorganic contaminants.

Effects of complex sulphur substrates on sludge bioleaching to improve heavy metal removal and microbial community diversity

In this study, H2S was used as a partial replacement nutrient substrate for sludge bioleaching. The effects of different combinations of H2S/sludge load and monomeric sulphur on heavy metal removal and microbial communities were investigated. Changes in pH, oxidation-reduction potential (ORP), SO42- concentration, heavy metal removal, and the content of heavy metal states during bioleaching were investigated, and community diversity analysis was performed. Daily introduction of H2S three times (at an interval of 8 h) at a gas flow rate of 2 ml/min and an H2S/sludge load of 15 ml/L with 5 g/L FeSO4·7H2O and 2 g/L monomeric sulphur as a nutrient substrate significantly accelerated both the bioleaching process and the pH drop in the sludge system, promoted the production of SO42-, and maintained a higher redox potential. The combination of H2S and monomeric sulphur had a significant effect on the leaching of heavy metals. Compared with the experimental group containing only H2S or monomeric sulphur, the removal rates of Zn, Ni, Pb, and Cr increased by 4.63%/13.8%, 8.5%/20.07%, 3.84%/9.5%, and 4.24%/8.02% respectively, while promoting the transformation of various heavy metal states to labile states, improving heavy metal stability, and reducing sludge ecotoxicity. High-throughput sequencing analysis showed that introducing the H2S gaseous matrix accelerated the decreasing trend of species number, bacterial abundance, and community diversity in the sludge system, promoting Proteobacteria as the dominant phylum, Acidithiobacillus, Metallibacterium, and Thiomonas as the dominant genera, and improving the bioleaching treatment effect.

Electrokinetic Remediation of Zn-Polluted Soft Clay Using a Novel Electrolyte Chamber Configuration

This study investigated a novel electrolyte chamber configuration for heavy-metal-contaminated fine-grained soil to reduce the leakage of electrolyte solution and alleviate secondary pollution, finally promoting the electrokinetic remediation (EKR) potential to be scaled up for application. Experiments were conducted on clay spiked with Zn to investigate the feasibility of the novel EKR configuration and the effect of different electrolyte compositions on the electrokinetic remedial efficiency. The results show that the electrolyte chamber situated above the soil surface is promising for the remediation of Zn-contaminated soft clay. Using 0.2 M citric acid as the anolytes and catholytes was an excellent choice for pH control in the soil and the electrolytes. Through this, the removal efficiency in different soil sections was relatively uniform and more than 90% of the initial Zn was removed. The supplementing of electrolytes resulted in the water content in the soil being distributed evenly and finally sustained at approximately 43%. Consequently, this study proved that the novel EKR configuration is suitable for fine-grained soil contaminated with Zn.

Sustainable production of biosurfactants via valorisation of industrial wastes as alternate feedstocks

Globally, the rapid increase in the human population has given rise to a variety of industries, which have produced a variety of wastes. Due to their detrimental effects on both human and environmental health, pollutants from industry have taken centre stage among the various types of waste produced. The amount of waste produced has therefore increased the demand for effective waste management. In order to create valuable chemicals for sustainable waste management, trash must be viewed as valuable addition. One of the most environmentally beneficial and sustainable choices is to use garbage to make biosurfactants. The utilization of waste in the production of biosurfactant provides lower processing costs, higher availability of feedstock and environmental friendly product along with its characteristics. The current review focuses on the use of industrial wastes in the creation of sustainable biosurfactants and discusses how biosurfactants are categorized. Waste generation in the fruit industry, agro-based industries, as well as sugar-industry and dairy-based industries is documented. Each waste and wastewater are listed along with its benefits and drawbacks. This review places a strong emphasis on waste management, which has important implications for the bioeconomy. It also offers the most recent scientific literature on industrial waste, including information on the role of renewable feedstock for the production of biosurfactants, as well as the difficulties and unmet research needs in this area.

A comprehensive study on microbial-surfactants from bioproduction scale-up toward electrokinetics remediation of environmental pollutants: Challenges and perspectives

Currently, researchers have focused on electrokinetic (EK) bioremediation due to its potential to remove a wide-range of pollutants. Further, to improve their performance, synthetic surfactants are employed as effective additives because of their excellent solubility and mobility. Synthetic surfactants have an excessive position in industries since they are well-established, cheap, and easily available. Nevertheless, these surfactants have adverse environmental effects and could be detrimental to aquatic and terrestrial life. Owing to social and environmental awareness, there is a rising demand for bio-based surfactants in the global market, from environmental sustainability to public health, because of their excellent surface and interfacial activity, higher and stable emulsifying property, biodegradability, non- or low toxicity, better selectivity and specificity at extreme environmental conditions. Unfortunately, challenges to biosurfactants, like expensive raw materials, low yields, and purification processes, hinder their applicability to large-scale. To date, extensive research has already been conducted for production scale-up using multidisciplinary approaches. However, it is still essential to research and develop high-yielding bacteria for bioproduction through traditional and biotechnological advances to reduce production costs. Herein, this review evaluates the recent progress made on microbial-surfactants for bioproduction scale-up and provides detailed information on traditional and advanced genetic engineering approaches for cost-effective bioproduction. Furthermore, this study emphasized the role of electrokinetic (EK) bioremediation and discussed the application of BioS-mediated EK for various pollutants remediation.

Agent-assisted electrokinetic treatment of sewage sludge: Heavy metal removal effectiveness and nutrient content characteristics

Sewage sludge (SS) is rich in nutrient elements such as phosphorus (P), nitrogen (N), and potassium (K), and therefore a candidate material for use in agriculture. But high content of heavy metals (HMs) can be a major obstacle to its further utilization. Therefore, an appropriate HM removal technology is required before its land application. In this study, an innovative biodegradable agent (citric acid, FeCl₃, ammonium hydroxide, tetrasodium iminodisuccinate (IDS), and tea saponin) assisted electrokinetic treatment (EK) was performed to investigate the HM removal efficiency (R_HMs) and nutrient transportation. Citric acid, IDS, and FeCl₃-assisted EK showed a preferable average R_HMs (R_ave) reduction of 52.74-59.23%, with low energy consumption. After treatment, the content of Hg (0.51 mg kg^-1), Ni (13.23 mg kg^-1), and Pb (26.45 mg kg^-1) elements met the criteria of national risk control standard, in all cases. Following the treatment, most HMs in SS had a reduced potential to be absorbed by plants or be leached into water systems. Risk assessment indicated that the Geoaccumulation index (I_geo) value of HMs has decreased by 0.28-2.40, and the risk of Pb (I_geo=-0.74) reduced to unpolluted potential. Meanwhile, no excessive nutrient loss in SS occurred as a result of the treatment, on the contrary, there was a slight increase in P content (18.17 mg g^-1). These results indicate that agent-assisted EK treatment could be an environmentally-friendly method for R_HMs and nutrient element recovery from SS, opening new opportunities for sustainable SS recycling and its inclusion into circular economy concepts.

The combination of aerobic digestion and bioleaching for heavy metal removal from excess sludge

In this study, bioleaching is employed for removing heavy metals from excess sludge generated during municipal wastewater treatment. To avoid organic matter impact on bioleaching, aerobic digestion was performed as pretreatment of the bioleaching or accompanied with the bioleaching. The results showed that the leaching amounts of heavy metals from the process of aerobic digestion accompanied with bioleaching was 2.3 times more than that of the process of aerobic digestion followed by bioleaching. The stable-state proportions of Zn, Cu, Ni and Mn increased by 83%, 94%, 96% and 91%, respectively, in the process of aerobic digestion accompanied with bioleaching, and moreover, the reduction rate of MLSS increased by 22.7%. Although the content of ammonia nitrogen and total phosphorus in sludge decreased after bioleaching treatment, they were still much higher than the soil background value. It indicates that the treated sludge still has agricultural value. High throughput sequencing analysis showed that the relative abundance of acid-producing bacteria (Romboutsia, Clostridium, Tricibacter, and Intestinibacter) significantly increased from 0% to 28.6%, 6.9%, 3.9%, and 2.4%. The enrichment of these acidogenic bacteria was the main reason for the pH decrease, which was conducive to the removal of heavy metals from sludge.

Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils

Heavy metal toxicity has become a pressing ecological problem that affects the ecosystems through bioaccumulation, representing a serious public health hazard. Many conventional strategies have been developed and applied to decontaminate and restore metal-contaminated areas. However, these conventional approaches are not very suitable and environmentally safe for heavy metal remediation because of their high operational costs, high energy requirements, post-waste disposal problems, and secondary pollutant generation. Thus, biosurfactant-based bioremediation of heavy metals is a sustainable and promising approach because of its biodegradation capability, economic effectiveness, and ecofriendly nature. Pseudomonas sp., Bacillus sp., Citrobacter freundii, and Candida tropicalis have been isolated as potential sources of biosurfactants and produce compounds such as surfactin, rhamnolipids, and sophorolipids. Owing to the severity of heavy metal pollution in certain parts of the environment, biosurfactants have garnered great interest and attention as an emerging multi-functional technology of the new century for successful removal of heavy metal pollutants. The present study describes the role of biosurfactants in the bioremediation of heavy metals from contaminated environments. Moreover, the interaction mechanism underlying biosurfactant-metal complexation and metal remediation are discussed. Based on the review of the literature, further research is warranted to elucidate the mechanistic roles and explore the structural characterization and gene regulation of biosurfactants to improve their productivity and expand their applicability in bioremediation.

Seeking faster, alternative methods for glycolipid biosurfactant characterization and purification

Biosurfactants have been investigated as potential alternatives for synthetic surfactants in several areas, for example, in environmental and pharmaceutical fields. In that regard, extensive research has been carried out with sophorolipids and rhamnolipids that also present various biological properties with therapeutic significance. These biosurfactants are obtained as complex mixtures of slightly different molecules, and thus when studying these microbial glycolipids, the ability to identify and purify the produced compounds is of extreme importance. This study aimed to develop improved methodologies for the identification, separation, and purification of sophorolipids and rhamnolipids. Therefore, an ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was modified to ensure faster characterization of both sophorolipids and rhamnolipids, enabling the identification and fragmentation pattern description of 10 and 13 congeners, respectively. The separation and purification of these biosurfactants was achieved with novel reversed-phase solid-phase extraction methods guaranteeing the isolation of different glycolipids, including those considered for their significant biological activity (e.g. antimicrobial, anticancer). It was possible to isolate sophorolipids and rhamnolipids with purity of 94% and 99%, respectively. The methods presented herein can be easily implemented and are expected to make purification of these biosurfactants easier, facilitating the study of their individual properties in further works.

Organic farming: Does it contribute to contaminant-free produce and ensure food safety?

Organic farming for higher ecological and human health benefits has been adopted in about 186 countries, covering a total area of 71.5 Mha worldwide. Because of the associated practices, the flows of several environmental pollutants into the organic products threaten food safety and human health. The contaminants that occur at higher concentrations in organic produce include persistent organic pollutants (61.3-436.9 ng g^-1 lamb meat, and 0.28 pg g^-1-2.75 ng g^-1 bovine meat), heavy metals (0.5-33.0 mg kg^-1 lettuce), organochlorine pesticides (11-199 μg g^-1 carrots), cyclodienes, hexachlorocyclohexanes, hexabromocyclododecane (2-3 times higher than in conventionally produced porcine meat), hexachlorobenzene (1.38-14.49 ng g^-1 fat in milk), and non-brominated flame retardants (1.3-3.2 times higher than in conventional produce of greenhouse-grown tomato and cucumber). Moreover, some pollutants like per- and polyfluoroalkyl substances with a longer half-life (1.50-9.10 yrs) are reported to occur in several organic products. In fact, several legacy persistent organic pollutants are known for their significant trophic magnification in an urban terrestrial ecosystem. In addition, many plant functionalities are adversely affected in organic farming. Therefore, the long-term usage of organic products containing such pollutants poses a significant threat to human health. The major limitation in organic livestock production is the severe shortage of organic feed. Several variable standards and technical regulations set by the government and private agencies are the major obstacles in the global marketing of organic products. The present review critically addresses the impact of organic farming on hidden risks due to the use of composts as the amendment resources that enhance the phytoaccumulation and trophic transfer of pollutants, the functional diversity of the ecosystems, and poor harmonization among the policies and regulations in different countries for organic farming. The future directions of research have been suggested to mitigate unintended flows of pollutants into the organic products.

Oyster Shell Powder, Zeolite and Red Mud as Binders for Immobilising Toxic Metals in Fine Granular Contaminated Soils (from Industrial Zones in South Korea)

Low-cost absorbent materials have elicited the attention of researchers as binders for the stabilisation/solidification technique. As, there is a no comprehensive study, the authors of this paper investigated the performance of Oyster shell powder (OS), zeolite (Z), and red mud (RM) in stabilising heavy metals in three types of heavy metal-contaminated soils by using toxicity characteristic leaching procedure (TCLP). Samples were collected from surroundings of an abandoned metal mine site and from military service zone. Furthermore, a Pb-contaminated soil was artificially prepared to evaluate each binder (100× regulatory level for Pb). OS bound approximately 82% of Pb and 78% of Cu in real cases scenario. While Z was highly effective in stabilizing Pb in highly polluted artificial soil (>50% of Pb) at lower dosages than OS and RM, it was not effective in stabilising those metals in the soils obtained from the contaminated sites. RM did not perform consistently stabilising toxic metals in soils from contaminated sites, but it demonstrated a remarkable Pb-immobilisation under dosages over than 5% in the artificial soil. Further, authors observed that OS removal efficiency reached up to 94% after 10 days. The results suggest that OS is the best low-cost adsorbent material to stabilize soils contaminated with toxic metals considered in the study.

Coupled with EDDS and approaching anode technique enhanced electrokinetic remediation removal heavy metal from sludge

In this work, the novel technology was used to remove heavy metal from sludge. The coupled with biodegradable ethylenediamine disuccinic acid (EDDS) and approaching anode electrokinetic (AA-EK) technique was used to enhance heavy metal removing from sludge. Electric current, sludge and electrolyte characteristics, heavy metal removal efficiency and residual content distribution, and heavy metal fractions percentage of variation were evaluated during the electrokinetic remediation process. Results demonstrated that the coupled with EDDS and AA-EK technique obtain a predominant heavy metal removal efficiency, and promote electric current increasing during the enhanced electrokinetic remediation process. The catholyte electrical conductivity was higher than the anolyte, and electrical conductivity of near the cathode sludge achieved a higher value than anode sludge during the coupled with EDDS and AA-EK remediation process. AA-EK technique can produce a great number of H⁺, which caused the sludge acidification and pH decrease. Cu, Zn, Cr, Pb, Ni and Mn obtain the highest extraction efficiency after the coupled with EDDS and AA-EK remediation, which were 52.2 ± 2.57%, 56.8 ± 3.62%, 60.4 ± 3.62%, 47.2 ± 2.35%, 53.0 ± 3.48%, 54.2 ± 3.43%, respectively. Also, heavy metal fractions analysis demonstrated that the oxidizable fraction percentage decreased slowly after the coupled with EDDS and AA-EK remediation.