Enhanced sonophotocatalytic degradation of bisphenol A using bimetal sulfide-intercalated MXenes, 2D/2D nanocomposite

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

Advances in MXene-based technologies for the remediation of toxic phenols: A comprehensive review

The pressing global issue of organic pollutants, particularly phenolic compounds derived primarily from industrial wastes, poses a significant threat to the environment. Although progress has been made in the development of low-cost materials for phenolic compound removal, their effectiveness remains limited. Thus, there is an urgent need for novel technologies to comprehensively address this issue. In this context, MXenes, known for their exceptional physicochemical properties, have emerged as highly promising candidates for the remediation of phenolic pollutants. This review aims to provide a comprehensive and critical evaluation of MXene-based technologies for the removal of phenolic pollutants, focusing on the following key aspects: (1) The classification and categorization of phenolic pollutants, highlighting their adverse environmental impacts, and emphasizing the crucial need for their removal. (2) An in-depth discussion on the synthesis methods and properties of MXene-based composites, emphasizing their suitability for environmental remediation. (3) A detailed analysis of MXene-based adsorption, catalysis, photocatalysis, and hybrid processes, showcasing current advancements in MXene modification and functionalization to enhance removal efficiency. (4) A thorough examination of the removal mechanisms and stability of MXene-based technologies, elucidating their operating conditions and stability in pollutant removal scenarios. (5) Finally, this review concludes by outlining future challenges and opportunities for MXene-based technologies in water treatment, facilitating their potential applications. This comprehensive review provides valuable insights and innovative ideas for the development of versatile MXene-based technologies tailored to combat water pollution effectively.

Construction of surface-rich MoS2 nanoflowers decorated on 2D layered MXene nanohybrid heterostructure for highly efficient and rapid degradation of oxytetracycline

In this study, we successfully developed a hybrid architecture referred to as MoS2@MX, involving the integration of MoS2 layered onto MXene using a straightforward co-precipitation method. This innovative hybrid photocatalyst exhibited remarkable efficiency in removing oxytetracycline (OTC) molecules from aqueous solutions under visible-light irradiation. During the photocatalytic process, both MoS2 and MX played distinct yet complementary roles. MoS2 facilitated efficient electron transfer, while MX contributed to the generation of radicals. This unique collaboration resulted in a noteworthy 99 % oxidation efficiency for OTC degradation within a brief 60 min of visible light exposure in an aqueous environment. The radicals 1O2 and •OH were identified as the principal drivers behind OTC degradation, underscoring the vital role of the hybrid material. Mechanistically, the degradation of OTC involved several key steps, including C-H bond cleavage, de-carboxylation, C-N bond oxidation, and de-chlorination. Importantly, the MoS2@MX hybrid composite demonstrated remarkable stability, maintaining a noteworthy photocatalytic efficiency of 89 % for targeted OTC removal after undergoing five consecutive cycles. In conclusion, this study emphasizes the potential of the MoS2@MX hybrid material as an effective agent for degrading organic OTC compounds within aquatic environments. The hybrid's multifaceted roles and exceptional performance suggest promising applications in sustainable water treatment.

Recent strategies, progress, and prospects of two-dimensional metal carbides (MXenes) materials in wastewater purification: A review

With the rapid development of industrialization, water pollution directly leads to the serious shortage of fresh water. As reported by the World Water Council, nearly 3.8 billion people will face water scarcity by 2030. Therefore, developing advanced nanomaterials to realize wastewater purification is a major challenge. Two-dimensional (2D) transition metal carbides (MXenes), as the emerging 2D layered nanomaterials, have been investigated for the applications of water purification treatment since first reported in 2011. Over 40 different MXenes have been developed for environmental remediation, and dozens more structures and properties are theoretically predicted. Here, we review the advances from the aspects of synthesis strategies for MXenes, purification mechanism, and their applications in wastewater treatment processes. The major points are 1) the synthesis and modification approaches for MXenes such as multi-layered stacked MXenes and delaminated MXenes 2) a discussion of current water remediation over MXene-based materials, 3) a brief introduction for removal behaviors and deep interaction mechanisms, 4) optimization strategies and key points for boosting the remediation performance of MXenes.

Reasonable decoration of CuO/Cd0.5Zn0.5S nanoparticles onto flower-like Bi5O7I as boosted step-scheme photocatalyst for reinforced photodecomposition of bisphenol A and Cr(VI) reduction in wastewater

Building S-scheme heterostructures is a sophisticated approach to receiving outstanding catalysts for environmental detoxification. Herein, ternary CuO/Cd0.5Zn0.5S/Bi5O7I (CO/CZS/BOI) nanocomposites were constructed by in-situ decorating of CuO and Cd0.5Zn0.5S nanoparticles onto Bi5O7I micro-sphere in a facile route. The optimal CO/CZS/BOI reflected reinforced bisphenol A (BPA) photo-oxidation (95% in 70 min) and Cr(VI) photo-reduction (96.6 in 60 min) under visible light. Besides, CO/CZS/BOI afforded 5.10 (4.44), 4.42 (3.71), and 6.60 (5.27) fold reinforcement in the BPA (Cr(VI)) photo-reaction rate compared to BOI, CZS, and CO, respectively. This behavior was linked to the development of S-scheme mechanisms resulting from the co-effects of BOI, CZS, and CO in retaining the optimum redox capacity, facilitating the dissolution of photo-carriers, increasing reactive sites, and strengthening the visible-light response. The parameters influencing the catalytic reaction of CO/CZS/BOI, such as light intensity, catalyst dosage, and pH, were deeply studied. The quenching tests declared the prominent roles •O2- and •OH in the breaking down of BPA and the participation of electrons and •O2- in the photocatalytic conversion of Cr(VI). The cyclic tests verified the robust photostability of CO/CZS/BOI, which is associated with the reintegration process between the free h+ coming from CZS and the photo-induced e- of CO and BOI in the S-scheme system. In conclusion, the present study provides a profound understanding of the photo-reaction mechanism of CO/CZS/BOI and introduces a novel concept for constructing a superior dual-Scheme system for efficient wastewater detoxification.

Photodegradation of rhodamine-B in aqueous environment using visible-active gC3N4@CS-MoS2 nanocomposite

Rapid industrial expansion leads to environmental pollution especially in an aqueous environment. Photocatalytic degradation is one of the most efficient and environmentally friendly techniques used to treat industrial pollution due to its complete degradation capability of a variety of water contaminants to their non-toxic state. Graphitic carbon nitride (gC3N4) and molybdenum disulfide (MoS2) provide efficient dye degradation, but MoS2 has few disadvantages. Hence, chitosan (CS) supported gC3N4-MoS2 hybrid nanocomposite was developed in this study to reduce these issues by accelerating the degradation of dye molecules such as rhodamine-B under visible light. The prepared gC3N4@CS-MoS2 hybrid nanocomposite was thoroughly characterized using various analytical tools including FTIR, XRD, SEM, EDX, XPS, UV-Visible, and PL spectra. Several influencing parameters such as irradiation time, initial pH, dosage, and initial dye concentration were optimized by batch mode. The photodegradation of rhodamine-B could be induced by the heterogeneous gC3N4@CS-MoS2-water hybrid nanocomposite. The narrow band gap of gC3N4@CS-MoS2 (1.80 eV) makes it suitable for effective degradation of rhodamine-B due to more active in the visible region and attained its highest degradation efficiency of 99% after 40 min at pH 8 with minimum dosage of 60 mg. The possible degradation mechanism was tentatively proposed for rhodamine-B dye molecules from aqueous environment. The present work shows a novel photocatalyst for the purification and detoxification of dye molecules as well as other water contaminants found in polluted wastewater.

Tuning of interfacial HGO@CLS nanohybrid S-scheme heterojunction with improved carrier separation and photocatalytic activity towards RhB degradation

Herein, we premeditated and invented the innovative hybrid photocatalyst 2D/2D CuLa2S4 on holey graphene oxide (HGO) (HGO@CLS) via the hydrothermal method. Electrochemical techniques demonstrate the action of HGO in the HGO@CLS photocatalyst as an effective medium for electron transfer. Combining bimetallic sulfides on porous HGO synergistically provides a higher negative conduction band edge (-0.141 V), greater photo response (10.8 mA/cm2), smaller charge transfer resistance (Rct = 1.79Ω), and lower photoluminescence (PL) spectral intensity. According to our research, the catalytic recitals are sped up when HGO is assimilated into CLS photocatalyst hetero-junction. Additionally, it lowers the reassimilation rate due to the combined mesh nanostructures and functionality of CLS and HGO. UV-Vis DRS, Mott-Schottky, PL, and Electrochemical impedance spectra (EIS) results manifested that the CuLa2S4/HGO makes the spatial separation competent and transference of charge carriers due to the photon irradiation and exhibits superior photocatalytic ability. Electron spin resonance (ESR) analysis confirmed that •OH and h+ were the predominant radical species responsible for Rhodamine B(RhB) degradation. Moreover, conceivable degradation ways of RhB were deduced according to the identified intermediates which are responsible for the degradation of recalcitrant products. To check the stability of the photocatalyst, revival tests were also carried out. Similarly, the oxidative byproducts created in the deprivation courses were looked at, and a thorough explanation for the mechanism of degradation was given.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

Advances in two-dimensional engineered nanomaterials applications for the agro- and food-industries

Two-dimensional nanomaterials, such as graphene, transition metal dichalcogenides, MXenes, and other layered compounds, are the subject of intense theoretical and experimental research for applications in a wide range of advanced technological solutions, given their outstanding physical, chemical, and mechanical properties. In the context of food science and technology, their contributions are starting to appear, based on the advantages that two-dimensional nanostructures offer to agricultural- and food-related key topics, such as sustainable water use, nano-agrochemicals, novel nanosensing devices, and smart packaging technologies. These application categories facilitate the grasping of the current and potential uses of such advanced nanomaterials in the field, backed by their advantageous physical, chemical, and structural properties. Developments for water cleaning and reuse, efficient nanofertilizers and pesticides, ultrasensitive sensors for food contamination, and intelligent nanoelectronic disposable food packages are among the most promising application examples reviewed here and demonstrate the tremendous impact that further developments would have in the area as the fundamental and applied research of two-dimensional nanostructures continues. We expect this work will contribute to a better understanding of the promising characteristics of two-dimensional nanomaterials that could be used for the design of novel and feasible solutions in the agriculture and food areas. © 2023 Society of Chemical Industry.

Rapid growth of MXene-based membranes for sustainable environmental pollution remediation

Water consumption has grown in recent years due to rising urbanization and industry. As a result, global water stocks are steadily depleting. As a result, it is critical to seek strategies for removing harmful elements from wastewater once it has been cleaned. In recent years, many studies have been conducted to develop new materials and innovative pathways for water purification and environmental remediation. Due to low energy consumption, low operating cost, and integrated facilities, membrane separation has gained significant attention as a potential technique for water treatment. In these directions, MXene which is the advanced 2D material has been explored and many applications were reported. However, research on MXene-based membranes is still in its early stages and reported applications are scatter. This review provides a broad overview of MXenes and their perspectives, including their synthesis, surface chemistry, interlayer tuning, membrane construction, and uses for water purification. Application of MXene based membrane for extracting pollutants such as heavy metals, organic contaminants, and radionuclides from the aqueous water bodies were briefly discussed. Furthermore, the performance of MXene-based separation membranes is compared to that of other nano-based membranes, and outcomes are very promising. In order to shed more light on the advancement of MXene-based membranes and their operational separation applications, significant advances in the fabrication of MXene-based membranes is also encapsulated. Finally, future prospects of MXene-based materials for diverse applications were discussed.

New generation advanced nanomaterials for photocatalytic abatement of phenolic compounds

Nowadays, organic pollutants create severe problems worldwide. Phenolic compounds are the harmful pollutants that are developed from industrial effluents, thus causing several environmental problems. Low-cost materials show good potential capabilities for removal of phenolic compounds but are not so effective, so modification is required. New generation nanocatalysts are thought to be excellent for phenol removal. Removal of phenolic pollutants by photodegradation may lead to the decrement of these problematic groups. In this review, (i) a new generation of catalysts for the removal of phenolic compounds is discussed, (ii) nanocatalysts for photodegradation processes, and (iii) the mechanisms involved in photodegradation processes are also discussed. It is noticeable from the analysis that new generation catalysts for photodegradation processes have been demonstrated for high removal abilities of irrefutable phenolic compounds. Finally, future perspectives are also given in this article for the further development of next-generation catalysts.

Capability of copper-nickel ferrite nanoparticles loaded onto multi-walled carbon nanotubes to degrade acid blue 113 dye in the sonophotocatalytic treatment process

In this study, copper-nickel ferrite (CuNiFe₂O₄) nanoparticles were successfully loaded onto multi-walled carbon nanotubes (MWCNTs) by using the coprecipitation method and used as new catalysts (MWCNT-CuNiFe₂O₄) in the sonophotocatalytic degradation process of the acid blue 113 (AB113) dye. The success of the MWCNT-CuNiFe₂O₄ synthesis and its properties were determined by analyzing it using field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). A high efficiency of dye removal (100%), total organic carbon (93%), and chemical oxygen demand (95%) were achieved with the following conditions: pH of dye solution = 5, MWCNT-CuNiFe₂O₄ dosage = 0.6 g/L, AB113 dye concentration = 50 mg/L, UV light intensity = 36 W, ultrasonic wave frequency = 35 kHz, and treatment time = 30 min. The kinetic results revealed that the efficiency of the sonophotocatalytic process using MWCNT-CuNiFe₂O₄ was higher than that of the sonolysis, photolysis, photocatalysis, and sonocatalysis processes. Scavenging studies demonstrated that the holes (h⁺) and hydroxyl radical (•OH) were the main reactive species for the AB113 dye degradation. The stability and recyclability of MWCNT-CuNiFe₂O₄ were confirmed with eight consecutive cycles for a maximum efficiency of more than 92%. The high rate of BOD₅/COD indicated that the sonophotocatalytic process had the potential to degrade the dye into degradable compounds. The toxicity study with an Escherichia coli growth inhibition rate emphasized that MWCNT-CuNiFe₂O₄ in the sonophotocatalytic degradation process of the AB113 dye had a significant effect on reducing toxicity, when compared to processes of photolysis and photocatalysis. During the sonophotocatalytic process using MWCNT-CuNiFe₂O₄, the AB113 dye was mineralized into CO₂, H₂O, NH₄⁺, NO₃^-, and SO₄^2-. The results of the present study proved that the MWCNT-CuNiFe₂O₄-based sonophotocatalytic process was a promising dye degradation technology to protect the aquatic environment.

Emerging architecture titanium carbide (Ti3C2Tx) MXene based photocatalyst toward degradation of hazardous pollutants: Recent progress and perspectives

MXenes family has aroused marvelous consideration as a frontier photoactive candidate for solar energy transformation and environmental remediation. 2D Ti₃C₂ exhibit a unique layered microstructure, large surface functional groups (-F, -OH, -O), substantial sorption selectivity, superior reduction efficiency, and electrical conductivity. Electronically conductive Ti₃C₂T_x with tunable energy band gap (0.92-1.75eV) makes it one of the most potential photoactive materials for photodegradation. The present review paper aims to design cost-effective heterojunctions and Schottky junctions of Ti₃C₂ with transition metal oxides, sulfides, g-C₃N₄, and other organic frameworks. The discussion mainly involves different aspects related to its tunable electronic structure, stability problems, and surface morphology control. In addition, the advantages of Ti₃C₂ in fabricating highly efficient Ti₃C₂ based catalytic junctions exhibiting suppressed charge carrier recombination are discussed with particular emphasis on their adsorption and redox properties for the removal of toxic dyes, heavy metal ions, and various pharmaceuticals. Finally, current challenges and research directions are outlined and prospected for the future development of Ti₃C₂ based photocatalytic systems.

MXenes as emerging nanomaterials in water purification and environmental remediation

Environmental pollution has accelerated and intensified because of the acceleration of industrialization, therefore fabricating excellent materials to remove hazardous pollutants has become inevitable. MXenes as emerging transition metal nitrides, carbides or carbonitrides with high conductivity, hydrophilicity, excellent structural stability, and versatile surface chemistry, become ideal candidates for water purification and environmental remediation. Particularly, MXenes reveal excellent sorption capability and efficient reduction performance for various contaminants of wastewater. In this regard, a comprehensive understanding of the removal behaviors of MXene-based nanomaterials is necessary to explain how they remove various pollutants in water. The eliminate process of MXene-based nanomaterials is collectively influenced by the physicochemical properties of the materials themselves and the chemical properties of different contaminants. Therefore, in this review paper, the synthesis strategies and properties of MXene-based nanomaterials are briefly introduced. Then, the chemical properties, removal behaviors and interaction mechanisms of heavy metal ions, radionuclides, and organic pollutants by MXene-based nanomaterials are highlighted. The overview also emphasizes associated toxicity, secondary contamination, the challenges, and prospects of the MXene-based nanomaterials in the applications of water treatment. This review can supply valuable ideas for fabricating versatile MXene nanomaterials in eliminating water pollution.

A sensitive environmental forensic method that determines bisphenol S and A exposure within receipt-handling through fingerprint analysis

As human beings have been consistently exposed to bisphenol A (BPA) and bisphenol S (BPS) derived from various products, the intake of BPS/BPA to humans has been extensively studied. However, using conventional biological matrices such as urine, blood, or dissected skin to detect BPS/BPA in the human body system requires longer exposure time to them, hardly defines the pollutant source of the accumulated BPS/BPA, and is often invasive. Herein, our new approach i.e. fingerprint analysis quantitatively confirms the transfer of BPS/BPA from receipts (specific pollution source) to human skin only within receipt-handling of "20 s". When receipts (fingertip region size; ~1 cm²) containing 100-300 μg of BPS or BPA are handled, 20-40 μg fingerprint^-1 of BPS or BPA is transferred to human skin (fingertip). This transferred amount of BPS/BPA can still be toxic according to the toxicity test using water fleas. As a visual evidence, a fingerprint map that matches the distribution of the absorbed BPS/BPA is developed using a mass spectrometry imaging tool. This is the first study to analyze fingerprints to determine the incorporation mechanism of emerging pollutants. This study provides an efficient and non-invasive environmental forensic tool to analyze amounts and sources of hazardous substances.

A comprehensive review on MXenes as new nanomaterials for degradation of hazardous pollutants: Deployment as heterogeneous sonocatalysis

MXene-based nanomaterials (MBNs) are two-dimensional materials that exhibit a series of sought after properties, including rich surface chemistry, adjustable bandgap structures, high electrical conductivity, hydrophobicity, thermal stability, and large specific surface area. MBNs have an exemplar performance when applied for the degradation of hazardous pollutants with various advanced oxidation processes such as heterogeneous sonocatalysis. As such, this work focuses on the sonocatalytic degradation of various hazardous pollutants using MXene-based catalysts. First, the general principles of sonocatalysis are examined, followed by an analysis of the main components of the MXene-based sonocatalysts and their application for pollutant degradation. Lastly, ongoing challenges are highlighted with recommendations to address the issues.

2D/2D Heterojunction systems for the removal of organic pollutants: A review

Photocatalysis is considered to be an effective way to remove organic pollutants, but the key to photocatalysis is finding a high-efficiency and stable photocatalyst. 2D materials-based heterojunction has aroused widespread concerns in photocatalysis because of its merits in more active sites, adjustable band gaps and shorter charge transfer distance. Among various 2D heterojunction systems, 2D/2D heterojunction with a face-to-face contact interface is regarded as a highly promising photocatalyst. Due to the strong coupling interface in 2D/2D heterojunction, the separation and migration of photoexcited electron-hole pairs are facilitated, which enhances the photocatalytic performance. Thus, the design of 2D/2D heterojunction can become a potential model for expanding the application of photocatalysis in the removal of organic pollutants. Herein, in this review, we first summarize the fundamental principles, classification, and strategies for elevating photocatalytic performance. Then, the synthesis and application of the 2D/2D heterojunction system for the removal of organic pollutants are discussed. Finally, the challenges and perspectives in 2D/2D heterojunction photocatalysts and their application for removing organic pollutants are presented.

Application of advanced materials in sonophotocatalytic processes for the remediation of environmental pollutants

Significant advances in various industrial processes have resulted in the discharge of toxic pollutants into the environment. Consequently, it is essential to develop efficient wastewater treatment processes to reduce water contamination and increase recycling/reuse. Photocatalytic degradation is considered as an efficient method for the degradation of toxic pollutants in industrial wastewater. However, the use of photocatalytic approaches is associated with numerous limitations, such as lengthy procedures and the necessity for large amounts of catalysts. Hence, it has been proposed that photocatalysis could be combined with other techniques, including sonolysis, electrochemical, photothermal, microwave, ultrafiltration, and biological reactor. The integration of photocatalysis with sonolysis could be remarkably beneficial for environmental remediation. The combination of these processes has the advantages of using uniformly dispersed catalysts, regeneration of the catalyst surface, improved mass transfer, enhanced surface area due to smaller catalyst particles, and production of more active radicals for the degradation of organic pollutants. In this review, an overview on employing sonophotocatalysis for the removal of toxic organic contaminants from aqueous environments is provided. Additionally, the limitations of photocatalysis alone and the fundamental sonophotocatalytic mechanistic pathways are discussed. The importance of utilizing advanced two-dimensional (2D) semiconductor materials in sonophotocatalysis and the common synthetic approaches for the preparation of 2D materials are also highlighted. Lastly, the review provides comprehensive insights into different materials based on metal oxides, chalcogenides, graphene, and metal organic frameworks (MOFs), which are involved in sonophotocatalytic processes employed for the remediation of environmental pollutants.